aboutsummaryrefslogtreecommitdiffstats
path: root/meta-networking/recipes-daemons
AgeCommit message (Collapse)Author
2017-02-22lldpd: Update to version 0.9.6Fabio Berton
This update includes following changes: lldpd (0.9.6) * Changes: + Add a compile-time option to restore pre-0.9.2 JSON format (when using json-c). Use `--enable-json0` to enable this option. + Support for newer ethtool interface on Linux (ETHTOOL_GLINKSETTINGS) and additional speed settings. + Current MAU type is displayed even when autoneg is off. + Increase netlink receive buffer by default. Can be changed at compile-time through ./configure. * Fixes: + Correctly parse LLDP-MED civic address when the length of the TLV exceeds the length of the address. + Fix 100% CPU on some rare error condition. + Fix lost timer when an interface is enslaved on Linux. lldpd (0.9.5) * Changes: + More Ethernet media supported. However, RFC4836 is quite out-of-date with respected to 10G+ speeds, bringing some inaccuracies. + Directly get media information for an interface without using the privileged process. + LLDP-MED capability TLV is not sent when LLDP-MED is not enabled, even if other LLDP-MED TLV are present. * Fixes: + Compilation fix with older versions of GCC. + Don't use ethtool at all to get real MAC address for enslaved devices (always use /proc). lldpd (0.9.4) * Changes: + Make lldpd accepts a `-p` option to specify the PID file. + Ability to change multicast MAC address to two additional values to reach customer bridges. + lldpcli will now display chassis TTL when detailed view is enabled. * Fixes: + Fix setting of local value for port ID. + Fix compilation with BSD make. + Ensure lldpcli returns an error code on invalid commands. lldpd (0.9.3) * Changes: + Do not rely on support of constructors for liblldpctl. + Always log to stderr (even in addition to syslog). + `lldpcli watch` accepts a limit on the number of received events. * Fixes: + `lldpcli -f {xml,json} watch` should work now. + Consider `veth` interfaces as physical interfaces. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2017-02-13remove some more True options to getVar callsAndre McCurdy
getVar() now defaults to expanding by default, thus remove the True option from getVar() calls. Fix a small number of cases not addressed by the original patch: http://git.openembedded.org/meta-openembedded/commit/?id=efd3696e70a6603f1a45faa4a172433514f0a487 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-12-15opensaf: fix QA Issuedengke.du@windriver.com
Move the do_sysvinit_install contents to do_install_append. Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-12-14tftp-hpa: fix ALTERNATIVE_PRIORITY to avoid conflictChen Qi
Fix ALTERNATIVE_PRIORITY to avoid the same priority of the 'tftp' utility with that from busybox. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-12-14postfix: add dependency icuKai Kang
It calls icu-config to detect icu support in file makedefs of postfix. The compile results are different depends on whether icu has been built already. postfix should provide Unicode support, so add dependency icu to solve the problem. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-12-14igmpproxy: Add recipeKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-12-14iscsi-initiator-utils: Update to 2.0.874Joe MacDonald
The latest iscsi-initiator-utils has been available for a while now, update our recipe. The new version no longer bundles its own ISNS server, so this update brings in open-isns as a dependency. As open-isns depends on systemd, add systemd to REQUIRED_DISTRO_FEATURES Additionally, open-iscsi.org is defunct, the new home is at open-iscsi.com, update the SRC_URI and homepage accordingly. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-12-14squid: disable gnu atomic operations for mipselJackie Huang
Disable GNU atomic operations for mipsel since it's not supported. Refer to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56300: There is no hardware support for 8 bytes atomic operations on 32-bit MIPS targets. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-11-14vblade: fix QA warning for GNU_HASHYi Zhao
Add LDFLAGS variable to Makefile so that extra linker flags can be sent via this variable. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-11-14iscsi-initiator-utils: fix postinstall and systemd service fileQi.Chen@windriver.com
Fix postinstall and systemd service file so that the postinstall script does not fail at rootfs time. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-10-20atftp: fixes musl libc buildMing Liu
The patches derive from buildroot: https://git.busybox.net/buildroot/commit/?id=ef33c008e3c5048d1442f8b0f6336db2fa8d79a1 Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-10-20squid: fix ptest failureYi Zhao
Fix error when run ptest on target: cp: cannot stat '/usr/bin/true': No such file or directory make: *** [Makefile:1120: squid-conf-tests] Error 1 The correct path should be /bin/true on target. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-10-20squid: specify sysconfdir and logdirYi Zhao
The default sysconfdir is /etc and logdir is /var/logs. Set sysconfdir and logdir when configure, replace them with /etc/squid and /var/log/squid. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-12vsftpd: allow sysinfo() in the seccomp sandboxMingli Yu
* Allow sysinfo() in the seccomp sandbox otherwise comes below OOPS: priv_sock_get_cmd as the syscall sysinfo() not allowed tnftp 192.168.1.1 Connected to 192.168.1.1. 220 (vsFTPd 3.0.3) Name (192.168.1.1:root): anonymous 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> prompt Interactive mode off. ftp> mget small* OOPS: priv_sock_get_cmd * use "strace -ff /usr/sbin/vsftpd" to track in both seccomp sandbox on and seccomp sandbox off (add seccomp_sandbox=NO in /etc/vsftpd.conf) scenarios when type the commands at ftp client as above, the ftp connection at server side ends up each time with SIGSYS when call sysinfo() syscall in seccomp sandbox on case, so we need to add sysinfo() in the seccomp sandbox if still use seccomp sandbox for vsftpd * The issue still exists in other distribution, Please check https://bugzilla.redhat.com/show_bug.cgi?id=845980 for details And check ftp://195.220.108.108/linux/fedora/linux/updates/\ 24/SRPMS/p/proftpd-1.3.5b-2.fc24.src.rpm for fedora, there is even a patch vsftpd-3.0.2-seccomp.patch as below to turn off seccomp sandbox for vsftpd by default which also means fedora doesn't limit the syscall any more by default. From dd86a1c28f11fa67b1263d5dc79fa9953629d30d Mon Sep 17 00:00:00 2001 From: Martin Sehnoutka <msehnout@redhat.com> Date: Fri, 8 Apr 2016 15:03:16 +0200 Subject: [PATCH 1/7] vsftpd-3.0.2-seccomp --- tunables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tunables.c b/tunables.c index 93f85b1..b024be4 100644 --- a/tunables.c +++ b/tunables.c @@ -232,7 +232,7 @@ tunables_load_defaults() tunable_isolate_network = 1; tunable_ftp_enable = 1; tunable_http_enable = 0; - tunable_seccomp_sandbox = 1; + tunable_seccomp_sandbox = 0; tunable_allow_writeable_chroot = 0; tunable_accept_timeout = 60; Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-12proftpd: remove the script ftpmailMingli Yu
* Remove the ftpmail script to avoid confusion about it fails to run because it lacks a dependency on Mail/Sendmail.pm which is not shipped by default. Also it has not been maintained for more than 10 years as http://search.cpan.org/~mivkovic/Mail-Sendmail/Sendmail.pm. * And it's bad to add the dependency perl module Mail/Sendmail.pm as it's too old and also send email to Proftp-devel@lists.sourceforge.net to ask guidance about ftpmail as below: Q: In my environment, the ftpmail fails to run as it lacks the dependency on Mail/Sendmail.pm which is not shipped by default and also not maintained more than 10 years as http://search.cpan.org/~mivkovic/Mail-Sendmail/Sendmail.pm. A: Patches for updates to the ftpmail script are highly encouraged! If the Mail-Sendmail package is not to your preference, what would you suggest/prefer using instead? We don't plan to do more improvements about the perl module Mail-Sendmail now since it's not something we, or other distros apparently need as other distribution also not include the ftpmail script. * The ftpmail is initially added as a perl script to send an email notification when upload proftpd log as below commit in https://github.com/proftpd/proftpd.git: commit 8d602d4bf01ef0c6464c7a16dbbe570a0322dc17 Author: castaglia <castaglia> Date: Thu Mar 6 03:06:14 2008 +0000 Added ftpmail, a Perl script which reads a TransferLog FIFO and sends automatic email notifications for uploads. Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-05squid: don't do squid-conf-tests at build timeJackie Huang
* squid-conf-tests is a test to run "squid -k parse -f" to perse the config files, which should not be run at build time since we are cross compiling, so remove it when compiling test-suite * Fix the directories of the conf files for squid-conf-tests so that it can run on the target and add it for ptest Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-05tftp-hpa: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-05squid: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-05cyrus-sasl: control ipv6 support based on DISTRO_FEATURESJackie Huang
Add PACKAGECONFIG for ipv6 and control it based on DISTRO_FEATURES. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-05squid: add missing patch headerYi Zhao
Add upstream-status and signed-off-by line to the patch to obey the recommendations: http://openembedded.org/wiki/Commit_Patch_Message_Guidelines#Patch_Header_Recommendations Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-09-05postfix: 3.0.3 -> 3.1.1Mingli Yu
* Upgrade postfix from 3.0.3 to 3.1.1 Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-22meta-oe: remove trailing spacesMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-08-22meta-oe: fix indentationMartin Jansa
* remove tabs which sneaked in since last cleanup * meta-oe layers are using consistent indentation with 4 spaces, see http://www.openembedded.org/wiki/Styleguide Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-08-16proftpd: 1.3.5a -> 1.3.5bMingli Yu
* Upgrade proftpd from 1.3.5a to 1.3.5b * Remove two backport patches Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-16radvd: 2.11 -> 2.14Kai Kang
Upgrade radvd from 2.11 to 2.14. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-16opensaf: make sure /etc/init.d/opensafd existDai Caiyun
when disable sysvinit and specify "systemd" in DISTRO_FEATURES, the recipe "inhert systemd" will delete "/etc/init.d/opensafd",but "/etc/init.d/opensafd" is needed to start opensafd.service. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-16proftpd: fix system account login failureMingli Yu
When pam is enabled, 1, Customize the proftpd.conf to use pam to authenticate 2, Add proftpd pam configuration file /etc/pam.d/proftpd Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-16squid: fix configure host contaminationYue Tao
When configuring squid with --enable-esi option, the following error was observed: [snip] checking libxml/parser.h usability... no checking libxml/parser.h presence... no checking for libxml/parser.h... no configure: Failed to find libxml2 header file libxml/parser.h [snip] ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities. [snip] It tried to search libxml header file in host path. Set the SYSROOT to avoid this host contamination. Signed-off-by: Yue Tao <yue.tao@windriver.com> Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-05proftpd: return stderr to syslogJoe MacDonald
Commit f8dd8cde90c4d6c945177117953e7123e1401236 removed the StandardError option from the proftpd service file, re-introduce it. Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-05proftpd: clean the host path in prxsJackie Huang
prxs (PRoftpd eXtenSion tool) is a perl script, in which the host path should be avoided. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-05proftpd: fix PACKAGECONFIG settingsJoe Slater
When using '??=' to set a variable, '+=' will cause the '??=' value to be discarded. We change how PACKAGECONFIG is defined. We also do not make sia support a default since it is not likely to be available. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-05proftpd: start at boot timeJoe Slater
Add information to proftpd.service so that it will be started at boot time. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-05squid: upgrade to 3.5.20Jackie Huang
* Remove the blacklist since the issue is gone with new version * Remove two CVE patches which have been fixed: - CVE-2016-3947 and CVE-2016-4553 * Rebased the patch for ptest. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-08-05atftp: do not create user nobodyJoe Slater
The recipe for atftp inherits useradd.bbclass and re-creates the user nobody as a "system" user. This is not correct and is in vain because this new definition will not be created on the target. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-06-01postfix: Fix rootfs creation errorsDai Caiyun
1) error: file /usr/share/man/man1/mailq.1 from install of postfix-doc conflicts with file from package esmtp-doc 2) error: file /usr/share/man/man1/newaliases.1 from install of postfix-doc conflicts with file from package esmtp-doc 3) error: file /usr/share/man/man1/sendmail.1 from install of postfix-doc conflicts with file from package esmtp-doc Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-06-01opensaf: update to 5.0.0Armin Kuster
clean up to meet style guide Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-06-01squid: CVE-2016-4553Catalin Enache
client_side.cc in Squid before 3.5.18 and 4.x before 4.0.10 does not properly ignore the Host header when absolute-URI is provided, which allows remote attackers to conduct cache-poisoning attacks via an HTTP request. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-4553 Backported upstream patch: http://www.squid-cache.org/Versions/v3/3.5/changesets/squid-3.5-14039.patch Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-05-18proftpd: fix mod_tls build issueCatalin Enache
Backported upstream commit: https://github.com/proftpd/proftpd/commit/253e6ef6a4fde5545111f7c439a9692afecc597b Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-05-05squid: CVE-2016-3947Catalin Enache
Heap-based buffer overflow in the Icmp6::Recv function in icmp/Icmp6.cc in the pinger in Squid before 3.5.16 and 4.x before 4.0.8 allows remote servers to cause a denial of service (performance degradation or transition failures) or write sensitive information to log files via an ICMPv6 packet. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-3947 Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-05-05meta-networking: use bb.utils.contains() instead of base_contains()Ross Burton
base_contains() is a compatibility wrapper and may warn in the future, so replace all instances with bb.utils.contains(). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-05-05proftpd: CVE-2016-3125Catalin Enache
The mod_tls module in ProFTPD before 1.3.5b and 1.3.6 before 1.3.6rc2 does not properly handle the TLSDHParamFile directive, which might cause a weaker than intended Diffie-Hellman (DH) key to be used and consequently allow attackers to have unspecified impact via unknown vectors. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-3125 Signed-off-by: Catalin Enache <catalin.enache@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-04-20lldpd: Update to version 0.9.2Fabio Berton
This new release has following changes since version 0.9.0: lldpd (0.9.2) Change: - Ability to add/remove/replace custom TLV from lldpcli. - LLDP-MED capabilities are displayed differently in lldpcli. - Limit the maximum depth (5) when trying to apply a VLAN. - Change JSON output format when using json-c to match Jansson output. - Integration tests for the major parts of lldpd, including use of address and leak sanitizer. Fix: - LLDP-MED POE TLV are now displayed in lldpcli. - Ignore lower link when it is in another namespace. - Fix various problems with interfaces being enslaved. - Fix a memory leak when modifying port-related settings. lldpd (0.9.1) Change: - Rework packaging for OS X to make it work with El Capitan. To simplify a bit, it is not possible anymore to build fat binaries. Latest version of OS X supporting 32bit was 10.6. Fix: - By default, when using port alias as description, use port name as port ID. - Miscellaneous fixes with netlink cache. - Ensure large netlink messages can be received. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-04-19cyrus-sasl: Drop unneeded group additionRichard Purdie
The mail group is provided by base-passwd so would always be present. Therefore drop the uneeded group addition from this recipe. This works around the recent user cleanup code improvements which meant this started causing failures for people. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-03-02lldpd: fix PN -> BPN SRC_URI for multilib buildRandy MacLeod
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-02-29ncftp: fix build failures with ccdvJackie Huang
ccdv is an internal tool to reduce the deluge Make output to make finding actual problems easier and it is intended to be invoked from Makefiles only, it doesn't work for the cross compiling, so compile it with $BUILD_CC and corresponding CFLAGS. And I think we don't need to enable it by default to reduce our Make output, so add a PACKAGECONFIG for it but disable it by default. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-02-29postfix: fix clean broken issueHongxu Jia
There is a build failure while rebuilding postfix ... | NOTE: make -e MAKEFLAGS= OPT= DEBUG= OPTS= clean | make -f Makefile.in MAKELEVEL= Makefiles | (echo "# Do not edit -- this file documents how Postfix was built for your machine.";/bin/sh makedefs) >makedefs.tmp | No <db.h> include file found. | Install the appropriate db*-devel package first. | Makefile.in:31: recipe for target 'Makefiles' failed | make: *** [Makefiles] Error 1 | Makefile:21: recipe for target 'Makefiles' failed | make: *** [Makefiles] Error 2 | ERROR: oe_runmake failed | ERROR: Function failed: do_configure (log file is located at tmp/work/ core2-64-wrs-linux/postfix/3.0.2-r0/temp/do_configure/log.do_configure.12848) ... Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-02-29lldpd: use bash-completion.bbclassGeorge McCollister
Use bash-completion.bbclass to package bash completions. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-02-22dnrd: blacklistJoe MacDonald
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-02-22lldpd: Update to version 0.9.0Fabio Berton
The new release has following changes since version 0.7.19: - client: fix segfault when displaying some information - build: add some integration tests Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-02-22vsftpd: Explicitly set EXTRA_OEMAKE as requiredMike Crowe
This recipe currently relies on EXTRA_OEMAKE having been to set to "-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this explicit so that the default in bitbake.conf can be changed. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-17 17:24:49 +0000