1 files changed, 0 insertions, 73 deletions
diff --git a/recipes-kernel/linux/linux-yocto-3.14/h1940/0010-ARM-s3c24xx-h1940-add-IR-switch.patch b/recipes-kernel/linux/linux-yocto-3.14/h1940/0010-ARM-s3c24xx-h1940-add-IR-switch.patch
deleted file mode 100644
index 851f0f1..0000000
--- a/recipes-kernel/linux/linux-yocto-3.14/h1940/0010-ARM-s3c24xx-h1940-add-IR-switch.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 79a09055ff091d60bdedff17150d1ca15233db44 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Sun, 18 Dec 2011 11:29:30 +0300
-Subject: [PATCH 10/17] ARM: s3c24xx: h1940: add IR switch
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
----
- arch/arm/mach-s3c24xx/mach-h1940.c | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
-diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
-index fb2d5a1..df0e89f 100644
---- a/arch/arm/mach-s3c24xx/mach-h1940.c
-+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
-@@ -718,6 +718,29 @@ static struct gpiod_lookup_table bt_gpio_lookup = {
- 	},
- };
- 
-+static struct rfkill_gpio_platform_data h1940_ir_rfkill_pdata = {
-+	.name		= "h1940-ir",
-+	.reset_gpio	= -EINVAL,
-+	.shutdown_gpio	= S3C2410_GPB(9),
-+	.type		= RFKILL_TYPE_IR,
-+};
-+
-+static struct platform_device h1940_irda = {
-+	.name		= "rfkill_gpio",
-+	.id		= 1,
-+	.dev		= {
-+		.platform_data = &h1940_ir_rfkill_pdata,
-+	},
-+};
-+
-+static struct gpiod_lookup_table ir_gpio_lookup = {
-+	.dev_id = "h1940-ir",
-+	.table = {
-+		GPIO_LOOKUP_IDX("GPIOB", 9, NULL, 0, GPIO_ACTIVE_LOW),
-+		{ },
-+	},
-+};
-+
- static struct platform_device *h1940_devices[] __initdata = {
- 	&h1940_dev_buttons,
- 	&s3c_device_ohci,
-@@ -739,6 +762,7 @@ static struct platform_device *h1940_devices[] __initdata = {
- 	&power_supply,
- 	&h1940_battery,
- 	&h1940_bluetooth,
-+	&h1940_irda,
- };
- 
- static void __init h1940_map_io(void)
-@@ -819,10 +843,17 @@ static void __init h1940_init(void)
- 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
- 	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
- 
-+	/* Configure IR serial port GPIOs */
-+	s3c_gpio_cfgpin(S3C2410_GPH(6), S3C2410_GPH6_TXD2);
-+	s3c_gpio_setpull(S3C2410_GPH(6), S3C_GPIO_PULL_NONE);
-+	s3c_gpio_cfgpin(S3C2410_GPH(7), S3C2410_GPH7_RXD2);
-+	s3c_gpio_setpull(S3C2410_GPH(7), S3C_GPIO_PULL_NONE);
-+
- 	gpio_request(S3C2410_GPC(9), "BT reset");
- 	gpio_direction_output(S3C2410_GPC(9), 1);
- 
- 	gpiod_add_lookup_table(&bt_gpio_lookup);
-+	gpiod_add_lookup_table(&ir_gpio_lookup);
- 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
- 
- 	gpio_request(S3C2410_GPA(1), "Red LED blink");
--- 
-1.9.3
-