| Age | Commit message (Collapse) | Author |
|---|
|
* Fixed:
The netmap has been blacklisted in
meta-networking/recipes-kernel/netmap/netmap_git.bb, but lib32-netmap still can
be built (suppose it doesn't depend on another broken recipe netmap-modules, it
is a little complicated, will talk below):
$ bitbake lib32-netmap
This is because of the old code masks on bb.event.ConfigParsed which can only
handle global blacklist, netmap sets blacklist in the recipe, so it can't be
handled, and lib32-netmap can be built. which was incorrect:
blacklist_multilib_eventhandler[eventmask] = "bb.event.ConfigParsed"
Move multilib code into multilib.bbclass can fix the problem easily:
$ bitbake lib32-netmap
ERROR: Nothing PROVIDES 'lib32-netmap'
ERROR: lib32-netmap was skipped: Recipe is blacklisted: BROKEN: <foo>
* Not fixed
Another problem is netmap-modules has also been blacklisted in the recipe, and
the recipe inherits module.bbclass, so multilib.bbclass doesn't handle it as the
code shows:
# There should only be one kernel in multilib configs
# We also skip multilib setup for module packages.
provides = (e.data.getVar("PROVIDES") or "").split()
if "virtual/kernel" in provides or bb.data.inherits_class('module-base', e.data):
raise bb.parse.SkipPackage("We shouldn't have multilib variants for the kernel")
And netmap-modules provides lib32-netmap-modules which is handled in
multilib_global.bbclass, so bitbake lib32-netmap-modules can't show
the blacklist message:
$ bitbake netmap-modules
ERROR: Nothing PROVIDES 'netmap-modules'
ERROR: netmap-modules was skipped: Recipe is blacklisted: BROKEN: <foo>
ERROR: netmap-modules was skipped: We shouldn't have multilib variants for the kernel
$ bitbake lib32-netmap-modules
ERROR: Nothing PROVIDES 'lib32-netmap-modules'. Close matches:
netmap-modules
netmap-modules
lib32-fbset-modes
Note the different messages between netmap-modules and lib32-netmap-modules.
This is because multilib.bbclass doesn't handle the "module" recipe so
there is no PN called lib32-netmap-modules, therefore blacklist.bbclass can't
handle it.
Note, there are two "netmap-modules" which needs to be fixed later.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
To fix a problem when print ERROR after a ptest timeout, this
causes the user confusion about if a test ends or not.
[YOCTO #10842]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch ensures videometa is added to mem2mem decoder output in case
the output frames have padding rows/columns
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Dependencies on svn:// urls were failing as the cleandirs on do_fetch was destroying
any sysroot setup by the extend_recipe_sysroot function.
Add code so that if the task do_fetch, we move the cleandirs to a separate function before
the extend_recipe_sysroot prefunc else we'd wipe out the sysroot we just created.
This allows fetcher do_populate_sysroot dependencies to work correctly again.
I did try various other approaches and a seperate function with cleandirs was the
cleanest way to add this without code duplication or too much complexity.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport upstream commit to address vulnerabilities:
CVE: CVE-2017-6965
[BZ 21137] -- https://sourceware.org/bugzilla/show_bug.cgi?id=21137
Fix readelf writing to illegal addresses whilst processing corrupt input
files containing symbol-difference relocations.
PR binutils/21137
* readelf.c (target_specific_reloc_handling): Add end parameter.
Check for buffer overflow before writing relocated values.
(apply_relocations): Pass end to target_specific_reloc_handling.
CVE: CVE-2017-6966
[BZ 21139] -- https://sourceware.org/bugzilla/show_bug.cgi?id=21139
Fix read-after-free error in readelf when processing multiple, relocated
sections in an MSP430 binary.
PR binutils/21139
* readelf.c (target_specific_reloc_handling): Add num_syms
parameter. Check for symbol table overflow before accessing
symbol value. If reloc pointer is NULL, discard all saved state.
(apply_relocations): Pass num_syms to target_specific_reloc_handling.
Call target_specific_reloc_handling with a NULL reloc pointer
after processing all of the relocs.
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also, they were previously squashed into a single patch; restore
the original two-patch arrangement.
As requested here:
http://lists.openembedded.org/pipermail/openembedded-core/2017-April/135460.html
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move config/Makefile in libdir from core package to dev package for
python, because it is only needed in development process.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was causing a couple of ptest failures.
[YOCTO #10840]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All build project test cases will try to copy the requested source
artefacts from DL_DIR before fetching. This testcase is referencing bzipped
tarball whereas the recipe fetches a gzipped tarball.
Switch to fetching the gzipped tarball in the test case so that we're able
to use a cached tarball from DL_DIR
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the TaskArtifacts event to scan the SDK and ESDK manifests
to cleanly collect the respective artifact files.
The previous method was broken when the SDK file deployment moved
from the do_populate_sdk[_ext] tasks to their sstate tasks. That
method is disabled (but not yet removed) in preparation for the
rest of refactor work for the parent #10283 work.
[YOCTO #10850]
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update Upstream-Status tags and apply 010-fix-rpmatch.patch
unconditionally, since it's merged unconditionally upstream.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Save a file per task listing sha256sums for each file staged, i.e.
the output of the task. Some caveats:
1) This only covers sstate tasks since it uses SSTATEPOSTUNPACKFUNCS,
however those are generally the most interesting in terms of output
anyway.
2) The signature is taken before applying any relocations, so any
relocated files will actually have different signatures, but that's
churn that you probably won't want to see here.
3) At the moment if you run the same build twice without sstate you will
very likely see changes in the output for certain tasks due to things
like timestamps being present in the binary output. Fixing that is
a general Linux ecosystem problem - see this page for our efforts to
resolve it on our side:
https://wiki.yoctoproject.org/wiki/Reproducible_Builds
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Append to the value with appendVarFlag() instead of setting it outright,
so that we can also append to it in other places. Accordingly, this
varflag is pipe-separated (since we want to be able to exclude any
string fragment, in this case including the leading space), thus put a
leading pipe character to play nicely with any existing value.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the code underpinning bitbake-diffsigs to add an option to
buildhistory-diff to determine and display the differences between the
actual signature inputs, with a twist - we collapse identical
changes across different tasks, showing only the most recent task to
have that difference, meaning that there's less noise to wade through
when you just want to know what changed in order to cause some
rebuilding you're seeing.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having added writing out of the task signature list to buildhistory
(when BUILDHISTORY_FEATURES includes "task"), we now need a way to
compare the list. This just shows which tasks have been added / changed
signature / removed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we want to determine what changed since the last build, one angle
from which to look at it is to check the signatures. However, if we
don't actually have the signatures from the last build we don't have
anywhere to start. Save the signatures on each build in order to give us
the starting point.
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* 54807d47 aarch64: add single instruction math functions
* b6e1fe0d fix strptime output for %C without %y
* 834ef7af fix processing of strptime %p format
* 85dfab7e fix off-by-one in strptime %j
* 9571c531 regex: fix newline matching with negated brackets
* e6917ece increase limit on locale name length from 15 to 23 bytes
* e4fc9ad7 search locale name variants for gettext translations
* 16319a5d make setlocale return a single name for LC_ALL if all categories match
* 0c53178e fix dlopen/dlsym regression opening libs already loaded at startup
* dbff2bb8 fix POSIX-format TZ dst transition times for southern hemisphere
* 74bca42e s390x: fix fpreg_t and remove unused per_struct
* a393d5cc precalculate gnu hash rather than doing it lazily in find_sym inner loop
* 8cba1dc4 fix threshold constants in j0f, y0f, j1f, y1f
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fedorahosted.org was retired on March 1st, 2017. This is to
update the SRC_URI to point to github.com.
Update the ${PN} to ${BPN} in order to pass the autobuilder
mulitlib enable configuration.
[YOCTO #11226]
Signed-off-by: Choong YinThong <yin.thong.choong@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enabling or disabling buildhistory caused a rebuild of images, which
is undesirable. For example, it prevented image reuse from a main
build with buildhistory in a following oe-selftest where buildhistory
must be disabled.
The reason are the additional ROOTFS_POSTUNINSTALL_COMMAND and
ROOTFS_POSTUNINSTALL_COMMAND entries. Those need to be excluded both
via vardepvalueexclude and vardepsexclude.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default the feed_archs variable is split into single characters
resulting in very many broken short repo_uris. Add a split() to
split the string into words first.
Signed-off-by: Ian.Arkver <ian.arkver.dev@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Gnu-efi needs to be build for 64bit since it is a boot time tool. It
needs these 2 headers to be in 64 bit versions, we can use the existing
32bit ones as there is not really any difference.
[YOCTO #11051]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The method "prioritized" returns a list sorted by the value
of the "priority" field, in descending order. However, if several
list items have the same priority, the ordering of those items
within the priority-sorted list becomes random. As a consequence,
we may end up with a non-deterministic oe-terminal spawning, as several
terminals have the same priority. So running commands such as
$ bitbake xxx -cdevshell
$ bitbake yyy -cmenuconfig
may spawn a different terminal each time, for example sometimes Gnome
and sometimes Konsole as hey have the same priority.
Rather than modifying the priorities so they all differ, we sub-sort
the list based on (terminal) names.
This way we achieve a deterministic outcome.
[YOCTO#10938]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_fetch"
There seems to be an issue with the patch, revert for now.
This reverts commit cd5e0a32184d98beb8d81e6b5527166d3ca4fb3c.
|
|
Dependencies on svn:// urls were failing as the cleandirs on do_fetch was destroying
any sysroot setup by the extend_recipe_sysroot function.
Add code so that if the task do_fetch, we move the cleandirs to the extend_recipe_sysroot
task else we'd wipe out the sysroot we just created.
This allows fetcher do_populate_sysroot dependencies to work correctly again.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script appears broken and is actively breaking build directories.
For example, binutils-cross-i586 gets run do_fetch to do_populate_sysroot by:
$ oe-selftest -r devtool.DevtoolTests.test_devtool_virtual_kernel_modify
then:
$ oe-selftest -r oescripts.BuildhistoryDiffTests.test_buildhistory_diff
wipes out the contents of tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/
but does not wipe out the corresponding stamps, then:
$ oe-selftest -r runtime-test.Postinst.test_postinst_rootfs_and_boot
needs binutils-cross-i586:do_populate_lic and if and only if this is
unavailable from sstate, it fails since it thinks the source is already
unpacked when it isn't resulting in:
WARNING: binutils-cross-i586-2.28-r0 do_populate_lic: Could not copy license file /home/pokybuild/yocto-autobuilder/yocto-worker/nigh
tly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB to /home/pokybuild/yocto-autobuilder/yocto
-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/license-destdir/binutils-cross-i586/COPYING3.LI
B: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-l
inux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB'
ERROR: binutils-cross-i586-2.28-r0 do_populate_lic: QA Issue: binutils-cross-i586: LIC_FILES_CHKSUM points to an invalid file: /home/
pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3 [license-checksum]
and similar errors.
Its safer for users to wipe tmp than try and maintain scripts which try
to remove pieces of tmp and get it wrong so remove the script.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cleanup-workdir isn't a partcularly good way to attempt to cleanup after
tests and in some cases is actively breaking the workdir. Whilst this is
a bug in cleanup-workdir, I'd prefer it didn't break tests, particularly
when as far as I can see, these calls are "belt and braces" and don't appear
to serve a specific purpose. If this introduces bugs, we should fix this
bugs.
For the purposes of history, binutils-cross-i586 gets run do_fetch to
do_populate_sysroot by:
$ oe-selftest -r devtool.DevtoolTests.test_devtool_virtual_kernel_modify
then:
$ oe-selftest -r oescripts.BuildhistoryDiffTests.test_buildhistory_diff
wipes out the contents of tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/
but does not wipe out the corresponding stamps, then:
$ oe-selftest -r runtime-test.Postinst.test_postinst_rootfs_and_boot
needs binutils-cross-i586:do_populate_lic and if and only if this is
unavailable from sstate, it fails since it thinks the source is already
unpacked when it isn't resulting in:
WARNING: binutils-cross-i586-2.28-r0 do_populate_lic: Could not copy license file /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB to /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/license-destdir/binutils-cross-i586/COPYING3.LIB: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB'
ERROR: binutils-cross-i586-2.28-r0 do_populate_lic: QA Issue: binutils-cross-i586: LIC_FILES_CHKSUM points to an invalid file: /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3 [license-checksum]
and similar errors.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The python-pycurl recipe can be used with python2 only even
though python3 is officially supported by upstream.
Create python3-pycurl recipe enabling the pycurl module for
python3.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some distros (ubuntu 16.10, debian-testing) default to gcc configured with
--enable-default-pie (see gcc -v). This breaks e.g. prelink-native on a pie
default system if binutils-native was built on a system which is not pie default
We therefore enable pie unconditionally for native recipes where static libs are
used such as libiberty from binutils, for now, until our minimum distro set is
all default pie.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The --disable-static option doesn't exist in ncurses. Its equivalent is
--without-normal so remove the option which does nothing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Yes, the option to disable static libraries in boost really is
"--without-normal". Add this for ncurses and its variants.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intent in these tests was to find something early in the bootstrap
process to run tests against which didn't require long build times.
This breaks with the removal of the glibc-initial do_build target.
Replacing it with linux-libc-headers seems like a good choice
and simplifies the conditionals too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some TARGET_* flags are being exported in bitbake.conf currently, so
they are impacting all the tasks of a cross-canadian recipe even they
are not in use at all.
This can lead a lot of churn when the cross-canadian sysroot are shared
by machines while they have defined different TARGET_* flags.
Fix it by overriding with BUILDSDK_* flags.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some TARGET_* flags are being exported in bitbake.conf currently, so
they are impacting all the tasks of a nativesdk recipe even they are
not in use at all.
This can lead a lot of churn when the nativesdk sysroot are shared by
machines while they have defined different TARGET_* flags.
Fix it by overriding with BUILDSDK_* flags.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some TARGET_* flags are being exported in bitbake.conf currently, so
they are impacting all the tasks of a crosssdk recipe even they are
not in use at all.
This can lead a lot of churn when the crosssdk sysroot are shared by
machines while they have defined different TARGET_* flags.
Fix it by overriding with BUILD_* flags.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some TARGET_* flags are being exported in bitbake.conf currently, so
they are impacting all the tasks of a cross recipe even they are not
in use at all.
This can lead a lot of churn when the cross sysroot are shared by
machines while they have defined different TARGET_* flags.
And sometimes it even causes "Taskhash mismatch" errors.
Fix it by overriding with BUILD_* flags.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In find_siginfo(), which is used by bitbake-diffsigs among other things,
avoid adding a siginfo file from the sstate-cache where we've already
collected a sigdata file from the stamps directory with the same hash.
This avoids the possibility that the top two files (as picked by default
using the bitbake-diffsigs -t option) are for the same signature and
thus the tool would report no differences. In order to do that, just use
the hashfiles dict that we already have - we just need to change the
code to populate that even if we're collecting matching files without
looking for a fixed set of hashes (i.e. taskhashlist isn't set).
This replaces previous code in bitbake-diffsigs that attempted to filter
these out with limited success.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When comparing signatures with bitbake-diffsigs -t or bitbake -S
printdiff, we use this find_siginfo() function implemented in this
module to find the siginfo/sigdata files corresponding to the tasks
we're looking for. However, native sstate files go into a
NATIVELSBSTRING subdirectory and there was no handling for this when
asking about native recipes.
I'm not even sure why we were walking SSTATE_DIR in order to find
this - we don't need to, we just need to run glob.glob() on the filespec
we calculate, which should be a little bit more efficient.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
meta/conf/bitbake.conf puts python2.7 into the HOSTTOOLS variable but not
python2, so only python2.7 is guaranteed. In addition, on some distros -- such
as Amazon Linux -- /usr/bin/python2 doesn't exist but python2.7 does. So, use
python2.7 for the --python= argument in the qemu configure step.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The unit test requires x11 as distro feature, otherwise it will fail
while building the test requirements.
[YOCTO #10903]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed dependency task for syslinux from do_build to
do_populate_sysroot as do_build dependency caused conflicts in
populating image recipe sysroot using conflicting recipes. This
makes do_image_wic task to fail with FileExistsError trying to
copy the same file from two conflicting recipes.
This should also speed up image creation a bit as do_populate_sysroot
task is faster than do_build.
[YOCTO #11295]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building gcc-cross-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backport the fix from upstream GCC to enable the build with GCC 7
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport a fix from upstream for a -Wformat-truncation=2 warning
and implement a simple fix for a -Wimplicit-fallthrough warning.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We never need these tasks as dependencies of other sstate tasks since
they're only ever needed to build artefacts so we can always skip them
and save some time/space.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Two identical builds can end up having deploy/licenses folders
that differ. This is observed in cases where there are several
different license files of the same name in different folders,
i.e. "COPYING". In those case we have to differentiate the files
somehow and we do it via file expensions such as COPYING.0, COPYING.1.
However, which file will get which extension is presently random.
This means, for example, that COPYING.0 in one build is the same
as COPYING.1 in the other (and vice versa).
Although there is mothing wrong with this, for the sake of binary
reproducibility it is preferable to have a deterministic outcome.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
WIC test case requires wic-tools which in turn depends on intltool-native and
gettext-native. However, if NLS is disable, the gettext-minimal-native is used instead
of gettext-native causing a failure on intltool-native as seen below:
checking for msgfmt... no
checking for gmsgfmt... no
configure: error: GNU gettext tools not found; required for intltool
ERROR: Function failed: do_configure (log file is located at /home/lsandov1/poky/build/tmp/work/i586-poky-linux-musl/systemd-boot/232-r0/temp/log.do_configure.7518)
ERROR: Task (/home/lsandov1/poky/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 609 tasks of which 604 didn't need to be rerun and 1 failed.
[YOCTO #10902]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The http.server module from python3-netclient imports the html module
which is in python3-html. Also xmlrpc.server imports pydoc which is a
part of python3-pydoc. But those run-time dependencies are missing
from python3-netclient and python3-xmlrpc respectively.
Add the missing run-time dependencies.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's length is usually 128 as defined in /usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
So there would be errors when /path/to/hosttools/bash is longer than 128:
/bin/sh: ./doltcompile: [snip]: bad interpreter: No such file or directory
Set ac_cv_path_DOLT_BASH to "/usr/bin/env bash" to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shebang's length is usually 128 as defined in /usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
So there would be errors when /path/to/hosttools/perl is longer than 128.
This patch fixes the problem when POSIX_SHELL and perl are used as the interpreters.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Robert Yang
Aníbal Limón
Carlos Rafael Giani
Richard Purdie
Yuanjie Huang
Alexander Kanavin
Li Zhou
Joshua Lock
David Reyna
Andre McCurdy
Paul Eggleton
Khem Raj
Choong YinThong
Patrick Ohly
Ian.Arkver
Saul Wold
Juro Bystricky
Dmitry Rozhkov
Ming Liu
Martin Kelly
Leonardo Sandoval
Ed Bartosh
Martin Jansa