aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools/installer
AgeCommit message (Collapse)Author
2013-03-04recipes: Fix ALLOW_EMPTY with no package specifiedRichard Purdie
There are various usages of ALLOW_EMPTY with no packages specified. This is not recommended syntax, nor is it likely to be supported in the future. This patch improves the references in OE-Core, either removing them if they're pointless (e.g. when PACKAGES="") or specifying which package it applies to. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-25Split do_packagedata task from do_packageRichard Purdie
Currently, do_rootfs has a dependency on all the do_package output being present due to its usage of the pkgdata directories. This means that if you run: bitbake xxxx-image -c rootfs you end up having to fetch and unpack all the do_package data which is usually large and inefficient. It also means rm_work has to leave all the do_package data lying around so rootfs works. This patch splits the actual creation of the pkgdata directory off into a separate task, "packagedata" which happens immediately after do_package. We can then remap the dependencies so this task is depended upon, not do_package. Sstate can then be programmed not to require do_package at the appropriate times. Whilst this patch doesn't do so, it opens the possibility of rm_work wiping out the do_package output from WORKDIR as long as it also removed the do_package stamp (both normal and setscene variants) and allowing more space savings with rm_work which has been regularly requested. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-12-06populate_sdk_base, adt_installer_internal: fix issue on older distributionsLaurentiu Palcu
This patch addresses an SDK installer issue on older distributions if the installation takes place in another directory than the default one. In fact, is all about the 'file' utility version used for determining if a file is a text file. For example, for a perl script, newer 'file' versions return: "...script, ASCII text executable" while older versions return: "...script text executable" Hence the regex pattern didn't match the scripts. Also the patch contains two unrelated minor fixes: * return an exit code of 1 instead of -1 when installation machine is not supported. That because on an older distribution we also get this error message: "exit: 9: Illegal number: -1"; * remove unnecessary $SUDO_EXEC prefix to grep; [YOCTO #3538] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-18Fix the first line typo of adt-installerJessica Zhang
[YOCTO #3384] Signed-off-by: Jessica Zhang <jessica.zhang@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-24adt-installer: add sudo when relocating symlinksLaurentiu Palcu
This is needed if installation is done in a directory that needs root privileges. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-21SDK: relocate symlinks tooLaurentiu Palcu
The directory usr/libexec/ in the SDK sysroot contains the default symlinks to the toolchain binaries and these, too, need to point to the correct toolchain path. [YOCTO #3090] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21adt-installer: ensure directory exists before copying/removingLaurentiu Palcu
If the installation is done in a directory which already contains a valid installation, opkg will not install anything and the moving the contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will throw some errors. However, the install directory will not be affected. This patch will ensure that the /install/dir/opt/poky/1.2 exists. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21SDK: fix installation into symlinked directoriesLaurentiu Palcu
The SDK installation scripts should not canonicalize symlinked directories because the entire relocation would be done to the directory to which the symlink points. Instead, if the installation is a symlink, use that path to relocate the binaries. For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is done now. [YOCTO #3102] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21adt-installer: fix package installation issueLaurentiu Palcu
When the cross canadian toolchains are installed, for different architectures, they might contain common files. This leads to installation failures since the opkg, by default, does not overwrite files. This issue happens, for example, for binutils packages (that contain the same locale files) or gdb (which installs some syscalls xml files). The locale files could be removed from the binutils cross-canadian package but we cannot do the same for the syscalls GDB files which are used by GDB to display user friendly names for the syscall numbers. Hence, the best solution is to force opkg to overwrite these files. [YOCTO #3109] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-05adt-installer: Allow changing YOCTOADT_REPOElizabeth Flanagan
YOCTOADT_REPO within adt-installer.conf was hardcoded to http://adtrepo.yoctoproject.org/${SDK_VERSION} This allows it to be overriden in local.conf by setting ADTREPO = "http://adtrepo.yoctoproject.org/${SDK_VERSION}" I'm also fixing a bad rm in do_populate_adt. The file name that is being rm'd is wrong. Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-31nativesdk: Switch to using nativesdk as a prefix, not a suffixRichard Purdie
As discussed on the mailing lists, using a suffix to package names is hard and has lead to many recipes having to do PKGSUFFIX games. Its looking extremely hard to scale nativesdk much further without hacking many recipes. By comparison, using a prefix like multilib does works much better and doesn't involve "hacking" as many recipes. This change converts nativesdk to use a prefix using the existing multilib infrastructure. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-28runqemu-export-rootfs and friends: don't put pseudo db in target fsPeter Seebach
In a few places, we have scripts which use <rootfs>/var/pseudo for the pseudo state directory controlling a given filesystem. This seems possibly risky because it means that stuff running under qemu or whatnot could wipe out the data being used to handle that rootfs. Move this to: <rootfs>/../$(basename_rootfs).pseudo_state to avoid problems. This also solves at least one case (not directly hit by yocto's tree) wherein you could end up trying to remove a rootfs while pseudo was using a database inside that rootfs, and thus the remove would fail. Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
2012-08-17adt-installer: add support for relocatable SDKLaurentiu Palcu
Since we made the SDK relocatable, we have to add this functionality to adt-installer too. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-16Update proto -> protocol for recipesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-04-10adt-installer: Fixed ppc kernel naming.Lianhao Lu
1. Fixed the ppc kernel naming. 2. Disabled opkg shared library to avoid runtime opkg-cl launching error. 3. Adjusted the variable sequence in adt-installer.conf Fixed bug [YOCTO #2233] Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2012-03-30adt-installer: Adapted environment file name for powerpc.Lianhao Lu
Adpated to the new environment file name for powerpc, due to the oe-core commit c2d96179. Fixed bug [YOCTO #2055]. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-03-08adt-installer: Corrected wrong environment file names.Lianhao Lu
[YOCTO #2055] 1. Corrected the wrong environment file name for powerpc. 2. Removed unnecessary variables in adt_installer.conf. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-02-26More quoting fixesMartin Jansa
* We have various variables which are either not quoted at all or are half quoted. This patch fixes the bad exmaples so everything is consistent. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-02-01Fix the issue that adt-installer tar ball is not regenerated if sstate is ↵Jessica Zhang
on, and other minor bug fixes Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
2012-01-19adt-installer: install autoconf(/automake)-nativesdkLianhao Lu
[YOCTO #1909] Install autoconf-nativesdk and automake-nativesdk to host. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2012-01-03Add Upstream-Status to patchesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2011-10-10qt-demo-init/linux-firmware/adt-installer: Convert to Use allarch class fileRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-08-31Fix powerpc term and provide more template for different archesJessica Zhang
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-08-31Revert "Fix adt-installer for consistent naming for powerpc and add all arch ↵Jessica Zhang
template for installation" This reverts commit ae4ad20edbb6ea023155f7ae2b00871d479e370d. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-08-26[YOCTO #1396] Fix adt-installer for consistent naming for powerpc and add ↵Jessica Zhang
all arch template for installation Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
2011-08-23adt-installer: Removed the hard coded repo url.Lianhao Lu
[YOCTO #1380] Removed the hard coded repo url in opkg configuration files. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2011-06-30Add umask task controlMark Hatle
Bitbake now allows the umask to be specified per task. The following tasks will have a umask of 022 set by default: do_configure do_compile do_install do_package do_populate_sysroot do_rootfs do_configure and do_compile need a umask of 022 set because -many- recipes directly copy generated files out of recipe's build directory. Instead of fixing each existing and future recipe, it was shown to be much easier to just set the umask. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-05-19Add adt repo checkingJessica Zhang
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
2011-05-19extract bitbake config setting into data_define, use more variables ↵Jessica Zhang
replacing hardcoded values Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
2011-05-04poky-default-revisions: move the SRCREV to recipe fileYu Ke
in this case, those non poky distro can also use these recipe normally Signed-off-by: Yu Ke <ke.yu@intel.com>
2011-04-20adt_installer_internal: Remove hardcoded Poky referencesRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-04-20POKY_NATIVE_SYSROOT -> OECORE_NATIVE_SYSROOTRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-04-20Rename poky-image-* -> core-image-* and task-poky-* -> task-core-*Richard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-04-20Replace POKYBASE with COREBASERichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-03-17ADT: bug fix for nameing and do_patch sequenceLiping Ke
This patch is for fixing the x86-64 image name bug and also, do_patch must be done before do_deploy. Signed-off-by: Liping Ke <liping.ke@intel.com>
2011-03-14adt: fix ppc/powerpcc naming bugLiping Ke
for ipk files on ppc, the name should be powerpc. So does the environment file name. For the tar file name, it should be ppc. This patch is to correct the arch/machine name pair. Related Bug#864 Signed-off-by: Liping ke <liping.ke@intel.com>
2011-03-10Disable wget server side cacheLiping Ke
We found some proxy server has wrong cache for long http file name. It will cause fetching wrong ipk files from adt repo. To avoid this, we use wget options --no-cache to disable all server side cache. It will make the fetch speed slower, yet correct always. Signed-off-by: Liping Ke <liping.ke@intel.com> Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
2011-03-08adt: removed unused repo source and opkg optionsLiping Ke
opgk option --force-overwrite is only a workaround for bug #547. Now this bug is gone, so remove this option. and also, the first opkg repo source is not useful, remove it. Signed-off-by: Liping Ke <liping.ke@intel.com>
2011-03-07adt: Update to svn r596 to fix symbolic link issuesLiping Ke
See the longlinksfix patch for details but symlinks over 100 chars long were broken in sdk tarballs and its due to problems in the inbuilt tar in libbb in opkg. svn r596 has already fixed the problem. Signed-off-by: Liping Ke <liping.ke@intel.com>
2011-03-03Fixup merge error and apply cleanupsRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-03-03ADT: Bug fix for Suse LinuxLiping Ke
On Suse linux11.2, we found when using sudo, we must add -E opts to preserver some network proxy environment settings. Otherwise, opkg-cl can't access files behind firewall. [bug #785] Also, we need to add absolute path when sourcing files. Fix for [bug #786] Signed-off-by: Liping Ke <liping.ke@intel.com>
2011-03-03Add libtool-nativesdk for ADTLiping Ke
We need to add libtool native sdk support in ADT installer. This patch fix #bug 791 Signed-off-by: Liping Ke <liping.ke@intel.com>
2011-03-02ADT: Fix several bugs for adt installerLiping Ke
Two bugs are found 1) image download file path is not correct. So even if file is downloaded already, it can't be detected. 2) several images now are renamed, such as sato-dev, sato-sdk, we need to change the name accordingly. Signed-off-by: Liping Ke <liping.ke@intel.com>
2011-02-21ADT: Fix check_result script cond comparison bugLiping Ke
When meeting errors, the return number can't be directly compared with -1. Actually, it might be represented as 255. The correct way is to compared it with 0. If the result is non-zero number, we meet error. This patch is for fixing [BUGID #742] Signed-off-by: Liping Ke <liping.ke@intel.coom>
2011-02-08adt-installer: change to adopt the adt public repo directory layoutJessica Zhang
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
2011-01-12adt-intaller feature implementation, including the bitbake recipe file for ↵Liping Ke
creating the intaller tar file under /tmp/deploy/sdk, and the adt-installer script files and config files, set the reference to adt repo entry empty before it's setup Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 08:11:21 +0000