summaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* test-dependencies.sh: remove /sysroots* between component buildsMartin Jansa2018-05-151-2/+2
| | | | | | | | | | | | | | | | | * glibc is now the only component in morty release which is using TMPDIR/sysroots-components (normally used only after RSS): oe-core$ git grep "\${STAGING_DIR}-components" meta/recipes-core/glibc/glibc-locale.inc:LOCALETREESRC = "${STAGING_DIR}-components/${PACKAGE_ARCH}/glibc-stash-locale" meta/recipes-core/glibc/glibc-mtrace.inc:SRC = "${STAGING_DIR}-components/${PACKAGE_ARCH}/glibc-stash-locale/scripts" meta/recipes-core/glibc/glibc-package.inc:do_stash_locale[sstate-outputdirs] = "${STAGING_DIR}-components/${PACKAGE_ARCH}/glibc-stash-locale" meta/recipes-core/glibc/glibc-package.inc:do_stash_locale[sstate-fixmedir] = "${STAGING_DIR}-components/${PACKAGE_ARCH}/glibc-stash-locale" meta/recipes-core/glibc/glibc-scripts.inc:SRC = "${STAGING_DIR}-components/${PACKAGE_ARCH}/glibc-stash-locale/scripts" test-dependencies selective pruning of TMPDIR, deletes sysroots, but not sysroots-components which leaves TMPDIR/sysroots-components files from qlibc.do_stash_locale behind and when next build started in the same workspace it failed, because it was trying to overwrite files already there. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* sstate-diff-machines.sh: Replace MACHINE_ARCH only at the beginning and ↵Martin Jansa2018-05-151-1/+1
| | | | | | | | | | | separated with dash * I had some components where the MACHINE name was also included in PV of allarch recipe which was tripping the script into saying that they have different signatures (because for one MACHINE was the string in PV replaced with 'MACHINE' and not for other MACHINEs Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* sstate-sysroot-cruft.sh: Extend the whitelistMartin Jansa2018-05-151-0/+2
| | | | | | | * add more php5 entries Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* scripts/runqemu: avoid overridden user input for bootparamsDmitry Rozhkov2017-09-041-2/+5
| | | | | | | | | | | | | | | | | | | | | | Currently runqemu hardcodes the "ip=" kernel boot parameter when configuring QEMU to use tap or slirp networking. This makes the guest system to have a network interface pre-configured by kernel and causes systemd to fail renaming the interface to whatever pleases it: Feb 21 10:10:20 intel-corei7-64 systemd-udevd[201]: Error changing net interface name 'eth0' to 'enp0s3': Device or resource busy, Always append user input for kernel boot params after the ones added by the script. This way user input has priority over runqemu's default params. (From OE-Core rev: 3f68b5c8d24b52aed5bb3ed970dd8f779b65b1b3) Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* sstate-sysroot-cruft: Add /etc/ld.so.conf to whitelistMartin Jansa2017-08-291-0/+12
| | | | | | | | | * it reports at least 2 issues in every build (this file in native and target sysroot) add it to whitelist Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* test-dependencies.sh: Strip also '\.bb: .*' before adding failed recipe to ↵Martin Jansa2017-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | list of failed * format of bitbake tasks changed in: 2c88afb taskdata/runqueue: Rewrite without use of ID indirection -ERROR: Task 4 (/OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb, do_fetch) failed with exit code '1' +ERROR: Task /OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb:do_fetch (/OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb:do_fetch) failed with exit code '1' so strip not only '\.bb, .*' used before, but also '\.bb:.*' to drop the task name to get recipe name. * for more details see: http://lists.openembedded.org/pipermail/openembedded-core/2016-June/123132.html * without this change you can see test-dependencies.sh trying to rebuild packages like: Building recipe: fbprogress (6/21) Building recipe: fbprogress.bb:do (7/21) where the later of course doesn't exist as a recipe Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: fix calculation of partition numberEd Bartosh2017-08-291-1/+1
| | | | | | | | | | | | | Total number of partitions should be taken into account when calculating real partition number for msdos partition table. The number can be different for the 4th partition: it can be 4 if there are 4 partitions in the table and 5 if there are more than 4 partitions in the table. In the latter case number 4 is occupied by extended partition. [YOCTO #11790] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: partition: Run fsck on EXT file systemsDaniel Schultz2017-08-291-0/+3
| | | | | | | | | | | Mkfs may create EXT file systems which can only be optimized by fsck and not by itself, e.g. directory optimization (in Pass 3A). To prevent those optimizations during runtime, it will be performed after the creation of an EXT file system. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* python-3-manifest: fix adding imp to importlibAnders Darander2017-05-181-1/+1
| | | | | | | | | | | Commit: 512334f102a33833d39af53467894315f0715d07 "python-3.5-manifest: Add imp to importlib" added imp to importlib in the generated manifest, but not in the generator script. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* runqemu: support multiple qemus running when nfsRobert Yang2017-05-182-24/+43
| | | | | | | | | | | | | | | | | | | | | | | | | Fixed: * In build1: $ runqemu nfs qemux86-64 In build2: $ runqemu nfs qemux86-64 It would fail before since the port numerbs and conf files are conflicted, now make runqemu-export-rootfs work together with runqemu to fix the problem. * And we don't need export PSEUDO_LOCALSTATEDIR in runqemu, the runqemu-export-rootfs can handle it well based on NFS_EXPORT_DIR. * Remove "async" option from unfsd to fix warning in syslog: Warning: unknown exports option `async' ignored * Fixed typos Both slirp and tap can work. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* runqemu-export-rootfs: fix inconsistent var namesRobert Yang2017-05-181-12/+9
| | | | | | | | | | | | | | | | | | Fixed: $ runqemu nfs qemux86-64 [snip] On your target please remember to add the following options for NFS nfsroot=IP_ADDRESS:/path/to/nfsroot,nfsvers=3,port=,mountprog=,nfsprog=,udp,mountport= [snip] Note that the values are null, this is because their var names are inconsistent. [YOCTO #10519] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: plugins: rawcopy: Fixed wrong variable typeDaniel Schultz2017-05-181-1/+1
| | | | | | | | | | | | | | | | Without the int() function this variable will be a string. This will led to a error in Filemap on line 545 due wrong types. > [...] > File > ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy > if start < skip < end: > TypeError: unorderable types: int() < str() Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ross Burton <ross.burton@intel.com> (cherry picked from commit 46b5814bcdc0e7e3cb293e877e2aa949baf5fef8) Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: filemap: Fixed spared_copy skipDaniel Schultz2017-05-181-3/+3
| | | | | | | | | | | This patches removes the empty space in front of the copied file which was skipped. Without this reduction it's not possible to place a partition with rawcopy and skip parameter on a desired alignment. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ross Burton <ross.burton@intel.com> (cherry picked from commit 5c024d71f9413b81ee1707dbc41f0721f8f27bdb) Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: Create a logical partition only when it is really mandatoryAlessio Igor Bogani2017-01-111-3/+4
| | | | | | | | | | | | Don't worth bother with logical partition on MBR partition type (aka msdos) if disk image generated by wic should have 4 partitions. (From OE-Core rev: 36a558fbdc96094626e7de1a3510691e30885368) Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* recipetool: fix encoding-related errors creating python recipesPaul Eggleton2017-01-111-2/+2
| | | | | | | | | | | | | Yet another instance of us expecting a string back from subprocess when in Python 3 what you get back is bytes. Just decode the output within run_command() so we avoid this everywhere. (From OE-Core rev: 103faae78cdff5280c7b7cdb7ca01e0868d02ec9) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* scripts/send-pull-request: Avoid multiple chain headersPatrick Ohly2017-01-111-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | When creating a patch set with cover letter using the send-pull-request script, both the "In-Reply-To" and "References" headers are appended twice in patch 2 and subsequent. That's because git-format-patch already inserted them and then git-send-email repeats that. Suppressing mail threading in git-send-email with --no-thread avoids the problem and is the right solution because it works regardless whether git-send-email is called once or twicee. Repeating these headers is a violation of RFC 2822 and can confuse mail programs. For example, Patchwork does not detect a patch series problem when there are these extra headers. [YOCTO #10718] (From OE-Core rev: 303a1aa3df43eb0b693d8602062fa33c4a08fdd6) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: fix function comment typosMaciej Borzecki2017-01-111-2/+2
| | | | | | | | | | | | Fix typos in documentation of Image.add_partition() and Image.__format_disks(). (From OE-Core rev: f5bf7bf253224912c66bab89f48ff63a73e0d698) Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: check that filesystem is specified for a rootfs partitionMaciej Borzecki2017-01-111-0/+4
| | | | | | | | | | | | | | We explicitly check for --fstype if no source was provided for a partition. However, this was not the case for rootfs partitions. Make sure to raise an error if filesystem was left unspecified when preparing a rootfs partition image. (From OE-Core rev: b8c35fcad57810a87aa25ebeb533adf286eed565) Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* wic: make sure that partition size is always an integer in internal processingMaciej Borzecki2017-01-113-6/+12
| | | | | | | | | | | | | The size field of Partition class is expected to be an integer and ought to be set inside prepare_*() method. Make sure that this is always the case. (From OE-Core rev: a37838f995ae642b0b8bdd47a605a264fb3bf200) Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* systemd-bootdisk.wks: use PARTUUIDEd Bartosh2017-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Root device name in systemd-bootdisk.wks is 'sda'. This can cause images, produced using this wks to refuse booting if real device name is not 'sda'. For example, when booting MinnowBoard MAX from MicroSD card the boot process stucks with this message on the boot console output: Waiting for root device /dev/sda2... This happens because real device name of MicroSD card on this device is mmcblk1. Used --use-uuid option for root partition. This should make wic to put partiion UUID instead of device name into kernel command line. [YOCTO #10485] (From OE-Core rev: 5b73d5f484cc844affe91ec19d881d42e187f30c) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oe-setup-builddir: fix TEMPLATECONF error messagePaul Eggleton2016-11-161-1/+1
| | | | | | | | | | | | | | This directory shouldn't contain local.conf and bblayers.conf - just templates for them; except it doesn't have to contain those, it just has to exist to pass this test. Change the error message accordingly, and mention TEMPLATECONF so that the user has at least some context. (From OE-Core rev: 61adaaa4348c670769f8750223977dbefe369ffb) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* oe-pkgdata-util: Use standard verb form in help info.Robert P. J. Day2016-11-161-1/+1
| | | | | | | | | | | "Shows" -> "Show", to be consistent with standard form of help output. (From OE-Core rev: 5a7994df6cdb5af8d240e2802e6bb3d9671f17e3) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
* devtool: runqemu: work around runqemu script path assumptionPaul Eggleton2016-10-251-1/+6
| | | | | | | | | | | | | The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then it shouldn't try to run bitbake to find out the values of various variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the environment when running runqemu. Fixes [YOCTO #10447]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* canned-wks: use GPT partition tableEd Bartosh2016-10-113-3/+3
| | | | | | | | | | | | | | | | | | | | | According to UEFI specification all EFI platforms must support GUID Partition Table(GPT) disk layout. Here is a list of advantages of using GPT disk layout over the legacy MBR partitioning: - Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits). - Supports many partitions (rather than just four primary partitions). - Provides both a primary and backup partition table for redundancy. - Uses version number and size fields for future expansion. - Uses CRC32 fields for improved data integrity. - Defines a GUID for uniquely identifying each partition. - Uses a GUID and attributes to define partition content type. - Each partition contains a 36 character human readable name. Used GPT partitioning in all EFI kickstart files. Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd-bootdisk.wks: update kernel command lineEd Bartosh2016-10-111-1/+1
| | | | | | | | | | | Used ttyS0 console. Removed usage of ttyPCH0 (FRI2 leftover) Decreased bootloader timeout to 5 seconds Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed for any of reference BSPs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mkgummidisk.wks: update kernel command lineEd Bartosh2016-10-091-1/+1
| | | | | | | | | | | Used ttyS0 console. Removed usage of ttyPCH0 (FRI2 leftover) Decreased bootloader timeout to 5 seconds Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed for any of reference BSPs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mkefidisk.wks: update kernel command lineEd Bartosh2016-10-071-1/+1
| | | | | | | | | | | Used ttyS0 console. Removed usage of ttyPCH0 (FRI2 leftover) Decreased bootloader timeout to 5 seconds Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed for any of reference BSPs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mkefidisk.wks: use MSDOS partition tableEd Bartosh2016-10-071-1/+1
| | | | | | | | Stopped using GPT partition table in mkefidisk.wks as it's not supported by all reference hardware. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wic: rewrite MBR disk identifierEd Bartosh2016-10-072-3/+11
| | | | | | | | | | | | | Disk identifier created by parted doesn't match the one we generated and used in bootloader config. We need to rewrite it to make our image bootable. Modified involved API and data structures to access previously generated disk identifiers after MBR is initialized. Written disk identifiers to MBR. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wic: generate PARTUUID for MDOS partitionsEd Bartosh2016-10-072-4/+13
| | | | | | | | | | | | | | | | Added generation of partition UUIDs for MSDOS partitions. UUID for MSDOS partitions is <disk identifier>-<partition number>, where disk identifier is a random 4 bytes long number. It's usually generated when MBR/partition table is initialized. As UUID is used to point to the root partition in bootloader config we need to generate it before the MBR is initialized. After MBR is created we need to rewrite system identifier to match it with what is used in bootloader config. This will be implemented in the next commit. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wic: set PARTUUID only for gpt partition tableEd Bartosh2016-10-071-1/+1
| | | | | | | | | | | sgdisk fails to set PARTUUID for msdos partitions as it's only supported for GPT partitions. Checked partition table format to run sgdisk --partition-guid only for GPT partitions. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts: Rename 'native' to 'oe-run-native'Ulf Magnusson2016-10-061-0/+0
| | | | | | | | Makes it a bit more descriptive and potentially more discoverable. Most people seemed to prefer an oe- prefix, so let's go with that. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: modify command fails to ignore source filesStephano Cetola2016-10-051-1/+7
| | | | | | | | | | | | | | | | With recent changes to recipeutils, the list of local files returned by get_recipe_local_files could possibly include source files. This only happens when the recipe contains a SRC_URI using subdir= to put files in the source tree. These files should be ignored when populating the list of local files for oe-local-files directory. [YOCTO #10326] introduced in OE-Core revision 9069fef5dad5a873c8a8f720f7bcbc7625556309 Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: deploy-target: Avoid unnecessary dependency on awk on the targetPeter Kjellerstedt2016-10-051-1/+1
| | | | | | | | | | | | Relying on that awk is installed on the target just to extract the fourth column (i.e., the free volume size) from `df -P` is an unnecessary dependency for devtool deploy-target. As it is already using sed to mangle the output from `df -P`, this can easily be modified to only extract the free volume size. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: add: build nodejs-native if npm is needed and not availablePaul Eggleton2016-10-054-14/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the user runs devtool add on an npm:// URL (or source tree that uses node.js), and npm is not available, just build nodejs-native instead of telling the user they need to do it; if that fails because there isn't any such recipe (which would be the default, since it's not in OE-Core) then produce a slightly more readable error message hinting at what the user needs to do. Note that this forces the use of nodejs-native rather than npm on the host - this makes sense for two reasons: (1) we need it to be compatible with nodejs for the target, and (2) we have to have a recipe for that anyway, so allowing you to avoid having a recipe for the native version isn't really beneficial. There's a bit of a hack in here in order to allow this - for node.js sources that aren't fetched via npm we don't know that they are that until we've fetched and unpacked them, by which time we're inside recipetool and have an active tinfoil instance that will prevent bitbake being run. To avoid this being an issue, we allow recipetool to get to the point where we know we need npm and then exit with a specific exit code, at which point devtool can try to build it and then if that succeeds, it will re-execute recipetool. This is definitely not ideal, but it can't really be refactored and done properly until we do the tinfoil2 refactoring; in the mean time though we still want to be helpful to the user. Fixes [YOCTO #10337]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: add: display a warning for deprecated -f/--fetch optionPaul Eggleton2016-10-051-1/+1
| | | | | | | | | We want to remove the -f/--fetch option at some point (as you can now specify a URL as a positional argument instead) so display a warning that it's deprecated if it is used. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: add: fix error message when only specifying a recipe namePaul Eggleton2016-10-051-1/+1
| | | | | | | | We were supposed to be printing out the specified recipe name here but I forgot to specify a parameter for the string. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mkefidisk.wks: use partition UUID and GPT partition tableEd Bartosh2016-09-301-2/+2
| | | | | | | | | | | This is a preparation to use mkefidisk as a default wks for genericx86* BSPs. This change enables usage of partition UUID instead of device name to specify root partition in kernel command line. It should make images to boot on devices with boot device names that differ from what's mentioned in wks file. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts: add new script 'native'Ed Bartosh2016-09-301-0/+48
| | | | | | | | | | Added 'native' convenience shell script to run native tools. Example of usage: > bitbake bmap-tools-native > native bmaptool --version Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* build-perf-test-wrapper.sh: accept test case failuresMarkus Lehtonen2016-09-301-9/+14
| | | | | | | | | | | | Utilize the new return value (2) from oe-build-perf-test. Do not exit with an error in case some individual tests fail. Even if some tests fail we still want to complete successfully, that is, display and archive the results and do cleanup. The individual tests do not depend on each other anymore so test failures shouldn't affect the results of successful tests. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* oe-build-perf-test: return 2 if some tests failedMarkus Lehtonen2016-09-301-1/+1
| | | | | | | | | Add a new return value '2' that indicates that some tests failed but there were no fatal errors (i.e. configuration mistakes or bugs in the tests themselves). Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* build-perf-test-wrapper.sh: show defaults for '-a' and '-w'Markus Lehtonen2016-09-301-2/+4
| | | | | | | | Display default values for '-a' and '-w' command line arguments in the usage help text. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* build-perf-test-wrapper.sh: check for positional argumentsMarkus Lehtonen2016-09-301-0/+8
| | | | | | | | | Stricter checking of command line arguments. The script doesn't use any positional arguments so don't accept any and error out if those are found. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* runqemu: Add little endian variations for MIPSZubair Lutfullah Kakakhel2016-09-301-1/+5
| | | | | | | Add mipsel and mips64el as an option. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* scripts/buildstats-diff: implement --multi optionMarkus Lehtonen2016-09-301-26/+73
| | | | | | | | | | | | | | Makes it possible to average over multiple buildstats. If --multi is specified (and the given path is a directory) the script will read all buildstats from the given directory and use averaged values calculated from them. All of the buildstats must be from a "similar" build, meaning that no differences in package versions or tasks are allowed. Otherwise, the script will exit with an error. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* scripts/buildstats-diff: make logger msg format a bit more readableMarkus Lehtonen2016-09-301-1/+1
| | | | | Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* scripts/buildstats-diff: use exception for internal error handlingMarkus Lehtonen2016-09-301-17/+21
| | | | | Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* scripts/buildstats-diff: add walltime to --diff-attrMarkus Lehtonen2016-09-301-3/+10
| | | | | | | | For comparing the elapsed wall clock time of tests. Default values for --min-val and --min-absdiff are 5 seconds and 2 seconds. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* scripts/buildstats-diff: add read_ops and write_ops to --diff-attrMarkus Lehtonen2016-09-301-3/+24
| | | | | | | | | Two new options, making it possible to compare the number of filesystem operations of tasks. Defaults for --min-val and --min-absdiff are set to more or less arbitrary 500 and 50 operations, respectively. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* scripts/buildstats-diff: add read_bytes and write_bytes to --diff-attrMarkus Lehtonen2016-09-301-10/+36
| | | | | | | | | | These are I/O counter values from /proc/<pid>/io and represent the number of bytes read from / written to the storage layer. Default values for --min-val and --min-absdiff limits are set to 512kB and 128kB, respectively. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>