| Age | Commit message (Collapse) | Author |
|---|
|
Move classes to classes-global or classes-recipe as appropriate to take
advantage of new bitbake functionality to check class scope/usage.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As stated in our top level license files, the license is MIT unless
otherwise stated. Add SPDX identifers accordingly. Replace older
license statementa with the standardised syntax. Also drop "All
Rights Reserved" expression as it isn't used now, doesn't mean anything
and is confusing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where there isn't a copyright statement, add one to make it explicit.
Also drop editor config lines where they were present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
replicate (e)SDK
Specifically:
1. Place the environment setup file into $B and not into $TMPDIR,
so that the recipe using the class can itself better decide what to do with the file.
2. Use global, unified sysroots (provided through build-sysroots recipe)
and not recipe-specific ones, as this allows flexible on-the-fly management of what
libraries are available to build applications, without having to modify any
recipes, similar to eSDK 'extensible' part.
This also requires adjustment of the sstate sametune_samegsigs test, as meta-ide-support
becomes dependent on $MACHINE (unified sysroots have it in their paths)
and needs to be excluded from the test.
3. Add a few missing settings that have been added to SDK environment files.
4. Add a snippet to the environment setup file that also runs the relocation scripts.
In regular SDKs this is executed by the SDK installer, in direct SDK we can do it when
setting up the environment.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patch creates ${MULTIMACH_TARGET_SYS}-toolchain.cmake file
at ${SDK_INSTALL_DIR}/sysroots/${SDK_SYS}/usr/share/cmake/, which is
per-toolchain CMake toolchain file containing arch-specific values
and independent of OE environment variables.
The file gets created after installing SDK toolchain installer
ined by running "bitbake -c populate_sdk <image>".
The changes are similar to meson-setup.py which is used to
create arch-specific
${SDK_INSTALL_DIR}/sysroots/${SDK_SYS}/usr/share/meson/*-meson.cross
[YOCTO #14644]
Tested-by: Jan Dorniak <jaskij@gmail.com>
Signed-off-by: Jagadeesh Krishnanjanappa <workjagadeesh@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use double quotes("") rather than single quotes('') for PS1 in
EXPORT_SDK_PS1 which will be exported in SDK environment file. Then it
could set PS1 for SDK env with some variables in host env, such as the
original PS1. The SDK PS1 could be some distinct words plus original PS1
rather than replace the whole original PS1. For example, it could set in
local.conf with
SDK_PS1 = "(oesdk) \${PS1}"
then it just prepends '(oesdk) ' before original PS1 after source the
SDK environment file.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if you change the site files, nothing rebuilds since they are
not accounted for in task checksums. They could/should be through the
file-checksums task flag. We need to cache all the files looked for,
whether the exist or not so that if they do exist and didn't,
the checksum also changes.
This gets complicated by the need to clean out hardcoded build
paths from the variable and that other layers can have site files.
This patch adds this functionality. A new variable, SITEINFO_PATHVARS
is added which controls which substitutions to make on the file-checksum
values to remove the hardcoded paths. Layers adding site files will need
to set this to a variable that has the layer path in it and is excluded
from task hashes (COREBASE is the one the core layer uses).
This patch will cause yocto-check-layer to fail for some layers
where site files are added yet the layer isn't a machine specific layer.
This is arguable correct since these additional site files apply to
all recipes and things from a layer like core could be changed by such
changes so it is right they should rebuild. There is a determinism issue
potentially there if not. meta-openembedded does have some such references
but looking at them they should move to core or likely just be removed as
most look obsolete anyway.
[YOCTO #13729]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of automated script conversion:
scripts/contrib/convert-overrides.py <oe-core directory>
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Introduce a new variable SDK_PS1 to customize prompt string for SDKs
when source script environment-setup-script. If variable SDK_PS1 is not
set or empty, nothing changed. Otherwise new PS1 with the value of
SDK_PS1 is used after source the sdk environment file.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The readelf binary is prefixed, so export READELF in the SDKs so that the
correct readelf binary can be used.
This fixes problems with the symbol extractor in Meson with multilib SDKs where
readelf can't be found correctly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SDKs for multilib configurations have multiple environment scripts, so
re-arrange the post-relocate hook invocation so that it runs the post-relocate
hooks after sourcing each environment script.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It's useful for the SDK to know exactly what TARGET_ARCH and TARGET_OS are,
specifically for SDK QA.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CMake, in it's infinite wisdom, when searching for libraries (using
find_library) will look inside the libraries PREFIX/lib, PREFIX/lib32, and
PREFIX/lib64. In a multilib SDK more than one of these will exist (potentially
all three) and obviously for a given build configuration only one of those is
valid. This search path is hard-coded deep inside CMake but by setting
CMAKE_FIND_LIBRARY_CUSTOM_LIB_SUFFIX we can bypass it and set an explicit
lib<SUFFIX> to use.
Do this by writing ${baselib} into the environment file, and then stripping
"lib" from this to obtain the suffix in the cmake-specific environment script,
which is then read in the CMake toolchain.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful for the post-relocate scripts to be able to see the SDK
environment, for example to see the values of CC, CXX etc. in order to
dynamically generate toolchain files.
To enable this, source the SDK environment script prior to calling the
relocate scripts.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if a post-relocate script fails, it fails silently. We should
be louder about this, as it likely indicates a broken SDK.
Print a message if a post-relocate script fails.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, we look only for scripts matching *.sh, which means we can't
write post-relocate scripts in other languages.
Expand this to allow any type of script.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A function is uses a mix of spaces and tabs. The rest of the file
uses tabs, so switch to tabs uniformly.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where /bin/sh is dash, the recent toolchain scripts change fails as the $(pwd)
usage in oe-init-build-env doesn't function correctly. Fix this by saving
and restoring the cwd and calling the script within its own directory.
This fixes meta-ide-support on dash based systems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The environment setup script generated in the build directory sets the PATH
variable by expanding ${PATH} which would have host paths filtered. Sourcing
this script to run runqemu will not work as it complains host stty (/bin/stty)
cannot be found.
To resolve this, the script no longer expands ${PATH} during generation time,
instead it will now source oe-init-build-env to initialize the build
environment so that all host paths will be preserved. Also be sure to prepend
STAGING_BINDIR_TOOLCHAIN to the PATH variable so that the toolchain from the
build directory can be found.
[YOCTO #12695]
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Recipes can now install post-relocation scripts which will be run when
the SDK is installed.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provide a descriptive error message and exit the environment-setup script,
when LD_LIBRARY_PATH is set on the host system.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
uclibc support was removed a while ago and musl works much better. Start to
remove the various overrides and patches related to uclibc which are no longer
needed.
uclibc support in a layer would still be possible. I have strong reasons to
believe nobody is still using uclibc since patches are missing and I doubt
the metadata even parses anymore.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CCACHE_PATH was added to the toolchain-scripts in commit
1d31ddb856a80ba9da1a64ed5d701dc0f7351ef7 without a detailed
explanation as to why. This commit removes that environment
variable as it's causing failures since the introduction of
host_gcc_version() to oe.utils in
d36f41e5658bbbb6080ee833027879c119edf3e0, as used by
uninative to determine NATIVELSBSTRING.
This causes errors when the host has ccache available in in PATH
- host_gcc_version() fails because ccache has been told to only
look for the compiler in CCACHE_PATH and can't find gcc in order
to check its version. Toolchain compilers aren't detected due to
the binaries being prefixed with the triplet of the target.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We use toolchain_create_sdk_version() in buildtools-tarball but
don't want the extra classes toolchain-scripts pulls in, therefore
split out a separate base class for this function which both
toolchain-scripts and the buildtools-tarball can inherit.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As things stand there are multiple races in the CONFIG_SITE handling
where checksums can change depending on whether site directories
exist or not when parsing happens. This is bad.
Secondly, there is a build race that occurs if you build virtuals
in parallel with the "main" recipe, since the main recipe is parsed
when the virtual is (since it sets variables like BBCLASSEXTEND)
and with the current code, it may look for files and directories
which could be created/destroyed which the loop is executing. This
is also bad.
The aclocal-copy directory should only ever be accessed by the call
from autotools.bbclass. This changes the parameter name to make it
clear and ensures all callers have the right usage, neatly avoiding
all the problems above. Also added better comments.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CFLAGS/CXXFLAGS in the SDK environment script adds debug-prefix mappings
that include staging area/work directories. Remove them since the SDK
shouldn't be aware of them.
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Otherwise architecture-independent pkg-config files such as wayland-protocols
won't be found in the SDK.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some shells (e.g. dash) do not support the source built-in. This
replaces it with the dot operator.
[ YOCTO #9535 ]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
in sdk,there are some utils in sysroot/host-os/bin, sysroot/host-os/sbin/,sysroot/host-os/usr/bin need to use, so add these three paths to PATH in env.sh.
Signed-off-by: Jun Zhang <jun.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If this is set when nativesdk-python is not installed, it will break the host
python, so it's better to handle this in python.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In the extensible sdk it was originally intended that the native sstate
would always be setscened as part of the sdk installation. However, the
soon to come "minimal" sdk won't do that.
A side effect of that is that pointing PYTHONHOME at the native sysroot
within the "bitbake workspace" won't work. For now only set PYTHONPATH
instead and continue using the python that comes from buildtools.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On Ubuntu-system, When sourcing the env.sh from an exported sdk, and
running a bogus linux command (for example "asd"), a core dump of
python is usually generated.
Unset the command_not_found_handle to fix it.
Signed-off-by: Fang Jia <fang.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is needed when we add nativesdk-gcc/binutil to an SDK. Being
present doesn't hurt in other cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
correct libc selection
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change ensures
that if another libc is used, the compiler correctly selects the right one.
[YOCTO #8025]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use MLPREFIX to fix:
| cat: /path/to/sysroots/lib32-qemux86-64/sysroot-providers/virtual_libc: No such file or directory
[YOCTO #7924]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The use of TCLIBC in TOOLCHAIN_NEED_CONFIGSITE_CACHE is problematic
since a multilib may have both uclibc and glibc for different multilibs
yet switching between them doesn't change TCLIBC. This would result
in "lib32-glibc" being attempted when lib32 was actually uclibc.
The fix here is to use the virtual providers which bitbake switches
to point correctly at the right things.
This does mean we need to resolve virtual providers but we can do this using
sysroot-providers.
[YCOTO #7607]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Single quotes prevent expansion of $sdkpathnative$bindir.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In multilib and baremetal configurations, this variable can cause a variety of
problems due to the use of TCLIBC. At least allowing it to be overriden
is a start and allows various configurations to avoid the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To add some flexibility to setting up the paths for the toolchain,
add some parameters. This initial use will be in order to point at
the buildsystem toolchain copied in by copy_buildsystem.py.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is necessary to have an SDK for developers who build their software with
ccache to speed up the compilation. Without resolving this, unfortunately the
compilation will fail for them.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When building the U-Boot the lack of a proper sysroot can trigger
following error:
,----
| arm-poky-linux-gnueabi-ld.bfd: cannot find -lgcc
| make[2]: *** [examples/standalone/hello_world] Error 1
| make[1]: *** [examples/standalone] Error 2
| make: *** [examples] Error 2
`----
Guillaume Fournier has posted a very complete analysis of the
problem[1].
1. https://lists.yoctoproject.org/pipermail/meta-freescale/2014-November/011270.html
The use of KCFLAGS makes the build of U-Boot work out of box, now that
it uses the Linux kernel build system.
Reported-by: Guillaume Fournier <gfournier@brioconcept.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #6951]
The TOOLCHAIN_CONFIGSITE_SYSROOTCACHE value was defaulting to the nativesdk
path and not the associated target path. Set the value in toolchain-scripts
to the target path.
Be sure to set the MLPREFIX within the meta-environment script as multilibs
are processed.
Update the config_site file name to use -BPN- not PN. Otherwise the
environment processing can't find the correct filename.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In a similar way to the previous script which adds support for native
environment scripts, this adds support for target environment scripts
too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes we require extra environment settings to be available on the
environment for proper SDK work. This were done, in past, using
'_append' tasks however with the split of the environment in a
canadian package this has been broken.
The easier and more flexible solution is to use environment subscripts
which are sources by the main script. These are now looked at:
$OECORE_NATIVE_SYSROOT/environment-setup.d/*.sh
and sourced.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was an error in the previous fix for the powerpc toolchain issue, this
should correct it (and simplify the code too).
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we build a general toolchain script we should add all the OS
variants to PATH, not just the current one. This is because some can
cross reference each other and if the triplet prefixed ld can't be found
for example, you recieve strange errors.
Doing this resolves bugs exposed during SDK testing.
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was still duplicated code in toolchain-scripts, this further cleans
up the functions to remove it. The now unused includedir parameter is also
dropped.
The final scripts do end up reordered slightly and the sysroot is parametrised
for the IDE scripts which is an improvement but should have no functional
difference.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code was clearly broken and isn't used, even by meta-darwin so we
might as well remove it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Alexander Kanavin
Jagadeesh Krishnanjanappa
Kai Kang
Ross Burton
Martin Kelly
Chin Huat Ang
Joshua Watt
Denys Dmytriyenko
Joshua Lock
Jacob Kroon
Stephano Cetola
Jun Zhang
Christopher Larson
Randy Witt
Fang Jia
Robert Yang
Andre McCurdy
Laszlo Papp
Otavio Salvador
Mark Hatle