summaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools
AgeCommit message (Collapse)Author
2014-01-28unfs3, unfs-server: Replace all instances of unfs-server with unfs3Jason Wessel
Other recipes dependencies and even some comments need to be updated for the removal of unfs-server and the replacement with unfs3. The unfs3 is a complete drop in replacement providing all the prior functionality of NFSv2 but also adding NFSv3. [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28unfs3: Add a NFSv3 user mode server for use with runqemuJason Wessel
The user mode nfs server allows the use of runqemu without any root privileges and may even be accelerated with kvm. Example: runqemu-extract-sdk tmp-eglibc/deploy/images/qemux86-64/core-image-minimal-qemux86-64.tar.bz2 rootfs runqemu qemux86-64 `pwd`/rootfs nographic slirp kvm [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28dpkg: use systemd service for first boot configurationChen Qi
Use a systemd service file for first boot configuration for dpkg based images which has 'package-management' in its IMAGE_FEATURES. [YOCTO #5719] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28run-postinsts: Add systemd service fileRoss Burton
This patch mainly adds a systmd service file for run-postinsts, which is started at first boot to run the post-install scripts. Apart from this, this patch also modifies the installation location of run-postinsts to ${sbindir}. This is because this script would be used by both sysvinit and systemd based images. So it's more reasonable to make it locate under ${sbindir}. [YOCTO #5719] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28run-postinsts: remove the init script after a clean start-upChen Qi
If we enable ipk/deb package back-end, and we have 'package-management' in our IMAGE_FEATURES, then the /etc/rcS.d/S99run-postinsts would still exist in our system after a clean start-up. The initial design for run-postinsts requires the related init script to be removed if there's no more post-install script left in the system. This patch fixes this problem. [YOCTO #5718] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28opkg-utils: Add RPROVIDES/RREPLACES/RCONFLICTS to fix upgrade-pathMartin Jansa
* now with update-alternatives-cworth completely gone should correctly replace it on target as well Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28cmake: Fix freetype detectionMartin Jansa
* since last freetype upgrade cmake cannot detect it * e.g. webkit-efl requires freetype and is failing because of this Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-28distcc: add systemd supportChen Qi
Add systemd support for distcc. These unit files mainly use the same files in Fedora 20 as a reference. [YOCTO #4420] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-23libtool-cross/native: Force usage of bash due to sstate inconsistenciesRichard Purdie
Scenario: a) libtool script is built on system with bash as /bin/sh b) machine B installs sstate from build a) c) machine B has dash as /bin/sh In this scenario, the script fails to work properly since its expecting /bin/sh to have bash like syntax and it no longer does have it. This patch forces the configure process to use /bin/bash, not /bin/sh and hence allows the scripts to work correctly when used from sstate. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-23Revert "e2fsprogs/populate-extfs.sh: fix a problem on dash"Richard Purdie
This reverts commit 22f90c5aec4f0b0360d1d960226f9965d83d589b. This causes build failures with: | dirname: missing operand | Try 'dirname --help' for more information. under some circumstances.
2014-01-22libtool: remove the unrecognized configure optionChen Qi
Remove the unrecognized configure option '--with-sysroot' to avoid build time warnings. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-22adt_installer: do not install rootfs if target is not selectedLaurentiu Palcu
Currently, if YOCTOADT_TARGETS does not contain an architecture but the rootfs/machine settings are uncommented, then the rootfs is installed and adt will throw an error because is not able to find the toolchain environment script. This patch will: * not allow to install a target rootfs if the toolchain for the target architecture is not selected; * uncomment the target rootfs/machine settings for the other architectures since it's easier for the user to just add a new architecture in YOCTOADT_TARGETS and have the target rootfs installed; [YOCTO #5727] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21e2fsprogs/populate-extfs.sh: fix a problem on dashRobert Yang
The dash can't handle the or [[ in parameter expansion, for example: A=/usr/bin/[[ B=[[ C="${A%$B}" The C should be "/usr/bin" in common, but it will be /usr/bin/[[ on dash, use dirname to fix it. NOTE: There are 3 lines about parameter expansion, only fix the DIR="${DIR%$TGT}" since the other 2 works will and are very useful in this case. [YOCTO #5712] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21guile: don't use the identifier 'noreturn'Robert Yang
Fix the build error of autogen-native which depends on guile-native: ysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:40:24: error: expected ')' before '__attribute__' sysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:40:24: error: expected ',' or ';' before ')' token sysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:42:27: error: expected ')' before '__attribute__' [YOCTO #5743] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17opkg-utils: Remove strange PACKAGES native overrideRichard Purdie
This code makes no sense, native.bbclass clears PACKAGES anyway. Drop it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17opkg-utils: Add basic PACKAGECONFIG for python dependenciesRichard Purdie
In small configurations its useful not to have python dependencies. This patch adds code to disable those using PACKAGECONFIG. This allows us to fix poky-tiny after the recent move of update-alternatives to opkg-utils. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17tcl: fix the TCL_INCLUDE_SPECRobert Yang
We have moved the header files to ${includedir}/tcl${VERSION}, but we didn't fix the TCL_INCLUDE_SPEC which is still ${includedir}, it should also be ${includedir}/tcl${VERSION} Note: this commit modifiey alter-includedir.patch, so it doesn't look very clear, I only fixed one line in both configure and configure.in: -eval "TCL_INCLUDE_SPEC=\"-I${includedir}\"" +eval "TCL_INCLUDE_SPEC=\"-I${includedir}/tcl${VERSION}\"" The other changes are because I use git to create the patch while the previous one uses svn. [YOCTO #5732] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17opkg/opkg-utils/chkconfig: Clean up u-a-cworth referencesRichard Purdie
Catch some u-a-cworth references that slipped through the move of u-a to opkg-utils and its rename to -opkg. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16opkg: No longer PROVIDES update-alternativesPaul Barker
The new provider is the opkg-utils recipe. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16opkg-utils: Upgrade to latest git HEADPaul Barker
The latest version of opkg-utils PROVIDES virtual/update-alternatives via a script copied from opkg, packaged as update-alternatives-opkg. The nativesdk class is added to the recipe to ensure that nativesdk-update-alternatives-opkg is built. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14python-nose: don't install as an EggRoss Burton
Nose is installed as an Egg by default which we don't want, so change the inherit to setuptools from distutils to disable the eggification. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14python-nose: Add BBCLASSEXTEND for native/nativesdkRichard Purdie
Without this, nativesdk-python-numpy doesn't build. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14python-numpy: add (from meta-oe)Ross Burton
python-numpy is needed for Piglit. This recipe is taken directly from meta-oe. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14python-nose: add (from meta-oe)Ross Burton
python-nose is a build dependecy for python-numpy, needed for Piglit. This recipe is taken directly from meta-oe. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14python-mako: add (from meta-oe)Ross Burton
python-mako is needed for Piglit. This recipe is taken from meta-oe, and upgraded to the latest upstream version. Checksums updated as the upstream LICENSE file contains the copyright dates. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14make: Disable floating guile dependencyRichard Purdie
This makes builds of make deterministic. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-14cdrtools-native: upgrade to 3.01a20Paul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-14chrpath: upgrade to 0.15Paul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-10binutils: Also add autoconf-native to DEPENDSPhil Blundell
Commit 616354f13732d13c17434d5b60b166f691c25761 is insufficient because gnu-config-native's gnu-configize script uses perl modules from autoconf and hence doesn't work unless autoconf-native is staged (which it may not be if building from sstate). Ideally g-c-n would itself declare a dependency on autoconf-native but this is difficult to arrange without creating a dependency loop. autoconf-native already depends on gnu-config-native (because autoreconf invokes gnu-configize) and has a build dependency on m4-native, which in turn build-depends on g-c-n because it configizes itself by steam in do_configure and needs config.{guess,sub} to be available. Adding some sort of gnu-config-initial-native recipe would fix the latter problem, but this would be ugly because it would need special-casing in (at least) autotools.bbclass, and in any case this still wouldn't solve the problem of autoconf itself depending on g-c-n. So, the easiest solution to the problem at hand is to arrange for those few recipes that depend on g-c-n but not autoconf-native to gain that latter dependency as well. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-10qemu: Remove stray .git files after unpackingPhil Blundell
The qemu tarball ships some extraneous .git metadata in the dtc/ and pixman/ subfolders, containing a reference to the path "../.git/modules" which doesn't exist. The presence of these files will confuse git if it happens to recurse into the qemu source folder during an operation on some parent directory, for example "git clean" at a higher level. Avoid that problem (mostly) by removing them immediately after the sources are unpacked. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-08tcl: enable ptest supportChong Lu
Install tcl test suite and run it as ptest. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-08qemu: upgrade to 1.7.0Cristian Iorga
linux-user-Handle-SOCK_CLOEXEC-NONBLOCK-if-unavailab.patch file no longer needed, included in upstream. qemu-native tested on all architectures, host machine is Ubuntu Linux 13.10 x86-64. Basic X11 and networking tests performed. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06guile: fix the depends for target recipesJackie Huang
The depenency on guild-native and libatomics-ops is missing in multilib build, fix the depends with class-target. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-06python: explicitly disable bluetooth.h checkMartin Jansa
* bluetooth.h is autodetected from sysroot and influences 2 python files: /usr/include/python2.7/pyconfig-32.h /usr/lib/python2.7/lib-dynload/_socket.so * it doesn't link with bluez, so it wasn't detected by test-dependencies.sh, but still causes undeterministic builds and should be fixed * we can use PACKAGECONFIG, but I don't expect many people to use bt support in python-socket Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-06Add missing RDEPENDS of initscripts-functionsChen Qi
Now that the initscripts-functions has been packaged separately, packages which may use the functions script should have a runtime dependency on it. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-06quilt: enable ptest supportChong Lu
Install quilt test suite and run it as ptest. Exclude delete.test and mail.test. delete.test need execute with normal user and mail.test need depend on mail agent, else these test cases will fail. So exclude them order to make ptest all pass. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06kconfig-frontends: fix the incorrect depends on gperfJackie Huang
The gperf-native is actually needed to generate hash functions, change to depend on the native one. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06valgrind: rrecommend libc6-dbg on all architecturesMike Crowe
It seems that valgrind requires debug symbols to be available on all architectures so there's no reason to treat arm and powerpc specially. Ensuring that libc6-dbg is installed avoids errors like this on x86: valgrind: Fatal error at startup: a function redirection valgrind: which is mandatory for this platform-tool combination valgrind: cannot be set up. Details of the redirection are: valgrind: valgrind: A must-be-redirected function valgrind: whose name matches the pattern: strlen valgrind: in an object with soname matching: ld-linux.so.2 valgrind: was not found whilst processing valgrind: symbols from the object with soname: ld-linux.so.2 valgrind: valgrind: Possible fixes: (1, short term): install glibc's debuginfo valgrind: package on this machine. (2, longer term): ask the packagers valgrind: for your Linux distribution to please in future ship a non- valgrind: stripped ld.so (or whatever the dynamic linker .so is called) valgrind: that exports the above-named function using the standard valgrind: calling conventions for this platform. The package you need valgrind: to install for fix (1) is called valgrind: valgrind: On Debian, Ubuntu: libc6-dbg valgrind: On SuSE, openSuSE, Fedora, RHEL: glibc-debuginfo valgrind: valgrind: Cannot continue -- exiting now. Sorry. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06cdrtools-native: remove unused FILESPATHPetter Mabäcker
Usage of FILESPATH is discouraged, since it can make recipes harder to bbappend. Instead FILESEXTRAPATHS should be used to extend the path. However in cdrtools no FILESPATH additions are currently needed so instead it should be removed. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06make: upgrade to 4.0Robert Yang
Upgrade to 4.0, remove the following patches since they have been fixed by the upgrade: - expand_MAKEFLAGS.patch - intermediate-target-bugfix.patch - make-savannah-bug30612-fix_white_space.patch - make-savannah-bug30612-handling_of_archives.patch Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06autogen-native: upgrade to 5.18.2Robert Yang
* Upgrade from 5.17.4 to 5.18.2 * Rename files -> autogen Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06autoconf: remove path_prog_fixes.patchRobert Yang
The path_prog_fixes.patch was used for fixing the perl path, but the do_install_append() can do it, so remove this patch. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06automake: upgrade to 1.14Robert Yang
Upgrade from 1.13.4 to 1.14: - Remove the PATHFIXPATCH variable and path_prog_fixes.patch since the problem can be fixed by the do_install_append(). - Remove prefer-cpio-over-pax-for-ustar-archives.patch since it have been fixed by the upgrade. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-06e2fsprogs: upgrade to 1.42.9Robert Yang
* Upgrade to 1.42.9 * Remove the following patches since they have been merged/fixed by upstream: - debugfs-extent-header.patch - debugfs-sparse-copy.patch - debugfs-too-short.patch - e2fsprogs-fix-tests-f_extent_oobounds.patch - fallocate.patch * The populate-extfs.sh had been merged by the upstream, but I'd like to go on using the previous one which is from our meta layer, they are a little different, and the script would be dropped when we use the mke2fs to populate the rootfs. * Sumitted the patch for populate-extfs.sh (from Søren Holm) to upstream. * Submitted fix-icache.patch to upstream, I wrongly thought it was not applicable to the upstream, but it does. * Join the do_install() and do_install_append() together. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-02Tweak SUMMARYPaul Eggleton
For these recipes, I took the opportunity to fix up the new SUMMARY values as the originals needed tweaking. I've tried to make them concisely explain the function of the recipe / package where possible. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-01-02Update after toplevel LICENSE file checksum changeRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-02e2fsprogs: silence debugfsRoss Burton
debugfs echos the commands when it is executing a script, but as the scripts used at rootfs time are long this massively inflates the do_rootfs log. Comment out the echo so that the rootfs isn't 20K lines longer than it needs to be. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-02git: upgrade to 1.8.5.2Robert Yang
* Upgrade to 1.8.5.2 * Remove the SRC_URI from the git.inc since we use the one in git_1.8.5.2.bb Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-02make: remove the obsolete SCCS.patchRobert Yang
This patch is used for removing SCCS/*s.conftest, but there is no SCCS directory from 3.81, so remove it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-02quilt: upgrade to 0.61Chong Lu
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-30 12:37:11 +0000