| Age | Commit message (Collapse) | Author |
|---|
|
YP is not a build system, so it can not be used as build system example.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The submodule sources fetched by the gitsm fetcher are not automatically
tracked by the licensing and archiver infrastructures.
Add these limitations to the existing 'warnings' sections for
gitsm.
[YOCTO #11594]
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #12031]
Applied minor wording changes based on review feedback.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #12029]
There were four links to an old blog post that was leveraged
for the hello world example. The post has evidently been
removed and the links no longer resolved. I have taken them out.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #12031]
Moved an inappropriate example from the bottom of the INHERIT
Configuration Directive section up into the inherit directive
section.
Updated the example at the end of the INHERIT Configuration
Directive section to apply to INHERIT.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #12032]
I applied some re-writing to help clarify the relationships between
the inherit, include, and require directives.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #11675]
THere was a "hambedded" link that was broken. The link was
intended to give additional information on adding layers.
Replaced with link about layers and replaced the wording.
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #11675]
There was a "hambedded" link that was broken. The link was
intended to show the bitbake.conf file. I replaced it
with the link to show the actual bitbake.conf file.
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Just discovered a minor issue in the bitbake manual - under the variable
glossary entry for BBLAYERS_FETCH_DIR we say there's a default value of
${COREBASE} but that's not actually true in bitbake itself - there's no
default in bitbake, that default is set in OE-Core. We can keep this in the YP
ref manual but in the bitbake manual that sentence should be removed.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
'buildCompleted' should be 'BuildCompleted'.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #11498]
Enhanced the glossary description for the INHERIT variable to give more
detail and to cross-reference the reader back into the Chapter 3
section describing its use.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This has long since been deprecated and is no longer used anywhere, FILESPATH
is the commonly used varaible which offers much more flexibility. Remove
the FILESDIR code and references from bitbake.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #9962]
The new output for -D was copied into the manual and merged by
the engineering team before checking to see if the manual
would make properly. The next output for -D introduced an
error through the string "<task>". The angled bracket
characters are illegal in docbook and must be replaced by
"<" and ">", respectively. I made this fix.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Expanded and clarify documentation for the -v, --verbose and -D, --debug
options.
[YOCTO #9962]
Signed-off-by: Diana Thayer <garbados@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10405]
The section on the SVN Fetcher was missing information on the
"path_spec" option. I added this option and also updated the
examples at the bottom of the section to include that parameter.
Also, made the other two examples consistent.
I also removed the "date" parameter.
Also, updated the "protocol" parameter as well as the "modify"
parameter. For "modify" I removed the reference to "rsh". I
applied a small wording change to the "protocol" parameter.
Finally, I added a new "ssh" parameter.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
The package-depends.dot and pn-depends.dot files are inaccurate,
missing out key dependencies such those made via the [depends]
flags. As such they can be misleading to the user.
They mainly exist for historical reasons, coming from a time
before we had task based execution.
This commit removes the two dated file formats and replaces
them with a recipe-depends.dot which is a flattened version
of task-depends.dot.
The old format files are removed if present so that the user
can't get confused about why data might not match between files.
The code is also rewritten to use 'with f: f.write()' syntax as
is more commonly used now. Also update the docs to match the change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The package-depends.dot and pn-depends.dot files are inaccurate, missing
out key dependencies such those made via the [depends] flags. As such
they can be misleading to the user.
They mainly exist for historical reasons, coming from a time before
we had task based execution.
This commit removes the two dated file formats and replaces them with
a recipe-depends.dot which is a flattened version of task-depends.dot.
The old format files are removed if present so that the user can't get
confused about why data might not match between files.
The code is also rewritten to use 'with f: f.write()' syntax as is more
commonly used now.
Also update the docs to match the change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The depexp UI has been replaced with taskexp, also remove old
references to goggle and hob.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a stra quote character after the word database
and I removed it.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10886]
Added text descriptions for many of the events in the list of the
"Events" section.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10444]
Added a new section about syntax called "Line Joining". The
section describes how you can use the backslash character (\)
to joing stuff.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The BB_SETSCENE_VERIFY_FUNCTION variable has effectively changed
to BB_SETSCENE_VERIFY_FUNCTION2. I changed the three areas in the
book. Basically a name change.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10401]
Applied some edits to various areas of the section. These
were minor in nature.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10401]
Added some wording to clarify that setting these flags to "1"
causes the desired action. Also, provided a cautionary note
about tasks depending on any [nostamp] task causes the task
to always be executed and could cause unnecessary rebuild time.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10401]
The "addtask" documentation was rewritten to tighten up the
introductory section and to flesh out the actual examples.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10400]
No information existed for cases when a variable did not exist.
I added this information to each of the variables in the table.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10364]
Added a new section titled "Bitbake-Style Python Functions
Versus Python Functions". This section describes differences
for the user between the two types of functions.
Also, cleaned up a consistency problem with the terms
"BitBake style" and "BitBake-style". I used the latter
throughout the manual.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10296]
Applied some minor wording changes per review edits.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10296]
This adds some bits clarifying you can append and prepend to
functions. Added a bit to the introduction paragraph of the
"Appending and Prepending (Override Style Syntax)" section to
note that you can do this. Referenced some new examples.
In the "Shell Functions" section I added an example. In the
"BitBake Style Python Functions" section I also added an example.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10293]
I omitted the work "quote" and needed to have it there.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10293]
In the section about setting variables, I added a paragraph that
explains the use of single quotes when setting a variable. The
case covers when you must have the double quote charater as part
of your variable's value.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10100]
I added a new parent directory named "Functions You Can Call From
Within Python". This section contains a couple new sub-sections.
One is the existing "Functions for Accessing Datastore Variables".
The other is called "Other Functions", and it is used to point
or reference some commonly used functions that the user can call
from within Python.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10196]
Added a new section named "Exporting Variables to the Environment".
This section provides a dedicated description for how to export
variables to the shell.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10141]
Section on Checksums (Signatures) had this variable referred to as
STAMP_DIR.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
unset VAR
will clear variable VAR
unset VAR[flag]
will clear flag "flag" from var VAR
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10117]
Applied a re-write to better clarify the behavior of dependencies.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10095]
I added a third case to the "Conditional Metadata" section to
describe setting a variable for a single task.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10093]
Provided much more detail on how these functions work.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10071]
The use of any flags throughout the manual was very inconsistent.
I changed all references to any named flag in the text to be
formatted as code and to be enclosed in square brackets.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #10071]
Provided more clear descriptions for these two flags.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #9985]
Fixed an operator typo from ":=" to "+=" in the note
at the bottom of the section.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #7718]
In the "Executing a List of Task and Recipe Combinations"
section, I changed the improper bitbake command example to
use the correct syntax. This change was review feedback.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10011]
Added paragraphs near the end to describe the role of virtual
targets.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #10003]
I added a small paragraph explaining what happens when expansion
of a variable that does not exist occurs.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #9985]
Fixed some problems with the changes. A small typo for an
example and added a clarifying operator in another sentence.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
Fixes [YOCTO #9984]
Added a small note to the bottom to help clarify.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
|
I had inconsistent usage of the "_append" style operator syntax
in the chaper. I was using a mix of <filename>_append</filename>
and "_append". I changed to "_append" for consistency.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
|
Leonardo Sandoval
Mikko Ylinen
Scott Rifenbark
Kristi Rifenbark
Ming Liu
Richard Purdie
Diana Thayer
Joshua Lock
Jérémy Rosen