aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-03-02systemd: avoid parsing error when 'networkd' is enabled in PACKAGECONFIGChenQi/systemd-networkdChen Qi
If 'networkd' is enabled in PACKAGECONFIG, the do_install variable cannot be correctly expanded. Error message is like below. Failure expanding variable do_install: ShellSyntaxError: LexToken(Fi,'fi',0,0) followed by: LexToken(NEWLINE,'\n',0,0) This patch fixes the above problem. Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
2015-02-27build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27gst-player: only depend on -ugly plugins if commercial licenses enabledRoss Burton
gstreamer1.0-plugins-ugly is protected by the "commercial" LICENSE_FLAGS, so only recommend it if those licenses are enabled. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: add PACKAGECONFIG for xkbcommon and iptablesRoss Burton
systemd has optional support for xkbcommon (verify keymaps when locale changes) and iptables (configure NAT rules). Add PACKAGECONFIG options for these, disabling iptables by default and respecting the X11 DISTRO_FEATURE for libxkbcommon (as the code involves X11 keymaps). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: use PACKAGECONFIG for PAM enable/disableRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: add missing util-linux build-dependencyRoss Burton
This dependency accidently disappeared in the 219 upgrade, so add it back. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27owl-video: removeRoss Burton
The testapps packagegroup was the only user of owl-video, and now that has been replaced by gst-player this can be deleted. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27packagegroups: use gst-player instead of owl-videoRoss Burton
owl-video is a bad video player that doesn't work very well, use gst-player instead for testing. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27sato: fix typo in packagegroupRoss Burton
The gtk-play binary is packaged in gst-player-bin... Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27python: Fix ctypes/libffi configureAlejandro Hernandez
Forces the creation of a configure script for ctypes/libffi Module by calling autoreconf after it being deleted on do_configure(). Fixes configuration hence compilation of this Python module. [YOCTO #7373] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27package_rpm.bbclass: support packaging of symlinks to directoriesPatrick Ohly
os.walk() returns symlinks to directories in the "dirs" lists, but then never enters them by default. As a result, the old code applied neither the directory handling (because that is active once a directory gets entered) nor the file handling, and thus never packaged such symlinks. The fix is simple: find such special directory entries and move them to the "files" list. However, one has to be careful about the undefined behavior of modifying a list while iterating over it. This fix was required for packaging a modified base-files that created symlinks into /usr for /sbin /lib and /sbin. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27libpcap: add pkg-config supportJoe MacDonald
libpcap was not previously installing a pkg-config file. Add a basic one that will allow using 'pkg-config --libs libpcap', for example, in recipes rather than 'pcap-config', which frequently returns incorrect information. Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: Upgrade 218 -> 219Khem Raj
219 has been in the docks for sometime, the older patch got merged this patch is now upgrading 218 to 219 Make all patches using git Change-Id: Ib0350144592aba26cad56c13c9a5522515915c58 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27libgpg-error: Upgrade 1.17 -> 1.18Khem Raj
License checksums changed due to year change - Copyright (C) 2003, 2004, 2010, 2013, 2014 g10 Code GmbH + Copyright (C) 2003, 2004, 2010, 2013, 2014, 2015 g10 Code GmbH Change-Id: I870446796cf9ffe3acae7aeeac2d96d6305d4186 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-26gaku: remove (replaced by gst-player)Ross Burton
Gaku was buggy and use GStreamer 0.10, gst-player is less buggy and uses GStreamer 1.x. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-26sato: use gtk-play (from gst-player) instead of GakuRoss Burton
The Gaku media player was always a bit incomplete and had some serious bugs. gst-player doesn't have these bugs, is maintained, and uses GStreamer 1.x. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-26gst-player: addRoss Burton
gst-player is a convenience library for handling media playback in GStreamer. It also has a sample application that can be used as a basic media player for testing. Patch in a file selector for use without a terminal and a desktop file so it appears in the desktop. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-26lib/oe/terminal: fix konsole terminal support for KDE 4.xPaul Eggleton
It seems that the --nofork option genuinely stops konsole from going into the background now; I'm not sure when this changed but it does seem to be working so we can use it. (Tested with Konsole 2.10 and 2.14.2). Fixes [YOCTO #4934]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-26lib/oe/terminal: fix regressionsPaul Eggleton
Fix up some issues introduced by OE-Core commit 818c94f5b9882c2028ef9f056714a0a3c9045551: * If we want to support versions with more than two parts, versions with only one part, or versions with non-integer parts, then we have to stay with strings. We can use distutils.version.LooseVersion() to help with comparisons. * We don't want a warning when launching gnome-terminal 3.10+ and logger.warn() doesn't take a first integer parameter anyway (logger.debug() does). * Also clean up tabs. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24terminal.py: No --disable-factory for gnome-terminal >= 3.10Sven Ebenfeld
--disable-factory has been disabled in earlier versions of gnome-terminal but from version 3.10 it raises an error and quits. This makes devshell unusable with gnome-terminal >= 3.10. This patch checks for the version and removes --disable-factory if you have the terminal version 3.10 or higher. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24systemd: Upgrade 216 -> 218Khem Raj
Remove upstreamed patches as well as patches which arent needed anymore since features are dropped from systemd e.g. userspace firmware download Tested on qemux86 Change-Id: Ic53aaad198998de146c3a7702ef17de871de9de6 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24util-linux: disable systemdRoss Burton
systemd has a build-dependency on util-linux for libmount, and util-linux has an optional build dependency on systemd. The features in util-linux that enabling systemd gives you are: * lslogins can show recent journal entries from the user * uuidd can use socket activation and has a service file * fstrim has a service file * logger can write journal entries These are not worth the overhead of maintaining two util-linux recipes to bootstrap the cycle, so disable systemd support in util-linux. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24python-native: Fixes PGEN linking errors Changes Makefile rules to avoid ↵Alejandro Hernandez
parallel make races when trying to build Parser/PGEN Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24glibc: Help compile with -OsKhem Raj
When we modify to use -Os -Werror doesnt go well with it, glibc needs to be cleaned up for that but until then lets disable -Werror when using -Os Also updates the options group patch to work better with -Os. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23gst-plugins-package.inc: Avoid dependency on ${PN} from ${PN}-<plugin>Peter Kjellerstedt
A recent change to this file added a runtime dependency from ${PN} on ${PN}-meta since users tend to believe that installing the main package will bring in all of the individual plugin packages, which previously was not the case. However, since all plugin packages had a dependency on the main package, this caused all plugin packages to be pulled in whenever one plugin package was installed... Since the main package is now guaranteed to be empty, there is no reason for the plugin packages to depend on it any more. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23recipes: Delete superfluous assignments, S = ${WORKDIR}/${BP}Robert P. J. Day
Given that bitbake.conf sets the default values: BP = "${BPN}-${PV}" S = "${WORKDIR}/${BP}" there are a number of recipes that set the variable S completely superfluously, so get rid of them. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23busybox:udhcpc: Remove the routes from the right interfaceHolger Hans Peter Freyther
When using iproute2 to remove the route all default rules will be removed. Scope the removal by interface like it is done with ifconfig. Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23busybox:udhcpc: Start with a metric of 10 for routesHolger Hans Peter Freyther
Linux allows to install multiple default routes with different metrics. Start with a metric above 0 to allow other parts of the system to install routes with a lower metric. Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23base-files: clean up and clarify hostname logicRoss Burton
Change the hostname logic the default value is ${MACHINE}, and explain how to change it. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23populate_sdk_ext: add extensible SDKRandy Witt
This bbclass will create an SDK with a copy of bitbake and the metadata and sstate for the target specified for the task. The idea is to let "system" developers both work on applications and then test adding them to an image without having to switch between workspaces or having to download separate items. Rather than running bitbake directly however, the primary way of running builds within the extensible SDK is to use the "devtool" command. The rest of the build system is fixed via locked shared state signatures, and thus only the recipes you have added get built. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23scripts/oe-buildenv-internal: add means of skipping SDK check during setupRandy Witt
The oe-buildenv-internal script checks if the user is already in an sdk environment and errors if true. Add a way to skip this check. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23uninative-tarball: Actually use bzip2 for compression.Randy Witt
uninative.bbclass uses -xjf for decompression so actually run the data through bzip2. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23toolchain-shar-template.sh: Make relocation optional.Randy Witt
If the buildsystem is copied into the sdk and its toolchain is to be used, then the relocation provided in toolchain-shar-template.sh isn't needed and will actually fail. So break the relocation aspect out and essentially make it another SDK_POST_INSTALL_COMMAND script. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23toolchain-scripts: Add parameters to toolchain_create_sdk_env_script.Randy Witt
To add some flexibility to setting up the paths for the toolchain, add some parameters. This initial use will be in order to point at the buildsystem toolchain copied in by copy_buildsystem.py. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23copy_buildsystem.py: Add methods to copy shared state.Randy Witt
Added the helper functions necessary to copy the sstate from the current build, and generate the file to "lock" it. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23copy_buildsystem.py: Add a way to copy buildsystem to a directory.Randy Witt
This file provides a way to take bitbake and the layers in the current build and copy them to a target specified. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23sstatesig: Add ability to filter list of tasks for locked-sigs.incPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23gen-lockedsig-cache: Allow cross-filesystem copies.Randy Witt
Since this previously always tried to use hardlinks you couldn't have the source and destination be on different devices. This change allows for that and also prevents failure in situations where the files already existed. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23classes/sanity: avoid bblayers version issue when switching between poky and ↵Paul Eggleton
other DISTRO values If you create a build directory with poky, or set DISTRO to "poky" and run bitbake, you'll get a bblayers.conf file with LCONF_VERSION set to 6. If you then set DISTRO to any other value where the new distro config doesn't pull in poky's config, e.g. "nodistro", you would then get a bblayers.conf version error which didn't immediately make sense. (The layer versions have been out-of-step ever since meta-yocto-bsp was split out of meta-yocto several years ago). This is just painful and we'd rather users didn't have to deal with it. Obviously it isn't an OE-Core problem per se, but a simple way to resolve it for everyone is to bump OE-Core's version to 6 with an automatic no-op upgrade. Also ensure that multiple upgrade functions (such as the poky one) have a chance to execute by not breaking out of the loop as we were before. Fixes [YOCTO #6139]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23Revert "bind: fix and enable parallel build"Richard Purdie
This reverts commit b003df03358aea4e9e094ee339a9f6796866961e. We keep seeing parallel make failures on the autobuilder Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23Revert "logrotate: 3.8.8 -> 3.8.9"Richard Purdie
This reverts commit 0a69248db774f169318fc5954c805f0a7e8803dc. The update causes QA failures on the autobuilder.
2015-02-23Revert "openssl: fix and enable parallel build"Richard Purdie
This reverts commit 7502fa5febdd7a2281d626f7040782fb1f9af59e. We keep seeing parallel make failures in openssl :( Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23python-native: Reverts usage of distutils.sysconfigAlejandro Hernandez
On older versions of Python, sysconfig read the Makefile and Python.h, generated at build time now it uses _sysconfigdata which contains information about the HOST, erroneous in our case, this causes an error when bulding something using distutils since it obtains compiler information and such. Also fixes configuration of _ctypes/libffi Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
2015-02-23Python: Upgrade from 2.7.3 to 2.7.9:Alejandro Hernandez
- Based on Paul Eggletons work to partially upgrade to Python 2.7.6 Modified: default-versions.inc: switched to python 2.7.9 generate-manifest-2.7.py: fixed _sysconfigdata python-2.7-manifest.inc: fixed _sysconfigdata python.inc: Updated checksums and source, no LICENSE change just updated some dates python-native_2.7.3 -> python-native_2.7.9 and updated patches python_2.7.3 -> python_2.7.9, and added ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no in EXTRA_OECONF to solve python issue #3754, only needed when cross compiling, also updated patches use_sysroot_ncurses_instead_of_host.patch: New patch to use ncursesw from sysroot instead of hosts, introduced by fix for python issue #15268 Rebased: 01-use-proper-tools-for-cross-build.patch 03-fix-tkinter-detection.patch 05-enable-ctypes-cross-build.patch 06-avoid_usr_lib_termcap_path_in_linking.patch avoid_warning_about_tkinter.patch builddir.patch fix_for_using_different_libdir.patch host_include_contamination.patch multilib.patch nohostlibs.patch search_db_h_in_inc_dirs_and_avoid_warning.patch Deleted (fixed on upstream): 06-ctypes-libffi-fix-configure.patch CVE-2013-4073_py27.patch gcc-4.8-fix-configure-Wformat.patch json-flaw-fix.patch posix_close.patch pypirc-secure.patch python-2.7.3-CVE-2012-2135.patch python-2.7.3-CVE-2013-1752-smtplib-fix.patch python-2.7.3-CVE-2014-1912.patch python-2.7.3-CVE-2014-7185.patch python-2.7.3-berkeley-db-5.3.patch python-fix-build-error-with-Readline-6.3.patch remove-BOM-insection-code.patch remove_sqlite_rpath.patch python2.7.3-nossl3.patch [YOCTO #7059] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
2015-02-23devtool: fix broken clones of git recipesPaul Eggleton
Because we move the workdir when extracting source, then move the source and delete the temporary workdir, you lose the indirection symlink pointed to by the alternates file (which is created when the fetcher clones it from DL_DIR with -s) and the resulting repository is broken. In any case, for a source repo that the user may put their own changes into, we can't really rely on a clone made with -s in case the original goes away - because of cleanall, DL_DIR disappearing, etc. So repack the repository so that it is a complete, non-shared clone after unpacking. (While I'm at it, add a test for devtool modify with a git recipe which verifies that this works.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23devtool: support source extraction for recipes that use a shared workdirPaul Eggleton
Enable source extraction used by devtool extract / devtool modify -x for recipes that use a shared workdir (e.g. the kernel and gcc). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-23devtool: modify: handle recipes that use a shared workdirPaul Eggleton
If S is outside of WORKDIR then we shouldn't try to get the relative path in order to work out where the source subdirectory is as we do by default. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-23 08:10:52 +0000