aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-07-25layer.conf: bump version for uclibc removal and LSB updateRoss Burton
As of oe-core layer version 9, uclibc has been removed and LSB approximates version 5 (which means that Qt 3 isn't required for LSB conformance). Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25uclibc: removeRoss Burton
uclibc is showing its age now and upstarts like musl are approximately the same size but with far more features and active maintainers. Remove uclibc from oe-core and use endorse musl as the lighter alternative to full-fat glibc. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25LSB: 4.1.0 -> 5.0Dengke Du
According to the LSB 5.0 Release Notes, FHS Released, Qt3 removed and evoloved its module strategy which you can access from the site: https://wiki.linuxfoundation.org/en/ReleaseNotes50 So we make two changes to comply with the LSB 5.0: 1. Remove the lsb-test-qt3-azov-*.rpm test package and delete the test session. 2. Update the test packages. Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25systemd_boot: Enable module to test systemd bootloaderJose Perez Carranza
Module systemd_boot created wtih a class "Systemdboot" and a test case "test_efi_systemdboot_images_can_be_built" to test new systemd bootloader. [YOCTO #9706] Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25webkitgtk: Switch the ARMv7 build to Thumb2 and enable back the JSC JIT.Carlos Alberto Lopez Perez
* The JSC JIT is broken on ARMv7 without Thumb2. [YOCTO #9474] Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25quota: make compile pass when disable rpcKai Kang
When 'rpc' is not in PACKAGECONFIG, option '--disable-rpc' is passed to configure and then compile fails. Backport patches to make quota build successfully. Update fcntl.patch that part of the patches are added by 0002-Allow-building-on-systems-that-do-not-have-rpc-heade.patch. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25weston-init: De-couple framebuffer console from Weston for systemd startupTom Hochstein
The framebuffer console was using the same I/O as Weston. We fix this by having openvt switch to the new VT when starting weston-launch, same as is already done for the sysvinit case. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25weston-init: Fix weston-start to handle 0 or 1 argsTom Hochstein
The parser incorrectly treated anything less than 2 args as an error. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25weston-init: Fix weston-start to allow weston args without openvt argsTom Hochstein
The parser didn't properly handle commands of the form weston-start -- <weston-options>. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25ccache: 3.2.4 -> 3.2.5Robert Yang
Add Revert-Create-man-page-in-the-make-install-from-git-.patch to disable asciidoc since we don't have it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25gettext-minimal-native: 0.19.4 -> 0.19.8.1Robert Yang
How to upgrade gettext-minimal-native: - Build gettext-native - Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and gettext-runtime/po/remove-potcdate.sin from gettext-native. - Update COPYING when needed (usually update the year), do not copy the whole COPYING file from gettext-native. - Go to gettext-native's ${S}/gettext-runtime/m4: > Remove lt*.m4 and libtool.m4 > copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/gnulib-m4/ > tar czvf /path/to/aclocal.tgz *.m4 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25gettext: 0.19.6 -> 0.19.8.1Robert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25slang: 2.2.4 -> 2.3.0Robert Yang
* Removed: change-char-type-to-signed-char-in-macros.patch sprintf-bug-concerning-8-bit-characters.patch They are already in the source. * Updated: fix-check-pcre.patch fix-check-pcre.patch slang-fix-the-iconv-existence-checking.patch * Use SECURITY_NO_PIE_CFLAGS for SECURITY_CFLAGS, it can't be built with "-pie -fpie": tmp/sysroots/qemux86-64/usr/lib64/../lib64/Scrt1.o: In function `_start': /usr/src/debug/glibc/2.24-r0/git/csu/../sysdeps/x86_64/start.S:104: undefined reference to `main' /tmp/ccMFTA8A.o: In function `smg_char_at': /usr/src/debug/slang/2.3.0-r0/slang-2.3.0/modules/slsmg-module.c:134: undefined reference to `SLsmg_char_at' /tmp/ccMFTA8A.o: In function `smg_resume_smg': Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25gnu-efi: 3.0.3 -> 3.0.4Robert Yang
* Remove gnu-efi-Make-setjmp.S-portable-to-ARM.patch since it is already in the source. * Updated LIC_FILES_CHKSUM - The following files are gone: lib/arm/div64.S lib/arm/lib1funcs.S - Updated md5sum for other files, they add the following words, which are still GPLv2+: Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice and this list of conditions, without modification. 2. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. Alternatively, this software may be distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. * Remove -mfpmath=sse from TUNE_CCARGS since gnu-efi doesn't support sse to fix the problem: rtdata.c:1:0: error: SSE instruction set disabled, using 387 arithmetics [-Werror] * gnu-efi's Makefile treats prefix as toolchain prefix, so don't export it, otherwise there would be errors: /bin/sh: /usrgcc: No such file or directory * Add aarch64-initplat.c-fix-const-qualifier.patch to fix build on aarch64: initplat.c:44:35: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25guile: 2.0.11 -> 2.0.12Robert Yang
* Remove these patches which already in the source: - libguile-VM-ASM_MUL-for-ARM-Add-earlyclobber.patch - remove_strcase_l_funcs.patch - 0001-libguile-Check-for-strtol_l-during-configure.patch * Update 0002-Recognize-nios2-as-compilation-target.patch Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25git: 2.8.4 -> 2.9.2Robert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25linux-yocto-dev: Ensure we don't reparse the recipe when its not being used ↵Richard Purdie
(take 2) The use of the ${AUTOREV} variable means bitbake would always re-parse the recipe. This isn't desirable when its disabled so undo the always parsing flag in this case. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25Revert "linux-yocto-dev: Handle performance regression"Richard Purdie
This recipe no longer functions after this change, revert it. This reverts commit 3e0137113e894eb8b23cd43721c7ba26ff234c8f. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25lib/oeqa/decorators: handle broken links when creating new symlinkRoss Burton
When checking if a link exists before creating it, use os.path.lexists() as otherwise os.path.exists() on a broken link will return False. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25siteinfo: Add mechanism to extend siteinfo information from BSP layerRichard Purdie
In order to add a new architecture or sub-architecture to OE, you currently need to tweak the table in siteinfo.bbclass. This adds a mechanism so this can be done from a BSP layer. It needs a function definition which needs a class file but can then be done with something like: def rp_testfunc2(archinfo, osinfo, targetinfo, d): archinfo['testarch'] = "little-endian bit-32" osinfo['testos'] = "common-linux" targetinfo['mymach-linux'] = "mymach-linux-common" return archinfo, osinfo, targetinfo SITEINFO_EXTRA_DATAFUNCS = "rp_testfunc2" [YOCTO #8554] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25insane: Add mechanism to extend QA machine information from BSP layerRichard Purdie
In order to add a new architecture or sub-architecture to OE, you currently need to tweak the table in insane.bbclass. This adds a mechanism so this can be done from a BSP layer. It needs a function definition which needs a class file but can then be done with something like: def my_testfunc(machdata, d): machdata["testmachine"] = { "test64": ( 8, 0, 0, False, 32), "testel": ( 8, 0, 0, True, 32), } return machdata PACKAGEQA_EXTRA_MACHDEFFUNCS = "my_testfunc" [YOCTO #8554] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21boost: fix CVE-2012-2677Kai Kang
Backport patch to fix CVE-2012-2677 for boost from: https://svn.boost.org/trac/boost/changeset/78326 Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21package_manager.py: Avoid installing an empty package listMark Hatle
It is possible in an attempt only install, that everything listed is not available to be installed. This will have the effect of clearing the package list. However, we only check for an empty package list at the beginning of the function. We need to also check before running the install, otherwise we can fail due to 'error: no package(s) given". Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21glibc: Update to 2.24 after hard-freezeKhem Raj
Drop upstreamed patch Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21wic: rawcopy: make source filenames uniqueEd Bartosh
Rawcopy plugin copies source files to build folder before using them to assemble result image. After assembling the image wic renames source files to <image>.p<partition number>. If the same source file is used in multiple partitions wic breaks trying to rename file that doesn't exist. Added <line number> suffix to the files when copying them to the build dir. This should make filename unique even if the same source file is used for multiple partitions. [YOCTO #9826] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21buildhistory-diff: reduce PKGR noiseEd Bartosh
When using PR service the buildhistory-diff output contains a lot of PKGR changes: In practice the mass of PKGR updates hide other important changes as they often account for 80% of all changes. Skipped incremental and decremental changes of PKGR versions to reduce amount of the script output. All changes are still included in the output if script is run with -a/--report-all command line option. [YOCTO #9755] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21systemd: allow add users to groups in rootfs postprocessStephano Cetola
Currently the functionality checks for the "u" and "g" flags to create users and groups, but not the "m" flag to add users to groups. This change first checks to be sure that the users and groups are created, creates them if necessary, then adds the user to the group. Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-21initrdscripts/init-install*: Select install target instead of looping throughCalifornia Sullivan
Its not immediately apparent that more than one install target could be available. With this change we list the available devices up front then prompt the user for which one to use, reducing confusion. Fixes [YOCTO #9919]. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-20oeqa/controllers: Add test target for Systemd-bootJose Perez Carranza
A new test target is neede to test Systemd-boot similar to gummiboot. Created a copy of GummibootTarget class and named as SystemdbootTarget, at this point the gummibootTarget will remain until documentation is updated with new systed information. Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20oetest.py: Fix problem when there is more than one json file for package ↵Mariano Lopez
extraction This allow to have more than one test to have json file in order to install packages in the DUT without using a package manager. [YOCTO #9926] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20oe-selftest: print errors when failed to find testRobert Yang
For example: $ oe-selftest --run-tests-by name hello world 2016-07-12 00:33:28,678 - selftest - ERROR - Failed to find test: hello 2016-07-12 00:33:28,679 - selftest - ERROR - Failed to find test: world Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20lib/oeqa/utils/commands.py: Move updateEnv() from runexported.pyMariano Lopez
updateEnv() can be used in other places so move the function to utils/commands.py Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20intltool: remove broken XML::Parser detectionRoss Burton
intltool.m4 has a chunk of code that runs during configure which probes for a perl binary and verifies that it has the XML::Parser module. However in builds using intltool-native the perl binary that it finds is likely to not be the one that the intltool scripts will be using as the scripts hardcode nativeperl yet the m4 fragment searches for "perl" in $PATH. If the host perl doesn't have XML::Parser the configure will fail, despite the fact that the scripts will work. Solve this by taking an old patch from the upstream bug system to simply remove the check in intltool.m4 as it's generally useless, and remove existing patches that almost but not quite solved this issue. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20intltool: merge .bb and .incRoss Burton
There's no use in having these split, so merge them together for clarity. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20oeqa/recipetool: update recipe test to pass SHARoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20oeqa/devtool: update recipe test as libmatchbox changedRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20xf86-input-libinput: Upgrade 0.16.0 -> 0.19.0Jussi Kukkonen
Note that the xorg configuration file for input-libinput now sorts lower than it used to (90 -> 60). Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20xf86-input-evdev: Upgrade 2.10.2 -> 2.10.3Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20xkeyboard-config: Upgrade 2.17 -> 2.18Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20libxfixes: Upgrade 5.0.1 -> 5.0.2Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20weston: Upgrade 1.10.0 -> 1.11.0Jussi Kukkonen
Remove now unnecessary patch, rebase others. Add musl build fix patch. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20wayland: Upgrade 1.10.0 -> 1.11.0Jussi Kukkonen
Add a musl build fix patch. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20wayland-protocols: Upgrade 1.3 -> 1.4Jussi Kukkonen
Remove backported patch. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20mesa: Upgrade 11.2.2 -> 12.0.1Jussi Kukkonen
Massive mesa upgrade (OpenGL 4.3, GLVND support, vulkan driver for intel etc), although many new things are disabled by default. License file change does not change the actual licenses. piglit results (with piglit update on ML) on an old NUC with Intel HD5000 for reference: pass: 33972 fail: 306 crash: 2 skip: 30857 warn: 7 total: 65144 Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20mesa-demos: Require X11 distro featureJussi Kukkonen
Mesa-demos theoretically does not require X11 (apart from xdemos/) but reality is that every other binary requires glut. So: * 'non-glut' part of mesa-demos requires X11 * current freeglut recipe also depends on X11 There is apparently wayland support in freeglut now: This recipe should be modified when meta-oe freeglut recipe has that feature. The change became necessary now because mesa no longer mistakenly installs GL files when X11 is disabled (and mesa-demos configure currently requires GL). Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2016-07-20image: add do_image_qa task to run QA checks on the constructed imageJoshua Lock
This task runs all functions in IMAGE_QA_COMMANDS after the image construction has completed in order to validate the resulting image. Image sanity checks should either be Python functions which raise bb.build.FuncFailed on failure or shell functions with return a non-zero exit code. Python functions may instead raise an oe.utils.ImageQAFailed Exception which takes an extra argument, a description of the failure. python image_check_python_ok () { if True: raise bb.build.FuncFailed('This check always fails') else: bb.note("Nothing to see here") } image_check_shell_ok () { if true exit 1 else exit 0 fi } [YOCTO #9448] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20python3: Security fix CVE-2016-5636Armin Kuster
Affects python3 < 3.5.1 Base Score (4.4) Medium Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20python2: Security fix CVE-2016-5636Armin Kuster
Affects python2 < 2.7.11 Base score (4.4) Medium Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20bzip2: Security fix CVE-2016-3189Armin Kuster
Affects bzip2 <= 1.0.6 CVSS v2 Base Score: 4.3 MEDIUM Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20openssl: Security fix CVE-2016-2178Armin Kuster
affects openssl <= 1.0.2h CVSS v2 Base Score: 2.1 LOW Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-30 19:50:50 +0000