aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/runqemu
AgeCommit message (Collapse)Author
2017-02-28runqemu: support UEFI with OVMF firmwarePatrick Ohly
In the simplest case, "runqemu qemux86 <some-image> qcow2 ovmf" for an EFI-enabled image in the qcow2 format will locate the ovmf.qcow2 firmware file deployed by the ovmf recipe in the image deploy directory, override the graphics hardware with "-vga std" because that is all that OVMF supports, and boot with UEFI enabled. ovmf is not built by default. Either do it explicitly ("bitbake ovmf") or make it a part of the normal build ("MACHINE_ESSENTIAL_EXTRA_RDEPENDS_append = ' ovmf'"). The firmware file is activated as a flash drive instead of using the qemu BIOS parameters, because that is the recommended method (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=764918#47) as it allows storing UEFI variables in the file. Instead of just "ovmf", a full path to an existing file can also be used, just as with the rootfs. That may be useful when making a permanent copy of the virtual machine data files. It is possible to specify "ovmf*" parameters more than once, then each parameter creates a separate flash drive. This way it is possible to use separate flash drives for firmware code and variables: $ runqemu qemux86 <some-image> qcow2 ovmf.code ovmf.vars" Note that rebuilding ovmf will overwrite the ovmf.vars.qcow2 file in the image deploy directory. So when the goal is to update the firmware while keeping variables, make a copy of the variable file and use that: $ mkdir my-machine $ cp tmp/deploy/images/qemux86/ovmf.vars.qcow2 my-machine/ $ runqemu qemux86 <some-image> qcow2 ovmf.code my-machine/ovmf.vars.qcow2 When Secure Boot was enabled in ovmf, one can pick that instead of the non-Secure-Boot enabled ovmf.code: $ runqemu qemux86 <some-image> qcow2 ovmf.secboot.code my-machine/ovmf.vars.qcow2 Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
2017-02-28runqemu: also accept -image suffix for rootfs parameterPatrick Ohly
The magic detection of the rootfs parameter only worked for image recipes which embedd the "image" string in the middle, as in "core-image-minimal". Sometimes it is more natural to call an image "something-image". To get such an image detected by runqemu, "-image" at the end of a parameter must also cause that parameter to be treated as the rootfs parameter. Inside the image directory, "something-image" has an -<arch> suffix and thus no change is needed for those usages of re.search('-image-'). However, while at it also enhance those string searches a bit (no need for re; any()+map() a bit closer to the intended logic). Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
2017-02-28runqemu: fix undefined variable reference in check_arg_path()Patrick Ohly
'arg' isn't defined, the right name there is 'p'. This fixes a rather obscure error message when that code path ends up being taken: $ runqemu some/existing-file-name runqemu - ERROR - name 'arg' is not defined runqemu - ERROR - Try 'runqemu help' on how to use it Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
2017-02-02scripts/runqemu: fix a typoMing Liu
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-31runqemu: allow bypassing of network setupJuro Bystricky
At present it is silently assumed all QEMU machines support networking. As a consequence, one cannot run QEMUs without network emulation using "runqemu". This patch allows bypassing any network setup providing the qemuboot.conf file contains: qb_net = none [YOCTO#10661] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-26runqemu: more verbose error message about missing qemuboot.confPatrick Ohly
When invoking "runqemu" with a mistyped image or architecture name, the resulting error message is about the missing qemuboot.conf, without any indication about the root cause: $ runqemu core-image-mimimal ext4 intel-corei7-64 runqemu - INFO - Assuming MACHINE = intel-corei7-64 runqemu - INFO - Running MACHINE=intel-corei7-64 bitbake -e... runqemu - INFO - MACHINE: intel-corei7-64 runqemu - INFO - DEPLOY_DIR_IMAGE: /fast/build/refkit/intel-corei7-64/tmp-glibc/deploy/images/intel-corei7-64 Traceback (most recent call last): File "/work/openembedded-core/scripts/runqemu", line 1095, in <module> ret = main() File "/work/openembedded-core/scripts/runqemu", line 1082, in main config.read_qemuboot() File "/work/openembedded-core/scripts/runqemu", line 643, in read_qemuboot raise Exception("Failed to find <image>.qemuboot.conf!") Exception: Failed to find <image>.qemuboot.conf! Including the name of the actual file the scripts expects to find plus adding some hints what to check for might help. The error now is: $ runqemu core-image-mimimal ext4 intel-corei7-64 ... Exception: Failed to find <image>.qemuboot.conf = .../tmp-glibc/deploy/images/intel-corei7-64/core-image-mimimal-intel-corei7-64.qemuboot.conf (wrong image name or BSP does not support running under qemu?). The comment about the BSP is included because that would be the real reason why the file might be missing. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-23runqemu: fixes for slirp, network device and hostfwdRobert Yang
Fixed: - Add QB_NETWORK_DEVICE to set network device, it will be used by both slirp and tap. - Set QB_NETWORK_DEVICE to "-device virtio-net-pci" in qemuboot.bbclass but runqemu will default to "-device e1000" when QB_NETWORK_DEVICE is not set, this is because oe-core's qemu targets support virtio-net-pci, but the one outside of oe-core may not, "-device e1000" is more common. - Set hostfwd by default: 2222 -> 22, 2323 -> 23, and it will choose a usable port when the one like 222 is being used. This can avoid conflicts when multilib slirp qemus are running. We can forward more ports by default if needed, and bsp.conf can custom it. - Use different mac sections for slirp and tap to fix conflicts when running both of them on the same host. [YOCTO #7887] CC: Nathan Rossi <nathan@nathanrossi.com> CC: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-01-23runqemu: support multiple qemus running when nfsRobert Yang
Fixed: * In build1: $ runqemu nfs qemux86-64 In build2: $ runqemu nfs qemux86-64 It would fail before since the port numerbs and conf files are conflicted, now make runqemu-export-rootfs work together with runqemu to fix the problem. * And we don't need export PSEUDO_LOCALSTATEDIR in runqemu, the runqemu-export-rootfs can handle it well based on NFS_EXPORT_DIR. * Remove "async" option from unfsd to fix warning in syslog: Warning: unknown exports option `async' ignored * Fixed typos Both slirp and tap can work. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-01-19scripts/runqemu: fix checking for <file>.cpio.gzRobert Yang
When "runqemu /path/to/<file>.cpio.gz", it used the last suffix "gz" as the fstype which was wrong. Check filename against self.fstypes firstly can fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16runqemu: Allow the user to specity no kernel or rootFSAlistair Francis
In some cirsumstances the user doesn't want to supply a kernel, rootFS or DTB to QEMU. This will occur more now that QEMU supports loading images using a '-device loader' method. Allow users to specify 'none' for QB_DEFAULT_FSTYPE or QB_DEFAULT_KERNEL to avoid supplying these options to QEMU. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-05runqemu: let command line parameters override defaultsPatrick Ohly
It may be necessary to override the parameters gathered for the qemu invocation. For example, the qemux86 machine configuration sets "-vga vmware", but when using OVMF as BIOS, only "-vga std" is supported. By putting the parameters derived from custom runqemu parameters like "qemuparams" after the parameters derived from the machine configuration the user gets the possibility to override those. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16scripts/runqemu: Allow to use qemu from host.Mariano Lopez
This will add support to use qemu from the running host, with this is possible to put qemu-native in ASSUME_PROVIDED variable. By default it will try to get qemu from the build sysroot, and only if it fails will try to use the host's qemu. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15runqemu: Split out the base name of QB_DEFAULT_KERNELAlistair Francis
The function write_qemuboot_conf() in qemuboot.bbclass always inserts the full path into QB_DEFAULT_KERNEL. Remove this path before using the variable. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06runqemu: add user mode (SLIRP) support to x86 QEMU targetsTodor Minchev
Using 'slirp' as a command line option to runqemu will start QEMU with user mode networking instead of creating tun/tap devices. SLIRP does not require root access. By default port 2222 on the host will be mapped to port 22 in the guest. The default port mapping can be overwritten with the QB_SLIRP_OPT variable e.g. QB_SLIRP_OPT = "-net nic,model=e1000 -net user,hostfwd=tcp::2222-:22" Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30runqemu: Add little endian variations for MIPSZubair Lutfullah Kakakhel
Add mipsel and mips64el as an option. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-28runqemu: explicitly set image formatEd Bartosh
QEMU produces a warning if drive format is not specified: WARNING: Image format was not specified for 'tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.wic' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. Set image format to 'vmdk', 'qcow2' or 'vdi' for correspondent image types. Set it to 'raw' for the rest of image types. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23scripts/runqemu: provide better error message on runqemu ifup failStephano Cetola
If runqemu-ifup fails hen running testimage, a rather cryptic error regarding "no tty present" is displayed. If this step fails, we should at least point the user at runqemu-gen-tapdevs. A quick search of this term in the manual will lead them to "Enabling Runtime Tests on QEMU" which should give them all the info they need. Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23scripts/runqemu: Using a cpio* rootfs has no special networkNathan Rossi
When booting a system with the rootfs being of cpio* type the networking setup should still work the same as for all other root filesystem types. This change removes the clearing of the NETWORK_CMD variable allowing for the slirp/tap setup to be provided to QEMU. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-23runqemu: Move virtio RNG to machine configurationNathan Rossi
Not all QEMU machines (outside of those available in OE-Core) are capable of using the virtio-rng-pci device due to various machine models not having a pci/virtio bus. This makes it such that the use of the '-device virtio-rng-pci' flag to QEMU is machine specific. This patch removes the general addition of the flag to all runqemu targets and adds the flag into the QB_OPT_APPEND for all the qemu* machines in OE-Core that support its use (which is all of them). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-21runqemu: don't fail during check_arg_machine()Joshua Lock
If DEPLOY_DIR_IMAGE doesn't exist during check_arg_machine() we will attempt to guess a suitable value later when check_and_set() calls validate_paths(), therefore this shouldn't raise an exception Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-21runqemu: don't try and invoke bitbake when running in a toolchain envJoshua Lock
If a MACHINE value is passed we can't validate it by running bitbake as the toolchain environment doesn't include the build system, we must assume that the passed value for MACHINE is correct. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-21runqemu: try and guess qemu-system binary when MACHINE isn't setJoshua Lock
Emulate some logic from the prior, shell based, version of runqemu to try and infer the correct setting for MACHINE from the kernel and rootfs filenames. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-21runqemu: validate paths and attempt to infer unset pathsJoshua Lock
We need to validate and ensure all paths are set regardless of whether runqemu was invoked with a .qemuboot.conf file or otherwise. Split this logic out into a separate method called during check_and_set() Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-20runqemu: improve finding of rootfs, kernel and dtbRobert Yang
* Search rootfs in the following order: - IMAGE_NAME*.FSTYPE - IMAGE_LINK_NAME*.FSTYPE * Search kernel in the following order: - QB_DEFAULT_KERNEL - KERNEL_IMAGETYPE - KERNEL_IMAGETYPE* * Search dtb in the following order: - QB_DTB - QB_DTB* - *.dtb * Fix DTB, it should only work with "-kernel" option. [YOCTO #10265] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-19runqemu: use OECORE_NATIVE_SYSROOT from sdkRobert Yang
There is no STAGING_DIR_NATIVE or bitbake in a extracted sdk, so check OECORE_NATIVE_SYSROOT and use it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-19runqemu: work even if a *.qemuboot.conf isn't foundJoshua Lock
A qemuboot conf file is a convenience but it should still be possible to invoke runqemu without them, especially for examples such as using the SDK with an extracted rootfs via NFS. As read_qemuboot() is always called we need to be sure that function can return cleanly, without throwing Exceptions, even if a qemuboot conf file isn't found. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-19runqemu: try symlinks when kernel or rootfs can't be foundJoshua Lock
If the kernel or rootfs names written to the qemuboot.conf can't be found, try and find the symlinked variant of the filename. This will help usability of runqemu, for example where a user downloads an image and associated files as the symlinked names yet the qemuboot.conf variables point to the full, non-linked, file names. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-19runqemu: clarify an INFO messageJoshua Lock
Make it clearer that we are looking for a file which ends with qemuboot.conf Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-19runqemu: add guidance to resolve issues with missing filesJoshua Lock
When a required binary cannot be found print some guidance pointing to using a sourced OE build environment or a qemuboot.conf file, based on a similar message from the previous shell-based runqemu. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-19runqemu: acquire_lock() should fail when failed to open the fileRobert Yang
The open(self.lock, 'w') may fail when the lock is created by other users, return false for this case to let it try other devices. Fixed: runqemu - INFO - Running /sbin/ip link... runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock... Traceback (most recent call last): File "/buildarea/lyang1/poky/scripts/runqemu", line 972, in <module> ret = main() File "/buildarea/lyang1/poky/scripts/runqemu", line 963, in main config.setup_network() File "/buildarea/lyang1/poky/scripts/runqemu", line 810, in setup_network self.setup_tap() File "/buildarea/lyang1/poky/scripts/runqemu", line 761, in setup_tap if self.acquire_lock(): File "/buildarea/lyang1/poky/scripts/runqemu", line 182, in acquire_lock lock_descriptor = open(self.lock, 'w') PermissionError: [Errno 13] Permission denied: '/tmp/qemu-tap-locks/tap0.lock' Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-14runqemu: fix a race issue on lockdirRobert Yang
There might be a race issue when multi runqemu processess are running at the same time: | Traceback (most recent call last): | File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 920, in <module> | ret = main() | File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 911, in main | config.setup_network() | File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 760, in setup_network | self.setup_tap() | File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 697, in setup_tap | os.mkdir(lockdir) | FileExistsError: [Errno 17] File exists: '/tmp/qemu-tap-locks' Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09scripts/runqemu: Add snapshot supportRichard Purdie
Allow access to the snapshot option of qemu to simplify some of our runtime testing to avoid copying images. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: Enable virtio RNG for all platformsRichard Purdie
We have problems where systems simply stop booting and hang. This is due to a lack of entropy which means ssh keys and networking can't be brought up. Adding in the virtio-rng passthrough support allows host entropy to pass into the guess and avoids these hangs. This is particularly problematic after the gnutls upgrade which starts using /dev/random instead of /dev/urandom but was an issue we'd occasionally seem before that. It particualrly affected x86 and ppc machines for some reason. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: Update to modern prefrerred net syntaxRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: Allow unique network interface MAC addressesRichard Purdie
Current qemu instances all share the same MAC address. This shouldn't be an issue as they are all on separate network interfaces, however on the slight chance this is causing problems, its easy enough to ensure we use unique MAC addresses based on the IP numbers we assign. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: fix run from testimage with non-standard DEPLOY_DIR_IMAGEJoshua Lock
testimage.bbclass uses runqemu to execute runtime tests on a qemu target, this means that bitbake is already running and `bitbake -e` can't be called to obtain bitbake variables. runqemu tries to work around being unable to read values for bitbake variables by inferring the MACHINE from the DEPLOY_DIR_IMAGE setting, however if a user sets that variable in a manner which doesn't follow the systems expectations (i.e. if running `bitbake -c testimage` against a directory of pre-generated images in a user-specified path) the inferring of the MACHINE name from the DEPLOY_DIR_IMAGE location will fail. It's possible that check_arg_machine() shouldn't cause runqemu to fail and that runqemu should proceed with the user-supplied value even if it can't be verified. This patch simply ensures that a workflow where the user sets DEPLOY_DIR_IMAGE continues to work without changing too much of the runqemu code. [YOCTO #10238] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: fixes for when invoked during a bitbake runJoshua Lock
When runqemu is invoked from a running bitbake instance it will be unable to call `bitbake -e` due to the lock held by the calling bitbake instance. Our test code sets an OE_TMPDIR environment variable from which we can infer/guess paths. Add code to do so when self.bitbake_e can't be set, much as the sh version of runqemu did. [YOCTO #10240] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: better handle running on a host with different pathsJoshua Lock
If the STAGING_*_NATIVE directories from the config file don't exist and we're in a sourced OE build directory try to extract the paths from `bitbake -e` Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: assume artefacts are relative to *.qemuboot.confJoshua Lock
When runqemu is started with a *.qemuboot.conf arg assume that image artefacts are relative to that file, rather than in whatever directory the DEPLOY_DIR_IMAGE variable in the conf file points to. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: refactor it and remove machine knowledgeRobert Yang
Previously, runqemu had hard coded machine knowledge, which limited its usage, for example, qemu can boot genericx86, but runqemu can't, we need edit runqemu/runqemu-internal a lot if we want to boot genericx86. Now bsp conf files can set vars to make it can be boot by runqemu, and qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.conf. Please see qemuboot.bbclass' comments on how to set the vars. * Re-write it in python3, which can reduce lines from 1239 to about 750 lines * All the machine knowledges are gone * All of the TUN_ARCH knowledge are gone * All the previous options are preserved, and there is a new way to run runqemu: (it doesn't need run "bitake -e" in such a case) $ runqemu tmp/deploy/images/qemux86 or: $ runqemu tmp/deploy/images/qemuarm/<image>.ext4 or: $ runqemu tmp/deploy/images/qemuarm/qemuboot.conf * Fixed audio support, not limited on x86 or x86_64 * Fix SLIRP mode, add help message, avoid mixing with tap * Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after stop. * More bsps can be boot, such as genericx86 and genericx86-64. * The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to meta-xilinx' mailing list. * I can't find any qemush4 bsp or how to build it, so it is not considered atm. [YOCTO #1018] [YOCTO #4827] [YOCTO #7459] [YOCTO #7887] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-10runqemu: qemuzynqmp: Add Linux boot supportAlistair Francis
Add support to direct boot Linux instead of just booting u-boot. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-12runqemu: Add suport for qemuzynqmpAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-14runqemu: let ramfs equal to cpio.gzRobert Yang
For example, support both: $ runqemu qemux86-64 ramfs $ runqemu qemux86-64 cpio.gz (new) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-29runqemu: fix for isoRobert Yang
It should be the similar type as hddimg, rather than ext234 or btrfs. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-23runqemu-internal: cleanup unsed codeRobert Yang
* remove akita and spitz related code They are not supported by runqemu anymore: $ runqemu spitz Error: unable to classify arg [spitz] So remove related code. * Remove checking of 256M for qemuarm, qemu can check it, for example: $ runqemu qemuarm qemuparams="-m 1024" [snip] qemu: Too much memory for this machine: 1024 MB, maximum 256 MB [snip] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-03-23runqemu: simplify checking for iso and ramfsRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-03-23runqemu: add support for qcow2 and vdiRobert Yang
[YOCTO #9168] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-03-23runqemu: remove ISO and RAMFS from help textRobert Yang
They don't work, and the script can check the type correctly. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-03-23runqemu: simplify the checking for vm imagesRobert Yang
* So that we can add more image support easliy. * I think that wic should be vm images. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-03-23runqemu: fix ROOTFS for vmdkRobert Yang
* Make it can boot scsi and virtio block drive such as root=/dev/sdX and /dev/vdX. * Drop VM from help info, id doesn't work, and the script can check whether it is a vm disk or not. * Make it can be run by: $ runqemu tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.vmdk or: $ runqemu qemux86-64 vmdk [YOCTO #9170] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 06:13:00 +0000