| Age | Commit message (Collapse) | Author |
|---|
|
Rebase existing patches
Add patch to fix rpath issue with ptest
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The plugins are installed to ${libdir}/weston, not ${libexecdir}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As this recipe's ptest support is merely a shim to pull in dbus-test-ptest it
doesn't inherit ptest. This means that PTEST_ENABLED isn't ever set, so check
DISTRO_FEATURES directly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There's no need to add a dependency on python-crypt_class-native to
nativesdk-openssl as the general dependency there is transformed appropriately.
Presumably this is cruft from back when SDK packages were suffixed instead of
prefixed, and there were mapping problems.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If any part of Python gets installed in a SDK, we need to ensure that all of
Python gets installed to avoid replacing python in the environment with a
minimal package set.
[ YOCTO #6735 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
GDB 7.8 added Guile support, and it will auto-detect if Guile is present (which
is non-deterministic, so bad), and if it's present will fail to find the guild
binary as it doesn't consider the sysroot.
For now disable Guile support in GDB, if there is a need to have it enabled in
the future then GDB/Guile can be fixed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Disable autoheader by setting EXTRA_AUTORECONF to --exclude=autoheader instead
of setting AUTOHEADER to true.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Disable autoheader by setting EXTRA_AUTORECONF to --exclude=autoheader instead
of setting AUTOHEADER to true.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is necessary to have an SDK for developers who build their software with
ccache to speed up the compilation. Without resolving this, unfortunately the
compilation will fail for them.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use CONFFILES to mark editable files as such,
/etc/pam.d/common-session
/etc/pam.d/common-auth
/etc/pam.d/common-password
/etc/pam.d/common-session-noninteractive
/etc/pam.d/common-account
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use CONFFILES to mark editable files as such,
/etc/init.d/checkroot.sh
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use CONFFILES to mark editable files as such,
/etc/motd
/etc/nsswitch.conf
/etc/profile
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
While invoking create_index failed, there was no error output
and didn't break the build until the package installation.
...
|ERROR: run-postinsts not found in the base feeds (qemux86 i586 x86
noarch any all).
...
The reason is we used multiprocessing to execute create_index, and
did not check its invoking result.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
While doc file make use of update-alternatives to fix confliction,
we should reconfigure update-alternatives for doc compression.
Such as util-linux-doc:
...
update-alternatives --install /usr/share/man/man1/last.1 last.1
/usr/share/man/man1/last.1.util-linux 100
...
was updated by doc_compress to
...
update-alternatives --install /usr/share/man/man1/last.1.bz2 last.1.bz2
/usr/share/man/man1/last.1.util-linux.bz2 100
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The previous detection missing the following manual file:
...
gawk-doc/usr/share/man/man3/readfile.3am
libpcap-doc/usr/share/man/man3/pcap_dump_open.3pcap
...
We use re to imporve it.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Function base_get_metadata_svn_revision was crashing due to an uncaught
IndexError exception.
The except notation without parentheses is legacy syntax. It is the equivalent
to 'except IOError as IndexError' which is not what we want here.
The change catches both exceptions.
Signed-off-by: Merten Sach <msach@mailbox.tu-berlin.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
'scons' cleans the environment which breaks ccache builds because
CCACHEDIR can point to an unexpected location:
| ccache arm-linux-gnueabi-gcc ... context.c
| ccache: failed to create .../serf/1.3.8-r0/.home/.ccache (No such file or directory)
Issue is described in
http://www.scons.org/wiki/ImportingEnvironmentSettings
and because 'bitbake' cleans environment we can pass it completely
instead of trying to enumerate needed env.
With the 'env.patch' the FULLCC variable is not needed anymore (which
would break when CC is 'ccache arm-...-gcc' and host ccache is used)
because the correct $PATH is available during scons build:
| sh: .../sysroots/x86_64-oe-linux/usr/bin/arm-linux-gnueabi/ccache: No such file or directory
| scons: *** [context.o] Error 127
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When we use ASSUME_SHLIBS,e.g.
ASSUME_SHLIBS = "libEGL.so.1:libegl-implementation"
then we end up with errors like below when using shlibs2 (dizzy+)
File: 'package_do_shlibs', lineno: 216, function: package_do_shlibs
0212: dep_pkg = dep_pkg.rsplit("_", 1)
0213: if len(dep_pkg) == 2:
0214: lib_ver = dep_pkg[1]
0215: dep_pkg = dep_pkg[0]
*** 0216: shlib_provider[l][libdir] = (dep_pkg, lib_ver)
0217:
0218: libsearchpath = [d.getVar('libdir', True),
d.getVar('base_libdir', True)]
0219:
0220: for pkg in packages.split():
Exception: KeyError: 'libEGL.so.1'
This is because the entry which is being populated does not exist
so lets create it if its not already there.
Change-Id: I9e292c5439e5d1e01ea48341334507aacc3784ae
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
resolvconf was missing a script and needed readlink which was in
/usr/bin. Also the /etc/resolv.conf was not being correctly linked
to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties
change which is now a file as opposed to created in do_install.
Ensure that the correct scripts for ifup/ifdown get installed and that
resolvconf is correctly enabled at startup
[YOCTO #5361]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add patch for adding pkgconfig file.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove backported patches
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove backported CVE patches
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch resolves following error:
"connman-dbus.xml": "connman" is not a valid D-Bus interface name
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
Remove obsolete_automake_macros.patch, since upstream has merged it.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current implementation of shared work for gcc is at best confusing. It relies
on the fetch/unpack/patch tasks having exactly the same stamps and if this gets
broken for some reason, its hard to figure out what the problem is. It also
leads to complex code in bitbake.
The benefits of shared work for gcc are clear but a better approach is needed. This
patch adjusts things so that a single new recipe (gcc-source) provides the
fetch/unpack/patch/preconfigure tasks, the rest of gcc simply depends on these tasks
and have no fetch/unpack/patch tasks of their own.
This means we should get the significant benefits (disk usage/performance) of the
single source tree but in a way which has less potential for problems and is
easier for people to understand. The cost is an extra recipe/some inc files
which is probably a good tradeoff.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As the code that uses BB_SIGNATURE_EXCLUDE_FLAGS uses d.getVarFlags() so doesn't
get to see the internal flags, remove _append and _prepend. Also defaultval is
now _defaultval and thus internal, so remove that too.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This field is now internal and won't be seen.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This field is now internal and won't be seen.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This field is now internal and won't be seen.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows us to merge in the _defaultval changes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake fetcher
Because methods for get latest version of upstream package are now available
into bitbake removes duplicated code and make use of it.
Compatibility testing was made running distrodata class and the result files
can be found at:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=1813
[YOCTO #1813]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I disabled this patch as it became obsolete some time ago but forgot to
remove it, this cleans things up.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The wacom driver we use is missing a HID descriptor causing it not to work
with 3.17 kernels and later. This patch adds in a descriptor to make the
driver work again.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixing the bug where the openembedded-core name was registered
as "meta" in toaster.
[YOCTO #6962]
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some minor changes to the names and descriptions
used in the Toaster configuration file:
* Change the name of the local layer source from Local OE-Core
to Local OpenEmbedded
* Change the imported layer source name from User Imported Layers
to just Imported layers. It is shorter, which helps table display
* Change the description of the master release from OE-Core
master to OpenEmbedded master
* Change the description of the dizzy release from OE-Core dizzy
to OpenEmbedded Dizzy
* Change the helptext of the dizzy release to remove the
"latest" reference, which can make maintenance hard
* Change the name of the Local Yocto Project release to Local
OpenEmbedded
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When installing into a sysroot this class examines $D/etc/passwd for
content, then invokes useradd to make changes. Under pseudo useradd
attempts to look up user information in directories specified by
$PSEUDO_PASSWD. For opkg multilib installs $D is not always the same as
$IMAGE_ROOT, and the user might already be in the IMAGE_ROOT files,
causing a failure during rootfs population.
Fix this by ensuring the files pseudo looks at when doing useradd stuff
are the same ones that useradd.bbclass will be manipulating.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
Recipe packaging for the target requires permissions that are consistent
with meta/files/fs-perms.txt which specifies certain user and group
names. In the early parts of a target build base-passwd is not yet
available to provide the target /etc files used for user/group lookup.
Allow pseudo to fall-back to the last-resort files it installs if the
target ones aren't there yet.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
Normally pseudo is built with --without-passwd-fallback, which requires
that somebody provide target passwd and group files. Those come from
base-passwd in OE, but base-passwd cannot be built without first
invoking operations under pseudo that require getpw*/getgr*.
Provide the absolute minimum stub files, matching in content what will
eventually be on the target, that can be used in the cases where the
target files are not yet available. The requirements for minimum stub
are the usernames and groups identified in meta/files/fs-perms.txt.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
No good reason exists to fall back to the build host /etc files when
attempting to resolve user and group information. Recipe dependencies
should be updated so the correct target files are available.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
When pseudo is configured to disallow fallback to the build host
/etc/hosts and /etc/group, the selection of ${IMAGE_ROOT} for
PSEUDO_PASSWD is insufficient as the necessary files will not be
available until base-passwd has been installed and its pkg_postinst
script run. Fall back to the ${STAGING_DIR_NATIVE} version of those
files until the rootfs versions are available. (The native copies are
never modified by the build; the ones in ${STAGING_DIR_TARGET} are
updated and may contain settings not consistent with what would be
created by post-install useradd/groupadd commands invoked in the image
rootfs.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
This makes it possible to use --without-passwd-fallback when building
images where the preferred passwd files are not available until after
installation has begun.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
A bug in pseudo 1.6.2 results in lock failures if this option is
present.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
filters for edgerouter, minnow and jasperforest.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Saul Wold
Ross Burton
Laszlo Papp
Jian Liu
Hongxu Jia
Merten Sach
Enrico Scholz
Khem Raj
Chong Lu
Richard Purdie
Aníbal Limón
Alexandru DAMIAN
Belen Barros Pena
Peter A. Bigot
Lucian Musat