summaryrefslogtreecommitdiffstats
path: root/meta/recipes-multimedia/pulseaudio
AgeCommit message (Collapse)Author
2016-01-07pulseaudio: add PACKAGECONFIG for lircMartin Jansa
* it's autodetected from sysroot Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-16meta: Drop now pointless manual -dbg packagingRichard Purdie
With the autodebug package generation logic, specifically setting FILES_${PN}-dbg isn't needed in most cases, we can remove them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-12-01pulseaudio: Fix HDMI profile selectionJussi Kukkonen
On systems with two cards, the correct output profile does not get selected automatically even in the simple case where there is one available profile. This scenario is typical at least with HDMI audio (which is on a separate card). Fixes [YOCTO #8448] Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-06pulseaudio: handle udev dir being 2 levels below /Joshua Lock
When building with a merged /usr dir the udev directory lives at /usr/lib/udev - update the FILES pattern to also pick up udev files installed two levels below the / to ensure a merged /usr works. Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-01pulseaudio: add 'autospawn-for-root' PACKAGECONFIGChristopher Larson
Since many embedded systems don't have non-root users, it's useful to be able to use pulseaudio autospawn for root as well. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-01pulseaudio: pass --with-systemduserunitdirChristopher Larson
We want to make sure our path variables are obeyed. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-31pulseaudio: improve PACKAGECONFIG for dbus/consolekit dependenciesMartin Jansa
* the problem is that consolekit module is built whenever dbus is enabled and consolekit is available only in distributions with x11 in DISTRO_FEATURES * many distributions want to enable dbus support (required for bluez support), but without consolekit because they aren't using x11 * allow to completely disable dbus (and consolekit) * add consolekit runtime dependency only for x11 in DISTRO_FEATURES Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-30libatomic-ops: move to recipes-support, fix recipe nameChristopher Larson
- This recipe is useful for more than just pulseaudio, so move it to recipes-support. - Rename to the correct upstream name, which corresponds to the library name. Keep a PROVIDES of libatomics-ops for compatibility. (From OE-Core rev: 5014de67fa6da1672626e3ec92fc51430fca3262) Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09pulseaudio: Add systemd to PACKAGECONFIG if enabled in DISTRO_FEATURESPau Espin Pedrol
Signed-off-by: Pau Espin Pedrol <pau.espin@aweurope.be> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-20pulseaudio: rdepend on modules referenced by start-pulseaudio-x11Tanu Kaskinen
pulseaudio-server contains /usr/bin/start-pulseaudio-x11 when X11 is enabled, and that script tries to load module-device-manager, module-x11-cork-request, module-x11-publish, and module-x11-xsmp. Therefore, pulseaudio-server should rdepend on those modules when X11 is enabled, otherwise the script won't work as intended. [YOCTO #8007] Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16alsa-plugins, pulseaudio: depend on speexdsp, not speexTanu Kaskinen
Speexdsp was split off from speex, and alsa-plugins and pulseaudio only depend on the speexdsp library. alsa-plugins needs also a patch, because it has so far relied on speex_types.h, which was renamed to speexdsp_types.h when speexdsp was split off, to not collide with the file that is included in speex. (From OE-Core rev: 4ee8f0dd4e9cb493d074c762bf6ff7169bcf3466) Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-06-11pulseaudio: fix version when building inside a dirty git checkoutRoss Burton
If the build directory is a subdirectory of a git clone, and that git clone is dirty, PulseAudio will build thinking it's version is 6.0-dirty. Fix git-version-gen so it doesn't do the git checks for tarball builds. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-11libatomic-ops: 7.2 -> 7.4.2Tanu Kaskinen
The backported patch is included in the new version, so dropped the patch. Dropped DESCRIPTION, because it was redundant (same as SUMMARY). Changed HOMEPAGE. libatomic_ops is nowadays maintained by Ivan Maidanski. doc/LICENSING.txt changed checksum, but there were only whitespace changes. COPYING moved from doc/ to the top-level directory, but the checksum stayed the same. Dropped PR. Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-05-24pulseaudio: conf-parser: add support for .d directoriesTanu Kaskinen
Sato images should set allow-autospawn-for-root=true in /etc/pulse/client.conf, but in non-Sato images that option should be disabled by default. I first tried to have two packages that ship different versions of the client.conf file, but it turned out to be tricky to ensure that the package manager always chooses the package that provides the default version when the Sato package is not explicitly requested. This patch allows the Sato specific configuration to be installed in /etc/pulse/client.conf.d without replacing the default version of client.conf, which makes packaging much simpler. Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-24pulseaudio: client-conf: Add allow-autospawn-for-rootTanu Kaskinen
This is related to enabling PulseAudio in Sato images. Sato doesn't have regular users; the graphical session is run as root. PulseAudio disables autospawning for root, but in Sato that's not the desired behaviour. This patch allows autospawning to be enabled for root in systems where that makes sense. Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-24alsa-plugins: initial recipeTanu Kaskinen
When PulseAudio is installed, alsa-plugins is needed to provide compatibility for ALSA applications. The dependencies are set up so that pulseaudio-server depends on alsa-plugins-pulseaudio-conf, and alsa-plugins-pulseaudio-conf depends on the PulseAudio plugins. This should make the ALSA->PulseAudio compatibility configuration work out of the box, while leaving the PulseAudio specific configuration out on systems that don't have pulseaudio-server installed. The alsa-plugins recipes in meta-guacamayo and meta-webos were used as references, but this recipe is not a straight copy of either. Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-13pulseaudio: Fix build with muslKhem Raj
It reimplements some of standard C library functions but then it assumed glibc so we need to break that assumption into conditional defines Change-Id: I92109c2e4c48ab4c3565f64e68d9cbb165823b45 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-03-20pulseaudio: remove obsolete resampler patchingTanu Kaskinen
This sed script hasn't worked since PulseAudio 0.9.8 (released in 2007), because the match condition refers to "sinc-fastest", while the default resampler is nowadays speex-float-1. The idea behind the sed script might be good, but it seems obvious that nobody is actually depending on the script, so let's just delete it. Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-20pulseaudio: add system.pa to CONFFILESTanu Kaskinen
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-20pulseaudio: move client.conf to libpulseTanu Kaskinen
This fixes a scenario where the system has libpulse installed but not pulseaudio-server. The "breakage" didn't have any big practical effects, though, because the default client.conf contains only comments anyway. Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-23pulseaudio: upgrade to 6.0Cristian Iorga
Changes: - BlueZ 5 native HSP (headset) support; - BlueZ 5 HFP (hands-free) profile support via oFono; - systemd socket activation support; - Better support for multichannel and 2.1 profiles; - Remap optimisations; - Many minor improvements, bug fixes, and i18n updates. - Switched to ${BP} variable. - Patch 0001-configure.ac-Check-only-for-libsystemd-not-libsystem.patch removed, no longer necessary. - Patch CVE-2014-3970.patch included upstrem, removed. - Slightly changed copyright notice, only a clarification. libsamplerate based resamplers are now deprecated, because they offer no particular advantage over speex. Dependency to libsamplerate0 dropped. [ RB: disable systemd until systemd.bbclass can handle user units ] Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-16pulseaudio: select distro preference for bluez providerPeter A. Bigot
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-07pulseaudio: use stricter PACKAGES_DYNAMICMartin Jansa
* I don't see any usage for libpulse-* packages * adding '-' resolves the issue when we have separate recipe for pulseaudio-modules-droid which isn't built to satisfy RDEPENDS with the same name, because generic pulseaudio recipe seems to RPROVIDE it through PACKAGES_DYNAMIC Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21libatomics-ops: add aarch64 target iniitial supportKai Kang
Add patch for libatomics-ops to add aarch64 target iniitial support. It is from linaro repo. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-29pulseaudio: fix CVE-2014-3970Shan Hai
The pa_rtp_recv function in modules/rtp/rtp.c in the module-rtp-recv module in PulseAudio 5.0 and earlier allows remote attackers to cause a denial of service (assertion failure and abort) via an empty UDP packet. Fix it by picking a patch from pulseaudio upstream code. Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-25pulseaudio: add missing dependency on libcapJackie Huang
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19libatomics-ops: Extend to nativesdkRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-17libatomic-ops: Add BBCLASSEXTEND for native (to support bdwgc-native)Richard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-25Globally replace 'base_contains' calls with 'bb.utils.contains'Otavio Salvador
The base_contains is kept as a compatibility method and we ought to not use it in OE-Core so we can remove it from base metadata in future. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21pulseaudio: Upgrade 4.0 -> 5.0Khem Raj
bluetooth-proximity has been removed in 5.0 pulseaudio now differentiates between bluez4 and bluez5 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-19pulseaudio: Make it compatible with systemd-209Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-02Replace one-line DESCRIPTION with SUMMARYPaul Eggleton
A lot of our recipes had short one-line DESCRIPTION values and no SUMMARY value set. In this case it's much better to just set SUMMARY since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY is at least useful. I also took the opportunity to fix up a lot of the new SUMMARY values, making them concisely explain the function of the recipe / package where possible. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-12-16pulseaudio: only package consolekit module when x11 is enabledChristopher Larson
As requested by Martin Jansa <martin.jansa@gmail.com>. Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-05pulseaudio: fix RDEPENDS traversal for consolekitChristopher Larson
Include the console-kit module in PACKSGES explicitly so bitbake can map to the RDEPENDS we define for it in this recipe, and thereby ensure that when adding the console-kit module to an image, we also get the necessary consolekit package produced. Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-20libjson: update to 0.11 and rename to json-cJack Mitchell
libjson is now known as json-c. Config.status is removed as it breaks seperate build dir builds. Built without parallel make as it fails, official word is not to bother trying. Signed-off-by: Jack Mitchell <jmitchell@cbnl.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-29pulseaudio: Fix build break on armebKhem Raj
There is no need for += when using append hence removed and added a leading space appropriately Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-02pulseaudio: disable GTK+ by defaultRoss Burton
PulseAudio's GTK+ support is limited to a test case and automatic icon name population for applications. This is too limited to enforce GTK+ 3 on all builds, so disable it by default. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26pulseaudio: Fix up configure options and use gtk+3Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-27pulseaudio: upgrade to v4.0Cristian Iorga
pulseaudio_fix_for_x32.patch removed; included in upstream. general recipe clean-up (multiple src URI removed, inheritance grouping, dependency grouping). parallel make is now active (was disabled in version 0.9). Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-23pulseaudio: add PACKAGECONFIG for jackMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18pulseaudio: Removed avahi forced dependencyFelipe F. Tonello
Only adds avahi dependency when zeroconf is in DISTRO_FEATURES. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Added missing '' in base_contains() Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18pulseaudio: Added cli-protocol-unix to pulseaudio-miscFelipe F. Tonello
This is necessary since pacmd uses this module. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-22pulseaudio: install alsa mixer data filesGeorge Kiagiadakis
These data files are required for module-alsa-card to load properly Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-17pulseaudio: Set udev variables using pkg-configRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-11pulseaudio: remove spurious cd in do_compile_prependRoss Burton
This prepend was cding to ${S}, which then breaks base_do_compile as it assumes it's in ${B}. The cd is pointless as all of the operations use absolute paths, so remove it. The result of this was that base_do_compile was failing to find the makefiles, so the compilation happened in do_install. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-16libatomics-ops: fix PN -> BPN in do_install for multilibsJackie Huang
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-07pulseaudio: respect the systemd DISTRO_FEATURERoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-07pulseaudio: rationalise existing configuration using PACKAGECONFIGRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-02pulseaudio: add config option to ensure valgrind is excludedSaul Wold
There have been occasions that pulseaudio sees valgrind and then later it's not available, adding this setting ensures determinism by disabling it by default Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-22pulseaudio: upgrade to 3.0Cristian Iorga
ARM Neon instruction set compilation error fixed. Build system disables Neon optimisations if ARM target does not support it. BT support dependent on bluez and sbc support. sbc package added as a dependency. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-19 06:31:24 +0000