aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--meta-oe/recipes-navigation/gpsd/gpsd/60-gpsd.rules47
-rwxr-xr-xmeta-oe/recipes-navigation/gpsd/gpsd/gpsd136
-rw-r--r--meta-oe/recipes-navigation/gpsd/gpsd/gpsd-default5
-rw-r--r--meta-oe/recipes-navigation/gpsd/gpsd/gpsd.service10
-rw-r--r--meta-oe/recipes-navigation/gpsd/gpsd_3.16.bb12
5 files changed, 4 insertions, 206 deletions
diff --git a/meta-oe/recipes-navigation/gpsd/gpsd/60-gpsd.rules b/meta-oe/recipes-navigation/gpsd/gpsd/60-gpsd.rules
deleted file mode 100644
index 61143b8f6..000000000
--- a/meta-oe/recipes-navigation/gpsd/gpsd/60-gpsd.rules
+++ /dev/null
@@ -1,47 +0,0 @@
-# udev rules for gpsd
-# $Id$
-#
-# GPSes don't have their own USB device class. They're serial-over-USB
-# devices, so what you see is actually the ID of the serial-over-USB chip.
-# Fortunately, just two of these account for over 80% of consumer-grade
-# GPS sensors. The gpsd.hotplug.wrapper script will tell a running gpsd
-# that it should look at the device that just went active, because it
-# might be a GPS.
-#
-# The following setup works on Debian - something similar will apply on
-# other distributions:
-#
-# /etc/udev/gpsd.rules
-# /etc/udev/rules.d/025_gpsd.rules -> ../gpsd.rules
-# /lib/udev/gpsd.hotplug.wrapper
-# /lib/udev/gpsd.hotplug
-#
-# Setting the link in /etc/udev/rules.d activates the rule and determines
-# when to run it on boot (similar to init.d processing).
-
-SUBSYSTEM!="tty", GOTO="gpsd_rules_end"
-
-# Prolific Technology, Inc. PL2303 Serial Port
-ATTR{idVendor}=="067b", ATTR{idProduct}=="2303", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# ATEN International Co., Ltd UC-232A Serial Port [pl2303]
-ATTR{idVendor}=="0557", ATTR{idProduct}=="2008", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# FTDI 8U232AM
-ATTR{idVendor}=="0403", ATTR{idProduct}=="6001", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# Cypress M8/CY7C64013 (DeLorme uses these)
-ATTR{idVendor}=="1163", ATTR{idProduct}=="0100", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# PS-360 OEM (Microsoft GPS sold with Street and Trips 2005)
-ATTR{idVendor}=="067b", ATTR{idProduct}=="aaa0", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# Garmin International GPSmap, various models (tested with Garmin GPS 18 USB)
-ATTR{idVendor}=="091e", ATTR{idProduct}=="0003", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# Cygnal Integrated Products, Inc. CP210x Composite Device (Used by Holux m241)
-ATTR{idVendor}=="10c4", ATTR{idProduct}=="ea60", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# u-blox AG, u-blox 5 (tested with Navilock NL-402U)
-ATTR{idVendor}=="1546", ATTR{idProduct}=="01a5", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# FTDI FT232
-ATTR{idVendor}=="0403", ATTR{idProduct}=="6001", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-# u-blox 4
-ATTR{idVendor}=="1546", ATTR{idProduct}=="01a4", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-
-ACTION=="remove", RUN+="/lib/udev/gpsd.hotplug.wrapper"
-
-LABEL="gpsd_rules_end"
diff --git a/meta-oe/recipes-navigation/gpsd/gpsd/gpsd b/meta-oe/recipes-navigation/gpsd/gpsd/gpsd
deleted file mode 100755
index ba73dafb2..000000000
--- a/meta-oe/recipes-navigation/gpsd/gpsd/gpsd
+++ /dev/null
@@ -1,136 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides: gpsd
-# Required-Start: $remote_fs $network
-# Should-Start: bluetooth dbus udev
-# Required-Stop: $remote_fs $network
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: GPS (Global Positioning System) daemon start/stop script
-# Description: Start/Stop script for the gpsd service daemon,
-# which is able to monitor one or more GPS devices
-# connected to a host computer, making all data on
-# the location and movements of the sensors available
-# to be queried on TCP port 2947.
-### END INIT INFO
-
-# Author: Bernd Zeimetz <bzed@debian.org>
-#
-# Please remove the "Author" lines above and replace them
-# with your own name if you copy and modify this script.
-
-# Do NOT "set -e"
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="GPS (Global Positioning System) daemon"
-NAME=gpsd
-DAEMON=/usr/sbin/$NAME
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x "$DAEMON" ] || exit 0
-
-# Read configuration, if present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-if [ -z "$GPSD_SOCKET" ] && [ -z "$DEVICES" ]; then
- GPSD_SOCKET=/var/run/gpsd.sock
-fi
-
-if [ -n "$GPSD_SOCKET" ]; then
- GPSD_OPTIONS="$GPSD_OPTIONS -F $GPSD_SOCKET"
-fi
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
- # Return
- # 0 if daemon has been started
- # 1 if daemon was already running
- # 2 if daemon could not be started
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test \
- -- $GPSD_OPTIONS -P $PIDFILE $GPS_DEVICES > /dev/null \
- || return 1
- start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
- $GPSD_OPTIONS -P $PIDFILE $GPS_DEVICES \
- || return 2
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
- # Return
- # 0 if daemon has been stopped
- # 1 if daemon was already stopped
- # 2 if daemon could not be stopped
- # other if a failure occurred
- start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
- RETVAL="$?"
- [ "$RETVAL" = 2 ] && return 2
- # Many daemons don't delete their pidfiles when they exit.
- rm -f $PIDFILE
- return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
- #
- # If the daemon can reload its configuration without
- # restarting (for example, when it is sent a SIGHUP),
- # then implement that here.
- #
- start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
- return 0
-}
-
-case "$1" in
- start)
- echo "Starting $DESC" "$NAME"
- do_start
- exit $?
- ;;
- stop)
- echo "Stopping $DESC" "$NAME"
- do_stop
- exit $?
- ;;
- status)
- ;;
- reload|force-reload)
- echo "Reloading $DESC" "$NAME"
- do_reload
- exit $?
- ;;
- restart)
- #
- # If the "reload" option is implemented then remove the
- # 'force-reload' alias
- #
- echo "Restarting $DESC" "$NAME"
- do_stop
- case "$?" in
- 0|1)
- do_start
- exit $?
- ;;
- *)
- # Failed to stop
- exit 1
- ;;
- esac
- ;;
- *)
- echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
- exit 3
- ;;
-esac
-
-:
diff --git a/meta-oe/recipes-navigation/gpsd/gpsd/gpsd-default b/meta-oe/recipes-navigation/gpsd/gpsd/gpsd-default
deleted file mode 100644
index 0ceff0382..000000000
--- a/meta-oe/recipes-navigation/gpsd/gpsd/gpsd-default
+++ /dev/null
@@ -1,5 +0,0 @@
-# If you must specify a non-NMEA driver, uncomment and modify the next line
-GPSD_SOCKET="/var/run/gpsd.sock"
-GPSD_OPTIONS=""
-GPS_DEVICES=""
-
diff --git a/meta-oe/recipes-navigation/gpsd/gpsd/gpsd.service b/meta-oe/recipes-navigation/gpsd/gpsd/gpsd.service
deleted file mode 100644
index 7131a589d..000000000
--- a/meta-oe/recipes-navigation/gpsd/gpsd/gpsd.service
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=GPS (Global Positioning System) Daemon
-Requires=gpsd.socket
-
-[Service]
-EnvironmentFile=/etc/default/gpsd
-ExecStart=/usr/sbin/gpsd -N $GPS_DEVICES
-
-[Install]
-Also=gpsd.socket
diff --git a/meta-oe/recipes-navigation/gpsd/gpsd_3.16.bb b/meta-oe/recipes-navigation/gpsd/gpsd_3.16.bb
index 26d74867b..4c2e328e8 100644
--- a/meta-oe/recipes-navigation/gpsd/gpsd_3.16.bb
+++ b/meta-oe/recipes-navigation/gpsd/gpsd_3.16.bb
@@ -11,10 +11,6 @@ SRC_URI = "${SAVANNAH_GNU_MIRROR}/${BPN}/${BP}.tar.gz \
file://0001-SConstruct-prefix-includepy-with-sysroot-and-drop-sy.patch \
file://0004-SConstruct-disable-html-and-man-docs-building-becaus.patch \
file://0001-include-sys-ttydefaults.h.patch \
- file://gpsd-default \
- file://gpsd \
- file://60-gpsd.rules \
- file://gpsd.service \
"
SRC_URI[md5sum] = "68691b5de4c94f82ec4062b042b5eb63"
SRC_URI[sha256sum] = "03579af13a4d3fe0c5b79fa44b5f75c9f3cac6749357f1d99ce5d38c09bc2029"
@@ -67,13 +63,13 @@ do_install() {
do_install_append() {
install -d ${D}/${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/gpsd ${D}/${sysconfdir}/init.d/
+ install -m 0755 ${S}/packaging/deb/etc_init.d_gpsd ${D}/${sysconfdir}/init.d/gpsd
install -d ${D}/${sysconfdir}/default
- install -m 0644 ${WORKDIR}/gpsd-default ${D}/${sysconfdir}/default/gpsd.default
+ install -m 0644 ${S}/packaging/deb/etc_default_gpsd ${D}/${sysconfdir}/default/gpsd.default
#support for udev
install -d ${D}/${sysconfdir}/udev/rules.d
- install -m 0644 ${WORKDIR}/60-gpsd.rules ${D}/${sysconfdir}/udev/rules.d
+ install -m 0644 ${S}/gpsd.rules ${D}/${sysconfdir}/udev/rules.d/
install -d ${D}${base_libdir}/udev/
install -m 0755 ${S}/gpsd.hotplug ${D}${base_libdir}/udev/
@@ -83,7 +79,7 @@ do_install_append() {
#support for systemd
install -d ${D}${systemd_unitdir}/system/
- install -m 0644 ${WORKDIR}/${BPN}.service ${D}${systemd_unitdir}/system/${BPN}.service
+ install -m 0644 ${S}/systemd/${BPN}.service ${D}${systemd_unitdir}/system/${BPN}.service
install -m 0644 ${S}/systemd/${BPN}.socket ${D}${systemd_unitdir}/system/${BPN}.socket
}