| Age | Commit message (Collapse) | Author |
|---|
|
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rebase util-linux-native patch
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The check for the config variable is using the wrong define
resulting in the #else always being used.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Now Separated out libgcc-initial is there
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If image contains dbus and ptest is in DISTRO_FEATURES, dbus-ptest package
is installed, regardless of whether ptest-pkgs is in IMAGE_FEATURES. This
issue will increase size for most small images.
This patch fixes this problem.
[YOCTO #5702]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'loadkeys' program defines its own yywrap()/yylex() functions,
there is no need to link with flex shared library.
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
*fix the following error:
|/sysdeps/powerpc/powerpc32/e6500/fpu/e_sqrt.c:138:1:
| error: redefinition of '__ieee754_sqrt'
| __ieee754_sqrt (double x)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When both bash and busybox be installed, without ash support
in busybox,if bash is installed before busybox in the final stage,
even if ALTERNATIVE_PRIORITY of bash > ALTERNATIVE_PRIORITY of busybox,
the symlink from /bin/sh to bash can be yet overwritten by busybox.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Ensure that linking to the built-in.a file uses the 'nostlib'
option. Submitted to busybox mailing list here:
http://lists.busybox.net/pipermail/busybox/2014-March/080730.html
This has been accepted into upstream busybox so it will not be needed
for future versions.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the CCLD variable to ensure proper tuning parameters.
Notably when building on a x86-64 host with an i686 toolchain
there is an error building built-in.o because it is trying to
link 32-bit and 64-bit object files:
i686-pc-linux-gnu-ld --sysroot=/work/dmoseley/Mentor/amd-2014.05/build.genericx86-64-external/tmp/sysroots/genericx86-64 -r -o applets/built-in.o applets/ap
i686-pc-linux-gnu-ld: Relocatable linking with relocations from format elf64-x86-64 (applets/applets.o) to format elf32-i386 (applets/built-in.o) is not support
make[1]: *** [applets/built-in.o] Error 1
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The rule SETARCH_MAN_LINKS is used for the files under the sys-utils
dir, for example:
echo ".so man8/setarch.8" > sys-utils/linux32.8
but it depends on nothing so that the sys-utils dir may not exist, we
can create the sys-utils dir to fix problem.
[YOCTO #6115]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
*fix the following error:
|stdbuf: failed to find 'libstdbuf.so'
*PKGLIBEXECDIR is the search paths for libstdbuf.so
|PKGLIBEXECDIR='$(pkglibexecdir)'
|pkglibexecdir='${libexecdir}/${PACKAGE}'
Signed-off-by: Chunrong Guo <B40290-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tested on PowerPC MPC5125.
Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs
Part of [YOCTO #5614]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
piglit and mesa-demos are not buildable in x11-less distros so we must
to add those only when opengl and x11 DISTRO_FEATURES are available.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build Appliance includes a more recent version
of poky, up to commit:
ae938eba92b2c89a9fd91161e57c5dbc594ad4ad.
Adds bitbake fixes/optimizations;
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we run "bitbake -S base-files" today, and re-run it tomorrow with
nothing changed, we would see that the do_install.sigdata changes
because of:
do_intall -> do_install_basefilesissue -> DISTRO_VERSION -> DATE
We had set:
IMAGE_NAME[vardepsexclude] += "DATETIME"
in meta/conf/bitbake.conf, we can set a similar line in
base-files_3.0.14.bb to fix the problem.
[YOCTO #6032]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The qsort_r() was added to glibc in version 2.8, so there is no qsort_r() on
the host like CentOS 5.x, use qsort() to fix it since they are nearly
identical.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Address the error
| checking for ZLIB... no
| checking for inflate in -lz... no
| configure: error: *** Working zlib library and headers not found ***
by ensuring zlib-native is in DEPENDS.
[YOCTO #5773]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There might a failure when build util-linux with the meta-selinux layer:
[snip]
sys-utils/setpriv.c:21:20: fatal error: cap-ng.h: No such file or directory
#include <cap-ng.h>
^
compilation terminated.
[snip]
Use PACKAGECONFIG to fix the problem.
[YOCTO #6026]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The MINIX and MINIX 2 filesystems are not really used anymore.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the user, in their local configuration, to override the size of the
final image. This is useful when creating an image for (for example) an SD
card and the user wants the image to fill up the card as much as possible.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd does not recognize "rootfs" in /etc/fstab so the root
filesystem is not checked. As a result, the following message
is logged by journalctl:
systemd-fstab-generator[68]: Checking was requested for "rootfs", but it
is not a device
Changing "rootfs" to "/dev/root" in /etc/fstab allows systemd to
check the root filesystem when the kernel is booted with the root
filesystem mounted read-only.
[YOCTO #5950]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove genext2fs since we don't use it anymore, it can't support
ext4 well, either. We have used "mke2fs -d" to instead of it.
[YOCTO #6013]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Ever since the change to how aclocal files are copied (based on dependencies),
target m4 macros seem to more reliably be used in preference to native (which
they should), but in a non-gplv3 build, gettext is 0.16 while gettext-native is
0.18, causing a 0.16 po.m4 to be used with our 0.18 po/Makefile.in.in files,
causing at least some failed builds, including e2fsprogs.
Anyone inheriting gettext will have both gettext-native and gettext available,
and we don't want to use older macros from the target gettext in a non-gplv3
build, so kill them and let dependent recipes rely on gettext-native.
[YOCTO #5964]
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #5940]
Fix checks for %ms format to be a link time check
runtime checks wont work in cross compiling
Add a patch to workaround missing _SC_PHYS_PAGES
in uclibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade gettext from 0.18.3.1 to 0.18.3.2.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added connman-tools and connman-tests packages.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added ofono tests package.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch actually makes sense for uclibc more than glibc
since if we did not cache scanf_cv_alloc_modifier configure
test will determine it correctly for glibc but the test does
not do proper job when uclibc is involved the reason is it
depends on define __GLIBC_ and uclibc unfortunately poses as
glibc and defines this variable.
%m is implemented in uclibc as well and we enable it so caching value of
'ms' specifier is going to work across all libcs
This fixes mounting errors we see with util-linux/mount on
uclibc/systemd
Mar 16 01:46:40 qemux86 systemd-remount-fs[124]: /bin/mount: /proc/self/mountinfo: parse error: ignore entry at line 21.
Mar 16 01:46:40 qemux86 systemd-remount-fs[124]: /bin/mount: /proc/self/mountinfo: parse error: ignore entry at line 22.
Mar 16 01:46:40 qemux86 systemd-remount-fs[124]: /bin/mount: can't find / in /etc/fstab
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
DATADIRNAME is used by many applications using autotools
to install locale data, we get a wrong value for uclibc
systems since it does not recognise it as proper linux
systems and start putting locale info in /usr/lib instead
of /usr/share
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We get it from libiconv on uclibc anyway no need to
transplant uclibc one
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd needs it
Also update to latest master
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have been using interim location for the src_uri
now the tarballs are placed in usual location so update
the src_uri accordingly
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Max Eliaser
Saul Wold
Richard Purdie
Drew Moseley
Khem Raj
Chunrong Guo
Chong Lu
Denys Dmytriyenko
Otavio Salvador
Mike Looijmans
Jacob Kroon
Wenlin Kang
Roy Li
Robert Yang
Chunrong Guo
Jonathan Liu
Mats Kärrman
Stefan Stanacar
Cristian Iorga
Trevor Woerner
Christopher Larson
Chen Qi