# # Made by http://www.mn-logistik.de/unsupported/pxa250/patcher # --- jpeg-6b/jpegtran.1~libjpeg6bb-5 +++ jpeg-6b/jpegtran.1 @@ -131,6 +131,24 @@ .B \-rot 180 -trim trims both edges. .PP +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the JPEG format: the upper +left corner of the selected region must fall on an iMCU boundary. If this +does not hold for the given crop parameters, we silently move the upper left +corner up and/or left to make it so, simultaneously increasing the region +dimensions to keep the lower right crop corner unchanged. (Thus, the +output image covers at least the requested region, but may cover more.) + +Note: lossless-crop is an enhancement from http://sylvana.net/jpegcrop/ +that may not be available on non-Debian systems. + +The image can be losslessly cropped by giving the switch: +.TP +.B \-crop WxH+X+Y +Crop to a rectangular subarea of width W, height H starting at point X,Y. +.PP +.PP Another not-strictly-lossless transformation switch is: .TP .B \-grayscale --- jpeg-6b/configure~libjpeg6bb-5 +++ jpeg-6b/configure @@ -52,7 +52,7 @@ includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' -mandir='${prefix}/man' +mandir='${prefix}/share/man' # Initialize some other variables. subdirs= @@ -1559,7 +1559,8 @@ if test "x$LTSTATIC" = xno; then disable_static="--disable-static" fi - $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh + chmod a+x $srcdir/ltconfig.new + $srcdir/ltconfig.new $disable_shared $disable_static $srcdir/ltmain.new.sh $host fi # Select memory manager depending on user input. --- jpeg-6b/makefile.cfg~libjpeg6bb-5 +++ jpeg-6b/makefile.cfg @@ -17,7 +17,7 @@ binprefix = manprefix = manext = 1 -mandir = $(prefix)/man/man$(manext) +mandir = $(prefix)/share/man/man$(manext) # The name of your C compiler: CC= @CC@ @@ -210,6 +210,11 @@ $(INSTALL_DATA) $(srcdir)/jpeglib.h $(includedir)/jpeglib.h $(INSTALL_DATA) $(srcdir)/jmorecfg.h $(includedir)/jmorecfg.h $(INSTALL_DATA) $(srcdir)/jerror.h $(includedir)/jerror.h +#:mjpegtools require this file to build and header say: +# * These declarations are considered internal to the JPEG library; most +# * applications using the library shouldn't need to include this file. +# So it is not forbidden to use it, therefore it must be installed. + $(INSTALL_DATA) $(srcdir)/jpegint.h $(includedir)/jpegint.h clean: $(RM) *.o *.lo libjpeg.a libjpeg.la --- jpeg-6b/jpegtran.c~libjpeg6bb-5 +++ jpeg-6b/jpegtran.c @@ -1,7 +1,7 @@ /* * jpegtran.c * - * Copyright (C) 1995-1997, Thomas G. Lane. + * Copyright (C) 1995-2001, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -64,6 +64,7 @@ #endif #if TRANSFORMS_SUPPORTED fprintf(stderr, "Switches for modifying the image:\n"); + fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n"); fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n"); fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n"); @@ -134,6 +135,7 @@ transformoption.transform = JXFORM_NONE; transformoption.trim = FALSE; transformoption.force_grayscale = FALSE; + transformoption.crop = FALSE; cinfo->err->trace_level = 0; /* Scan command line options, adjust parameters */ @@ -160,7 +162,7 @@ exit(EXIT_FAILURE); #endif - } else if (keymatch(arg, "copy", 1)) { + } else if (keymatch(arg, "copy", 2)) { /* Select which extra markers to copy. */ if (++argn >= argc) /* advance to next argument */ usage(); @@ -173,6 +175,20 @@ } else usage(); + } else if (keymatch(arg, "crop", 2)) { + /* Perform lossless cropping. */ +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) { + fprintf(stderr, "%s: bogus -crop argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { /* Enable debug printouts. */ /* On first -d, print version identification */ @@ -342,8 +358,10 @@ jvirt_barray_ptr * src_coef_arrays; jvirt_barray_ptr * dst_coef_arrays; int file_index; - FILE * input_file; - FILE * output_file; + /* We assume all-in-memory processing and can therefore use only a + * single file pointer for sequential input and output operation. + */ + FILE * fp; /* On Mac, fetch a command line. */ #ifdef USE_CCOMMAND @@ -406,24 +424,13 @@ /* Open the input file. */ if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) { fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); exit(EXIT_FAILURE); } } else { /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); + fp = read_stdin(); } #ifdef PROGRESS_REPORT @@ -431,7 +438,7 @@ #endif /* Specify data source for decompression */ - jpeg_stdio_src(&srcinfo, input_file); + jpeg_stdio_src(&srcinfo, fp); /* Enable saving of extra markers that we want to copy */ jcopy_markers_setup(&srcinfo, copyoption); @@ -463,11 +470,32 @@ dst_coef_arrays = src_coef_arrays; #endif + /* Close input file, if we opened it. + * Note: we assume that jpeg_read_coefficients consumed all input + * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will + * only consume more while (! cinfo->inputctl->eoi_reached). + * We cannot call jpeg_finish_decompress here since we still need the + * virtual arrays allocated from the source object for processing. + */ + if (fp != stdin) + fclose(fp); + + /* Open the output file. */ + if (outfilename != NULL) { + if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + fp = write_stdout(); + } + /* Adjust default compression parameters by re-parsing the options */ file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); /* Specify data destination for compression */ - jpeg_stdio_dest(&dstinfo, output_file); + jpeg_stdio_dest(&dstinfo, fp); /* Start compressor (note no image data is actually written here) */ jpeg_write_coefficients(&dstinfo, dst_coef_arrays); @@ -488,11 +516,9 @@ (void) jpeg_finish_decompress(&srcinfo); jpeg_destroy_decompress(&srcinfo); - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); + /* Close output file, if we opened it */ + if (fp != stdout) + fclose(fp); #ifdef PROGRESS_REPORT end_progress_monitor((j_common_ptr) &dstinfo); --- jpeg-6b/rdjpgcom.c~libjpeg6bb-5 +++ jpeg-6b/rdjpgcom.c @@ -14,6 +14,7 @@ #define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ #include "jinclude.h" /* get auto-config symbols, */ +#include /*ballombe@debian.org: use locale for isprint*/ #include /* to declare isupper(), tolower() */ #ifdef USE_SETMODE #include /* to declare setmode()'s parameter macros */ @@ -223,7 +224,10 @@ unsigned int length; int ch; int lastch = 0; - +/* ballombe@debian.org Thu, 15 Nov 2001 20:04:47 +0100*/ +/* Set locale properly for isprint*/ + setlocale(LC_CTYPE,""); + /* Get the marker parameter length count */ length = read_2_bytes(); /* Length includes itself, so must be at least 2 */ @@ -254,6 +258,8 @@ length--; } printf("\n"); +/*ballombe@debian.org: revert to C locale*/ + setlocale(LC_CTYPE,"C"); } --- jpeg-6b/transupp.c~libjpeg6bb-5 +++ jpeg-6b/transupp.c @@ -1,7 +1,7 @@ /* * transupp.c * - * Copyright (C) 1997, Thomas G. Lane. + * Copyright (C) 1997-2001, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -20,6 +20,7 @@ #include "jinclude.h" #include "jpeglib.h" #include "transupp.h" /* My own external interface */ +#include /* to declare isdigit() */ #if TRANSFORMS_SUPPORTED @@ -28,7 +29,8 @@ * Lossless image transformation routines. These routines work on DCT * coefficient arrays and thus do not require any lossy decompression * or recompression of the image. - * Thanks to Guido Vollbeding for the initial design and code of this feature. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. * * Horizontal flipping is done in-place, using a single top-to-bottom * pass through the virtual source array. It will thus be much the @@ -42,6 +44,13 @@ * arrays for most of the transforms. That could result in much thrashing * if the image is larger than main memory. * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * * Some notes about the operating environment of the individual transform * routines: * 1. Both the source and destination virtual arrays are allocated from the @@ -54,20 +63,65 @@ * and we may as well take that as the effective iMCU size. * 4. When "trim" is in effect, the destination's dimensions will be the * trimmed values but the source's will be untrimmed. - * 5. All the routines assume that the source and destination buffers are + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are * padded out to a full iMCU boundary. This is true, although for the * source buffer it is an undocumented property of jdcoefct.c. - * Notes 2,3,4 boil down to this: generally we should use the destination's - * dimensions and ignore the source's. */ LOCAL(void) -do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays) -/* Horizontal flip; done in-place, so no separate dest array is required */ +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ { - JDIMENSION MCU_cols, comp_width, blk_x, blk_y; + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } +} + + +LOCAL(void) +do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays) +/* Horizontal flip; done in-place, so no separate dest array is required. + * NB: this only works when y_crop_offset is zero. + */ +{ + JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; int ci, k, offset_y; JBLOCKARRAY buffer; JCOEFPTR ptr1, ptr2; @@ -79,17 +133,19 @@ * mirroring by changing the signs of odd-numbered columns. * Partial iMCUs at the right edge are left untouched. */ - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); + MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; for (blk_y = 0; blk_y < compptr->height_in_blocks; blk_y += compptr->v_samp_factor) { buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Do the mirroring */ for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { ptr1 = buffer[offset_y][blk_x]; ptr2 = buffer[offset_y][comp_width - blk_x - 1]; @@ -105,6 +161,79 @@ *ptr2++ = -temp1; } } + if (x_crop_blocks > 0) { + /* Now left-justify the portion of the data to be kept. + * We can't use a single jcopy_block_row() call because that routine + * depends on memcpy(), whose behavior is unspecified for overlapping + * source and destination areas. Sigh. + */ + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, + buffer[offset_y] + blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Horizontal flip in general cropping case */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Here we must output into a separate array because we can't touch + * different rows of a single virtual array simultaneously. Otherwise, + * this is essentially the same as the routine above. + */ + MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Do the mirrorable blocks */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } else { + /* Copy last partial block(s) verbatim */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } } } } @@ -113,11 +242,13 @@ LOCAL(void) do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* Vertical flip */ { JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; int ci, i, j, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JBLOCKROW src_row_ptr, dst_row_ptr; @@ -131,33 +262,38 @@ * of odd-numbered rows. * Partial iMCUs at the bottom edge are copied verbatim. */ - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); + MCU_rows = srcinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); - if (dst_blk_y < comp_height) { + if (y_crop_blocks + dst_blk_y < comp_height) { /* Row is within the mirrorable area. */ src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor, + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, (JDIMENSION) compptr->v_samp_factor, FALSE); } else { /* Bottom-edge blocks will be copied verbatim. */ src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y, + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, (JDIMENSION) compptr->v_samp_factor, FALSE); } for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - if (dst_blk_y < comp_height) { + if (y_crop_blocks + dst_blk_y < comp_height) { /* Row is within the mirrorable area. */ dst_row_ptr = dst_buffer[offset_y]; src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + src_row_ptr += x_crop_blocks; for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; @@ -173,7 +309,8 @@ } } else { /* Just copy row verbatim. */ - jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y], + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], compptr->width_in_blocks); } } @@ -184,11 +321,12 @@ LOCAL(void) do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* Transpose source into destination */ { - JDIMENSION dst_blk_x, dst_blk_y; + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; @@ -201,6 +339,8 @@ */ for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) @@ -210,11 +350,12 @@ for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, (JDIMENSION) compptr->h_samp_factor, FALSE); for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -228,6 +369,7 @@ LOCAL(void) do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* 90 degree rotation is equivalent to @@ -237,6 +379,7 @@ */ { JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; @@ -246,11 +389,13 @@ * at the (output) right edge properly. They just get transposed and * not mirrored. */ - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); + MCU_cols = srcinfo->image_height / (dstinfo->max_h_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) @@ -259,15 +404,26 @@ for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, - (JDIMENSION) compptr->h_samp_factor, FALSE); + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + /* Edge blocks are transposed but not mirrored. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; - if (dst_blk_x < comp_width) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { /* Block is within the mirrorable area. */ - dst_ptr = dst_buffer[offset_y] - [comp_width - dst_blk_x - offset_x - 1]; + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -277,7 +433,8 @@ } } else { /* Edge blocks are transposed but not mirrored. */ - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -292,6 +449,7 @@ LOCAL(void) do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* 270 degree rotation is equivalent to @@ -301,6 +459,7 @@ */ { JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; @@ -310,11 +469,13 @@ * at the (output) bottom edge properly. They just get transposed and * not mirrored. */ - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); + MCU_rows = srcinfo->image_width / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) @@ -324,14 +485,15 @@ for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, (JDIMENSION) compptr->h_samp_factor, FALSE); for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - if (dst_blk_y < comp_height) { + if (y_crop_blocks + dst_blk_y < comp_height) { /* Block is within the mirrorable area. */ src_ptr = src_buffer[offset_x] - [comp_height - dst_blk_y - offset_y - 1]; + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -341,7 +503,8 @@ } } else { /* Edge blocks are transposed but not mirrored. */ - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -356,6 +519,7 @@ LOCAL(void) do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* 180 degree rotation is equivalent to @@ -365,89 +529,93 @@ */ { JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; int ci, i, j, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JBLOCKROW src_row_ptr, dst_row_ptr; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); + MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); + MCU_rows = srcinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); - if (dst_blk_y < comp_height) { + if (y_crop_blocks + dst_blk_y < comp_height) { /* Row is within the vertically mirrorable area. */ src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor, + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, (JDIMENSION) compptr->v_samp_factor, FALSE); } else { /* Bottom-edge rows are only mirrored horizontally. */ src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y, + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, (JDIMENSION) compptr->v_samp_factor, FALSE); } for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - if (dst_blk_y < comp_height) { + dst_row_ptr = dst_buffer[offset_y]; + if (y_crop_blocks + dst_blk_y < comp_height) { /* Row is within the mirrorable area. */ - dst_row_ptr = dst_buffer[offset_y]; src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; - /* Process the blocks that can be mirrored both ways. */ - for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[comp_width - dst_blk_x - 1]; - for (i = 0; i < DCTSIZE; i += 2) { - /* For even row, negate every odd column. */ - for (j = 0; j < DCTSIZE; j += 2) { - *dst_ptr++ = *src_ptr++; - *dst_ptr++ = - *src_ptr++; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored both ways. */ + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE; i += 2) { + /* For even row, negate every odd column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + /* For odd row, negate every even column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = - *src_ptr++; + *dst_ptr++ = *src_ptr++; + } } - /* For odd row, negate every even column. */ - for (j = 0; j < DCTSIZE; j += 2) { - *dst_ptr++ = - *src_ptr++; - *dst_ptr++ = *src_ptr++; + } else { + /* Any remaining right-edge blocks are only mirrored vertically. */ + src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; } } } - /* Any remaining right-edge blocks are only mirrored vertically. */ - for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[dst_blk_x]; - for (i = 0; i < DCTSIZE; i += 2) { - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = *src_ptr++; - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = - *src_ptr++; - } - } } else { /* Remaining rows are just mirrored horizontally. */ - dst_row_ptr = dst_buffer[offset_y]; src_row_ptr = src_buffer[offset_y]; - /* Process the blocks that can be mirrored. */ - for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[comp_width - dst_blk_x - 1]; - for (i = 0; i < DCTSIZE2; i += 2) { - *dst_ptr++ = *src_ptr++; - *dst_ptr++ = - *src_ptr++; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored. */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE2; i += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + } else { + /* Any remaining right-edge blocks are only copied. */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); } } - /* Any remaining right-edge blocks are only copied. */ - for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[dst_blk_x]; - for (i = 0; i < DCTSIZE2; i++) - *dst_ptr++ = *src_ptr++; - } } } } @@ -457,6 +625,7 @@ LOCAL(void) do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* Transverse transpose is equivalent to @@ -470,18 +639,21 @@ */ { JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); + MCU_cols = srcinfo->image_height / (dstinfo->max_h_samp_factor * DCTSIZE); + MCU_rows = srcinfo->image_width / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) @@ -490,17 +662,26 @@ for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, - (JDIMENSION) compptr->h_samp_factor, FALSE); + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - if (dst_blk_y < comp_height) { - src_ptr = src_buffer[offset_x] - [comp_height - dst_blk_y - offset_y - 1]; - if (dst_blk_x < comp_width) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + if (x_crop_blocks + dst_blk_x < comp_width) { /* Block is within the mirrorable area. */ - dst_ptr = dst_buffer[offset_y] - [comp_width - dst_blk_x - offset_x - 1]; + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -516,7 +697,8 @@ } } else { /* Right-edge blocks are mirrored in y only */ - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -526,11 +708,10 @@ } } } else { - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; - if (dst_blk_x < comp_width) { + if (x_crop_blocks + dst_blk_x < comp_width) { /* Bottom-edge blocks are mirrored in x only */ - dst_ptr = dst_buffer[offset_y] - [comp_width - dst_blk_x - offset_x - 1]; + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -540,7 +721,8 @@ } } else { /* At lower right corner, just transpose, no mirroring */ - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; @@ -554,8 +736,116 @@ } +/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. + * Returns TRUE if valid integer found, FALSE if not. + * *strptr is advanced over the digit string, and *result is set to its value. + */ + +LOCAL(boolean) +jt_read_integer (const char ** strptr, JDIMENSION * result) +{ + const char * ptr = *strptr; + JDIMENSION val = 0; + + for (; isdigit(*ptr); ptr++) { + val = val * 10 + (JDIMENSION) (*ptr - '0'); + } + *result = val; + if (ptr == *strptr) + return FALSE; /* oops, no digits */ + *strptr = ptr; + return TRUE; +} + + +/* Parse a crop specification (written in X11 geometry style). + * The routine returns TRUE if the spec string is valid, FALSE if not. + * + * The crop spec string should have the format + * x{+-}{+-} + * where width, height, xoffset, and yoffset are unsigned integers. + * Each of the elements can be omitted to indicate a default value. + * (A weakness of this style is that it is not possible to omit xoffset + * while specifying yoffset, since they look alike.) + * + * This code is loosely based on XParseGeometry from the X11 distribution. + */ + +GLOBAL(boolean) +jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) +{ + info->crop = FALSE; + info->crop_width_set = JCROP_UNSET; + info->crop_height_set = JCROP_UNSET; + info->crop_xoffset_set = JCROP_UNSET; + info->crop_yoffset_set = JCROP_UNSET; + + if (isdigit(*spec)) { + /* fetch width */ + if (! jt_read_integer(&spec, &info->crop_width)) + return FALSE; + info->crop_width_set = JCROP_POS; + } + if (*spec == 'x' || *spec == 'X') { + /* fetch height */ + spec++; + if (! jt_read_integer(&spec, &info->crop_height)) + return FALSE; + info->crop_height_set = JCROP_POS; + } + if (*spec == '+' || *spec == '-') { + /* fetch xoffset */ + info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_xoffset)) + return FALSE; + } + if (*spec == '+' || *spec == '-') { + /* fetch yoffset */ + info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_yoffset)) + return FALSE; + } + /* We had better have gotten to the end of the string. */ + if (*spec != '\0') + return FALSE; + info->crop = TRUE; + return TRUE; +} + + +/* Trim off any partial iMCUs on the indicated destination edge */ + +LOCAL(void) +trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) +{ + JDIMENSION MCU_cols; + + MCU_cols = info->output_width / (info->max_h_samp_factor * DCTSIZE); + if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == + full_width / (info->max_h_samp_factor * DCTSIZE)) + info->output_width = MCU_cols * (info->max_h_samp_factor * DCTSIZE); +} + +LOCAL(void) +trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) +{ + JDIMENSION MCU_rows; + + MCU_rows = info->output_height / (info->max_v_samp_factor * DCTSIZE); + if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == + full_height / (info->max_v_samp_factor * DCTSIZE)) + info->output_height = MCU_rows * (info->max_v_samp_factor * DCTSIZE); +} + + /* Request any required workspace. * + * This routine figures out the size that the output image will be + * (which implies that all the transform parameters must be set before + * it is called). + * * We allocate the workspace virtual arrays from the source decompression * object, so that all the arrays (both the original data and the workspace) * will be taken into account while making memory management decisions. @@ -569,9 +859,13 @@ jpeg_transform_info *info) { jvirt_barray_ptr *coef_arrays = NULL; + boolean need_workspace, transpose_it; jpeg_component_info *compptr; - int ci; + JDIMENSION xoffset, yoffset, width_in_iMCUs, height_in_iMCUs; + JDIMENSION width_in_blocks, height_in_blocks; + int ci, h_samp_factor, v_samp_factor; + /* Determine number of components in output image */ if (info->force_grayscale && srcinfo->jpeg_color_space == JCS_YCbCr && srcinfo->num_components == 3) { @@ -581,55 +875,181 @@ /* Process all the components */ info->num_components = srcinfo->num_components; } + /* If there is only one output component, force the iMCU size to be 1; + * else use the source iMCU size. (This allows us to do the right thing + * when reducing color to grayscale, and also provides a handy way of + * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) + */ + + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + info->output_width = srcinfo->image_height; + info->output_height = srcinfo->image_width; + if (info->num_components == 1) { + info->max_h_samp_factor = 1; + info->max_v_samp_factor = 1; + } else { + info->max_h_samp_factor = srcinfo->max_v_samp_factor; + info->max_v_samp_factor = srcinfo->max_h_samp_factor; + } + break; + default: + info->output_width = srcinfo->image_width; + info->output_height = srcinfo->image_height; + if (info->num_components == 1) { + info->max_h_samp_factor = 1; + info->max_v_samp_factor = 1; + } else { + info->max_h_samp_factor = srcinfo->max_h_samp_factor; + info->max_v_samp_factor = srcinfo->max_v_samp_factor; + } + break; + } + + /* If cropping has been requested, compute the crop area's position and + * dimensions, ensuring that its upper left corner falls at an iMCU boundary. + */ + if (info->crop) { + /* Insert default values for unset crop parameters */ + if (info->crop_xoffset_set == JCROP_UNSET) + info->crop_xoffset = 0; /* default to +0 */ + if (info->crop_yoffset_set == JCROP_UNSET) + info->crop_yoffset = 0; /* default to +0 */ + if (info->crop_xoffset >= info->output_width || + info->crop_yoffset >= info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + if (info->crop_width_set == JCROP_UNSET) + info->crop_width = info->output_width - info->crop_xoffset; + if (info->crop_height_set == JCROP_UNSET) + info->crop_height = info->output_height - info->crop_yoffset; + /* Ensure parameters are valid */ + if (info->crop_width <= 0 || info->crop_width > info->output_width || + info->crop_height <= 0 || info->crop_height > info->output_height || + info->crop_xoffset > info->output_width - info->crop_width || + info->crop_yoffset > info->output_height - info->crop_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + /* Convert negative crop offsets into regular offsets */ + if (info->crop_xoffset_set == JCROP_NEG) + xoffset = info->output_width - info->crop_width - info->crop_xoffset; + else + xoffset = info->crop_xoffset; + if (info->crop_yoffset_set == JCROP_NEG) + yoffset = info->output_height - info->crop_height - info->crop_yoffset; + else + yoffset = info->crop_yoffset; + /* Now adjust so that upper left corner falls at an iMCU boundary */ + info->output_width = + info->crop_width + (xoffset % (info->max_h_samp_factor * DCTSIZE)); + info->output_height = + info->crop_height + (yoffset % (info->max_v_samp_factor * DCTSIZE)); + /* Save x/y offsets measured in iMCUs */ + info->x_crop_offset = xoffset / (info->max_h_samp_factor * DCTSIZE); + info->y_crop_offset = yoffset / (info->max_v_samp_factor * DCTSIZE); + } else { + info->x_crop_offset = 0; + info->y_crop_offset = 0; + } + /* Figure out whether we need workspace arrays, + * and if so whether they are transposed relative to the source. + */ + need_workspace = FALSE; + transpose_it = FALSE; switch (info->transform) { case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + need_workspace = TRUE; + /* No workspace needed if neither cropping nor transforming */ + break; case JXFORM_FLIP_H: - /* Don't need a workspace array */ + if (info->trim) + trim_right_edge(info, srcinfo->image_width); + if (info->y_crop_offset != 0) + need_workspace = TRUE; + /* do_flip_h_no_crop doesn't need a workspace array */ break; case JXFORM_FLIP_V: - case JXFORM_ROT_180: - /* Need workspace arrays having same dimensions as source image. - * Note that we allocate arrays padded out to the next iMCU boundary, - * so that transform routines need not worry about missing edge blocks. - */ - coef_arrays = (jvirt_barray_ptr *) - (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, - SIZEOF(jvirt_barray_ptr) * info->num_components); - for (ci = 0; ci < info->num_components; ci++) { - compptr = srcinfo->comp_info + ci; - coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) - ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) compptr->v_samp_factor); - } + if (info->trim) + trim_bottom_edge(info, srcinfo->image_height); + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; break; case JXFORM_TRANSPOSE: + /* transpose does NOT have to trim anything */ + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; case JXFORM_TRANSVERSE: + if (info->trim) { + trim_right_edge(info, srcinfo->image_height); + trim_bottom_edge(info, srcinfo->image_width); + } + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; case JXFORM_ROT_90: + if (info->trim) + trim_right_edge(info, srcinfo->image_height); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_180: + if (info->trim) { + trim_right_edge(info, srcinfo->image_width); + trim_bottom_edge(info, srcinfo->image_height); + } + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; case JXFORM_ROT_270: - /* Need workspace arrays having transposed dimensions. - * Note that we allocate arrays padded out to the next iMCU boundary, - * so that transform routines need not worry about missing edge blocks. - */ + if (info->trim) + trim_bottom_edge(info, srcinfo->image_width); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + } + + /* Allocate workspace if needed. + * Note that we allocate arrays padded out to the next iMCU boundary, + * so that transform routines need not worry about missing edge blocks. + */ + if (need_workspace) { coef_arrays = (jvirt_barray_ptr *) (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, - SIZEOF(jvirt_barray_ptr) * info->num_components); + SIZEOF(jvirt_barray_ptr) * info->num_components); + width_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_width, + (long) (info->max_h_samp_factor * DCTSIZE)); + height_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_height, + (long) (info->max_v_samp_factor * DCTSIZE)); for (ci = 0; ci < info->num_components; ci++) { compptr = srcinfo->comp_info + ci; + if (info->num_components == 1) { + /* we're going to force samp factors to 1x1 in this case */ + h_samp_factor = v_samp_factor = 1; + } else if (transpose_it) { + h_samp_factor = compptr->v_samp_factor; + v_samp_factor = compptr->h_samp_factor; + } else { + h_samp_factor = compptr->h_samp_factor; + v_samp_factor = compptr->v_samp_factor; + } + width_in_blocks = width_in_iMCUs * h_samp_factor; + height_in_blocks = height_in_iMCUs * v_samp_factor; coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) compptr->h_samp_factor); + width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); } - break; } + info->workspace_coef_arrays = coef_arrays; } @@ -642,14 +1062,8 @@ int tblno, i, j, ci, itemp; jpeg_component_info *compptr; JQUANT_TBL *qtblptr; - JDIMENSION dtemp; UINT16 qtemp; - /* Transpose basic image dimensions */ - dtemp = dstinfo->image_width; - dstinfo->image_width = dstinfo->image_height; - dstinfo->image_height = dtemp; - /* Transpose sampling factors */ for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; @@ -674,46 +1088,159 @@ } -/* Trim off any partial iMCUs on the indicated destination edge */ +/* Adjust Exif image parameters. + * + * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. + */ LOCAL(void) -trim_right_edge (j_compress_ptr dstinfo) +adjust_exif_parameters (JOCTET FAR * data, unsigned int length, + JDIMENSION new_width, JDIMENSION new_height) { - int ci, max_h_samp_factor; - JDIMENSION MCU_cols; + boolean is_motorola; /* Flag for byte order */ + unsigned int number_of_tags, tagnum; + unsigned int firstoffset, offset; + JDIMENSION new_value; - /* We have to compute max_h_samp_factor ourselves, - * because it hasn't been set yet in the destination - * (and we don't want to use the source's value). - */ - max_h_samp_factor = 1; - for (ci = 0; ci < dstinfo->num_components; ci++) { - int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor; - max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor); + if (length < 12) return; /* Length of an IFD entry */ + + /* Discover byte order */ + if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) + is_motorola = FALSE; + else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) + is_motorola = TRUE; + else + return; + + /* Check Tag Mark */ + if (is_motorola) { + if (GETJOCTET(data[2]) != 0) return; + if (GETJOCTET(data[3]) != 0x2A) return; + } else { + if (GETJOCTET(data[3]) != 0) return; + if (GETJOCTET(data[2]) != 0x2A) return; } - MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE); - if (MCU_cols > 0) /* can't trim to 0 pixels */ - dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE); -} -LOCAL(void) -trim_bottom_edge (j_compress_ptr dstinfo) -{ - int ci, max_v_samp_factor; - JDIMENSION MCU_rows; + /* Get first IFD offset (offset to IFD0) */ + if (is_motorola) { + if (GETJOCTET(data[4]) != 0) return; + if (GETJOCTET(data[5]) != 0) return; + firstoffset = GETJOCTET(data[6]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[7]); + } else { + if (GETJOCTET(data[7]) != 0) return; + if (GETJOCTET(data[6]) != 0) return; + firstoffset = GETJOCTET(data[5]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[4]); + } + if (firstoffset > length - 2) return; /* check end of data segment */ - /* We have to compute max_v_samp_factor ourselves, - * because it hasn't been set yet in the destination - * (and we don't want to use the source's value). - */ - max_v_samp_factor = 1; - for (ci = 0; ci < dstinfo->num_components; ci++) { - int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor; - max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor); + /* Get the number of directory entries contained in this IFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[firstoffset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset+1]); + } else { + number_of_tags = GETJOCTET(data[firstoffset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset]); } - MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE); - if (MCU_rows > 0) /* can't trim to 0 pixels */ - dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE); + if (number_of_tags == 0) return; + firstoffset += 2; + + /* Search for ExifSubIFD offset Tag in IFD0 */ + for (;;) { + if (firstoffset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[firstoffset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset+1]); + } else { + tagnum = GETJOCTET(data[firstoffset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset]); + } + if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ + if (--number_of_tags == 0) return; + firstoffset += 12; + } + + /* Get the ExifSubIFD offset */ + if (is_motorola) { + if (GETJOCTET(data[firstoffset+8]) != 0) return; + if (GETJOCTET(data[firstoffset+9]) != 0) return; + offset = GETJOCTET(data[firstoffset+10]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+11]); + } else { + if (GETJOCTET(data[firstoffset+11]) != 0) return; + if (GETJOCTET(data[firstoffset+10]) != 0) return; + offset = GETJOCTET(data[firstoffset+9]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+8]); + } + if (offset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this SubIFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[offset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset+1]); + } else { + number_of_tags = GETJOCTET(data[offset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset]); + } + if (number_of_tags < 2) return; + offset += 2; + + /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ + do { + if (offset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[offset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset+1]); + } else { + tagnum = GETJOCTET(data[offset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset]); + } + if (tagnum == 0xA002 || tagnum == 0xA003) { + if (tagnum == 0xA002) + new_value = new_width; /* ExifImageWidth Tag */ + else + new_value = new_height; /* ExifImageHeight Tag */ + if (is_motorola) { + data[offset+2] = 0; /* Format = unsigned long (4 octets) */ + data[offset+3] = 4; + data[offset+4] = 0; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 1; + data[offset+8] = 0; + data[offset+9] = 0; + data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+11] = (JOCTET)(new_value & 0xFF); + } else { + data[offset+2] = 4; /* Format = unsigned long (4 octets) */ + data[offset+3] = 0; + data[offset+4] = 1; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 0; + data[offset+8] = (JOCTET)(new_value & 0xFF); + data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+10] = 0; + data[offset+11] = 0; + } + } + offset += 12; + } while (--number_of_tags); } @@ -736,18 +1263,22 @@ { /* If force-to-grayscale is requested, adjust destination parameters */ if (info->force_grayscale) { - /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed - * properly. Among other things, the target h_samp_factor & v_samp_factor - * will get set to 1, which typically won't match the source. - * In fact we do this even if the source is already grayscale; that - * provides an easy way of coercing a grayscale JPEG with funny sampling - * factors to the customary 1,1. (Some decoders fail on other factors.) + /* First, ensure we have YCbCr or grayscale data, and that the source's + * Y channel is full resolution. (No reasonable person would make Y + * be less than full resolution, so actually coping with that case + * isn't worth extra code space. But we check it to avoid crashing.) */ - if ((dstinfo->jpeg_color_space == JCS_YCbCr && - dstinfo->num_components == 3) || - (dstinfo->jpeg_color_space == JCS_GRAYSCALE && - dstinfo->num_components == 1)) { - /* We have to preserve the source's quantization table number. */ + if (((dstinfo->jpeg_color_space == JCS_YCbCr && + dstinfo->num_components == 3) || + (dstinfo->jpeg_color_space == JCS_GRAYSCALE && + dstinfo->num_components == 1)) && + srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && + srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { + /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed + * properly. Among other things, it sets the target h_samp_factor & + * v_samp_factor to 1, which typically won't match the source. + * We have to preserve the source's quantization table number, however. + */ int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; @@ -755,50 +1286,52 @@ /* Sorry, can't do it */ ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); } + } else if (info->num_components == 1) { + /* For a single-component source, we force the destination sampling factors + * to 1x1, with or without force_grayscale. This is useful because some + * decoders choke on grayscale images with other sampling factors. + */ + dstinfo->comp_info[0].h_samp_factor = 1; + dstinfo->comp_info[0].v_samp_factor = 1; } - /* Correct the destination's image dimensions etc if necessary */ + /* Correct the destination's image dimensions as necessary + * for crop and rotate/flip operations. + */ + dstinfo->image_width = info->output_width; + dstinfo->image_height = info->output_height; + + /* Transpose destination image parameters */ switch (info->transform) { - case JXFORM_NONE: - /* Nothing to do */ - break; - case JXFORM_FLIP_H: - if (info->trim) - trim_right_edge(dstinfo); - break; - case JXFORM_FLIP_V: - if (info->trim) - trim_bottom_edge(dstinfo); - break; case JXFORM_TRANSPOSE: - transpose_critical_parameters(dstinfo); - /* transpose does NOT have to trim anything */ - break; case JXFORM_TRANSVERSE: - transpose_critical_parameters(dstinfo); - if (info->trim) { - trim_right_edge(dstinfo); - trim_bottom_edge(dstinfo); - } - break; case JXFORM_ROT_90: - transpose_critical_parameters(dstinfo); - if (info->trim) - trim_right_edge(dstinfo); - break; - case JXFORM_ROT_180: - if (info->trim) { - trim_right_edge(dstinfo); - trim_bottom_edge(dstinfo); - } - break; case JXFORM_ROT_270: transpose_critical_parameters(dstinfo); - if (info->trim) - trim_bottom_edge(dstinfo); break; } + /* Adjust Exif properties */ + if (srcinfo->marker_list != NULL && + srcinfo->marker_list->marker == JPEG_APP0+1 && + srcinfo->marker_list->data_length >= 6 && + GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && + GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && + GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && + GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && + GETJOCTET(srcinfo->marker_list->data[4]) == 0 && + GETJOCTET(srcinfo->marker_list->data[5]) == 0) { + /* Suppress output of JFIF marker */ + dstinfo->write_JFIF_header = FALSE; + /* Adjust Exif image parameters */ + if (dstinfo->image_width != srcinfo->image_width || + dstinfo->image_height != srcinfo->image_height) + /* Align data segment to start of TIFF structure for parsing */ + adjust_exif_parameters(srcinfo->marker_list->data + 6, + srcinfo->marker_list->data_length - 6, + dstinfo->image_width, dstinfo->image_height); + } + /* Return the appropriate output data set */ if (info->workspace_coef_arrays != NULL) return info->workspace_coef_arrays; @@ -816,36 +1349,53 @@ */ GLOBAL(void) -jtransform_execute_transformation (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info) +jtransform_execute_transform (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) { jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; + /* Note: conditions tested here should match those in switch statement + * in jtransform_request_workspace() + */ switch (info->transform) { case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; case JXFORM_FLIP_H: - do_flip_h(srcinfo, dstinfo, src_coef_arrays); + if (info->y_crop_offset != 0) + do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays); break; case JXFORM_FLIP_V: - do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); + do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; case JXFORM_TRANSPOSE: - do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); + do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; case JXFORM_TRANSVERSE: - do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); + do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; case JXFORM_ROT_90: - do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); + do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; case JXFORM_ROT_180: - do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); + do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; case JXFORM_ROT_270: - do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); + do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); break; } } --- jpeg-6b/jerror.h~libjpeg6bb-5 +++ jpeg-6b/jerror.h @@ -45,6 +45,7 @@ JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") --- jpeg-6b/transupp.h~libjpeg6bb-5 +++ jpeg-6b/transupp.h @@ -1,7 +1,7 @@ /* * transupp.h * - * Copyright (C) 1997, Thomas G. Lane. + * Copyright (C) 1997-2001, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * @@ -22,32 +22,6 @@ #define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ #endif -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jtransform_request_workspace jTrRequest -#define jtransform_adjust_parameters jTrAdjust -#define jtransform_execute_transformation jTrExec -#define jcopy_markers_setup jCMrkSetup -#define jcopy_markers_execute jCMrkExec -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * Codes for supported types of image transformations. - */ - -typedef enum { - JXFORM_NONE, /* no transformation */ - JXFORM_FLIP_H, /* horizontal flip */ - JXFORM_FLIP_V, /* vertical flip */ - JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ - JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ - JXFORM_ROT_90, /* 90-degree clockwise rotation */ - JXFORM_ROT_180, /* 180-degree rotation */ - JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ -} JXFORM_CODE; - /* * Although rotating and flipping data expressed as DCT coefficients is not * hard, there is an asymmetry in the JPEG format specification for images @@ -75,6 +49,19 @@ * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim * followed by -rot 180 -trim trims both edges.) * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the JPEG format: the upper + * left corner of the selected region must fall on an iMCU boundary. If this + * does not hold for the given crop parameters, we silently move the upper left + * corner up and/or left to make it so, simultaneously increasing the region + * dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * + * If both crop and a rotate/flip transform are requested, the crop is applied + * last --- that is, the crop region is specified in terms of the destination + * image. + * * We also offer a "force to grayscale" option, which simply discards the * chrominance channels of a YCbCr image. This is lossless in the sense that * the luminance channel is preserved exactly. It's not the same kind of @@ -83,20 +70,87 @@ * be aware of the option to know how many components to work on. */ + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive, or negative. (Negative width or height makes no sense, though.) + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + typedef struct { /* Options: set by caller */ JXFORM_CODE transform; /* image transform operator */ boolean trim; /* if TRUE, trim partial MCUs as needed */ boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop source image */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ /* Internal workspace: caller should not touch these */ int num_components; /* # of components in workspace */ jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + int max_h_samp_factor; /* destination iMCU size */ + int max_v_samp_factor; } jpeg_transform_info; #if TRANSFORMS_SUPPORTED +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); /* Request any required workspace */ EXTERN(void) jtransform_request_workspace JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); @@ -106,11 +160,18 @@ jvirt_barray_ptr *src_coef_arrays, jpeg_transform_info *info)); /* Execute the actual transformation, if any */ -EXTERN(void) jtransform_execute_transformation +EXTERN(void) jtransform_execute_transform JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jpeg_transform_info *info)); +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + #endif /* TRANSFORMS_SUPPORTED */ --- jpeg-6b/config.guess~libjpeg6bb-5 +++ jpeg-6b/config.guess @@ -1,4 +1,10 @@ #! /bin/sh +# autotools-dev hack (, Wed, 14 Nov 2001 10:13:10 +0100) +if [ -x /usr/share/misc/config.guess ]; then + /usr/share/misc/config.guess $* + exit $? +fi + # Attempt to guess a canonical system name. # Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. # --- jpeg-6b/config.sub~libjpeg6bb-5 +++ jpeg-6b/config.sub @@ -1,4 +1,10 @@ #! /bin/sh +# autotools-dev hack (, Wed, 14 Nov 2001 10:13:10 +0100) +if [ -x /usr/share/misc/config.sub ]; then + /usr/share/misc/config.sub $* + exit $? +fi + # Configuration validation subroutine script, version 1.1. # Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. # This file is (in principle) common to ALL GNU software. --- /dev/null +++ jpeg-6b/libtool.cfg @@ -0,0 +1,224 @@ +# libtool.cfg - Libtool configuration file. +# Generated automatically by ltconfig (GNU libtool 1.3.3 (1.385.2.181 1999/07/02 15:49:11)) +# Libtool was configured as follows, on host yellowpig: +# +# CC="old_CC" CFLAGS="old_CFLAGS" CPPFLAGS="old_CPPFLAGS" \ +# LD="old_LD" LDFLAGS="old_LDFLAGS" LIBS="old_LIBS" \ +# NM="old_NM" RANLIB="old_RANLIB" LN_S="old_LN_S" \ +# DLLTOOL="old_DLLTOOL" OBJDUMP="old_OBJDUMP" AS="old_AS" \ +# ./ltconfig.new ./ltmain.sh.new i386-gnu +# +# Compiler and other test output produced by ltconfig.new, useful for +# debugging ltconfig.new, is in ./config.log if it exists. + +# The version of ltconfig.new that generated this script. +LTCONFIG_VERSION=1.3.3 + +# Shell to use when invoking shell scripts. +SHELL=/bin/sh + +# Whether or not to build shared libraries. +build_libtool_libs=yes + +# Whether or not to build static libraries. +build_old_libs=yes + +# Whether or not to optimize for fast installation. +fast_install=yes + +# The host system. +host_alias=i386-gnu +host=i386-pc-gnu + +# An echo program that does not interpret backslashes. +echo=echo + +# The archiver. +AR=ar + +# The default C compiler. +CC=gcc + +# The linker used to build libraries. +LD=/usr/bin/ld + +# Whether we need hard or soft links. +LN_S=ln -s + +# A BSD-compatible nm program. +NM=/usr/bin/nm -B + +# Used on cygwin: DLL creation program. +DLLTOOL="dlltool" + +# Used on cygwin: object dumper. +OBJDUMP="objdump" + +# Used on cygwin: assembler. +AS="as" + +# The name of the directory that contains temporary libtool files. +objdir=.libs + +# How to create reloadable object files. +reload_flag= -r +reload_cmds=$LD$reload_flag -o $output$reload_objs + +# How to pass a linker flag through the compiler. +wl=-Wl, + +# Object file suffix (normally "o"). +objext="o" + +# Old archive suffix (normally "a"). +libext="a" + +# Executable file suffix (normally ""). +exeext="" + +# Additional compiler flags for building library objects. +pic_flag= -fPIC + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=yes + +# Can we write directly to a .lo ? +compiler_o_lo=yes + +# Must we lock files when doing compilation ? +need_locks=no + +# Do we need the lib prefix for modules? +need_lib_prefix=no + +# Do we need a version for libraries? +need_version=no + +# Whether dlopen is supported. +dlopen=unknown + +# Whether dlopen of programs is supported. +dlopen_self=unknown + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=unknown + +# Compiler flag to prevent dynamic linking. +link_static_flag=-static + +# Compiler flag to turn off builtin functions. +no_builtin_flag= -fno-builtin -fno-rtti -fno-exceptions + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=${wl}--export-dynamic + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=${wl}--whole-archive$convenience ${wl}--no-whole-archive + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec= + +# Library versioning type. +version_type=linux + +# Format of library name prefix. +libname_spec=lib$name + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so + +# The coded name of the library, if different from the real name. +soname_spec=${libname}${release}.so$major + +# Commands used to build and install an old-style archive. +RANLIB=ranlib +old_archive_cmds=$AR cru $oldlib$oldobjs~$RANLIB $oldlib +old_postinstall_cmds=$RANLIB $oldlib~chmod 644 $oldlib +old_postuninstall_cmds= + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds= + +# Commands used to build and install a shared archive. +archive_cmds=$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib +archive_expsym_cmds=$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib +postinstall_cmds= +postuninstall_cmds= + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=unknown + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd= + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag= + +# Flag that forces no undefined symbols. +no_undefined_flag= + +# Commands used to finish a libtool library installation in a directory. +finish_cmds= + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval= + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=sed -n -e 's/^.*[ ]\([ABCDGISTW]\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=sed -n -e 's/^. .* \(.*\)$/extern char \1;/p' + +# This is the shared library runtime path variable. +runpath_var=LD_RUN_PATH + +# This is the shared library path variable. +shlibpath_var=LD_LIBRARY_PATH + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=unknown + +# How to hardcode a shared library path into an executable. +hardcode_action=immediate + +# Flag to hardcode $libdir into a binary during linking. +# This must work even if $libdir does not exist. +hardcode_libdir_flag_spec=${wl}--rpath ${wl}$libdir + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator= + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=no + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=no + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=unsupported + +# Compile-time system search path for libraries +sys_lib_search_path_spec=/lib /usr/lib /usr/local/lib + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=/lib /usr/lib + +# Fix the shell variable $srcfile for the compiler. +fix_srcfile_path="" + +# Set to yes if exported symbols are required. +always_export_symbols=no + +# The commands to list exported symbols. +export_symbols_cmds=$NM $libobjs $convenience | $global_symbol_pipe | sed 's/.* //' | sort | uniq > $export_symbols + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=_GLOBAL_OFFSET_TABLE_ + +# Symbols that must always be exported. +include_expsyms= + --- /dev/null +++ jpeg-6b/ltmain.new.sh @@ -0,0 +1,3975 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun ltconfig. +# +# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + echo "$modename: not configured to build any kind of library" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +# Parse our command line options once, thoroughly. +while test $# -gt 0 +do + arg="$1" + shift + + case "$arg" in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case "$prev" in + execute_dlfiles) + eval "$prev=\"\$$prev \$arg\"" + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case "$arg" in + --help) + show_help=yes + ;; + + --version) + echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + exit 0 + ;; + + --config) + sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 + exit 0 + ;; + + --debug) + echo "$progname: enabling shell trace mode" + set -x + ;; + + --dry-run | -n) + run=: + ;; + + --features) + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + exit 0 + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --quiet | --silent) + show=: + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 +fi + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + case "$nonopt" in + *cc | *++ | gcc* | *-gcc*) + mode=link + for arg + do + case "$arg" in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case "$mode" in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + lastarg= + srcfile="$nonopt" + suppress_output= + + user_target=no + for arg + do + # Accept any command-line options. + case "$arg" in + -o) + if test "$user_target" != "no"; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit 1 + fi + user_target=next + ;; + + -static) + build_old_libs=yes + continue + ;; + esac + + case "$user_target" in + next) + # The next one is the -o target name + user_target=yes + continue + ;; + yes) + # We got the output file + user_target=set + libobj="$arg" + continue + ;; + esac + + # Accept the current argument as the source file. + lastarg="$srcfile" + srcfile="$arg" + + # Aesthetically quote the previous argument. + + # Backslashify any backslashes, double quotes, and dollar signs. + # These are the only characters that are still specially + # interpreted inside of double-quoted scrings. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly in scan + # sets, so we specify it separately. + case "$lastarg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + lastarg="\"$lastarg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + done + + case "$user_target" in + set) + ;; + no) + # Get the name of the library object. + libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + *) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit 1 + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSfmso]' + case "$libobj" in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case "$libobj" in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit 1 + ;; + esac + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $libobj" + else + removelist="$libobj" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit 1" 1 2 15 + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit 1" 1 2 15 + else + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until ln "$0" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + echo $srcfile > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $pic_flag -DPIC $srcfile" + if test "$build_old_libs" = yes; then + lo_libobj="$libobj" + dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$libobj"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + + if test -d "$dir"; then + $show "$rm $libobj" + $run $rm $libobj + else + $show "$mkdir $dir" + $run $mkdir $dir + status=$? + if test $status -ne 0 && test ! -d $dir; then + exit $status + fi + fi + fi + if test "$compiler_o_lo" = yes; then + output_obj="$libobj" + command="$command -o $output_obj" + elif test "$compiler_c_o" = yes; then + output_obj="$obj" + command="$command -o $output_obj" + fi + + $run $rm "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed, then go on to compile the next one + if test x"$output_obj" != x"$libobj"; then + $show "$mv $output_obj $libobj" + if $run $mv $output_obj $libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # If we have no pic_flag, then copy the object into place and finish. + if test -z "$pic_flag" && test "$build_old_libs" = yes; then + # Rename the .lo from within objdir to obj + if test -f $obj; then + $show $rm $obj + $run $rm $obj + fi + + $show "$mv $libobj $obj" + if $run $mv $libobj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + + # Now arrange that obj and lo_libobj become the same file + $show "$LN_S $obj $lo_libobj" + if $run $LN_S $obj $lo_libobj; then + exit 0 + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Allow error messages only from the first compilation. + suppress_output=' >/dev/null 2>&1' + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + command="$base_compile $srcfile" + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + output_obj="$obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + $run $rm "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed + if test x"$output_obj" != x"$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Create an invalid libtool object if no PIC, so that we do not + # accidentally link it into a program. + if test "$build_libtool_libs" != yes; then + $show "echo timestamp > $libobj" + $run eval "echo timestamp > \$libobj" || exit $? + else + # Move the .lo from within objdir + $show "$mv $libobj $lo_libobj" + if $run $mv $libobj $lo_libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + fi + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $rm "$lockfile" + fi + + exit 0 + ;; + + # libtool link mode + link) + modename="$modename: link" + C_compiler="$CC" # save it, to compile generated C sources + CC="$nonopt" + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invokation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (!dll) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + fi + build_libtool_libs=no + build_old_libs=yes + prefer_static_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test $# -gt 0; do + arg="$1" + shift + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case "$prev" in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case "$prev" in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case "$arg" in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit 1 + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case "$arg" in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi + + prevarg="$arg" + + case "$arg" in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: not more than one -exported-symbols argument allowed" + exit 1 + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case "$dir" in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + absdir="$dir" + fi + dir="$absdir" + ;; + esac + case " $deplibs " in + *" $arg "*) ;; + *) deplibs="$deplibs $arg";; + esac + case " $lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir";; + esac + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + dllsearchdir=`cd "$dir" && pwd || echo "$dir"` + case ":$dllsearchpath:" in + ::) dllsearchpath="$dllsearchdir";; + *":$dllsearchdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dllsearchdir";; + esac + ;; + esac + ;; + + -l*) + if test "$arg" = "-lc"; then + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) + # These systems don't actually have c library (as such) + continue + ;; + esac + elif test "$arg" = "-lm"; then + case "$host" in + *-*-cygwin* | *-*-beos*) + # These systems don't actually have math library (as such) + continue + ;; + esac + fi + deplibs="$deplibs $arg" + ;; + + -module) + module=yes + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -o) prev=output ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case "$dir" in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # If we have no pic_flag, then this is the same as -all-static. + if test -z "$pic_flag" && test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + ;; + + *.o | *.obj | *.a | *.lib) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A library object. + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` + prev= + fi + libobjs="$libobjs $arg" + ;; + + *.la) + # A libtool-controlled library. + + dlname= + libdir= + library_names= + old_library= + + # Check to see that this really is a libtool archive. + if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 + exit 1 + fi + + # If the library was installed with an old release of libtool, + # it will not redefine variable installed. + installed=yes + + # Read the .la file + # If there is no directory component, then add one. + case "$arg" in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 + exit 1 + fi + + # Find the relevant object directory and library name. + name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` + + if test "X$installed" = Xyes; then + dir="$libdir" + else + dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$arg"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + fi + + if test -n "$dependency_libs"; then + # Extract -R and -L from dependency_libs + temp_deplibs= + for deplib in $dependency_libs; do + case "$deplib" in + -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + case " $rpath $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + -L*) case "$compile_command $temp_deplibs " in + *" $deplib "*) ;; + *) temp_deplibs="$temp_deplibs $deplib";; + esac + temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'` + case " $lib_search_path " in + *" $temp_dir "*) ;; + *) lib_search_path="$lib_search_path $temp_dir";; + esac + ;; + *) temp_deplibs="$temp_deplibs $deplib";; + esac + done + dependency_libs="$temp_deplibs" + fi + + if test -z "$libdir"; then + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$deplibs$dependency_libs" + compile_command="$compile_command $dir/$old_library$dependency_libs" + finalize_command="$finalize_command $dir/$old_library$dependency_libs" + continue + fi + + # This library was specified with -dlopen. + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking statically, + # we need to preload. + prev=dlprefiles + else + # We should not create a dependency on this library, but we + # may need any libraries it requires. + compile_command="$compile_command$dependency_libs" + finalize_command="$finalize_command$dependency_libs" + prev= + continue + fi + fi + + # The library was specified with -dlpreopen. + if test "$prev" = dlprefiles; then + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + dlprefiles="$dlprefiles $dir/$old_library" + else + dlprefiles="$dlprefiles $dir/$linklib" + fi + prev= + fi + + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + link_against_libtool_libs="$link_against_libtool_libs $arg" + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + + # We need an absolute path. + case "$dir" in + [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + absdir="$dir" + fi + ;; + esac + + # This is the magic to use -rpath. + # Skip directories that are in the system default run-time + # search path, unless they have been requested with -R. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + + lib_linked=yes + case "$hardcode_action" in + immediate | unsupported) + if test "$hardcode_direct" = no; then + compile_command="$compile_command $dir/$linklib" + deplibs="$deplibs $dir/$linklib" + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + dllsearchdir=`cd "$dir" && pwd || echo "$dir"` + if test -n "$dllsearchpath"; then + dllsearchpath="$dllsearchpath:$dllsearchdir" + else + dllsearchpath="$dllsearchdir" + fi + ;; + esac + elif test "$hardcode_minus_L" = no; then + case "$host" in + *-*-sunos*) + compile_shlibpath="$compile_shlibpath$dir:" + ;; + esac + case "$compile_command " in + *" -L$dir "*) ;; + *) compile_command="$compile_command -L$dir";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -L$dir -l$name" + elif test "$hardcode_shlibpath_var" = no; then + case ":$compile_shlibpath:" in + *":$dir:"*) ;; + *) compile_shlibpath="$compile_shlibpath$dir:";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -l$name" + else + lib_linked=no + fi + ;; + + relink) + if test "$hardcode_direct" = yes; then + compile_command="$compile_command $absdir/$linklib" + deplibs="$deplibs $absdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + case "$compile_command " in + *" -L$absdir "*) ;; + *) compile_command="$compile_command -L$absdir";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -L$absdir -l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case ":$compile_shlibpath:" in + *":$absdir:"*) ;; + *) compile_shlibpath="$compile_shlibpath$absdir:";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -l$name" + else + lib_linked=no + fi + ;; + + *) + lib_linked=no + ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + finalize_command="$finalize_command $libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + case "$finalize_command " in + *" -L$libdir "*) ;; + *) finalize_command="$finalize_command -L$libdir";; + esac + finalize_command="$finalize_command -l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case ":$finalize_shlibpath:" in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:";; + esac + finalize_command="$finalize_command -l$name" + else + # We cannot seem to hardcode it, guess we'll fake it. + case "$finalize_command " in + *" -L$dir "*) ;; + *) finalize_command="$finalize_command -L$libdir";; + esac + finalize_command="$finalize_command -l$name" + fi + else + # Transform directly to old archives if we don't build new libraries. + if test -n "$pic_flag" && test -z "$old_library"; then + $echo "$modename: cannot find static library for \`$arg'" 1>&2 + exit 1 + fi + + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_command="$compile_command $dir/$linklib" + finalize_command="$finalize_command $dir/$linklib" + else + case "$compile_command " in + *" -L$dir "*) ;; + *) compile_command="$compile_command -L$dir";; + esac + compile_command="$compile_command -l$name" + case "$finalize_command " in + *" -L$dir "*) ;; + *) finalize_command="$finalize_command -L$dir";; + esac + finalize_command="$finalize_command -l$name" + fi + fi + + # Add in any libraries that this one depends upon. + compile_command="$compile_command$dependency_libs" + finalize_command="$finalize_command$dependency_libs" + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + ;; + esac + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + case "$output" in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *.a | *.lib) + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 + exit 1 + fi + + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + ;; + + *.la) + # Make sure we only generate libraries of the form `libNAME.la'. + case "$outputname" in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + + if test -n "$objs"; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 + exit 1 + fi + + # How the heck are we supposed to write a wrapper for a shared library? + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 + exit 1 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test $# -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + libext=al + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + dependency_libs="$deplibs" + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + current="$2" + revision="$3" + age="$4" + + # Check that each of the things are valid numbers. + case "$current" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case "$revision" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case "$age" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + if test $age -gt $current; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case "$version_type" in + none) ;; + + irix) + major=`expr $current - $age + 1` + versuffix="$major.$revision" + verstring="sgi$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test $loop != 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="sgi$major.$iface:$verstring" + done + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test $loop != 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + windows) + # Like Linux, but with '-' rather than '.', since we only + # want one extension on Windows 95. + major=`expr $current - $age` + versuffix="-$major-$age-$revision" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + verstring="0.0" + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + dependency_libs="$deplibs" + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *) + # Add libc to deplibs on all other systems. + deplibs="$deplibs -lc" + ;; + esac + fi + + # Create the output directory, or remove our outputs if we need to. + if test -d $output_objdir; then + $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" + $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* + else + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + if test "$build_libtool_libs" = yes; then + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case "$deplibs_check_method" in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behaviour. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | sed 's/.* -> //'` + case "$potliblink" in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | sed 10q \ + | egrep "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | + grep . >/dev/null; then + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + echo "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Get the real and link names of the library. + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Ensure that we have .o objects for linkers which dislike .lo + # (e.g. aix) incase we are running --disable-static + for obj in $libobjs; do + oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"` + if test ! -f $oldobj; then + $show "${LN_S} $obj $oldobj" + $run ${LN_S} $obj $oldobj || exit $? + fi + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + eval cmds=\"$export_symbols_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case "$xlib" in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linkopts="$linkopts $flag" + fi + + # Do each of the archive commands. + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + *.lo | *.o | *.obj) + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 + exit 1 + fi + + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case "$output" in + *.lo) + if test -n "$objs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit 1 + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case "$xlib" in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + # Create the old-style object. + reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" + + output="$obj" + eval cmds=\"$reload_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + $show "echo timestamp > $libobj" + $run eval "echo timestamp > $libobj" || exit $? + exit 0 + fi + + if test -n "$pic_flag"; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + eval cmds=\"$reload_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + else + # Just create a symlink. + $show $rm $libobj + $run $rm $libobj + $show "$LN_S $obj $libobj" + $run $LN_S $obj $libobj || exit $? + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + ;; + + # Anything else should be a program. + *) + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$compile_rpath " in + *" $libdir "*) ;; + *) compile_rpath="$compile_rpath $libdir" ;; + esac + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + + # Create the binary in the object directory, then wrap it. + if test ! -d $output_objdir; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case "$dlsyms" in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$output.exp" + $run $rm $export_symbols + $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`echo "$arg" | sed -e 's%^.*/%%'` + $run eval 'echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{\ +" + + sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ + -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ + < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr_t) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case "$host" in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit 1 + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case "$dir" in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case "$0" in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`echo $output|sed 's,.exe$,,'` ;; + esac + $rm $output + trap "$rm $output; exit 1" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + link_against_libtool_libs='$link_against_libtool_libs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + echo >> $output "\ + program=lt-'$outputname' + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if (cd \"\$thisdir\" && eval \$relink_command); then : + else + $rm \"\$progdir/\$file\" + exit 1 + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + echo >> $output "\ + program='$outputname$exeext' + progdir=\"\$thisdir/$objdir\" +" + fi + + echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + *-*-cygwin* | *-*-mingw | *-*-os2*) + # win32 systems need to use the prog path for dll + # lookup to work + $echo >> $output "\ + exec \$progdir\\\\\$program \${1+\"\$@\"} +" + ;; + *) + $echo >> $output "\ + # Export the path to the program. + PATH=\"\$progdir:\$PATH\" + export PATH + + exec \$program \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit 1 + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" + chmod +x $output + fi + exit 0 + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" + status=$? + if test $status -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case "$xlib" in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + eval cmds=\"$old_archive_from_new_cmds\" + else + # Ensure that we have .o objects in place incase we decided + # not to build a shared library, and have fallen back to building + # static libs even though --disable-static was passed! + for oldobj in $oldobjs; do + if test ! -f $oldobj; then + obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"` + $show "${LN_S} $obj $oldobj" + $run ${LN_S} $obj $oldobj || exit $? + fi + done + + eval cmds=\"$old_archive_cmds\" + fi + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case "$output" in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + if test -n "$xrpath"; then + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + done + dependency_libs="$temp_xrpath $dependency_libs" + fi + + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + fi + $rm $output + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$dlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Directory that this library needs to be installed in: +libdir='$install_libdir'\ +" + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? + ;; + esac + exit 0 + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case "$arg" in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit 1 + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test $# -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + fi + case "$destdir" in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case "$file" in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case "$file" in + *.a | *.lib) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + library_names= + old_library= + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + # Install the shared library and build the symlinks. + $show "$install_prog$stripme $dir/$realname $destdir/$realname" + $run eval "$install_prog$stripme $dir/$realname $destdir/$realname" || exit $? + + if test $# -gt 0; then + # Delete the old symlinks, and create new ones. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + eval cmds=\"$postinstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case "$destfile" in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.o | *.obj) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit 0 + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + link_against_libtool_libs= + relink_command= + + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Check the variables that should have been set. + if test -z "$link_against_libtool_libs"; then + $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 + exit 1 + fi + + finalize=yes + for lib in $link_against_libtool_libs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case "$lib" in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir="/tmp" + test -n "$TMPDIR" && tmpdir="$TMPDIR" + tmpdir="$tmpdir/libtool-$$" + if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : + else + $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 + continue + fi + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + # Do each command in the postinstall commands. + eval cmds=\"$old_postinstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec $SHELL $0 --finish$current_libdirs + exit 1 + fi + + exit 0 + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + eval cmds=\"$finish_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit 0 + + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + echo " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + echo "See any operating system documentation about shared libraries for" + echo "more information, such as the ld(1) and ld.so(8) manual pages." + echo "----------------------------------------------------------------------" + exit 0 + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit 1 + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + dir= + case "$file" in + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit 1 + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case "$file" in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + + # Restore saved enviroment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now actually exec the command. + eval "exec \$cmd$args" + + $echo "$modename: cannot exec \$cmd$args" + exit 1 + else + # Display what would be done. + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + $echo "$cmd$args" + exit 0 + fi + ;; + + # libtool uninstall mode + uninstall) + modename="$modename: uninstall" + rm="$nonopt" + files= + + for arg + do + case "$arg" in + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + rmfiles="$file" + + case "$name" in + *.la) + # Possibly a libtool archive, so verify it. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $dir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" + + $show "$rm $rmfiles" + $run $rm $rmfiles + + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + done + IFS="$save_ifs" + fi + + # FIXME: should reinstall the best remaining shared library. + fi + ;; + + *.lo) + if test "$build_old_libs" = yes; then + oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` + rmfiles="$rmfiles $dir/$oldobj" + fi + $show "$rm $rmfiles" + $run $rm $rmfiles + ;; + + *) + $show "$rm $rmfiles" + $run $rm $rmfiles + ;; + esac + done + exit 0 + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + ;; + esac + + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 +fi # test -z "$show_help" + +# We need to display help for each of the modes. +case "$mode" in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --version print version information + +MODE must be one of the following: + + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE." + exit 0 + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; +esac + +echo +$echo "Try \`$modename --help' for more information about other modes." + +exit 0 + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: --- /dev/null +++ jpeg-6b/testimg.uu @@ -0,0 +1,873 @@ +begin 664 testimg.gif +M1TE&.#=AXP"5`/<``"PJ+&F/3)DN)4=;.)=43*#)F+R,>EI;F=%238.,O]T? +M*7)83%TL)WRK8=`Y+L]S;=K.K#8[*Y&1='%U6YET9N\U,>+HR5-U1/-06)<\ +M+6)"-4-`7W)UH)FNKU-99KJRI'23=$@_,KQ33+X[+6UG5J*+O=K3V(5`,M!$ +M/=%B77-VQ/LU6X=W9%E:.H^A=.+HW^:KIO9B9IBP?O/LW9AVGG.=5K2TZTY- +M-_9R<:18>/H<-'5WJ(,Q*LG(L],]1F-U8%U./KX_1YV3V'F,9/!%1W5LF[E:>:>ADHEI +M5IB^AKQR:?I4VL!@7]%(48^/W(A:3F)I9N`X,J>0 +M?8=.1(2!JKTC)$A"/OEE=\UD@2PQ+&IIEV""2).@C_?O\?F!@^2-B>!33_DK +M2;Y$-W!J>H>$S*A325]<2LV"@ZNOW3H_-7"#64]/2,[`LDMI//(Y0+R@D;UV +MG>&BG+F-L5%.9=W`M)F`"M&(V+;YHAM$M*IIE@N'\Y4@T+V!;:_FQK+\Q*-_=W<]T +MDJ-OA,^/BH5<;ON.D+>?O(>#<(FMA)\]0/>?HJ>MD5-1C'N!R,?6MWHMTU#:H"1?G6"=*EC6[R#H:A#-#^_ +MN>$M+:AE?F&!8($Z+KY(1Z_3K*DQ)N%S)D=N!TBH9K?VJ/ +M8_IU?][;QI2:S/'A\JBN^*:@Q:"C\5]W2KZ^O69JLK2Z_,$Q06\M+9>QE*63 +MD:M58SIW>57+QH8BP`````XP"5```(_P#=K=FU:]>N7;MV[=JU:]>N +M7;MV[=JU:]>N7;MV[=JU:]>N7;O$71%"A`@1(D0(-&C0W`@1XD:(&R$TA%"F[$09'[IT2:-#!X4T +M%"CF18D2)4H40(```0($*`JV)2A&T!FA:P0=>'3@Z=*E*T.&##XR^#B1(<.) +M#!DR^,B0(4,&'QE\9,B001<=.G1&T-'EHXRR$)MV[=JU:]H'GSH@"*$@40 +M($"`L,5S@`(>'7ATX-&!ITL7/%T9=/GPD2'#B0P93F3(<"+#B0P93F3(X"-# +M!A^H=.FB0X<.'5UW3BC;M"G$KCV[=NW:M6O7KEV[W.W:M6O-KC5KUKA;L\N= +M.W?NW+G;M$F#LC($".2P1H.&&3.L.!R0)4M6'UF%.-69]/#ATZ=.;%PQ8E7I0H@``!B@(H2CP4(T;H&J%K +M!#Q=(W3I@J-NS1IW:]SM7+W`%9LF3)*B2K#Z<=9B3,>F5J!PD\_WV,>##B;LV:-;ON7;MV[=KE;I.[7>YVN=NU:]YVN7/G;I>[7>YVN5NS +M:]>N-;MV[=H58=>N71%V[=H58E>(""%"A`@1(D2($"%"A`B!!F"()AHT*#MQ +M(DF&#/!TZ9(F#<62>/&B`(H"*`H@0(#BQ7-`9\0(72-TP=,%3Q<\'_!\9/"1 +M(<.)#!E.9,@0[42&:!E.9,APPD<&'ZATT:%#AXX(701.:`BQ:=.>/9OV[-JU +M:]>N7;MVK=FU9LV:76O6[%JS:]>N7>[[W.W:Y<[=+G?NW.URM\;=&G>[=NURM\O=+G>[UNS:M6O-KEV[=NW: +MM2O"K@B[=H78%2)$B$TA-FW:%")$B!`W;H1HHF&9LA/1HF7(H$N7-#I?4,2+ +M%R\*($"```&*`C`>"CHC=.F"IPO>"%WPX.G*`,]'A@P93F0XD>%$AA,9,IS( +M<"+#B0P9?&3P`8\.G1%TZ-"Y;&(2HITS9LE';I`A18<[<*EFR9,F2)0O-AE^%.(D1 +M(P;_CX<6'O`8P0,`P!IW:]:X6[/+W2YWN]SM&$CJX[99:%"+%KSZ8]F_;LVA5AUZY=N];L6K-FS9HU:]:LV;5FS:XUNW:Y +M<^=NTR9+EC0H&R7E%BM?*LP=6"5+EBQ9&V1M0+/AUZ\^_WWZ].G3P@@>3@`` +M`%CC;HV[->[6K'&WQIV[76ON")MV10BQ*\2N39LB;`H1(D*($#=" +MW`BA08.&>B>B1/`R +MZ,K@(\.)#!E.9#AQ(D.T#">B93B1X<2)##Y\9-!%APX=.M)$W`FS0,.>/2%V +M`=RT:]>N7;MVK8FP9M>:-6LBK%D38P7,&`>\.#!`P#`&@``UNQ:X\X=@%WN +MW+E;X\Z=.P#NUK@#X&Z-.P#N`+A;X\Z=.W?N`+@#X&Z-NS7NW*UQMV;7+G<1 +MW.U:LVO-KEV[=D78M6O7KEV;=FW:%2'$IDTA0H0($2)$B!`A-&C04*]>M"31 +M?/C0I8N.M"\HXL6+4B%*A7@HZ.B"ITL7/%VZ=.G*H,M'A@P9,IS(<"+#B0S1 +M,D0[D2':B6C1HITX<<*'+EU.Z#B1)JU6K1X+\/3YM2O$KCV[]NS:M2O"FC41 +MUD18LV;-FC5KUJS9M6;-KEUK`.YRM\N=NTV;T&@8(J02&#NL5)@[($O6A@T; +M-OS:\*O_#S`/'CP`\X"G!1X\:P"L`;`&P!H`:]:X6[-F#0!W`-8`<`<`@+LU +M[@``<`?`'0``[M8`6`/`W1IW[MRM<>=NC3MW`-RM<;?&W2YWN];LVK5KUZY= +MNW9MVK4KPJ9=FW9MBK`I1(@0(="$T!#"DB5+]>I%BY8A0P8?NG31H4,G7KQX +M4>+%BX=BA"X?NC+HR@`O`[P,&3)DR)#A1(83)TZYV[=JU:]>N7;LV1=BT:].N +M39LV;0H1(D2($"$LA;!4KUZT:-%.9,@`3YBG8@6[42T$R=.G#CAPX>N.[KHB+CSS]JA +M0RPF'`'6YP::/2$B[%H38.CPP^=&7(D"%#A@P9,F3(D.'$ +MB1,9HIV(%BU#M&@GHD4[<>*$CQ,$?/BX(^V.B%K6Z)%Y18N6F"-]?MU`LR?" +MKC6[UNQ:L\;=FEUK=JW9M6;-FC5K=JU9XV[-FEWNW.W:A(;3CE=(8'U+P"J! +MKUD):-'R!8W_UBQ<2$XAP35K%I,C+5K@60-@S1H`:P"L<;?&'0``[@`````` +M````````````````````````````````<`?`'4``:]RM<0=@C;LU[M:X6^-N +MC;LU[M:XV[5KUZY=NW9MVK5IUZ9=FW9MVA1BTZ80FT)LVF3)4KUHT:*=R)#! +M1P8?NG31H4,'`0H1='3IRN`C@X\,&71ER)`A0X8,)S)$RQ`M0[0,T:)%BQ8M +MVHEH)TZ4.5'&AZX[NNZPJT6/C(M7N&C1$@.L3Y]?:/9$6+-KS9HU`-:L<;<& +MP)HU[M:X6^-NS1IW:]RM<>?.W:Y=-X[02O`*"9($"9!T0-(!"1)<_TAF<4&B +M3ITZ)+AFT?+0HDF+-6O6`%CC;HV[-0#6`%@#```````````````````````` +M``````````````````#6``"PQMT:`.[6N%OC#@``=P``N%OC;I>[79MV;=JU +M">"N7;LV[=JT:].N$)LVA0BQ*<2F398L6:H7[42&##Y09[6N%NS +M:XV[7>[9(BSZ_\.W9LVN-NS4`W*UQYVZ-.W<`W*UQMV:7.W=KUJQQY\Z=NUTWCO"9 +MY<8-$B2G.A10I$C_D:("!4YU>'1*W:E3LT`P:7&CQ8TU:P"L6;-FS1IW[M:L +M<;=FC;LU````````````````````````````````````````6`/`W1H`[@`` +M<`<```!W`-RM<;=FE[M=FW9MVK5IUZY=FW;QV+5KTZY=N_;LV15BTZ9-FRQ9 +MJAN%CTR;F2<.H5KUBQ:$Y@<`0;LQIX]$7;M +M`N#.G3MW[MRY`^`.@#L`[@"L<0?`'0!W[MRYBX"O!9]9+MS@PN7&2H$"_].F +M32M@Y=2I4Z=.G<(UBQL38#>RW`"P9LV:76ON3;MV;=KE;M,N=YMV;=H58M>N/;OV[-JTB8$E2_7J13MQXH2/$R[6N'/GSIV["%E:\($RRX4;7*<>%?\H4*!`@0*/3IUZ=.K4*2[< +M:!T!EN4&FEUKW*U9XV[-KC6[=NW:M/!@8$F#LF@G3IS(D"%#M`P9?&3PD2%#A@P9 +M3F2(=N)$M!,G,D3+$"U:M&C1E-53IJS>B6@GRI0I4Z9,&1\$>FP[9,H%+C>G +MW)Q"@HL+"&[0F%PX<@38C1`1=KESY\Z=.P````(```"`.P#NW+ES!\`=``#N +MW*UQ%Z$%'R@N7+AP<0K_UR,K!:P\.G7JU*E3N$[AF@6%R1%@-[*$6+-FS:XU +MN];LVK5KUZY=NW;MM7CUET>K54W;BQ(DR97;O6[%JS:]>:"+LB[(JP:]>N +M7>YVN=NUR]T:=VOYV[=JT:]>F79LB;-H58M>F7;LVN=NU:]>F79MX;.+!8Q,/=YO<;=K$P)*E +M>LKJG3AQ(D.T:!E.G#CAXX2/$QE.G#AQXL2):!FB98@6+5JT$]&415-V0EFT +M:"?*E#E1IDP9'P0RL3`U"Q>N4Z=.G4*""Q<(;MR@08,&[<(18+_P15@#```` +M``#<`7`'P!T`````````8`V`76L``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`````%@#``````#W;MV;,KQ)X-NT+L"A$BQ)Y->S;M0K,KQ*X0NW:Y +MV[1KUZY=NR*XV[5KUZY=NR+LVK5KUYY-(4+L"K$K1(@0(4*$"!$B1(@0(7:% +MV!5B5XA=(7:%V+4'S:80(4)LVK3)TJ80(2Q9JA`C6K0D)S*< +M`)@AVHEHT4XH.Z%,F;)HT:(E$:`+#JE_/LHH6[:L28L%"\)4F<""PC\O11#( +MJ59-E`%[9,A(.$1&@@0)$F;-H@5EPH1[>&Z$8+!I$X]=N]RYV^5NDSL>/'CP +M"-$"#XDC_Q,F\.'#)P"W&B!J<*G!A1L7+KBX@``!`@04:-`N`+N!)L2>/;OV +M[-FS9\^N#2'VA`B!9D.(#2'VA$`3(D2(/2$V[=D4(L2F79LV;=JU:5>$7;LB +M[(JP:U>$/;OV[(JP*4*($"%"A`@1(D0(2VA";`JQ*<2F$+M"[`JQ*\0N-&@V +MH;&TR9(E2Y88,*A73UD9'SX(H$*%RL>=.^S8W4&5`56&$P*B)3EQ0IDR9_=(`%QPKTJ5'O\>R(FW90Z@?1BNX>#%BU<<2I0H +M43)`A@R90X<.5>E1IHPR9>D86.+!@T>(39LV;>+ACLOQ+(6?>G#ESYLR9$R4*!CG7Y!P[]N#!@PW9MBK`IQ*X0(4*$T!`B1`@- +M(4)L"A%BTYY-(?9LVA-BCX9-Z5"Q*S(E!2H?!'R($(%`FBX?J.#!@T<-GBYX +M&3+`TT5'%S543J2)T.4C6K1T29((-"$VH$$3`@V:$&A"H`F!!DV($"%";-JS*<2> +M37M"A-@58M>N"+MV1=BU*<*N$+M"A`@1(D2($"$TA`BQ*02:32$VA=BS:4^( +M/2%";&(0S5B1:QB,"'1TT=$%#QX\>/"H.4'G!)V3 +M+\:,94B2)(.T(MC&8,/D8`0*$;4(+"!194*5*M8>8(BR#]"^*/M6[`.T8LZ* +M.7,`K5BQ8L6*??NT:-&R;]\^+5JT8,&"!$I23LKEW#MN0, +MM0P9,M"AL\0!/%WPX-%Q(DT$/%WPX,&#-V*$$Q1+1BS!)D<.G2\($,S#-L89 +MIC&8EHR@(R+,LBI5PO2H]:!:%$"``$6)$B5*E"B`5LR9LV+%OA7[]NW;IV6? +MEGU:M&C1LD^+EGU:L&BY=DV-L1,,&(1HN6& +MRH"+LVK5GUYX((?;L0;,'S1XT:'ZA08,& +M#4`T:&Z@08,&38@0(4*$"+$G1(@]F_:$V!5B5XA=NW9MBK`IPJX0$4*$"!$B +M1(@0ED)H"!$B1(A-(3:%V+-I3X@]:#;5\V'L&C9LF#Q1HY9!0(81(]#!@P.`,,#;%>$7;OV[-JS:P^:/6C0H$&#!@T:-&A^H;F!!HT&-"'0A`@1 +M(D2($"%";`H18E.(/9OV;-JS"^">71%"A-@5(D2($"$TA`@1(D2($)9";`JQ +M:5>(72$BA-@3(D0Z=L:!DR9(`'+T,&>`+@P7-"!QX=7?`RC*!# +MA\X(!V,4;-&Q9'*2(D^M,F7N_#N&(5Z4*-A0.*"# +M0DZ4*"L``9H#"-"^%2M6K-BW;]^^?5JT:-FG99^6?5JT8,&2!DN::J"\G/^H +MIVQ!%5/K`GTH5HQ8L7*3RDU*-,S$IRY=/IGH8L)$HF*J7M%BPN3"D2-'UNQ9 +MLV?7KCV[]NS:@V8/&C1HT*"Y@>;W;MRX@>:&!C0:T*`)$2)$B!![-NW9 +MM&?3GEV;(FR*L&M7B!`A0H0($4)#"`TA+(4(L2G$IA`A=H6(`#!"B`A[+$7S +M4H0:-6K4J%'3I4L7/!_PJ&6`AXH:/#IT=,&#!P\>'6ET/(UP,,;9EBU;MFS9 +M4F%,A3'.QHQQ,,:!`SHC'OR[1LP#!&@?H'U1`&D! +MM`_0OA7[]NW;MV_?/BW[M&C!@D7+/BQITJ1)DZW_6K):818<6O>AW*1$B1(E +M2I3(A(E/X,"]`#<#'+@NX$PD*D?LU2PF3)B(87)DUYI=N_;LVK,+S9X](?:@ +M0?/KUPTT-]#T+L +MVK,I1(@0(4*$"!$B1(@0FS9MVA0"S:X]>_9$"*'AGS1J\.!1HP8/'CQ=NN#! +M@T>-&K4,\'2A`JA+%SQX\$;0H4/'TP@'#AR,<59ARY8M%;94&#-FC`,'F!QX +M\D0'`0H$QXYAB%(!4)1X\9R,@.<$'H(O\>(!`@1H7Y0H4;3LV[=/BQ8M^_;M +MTZ(%BQ8L6K! +M@`/7I8N)1,46O:)%:P<46K36[%JS:]>N77MV[=JS)\0O-&ANH/F%Y@::&S=N +MW.C3QPBG0H7ZH`D1(@2:$+LVA-BU:<^F/;MV[=JU:\^F/7OVA`@1(D0(#2%" +MA`@18M.F39OV[-FS)\0F#67NP,M`+0.U#/`RP(-'9\0(:B/@P8,'#YXN.O!T +MP1M!APZ=$9X<.'#@P,&8,6,J;-E2H<(8!P[&`!SCP(&#$2-0H$`0!4,40("B +MQ(N'8L0(>/#@T9&&(!Z@*%&B1(FR+TJ4*/OV:=&R;]\^+5JT:,&B!E"M-#E&)-,P"N!?@P($#!PX<."!O@``!`@3(FQEOP'4QD8C8HE>S +M9KV2(&&-NS6[UNS9M6O/GA![]J#9@P;-#30W;MRX<>/&C4*3$5EH +M-H38L"G$KCV[]NP*L6O7KA"[]NP)L0M-B!`A-(0($2)$A!";0FS:M6L7FDV; +M&*2+Y@,>-0'PX&40``\>/#JZ1HP8,0(>/'CPX,&#!X\.-3K24(SPY,"!`P=C +M'(P94\'9E@I;G(UQX&#,F#'Q'#@8@<(!"A11HD2)$@4;"A0C1L"#!P\>'03Q +M`,8#%"5*E'U1M$39IT6+EGU:M@D6+%BU8L&!)@T7_BQ8L\[Z`HJ2!A8%( +M7=Z\`?+F#;@WX-X`>0,$"!`@0-X`>?/F#;@7P\H16[3(#3$WB]RM6;-KS:Y= +MN_;LVK5G3XA?:-#<0'/CQHT;?=#TX52'EADS0H34&6*DD*P->S9LVK!KTYY= +M(?;LVA-BSZ8](4*$"!$BA(80(4)$"!%ASZX0>W:%V,0C71)4J.!1@Z<+'CQX +M&>#!@T=GQ`@4(^B,&`%O!+P1\$:,H(,"A2=/#APXS`!G(M&/#Q^(E?M!;-<:=VO>/;O0[`FQ!PV: +M&S=N-+FAX881,1S,P((%"Y89%5*$<3(B2Q::/;MV[=JU:]>>77MVA8@0(D2( +M$"%"A`@1(D2($)MV[=FS:T^(39;JH4*%"AX\7?!TP8,'#QZ\$2-&C'`P`L6( +M$=1&C!@Q8L0(%",\>7+@P-F8,6/&5*C@;$N%+16O&NI.J4JD^Z9*$3@W@`!`N0-$"!`@``!`@0($(!`W@!Y\P;( +MFQF?AB52DJA5(B62=NW:M6O-KC6[(NS:M2?"GCTAT*"YT4?#C1M]^GBH8P;6 +M-TB,OCVQ8\>,$#9L.!4JA&;#GCV[]NS:M2M$A!`A0H0($>)&B!`A0H38M&?7 +MGC41]KC;9$F9#U34X,&#IPL>/%TCX,$;,6($'0<.'(P8,<+3B!&>/*%`@>F, +M`P>8QCAS5J&"LPI;*FS94F&,,P<.QF`:@\F!@S$H\LE!@8(."A0C1HP8,6+$ +MB!%TZ(P8X>!+/#E1HD2)$@6#%BU:]FG9AT4+%BQ:L&#!@@7_"Q8L6K!@24.* +M%)PI=_Z):M;E#1`@0(```0($"!`@0(```0($")`W;]Z`Z^+-A#<+GUZX:K5G +MUZY=NW;MVK5K#\!=NT+L"8$&S8T036XTN:&ACY$Z9F`Q&A=N'"-&W\#`@N5+ +M"(/`684*SBILV;)E +MRY8*%9PY<.#`@0,'#C`Y<.!`CIQ\"%#0H3-BQ(@1U$:,&$$'!1T4*.9]F36GF7<-0Y%\>&(C>O`$" +M!`@0($"``'D#!`@0($#>O'GS!EP7$Y^ZO)@Q0],G5R'V1-BU:\VN7;MV[=JS +M*T2$$"%":+BAH8^&/K(XU3'SK4.X<.'"C1LW#B"C)]^^F?$E1IB'0H4*;=BP +M(42$$"'PA<"7)<2O7WLV;"CD08PP,9P6-%%6IH>/#!ETC=`U0A>=$=1&C!CA +MR8&#,0X<.,"TQ($#!P[B.<#D8,P8!V.<5=A28F#'Q\N'(%\59A0I;MFS9LF5+A0K.G&'"Y,"!`P<.'#APX&",@W@QY*"@ +M,P+>B!$C1HP8@<(!"@1R$(R@\R5>O"@8,&#`H`4+%BU8M&#!@@7_"Y8T6-)@ +MP8(E#9886*)HP8#EWS-1_1"]>0,$"!`@0(```?(&"!`@;X"\`=?%Q#`3,]X` +M`0($"+]/(?:$V!4BPJX(NW;MVK5GUZ80(4*@T7"CCX8F?0H-X0`&4KAPY\Z% +M.W?NG(UPX1@QLL.*@S!A!PYP6E5HPP8T>]"@0;,!31\/;#CX,E.)1JAG[-B) +MD*9K!#QX\*C!@P/'BC1DSQH&S,?&B1!D#R($S!Y@P.8@2!5"%+5NV`-RR94N%"L[& +M8,+DP($#!PX<.!CC`).#,0XPY$/A:<2($2-&>!KA8`0*%'(0H*`C+1Z">!CD +MR)DG)U\^+%BP8/_1@D4+%BQIL&#!$@-+OA@Q\J4YEJ)'&0KVFB$"!P0($"!` +M@``!`@3(&R!`@`!YT\6$B6$S9@`!`@3(FQ=HT*`)$2%$A!`1=NV*L&O7GETA +M0H2X<4,#FB9]"G'BP`H2I''APH4+=^[7!(&ZI&;*%R?HL,U;XHG.B!'PJ(V@!F_$"`F'AC +MY,1S$"^?G'@.`(YP,&*$@Q&>1M"A@P`!'3IT4*!`@4`.@GE?\N5+DP;_BQ8L +M6K!@P8(%2XPT:=*DB9$FVX,4_\)H"-,KDJ$N;X```0($"!`@0(```0($")`W +M;[HX,A$+"!`@0(#P>W$#S0TT:$*$"+$KQ*9=(7:%V+0A!)H0&M`TT="DD!$V +MOF!!&AKRY@T0($"```$"!`@0($"```$"9(8W;S-F``$"!,B, +M%WUNW$"#!DV($"%VA8BP:<^F/2%"W+@1XD:(&QKZ>*CCZQND<>'"A0L7+ERX +M<.'"C1LW;APC,&#LL%+!@4,=8:-&E6%GK`B">=BP8"@<.'#@P-F8,6/&C!DSQH&S,9C&C'%PQ@$*!PX<5``4!5"% +M+5N<.<.$:/-0H3;AAAL&`<.QC@8,6+$B!$C1CCPY`"3 +M`V>8'(P9XR">@S%CQCC`-,:!`P<.'#CP-,*!@PJ`HE2HL,49)F=CQHP!5*'" +ME@K.G&'"Y,D!#CD.ECB0,R^>`P>>'(P8,6($G1$C1HP8,8(.'3H(4"#X$N/_ +M6!H<:;!@P9(&2YILO.!4.Y8M39ILI%+9(T/B1@L2O0R!`_<&"!`@0(```0($ +M"!`@0(```0)DQ@P@0(```0($"$`@39K/K&R1(X\:-"QSW(4^3(/ +M&R!`@.+%0X&"#IT1.I<&1)D8,+&G29,L& +MAU0<'-VZI;E&JE,D*D=^];E'QE"7+D"```$"!`@0($"```$"!`@0($"`S``" +M!`@0($"``.G3I,^-)C=NW$`3`DV($&A"A$"#YL:-&QIN-&DB"Z"1.KX20((T +M;MRX<>/&A0LW;EPX/>/"Z0DW;APD2'I*Y;HD[0LV;-BPQ8N';4P\%'10>)(3 +M)5X40-BP+7&`@@X*%"A&C!CA:80#3Y@P.1L3;XRS,6/&C'&`R8$G3PXP.7"` +M"9,#3`Z/&C29]C(@QDP`,I''CQHT;-VY8'#APX,`3)@>8G#ES +MYLR9,V=;G&T9XVS,&`=C/*%P$$]./!3YY,A!@<*!@Q$.1HP8,8+."%TCX(T8 +M,6+_!!T4QW#DPX'C6)INW;JEB2$G!@XXW;IAP7(LU2)NY`:TF$#%#[@W0(`` +M`0($"!`@0#1IT@0$"!`@0(#,`#)CQHP90(``:=*D29\F-YKTT7`#C880-T*$ +M0',CQ(TF&FYHZ-/$"!M?"6!!`O/DR;AQX\:%&S=N'*1QC)X\@01)'Z%1@C`-G8\:,<>#)TPA/(T9X.A.O0CP'#D8X\.3`@3-GSIPY<^;,V9@QF!PX +M<.#`DQP'\>)%R2<'@YQX*!R,<#!BQ(@1\$;H&@%O!#PZ__#HT*$CY]@Q'#CR +M'<,A)U^:;#%BX,"!`P<&+-=248%V`1B>"8&\O0$"!`@0($"```&B29,F39J` +M``$"!`B0&3-FS``"!`B0)DV:-&G2I(^&&S?'B88N'#1L@;$N6 +MH$#AR4D^;/&P81NSQ`$*%",\C4!!9P2\$2,<.!@S)EZ%,9B/8L7Q?CJ5)DP8'CFXX +MTD3!<"V5!"9__ASAH\K1&R!`@``!`@0($$V:;-FR98L?/R`S@,R8$&AAL:^MRX<>/�U-FMS0T,=('0Y"$L""!0L,&$A@ +M($&"!`D,K`0)6)D1O'E1``&:AVW)EQ$CZ,B)%P_;&&PH +M4*!P,&+$B!$C1HP8X<"!@S%C*HP9,V:,,V<5G&'"Y&#$"$^>',0;4V',&`>> +M1CAP,,(!)@<.'#A`X<"3IQ$.`(YPX,!!O'B8*HQQ-F9,/#ER,,B1XX#.B!$C +M=(W0!0__W@AX(^#1H4/GV#$<.(X=.Y:F6YIC,=+`Z88CGY9]UWB1X4..W`13 +M'RR\`0($"!`@0#1ILF4K2)`@02Q8L!`+R(P9CAPYZC)CQHPF3?HT:7*C29,^ +M&OIHN-&DCX8^&FXTN7&C29,^30IQJB/$EYD$=F#!`@,&#!@P"1+X\N7+'!LI +MF7(4P;8"T#Y`\5#,BS1@A(,1#APX&!,O7CP4 +M#D8X&#'"P8@1#C#%#`@2<4*$;`&P$/'CQX_P#AZ8*G"]X( +M70B.'3MV[%B:--VZX8@1`T6O2I$F3)DV:-&ERH\D-#7TT]+G11T.? +M)DV:W&C2QX@1,4,X"!%BQ@PK.PGL)$A@AQ4'%6S,"1M%@-T7;"OF[`,414Z\ +M>5$`[8N'`H6T$?`0H'#@`),#!RCHT!DQ8L2($2-&C'`PPL&8,6.<5=BR9&/&Q(N'@LZ($0Y&.'#@(%X4 +M9\XJC!GC8(R#,0X/'CP=(T0D>(8#AS9<'3+A@-' +M&AS=NJ6)@47+/H`8'MASX6\6,A>JE,2*I8D?/UM!6BE29*5`@0+!@@5KU>/'ER@`+%B!$C'(P8,6+$"$\.'#@8,\99A0H5`%78LF7+EBU;MFS9,D>' +M#AU;MCAS@,F!`P=CQD2I,*;"F'AR4#APX,F3`TP.XHT96KLN7#ASY\$%U14N7#A +M`A<7+KB0X3KUZ)$5*U:L,"/VXX<2;R8,^?%3[,.-)C>:-&G2I(^&&TWZ-+G1 +M!&"?)DV:-&G2I$F3)DV:-#%BQ`@G3L+82)%RRXX=&G9HW*(A[U8.5-3@C4`Q +M!E`40(```8J";1ZV)2-&P(,'C\Z7>-@<.$"!8@2U$0Y&.!@QPL$(!PXPC1DS +MID*%"ELJ;-FR9/\:,<+3"$^>/(WP1(T:M1%T$!RK +MU@U.-SC=NG7#T0U'FA@8]NV+/'CP1J!`,6;,F'AR4%`;,6*$@Q$.1CAP@`G3F`I1*E08,\:9LRU;MFS9 +MLD7'%ATZ=.C0L040($!1QCBKL&7.E@I;*E1P%F_,&!Q1,&%R$"_>&`=C'#AP +MX&G$"`#`Z0:G6[=N:=+$ +MP*)EW[XH*0[QX<.'#Q\^4/CP(=<&6@!NR)#A>O?HT:-'CQY9D2'#S8\@2!`C6ER)=X2U"@0($B7A1`@*(`FK?$B1-X(^#!`PAO!(HE#L;$ +MBR='SH@1(T:,0.'`@0-,#L:,J1"E@K,Q8\94<.;,V98MSK9LF:-#AXX5SK9@ +MB($!$"!G6[8`VE+!F3-,8S!%P8$A7KPQ8\8X<.``DR=/(SR-&#%BA`,Y_W(< +M>'(0;PRV>(``Q4/AP(&G$2.D'<,!!PZ<;MVZ=>O6+4T,+%KV[8OBI0HY'#AP\?/@&X<4&&[%2#!J<>/7KTZ)&,1S)-;FAH8F&&TUN +M--%P0T.3)C>:-&FBH4F3)DV:-&G2I$F3)D::&#%B9(@P*4*$5.K5KITV;=>6 +M:-F'(1X*%"CB10$4)4J4>"A&T!D!#QZU$2-&Q,,6!="8>/E0.!CA:<0(!R,< +M8'(PID*4"A6<`73FS%F%"ELJ;'&V9<+DR4&^?/GBQ8OGP($#!PX<>!H!#]Z($=1&C/^0$\\!IGB`QHRI4&%,A3%C +M'(P8,4+:L6-PX,#IU@U.MVYITL3`$F7%/@PB%ARY<($<'SZF^$#QQP49LG>G +MWN%Z]^[1HT>/'CUZ),.%&U4__`PK1DQ?$PU-;C1ITD3#C29-FMS0T*2)AB9- +MFC1ITJ1)DR9-FC1ITF29D65&C`B3(D3(K5SMM&G+=FW?G'U1HJ!`@0)%O"A1 +MHD2)MX3."'C4X,&#-\)!E"B`QHR)EP^''`Y,20(\>!`SDH +M''ARX,#!B!'PX(T806W_!`H4*!R,&0/(684M6[94&#-F#`I/GNC(.08'#IQN +M<+IUZY8F#18,6O;MPR!B00MR;?BP@`)%@C]/,V1@'%@A(,1(T;`@P=/%SQJ +M_P!'((@7;PRF"A4J5-BR9D&IQN<-&G28,&@9=\^ +M#-):_"%'#@H4"5!/7KWSH6,'TJ M$[)N& +M&QJ:-&G21$.3&QJ::&C21$.3)AJ:-&G2I,FR%DT6-%G6I,FR94:,U-DA1`B- +M7NWR=$N3+\J<%?OV`9H7;\F2>/&PH4#A@,X(>/#@C1B!`H6#,<[&C''F0`Z. +M?"@<.!B!R<&8,6/&;*D`:,N<+3JVZ-"A0X<.!7,4S)FS0DN:&%@P8,"`;`A&T/'D"86<>9X-1&4/^C-D(.@GACQHRIL&7+ +MEBU;ME2HX,P!"D\CI!WK!H<4'(!PX'1+DR8?EGE:`*V0HZM)BR-MH/CSY\*% +MBW>G3B%K@`Q9`USO&KQK\*C!HT>/3LE@]D-)HG(=D#1ITJ2)AAM-FC1ITJ1) +MDR9-FC31T*1)DR9-6C1ILJP)GB;+FBPSLDQ8'0YF$ICIU2Z/-APX8D2)`@A0 +ME'F`L&$;@\W!$@'3H.'(P9,V;,F#$.QHR1DP_%"`@`P9X,&C1F>$ +MIQ'HXLE!@,*!)P>81HP808W_VID1*.+)B3?&F;,*6RILV5)A2X4*8\8X\#1B +M1`H/3ND0QUS)B5ZX"$5I,F&IHTT=!$0Q,-39HT:=)$PXTF39HT:=*D +M29,639HT6=;$R+)E1CA)\64F@;@2O00]@(,C1@P,43!HB0(($+8Q8U`XH#-B +M!#QX\."-6#)BB0,'F!PX&#/&P9@H7(0+UZ\>`Z<5:BPI<*6"A6V;'%684P\3R-&I*A&"@XI.-W2I,&" +M17G!PQ,`0)8J6*%$`81NSQ`&*$71&P(,'CPZ=$9X<.,`T +M9HR#,6/&C!D33TX\!Y[BQ8M2H0(@0%'F;%&P9E#%CHL0; +M,\:9LPI;*FRIL*7"E@H5QCCP-&)$BFJIX,"!TRT-%BQ8M.S;IZ4(*F4W6I!K +MXZ^&/V3(D"%#Q@49,F3(D"%#UJ!!@P8-'C5X]$@&+EP@:!WY]:M)DR9-FC1I +MTJ1)DR9-FC1ITJ1)DV4MFC3ITZ2)$3Q&."W@!'#(D"%U.+!*8`<,F!(E>B7+ +MPPL.CAA8,$31$@70F#%CECB@,X(./%TCZ""0YLG3"`<.'(P9XV#,&&=C\L5S +MX"#>F"A;*LP!A`$#H`H**FRIX*Q"!07.G`&*D@\#MGC8L(T9X\"!@Q$CZ"!` +M\&4$-4\(YLG)AR'?"`!L3+P1U.`A@$.*%)QNW=)@P:)EW[Y]UZY%J]?D#[D`_OS5X((,&;(:R)#5 +MX%(#&3(N#;@T:-"@P:-'[]ZYP`4%FH=?OYHTT="D29,F39HT:=*D29,F330T +M:=*D29,F?8P8&3*D3IU1;.IPX.#+%RLP8,`\J23O6:@K#W#@B!$#0Q1`@,:, +M`3AF"0H4=$;`&X$*'H(4"$:,\.0`Q1@'8\8X&S,F2KQX\<8X&^-L2P5`&&+D +MP^#,F;,H%9PYP^;,01ILF#"=68)M#"9LV#"A<_!%3HP8,6(XD78L!HXTN6)@T6+?OVK=`R;THZ#2V.\&GCSU^-&LBXU.!2HP:R&LB0(6N`K$&#!@T: +M-&CP[ATR%_Y`,!'CH4F3)DV:-&G2I$F3)DV:-&G2I$F3)DV:]#&"A].0.CN$ +M2.&P@P,'7[Y8V;%C!TR)2KUZT;-&0(0<.?DP8``T!M`8;&,BA$C1HR`1TU:BA0I1(P8,6*,`V<5 +MG(T9,R9>E#%CQE2HX&Q+!4!1HN2+DL]9E#%1QF#"-,\!NC/8`"[!!FB,,V?. +ML&F)D09'C'Q88L3()P<%)@<.XLW#("?_7KPQ8\9LF3-GRYPH4:(X&S/&P1AG +M%2ILJ;!ERY8*SL:,<4"-VHAJI.!T2Y,&"Y9]*U;LNR8MFH80+8Z0XQ/`GS]D +M-6K4J%XT:7&K40-:@1HT&-1HT:/#.A0MDN*#0@L:D29,F39HT:=*D29,F +M39HT:=)D69,F>)HTX<1I!P!@Q(@1=*1Y29$B!9T1#AQ@&E-AC+,Q%<;$&^.L@K,* +M6RI4V%(A2KY\..;-PX8%![9N.#`LP;0D2@5`@%8XVQ<#1YH8,;"DB9$OGYQY +M#C"-P30FGIQX_P#C.<`T9LR6+8"V``($J(*S,<[&.*M0H4*%+16V;-E288P# +M%-1&P,,!!TZW--FP8-&R;]^^:^P8W$`SH`6Y-E!`^$-6HP8W;C4"^*M1`UF- +M!C4:U&A0HP&R!LB0(?,'!1JY(T>:-%G68EF3)LN:-&G2I,FR%DU:+&O2Q(@1 +M,5*$"#%CQI<*%>94L&(%ZYNX8C^40(```0($"!`:4:KUX($T!#&BQ!N#;?/W_^:@2H$:!&C1HU:M2H4:-&C1HU:C1`5L,? +MGS;D_@P8D*5)DR9-FC1ITF)9DR;+FN!9UF1!DR8M.(FIPX&#+U8J5'`PIT(% +M*SO?]!13HH0($2)$B!"!8,A/('H&\HA(@2.?'$#8`&$;,V;)"`/#D8XVS,F#%CQC@;,Z9"A0K.G#D;,V8,BB@88L3`$@,+!@PQTL3(AZ'" +MEBUSMCA3L`)#OA@QTJ3!DB_>F#%CQC@8,V;_#(HQ#L:,J3`&4(4*@"I4<.9L +MS)@Q8YQ5V%*API8*6[9LJ3`FGH,1GD9<(]4M31HL6+1HV;?OFK1HFS;A0S,` +M#T!R?*#X\\?-7X``-0+X\U?#7XT:-6K4J%&C1HT``=J0^S,@RX`L`YHT:8*G +M28ME>/`T:=$$3Q,\3?`T,6*D3AT.0GSY\J7"W`$5*EC9>:*G6")O1&+%BA6+ +M"!$(2CZ0.43/&@$OU7#DDQ,O"B!LSK`Y0.%IQ`A==(X=.X;"$R8'SL9$B1(/ +MDP-GSBHXJ^"LPI@Q\3QAFI"?`0,&#!CPYT:3)DV:-&G2I,F")G@6-&G2 +MI(D13D/J"@\C8!'3<2Q8P@<.'#@`!.&?%'&8!HSQIDS9\Z>/,7H +MEB8-%BU:]JW`=LU8&65-;H2X$6)`"W)\`D`)$"!`@``!`M0(X*]&C1HU`@0( +M$*#-!7)__OSY\^?/GS\W-#1I@J<)GB9XFN!IT@1/DR:%C-3A`%"($`Z^5'`P +M=\"<.16LP(S3,RF1B4_>8A&)!0$"A`^JUDDPQ8("!6M7>,'!<2P?ABCQQF"+ +M%\\!G1'4J*$XAL*!`P>8QN3#D2_>F#%CQCASY@P3)D^>''CRY`#%/&Q+YF'( +MER]&FGSS`%6H``@0("WY`(T9$T6+%D`5*HP!%*7_`J`*8\:@&#-FS)@*%;"- +M`30&T)@Q8\:,&3/&684*6RILJ;"EPI8*%<;$\^0)79IN:=)HT;)OWXIYU]@I +M:X+GQHT;^&X,.$*.3X```0($"!`@0(`:W&H$"!`@0(``;=JTN7#ASY\C%_Y< +MN*#AQHTF39HT:=($3Y,%39K@P6.DS@XA'(2HX*#"W`%SYEC9`<-HG(USDUP- +M,V'"V[!A?HI]`+A.PHX=)%A4Z='CR@,X<'#$P!`E2I0Q\1R@D#-BQ(@1*%#$ +M0^$`4Y08^>(Y&#-F3(4Q8\8X<.")V@@'7^*-<+#$P;QK^;#$P!`/6Q1`4;1@ +MR(=E#"9G%0`!`E2A`J`*_Q4J5!@S9DR\,6/&C!E380R@,8#&5!CCS,&8,6.< +M.:M0H4*%"A6V5*@P9LP8!^A0X$B3!HN6?2M6[+M6I(RR)BV:W+@1(LN`/^3: +M\&D3($"```$"U`A0(T"-``$"!&C3IDV;"Q>.7+A`CMP%!76D"!'"P1<'%>;,F3.G@A482)#$Z;$Q:=*D1(DFE2M6K)2X5V9V +M;"-19UN5'CW^/<`!!T>,?/FB5(@W)MXQ!R-&`/0T`H4#%/$4*!8(0G=.CFS;L6(T:^+TL<.,`6)4H40%'&.,,&"-"6+5LJ +M5/^H4,&9LPK.XHV)-V9,A0H5*E2H4*%"!6?.QHP9,V9,!6=;*E2H4&%+A0H5 +MQCAPX"D?CC3YYFG9MV*%EFOLTC71T*>)AA`A0F1I<80.>&$X+ABSH4>:.EP/#ERKEV3@P*3@S'.G%6HX`P0H#F``&W9LF7_"Z`*6[94J#!FS)@Q +M\;"-P59A3(4Q%2I4&.-LC(,Q8\8XJU"A0H4*%;94J#!F#"84F&)TPX)!BY85 +M*U9H<>*#QXT;-YK<"'$#7Y8!+Z*OA!DS=>IP6K!@09@P!.Z(\'*L&AQ2.'`-@Q`@Z(U"@0(%BQ(@S3E#(D2-'CAP4 +M#AR,&;/%V18=<^;,V3)GRYPM_P!U;-FR98NS"F/&C(DW9DR%"A4J5*@P9LR8 +M,0[&C!DS9LR8,14J5*A0H4*%"F/&C'&`#4<,+%JTK%BQ;]\U:0QXA`AQXT:( +M$/AN9+G1X@^Y-FW:!`C0)D"``#4"!`@0H$V`-FW:M&G3I@VY-N3:M&FS)P0: +M-!K0-&FRK$D3/'B&U)$B10H'-N8.'#A@SIP*5JS`@`'#Z`FC;T\8?7NB[XD^ +M?;!*F!%2AP0>3G@6+"A#H)87$0^J58-#BA2.8W+R><(TPH&G$2-&.'#@P($# +M!PX<.!@S9LP8!PX<.!@Q8L0(.BB6C!CAR0D*!'(0H!CAR<&8,5NV;)DS9\N< +M.3ITZ/_0H4/'ECE;*E3`-F;,F#%CL%48LV5,A0ICQC@;,\;!&(`.QHP9,Z9" +MA0H5*E08,V8,)@?YTF#1HD7+OA7[M'R)QF/7K@@A0H3`AP_?C2/D)I#CTZ9- +MFS8!`@0($"!`@`!M`@1HTR9`FS;DVK3ATZ9-FS81]NQ!@^:&AAM-FC3!PZE. +MG1ULI+`1=N#``7/FS*E@90<,&#!@8(%Y`NN)G2>P2M@I`Q8M6IP2,&!@^.8`T\C1HP8X<"!`P?Q'#APX"">`T]C'(QQX&#$ +M"$^>1GAR,`(%"A0.4*!`@0(%"D\.'(QQ5F'+G"U;=,S1H4/_APX=.G3,V3(' +M4`5L8\;$&S.FPI@*%2I4<%9AC`-,8\8X&#-FS)@QSL8X&S-FS)@Q8QR,21,# +MRSXM^_:MV'?-"4`&/$*LB1`A0H@0(?"UX`.%#Y\V;=JT"1`@0(```6H$"!`@ +M0(`V`=JT:=.&3YLVY-H$"+!KUYX0(="@N=&D21,\G,34X2"%S8$#JPX<.&!. +M!2L[=NS8`0,&#"P[8.S8L5/)3B58E/`L6$!`1`HYQXY5@U,- +M#APX<'`X&.%@Q(@1(T:,<#`&DP,'#AR,P.3``28'#AR,<#!BA(,1(QR,<(`" +MA0,4#E"@<.#`V9@*6[9LT;%ECHXM_W/FS-$Q9XZ.+8``C1DSQL&8,8"P51A3 +MH4(%0&.!01$($!P+$:U:M6JP8$#!\>($2-&C!@Q +MPH$#!P[&.'#@P(&#$0X<.'#@P($#!R@.'3MV[-BQ`\9.I025S.S8 +M-JK,`CQ'CBQ84$9$D2(QCAW#4>T8'!QPY#CP-&+$"`3`@0,'#AR,<>#`@0,'*%"@ +M<.`@2@PL6E;LF[-BQ;4IZ7ALVK4K0H0($?"18"!@,ORU:=,F0(``-6H$ +MJ!$@0(``;0+P"1"@#9\V`0+P"1`@0(`U:];LVK4G1`@T:/KTX<2)D[`#G%:M +M.F!.A0I6K.R`867'CAT[=NS8`DQ9$%86J) +MD'/M6(QJ<'#@D",GW@@'(QR,<##"@0,'F!PX<.!@Q(@1#E#$B^?`P0@'#D8X +M<.#`@2<'#AR,B11!VX,`!(T>.+%C60X07!-?D`(R!`P<.%/$\ +M>4+A8(0#%`X<.!B#"9,#!RA&C!@Q`H4<.2@<.'#@P,&($9X<.'#@P($#!PX< +MC!E3`1`@0("VS/^IL*5"A0J`*@"JL`50A0ICQHS!Y@#;&&QC`%6H4*$"H`IC +MQCASX,"!`P<.'#APX&#$B!$CZ#AP`"@?%BW[]JW8ART;*@8A-NS9M6G3)GPW +MR)%A%BP8,RNG_`6XT*9-@!HU`M0($"!`@`!M`O`)$*!-FP!M`@0($"!`C35K +MUJQ9LVO/KCUHT/0IY,$#IP,>#I@SI\*.'3!@P-AAQ.'3N5 +MS)BYM6/(O04+\-S#`,J)XLF!@Q$.1CAP,,*!)P<.QL0;,V9,O"A1`%68`VC_RY8* +M@,:,&0,(4`5`@``!PC9FS!@'8["-P58!&R!`@`!5`(1MC`,'#AR,<#!BA(,1 +M(T:,&#$"!0I/,;!HV;=BQ8I]6%`IVQ1BSZ9=FS9%R'+!GQ5FP9C)D(&,SX4+ +M;0($"%`C0(```0*T:1,@0)L`;0($"!"@38``-6K46+,&P)HU:W;MV;,'S:\^ +M'CAYX'1`&!L5=EB!`0/&CAU6=EC9L6/'CAT[=BK9J23$S*T==>YQPH/G'IX% +M]_#<"Q.&0"T13)`1T'=$:,<.!`3KP1 +M#AR,&.'`P0@'#AQ@:/7OV_"K4QX.'`YS8L%%A!PP8 +M,';`V+&C@A4K.PG`V+%CQTXE.S2$;*M#XAZ>>WCPW%NPX-X]$@O*W$$@!P,& +M0&/&C!DS9LP8!PXL1, +MA@L^`P8,N$"N38```0($:!.@39L``0($".`O0(```0($J%&C08,($7;MVA4A +M0H0]>_"A^=6G3Q\C'CC5X:#"#A@P3\#8L6-'B`HS9NR8J61&R*UM.^K<6X!G +M`9Y[>.[A67!O09@P9>Z(0(!B3`5G8YR-<39FS!@'#APX&#-FS)@1(ZB-&#'" +MP0@'^5`X<.!IQ(@1#D8X<##"@0-,F)R-&1-ES)@*_X```1HS9E^4;CABQ'.` +M:4R\,6/&C'&&K<(80&,``1H#:$P%0!4`C<'F`,6($2/@P1L!#QX\>/#@P:-& +M;4D:#%JBS+MF3!J!93?0W,`7`A^^`4?X2'#Q3H85*RZ@M,@R`."`(VW:!`@0 +M($"``&T"!`@0((`_?P$"!*@1H$:-&@T:U`@1(<*>/7OV[`F!#TV6&WWZ],'3 +M@I,8*4+,V`%C!XP=5D*$"%$AQ(P0,T)N[:@SY-Z">POP++B'!\^]!??"+.A! +MX`X=.@Z<.1LS9HRS,<[&C''@P($#!PX<.!@Q`AZU$0Y&.(B7+YX#%".HP1LQ +MPM.($0X<.!@3;\R8>(#&5/\8@PW0&$`88N!((\>!)P/'CPX,&#!P\>O`PCY*3!H&7>-6DBF%IW=(T8@N2I4LOT)LVA3B0H!'[USX +M@R+!!9\C-[+@PY=EP!%R;0($"!`@0(```0($"!`@@+\:-6K4J%&C1H,J@ +M"8$F"YH;:/#=N''CQHT^35JTP-."$Z#HSP@$*%&/&`!HS9@RV"F,`C0$T!A"@,8#&`!H#:,P8!RA&C(`'#QZ\#!G@ +M9:W.ASH\F-)C>: +MM,#3!`\>/'CP/`ON+;BWX-X1$@O* +M``S3H]:=.[K@P?/DP)FS,6/&C!GCP,$8!PX<.'#@P(&#$2/@4:,V8H0G!PX< +MQ(N'@@XU.2A0H(@7+]Z8,14`5?\8,V9,/!0H1GBBYFD$G1$.4&##!F@,H#&` +MQE3`-F8,(&=CG(T9,P;0&$!CL&%#@6($'6KP,F3(D$%`A@PGD@@042U;$1'2 +M[A"XTZ-'E1;X\+4(((.9E4?(VAPYTN(&/GPA\.T)@2_+D0MM`@2H$2!`@``! +M_`4(X"]`C1HU:M2HT:!!@P8U`C1ITN1&DR9-;C1ITJ1)DQ9-\"QH@F-6KPZ(P8X*-03%BQ`AJ(^B,H.,`!;8Q8RH`JC"F`K8Q@,9@&S,&VQA` +MV,9@&X-M##8'=$;`@Z/7I4:?&'G#\9 +MS&2X:$/NR(`;62)$B!!BSQY\^+*T(,?'7X```6H$"!"@1H`:`6H$J%&C1HT& +M#1HT"!"@38LF>)HTP=,$3Y,6+?#@:8('#YY[>/`LX'1O`:=[0^[=XX2GB1$\ +M??KTZ=.D#YX6>!;@N7?O'AX2]\+4$J&+#ATZ(^!Y&N'`P1@'8\:,<>#,@8,Q +M#AR,<>#``9T1\*A1@S=B!!T'GAPX0"$GWA@'SAR,&1.O`J`*_P#'.,,V!EL\ +M3R.H4:,&;\0(%"A0C!E3H0*@,8#&5!@SIL*8,8"PC<$V9LP8;&.6H$`Q`AZU +M#!DR9,B0)$.2)-&BZ1(A0H2N.P1Z].C1@T"5"5!<,&,FP]^1+`.R9,$7(<*N +M/2'P10BQ)\L?!9SP<+J'A],"/`OPX,'3I,^-&TWZ-&G2H@4> +M/'CPD""Q($RM6M*+I&C!@QPI,#!PX/'CP1HQ`@2(> +MMC&`*E0`5&$,((`5L`$:,V;,F#'8QHQ9L@2%DQ'PJ&7(D"%#A@P9DIR(5B^) +MCSMW[MPA0(``@1X]>E0Y)(,9,Q=06N"+@`\?OA`1]H2(L&?/GCWXLK0@Q\=? +MC1H!:@2H42-`C1H!:M2H4:-!C08-:@1H<^$"G@5X\.!9@`O7OW[MW#<^\>'CQ-^MSH<^-&GSY]FK1H@0?/D7L+PM3R(L*) +M@S$.'(P8,8*.`P=C'(QQX,"!`P<.'#APX,#!"#KP,@C(`$\7O!$C'(QP@,(! +MH#%CG(T9XVS_S)@*8P!A&X/)TPAX\.#!@P>/VH@1#N*-&8.M0H4*@"J,J3`F +MWI@Q\<8LP;9DR1(4=$;`HY9!0(8,&:(ER9`D&L`329+XN*.+P!T"!,+T"-.C +M1Q4)+JA`.7(#WYH($2+@V[,G0H1=(?9$V(,ORQ]R?/SYJU&C1H`:-6K4"%"C +M1HT:-1HT:%`C0)L`;2[@P;,`SP(\>!;@N8<'SST\]^[=PW,/S[TC]^[=PW,/ +M#YY[>.[AP8.G29,;(6Z@N7'C1I\^+5JTP--D0:U_(N2@P#;&@0-X=."-&./` +M@8,Q#L8X&./`P1@'#AS0&0$/7@8!&>#1&3%BA"<'#L94J`!H#"!L_]BPC1F# +M#=N8)9ZHP8,';P0\>/#@41LQ`L48;&.P`:H`J$*%>!7&Q!L3#T4\%`Z6T!DQ +M`AXU`1DR9#@1+4.T:-&21*L7K`>-'M"[(H0(D*$/?BRM"`7P%^-`#5JU*A1HT:-`#5JU&C0H$&#&@$"M&G3 +MYL(]/'CNX;F'YQZ>>WCNW;N'Y]Z]>R3NW;MW#P^)>WA(W+M'XAZ>>WA:]+EQ +M`\T--%ENW+CQJT^?)DT6A"%PY]H\;&/&.*!#!YX#!P[&.'#@P($#!PX<.'#@ +MP,$(>/#@94B2P8>N$2,\><+D8`RV"H"B8/^+APT;)G1+EHP8X0G>"'BZ,NB" +M!P\>/&HC/#EP$&\,H#$5L`$:$R5>O'CQ'*!8XH0./'@9,F3(D"%#M`S1HD5+ +M$BU)O70G"!`@4(9`#P(]PA#H0:#*O18#\.&+@"\"O@A[T/P*L2="A#T1(H2( +MD*4%N3;^:OBK42-`C1HU:M2H`;!&@P8-:M0($*!-@`!M+N"Y=^_>/3SW[N&Y +M=P_//3SW[MTC@><>GGMX[MW#<^_>/3SW\-S#LP!/BR8W;J"YD07-KU\W?MWH +M!@$9X&48 +M06>$`P<.X@$"A&W_WA('GCQY&H%NQ`AJ\.!ER)!!EZX,\.#!@S?"TP@'#N+% +M`S0FRIAX8\;$0X$"A9,1(^!1RY!!0(9H&9*HEB5:&@(\R!'H0 +M"$.@1X\>!'JTN!$!'SY\^-:LV?/K1A8T(2+L"K%GUYX(6?Z0X^.O1H`:-6K4 +MJ%$C0(T:-1HT:%"C1ILV;0*T:7/AWCT\]_#.[AP7/C1A8T:-#@0Y-E3Y\;:+(TT5#FWS$Y\^+% +M0^'`@2<'#APX<.!@C`,'#APX<.#`P8@1\.!E$)`A`[P1\#`Y/`R9,@0+4.&#!DR9-#E0Q<\>-3@41LQPL&8>/'&Q(L7#T4\%"A& +M4*-&30"J)!F21(L6+5JT:-&B18M6+TFZ$P1\A/%!(`R!'@3"$"!`H$J3`5EN +M9(D0`5^$7YQ:],$7(D($?!'V[(F0I06Y`/[\!:@1H$:-&C5JU*C1H$&#!@': +M!`@0($"`-A?NX;EW[QZ>>_?NW<-S#\^]>WCN<;J'YQZ>>_?NW;MW[]X]//?N +MW<-S#P^>/C=N`,R2!0V^+&CPH<&'[\8-#"@<.'#@P($#!PX< +M.'#@P($#!PX!BBQ/^;AV+$"'BH4,%#E2%#AF@G +M3IS(D"&#CPP9,F3(``\>O!$C1M!QX"`>BG@H4*"@,P(>/'@",F3(<")#M`PG +MHD6+5B]:O7I)ZD7+0,!'F3`$RA`@0(!`#P)A>K1H<:3%`'P1?@$[/3SW +M[MW#O2'WAMR[=^\>GGMX[MV[=^_>O7MX[N%IT>0&&C19 +MT.#[]0O?GBPW-H7H84U$BF/YXD6)-V:$@Q$.`(YP,,+!"`<.'#APX,"!)T^> +MJ%$3(`#>"!3QY,2+$B__'@H43N"A0N7#AX\3/DZ<.''B1+1H&:*=.)'A1(8, +M&3)0RP`/WH@1(^@XH#."S@AXU.`)R(`J0Y(3T:)%BQ8M6K1ZT>I%JU/T[U[]^[=NT?BWCT2>.[=NT<"SX(6>&[[+@0Y/%TK(> +MM7P@.)8O'X8H\1PX&.%@A`,'#AR@<(`"!0H4*%"@0$&'C@@4"!#(D1-%3KQX +M_P#CQ9,V`AX\'SY\E#EQXL0)92>BG4@2+5J&:-&BG"/@4:.604"&#$DR1#L1+5JT),JB18NF+%J]>O7JE?'AXT29,@0($"!`@$"/ +M'E4.29#`YTB6+,#(,3G2(DN6$/A"[-JS:\\>?%E:D&OCKX:_&C5JU*A1HT:# +M!C5J!&C3IDV```':M&ESX=X]//?NW<-S[]Z]>_?NW;O'Z=Z](??NW;MW[]Z1 +M>_?NW;MWC\2]>_=(X,&#ITF?&VC0H,$7(@N:&R'J]:@%3P`=!#B.88@G)QX* +M%`Y0H$"!0DX\.?'BR8D73TX^.7+D()`C1TZ\>/'BQ?^+%^\+"CKP?&3PX>/$ +MB1,G3IQ0%BU:M&C1HD4[$2U)-(#1HB7)D"$:J@P9J&6@EH%:!G@9,B3)$"U: +MM&C1HD6+ED19M'K1ZM5+5R])F3)ERI0I0X```0($"(2I4H7%A",#!@PX0H[/ +MGP%9\(7`AR]"A`@1(H3`AV\`N0#^_`6H42-`C1HU&C1H4"-`FS8!`@0($"!` +MFS87[MV[=P_/O7OW[MV[=^_>/1+WAMR[=^_>O7M'2-R[=^_>O7OW2-R[1^(> +MB7MX\#1I'$'6D"1M!!@`/'L7PQY,A!@0(%BG@HY*"()R>> +MG'ARYL63$P^%'!3QXL6+%P7_6Y1X\>;1<0)/EX\3)WR<.'$B6K03T4Y$BQ8M +M6K03T4Y$BW8B6K1HT9)DR)`A0X8,\#)D2)(A0[1HT4XDB98D"HEJ1>M +M7KUZ]925.5&F3)DP!`@0($"@1X\%>/!DR9)E`+DVY(ZTR((/'SY\$2)LBK!K +MSYX(65H<:1/`7XT:-6K4J-&@08,:`0*T:1,@0(```0)`NW#A'IY[]^[=PW/O +M'IXC]^[=NW?OR+U[8NX=N7?O'@D2).X=N7?OWKU[]TC3$BR<' +M4!1`_U'BC1F#(IZ#$?#@^_?ND;AW[]Z1>_?NW;MW +M[QZ)>R1(W+M'XMZ]>R3NW;MWC\2]>_<6X&G2Y,:-$"'PA=`0AITN:E^<.!E! +M)\4Q.0A0H$"!`@4*%`Y0H$`1#T4\%/&P88L7+UZ\>-CB`?^*-P90O'CQ4*"# +M-T)7AA,93D3+D"1#DFC1HD6+%BU:M&C1ZM6+IBQ:O6CUHIU($BU)DFC1DD3+ +M$.U$M&C1HD6+5B])O23UTB6I5R]=/67*PI0I4R8,@3)E"!`HLZ`*GAM9!OR9 +M0.[(GS\#\.&+$`%?B#T1]H2($"$$O@@#CI"#`C"`OQHU:M2HT:!&C0!MV@0( +MT"9`@``!VK2Y<.$>GGOW[MV[AT?,O7OW[MV[=^_>/1+W[MV[=^\>"3PD[I&X +M=^_>/1+W[MV[=P_//3PMFMRX$>)&"`U5KEPQ)H*.$VE?4'Q!\`4%"A0H4*!` +M@8(."A0H4*"(ARU>O'CQYL6+%R7_7KQX\>)ABQM7KUH]>K5 +MJUK5JU>F3)@R9O!3D^_OS5J%&C1H,&-=H$:-.F39L``=H$:-.FS84_]^[A +M`7COWI%[)/#.[=(W&/Q+U[]^[=NW>/!(E[1\20 +M($'B'IXF-VZ$"+%@09D3/MB)$"%"A`AI(A!(<[($!0H4=%"@H(,"1;PE\;#- +MBSM'J1:M7KUZ2>O72U4M7KUZZ>B<6 +ME`E3AD`9`@3*A`E#@@0)_?NW;MW[]Z]>_?P +MW+MW[]Z](_?NW2-!XMX]$O?N`21QC\2">_=(D"!Q[]Z$'2QV3*B"IT6($"$T +M6`I1KUZ]:"=\$&!WQXL(:72DH8CG``4*%"CDH)@7+UX\;/'BQ?^+%R]>O'CQ +MXL6+%R\>"CHC4`F(%NW$"64GHD6+%BU#M&C1HIV(%JU>M&C1HD6+%BU:M&C1 +MHM6K%ZU>M&CUHM6+5J]>O6CIZM5+5R]=O7J6TEFJMXQ`F3)E"!`@4"9,F##W +M2$R80.[/@`$#!@S(,B`+O@@1(NR)$"'"G@@1]NS!%V+`D39\`M2H4:-!#6X! +MVK1ITZ9-FS8!V@1HTZ;-A3_W\-S#<^_>O7OW[AW!<^_>O7OW[MV[=^_(O7OW +M[I&X=X_$O7M5[MV[=^_>$#'W=IAZ14:"*3YX6F0)@6]3"`TA`&[:9,F2)0W* +MRA"X(T*:$Q3Q4*!`$0]%O"_QXL6+%R__WKQX\^+%BXI%JQ>M7K1H]:+5BZ8L6KUH +M]:+5JUI7KIZ)\J4(5"&0!@"8<)4N;?@WI$C`P;"1)5[ +M]TC4V6'JU;I%JJBL<\/BR(T;64)D07/C1H@0NS9MVL1`69D[NJ1]0;$D7KQX +M\>+%BQ=O7KQX_P#CQ8N'(AX*%"A0H(B'(AX*%'3@PO7JI4M7+UT] +M2^DL6:IWH@R!,@3"$`@S:L&"!2U:M&B1!1\^?/CP9 +M-7LB1(B`[\8`<@'\U4!6HP:W-A?:M&G3IDV;`&W:M&G3YL*%/WCNW;MW[]X] +M,7CNW;MW[]X]$O?NW;MW[]X]$O?ND;AW[QZ)>_?ND1A"HHZI5XL^E$ODIURY +M#^M,D;B1!0V^+'OP[=F##PT^-+M":#AQQPL")_-0Q/L2+QZ*>/.6S/^+-P]% +MO'@HY*"(AP(%"A0HQJ"@0P=5AA,GHIV(%NU$$H#1HD6+%BU:M&CUHD6K%RV: +MLFC1HM6+5B]:NFCUZD6K5Z]>O7KUZM6K5R]=O7KI+-5+9RF=)4LGRI0A4(9` +MF`5A[BW`TZ=/'WSX(D18$R'"'GSXLJ#)@@\?O@@1]JS9LRM"A!#XLK0@QR=` +MC08U:@2XT.9"FS9MVK1ITZ9-FS9M+OSY<^\>'C'W[AVY1^(>GB/W[N$Y +MD7OWCMR[1^+>/1+W2-R[=T_,/3$33"WZ4,[$IQDO/GD;YB>0A"IX;J#!E^77 +MKSU[]D2($"+$)DMEV'DI@@#!EWGSXL6+%R__7KQX\>+%0Q$O'@H4*%"@0!$/ +M!0H4=.!ER!#M1+03T:*=B!8M6K1HT:)%BQ8M6K1H]:)%JQ>M7K1ZT>K5JQ>M +M'L!Z]:+5JU>O7KIZZ>JELY3.4CU+EM(QL'2BC`\"8<*$6;#@7HL^-[+@B[`F +M0H0U:]9$B+!G3Q9\O_#ABQ!A380U$?9$B!`A2XL+;?S5J%$C0)L+%]I<:-.F +M39LV;=JT:=/FPH4!1_#0/DS0QPB`Q](+.CQ8TL:++@0Q,B1(A=>_9LVF2I +MS+\K7KP@0"!G7A1L__'BS5LR;TF\>/'BH8B'`@4*%/'B.4!!1Q>\)">BG8@6 +M[42T#-&B18L6+5JT>M&BU8L6+5JT:,JBU8M6KUZ]>O7JU:M7KUZ]>O7JU:M7 +MKYZE=)8LI;-DR9(E964(E"$0!N"">PM:H,&'!M^:"'O61(@084V$-1'P[?GU +MZQ<^?/C6K(FP9E>$""'P#3C2QE^-&C7:M+EPH4V;"VW:M&G3IDV;-FTN_!EP +MC\21>T?N';EW[]Z](_?NW1-S[]Z](_=(D+A'XMX]$B1(D+AW3\R.5\7*?9KQ +M!@@0($"``'G3Q9&A2%1,X;F1!0V:+"$V;0JQ!\VN3DB78YL5;LB0>BG@H4*!`$2\>"A0CZ&3($.W$B6@GHD4[$2U:M"31ZD6+ +M%JU>M&CUHM6+IBR:LGKUHM5+5Z]>O7KUZM5+EZY>O7KI+*6S9*F>)08,&%B* +M5H9`F04+1N&Y@08-/GP1]D2($&%7A%T1UD18$R$"OE^_\.'#!W#-FC5K(NR) +M$`%?EB-M_-7P%Z#-A0L7+EQHO7OWCMR[ +M=^_(O7OW[MV[1^+>/1+W2)"X=^\>B7MBZIA:5.X3/R!`@``!`@0($"`S9L2" +M\(.*J2,W;H0($2+$IA"[-O0Q4F==)$2(^N7Q4@3_P;QX*%!\F8=BR9)X8Y9@ +M0X$B'@H4\<8XH",-7H8,&4Y$.Q$M6K1HT:)%BQ8M2;1ZT:+5BQ9-6;1HRNI% +MJU>O7KUZ]>K5JU?/4KUZ]>K5JV>IGJ5T#"PQ8&")`0-E9W;MV15A380U:R+@VX/O%[X]$=:L6;-K5X0($08,/68T`;2Y< +MN-#FPH4V%]JT`=CF0ILVT/[\^77DWI%[1^Z)N7?DWCTQ]^[=.W+OWI%[]TB0 +MN$?BWCT2)$C<(R%FAYMBKEX``0($"!`@0(```0($2"P+1()1D7"D1980(="@ +M01.BSX(=ZSX,^S3CS8Q4___H2)-S#0$*%"CBH8BW!`4V%/%0.(CG(!X*%'3H +M9,@0[<2):">413L1+5JT>M'J18L6+5JT>M&B*:L735F]>O7JU:MGJ9ZE>I;J +M6:I7KUZ]>O4L6;)DB0$#2Y886%)69D&8!4U"A-@5(4*$"'OV1(BP9\V>-7O6 +M1(@0(0*^/?CP_<*W)\*:-6O61(@0(_?NW;MW[]Z]>_?NW;MWY-Z](_?N`;Q'XMX]$O=(D+A'XAX)$B3, +M+"IGXH4F($"```$"!`@0($"`S.!GH=4/&5".W,ARXP8:-&B&F%KW(9&)&3.` +M`/_ITBF.%R?21""0A@+!ER5+4#B(YP`%"A1C4*!`0<<)J@P93D0[<2):M&C1 +MHD6+%BU:M'K1ZD6+IBQ:O1/UZM6K5\]2.DOU+-6S5,]2/4O*+-6S5*]>.DOI +M+#&PQ("!I66C%BQ#LRE$A`@1UD38LR9"A`B[]NR*$"'"F@@1UJS!AP\?OE^_ +M]D18LV97A%WXLI"#PH5+@`L7+ERX<.'"A0L7+K2Y`.T"M`O`?N$[D7OWQ-R[=^\>B7LD[I&X1^(>"1(D2)#8,8M8.5?\@``!`@0($"!` +M``(!`D03$$VQ++3Z084/GAM9T*!!P\G4HF)^3'29`>3_S8PW0&:DNG)'A`@O +M(NC008%B"0H4*%"@0($"!0H4=.!ER!`MVHEHRJ*=4!:M7K1H]:*EBQ8MVHEZ +MT>I%JU>O7KUZ]2S5LU3/4CU+&NI9LE3/DJ5ZEBQ9LF3)$@,&EGBD6["@"9I- +MFR)$B!`A0H0(>_:LB1!A380(:_9$B+`&7X0U^/#]VH-O3X0(:]:LB1#A!CDH +MR/RUN?#GPI\_?R[\N7"!'#ER;/Q#T2]TC<(T&"!(DZM&!)2O0"B"8@0(```0($"#\@0(```6*!B!)5 +M$H[M'JG:AWHEZT>O7J6:IGJ9ZE +M>I;J6;)4SY*E>I;JI;-DJ9ZE=`PL66)@R9*R!1K0;(JP*T*$-1$B[%D3(4*$ +M-6LB[%D380V^-1'61%B#;PV^/;_P18@0(<*:76L&,`$!`MJ%/W_^_+GPY\^? +M/Q?(76A##MJ%/[\BK#ER[]Z1>_?$W#MR[\B]>V+NW;MW3\P]$B3ND;A'@@0) +M$B2J#!&S8Q:Q2:[X`=$$!`@0($"`S`"B:0:0&3.(^(E$9D*+/BV.B'E5;%@7 +M<#/>`/\!`@0($"!`@`")U>G?G3LB1$BC@T(:"FDHZ"Q!@0(%'8`C4*'*$"W: +MB1/1E$4[42]:M'K1ZD6+%DU9M'K1ZM6K5Z]>/4OU+-6S9,E2/4N6+&FP5,^2 +MI7KU+"E39DF9)4O*EBE;%F+7FCU[=JW9%2'"F@AKUD2($&'-&GQK\*V)$"%" +MA#5K\*V)L`??'GP1(NQ:$V$`$S[0H/WY\^?/GS]__ORY0.X".7+0+EP8L&<- +M@'M'[MT[B7LD[I$@48>$F#H[S'1(9(L? +M$"!`@``!`@0($"!`@``!,L,1A`\26.#Q<&0'+6(_3'1Y`^3_S1L@0(```0($ +M"!`@,Q!1(G#G#AUITE#004$'!1T47^@X@9I%JYI9JF>IGH9ZENI9LE3/4CU+ENK5TU#/DC)ERI1IL+2@ +MQX(F>W9%B!!A380]:]9$6+,FPIH(:]9$6!-AS9HU$=9$6!-A#;XU>_;\VK,G +MPIHU$?HP80+MSY\!?_[\^?/GSY\_%RZ0NT".W)\!$=8`('%/S#TQ]X[<.W)/ +MS)%[8NZ)N7=/S#T2)$B0P$."Q(0A1W:8>H6$6*)/_(```0($"!`@0(```0($ +M"!`@0&(1^>&BRI$C.V:Y*9;HQ9LW_T"```$"!`@0($"```$"!,B,0;5\B)!& +MAPZ*+RA0T$%!1YH(7:A.G#AQXL2):">B18L6K5ZT=-'J):D7K5Z]:/72U:MG +MJ9ZE>I;J6;)4SU(]2_4L64IGJ5Z]>AKJ:="P#*"&>U58F-(0(4*$-1$BK(D0 +M(<*:"+O6[(JP)L*:-6LBK,&W9DV$-6O6K(D0(<(>?/CPX<,7(V+N';DGYAZ)>T?ND;AWY!Z)>T?ND1A" +M8@@)$B1(D"!1AQ8L8I-O/\!`@0($"!`@``!`@0($"!`@`"9T8R2CSO2$$BC0X>.-#IT1.C2 +MYNGJ6ZM6S5,]2/4N6+-6S +M5,]2O7KUZFFHIT&9,@W+FE39<B7M#2)`@08*$F`D[7A&; +M%.0-$"!`@``!`@0($"!`^`'A!P3(#""QO"EA)F'"!%JSJ!!K]6G_!A`@0(`` +M`0($"!`@0(```0($"!`@0!`-\G'G#CPZ"!#004$'`1U=/C+X.''BQ(D3T:)% +MJZ>L7K1Z]>I%JQ>M7KUZ]>K5JU?/4KUZENI92F>IGJ5ZEI35TU#/DC)E&I1I +M:+)@`0E3$DRAB1`APIH(:R*LB1!A380U:R*LB;!F380U:R*L61-AS9HU:]:L +MB1!AS9X]>_#AV_.KSP!\^+(,`#C@#[`_`_X,&/#G"#DF%X#]PK=F#0`2).Z) +MN2>&Q+TC]TC<.W*/!(E[8NZ)N4>"!`D2)$B0F"!D4;E$+X```0($"!`@0(`` +M`3*#'S]^0/@!F<&/B!)55"1(<*.JG))/_R^```$"!`@0($"```$"!`@0($"` +MO'D#!,@,0Y1\W*DE@@X=.BBDT=$%#Q6J$R>4G5"F[(2R:,JB*8M63UF]>O7J +MU:M7KYZE>O7JU;-4KYXE99;J6;)4SY(E91HL:="@K(F&92WND3`E8<*>-1'6 +M1(BP)L*:"&LBK(FP9DV$-6O6K%FS9DV$-6O6K%FS)L*:-6LBK%D38<\>?/A^ +MX8N`#]^O`0.``0,V8,"`(Q>87!#SY]>:-0``'+DGYMZ1>V+N`21Q3\R1>R3$ +MW#MR[]X0$D-(D"!!8L*$':8Z3'+%#P@0($"```$"!`B0&?PL6)AA808_?K&\ +M*?'SX<.'*$,F4GEBE3IDR9,F7*E"E3IJR>AGJ6+"FK5Z]>O7KU +M+-6K5\^2)0V6-%C2H$&#,@U--#1ILNP>"5.F@$6($&%-A#41UD18$V%-A#41 +MUJQ9$V%-A#41UJQ9LV;-FC5KUJR)L&;-F@AK(N"+L`??G@@1\.'[-6#``&!_ +M@`'[PX0)DR/`?JU9`P#`/1+WCI`@<>_(/3'W2-P[K52U?/4CU+EBPILZ1!F08- +MRIHT:=*D29,F+4A,,$7K%[XU$2)$6!-A380U$=9$6!-A380U:]:L6;-FS9HU +M:]:L6;-FS9HU$2*L6;,FPIHU:_!%P(O7J6;*D3(,E#1HT:+C19-F"%LN:-&G1@L0$ +M/B0BX-L38-1'61(BP)L*:"&LBK%FS9LV:-6O6K%FS9LV:-6O6K%FS9LT: +M?&LBK(D0`=\>?/@BX(N`#]^O+`,&``-VA,D1#[_PK5D#`,"](_?$W#MR[PB) +M>T?NB;DGAL2]>V)(D!A"@@2)"23$B-GA1H^K%T"```$"!`@0($#XS7AA80:_ +M6!9F6.CB;=@P$UW>O/]Y\P8($"!`@``!`@0($"!`@``!`@0($"!`@``!`@0( +M$(!`@`"9$:N?M3MW[MRY(P)5!E0G3IPXH4S9,F7*3BA3IDR9,F7*E"E39DF9 +MLGKUZM6K9\E2/0V6-&C0H$%#"`TM\"QHT:))BQ8M)DR@]6?-G@@1]JS9$R%" +MA#41(JR)L&9-A#5KUJQ9LR;"FC5KUJQ9LV;-FC5K(JQ9$V%-A`AKUNS9@V\/ +MOC7X]N#+DJ4/,&!'F(CY\VL-@#5K`)"X)^;>D7LD[HDA08+$$1+WQ-PC<6\( +MB7LD2$P@P63"A!VS.DQRQ0\($"!`@``!`@3(#$W\^`'AQR_6#&_>AGES!.[_ +MS1L@0(```0($"!`@0(```0($"!`@0(```0($"!`@0(```0($"!`@,V)1JN7C +MSIT[/NXD.7$BV@EERI354Z9,&O7CUE&NIIT*!! +M0Y,0FRSM:G+CQHT6]_"T:-%B`A\2^"+@6Q-ASYH]:R)$B!`A0H0U$2*LB1!A +M380U:]9$6+-FS9HU:]:LB;!F380U:R*L6;,&WQY\OW[]VH,O0H0(^&X,`(;G +MR!$/OR*L6;,&P+TC]X[<$W/O"(E[8DB0N'>$A!@2]\20&$*"Q`028B8PH96@ +M0Z)/_(```0($"!`@0(```3*#7ZQ8L2Q8,.'-A(DN_S/>O`$"!`@0($"```$" +M!`@0($"```$"!`@0($"```$"!`@0($"```$"9,:,?M;"]"!`@$`9'R?**#NA +M3-D)9=&4*5.F3)DR9RA+C1 +MH@6>%B0F3,"390V^/7LB[(D0(4*$"!$B1(@0(4*$"&LB1%@3(<*:-6O6K%FS +M9LV:-6O6K%FS9LV:"&O61%BS9\^O7_CP1<"'+\LO8,#$`.OS*\*:-6O6B+E' +M@@2)>V+ND1!S[\@]$B3ND;A'XAX)$B3$D"`Q@0F3'4B()7(%!`@0($"```$" +M!`B_&?SX6;#@S9LW;R:Z=/\!]P8($"!`@``!`@0($"!`@``!`@0($"!`@``! +M`@0($"!`@``!`@0($"!`@``!$JL9O3!E"/0HL7OCT1\.'[!0P8,&"_(JQ9LV;-O2/WQ-P[0H+$$1(D2)`0 +M0T+,/3$DAI`80H($"28DF.Q@@J2#*U?\@``!`@0($"!`9@"9P<\"$6^MO'D; +M]JG_RYLW;X"\`0($"!`@0(```0($"!`@0(```0($"!`@0(```0($"!`@0(`` +M`0($"!`@0&;,0&1OV;)E)Y:56:;,4IEERI0MLV3)DC(-&I1IT&!)@P8-&C1H +MT*`A1),0+4C@N9'E1H@L^/#AN]&"Q(0)$_#@BX`/WYX]>_;LB;!GSYX]>_;L +MV;-G3X0($?9$V!,APIXU$2*L6;-FS9HU:]:L`;AFS9H(:]:L61-ASYY?OW[] +MPH/Q!`2)$A, +M.#*!"9,=LR1-R +MX,-W`Q^^$#=:3&`QH44(?'LB[-FS9\^>"'LB[-D384^$/7OV[-FS9\^>"!$B +M1(@08-6O6K%FS9LV:-6O6K%FS9LV:-1$B_/KUZ]O7Q'6 +M`%RS9LT],?=(W!-#@L0],22.D"!Q[PB)>R2&D"!!XL@$,1/$,&$RJX.K3_R` +M``$"!`@0($"```'"SX*W5DJ4#/\S`>X-$"!`@``!`@0($"!`@``!`@0($"!` +M@``!`@0($"!`@``!`@0($"!`@``!`@0($"!`W@`!`@0(D!F.B$0*1(_"O04+ +M-%@*H2&$!@T:-#31H*%)DR9-;C1I7&A`E' +M;J"Y@6;/GCU[]NS9LV=/A`A[]NS9LV?/GCU[]NS9LV?/GCT1]D2($`'?FC5K +MUJQ9LV;-FC5KUJQ9LV9-!'Q9?OW*D@4?OBR_?OWZ%0'?F@AK[MT[_;LV;-GSYX]>_;LV;-GSYX]>_;LV;-GSYX]$2)$B+!FS9HU:]:L6;-FS9H( +M:]:LP9?E5Y9?6;+@R_+KUR]\$2*L6;,&SY%[1^Z1(''O"`DQ),3<$T/BGA@2 +M0X[4(4'B"`DQ3)@P02+)U0L@0(```0($"!`@0(#$LN`-@A(__P#+^1GVZ0T0 +M($"```$"!`@0($"```$"!`@0($"```$"!`@0($"```$"!`@0($"```$"!`@0 +M($"```$"!`@0($"```$"!,B;&8[(+`MQ0T.3)DUN-&G2I$F3&TUNW+AQX\:- +M&\!:9,&7)7WM^[<&W9\^>/7OV[,&WY]>> +M/7OV[-FS9\^>/7OV[-FS9\^>"'LB1%BS9LV:-6O6K%FS9LV:"/BR_,J2)4N6 +M+%E^9?F%+T*$-1&.'#ER1,P1$B1('+EW[QZ)>R1(D"!!@L0],21(,#DRH8ZO +M#HI/&C1LWLMS(D@5?EALWLK1H<2-+ +M"SQ'6K1HT0)/BR8M;J!!$V+/GCU[]NS9LV8("3%,F-#JD,@5OS=`@``!`@3( +M#"`S+%CPIL3_SX_;L^84/WYX]^/;LV;/GUYX]>W[MV;/GUYY?OW[AVX-O +MSYX]>R+@RS+@SY\+?_X,^/4KRZ\!P(#]&9`ERYHU:XX<.7+D"(D)1TB0($&" +M!`D2)$B0($%"S)`C)$@``$"!`@0($"```$"!`@0($"```$"!`@0($"```$"!`@0($"```'R +MIHL)1S.```$"!`@0($"```$"!`@0($"``"%BZH:&&S>:W&ARX\:-&S=NW+C1 +M`N"-&UENW,B2Y4:6&RT&M&A!SM2$%C=NW+AQXT:+&RV:-+EQXT:($'M^[=FS +M!]^>/?CP[?FU9P^^/;_V[/FU9\^>7[_V_/JUY]>O7WM^[?FU!U^6+'\NM&ES +MX<^`7UGP_1H`[,\?8`-^K5FSYLB1(V*.,!$S0/&C1M9;MRX,>#&@!M96@QH +MT8(<'PDN_$WXT^+&C1LW;MQH`K!%BR8W;MSXA6;/GCU[]N#;@V_/KSU[]NS9 +ML^?7GCU[?NWYM>?7AE^_?NWYM6?/KSU[\&49\.?"A0L7_OSZA2]"EE]_//SY +M,P`?O@@1CAPY2>&!)B2!P1PV0'""0=$KG2 +M!`3(&WXS+'AKI430R8\/'_SX&=:ERYLW0(```0($"!`@0(```0($"!`@0(`` +M`0($"!`@0(```0($"!`@0(```0)DQHP9;X```0($"!`@0(```0($"!`@,X`` +MB67J1I,;36XTN='D1I,;-V[_;\VH-OSZ\]>_;\`KAGSYY?>W[] +JVO-KSZ\]>_;LV;-G#[X!?RY, 1996 +# +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A lot of this script is taken from autoconf-2.10. + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} +echo=echo +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec "$SHELL" "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null`} + case X$UNAME in + *-DOS) PATH_SEPARATOR=';' ;; + *) PATH_SEPARATOR=':' ;; + esac +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi + +if test "X${echo_test_string+set}" != "Xset"; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" != 'X\t' || + test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running ltconfig again with it. + ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}" + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf "%s\n"' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + # Cool, printf works + : + elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && + test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL" + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && + test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# The name of this program. +progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` + +# Constants: +PROGRAM=ltconfig +PACKAGE=libtool +VERSION=1.3.3 +TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)" +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5' +rm="rm -f" + +help="Try \`$progname --help' for more information." + +# Global variables: +default_ofile=libtool +can_build_shared=yes +enable_shared=yes +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +enable_static=yes +enable_fast_install=yes +enable_dlopen=unknown +enable_win32_dll=no +ltmain= +silent= +srcdir= +ac_config_guess= +ac_config_sub= +host= +nonopt= +ofile="$default_ofile" +verify_host=yes +with_gcc=no +with_gnu_ld=no +need_locks=yes +ac_ext=c +objext=o +libext=a +exeext= +cache_file= + +old_AR="$AR" +old_CC="$CC" +old_CFLAGS="$CFLAGS" +old_CPPFLAGS="$CPPFLAGS" +old_LDFLAGS="$LDFLAGS" +old_LD="$LD" +old_LN_S="$LN_S" +old_LIBS="$LIBS" +old_NM="$NM" +old_RANLIB="$RANLIB" +old_DLLTOOL="$DLLTOOL" +old_OBJDUMP="$OBJDUMP" +old_AS="$AS" + +# Parse the command line options. +args= +prev= +for option +do + case "$option" in + -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + eval "$prev=\$option" + prev= + continue + fi + + case "$option" in + --help) cat <&2 + echo "$help" 1>&2 + exit 1 + ;; + + *) + if test -z "$ltmain"; then + ltmain="$option" + elif test -z "$host"; then +# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 +# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then +# echo "$progname: warning \`$option' is not a valid host type" 1>&2 +# fi + host="$option" + else + echo "$progname: too many arguments" 1>&2 + echo "$help" 1>&2 + exit 1 + fi ;; + esac +done + +if test -z "$ltmain"; then + echo "$progname: you must specify a LTMAIN file" 1>&2 + echo "$help" 1>&2 + exit 1 +fi + +if test ! -f "$ltmain"; then + echo "$progname: \`$ltmain' does not exist" 1>&2 + echo "$help" 1>&2 + exit 1 +fi + +# Quote any args containing shell metacharacters. +ltconfig_args= +for arg +do + case "$arg" in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ltconfig_args="$ltconfig_args '$arg'" ;; + *) ltconfig_args="$ltconfig_args $arg" ;; + esac +done + +# A relevant subset of AC_INIT. + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 5 compiler messages saved in config.log +# 6 checking for... messages and results +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>>./config.log + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi + +if test -n "$cache_file" && test -r "$cache_file"; then + echo "loading cache $cache_file within ltconfig" + . $cache_file +fi + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + +if test -z "$srcdir"; then + # Assume the source directory is the same one as the path to LTMAIN. + srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'` + test "$srcdir" = "$ltmain" && srcdir=. +fi + +trap "$rm conftest*; exit 1" 1 2 15 +if test "$verify_host" = yes; then + # Check for config.guess and config.sub. + ac_aux_dir= + for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/config.guess; then + ac_aux_dir=$ac_dir + break + fi + done + if test -z "$ac_aux_dir"; then + echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 + echo "$help" 1>&2 + exit 1 + fi + ac_config_guess=$ac_aux_dir/config.guess + ac_config_sub=$ac_aux_dir/config.sub + + # Make sure we can run config.sub. + if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : + else + echo "$progname: cannot run $ac_config_sub" 1>&2 + echo "$help" 1>&2 + exit 1 + fi + + echo $ac_n "checking host system type""... $ac_c" 1>&6 + + host_alias=$host + case "$host_alias" in + "") + if host_alias=`$SHELL $ac_config_guess`; then : + else + echo "$progname: cannot guess host type; you must specify one" 1>&2 + echo "$help" 1>&2 + exit 1 + fi ;; + esac + host=`$SHELL $ac_config_sub $host_alias` + echo "$ac_t$host" 1>&6 + + # Make sure the host verified. + test -z "$host" && exit 1 + +elif test -z "$host"; then + echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 + echo "$help" 1>&2 + exit 1 +else + host_alias=$host +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case "$host_os" in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +case "$host_os" in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "${COLLECT_NAMES+set}" != set; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR cru $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +# Set a sane default for `AR'. +test -z "$AR" && AR=ar + +# Set a sane default for `OBJDUMP'. +test -z "$OBJDUMP" && OBJDUMP=objdump + +# If RANLIB is not set, then run the test. +if test "${RANLIB+set}" != "set"; then + result=no + + echo $ac_n "checking for ranlib... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then + RANLIB="ranlib" + result="ranlib" + break + fi + done + IFS="$save_ifs" + + echo "$ac_t$result" 1>&6 +fi + +if test -n "$RANLIB"; then + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" +fi + +# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin. +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$AS" && AS=as + +# Check to see if we are using GCC. +if test "$with_gcc" != yes || test -z "$CC"; then + # If CC is not set, then try to find GCC or a usable CC. + if test -z "$CC"; then + echo $ac_n "checking for gcc... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then + CC="gcc" + break + fi + done + IFS="$save_ifs" + + if test -n "$CC"; then + echo "$ac_t$CC" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + fi + + # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". + if test -z "$CC"; then + echo $ac_n "checking for cc... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + cc_rejected=no + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/cc || test -f $dir/cc$ac_exeext; then + if test "$dir/cc" = "/usr/ucb/cc"; then + cc_rejected=yes + continue + fi + CC="cc" + break + fi + done + IFS="$save_ifs" + if test $cc_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same name, so the bogon will be chosen + # first if we set CC to just the name; use the full file name. + shift + set dummy "$dir/cc" "$@" + shift + CC="$@" + fi + fi + + if test -n "$CC"; then + echo "$ac_t$CC" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + + if test -z "$CC"; then + echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 + exit 1 + fi + fi + + # Now see if the compiler is really GCC. + with_gcc=no + echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 + echo "$progname:581: checking whether we are using GNU C" >&5 + + $rm conftest.c + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + with_gcc=yes + fi + $rm conftest.c + echo "$ac_t$with_gcc" 1>&6 +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="$2" + +echo $ac_n "checking for object suffix... $ac_c" 1>&6 +$rm conftest* +echo 'int i = 1;' > conftest.c +echo "$progname:603: checking for object suffix" >& 5 +if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + cat conftest.err 1>&5 + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 +fi +$rm conftest* +echo "$ac_t$objext" 1>&6 + +echo $ac_n "checking for executable suffix... $ac_c" 1>&6 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_exeext="no" + $rm conftest* + echo 'main () { return 0; }' > conftest.c + echo "$progname:629: checking for executable suffix" >& 5 + if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + for ac_file in conftest.*; do + case $ac_file in + *.c | *.err | *.$objext ) ;; + *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;; + esac + done + else + cat conftest.err 1>&5 + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + $rm conftest* +fi +if test "X$ac_cv_exeext" = Xno; then + exeext="" +else + exeext="$ac_cv_exeext" +fi +echo "$ac_t$ac_cv_exeext" 1>&6 + +echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 +pic_flag= +special_shlib_compile_flags= +wl= +link_static_flag= +no_builtin_flag= + +if test "$with_gcc" = yes; then + wl='-Wl,' + link_static_flag='-static' + + case "$host_os" in + beos* | irix5* | irix6* | osf3* | osf4*) + # PIC is the default for these OSes. + ;; + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # we not sure about C++ programs. + link_static_flag="$link_static_flag ${wl}-lC" + ;; + cygwin* | mingw* | os2*) + # We can build DLLs from non-PIC. + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + pic_flag='-m68020 -resident32 -malways-restore-a4' + ;; + sysv4*MP*) + if test -d /usr/nec; then + pic_flag=-Kconform_pic + fi + ;; + *) + pic_flag='-fPIC' + ;; + esac +else + # PORTME Check for PIC flags for the system compiler. + case "$host_os" in + aix3* | aix4*) + # All AIX code is PIC. + link_static_flag='-bnso -bI:/lib/syscalls.exp' + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better link_static_flag that works with the bundled CC? + wl='-Wl,' + link_static_flag="${wl}-a ${wl}archive" + pic_flag='+Z' + ;; + + irix5* | irix6*) + wl='-Wl,' + link_static_flag='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | os2*) + # We can build DLLs from non-PIC. + ;; + + osf3* | osf4*) + # All OSF/1 code is PIC. + wl='-Wl,' + link_static_flag='-non_shared' + ;; + + sco3.2v5*) + pic_flag='-Kpic' + link_static_flag='-dn' + special_shlib_compile_flags='-belf' + ;; + + solaris*) + pic_flag='-KPIC' + link_static_flag='-Bstatic' + wl='-Wl,' + ;; + + sunos4*) + pic_flag='-PIC' + link_static_flag='-Bstatic' + wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + pic_flag='-KPIC' + link_static_flag='-Bstatic' + wl='-Wl,' + ;; + + uts4*) + pic_flag='-pic' + link_static_flag='-Bstatic' + ;; + sysv4*MP*) + if test -d /usr/nec ;then + pic_flag='-Kconform_pic' + link_static_flag='-Bstatic' + fi + ;; + *) + can_build_shared=no + ;; + esac +fi + +if test -n "$pic_flag"; then + echo "$ac_t$pic_flag" 1>&6 + + # Check to make sure the pic_flag actually works. + echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $pic_flag -DPIC" + echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5 + if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + case "$host_os" in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then they + # create non-PIC objects. So, if there were any warnings, we assume that + # PIC is not supported. + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + can_build_shared=no + pic_flag= + else + echo "$ac_t"yes 1>&6 + pic_flag=" $pic_flag" + fi + ;; + *) + echo "$ac_t"yes 1>&6 + pic_flag=" $pic_flag" + ;; + esac + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + can_build_shared=no + pic_flag= + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* +else + echo "$ac_t"none 1>&6 +fi + +# Check to see if options -o and -c are simultaneously supported by compiler +echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6 +$rm -r conftest 2>/dev/null +mkdir conftest +cd conftest +$rm conftest* +echo "int some_variable = 0;" > conftest.c +mkdir out +# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +# that will create temporary files in the current directory regardless of +# the output directory. Thus, making CWD read-only will cause this test +# to fail, enabling locking or at least warning the user not to do parallel +# builds. +chmod -w . +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -o out/conftest2.o" +echo "$progname:829: checking if $compiler supports -c -o file.o" >&5 +if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then + + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + echo "$ac_t"no 1>&6 + compiler_c_o=no + else + echo "$ac_t"yes 1>&6 + compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat out/conftest.err 1>&5 + compiler_c_o=no + echo "$ac_t"no 1>&6 +fi +CFLAGS="$save_CFLAGS" +chmod u+w . +$rm conftest* out/* +rmdir out +cd .. +rmdir conftest +$rm -r conftest 2>/dev/null + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5 +if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then + + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + compiler_o_lo=no + else + echo "$ac_t"yes 1>&6 + compiler_o_lo=yes + fi + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + compiler_o_lo=no + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* +else + compiler_o_lo=no +fi + +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$ac_t$hard_links" 1>&6 + $rm conftest* + if test "$hard_links" = no; then + echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2 + need_locks=warn + fi +else + need_locks=no +fi + +if test "$with_gcc" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c" + echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then + + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + compiler_rtti_exceptions=no + else + echo "$ac_t"yes 1>&6 + compiler_rtti_exceptions=yes + fi + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + compiler_rtti_exceptions=no + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi + +fi + +# Check for any special shared library compilation flags. +if test -n "$special_shlib_compile_flags"; then + echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 + if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : + else + echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 + can_build_shared=no + fi +fi + +echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 +$rm conftest* +echo 'main(){return(0);}' > conftest.c +save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $link_static_flag" +echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5 +if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + echo "$ac_t$link_static_flag" 1>&6 +else + echo "$ac_t"none 1>&6 + link_static_flag= +fi +LDFLAGS="$save_LDFLAGS" +$rm conftest* + +if test -z "$LN_S"; then + # Check to see if we can use ln -s, or we need hard links. + echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 + $rm conftest.dat + if ln -s X conftest.dat 2>/dev/null; then + $rm conftest.dat + LN_S="ln -s" + else + LN_S=ln + fi + if test "$LN_S" = "ln -s"; then + echo "$ac_t"yes 1>&6 + else + echo "$ac_t"no 1>&6 + fi +fi + +# Make sure LD is an absolute path. +if test -z "$LD"; then + ac_prog=ld + if test "$with_gcc" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 + echo "$progname:991: checking for ld used by GCC" >&5 + ac_prog=`($CC -print-prog-name=ld) 2>&5` + case "$ac_prog" in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we are not using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac + elif test "$with_gnu_ld" = yes; then + echo $ac_n "checking for GNU ld... $ac_c" 1>&6 + echo "$progname:1015: checking for GNU ld" >&5 + else + echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 + echo "$progname:1018: checking for non-GNU ld" >&5 + fi + + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" + fi + + if test -n "$LD"; then + echo "$ac_t$LD" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + + if test -z "$LD"; then + echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 + exit 1 + fi +fi + +# Check to see if it really is or is not GNU ld. +echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 +# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + with_gnu_ld=yes +else + with_gnu_ld=no +fi +echo "$ac_t$with_gnu_ld" 1>&6 + +# See if the linker supports building shared libraries. +echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +always_export_symbols=no +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that contains `d'. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +# platforms (ab)use it in PIC code, but their linkers get confused if +# the symbol is explicitly referenced. Since portable code cannot +# rely on this symbol name, it's probably fine to never include it in +# preloaded symbol tables. + +case "$host_os" in +cygwin* | mingw*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$with_gcc" != yes; then + with_gnu_ld=no + fi + ;; + +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case "$host_os" in + aix3* | aix4*) + # On AIX, the GNU linker is very broken + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ + test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~ + $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols' + + archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~ + _lt_hint=1; + for symbol in `cat $export_symbols`; do + echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def; + _lt_hint=`expr 1 + \$_lt_hint`; + done~ + test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ + test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~ + $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ + $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ + $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts' + + old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' + ;; + + netbsd*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib' + # can we support soname and/or expsyms with a.out? -oliva + fi + ;; + + solaris*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + ;; + esac + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case "$host_os" in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$with_gcc" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4*) + hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib' + hardcode_libdir_separator=':' + if test "$with_gcc" = yes; then + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + shared_flag='-shared' + else + shared_flag='${wl}-bM:SRE' + hardcode_direct=yes + fi + allow_undefined_flag=' ${wl}-berok' + archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}' + archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}' + case "$host_os" in aix4.[01]|aix4.[01].*) + # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on + always_export_symbols=yes ;; + esac + ;; + + amigaos*) + archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs' + fix_srcfile_path='`cygpath -w $srcfile`' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case "$host_os" in + hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$with_gcc" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF + fi + hardcode_libdir_flag_spec='${wl}-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + openbsd*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' + ;; + + osf3* | osf4*) + if test "$with_gcc" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case "$host_os" in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + # archive_cmds='$LD -G -z text -h $soname -o $lib$libobjs$deplibs' + archive_cmds='$LD -G -h $soname -o $lib$libobjs$deplibs' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + *) + ld_shlibs=no + ;; + esac +fi +echo "$ac_t$ld_shlibs" 1>&6 +test "$ld_shlibs" = no && can_build_shared=no + +if test -z "$NM"; then + echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 + case "$NM" in + [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path. + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + NM="$ac_dir/nm -B" + break + elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + NM="$ac_dir/nm -p" + break + else + NM=${NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$NM" && NM=nm + ;; + esac + echo "$ac_t$NM" 1>&6 +fi + +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Define system-specific variables. +case "$host_os" in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" + ;; +irix*) + symcode='[BCDEGRST]' + ;; +solaris*) + symcode='[BDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[ABCDGISTW]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + $rm conftest* + cat > conftest.c <&5 + if { (eval echo $progname:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then + # Now try to grab the symbols. + nlist=conftest.nm + if { echo "$progname:1596: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then + + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c' + + cat <> conftest.c +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$objext conftstm.$objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo $progname:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + pipe_works=yes + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + LIBS="$save_LIBS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + $rm conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + global_symbol_pipe= + fi +done +if test "$pipe_works" = yes; then + echo "${ac_t}ok" 1>&6 +else + echo "${ac_t}failed" 1>&6 +fi + +if test -z "$global_symbol_pipe"; then + global_symbol_to_cdecl= +fi + +# Check hardcoding attributes. +echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$ac_t$hardcode_action" 1>&6 + + +reload_flag= +reload_cmds='$LD$reload_flag -o $output$reload_objs' +echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 +# PORTME Some linkers may need a different reload flag. +reload_flag='-r' +echo "$ac_t$reload_flag" 1>&6 +test -n "$reload_flag" && reload_flag=" $reload_flag" + +# PORTME Fill in your ld.so characteristics +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +file_magic_cmd= +file_magic_test_file= +deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [regex]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. +echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 +case "$host_os" in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4*) + version_type=linux + # AIX has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + # We preserve .a as extension for shared libraries though AIX4.2 + # and later linker supports .so + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a' + shlibpath_var=LIBPATH + deplibs_check_method=pass_all + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + deplibs_check_method=pass_all + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + +bsdi4*) + version_type=linux + library_names_spec='${libname}.so$major ${libname}.so' + soname_spec='${libname}.so' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + file_magic_cmd=/usr/bin/file + file_magic_test_file=/shlib/libc.so + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw*) + version_type=windows + need_version=no + need_lib_prefix=no + if test "$with_gcc" = yes; then + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a' + else + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + fi + dynamic_linker='Win32 ld.exe' + deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + file_magic_cmd='${OBJDUMP} -f' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case "$version_type" in + freebsd-elf*) + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /usr/lib/libc.so*` + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + deplibs_check_method=unknown + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + case "$host_os" in + freebsd2* | freebsd3.[01]*) + shlibpath_overrides_runpath=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so.$major' + library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so' + case "$host_os" in + irix5*) + libsuff= shlibsuff= + # this will be overridden with pass_all, but let us keep it just in case + deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case "$LD" in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /lib${libsuff}/libc.so*` + deplibs_check_method='pass_all' + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + + if test -f /lib/ld.so.1; then + dynamic_linker='GNU ld.so' + else + # Only the GNU ld.so supports shared libraries on MkLinux. + case "$host_cpu" in + *) dynamic_linker='Linux ld.so' ;; + esac + fi + ;; + +netbsd*) + version_type=sunos + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + ;; + +openbsd*) + version_type=sunos + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + need_version=no + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4*) + version_type=osf + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + # this will be overridden with pass_all, but let us keep it just in case + deplibs_check_method='file_magic COFF format alpha shared library' + file_magic_cmd=/usr/bin/file + file_magic_test_file=/shlib/libc.so + deplibs_check_method='pass_all' + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib" + file_magic_cmd=/usr/bin/file + file_magic_test_file=/lib/libc.so + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case "$host_vendor" in + ncr) + deplibs_check_method='pass_all' + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$ac_t$dynamic_linker" 1>&6 +test "$dynamic_linker" = no && can_build_shared=no + +# Report the final consequences. +echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 + +# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in +# configure.in, otherwise build static only libraries. +case "$host_os" in +cygwin* | mingw* | os2*) + if test x$can_build_shared = xyes; then + test x$enable_win32_dll = xno && can_build_shared=no + echo "checking if package supports dlls... $can_build_shared" 1>&6 + fi +;; +esac + +if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then + case "$deplibs_check_method" in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac +fi + +echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + test "$enable_shared" = yes && enable_static=no + ;; +esac + +echo "$ac_t$enable_shared" 1>&6 + +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes + +echo "checking whether to build static libraries... $enable_static" 1>&6 + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +echo $ac_n "checking for objdir... $ac_c" 1>&6 +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +echo "$ac_t$objdir" 1>&6 + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else +if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then + lt_cv_dlopen=no lt_cv_dlopen_libs= +echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 +echo "$progname:2170: checking for dlopen in -ldl" >&5 +ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen""... $ac_c" 1>&6 +echo "$progname:2207: checking for dlopen" >&5 +if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +dlopen(); +#endif + +; return 0; } +EOF +if { (eval echo $progname:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_dlopen=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_dlopen=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 +echo "$progname:2251: checking for dld_link in -ldld" >&5 +ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for shl_load""... $ac_c" 1>&6 +echo "$progname:2288: checking for shl_load" >&5 +if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +shl_load(); +#endif + +; return 0; } +EOF +if { (eval echo $progname:2315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_shl_load=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_shl_load=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 +echo "$progname:2333: checking for shl_load in -ldld" >&5 +ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + echo "$ac_t""no" 1>&6 +fi + + +fi + + +fi + + +fi + + +fi + +fi + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + fi + + case "$lt_cv_dlopen" in + dlopen) +for ac_hdr in dlfcn.h; do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "$progname:2395: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int fnord = 0; +EOF +ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo $progname:2405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi +done + + if test "x$ac_cv_header_dlfcn_h" = xyes; then + CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + fi + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 +echo "$progname:2433: checking whether a program can dlopen itself" >&5 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + lt_cv_dlopen_self=cross + else + cat > conftest.c < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LTDL_GLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LTDL_GLOBAL DL_GLOBAL +# else +# define LTDL_GLOBAL 0 +# endif +#endif + +/* We may have to define LTDL_LAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LTDL_LAZY_OR_NOW +# ifdef RTLD_LAZY +# define LTDL_LAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LTDL_LAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LTDL_LAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LTDL_LAZY_OR_NOW DL_NOW +# else +# define LTDL_LAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +fnord() { int i=42;} +main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); + if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); + if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } + +EOF +if { (eval echo $progname:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + lt_cv_dlopen_self=yes +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + lt_cv_dlopen_self=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$lt_cv_dlopen_self" 1>&6 + + if test "$lt_cv_dlopen_self" = yes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 +echo "$progname:2506: checking whether a statically linked program can dlopen itself" >&5 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + lt_cv_dlopen_self_static=cross + else + cat > conftest.c < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LTDL_GLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LTDL_GLOBAL DL_GLOBAL +# else +# define LTDL_GLOBAL 0 +# endif +#endif + +/* We may have to define LTDL_LAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LTDL_LAZY_OR_NOW +# ifdef RTLD_LAZY +# define LTDL_LAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LTDL_LAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LTDL_LAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LTDL_LAZY_OR_NOW DL_NOW +# else +# define LTDL_LAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +fnord() { int i=42;} +main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); + if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); + if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } + +EOF +if { (eval echo $progname:2560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + lt_cv_dlopen_self_static=yes +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + lt_cv_dlopen_self_static=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 +fi + ;; + esac + + case "$lt_cv_dlopen_self" in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case "$lt_cv_dlopen_self_static" in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + +# Copy echo and quote the copy, instead of the original, because it is +# used later. +ltecho="$echo" +if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ltecho="$CONFIG_SHELL \$0 --fallback-echo" +fi +LTSHELL="$SHELL" + +LTCONFIG_VERSION="$VERSION" + +# Only quote variables if we're using ltmain.sh. +case "$ltmain" in +*.sh) + # Now quote all the things that may contain metacharacters. + for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \ + old_LD old_LDFLAGS old_LIBS \ + old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \ + AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \ + file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case "$var" in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case "$ltecho" in + *'\$0 --fallback-echo"') + ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + + trap "$rm \"$ofile\"; exit 1" 1 2 15 + echo "creating $ofile" + $rm "$ofile" + cat < "$ofile" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. +# +# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi + +### BEGIN LIBTOOL CONFIG +EOF + cfgfile="$ofile" + ;; + +*) + # Double-quote the variables that need it (for aesthetics). + for var in old_CC old_CFLAGS old_CPPFLAGS \ + old_LD old_LDFLAGS old_LIBS \ + old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do + eval "$var=\\\"\$var\\\"" + done + + # Just create a config file. + cfgfile="$ofile.cfg" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + echo "creating $cfgfile" + $rm "$cfgfile" + cat < "$cfgfile" +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +EOF + ;; +esac + +cat <> "$cfgfile" +# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\ +# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\ +# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\ +# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\ +# $0$ltconfig_args +# +# Compiler and other test output produced by $progname, useful for +# debugging $progname, is in ./config.log if it exists. + +# The version of $progname that generated this script. +LTCONFIG_VERSION=$LTCONFIG_VERSION + +# Shell to use when invoking shell scripts. +SHELL=$LTSHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$ltecho + +# The archiver. +AR=$AR + +# The default C compiler. +CC=$CC + +# The linker used to build libraries. +LD=$LD + +# Whether we need hard or soft links. +LN_S=$LN_S + +# A BSD-compatible nm program. +NM=$NM + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$reload_flag +reload_cmds=$reload_cmds + +# How to pass a linker flag through the compiler. +wl=$wl + +# Object file suffix (normally "o"). +objext="$objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$pic_flag + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$RANLIB +old_archive_cmds=$old_archive_cmds +old_postinstall_cmds=$old_postinstall_cmds +old_postuninstall_cmds=$old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$old_archive_from_new_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$archive_cmds +archive_expsym_cmds=$archive_expsym_cmds +postinstall_cmds=$postinstall_cmds +postuninstall_cmds=$postuninstall_cmds + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$global_symbol_to_cdecl + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$include_expsyms + +EOF + +case "$ltmain" in +*.sh) + echo '### END LIBTOOL CONFIG' >> "$ofile" + echo >> "$ofile" + case "$host_os" in + aix3*) + cat <<\EOF >> "$ofile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "${COLLECT_NAMES+set}" != set; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # Append the ltmain.sh script. + sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1) + + chmod +x "$ofile" + ;; + +*) + # Compile the libtool program. + echo "FIXME: would compile $ltmain" + ;; +esac + +test -n "$cache_file" || exit 0 + +# AC_CACHE_SAVE +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +exit 0 + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: