| Age | Commit message (Collapse) | Author |
|---|
|
This was found to cause issues on the Yocto autobuilders and fixes do_compile
failures when guile-native has been relocated.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ALL_MULTILIB_PACKAGE_ARCHS to build arch list
We need consistent configuration files for opkg so we might as well always use
the full list. This is equal to PACKAGE_ARCHS in the non-multilib case.
This fixes various multilib failures with ipk multilibs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the do_unpack task is re-executed, the sed_done stamp was not removed, the
sed commands wouldn't re-run and the build would fail in do_compile. This
patch ensures the stamp is in ${S} and that we clean that directory
when unpack runs so it is a build from sctatch at that point.
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The sed command run during do_compile isn't idempotent. This change fixes it
so that it is and the compile task can be re-executed.
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a patch patching both configure and configure.in. Since the recipes
all autoreconf, this is pointless and means subsequent patch tasks fail.
The fix is to only patch configure.in.
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were puzzling failures when you make a force recompile of any gcc
component. The error was in do_configure with cross-compilation badness
being detected in config.log files.
gcc is different in that many of the config.log files are generated during
the do_compile phase. This means this host contamination issue has always
been present but only shows up on a rebuild.
The fix is to force the appropriate configuration variable to "none required"
then gcc won't look in the bad locations.
[YOCTO #2279]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There can be a conflict between the nativesdk libc and the host system's
libc. It is assumed the nativesdk version is of an equal or higher version.
This is a particular issue for pseudo if its loading a system binary
since the system's libc might be used of an older verison which would
then confuse libpseudo.so when loaded as a preload.
To avoid this, set LD_LIBRARY_PATH so the nativesdk libc is always
used.
Since we now use --without-rpath, we can remove the MAKEOPTS RPATH workaround.
[YOCTO #2299]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When guile-native was relocated, there were messages like:
;;; note: source file /srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/build/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/eval.scm
;;; newer than compiled /srv/home/pokybuild/yocto-autobuilder/yocto-slave/fri2/build/build/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/eval.go
and this confuses things like the autogen-native "guile --version"
check. This patch ensures the wrapper script sets the necessary
variables correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This module is needed by python scripts from createrepo native package.
[YOCTO #2134]
RP: Add missing DEPENDS on python-native
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is done because of this change in gdbm:
"gdbm: Package compat libs in gdbm-compat"
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This brings the version comparision within opkg-utils into sync with that
in opkg itself.
[YOCTO #2233]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the toolchain is reused from sstate and ccache is installed, build failures
were occuring due to gcc trying to access the original sysroot rather than the
new one, particularly if the old sysroot existed but was not readable by the
current user.
This turns out of the an issue inside gcc to do with preservation of the sysroot
option. See the gcc patch for more details. It only triggers when preprocessed
sources are used which happens when ccache is used.
The same issue occurs with c++ and c++-cpp-output so the same fix is applied there.
[YOCTO #2074]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If this value is not set to 1, then systems with some 32-bit libraries
but no 32-bit version of libgcc installed will have pseudo-native fail
at do_compile. It should only really be set to 0 by those who know what
they are doing.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Many of the standard C++ library include files have been edited to no
longer include <unistd.h> to remove namespace pollution in gcc 4.7, so
we need include <unistd.h> manually sometimes.
More information:
http://gcc.gnu.org/gcc-4.7/porting_to.html
[YOCTO #2278]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
[Updated patch header - sgw]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In lib/rpmts.c we need to make sure to look for missing dependencies,
such as /bin/sh, in both the providename and filepaths DB. Previously
the system would key off an initial '/' and only look in the filepaths DB.
This causes problems when a package such as "bash", has a Provides: /bin/sh.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[Yocto #2251]
Add --without-rpath to avoid embedding rpaths into the pseudo
components.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add intercept multilib header for pyconfig.h in python.
This is part of the bug fixing [YOCTO #2216].
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python-nativesdk could fail with:
| /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/sysroots/x86_64-linux/usr/bin/python: /lib64/libc.so.6: version `GLIBC_2.14' not found (required by /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-ppc/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/python-nativesdk-2.7.2-r1.9/Python-2.7.2/libpython2.7.so.1.0)
| make: *** [sharedmods] Error 1
which is caused by the fact LD_LIBRARY_PATH is being set to include WORKDIR
when calling HOSTPYTHON. HOSTPYTHON is from python-native and needs no such
help so the easiest fix here is not to set crazy LD_LIBRARY_PATH values
since we should never be running anything from WORKDIR given the way we build
things.
The patch clears out the RUNSHARED variable which would contain the
LD_LIBRARY_PATH value prior to this patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* otherwise it sometimes finds host's expat
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
|
|
After successfully installed some lib32 multilib packages into the
x86-64 image, we just found that the file content of /var/lib/opkg/status in
rootfs changed after the very 1st boot, many lib32 related packages information
are missing in that file.
The missing arch "x86" in arch.conf cause the above problem. Adding the
condition for the content of arch.conf when enable multilib. If build
multilib image, "ALL_MULTILIB_PACKAGE_ARCHS" will be used instead of
"PACKAGE_ARCHS".
[YOCTO #1522]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
|
|
1. Fixed the ppc kernel naming.
2. Disabled opkg shared library to avoid runtime opkg-cl launching
error.
3. Adjusted the variable sequence in adt-installer.conf
Fixed bug [YOCTO #2233]
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
The git may fail to rebuild when perl's Config.pm or config.h changes,
this is because Makefile detects that perl/perl.mak is out of date.
Remove perl.mak to let Makefile regenerate it would fix the error.
Both git and git-native have this problem.
To reproduce the error: (On x86_64 host)
$ bitbake git-native
$ touch tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.2/Config.pm
$ bitbake git-native -ccompile -f
[YOCTO #2156]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Data from 64b target is truncated by 32b host. This patch makes type of data
buf in host same as target.
[YOCTO #2221] got fixed.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
[Bumped PR - sgw]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes [YOCTO 2236]
With recent Linux kernel headers, such as 3.3 in Fedora 16, the linux/ext2_fs.h
header has been removed. This causes compile failures for syslinux-native.
Backport a fix to address this from syslinux-4.06-pre3.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Ross Burton <ross.burton@intel.com>
CC: Joshua Lock <josh@linux.intel.com>
|
|
This Fixes [Ycoto #2223] bug.
The gcc osdir is obtained in the do_install by invocation of
command "gcc -print-multi-os-directory". For x32 it returns gcc
osdir for the default abi which is x86_64. Fix this by adding
target abi parameter to the gcc command line to get correct gcc
osdir with invocation of command "gcc -mx32 -print-multi-os-directory"
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
A comment in the binutils sources indicate that it should support all of the
-march= parameters that gcc supports. The tune validations noted that
gas failed on -march=armv5e.
It is not yet clear to me if this patch belongs upstream or not.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Fix some library dependency issues:
* Disable lzma as xz-native is unstated in DEPENDS
* Disable bzip2 for native as it is in ASSUME_PROVIDED and thus isn't
available when elfutils-native is normally built, but if it gets
rebuilt the link will be made; plus we don't need it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Fixes communication between gdbserver and gdb-cross
by using the same expat settings for both recipes.
* Adds missing build dependencies for expat/expat-native.
* Adds missing glibc-thread-db runtime recommendation
to gdbserver, which was set only for gdb.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Further Details are in patch itself
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
of memory
update_to_1.95.patch was generated by making a diff bewteen the 1.4.1 release
and the latest 1.9.5 version in the cvs repo:
http://genext2fs.cvs.sourceforge.net/viewvc/genext2fs/genext2fs/genext2fs.c?revision=1.95
The patches 0001-0019 come from mailing list of genext2fs-devel
http://sourceforge.net/mailarchive/forum.php?forum_name=genext2fs-devel&max_rows=100&style=flat&viewmonth=201106
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
This Fixes bug: [YOCTO #2176]
This fixes the following issue as mentioned in the bug:
If nasm-native has to be rebuilt (due to a signature change) it will fail:
| checking for a BSD-compatible install... /usr/bin/install -c
| /media/large/tmp/work/x86_64-linux/nasm-native-2.07-r1/nasm-2.07/configure:
line 4261: syntax error near unexpected token `-W'
| /media/large/tmp/work/x86_64-linux/nasm-native-2.07-r1/nasm-2.07/configure:
line 4261: `PA_ADD_CFLAGS(-W)'
| ERROR: oe_runconf failed
NOTE: package nasm-native-2.07-r1: task do_configure: Failed
The failure appears to be caused by do_patch_fixaclocal being run a second time
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix runtime error occurred e.g. with docbook-to-man calls:
grep: character class syntax is [[:space:]], not [:space:]
grep: character class syntax is [[:space:]], not [:space:]
jw: There is no frontend called "/docbook/utils-0.6.14/frontends/docbook".
See also:
<https://qa.mandriva.com/show_bug.cgi?id=61127>
Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adpated to the new environment file name for powerpc, due to the oe-core
commit c2d96179.
Fixed bug [YOCTO #2055].
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rpm links to libmagic from file so it needs to be listed in DEPENDS else we
can have race conditions causing build failures such as those seen on the
autobuilder recently.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes multilib issues if you try for example to use a BASELIB of /lib32
which wouldn't work without this change since the compiler install location
is taken from gcc -print-multi-os-directory which can still turn out to be
"/lib".
The reason is that a 32 bit gcc has no multilib code enabled and will always
return "." as that value rather than "../${base_libdir}" which our changes
to gcc enable and return in 64 bit mode.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The various local patches have made it into upstream, so we update
the build files and jump to pseudo 1.3. This also includes a popen()
fix which fixes some edge cases that caused failures trying to check
git branches and the like.
[Yocto bug #2181]
Signed-off-by: Seebs <peter.seebach@windriver.com>
Updated the pseudo_git.bb to match.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Cleaning up non shipped empty directories.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this build of autogen-native break if the guile-native package has been
recloated.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you install the top-level python package only on a minimal
system which has no other python packages installed then python
is not functional at all. Without any extra packages installed
this error is seen:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 64, in <module>
import traceback
ImportError: No module named traceback
Installing python-lang only partly fixes the problem as this
error still exists:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 569, in <module>
main()
File "/usr/lib/python2.7/site.py", line 551, in main
known_paths = addusersitepackages(known_paths)
File "/usr/lib/python2.7/site.py", line 278, in addusersitepackages
user_site = getusersitepackages()
File "/usr/lib/python2.7/site.py", line 253, in getusersitepackages
user_base = getuserbase() # this will also set USER_BASE
File "/usr/lib/python2.7/site.py", line 243, in getuserbase
USER_BASE = get_config_var('userbase')
File "/usr/lib/python2.7/sysconfig.py", line 520, in get_config_var
return get_config_vars().get(name)
File "/usr/lib/python2.7/sysconfig.py", line 400, in get_config_vars
import re
ImportError: No module named re
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When qemu build failed, we can see such messages:
You need libGL.so and libGLU.so to exist in your library path and the
development headers for SDL installed to build qemu-native.
Ubuntu package names are: libgl1-mesa-dev, libglu1-mesa-dev and
libsdl1.2-dev
These pkgs have different names on Fedora distributions, and Fedora is
one the
main linux distributions, so add Fedora package names.
The following Fedora versions have these pkgs:
Fedora 9 64bit
Fedora 13 32bit
Fedora 13 64bit
Fedora 16 64bit
[YOCTO #2174]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed non-shipped empty directories:
-${prefix}/${TARGET_SYS}
-${libdir}/../lib
-${prefix}/include
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The target dependency DEPENDS_sharprom does not belong in this
core recipe and should be moved to a .bbappend file in the appropriate
layer if still required.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gdb-cross-canadian was linking with static version of libpython
and looking for build host python when run. This could be mismatch
between python-nativesdk and build host provided python. So we
make it consistent to always use python-nativesdk
Instead of adding bunch of -L we add -rpath and -rpath-link
so that gdb finds all needed libraries in SDK and does not
reach out into host
This should fix yocto PR# 2077 as well.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1. Corrected the -nativesdk package namings.
2. Fixed package QA warnings:
WARNING: QA Issue: non -staticdev package contains static .a library:
libgcc-nativesdk-dev path
'/work/x86_64-nativesdk-pokysdk-linux/libgcc-nativesdk-4.6.3+svnr184847-r23/packages-split/libgcc-nativesdk-dev/opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/x86_64-pokysdk-linux/4.6.4/libgcc.a'
WARNING: QA Issue: non -staticdev package contains static .a library:
libgcc-nativesdk-dev path
'/work/x86_64-nativesdk-pokysdk-linux/libgcc-nativesdk-4.6.3+svnr184847-r23/packages-split/libgcc-nativesdk-dev/opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/x86_64-pokysdk-linux/4.6.4/libgcc_eh.a'
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set PKGSUFFIX in nativesdk.bbclass for correct variable name expansion.
This would fix bunch of "not shipped" packaging warnings in "-nativesdk"
recipes. And also bumping the corresponding PR.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed package QA warnings.
WARNING: QA Issue: non -staticdev package contains static .a library:
gdb-cross-canadian-i586 path
'/work/x86_64-nativesdk-pokysdk-linux/gdb-cross-canadian-i586-7.4-r6.3/packages-split/gdb-cross-canadian-i586/opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/lib/libiberty.a'
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed the "not shipped" packaging warnings.
WARNING: For recipe pseudo-nativesdk, the following files/directories
were installed but not shipped in any package:
WARNING: /opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/var
WARNING:
/opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/var/pseudo
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a couple common typoes, all contained within comments so there
should be no effect on functionality.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed bug [YOCTO #2152].
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Andrei Gherzan
Paul Eggleton
Robert Yang
Mark Hatle
Lianhao Lu
Martin Jansa
Xiaofeng Yan
Zhai Edwin
Darren Hart
Nitin A Kamble
Andreas Oberritter
Khem Raj
Dexuan Cui
Steffen Sledz
Peter Seebach
Gary Thomas
Robert P. J. Day