| Age | Commit message (Collapse) | Author |
|---|
|
Since inittab for qemu images now always tries to start getty on a
second serial device, make sure that device exists.
Otherwise the following message will be spammed:
INIT: Id "S1" respawning too fast: disabled for 5 minutes
[YOCTO #8374]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
When adding multiple new patches append them to SRC_URI in correct order
so that they apply correctly.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Update the location of unfsd binary from "/usr/sbin" to "/usr/bin" in
runqemu-export-rootfs
[YOCTO #8315]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When the MACHINE variable was set as an environment variable, via
"export MACHINE=qemuarm" and runqemu was executed as "runqemu qemuarm"
The confusing error message appears:
Error: conflicting MACHINE types [qemuarm] and [qemuarm]
This checks if the two values are equal, in that case there is no problem
and execution can continue.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If for example gdk-pixbuf and lib32-gdk-pixbuf are in an image then only one
${bindir}/gdk-pixbuf-query-loaders will be installed, so only one variant will
actually be usable.
Solve this by moving gdk-pixbuf-query-loaders into ${libdir} as it's intimately
tied to the library and rarely directly invoked by the user, and update the
callers to use the right path.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The skipped packages may be pulled in by another package, for example,
when libc6-dbg is already installed and should be skipped, but it would
be pulled in by libsegfault, this patch fixes the issue.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename fails over filesystem boundaries.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We only need the base configuration to get the variable values we want
to get here, there's no need to parse recipes / load the cache.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand to search to find the target recipe name providing
some file or capability. This is implemented by searching on recipe
name, package name, description, package contents (file names), and
runtime file provides. For example:
$ devtool search libGL
mesa
$ devtool search X11
xextproto
libxxf86vm
xf86driproto
xf86vidmodeproto
libxfixes
xproto
libx11
...
$ devtool search /bin/sed
busybox
sed
This is particularly useful within the extensible SDK but is also made
available in devtool alongside the build system.
Note of course that because this searches pkgdata, useful results depend
upon do_packagedata(_setscene) having executed for the recipe being
searched for.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We ship the runqemu script and if we build QEMU itself within the
extensible SDK, then it would be nice to be able to run it. This is a
very thin wrapper around runqemu, supplying the machine and image name
so the user doesn't need to. (This subcommand is only available within
the extensible SDK since it only really makes sense there where it is
otherwise hard to run runqemu directly.)
Implements [YOCTO #6657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Make image optional for the extensible SDK (auto-determine it based on
the targets the SDK was built for)
* Check that specified recipe is in fact an image
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user is running "devtool build-image" within the extensible SDK
then they probably won't know where to find the resulting output files,
so we should tell them explicitly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We build recipes and include packages into the image, adjust the
terminology used in code and messages accordingly. Also fix a few typos.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we end up printing a message about the build directory being the same
as the source, we should print that first and then print the message
about the recipe file possibly needing to be edited to the end so that
it has slightly more impact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recipes don't extract any source (for example, opkg-keyrings). We
were producing a traceback in this case because we weren't checking if
the directory existed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes that use work-shared (such as libgcc) are capable of unpacking
the source, but it doesn't necessarily unpack to ${WORKDIR}/${BP}. Use
the last part of the actual S value instead which is more likely to
work.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
unpack task
If you try to use "devtool modify -x" or "devtool extract" on a recipe
where do_unpack has been set as noexec (e.g. glibc-locale), then we get
an error because the expected source wasn't ever unpacked. Do a check up
front for noexec being set on do_unpack and error out with a reasonable
message if that's the case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The # character in a URI denotes a fragment; we don't care about this
since it is never supposed to be sent to the server, so remove it from
the URI before actually trying to fetch it or use it in SRC_URI within
the recipe.
(This has come up because download links on pypi.python.org seem to have
a fragment containing the md5sum of the download; without stripping this
off the fetcher will choke on it.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shell considers empty functions to be a syntax error, so for
template shell functions that contain only comments (or no lines at all)
then add a : to act as a no-op which avoids the syntax error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a script to run "devtool modify" followed by a build on every target
recipe in the environment (with the option to skip/resume from/only
include specific recipes). This takes far too long to run as an
oe-selftest test but is still something that is useful to be able to
run. There's also a slightly quicker mode that just runs "devtool
extract" on each recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not actually used for anything - I thought that we would need to
use it within devtool to set global configuration, but we're able to do
everything we need within the bbappends it creates, which also saves on
parse time. If we're not going to use work-config.inc let's just drop it
completely.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python3-debugger fails to be invoked to debug other scripts complaining about
not being able to import pkutil, this patch adds pkgutil as a dependency for python3-debugger
fixing the issue.
[YOCTO #8334]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-debugger (pdb) needs importlib as a dependency, if not included
it produces an error when importing pdb, making pdb unusable, this patch
adds importlib dependency fixing the issue.
{YOCT0 #8333]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Setup the qemumicroblaze machine to use the device tree provided by QEMU
instead of the device tree located in the images directory. Additionally
setup the default memory size to match the QEMU device tree.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch brings the qemu networking setup for qemuzynq and
qemumicroblaze into feature parity with the other qemu machines.
Specifically enabling TAP interface attachcment and kernel command line
IP configuration.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current default is to use SOCKS4a when socks is specified as
protocol in $ALL_PROXY. However, not all socks servers support
SOCKS4a. By allowing socks4 as an additional protocol, this script
will happily work with SOCKS4 only servers.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to an error in the regular expression used to extract a port
number specified in $ALL_PROXY, rather than allowing the port number
to be followed by an optional "/", the port was required to be
followed by "/?".
This corrects the regular expression to allow an optional "/". It also
allows the odd "/?" suffix for backwards compatibility.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Without this fix, if one specified, e.g., 127.0.0.1 in $NO_PROXY, the
oe-git-proxy script would fail with a message like this:
/home/pkj/yocto/poky/scripts/oe-git-proxy: line 64: 32-127.0.0.1: syntax error: invalid arithmetic operator (error token is ".0.0.1")
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It was wrongly assumed that part.size is meagured in Mb. In fact it's
in Kb, so there is no need to convert bitbake variable ROOTFS_SIZE as
it's also in Kb.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
This sub-command creates a bbappend for the specified target and prints the
path to the bbappend. The -w argument, as with some of the other recipetool
commands, will make a version-independent bbappend.
Example usage: recipetool newappend meta-mylayer virtual/kernel
[YOCTO #7964]
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If it is passed only the image parameter, it will show some interactive
options to help to conclude the script.
With this patch it will detect devices available in the machine, asking
to choose what it is wanted to be flashed.
it will suggest the target device. If it is a SD card the suggestion
is /dev/mmcblk0. If it is a pendrive it will suggest to use /dev/sda.
Signed-off-by: Bruno Bottazzini <bruno.bottazzini@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use already existing bb.fetch.decodeurl() for getting the parameters for
a URI. This is more fault tolerant and maintainable.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Giving anything with -image in it as bootparams or in qemuparams (for
example, an additional -drive parameter with an image file or an
"-initrd .../core-image-minimal-initramfs-qemux86.cpio.gz") caused
runqemu to treat these parameters as names of the rootfs image file.
Matching *-image) after checking the current argument for more
specific cases like bootparams and qemuparams avoids this
misinterpretation of the command line parameters.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
At least the OVFM (UEFI Firmware for Qemu and KVM) recipe stores the BIOS
under $OE_TMPDIR/sysroots/$MACHINE, now defined as OECORE_MACHINE_SYSROOT.
The latter is used when searching BIOS, VGA BIOS and keymaps. As a example,
to boot a OVFM BIOS, one can run the following command:
$ runqemu qemux86-64 core-image-minimal \
biosdir=usr/share/ovmf \
biosfilename=bios.bin \
nographic
Note the bios* parameters: these two are needed to specify the subfolder
(parent folder is OECORE_MACHINE_SYSROOT) and BIOS filename (without it,
it picks a BIOS named bios-256k.bin).
[YOCTO #5654]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Given a 'buildstats' path (created by bitbake when setting
USER_CLASSES ?= "buildstats" on local.conf) and task names, outputs
'<task> <recipe> <elapsed time>' for all recipes. Elapsed times are in
seconds, and task should be given without the 'do_' prefix.
Some useful pipelines
1. Tasks with largest elapsed times
$ buildstats.sh -b <buildstats> | sort -k3 -n -r | head
do_compile perl-5.20.0-r1 221.82
do_configure gettext-native-0.19.4-r0 140.34
do_compile openssl-native-1.0.2a-r0 107.48
do_compile openssl-1.0.2a-r0 102.10
do_configure perl-native-5.20.0-r0 90.70
do_configure gettext-0.19.4-r0 88.17
do_compile gcc-cross-i586-4.9.2-r0 83.98
do_configure m4-native-1.4.17-r0 83.44
do_compile qemu-native-2.2.0-r1 71.69
do_compile glibc-2.21-r0 60.88
2. Min, max, sum per task
$ buildstats.sh | datamash -t' ' -g1 min 3 max 3 sum 3 | sort -k4 -n -r
do_configure 0.03 140.34 1968.66
do_compile 0.01 221.82 1664.44
do_install 0.03 40.31 330.45
do_populate_sysroot 0.11 34.45 229.23
do_unpack 0.01 36.1 193.54
do_patch 0.01 9.2 62.07
do_fetch 0.01 6.66 32.13
do_populate_lic 0.09 1.65 30.7
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So far all devtool and recipetool plugins were expected
to have plugin_init function. This function is empty in
most of plugins as they don't require initialisation.
Making plugin_init optional would allow not having empty
plugin_init in every plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes more sense to have this fix after checking BUILDDIR exists, is
a directory and is writable.
[YOCTO #7669]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes the following error when running devtool from a directory other
than the build directory (or the SDK base path when using within the
extensible SDK):
The BBPATH variable is not set and bitbake did not find a
conf/bblayers.conf file in the expected location.
Maybe you accidentally invoked bitbake from the wrong directory?
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Randy Witt
Markus Lehtonen
Maxin B. John
Pascal Bach
Ross Burton
Robert Yang
Paul Eggleton
Alejandro Hernandez
Nathan Rossi
Peter Kjellerstedt
Ed Bartosh
Christopher Larson
Bruno Bottazzini
Patrick Ohly
Leonardo Sandoval
Alex Franco