| Age | Commit message (Collapse) | Author |
|---|
|
Now that PACKAGES_DYNAMIC is more standardised, starting with ^ anchors,
the variable manipulations performed by clsextend for multilib don't work.
This patch at least improves it to hack around the problem and enable
mulitlib builds to work again. If this code doesn't do the right thing, the
recipe is free to override the variable with the correct multilib case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* During the base kernel_do_deploy function the directory is
changed to DEPLOYDIR in order to do some cleanup and symlinking.
However, the directory is not changed back to the original
starting directory ${S} at the end. For append functions this
means that the starting directory is not ${S} as expected but
instead ${DEPLOYDIR}.
For functions like the do_deploy_append in
recipes-kernel/linux/linux-dtb.inc there is an assumption that
you are still in the source directory and not the DEPLOYDIR.
Without this change the .dtb files are not copied because the
check for the existence of ${DTS_FILE} which is a relative
path from the ${S} directory fails. This means that the .dtb
files are not copied into the deploy directory and subsequently
the deploy/images directory.
In the log.do_deploy file you will see lines like:
Warning: arch/arm/boot/dts/xxxxx.dts is not available!
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
Cherry-pick commit aeb53bd78991af9fbb60d64176ec864cfc2ddbb9
[YOCTO #3984]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
This patch contains two fixes:
* if the user wants to install the SDK in a directory that already
contains a SDK for the same architecture, a warning will be shown;
* when the symbolic links are relocated use -n option. Otherwise,
symbolic links to existing directories will be created in the
directory itself;
Cherry-pick commit b751ec137d0228b40a90e9e32b24f5cb5732225b
[YOCTO #3401]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
When relocating the SDK, applications using python will search for
python modules in the default location and will fail to start.
The below errors are thrown by gdb, for example:
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
In order to overcome this, add the PYTHONHOME variable to the
environment-setup script for both standalone toolchain and
adt-installer. No need to do that for meta-ide-support environment
script since this toolchain does not get relocated.
Cherry-pick commit db0a02492c2a53c1917b753bcf21c4ee7c0ecf59
[YOCTO #3839]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
support python packages with console-script setup
When using distutils for a python package based on a python-setuptools
installation script that sets up a console script, the header
of the console script created by setuptools points to the
python-native path.
The console scripts are commonly executed in the image, but not
in the sysroot environment. Therefore, the header of the
console scripts should point to the python interpreter in the
image.
Setuptools does not allow to set the path of the python
interpreter via some command-line argument.
Hence after the installation script ran, the distutils
class replaces the path in the console script files created by
the installation.
Signed-off-by: Lukas Bulwahn <Lukas.Bulwahn@oss.bmw-carit.de>
sgw - added \ to protect the space.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[ CQID: WIND00392947 ]
It is not good user experience that the self-extracting archive (.sh file)
has no execution permission by default.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The force_postinstall option was missing and some packages were
configured on target rather than on host at rootfs time.
(From OE-Core rev: dfadfaa0b38678029ffebe14f15e2dbc148cb1fb)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If runqemu (or qemu itself) fails we need to know why, so tee out to a
log file and print it when we can't find the qemu process or determine
its IP address.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the package architecture name is complex (e.g. with the meta-yocto-bsp
beagleboard machine and Poky, the architecture-specific package name is
"armv7a-vfp-neon"), rpm reports architecture names that contain
underscores instead of dashes, which when passed to oe-pkgdata-util
during complementary package processing did not match a valid pkginfo
path. Replacing the underscores with dashes again fixes the issue.
Note that this bug affects the danny branch and not master since the
substitution is already performed there in a different manner.
Fixes [YOCTO #3792]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
gnome-common is a build-only dependency so we should depend on the native
variant. This also resolves an (incorrect) GPLv3 license issue in gnome-common
at build-time.
This will also remove the pointless gnome-common-dev RRECOMMENDS in any -dev
package that uses gnomebase.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As locale packages are installed on the image, we should
be including them in the package/license manifest.
This ensures that the manifests are accurate and complete.
[ YOCTO #2461 ]
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Touch a file that is later greped to make sure it exists.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some bad logic in license.bbclass misses certain package level
LICENSEs.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #2138]
Commit 217584211625b1c496fe5b78aa4765ccf605d2b9 dropped the forced use
of FAT32 for the hddimg generation as it broke with very small images
(< 32MB). Unfortunately, left to its own devices, mkdosfs appears to select
FAT16 even for very large images, resulting in 2.2GB images being
generated as FAT16:
$ ls -lah core-image-lsb-sdk-atom-pc-20121010233936.hddimg
-rw-rw-r-- 1 dvhart dvhart 2.2G 2012-10-17 08:00 core-image-lsb-sdk-atom-pc-20121010233936.hddimg
$ file !$
file core-image-lsb-sdk-atom-pc-20121010233936.hddimg
core-image-lsb-sdk-atom-pc-20121010233936.hddimg: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 128, root entries 512, Media descriptor 0xf8, sectors/FAT 138, heads 64, sectors 4502496 (volumes > 32 MB) , serial number 0x50761926, label: "boot ", FAT (16 bit)
The result was a runtime boot error from SYSLINUX and a failure to boot
live images greater than 1GB in size.
While strictly speaking it is the cluster count that determines which
FAT size is used, that calculation requires more information than we
have readily available (such as sectors per cluster). If we let mkdosfs
determine sectors per cluster and just set a sane threshold above which
FAT32 is used, we get correct bootable images. With this patch the 2.2GB
core-image-lsb-sdk uses FAT32 and the 21 MB core-image-minimal uses
FAT16, and both boot in qemu successfully:
$ ls -lah tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg
-rw-r--r-- 1 dvhart dvhart 2.2G 2012-12-12 14:18 tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg
$ file !$
file tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg
tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 8, Media descriptor 0xf8, heads 64, sectors 4470304 (volumes > 32 MB) , FAT (32 bit), sectors/FAT 4357, reserved3 0x800000, serial number 0x50c902b7, label: "boot "
$ ls -lah tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg
-rw-r--r-- 1 dvhart dvhart 21M 2012-12-12 14:06 tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg
$ file !$
file tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg
tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 4, root entries 512, sectors 41408 (volumes <=32 MB) , Media descriptor 0xf8, sectors/FAT 41, heads 64, serial number 0x50c8ffec, label: "boot ", FAT (16 bit)
I have tested and booted core-image-minimal and core-image-lsb-sdk for
atom-pc with qemu-system-i386 using this patch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Joshua Immanuel <josh@hipro.co.in>
Cc: Przemek Czesnowicz <przemyslawx.czesnowicz@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Depending on the eglibc configuaration, the directory may or may not exist.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The compilation routine for the kernel has an explicit call to
build version.h, which works fine for most kernels, but the
location of it has recently changes.
commit d183e6f5 [UAPI: Move linux/version.h]
commit 10b63956 [UAPI: Plumb the UAPI Kbuilds into the user
header installation and checking]
moves the file to include/generated/linux/version.h and then to
include/generated/uapi/linux/version.h.
As a result kernel builds of 3.7 or bisection builds of intermediate
kernel commits will fail with:
make[2]: *** No rule to make target `include/linux/version.h'. Stop.
Making the explicit version.h build conditional on the version, or
via a file test would fix the problem, but it introduces some complexity
to the build.
Even without an explicit call to build version.h, it is always produced
by the kernel build, so it can simply be removed.
This extra make line was originally so that the kernel version could be
determined, so that then different instructions could be executed depending
on whether it was a 2.4 or 2.6 kernel. Since we no longer support 2.4, this
code is no longer needed.
[YOCTO: #3293]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should always leave the tree on a BSP branch or master when
do_validate_branches completes to avoid modifying version tracked
files are part of the build process. Modifying these files will lead
to errors when changing branches, since the contents would be lost.
This is evident in the case that a the meta branch is reset to a
known SRCREV and the tree was left on the meta branch. This branch
tracks the meta/meta-series, and other artifacts of the original
tree construction. When the build process runs, it updates these same
files, which creates a conflict when switching branches.
This has been fixed in the tree construction scripts to not track
these files, but a secondary fix is also required of not leaving
the build on these branches, to allow arbitrary trees to be built.
[YOCTO #3413]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also ensure that we always cleanup the temporary install manifest files,
some of them will cause problems if they exist in multiple install
attempts.
Finally verify that the lists remain uniquely sorted otherwise the
complementary install may install the same files numerous times,
triggering a failure.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids errors where gcc/binutils get installed to the native sysroot
in the same location for multiple package architectures. Ultimately making
these native recipes with ${PACKAGE_ARCH} appended to PN will resolve this
but hide the warnings until this gets sorted out.
Also hide the python and docbook catalog warnings since they're known about,
nothing to worry about and we'll aim to clean them up properly in the 1.4 cycle.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, path components like // could break comparisions with the whitelist leading
to warnings being displayed to the user unintentionally.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
some packages use M4 variable from environment and sometimes
its hardcoded to /usr/bin/m4 if not found in environment. Lets
define it such that it is picked from path
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order for the RPATHs in 32bit toolchain binaries to be relocated
properly, chrpath >=0.14 is needed.
[YOCTO #3161]
[YOCTO #3201]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the distro check functions for the change of nativesdk
being a suffix to a prefix. Also added crosssdk as another
case for converting to PN for matching in the distro_tracking
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
explode_dep_versions change
We need to iterate over the dictionary pulling out the values, not take the top
level keys. If we don't do this, we end up with dependencies on the values of
PACKAGES, not library dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, circular dependencies are found when attempting to build
multilib versions of qt4 (or bitbake world in a multilib enabled build).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Versions earlier than 0.14 can't cope with 32 bit binaries on a 64 bit
system and vice versa. This results in problems for certain SDKMACHINE
combinations on certain hosts. By ensuring we build
chrpath-replacement-native we avoid this problems and the binaries work
correctly.
[YOCTO #3161]
[YOCTO #3201]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This converts the option to maintain the existing behaviour unless the option is
specified. We do specify the option during the builds themselves to ensure what
the users expects is built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test for network error in sanity.bbclass was negated.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bb.utils.explode_dep_versions function has issues where dependency information
can be lost. The API doesn't support maintaining the correct information so this
changes to use a new function which correctly handles the data.
This patch also fixes various points in the code to ensure that we do not have any
duplicates in things that use explode_dep_versions.
A new sanity test to test the contents of the R* variables is also added.
[Some changes from Mark Hatle <mark.hatle@windriver.com>]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
People keep copying this code and its confusing and unnecessary. Remove the
bad examples to try and stop this happening.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In deb and ipk, < means <=, while > means >=... there is a different
operator << and >> that means < and >, so we map them when constructing
the packages.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the STAGING_DIR_KERNEL is set in the multilib.conf, then it may be
set incorrected. The evaluation happens before TMPDIR and LIBC are
defined in other components.
Moving the definition process to the multilib.bbclass ensures that
everything has been loaded before it is set.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors. Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This ensures consistent build results and avoids build failures when compiler flags
change for example.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_package is a machine specific task at the moment due to packagedata. This means
do_package tasks and their dependencies rerun between different machines
with various duplicate file installations. There are plans to fix this but they're
too invasive before release.
This patch relaxes the whitelist for sstate duplicate file detection to account
for this. Post-release, we re-enable stricter settings once do_package is not
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This requires the changes to bitbake.conf that allow parsing of
license.conf.
As we should now be parsing license.conf, we can move some globals
out of license.bblcass and into the conf file.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The variable mentioned in license.conf is LICENSE_PATH. The variable
used in license.bbclass is LICENSE_DIR. Conforming to what is in
license.conf
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If we fail a network test, a special flag is set in the SanityChekFailed
event. This helps Hob identify the network error properly and display
a special message to the user.
[YOCTO #3025]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- add check_bblayers_conf bitbake function which does the bblayers.conf
v4 -> v5 update if necessary (every layer should make its specific
bblayers.conf upgrades appending to the check_bblayers_conf function)
- we ask the user to re-run bitbake because we can't trigger reparsing
without being invasive
[YOCTO #3082]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This reverts commit aa66ef6598c84231577d139ec7be413e73fac2b1 since
bdwgc-native fails to build after it. Anything which runs with a
sub-configure will fail after this change. It therefore needs
rethinking.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix autotools.bbclass to use relative paths for acpaths instead of
absolute ones. Since absolute paths may cause potential autoreconf
error like:
Can't exec "/bin/sh": Argument list too long ...
This error occurs while building coreutils with long TMPDIR, because
it has bunch of m4 files need to be expanded.
[YOCTO #2766]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Based on the previous commit 604d46c686d06d62d5a07b9c7f4fa170f99307d8
(Convert tab indentation in python functions into four-space), the
cml.bbclass was not converted, and in order to properly extend it
with external bbappend's it needs to be converted.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The platform and platform_extra will be written to /etc/rpm/platform,
the rpm's arch has changed the "-" to "_", so the value in platform
should also be updated.
[YOCTO #3159]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no initial_solution.manifest in the second build when
incremental rpm image generation, since the initial solution has been
skipped. So we should check it before cat it.
[YOCTO #3128]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Suppress this by removing the unwanted -i.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Chase Maupin
Hongxu Jia
Lukas Bulwahn
Jackie Huang
Laurentiu Palcu
Paul Eggleton
Ross Burton
Elizabeth Flanagan
Mark Hatle
Darren Hart
Stefan Herbrechtsmeier
Bruce Ashfield
Otavio Salvador
Khem Raj
Saul Wold
Bogdan Marinescu
Constantin Musca
Wenzong Fan
Jason Wessel
Robert Yang
Phil Blundell