summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2019-06-20cmake: Clarify comment in cmake toolchain fileuninative-2.6Richard Purdie
The comment is misleading and there was confusion in a bug report. In the native case STAGING_DATADIR would be equal to the native value so there isn't any issue but tweak the comment. [YOCTO #12761] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19lttng-tools: Filter ptest output to remove random tmp directoriesRichard Purdie
These tmp paths end up in the test names making it hard to compare test runs so filter them out, they're not useful for our purposes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19openssh: Add missing DEPENDS on virtual/cryptRichard Purdie
Changes to libxcrypt revealed a missing dependency in the openssh recipe. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19oeqa/logparser: ignore test failure commentaryRoss Burton
The output format for Python and GLib both can be of this form: FAIL: foobar (Segmentation fault) In this case the test is called foobar not foobar_segmentation_fault. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19cve-check: Consider CVE that affects versions with less than operatorPierre Le Magourou
In the NVD json CVE feed, affected versions can be strictly matched to a version, but they can also be matched with the operator '<='. Add a new condition in the sqlite query to match affected versions that are defined with the operator '<='. Then use LooseVersion to discard all versions that are not relevant. Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19cve-check: Manage CVE_PRODUCT with more than one namePierre Le Magourou
In some rare cases (eg. curl recipe) the CVE_PRODUCT contains more than one name. Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19cve-check: Remove dependency to cve-check-tool-nativePierre Le Magourou
Use the new update-cve-db recipe to update database. Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19cve-update-db: New recipe to update CVE databasePierre Le Magourou
cve-check-tool-native do_populate_cve_db task was using deprecated NVD xml data feeds, cve-update-db uses NVD json data feeds. Sqlite database schema was updated to take into account CVSSv3 CVE scores and operator in affected product versions. A new META table was added to store the last modification date of the NVD json data feeds. Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19btrfs-tools: update to 5.1.1Alexander Kanavin
Drop backported patch, and a patch where upstream took care of the issue. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19epiphany: update to 3.32.3Alexander Kanavin
Drop backported patch. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19libnewt: merge libnewt-python recipe into the main recipeAlexander Kanavin
libnewt-python was including libnewt recipe and adding tweaks, which is bad form. It also broke AUH, as it won't update more than one recipe in a single transaction. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19vala: upgrade 0.44.3 -> 0.44.5Alexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19uninative-tarball: Add libxcrypt-compatRichard Purdie
This avoids sstate/uninative relocation issues where a binary was built against a system with libcrypt.so.1 or libcrypt.so.2 and then run on the opposite by ensuring both libraries are in uninative. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19libxcrypt-compat: Add recipe to build the obsolete APIsRichard Purdie
Add a recipe which is able to build the obsolete APIs. This is mainly to support uninative which needs to have both the new and obsolete APIs available to support the different host combinations. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19libxcrypt: Switch to disable obsolete APIsRichard Purdie
Since we have a fair amount of control of what we build in OE we can disable the obsolete APIs which is what most distros are doing at this point. This causes the library version to bump from 1 to 2. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19python3: python3: Fix build error x86->x86Ricardo Ribalda Delgado
When building x86->x86 the system will try to execute .so and related items from the default PYTHONPATH. This will fail if the target CPU contains instructions that the host CPU does not have, add CROSSPYTHONPATH into PYTHONPATH so we can prepend the list to find correct libs. Fixes: Illegal instruction (core dumped) Makefile:625: recipe for target 'sharedmods' failed make: *** [sharedmods] Error 132 make: *** Waiting for unfinished jobs.... Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19rootfs: Fix dependency for every dpkg runRicardo Ribalda Delgado
Avoid getting a warning on do_rootfs. Fixes: NOTE: Installing the following packages: libgdk-pixbuf-2.0-locale-en-gb glibc-locale-en-gb libatspi-locale-en-gb gstreamer1.0-locale-en-gb gtk+3-locale-en libatk-1.0-locale-en-gb gtk+3-locale-en-gb gstreamer1.0-plugins-good-locale-en-gb gstreamer1.0-plugins-base-locale-en-gb gstreamer1.0-plugins-bad-locale-en-gb libglib-2.0-locale-en-gb avahi-locale-en-gb vte-locale-en-gb xkeyboard-config-locale-en-gb WARNING: Unable to install packages. Command '/workdir/build/tmp/work/qt5122-poky-linux/bottlecam-image/1.0-r0/recipe-sysroot-native/usr/bin/apt-get install --force-yes --allow-unauthenticated libgdk-pixbuf-2.0-locale-en-gb glibc-locale-en-gb libatspi-locale-en-gb gstreamer1.0-locale-en-gb gtk+3-locale-en libatk-1.0-locale-en-gb gtk+3-locale-en-gb gstreamer1.0-plugins-good-locale-en-gb gstreamer1.0-plugins-base-locale-en-gb gstreamer1.0-plugins-bad-locale-en-gb libglib-2.0-locale-en-gb avahi-locale-en-gb vte-locale-en-gb xkeyboard-config-locale-en-gb' returned 100: Reading package lists... Building dependency tree... Reading state information... Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19meson: Fix native patch to python3Ricardo Ribalda Delgado
Fixes: File "/workdir/build/tmp/work/dbfp4-poky-linux/qv4l2/1.17.0+gitAUTOINC+95f39aae48-r0/recipe-sysroot-native/usr/lib/python3.7/site-packages/mesonbuild/dependencies/base.py", line 574, in _call_pkgbin cache[(self.pkgbin, targs, fenv)] = self._call_pkgbin_real(args, env, use_native) File "/workdir/build/tmp/work/dbfp4-poky-linux/qv4l2/1.17.0+gitAUTOINC+95f39aae48-r0/recipe-sysroot-native/usr/lib/python3.7/site-packages/mesonbuild/dependencies/base.py", line 556, in _call_pkgbin_real cmd = self.pkgbin.get_command() + "-native" + args TypeError: can only concatenate list (not "str") to list Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19rng-tools: 6.6 -> 6.7Kai Kang
Upgrade rng-tools from 6.6 to latest commit 9fc873c which 26 commits beyond release 6.7: $ git describe 9fc873c5af0e39263 v6.7-26-g9fc873c Because it includes some critical fixes such as configure fails and 'Import yocto fixes for 6.6'. * remove local patches that all are merged by upstream * backport patch to fix rngd fails to stop issue * add PACKAGECONFIG libp11 Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19dpkg: Use less as pagerRicardo Ribalda Delgado
Debian traditionaly uses /usr/bin/pager as the system pager, which is a link to the user preferred pager. This is a Debianism. Without this patch: root@qt5122:~# dpkg -l sh: pager: command not found dpkg-query: error: showing package list on pager subprocess returned error exit status 127 Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19glib-2.0: fix host path appearing in gsocketclient-slow test scriptRoss Burton
Glib's build looks for the 'env' binary and embeds that path into the test script, but thanks to hosttools this is /path/to/tmpdir/hosttools/env. Fix this by hardcoding the path to env in the cross file. Also as the cross file is only used in target builds only add it to SRC_URI for target builds, so that changes to the cross file don't cause a rebuild of glib-2.0-native. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19wireless-regdb: Add recipeAdrian Bunk
Since wpa-supplicant is provided, the database of permitted frequencies should also be provided. wireless-regdb-static should be used with kernel >= 4.15. wireless-regdb can be used with older kernels and is mostly irrelevant here, but keeping it in meta-networking would create needless recipe duplication. This package was previously in meta-networking. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19serf: stop scons trying to create directories in hosts rootfsMartin Jansa
* since 1522f09a4d serf: cleanup recipe serf.do_install fails in builds with multilib enabled (with libdir=/usr/lib64 on host where /usr/lib64 doesn't exist) DEBUG: Executing shell function do_install scons: Reading SConscript files ... PermissionError: [Errno 13] Permission denied: '/usr/lib64': File "TOPDIR/BUILD/work/qemux86-signage-linux/serf/1.3.9-r0/serf-1.3.9/SConstruct", line 158: ENV = os.environ, File "/TOPDIR/BUILD/work/qemux86-signage-linux/serf/1.3.9-r0/recipe-sysroot-native/usr/bin/../../usr/lib/python3.7/site-packages/SCons/Environment.py", line 965: variables.Update(self) File "/TOPDIR/BUILD/work/qemux86-signage-linux/serf/1.3.9-r0/recipe-sysroot-native/usr/bin/../../usr/lib/python3.7/site-packages/SCons/Variables/__init__.py", line 227: option.validator(option.key, env.subst('${%s}'%option.key), env) File "TOPDIR/BUILD/work/qemux86-signage-linux/serf/1.3.9-r0/serf-1.3.9/SConstruct", line 60: return PathVariable.PathIsDirCreate(key, val, env) File "/TOPDIR/BUILD/work/qemux86-signage-linux/serf/1.3.9-r0/recipe-sysroot-native/usr/bin/../../usr/lib/python3.7/site-packages/SCons/Variables/PathVariable.py", line 101: os.makedirs(val) File "TOPDIR/BUILD/work/qemux86-signage-linux/serf/1.3.9-r0/recipe-sysroot-native/usr/lib/python3.7/os.py", line 221: mkdir(name, mode) ERROR: scons install execution failed. * I don't know how exactly --install-sandbox is supposed to work but in this case it's trying to mkdir /usr/lib64 on the host rootfs which is clearly wrong and if I set LIBDIR together with --install-sandbox then the install paths are prefixed with $D twice in some cases (not for includedir and empty libdir at the end). So in the end I think it was an issue caused by the custom path validator in serf's SConstruct, removing that stops touching host and the installed paths (including the paths inside libserf*.pc) look correct Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19systemd-conf: not configure network for nfs rootKai Kang
It fails to boot nfs root with systemd that systemd-networkd re-configures wired network and breaks the connection with nfs root. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19linux-yocto: Mark qemuriscv64 as compatibleAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19qemuriscv64: Add the QEMU RISC-V 64-bit machineAlistair Francis
The include is split ready to add the 32-bit RISC-V machine as soon as glibc supports 32-bit RISC-V. This is based on the work in the meta-riscv layer, thanks to Khem for starting this. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19opensbi: Initial commit of OpenSBIAlistair Francis
This is used as a bootloader for RISC-V QEMU machines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19libffi: Add RISC-V supportAlistair Francis
Backport a libffi patch to add RISC-V support. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19wic/bootimg-efi: allow multiple initrdChee Yang Lee
Allow plugin bootimg-efi to configure with multiple initrd through source parameter. Uses ; to separate each initrd. e.g: --sourceparams="loader=${EFI_PROVIDER},initrd=initrd1;initrd2" Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19gobject-introspection:upgrade 1.60.1 -> 1.60.2Zang Ruochen
-Upgrade from gobject-introspection_1.60.1.bb to gobject-introspection_1.60.2.bb. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19xkeyboard:upgrade 2.26 -> 2.27Zang Ruochen
-Upgrade from xkeyboard-config_2.26.bb to xkeyboard-config_2.27.bb. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19lttng-ust:upgrade 2.10.3 -> 2.10.4Zang Ruochen
-Upgrade from lttng-ust_2.10.3.bb to lttng-ust_2.10.4.bb. -lttng-ust/0001-compat-work-around-broken-_SC_NPROCESSORS_CONF-on-MU.patch Removed since this is included in 2.10.4 Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19curl:upgrade 7.64.1 -> 7.65.1Zang Ruochen
-Upgrade from curl_7.64.1.bb to curl_7.65.1.bb. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19gnupg:upgrade 2.2.15 -> 2.2.16Zang Ruochen
-Upgrade from gnupg_2.2.15.bb to gnupg_2.2.16.bb. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19gnutls:upgrade 3.6.7 -> 3.6.8Zang Ruochen
-Upgrade from gnutls_3.6.7.bb to gnutls_3.6.8.bb. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19target-sdk-provides-dummy: add libperl.so.5 to DUMMY_PROVIDESChen Qi
Add libperl.so.5 to DUMMY_PROVIDES to avoid do_rootfs failure like below. Error: Problem: package postgresql-11.3-r0.core2_32 requires libperl.so.5, but none of the providers can be installed package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with perl provided by perl-5.30.0-r0.core2_32 package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with perl-module-strict provided by perl-5.30.0-r0.core2_32 This problem could be reproduced by add 'postgresql' to IMAGE_INSTALL and then `bitbake core-image-minimal -c populate_sdk'. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19libevdev:upgrade 1.6.0 -> 1.7.0Zang Ruochen
-Upgrade from libevdev_1.6.0.bb to libevdev_1.7.0.bb. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19libevent:upgrade 2.1.8 -> 2.1.10Zang Ruochen
-Upgrade from libevent_2.1.8.bb to libevent_2.1.10.bb. -libevent/0001-test-fix-32bit-linux-regress.patch Removed since this is included in 2.1.10. Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19runtime/cases/logrotate: make test more reliableAnuj Mittal
By default logrotate uses 'dateext' in logrotate.conf which results in a date string being appended at the end of log name. In cases when a test that installs configuration in logrotate.d is executed first (dnf for example), it might result in errors when logrotate test is executed: error: destination /var/log/dnf.librepo.log-20190528 already exists, skipping rotation error: destination /var/log/dnf.rpm.log-20190528 already exists, skipping rotation error: destination /var/log/hawkey.log-20190528 already exists, skipping rotation Tweak the test to use it's own temporary configuration that doesn't enable dateext. Fixes [YOCTO #13363] Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18gcc-runtime: fix C++ header mapping for n32/x32 tuneChangqing Li
The SDK was unable to find the C++ header pieces correctly since it's using a generic compiler, not one specifically targeting the multilib vendor prefix and default tune. This adds the right mapping to ensure SDKs work as expected. And fix problem in below configurations: multilib configuration 1: MACHINE="qemumips64" MULTILIBS ?= "multilib:lib32 multilib:libn32" DEFAULTTUNE_virtclass-multilib-lib32 ?= "mips" DEFAULTTUNE_virtclass-multilib-libn32 ?= "mips64-n32" MULTILIB_GLOBAL_VARIANTS_append = " libn32" require conf/multilib.conf ignoring nonexistent directory "<path>/sysroots/mips64-poky-linux/usr/include/c++/8.2.0/mips64-poky-linux/32 multilib configuration 2: MACHINE="qemumips64" MULTILIBS = 'multilib:lib64 multilib:lib32' DEFAULTTUNE = 'mips64-n32' DEFAULTTUNE_virtclass-multilib-lib64 = 'mips64' DEFAULTTUNE_virtclass-multilib-lib32 = 'mips32r2' require conf/multilib.conf For this configuration: for target gcc-runtime, need to create symlink like mips64-poly-linux --> mips64-poky-linux-gnu32 for target lib64-gcc-runtime, need to create symlink like mips64-poly-linux/32 --> mips64-pokymllib64-linux in order to avoid conflict during populate_sdk, create symlink for subfoler bits/ext for target gcc-runtime, this is ugly, but seems no better way to cover all kinds of configuration. single lib configuration: MACHINE="qemumips64" DEFAULTTUNE = "mips64-n32" Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18openssl: Fix a build bug on aarch64BE.Lei Maohui
Fix bug as following on aarch64BE: Error: operand 1 must be an integer register -- `rev v31.16b,v31.16b' Signed-off-by: Lei Maohui <leimaohui@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18base.bbclass: define PACKAGECONFIG_CONFARGS before only sometimes appending ↵Martin Jansa
to it * just to make sure it's expaned by bitbake before it gets executed in shell * e.g. with cmake.bbclass and cmake recipe (any recipe without PACKAGECONFIG options have this issue) it looks like this: bitbake -e cmake | grep EXTRA_OECMAKE= EXTRA_OECMAKE=" -DCMAKE_DOC_DIR=share/doc/cmake-3.14 -DCMAKE_USE_SYSTEM_LIBRARIES=1 -DCMAKE_USE_SYSTEM_LIBRARY_JSONCPP=0 -DCMAKE_USE_SYSTEM_LIBRARY_LIBUV=0 -DCMAKE_USE_SYSTEM_LIBRARY_LIBRHASH=0 -DKWSYS_CHAR_IS_SIGNED=1 -DBUILD_CursesDialog=0 -DKWSYS_LFS_WORKS=1 \${PACKAGECONFIG_CONFARGS}" Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18apt: fix permissions on apt-daily script for systemdMatt Madison
The script needs to be executable so the service doesn't fail. Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18libsdl2: use binconfig-disabledRoss Burton
Just like libsdl, we can rip out the sdl2-config script from the sysroot as pkg-config is preferrable. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18binconfig: don't try to fix up .la filesRoss Burton
If we're going to clean buildpaths from installed .la files then we should do it globally, not in a class that only six recipes in oe-core use. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18insane: remove empty test that does nothingRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18insane: improve buildpath warning messagesRoss Burton
Instead of reporting large chunks of the work directory and not the package name: "File /work/corei7-64-poky-linux/libidn2/2.2.0-r0/packages-split/libidn2-dev/usr/lib/pkgconfig/libidn2.pc in package contained reference to tmpdir" We can clean up the paths and be more useful: "File /usr/lib/pkgconfig/libidn2.pc in package libidn2-dev contains reference to TMPDIR" Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18kernel-fitimage: introduce FIT_HASH_ALGAyoub Zaki
sanitize fitImage hash algorithm selection with FIT_HASH_ALG switch default hash algorithm from sha1 to sha256 Signed-off-by: Ayoub Zaki <ayoub.zaki@embexus.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18systat: systemd never enables the serviceStefano Babic
Even if SYSTEMD_AUTO_ENABLE is set to "enable", the service is never activated by systemd. The cause is the postinst function in the recipe: pkg_postinst_${PN} () { if [ -n "$D" ]; then exit 0 fi if [ -e /etc/init.d/populate-volatile.sh ]; then /etc/init.d/populate-volatile.sh update fi } This generates with activated systemd the following postinst script: set -e if [ -n "$D" ]; then exit 0 fi if [ -e /etc/init.d/populate-volatile.sh ]; then /etc/init.d/populate-volatile.sh update fi OPTS="" if [ -n "$D" ]; then OPTS="--root=$D" fi if type systemctl >/dev/null 2>/dev/null; then if [ -z "$D" ]; then systemctl daemon-reload fi systemctl $OPTS enable sysstat.service if [ -z "$D" -a "enable" = "enable" ]; then systemctl --no-block restart sysstat.service fi fi Due to the exit statement, systemctl is never called and the service is never enabled in rootfs. Invert the logic for the check to let run the rest of postinst script. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18manifest.py: fix test_SDK_manifest_entriesChen Qi
TOOLCHAIN_OUTPUTNAME could be overridden. So use this variable directly instead of its default value ${SDK_NAME}-toolchain-${SDK_VERSION}. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-24 16:08:57 +0000