| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These binaries are installed to $libexecdir/nfc not $libdir/$BPN.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Refreshed the following patches to work with this release:
1) 0001-iw-version.sh-don-t-use-git-describe-for-versioning.patch
2) separate-objdir.patch
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ssh-agent regression test case should be run by non-root user,
but non-root user will has issue to run other testcase, so
rewrite it on run-ptest
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
openssl 1.0.2d fixes the parallel make problems (commit 8e6bb99), so enable
parallel make again.
[ YOCTO #7347 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed the patch 0001-backtrace-Disable-for-non-glibc-C-libraries.patch,
as it is included in the new sources.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bridge is a tool used frequently, so install it
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
wpa-supplicant: upgrade to 2.5
1. upgrade to 2.5
2. remove eight patches since they have been applied in 2.5
3. update SRC_URI, HOMEPAGE and BUGTRACKER to use w1.fi instead
Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Update libpcap from version 1.6.2 to 1.7.4
LICENSE checksum has changed because of the removal of additional
spaces in the file.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
4.1.1 -> 4.3.0
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When the client is enabled, which we do by default, readline is required.
Currently it gets pulled in by other dependencies of connman, indirectly,
but we should be explicit rather than relying on this.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is from Shrikant Bobade <Shrikant_Bobade@mentor.com>.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove wireless-tools.if-pre-up and zzz-wireless.if-pre-up.
As per the comment, these files were not in use from 20/8/08.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* follow symbolic links while copying sources from test/*
* install required target files to remove Make errors:
make[2]: *** No rule to make target 'xxx', needed by 'yyy'.
* fix hardcode pathes:
/usr/lib -> ${libdir}, /usr/bin -> ${bindir}
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For clarity and correctness of source archiving, don't move find.pl from WORKDIR
to S in do_configure_prepend but tell the fetcher to put it in the right place
when unpacking.
Also re-order the files in SRC_URI so that patches are grouped together.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The crypto_use_bigint_in_x86-64_perl patch uses the "bigint" module to
transparently support 64-bit integers on 32-bit hosts. Whilst bigint (part of
bignum) is a core Perl module not all distributions install it (notable Fedora
23).
As the error message when bignum isn't installed is obscure, add a task to check
that it is available and alert the user if it isn't.
[ YOCTO #8562 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We need these to be consistent so they are possible to programmatically
read.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Match target name linux-mips64 as well, all mips64 targets will have
mips(32) userspace.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When distro feature x11 is set, it is better enable X11Forwarding for
ssh daemon. For contrast, dropbear enable X11 forward by default.
It does NOT need to modify ${WORKDIR}/sshd_config, so drop the modification.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the segfault by separating the socket used in statd from the sockets
of RPC core.
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
wired-setup script should not be in ${libdir} as it's not arch
dependent.
This also fixes (or works around) a practical issue where a multilib
build installs the wrong version of connman-conf and then connman
can't find the script.
[YOCTO #8550]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The file permission should be 0644 instead of 0755.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Update bugtracker web address
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Move connmans xuser-related D-Bus policy to a separate file that
xuser-account installs: This way connman does not need to depend on
xuser-account. Add policies for bluez and ofono in the same file.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Bluez D-Bus policy is much too open and affects not just bluez but
all system services: Use upstream policy configuration instead.
This change has a chance of affecting other D-Bus services: the bug
that is fixed here may have hidden problems in other policies.
[YOCTO #8414]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #8365]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gettext 0.16.1 doesn't install any m4 files to sysroot, please see
the following commit:
commit 9e10db5bdfe77c0ef2aff2f1cf89958b62c294a1
Author: Christopher Larson <kergoth@gmail.com>
Date: Mon Mar 17 18:10:54 2014 +0000
gettext-0.16.1: kill target m4 macros from sysroot
This is aim for using gettext-native's macros(gettext-native-0.19.4),
but when we set:
PREFERRED_VERSION_gettext = "0.16.1"
And build the recipes like pcmanfm, we would get errors when
do_configure:
configure:5164: error: possibly undefined macro: AM_NLS
This is because autotools_copy_aclocals doesn't copy the native macros
for target unless they're direct dependencies.
Add gettext-native to DEPENDS will fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove dependencies for test targets. Otherwise, during ptest
execution, "make" tries to rebuild those executables and fails
there.
[YOCTO #8059]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you currently do a DISTRO_FEATURES_remove = "x11" with OE-Core, you
see failures due to dependency problems. The work in resolving this was
partially completed a while back. This adds in the markup mainly for
gtk/gtk3+ recipes and means "bitbake world" will work successfully.
Rather than code the gtk/gtk+ specific distro features into each recipe,
a shared variable is used.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, the iproute2's configure script is actually run in the
do_compile stage. There's a Makefile rule 'all: Config' which makes
the configure process run to generate the Config file.
However, this makes it hard to fix the dependency problems. We need
to generate the Config file in the do_configure stage.
Add do_configure_append to separate the configure process from the
compile process.
Besides, explicitly disable ATM support for iproute2, otherwise we'll
sometimes meet errors like below when building.
ld: cannot find -latm
collect2: error: ld returned 1 exit status
Makefile:154: recipe for target 'q_atm.so' failed
make[1]: *** [q_atm.so] Error 1
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There are already "allow" rules for root and conditionally xuser to
send messages to connman: there should be no reason for a default
allow policy.
Also, conditionally add a policy to allow xuser to send to the
connman vpn service (similar to main service).
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This means dragging in xuser-account even when it's not used but
that's a lesser evil than the recipe depending on machine specific
settings.
This also prevents a warning on connman service startup when
ROOTLESS_X is not set:
Unknown username "xuser" in message bus
[YOCTO #8005]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Map nios2 architecture to linux-generic32 target.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gen.c uses 512 as the path length which is a little short when build in
deep dir, and cause "too long" error, use PATH_MAX if defined.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix a variety of problems such as typos, bad punctuations, or incorrect
Upstream-Status values.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes.
build-create-dirs-before-putting-files-in-them.patch
patch removed, patch included upstream.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will help one to disable the targets via bbappends if needed
e.g. musl can not compile irdaping since it uses includes
net/if_packet.h, which (on GLIBC) only defines struct sockaddr_pkt but
not in other libc e.g. musl that makes irdaping specific to glibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the building path is long, when building bind, we would meet the following
error.
".../long/path/to/bind/9.10.2-P3-r0/bind-9.10.2-P3/lib/dns" too long
This is because the in gen.c, DIRNAMESIZE is limited to 256. But in OE, the
path length limit is more than 400. So we change it to 512.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
fixes two secruity issues:
CVE-2015-5722 and CVE-2015-5986.
see release notes for more information.
ftp://ftp.isc.org/isc/bind9/9.10.2-P4/RELEASE-NOTES.bind-9.10.2-P4.html
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Makefile for mount and osd_login utilities forces
/sbin as asbindir, however on a merged /usr system this directory
might not exist. Instead sed in the system sbindir.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building with a merged /usr dir the udev directory
lives at /usr/lib/udev - update the FILES pattern to also
pick up udev files installed two levels below the / to
ensure a merged /usr works.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libelf is now a build dependency.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a bugfix release.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want the dep on pkgconfig-native, not pkgconfig, and the convention is to
inherit pkgconfig when running pkg-config at build time.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
iw uses cfg80211/nl80211, which is the way of the future. wireless-tools uses
WEXT, which uses ioctl, which is in deep maintenance mode. See
http://wireless.kernel.org/en/developers/Documentation/Wireless-Extensions.
Also https://wireless.wiki.kernel.org/en/users/Documentation/iw indicates "The
old tool iwconfing, which uses Wireless Extensions interface, is deprecated
and it's strongly recommended to switch to iw and nl80211."
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bind doesn't ship shared libraries only static libraries, so the default
dependency on PN from PN-dev is pointless and means that an image with bind-dev
installed (via dhcp-dev's automatic dependency) ends up with named installed and
started on boot which is rarely intended.
If and when we ship bind's shared libraries we should ensure that the libraries
go into a separate package.
Also remove an old comment about --enable-exportlib which isn't supported by
configure anymore.
[ YOCTO #8216 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexander Kanavin
Ross Burton
Maxin B. John
Roy Li
Fan Xin
Christopher Larson
Wenzong Fan
Paul Eggleton
Kai Kang
Chen Qi
Jussi Kukkonen
Robert Yang
Richard Purdie
Marek Vasut
Khem Raj
Cristian Iorga
Armin Kuster
Joshua Lock