From a6288549e612d4f88d7ed619087a03af2458443d Mon Sep 17 00:00:00 2001 From: Robert Joslyn Date: Sat, 18 Nov 2017 10:07:36 -0800 Subject: chrony: Update to version 3.2 Signed-of-by: Robert Joslyn Signed-off-by: Armin Kuster Signed-off-by: Joe MacDonald --- .../recipes-support/chrony/chrony/arm_eabi.patch | 36 +++--- .../recipes-support/chrony/chrony_2.4.bb | 134 --------------------- .../recipes-support/chrony/chrony_3.2.bb | 134 +++++++++++++++++++++ 3 files changed, 155 insertions(+), 149 deletions(-) delete mode 100644 meta-networking/recipes-support/chrony/chrony_2.4.bb create mode 100644 meta-networking/recipes-support/chrony/chrony_3.2.bb diff --git a/meta-networking/recipes-support/chrony/chrony/arm_eabi.patch b/meta-networking/recipes-support/chrony/chrony/arm_eabi.patch index d1586bba46..92a2dbd934 100644 --- a/meta-networking/recipes-support/chrony/chrony/arm_eabi.patch +++ b/meta-networking/recipes-support/chrony/chrony/arm_eabi.patch @@ -1,48 +1,54 @@ chrony: fix build failure for arma9 - + Eliminate references to syscalls not available for ARM_EABI. Also add a dependency on libseccomp which is needed for scfilter to work. - + Set PACKAGECONFIG to not enable scfilter, since kernel CONFIG_SECCOMP is unlikely to be set. This aligns the usage of libseccomp with that of other packages. Upstream-Status: Pending - + Signed-off-by: Joe Slater + Refresh patch for new upstream version. + + Signed-off-by: Robert Joslyn + --- a/sys_linux.c +++ b/sys_linux.c -@@ -453,13 +453,12 @@ SYS_Linux_EnableSystemCallFilter(int lev +@@ -465,14 +465,14 @@ SYS_Linux_EnableSystemCallFilter(int lev const int syscalls[] = { /* Clock */ - SCMP_SYS(adjtimex), SCMP_SYS(gettimeofday), SCMP_SYS(settimeofday), -- SCMP_SYS(time), + SCMP_SYS(adjtimex), SCMP_SYS(clock_gettime), SCMP_SYS(gettimeofday), +- SCMP_SYS(settimeofday), SCMP_SYS(time), ++ SCMP_SYS(settimeofday), /* Process */ -- SCMP_SYS(clone), SCMP_SYS(exit), SCMP_SYS(exit_group), SCMP_SYS(getrlimit), -+ SCMP_SYS(clone), SCMP_SYS(exit), SCMP_SYS(exit_group), - SCMP_SYS(rt_sigaction), SCMP_SYS(rt_sigreturn), SCMP_SYS(rt_sigprocmask), - SCMP_SYS(set_tid_address), SCMP_SYS(sigreturn), SCMP_SYS(wait4), + SCMP_SYS(clone), SCMP_SYS(exit), SCMP_SYS(exit_group), SCMP_SYS(getpid), +- SCMP_SYS(getrlimit), SCMP_SYS(rt_sigaction), SCMP_SYS(rt_sigreturn), ++ SCMP_SYS(rt_sigaction), SCMP_SYS(rt_sigreturn), + SCMP_SYS(rt_sigprocmask), SCMP_SYS(set_tid_address), SCMP_SYS(sigreturn), + SCMP_SYS(wait4), /* Memory */ - SCMP_SYS(brk), SCMP_SYS(madvise), SCMP_SYS(mmap), SCMP_SYS(mmap2), + SCMP_SYS(brk), SCMP_SYS(madvise), SCMP_SYS(mmap2), SCMP_SYS(mprotect), SCMP_SYS(mremap), SCMP_SYS(munmap), SCMP_SYS(shmdt), /* Filesystem */ SCMP_SYS(access), SCMP_SYS(chmod), SCMP_SYS(chown), SCMP_SYS(chown32), -@@ -470,14 +469,21 @@ SYS_Linux_EnableSystemCallFilter(int lev +@@ -483,14 +483,21 @@ SCMP_SYS(bind), SCMP_SYS(connect), SCMP_SYS(getsockname), - SCMP_SYS(recvfrom), SCMP_SYS(recvmsg), SCMP_SYS(sendmmsg), - SCMP_SYS(sendmsg), SCMP_SYS(sendto), + SCMP_SYS(recvfrom), SCMP_SYS(recvmmsg), SCMP_SYS(recvmsg), + SCMP_SYS(sendmmsg), SCMP_SYS(sendmsg), SCMP_SYS(sendto), - /* TODO: check socketcall arguments */ - SCMP_SYS(socketcall), /* General I/O */ - SCMP_SYS(_newselect), SCMP_SYS(close), SCMP_SYS(open), SCMP_SYS(pipe), + SCMP_SYS(_newselect), SCMP_SYS(close), SCMP_SYS(open), SCMP_SYS(openat), SCMP_SYS(pipe), - SCMP_SYS(poll), SCMP_SYS(read), SCMP_SYS(futex), SCMP_SYS(select), + SCMP_SYS(poll), SCMP_SYS(read), SCMP_SYS(futex), SCMP_SYS(set_robust_list), SCMP_SYS(write), /* Miscellaneous */ - SCMP_SYS(uname), + SCMP_SYS(getrandom), SCMP_SYS(sysinfo), SCMP_SYS(uname), + /* not always available */ +#if ! defined(__ARM_EABI__) + SCMP_SYS(time), diff --git a/meta-networking/recipes-support/chrony/chrony_2.4.bb b/meta-networking/recipes-support/chrony/chrony_2.4.bb deleted file mode 100644 index 71431f4b7b..0000000000 --- a/meta-networking/recipes-support/chrony/chrony_2.4.bb +++ /dev/null @@ -1,134 +0,0 @@ -SUMMARY = "Versatile implementation of the Network Time Protocol" -DESCRIPTION = "Chrony can synchronize the system clock with NTP \ -servers, reference clocks (e.g. GPS receiver), and manual input using \ -wristwatch and keyboard. It can also operate as an NTPv4 (RFC 5905) \ -server and peer to provide a time service to other computers in the \ -network. \ -\ -It is designed to perform well in a wide range of conditions, \ -including intermittent network connections, heavily congested \ -networks, changing temperatures (ordinary computer clocks are \ -sensitive to temperature), and systems that do not run continuously, or \ -run on a virtual machine. \ -\ -Typical accuracy between two machines on a LAN is in tens, or a few \ -hundreds, of microseconds; over the Internet, accuracy is typically \ -within a few milliseconds. With a good hardware reference clock \ -sub-microsecond accuracy is possible. \ -\ -Two programs are included in chrony: chronyd is a daemon that can be \ -started at boot time and chronyc is a command-line interface program \ -which can be used to monitor chronyd's performance and to change \ -various operating parameters whilst it is running. \ -\ -This recipe produces two binary packages: 'chrony' which contains chronyd, \ -the configuration file and the init script, and 'chronyc' which contains \ -the client program only." - -HOMEPAGE = "http://chrony.tuxfamily.org/" -SECTION = "net" -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" - -SRC_URI = "https://download.tuxfamily.org/chrony/chrony-${PV}.tar.gz \ - file://chrony.conf \ - file://chronyd \ - file://arm_eabi.patch \ -" -SRC_URI[md5sum] = "d0598aa8a9be8faccef9386f6fc0d5f2" -SRC_URI[sha256sum] = "8d04e7cda2333289c2104b731d39c3c1db94816e43bae35d7ee4e7ae8af6391f" - -DEPENDS = "pps-tools" - -# Note: Despite being built via './configure; make; make install', -# chrony does not use GNU Autotools. -inherit update-rc.d systemd - -# Configuration options: -# - For command line editing support in chronyc, you may specify either -# 'editline' or 'readline' but not both. editline is smaller, but -# many systems already have readline for other purposes so you might want -# to choose that instead. However, beware license incompatibility -# since chrony is GPLv2 and readline versions after 6.0 are GPLv3+. -# You can of course choose neither, but if you're that tight on space -# consider dropping chronyc entirely (you can use it remotely with -# appropriate chrony.conf options). -# - Security-related: -# - 'sechash' is omitted by default because it pulls in nss which is huge. -# - 'privdrop' allows chronyd to run as non-root; would need changes to -# chrony.conf and init script. -# - 'scfilter' enables support for system call filtering, but requires the -# kernel to have CONFIG_SECCOMP enabled. -PACKAGECONFIG ??= "editline \ - ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \ -" -PACKAGECONFIG[readline] = "--without-editline,--without-readline,readline" -PACKAGECONFIG[editline] = ",--without-editline,libedit" -PACKAGECONFIG[sechash] = "--without-tomcrypt,--disable-sechash,nss" -PACKAGECONFIG[privdrop] = ",--disable-privdrop,libcap" -PACKAGECONFIG[scfilter] = "--enable-scfilter,--without-seccomp,libseccomp" -PACKAGECONFIG[ipv6] = ",--disable-ipv6," -PACKAGECONFIG[nss] = "--with-nss,--without-nss,nss" -PACKAGECONFIG[libcap] = "--with-libcap,--without-libcap,libcap" - -# --disable-static isn't supported by chrony's configure script. -DISABLE_STATIC = "" - -do_configure() { - ./configure --sysconfdir=${sysconfdir} --bindir=${bindir} --sbindir=${sbindir} \ - --localstatedir=${localstatedir} --datarootdir=${datadir} \ - ${PACKAGECONFIG_CONFARGS} -} - -do_install() { - # Binaries - install -d ${D}${bindir} - install -m 0755 ${S}/chronyc ${D}${bindir} - install -d ${D}${sbindir} - install -m 0755 ${S}/chronyd ${D}${sbindir} - - # Config file - install -d ${D}${sysconfdir} - install -m 644 ${WORKDIR}/chrony.conf ${D}${sysconfdir} - - # System V init script - install -d ${D}${sysconfdir}/init.d - install -m 755 ${WORKDIR}/chronyd ${D}${sysconfdir}/init.d - - # systemd unit configuration file - install -d ${D}${systemd_unitdir}/system - install -m 0644 ${S}/examples/chronyd.service ${D}${systemd_unitdir}/system/ - - # Variable data (for drift and/or rtc file) - install -d ${D}${localstatedir}/lib/chrony - - # Log files - install -d ${D}${localstatedir}/log/chrony - - # Fix hard-coded paths in config files and init scripts - sed -i -e 's!/var/!${localstatedir}/!g' -e 's!/etc/!${sysconfdir}/!g' \ - -e 's!/usr/sbin/!${sbindir}/!g' -e 's!/usr/bin/!${bindir}/!g' \ - ${D}${sysconfdir}/chrony.conf \ - ${D}${sysconfdir}/init.d/chronyd \ - ${D}${systemd_unitdir}/system/chronyd.service - sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${sysconfdir}/init.d/chronyd - sed -i 's!^EnvironmentFile=.*!EnvironmentFile=-${sysconfdir}/default/chronyd!' ${D}${systemd_unitdir}/system/chronyd.service -} - -FILES_${PN} = "${sbindir}/chronyd ${sysconfdir} ${localstatedir}" -CONFFILES_${PN} = "${sysconfdir}/chrony.conf" -INITSCRIPT_NAME = "chronyd" -INITSCRIPT_PARAMS = "defaults" -SYSTEMD_PACKAGES = "${PN}" -SYSTEMD_SERVICE_${PN} = "chronyd.service" - -# It's probably a bad idea to run chrony and another time daemon on -# the same system. systemd includes the SNTP client 'timesyncd', which -# will be disabled by chronyd.service, however it will remain on the rootfs -# wasting 150 kB unless you put 'PACKAGECONFIG_remove_pn-systemd = "timesyncd"' -# in a conf file or bbappend somewhere. -RCONFLICTS_${PN} = "ntp ntimed" - -# Separate the client program into its own package -PACKAGES =+ "chronyc" -FILES_chronyc = "${bindir}/chronyc" diff --git a/meta-networking/recipes-support/chrony/chrony_3.2.bb b/meta-networking/recipes-support/chrony/chrony_3.2.bb new file mode 100644 index 0000000000..8b90a354ea --- /dev/null +++ b/meta-networking/recipes-support/chrony/chrony_3.2.bb @@ -0,0 +1,134 @@ +SUMMARY = "Versatile implementation of the Network Time Protocol" +DESCRIPTION = "Chrony can synchronize the system clock with NTP \ +servers, reference clocks (e.g. GPS receiver), and manual input using \ +wristwatch and keyboard. It can also operate as an NTPv4 (RFC 5905) \ +server and peer to provide a time service to other computers in the \ +network. \ +\ +It is designed to perform well in a wide range of conditions, \ +including intermittent network connections, heavily congested \ +networks, changing temperatures (ordinary computer clocks are \ +sensitive to temperature), and systems that do not run continuously, or \ +run on a virtual machine. \ +\ +Typical accuracy between two machines on a LAN is in tens, or a few \ +hundreds, of microseconds; over the Internet, accuracy is typically \ +within a few milliseconds. With a good hardware reference clock \ +sub-microsecond accuracy is possible. \ +\ +Two programs are included in chrony: chronyd is a daemon that can be \ +started at boot time and chronyc is a command-line interface program \ +which can be used to monitor chronyd's performance and to change \ +various operating parameters whilst it is running. \ +\ +This recipe produces two binary packages: 'chrony' which contains chronyd, \ +the configuration file and the init script, and 'chronyc' which contains \ +the client program only." + +HOMEPAGE = "https://chrony.tuxfamily.org/" +SECTION = "net" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" + +SRC_URI = "https://download.tuxfamily.org/chrony/chrony-${PV}.tar.gz \ + file://chrony.conf \ + file://chronyd \ + file://arm_eabi.patch \ +" +SRC_URI[md5sum] = "f4c4eb0dc92f35ee4bb7d3dcd8029ecb" +SRC_URI[sha256sum] = "329f6718dd8c3ece3eee78be1f4821cbbeb62608e7d23f25da293cfa433c4116" + +DEPENDS = "pps-tools" + +# Note: Despite being built via './configure; make; make install', +# chrony does not use GNU Autotools. +inherit update-rc.d systemd + +# Configuration options: +# - For command line editing support in chronyc, you may specify either +# 'editline' or 'readline' but not both. editline is smaller, but +# many systems already have readline for other purposes so you might want +# to choose that instead. However, beware license incompatibility +# since chrony is GPLv2 and readline versions after 6.0 are GPLv3+. +# You can of course choose neither, but if you're that tight on space +# consider dropping chronyc entirely (you can use it remotely with +# appropriate chrony.conf options). +# - Security-related: +# - 'sechash' is omitted by default because it pulls in nss which is huge. +# - 'privdrop' allows chronyd to run as non-root; would need changes to +# chrony.conf and init script. +# - 'scfilter' enables support for system call filtering, but requires the +# kernel to have CONFIG_SECCOMP enabled. +PACKAGECONFIG ??= "editline \ + ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \ +" +PACKAGECONFIG[readline] = "--without-editline,--without-readline,readline" +PACKAGECONFIG[editline] = ",--without-editline,libedit" +PACKAGECONFIG[sechash] = "--without-tomcrypt,--disable-sechash,nss" +PACKAGECONFIG[privdrop] = ",--disable-privdrop,libcap" +PACKAGECONFIG[scfilter] = "--enable-scfilter,--without-seccomp,libseccomp" +PACKAGECONFIG[ipv6] = ",--disable-ipv6," +PACKAGECONFIG[nss] = "--with-nss,--without-nss,nss" +PACKAGECONFIG[libcap] = "--with-libcap,--without-libcap,libcap" + +# --disable-static isn't supported by chrony's configure script. +DISABLE_STATIC = "" + +do_configure() { + ./configure --sysconfdir=${sysconfdir} --bindir=${bindir} --sbindir=${sbindir} \ + --localstatedir=${localstatedir} --datarootdir=${datadir} \ + ${PACKAGECONFIG_CONFARGS} +} + +do_install() { + # Binaries + install -d ${D}${bindir} + install -m 0755 ${S}/chronyc ${D}${bindir} + install -d ${D}${sbindir} + install -m 0755 ${S}/chronyd ${D}${sbindir} + + # Config file + install -d ${D}${sysconfdir} + install -m 644 ${WORKDIR}/chrony.conf ${D}${sysconfdir} + + # System V init script + install -d ${D}${sysconfdir}/init.d + install -m 755 ${WORKDIR}/chronyd ${D}${sysconfdir}/init.d + + # systemd unit configuration file + install -d ${D}${systemd_unitdir}/system + install -m 0644 ${S}/examples/chronyd.service ${D}${systemd_unitdir}/system/ + + # Variable data (for drift and/or rtc file) + install -d ${D}${localstatedir}/lib/chrony + + # Log files + install -d ${D}${localstatedir}/log/chrony + + # Fix hard-coded paths in config files and init scripts + sed -i -e 's!/var/!${localstatedir}/!g' -e 's!/etc/!${sysconfdir}/!g' \ + -e 's!/usr/sbin/!${sbindir}/!g' -e 's!/usr/bin/!${bindir}/!g' \ + ${D}${sysconfdir}/chrony.conf \ + ${D}${sysconfdir}/init.d/chronyd \ + ${D}${systemd_unitdir}/system/chronyd.service + sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${sysconfdir}/init.d/chronyd + sed -i 's!^EnvironmentFile=.*!EnvironmentFile=-${sysconfdir}/default/chronyd!' ${D}${systemd_unitdir}/system/chronyd.service +} + +FILES_${PN} = "${sbindir}/chronyd ${sysconfdir} ${localstatedir}" +CONFFILES_${PN} = "${sysconfdir}/chrony.conf" +INITSCRIPT_NAME = "chronyd" +INITSCRIPT_PARAMS = "defaults" +SYSTEMD_PACKAGES = "${PN}" +SYSTEMD_SERVICE_${PN} = "chronyd.service" + +# It's probably a bad idea to run chrony and another time daemon on +# the same system. systemd includes the SNTP client 'timesyncd', which +# will be disabled by chronyd.service, however it will remain on the rootfs +# wasting 150 kB unless you put 'PACKAGECONFIG_remove_pn-systemd = "timesyncd"' +# in a conf file or bbappend somewhere. +RCONFLICTS_${PN} = "ntp ntimed" + +# Separate the client program into its own package +PACKAGES =+ "chronyc" +FILES_chronyc = "${bindir}/chronyc" -- cgit 1.2.3-korg