| Age | Commit message (Collapse) | Author |
|---|
|
When Toaster removes a package from a custom image, it must
also always remove the advised reverse-dependent recipes.
Similarly, when adding a package it must always add its advised
the packages it depends on. This code must be un-indented so
that it applies to all respective added or removed packages.
Toaster normally waits until a new custom image is built before
creating the custom layer and the recipe. However, an intermediate
different build can fail because the recipe has already been added
to the project, so the image's default recipe must be created
when the image is created.
[YOCTO #11915]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the ability to select a distro in the project page,
based on values from the Layer Index. Add a distro selection
page with the add layer feature, based on the add machine
page.
[YOCTO #10632]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a get API for returning information about layers.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add layer adding REST api and remove old views method.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes the unidentified layers issue by making the
toaster-custom-images layer a local layer. By doing this we also fix the
git assumptions made for the local layers which stop recipes and other
meta data being associated with them. This also removed some of the
special casing previously needed when we didn't have the concept of a
local (non git) layer.
Also rename created flag var to a have a different var for each returned
value so that the same value isn't used multiple times.
[YOCTO #10220]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the delete notifications to reflect feedback from design
review comments.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before we finally delete any project make sure we send the cancel command to
any in-progress builds. This ensures that an inaccessible build doesn't block
up the system and that we don't get errors after deletion.
[YOCTO #10289]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the implementation of delete an imported layer so that it is
consistent with the other delete messages and wording. Also use the new
libtoaster way of setting a notification that the delete was successful.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add confirm modal and api calls to delete a project from the project
dashboard.
[YOCTO #6238]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This view is specific to the builds dashboard rather than gernic api so
like ToasterTable and ToasterTypeAhead we class it as a widget as it has
a single purpose. Also clean up some flake8 identified issues.
Original author of the code moved in this commit is Elliot Smith.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Convert the project xhr calls into proper rest api and port the client
side calls to use the new API. Fix all the pyflakes identified issues
and clean up unused fields.
Also remove the api and client side code for changing release on the fly
as this is no longer supported.
[YOCTO #9519]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now have a dedicated file for the rest API so move and rework for
class based views. Also clean up all flake8 identified warnings.
Remove unused imports from toastergui views.
The original work for this API was done by Elliot Smith, Ed Bartosh,
Michael Wood and Dave Lerner
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A few clean ups for the work done to integrate editing imported local layers
into the layer detail page.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an additional argument to the api to handle
local_source_dir which is the value user passes
to import non-git layers.
[YOCTO #9913]
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify buildinfohelper and toasterui so that they record the
recipe parse progress (from ParseProgress events in bitbake)
on the Build object.
Note that because the Build object is now created at the
point when ParseStarted occurs, it is necessary to set the
build name to the empty string initially (hence the migration).
The build name can be set when the build properly starts,
i.e. at the BuildStarted event.
Then use this additional data to determine whether a Build
is in a "Parsing" state, and report this in the JSON API.
This enables the most recent builds area to show the recipe
parse progress.
Add additional logic to update the progress bar if the progress
for a build object changes.
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
The most recent builds area of the all builds and project builds
table needs to update as a build progresses. It also needs
additional functionality to show other states (e.g. recipe parsing,
queued) which again needs to update on the client side.
Rather than add to the existing mix of server-side templating
with client-side DOM updating, translate all of the server-side
templates to client-side ones (jsrender), and add logic which
updates the most recent builds area as the state of a build changes.
Add a JSON API for mostrecentbuilds, which returns the state of
all "recent" builds. Fetch this via Ajax from the build dashboard
(rather than fetching the ad hoc API as in the previous version).
Then, as new states for builds are fetched via Ajax, determine
whether the build state has changed completely, or whether the progress
has just updated. If the state completely changed, re-render the
template on the client side for that build. If only the progress
changed, just update the progress bar. (NB this fixes the
task progress bar so it works for the project builds and all builds
pages.)
In cases where the builds table needs to update as the result of
a build finishing, reload the whole page.
This work highlighted a variety of other issues, such as
build requests not being able to change state as necessary. This
was one part of the cause of the "cancelling build..." state
being fragile and disappearing entirely when the page refreshed.
The cancelling state now persists between page reloads, as the
logic for determining whether a build is cancelling is now on
the Build object itself.
Note that jsrender is redistributed as part of Toaster, so
a note was added to LICENSE to that effect.
[YOCTO #9631]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
|
|
Replace references to the now deprecated layersource models across
Toaster with the new enums for layer source types.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also clean up flake8 warnings in XhrBuildRequest
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update, clean up and move the api for updating a layerversion from the
views to api. Also update the layerdetails page to include the
layerversion id in the url getter.
[YOCTO #8952]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
translate has different set of parameters in python 3 and
can't be used the way it's used in toaster api module.
Replacing it with re.sub() should make the code work in
both python 2 and python 3.
[YOCTO #9584]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the implementation of the backend api for cancelling builds with
the new cancelling BuildRequest state and cancelled Build state.
Also added some docstring about general usage.
Co-Author: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the backend xhr implementation of the build request changes
into it's own file and out of the ToasterTable definition.
It used to live in the views.py but in a hope of starting to collate logical
groups of views move this to a new file called api.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
David Reyna
Michael Wood
Sujith H
Elliot Smith
Ed Bartosh