remove install-native package

Sane 'install' program is provided by coreutils-native now.

Acked-by: Otavio Salvador <otavio@ossystems.com.br>

12 files changed, 4 insertions, 372 deletions

diff --git a/conf/distro/include/preferred-om-2008-versions.inc b/conf/distro/include/preferred-om-2008-versions.inc
index e3e21872b7..8c5c4f7cb0 100644
--- a/conf/distro/include/preferred-om-2008-versions.inc
+++ b/conf/distro/include/preferred-om-2008-versions.inc
@@ -712,7 +712,6 @@ PREFERRED_VERSION_inkscape ?= "0.43"
 PREFERRED_VERSION_inkwp ?= "0.1.1"
 PREFERRED_VERSION_inotify-tools ?= "2.1"
 PREFERRED_VERSION_inputproto ?= "1.4.4"
-PREFERRED_VERSION_install-native ?= "0.1"
 PREFERRED_VERSION_insttrain ?= "1.0.5"
 PREFERRED_VERSION_interbench ?= "0.30"
 PREFERRED_VERSION_intercom ?= "0.15"
diff --git a/recipes/beep/beep_1.2.2.bb b/recipes/beep/beep_1.2.2.bb
index 759f74f8a0..e3ffdce22a 100644
--- a/recipes/beep/beep_1.2.2.bb
+++ b/recipes/beep/beep_1.2.2.bb
@@ -4,7 +4,6 @@ DESCRIPTION = "A console utility to make a beep noise"
 SECTION = "console/utils"
 LICENSE = "GPL"
 PR = "r2"
-DEPENDS = "install-native"
 
 SRC_URI  = "http://johnath.com/beep/beep-${PV}.tar.gz"
 SRC_URI += "file://linux-input.patch;patch=1"
diff --git a/recipes/callweaver/callweaver-perl.bb b/recipes/callweaver/callweaver-perl.bb
index 99e2fb73bf..7ff077b8cd 100644
--- a/recipes/callweaver/callweaver-perl.bb
+++ b/recipes/callweaver/callweaver-perl.bb
@@ -2,7 +2,6 @@ DESCRIPTION = "Callweaver::OGI Perl Gateway Interface Module"
 HOMEPAGE = "http://www.callweaver.org"
 SECTION = "libs"
 LICENSE = "GPL"
-DEPENDS = "install-native"
 RDEPENDS = "perl callweaver-ogi"
 PR = "r0"
 S = "${WORKDIR}/callweaver-1.2-${CWRCV}/contrib/ogi-perl/callweaver-perl-0.0.1"
diff --git a/recipes/cron/cron_3.0pl1.bb b/recipes/cron/cron_3.0pl1.bb
index f7c2ccc6ba..ff1d380406 100644
--- a/recipes/cron/cron_3.0pl1.bb
+++ b/recipes/cron/cron_3.0pl1.bb
@@ -2,7 +2,6 @@ SECTION = "base"
 DESCRIPTION = "Vixie cron."
 LICENSE = "cron"
 PR ="r8"
-DEPENDS += "install-native"
 
 SRC_URI = "http://ibiblio.org/pub/Linux/system/daemons/cron/cron${PV}.tar.gz \
 	   file://nonrootinstall.patch;patch=1 \
diff --git a/recipes/cups/cups.inc b/recipes/cups/cups.inc
index 59075fb042..8e2a7a8075 100644
--- a/recipes/cups/cups.inc
+++ b/recipes/cups/cups.inc
@@ -1,7 +1,7 @@
 DESCRIPTION = "An Internet printing system for Unix."
 SECTION = "console/utils"
 LICENSE = "GPL LGPL"
-DEPENDS = "gnutls jpeg dbus dbus-glib libpng zlib install-native fakeroot-native"
+DEPENDS = "gnutls jpeg dbus dbus-glib libpng zlib fakeroot-native"
 
 SRC_URI = "ftp://ftp.easysw.com/pub/cups/${PV}/cups-${PV}-source.tar.bz2 \
 	  "
diff --git a/recipes/cups/cups_1.1.23.bb b/recipes/cups/cups_1.1.23.bb
index b17d899a3d..d6f0de8d7b 100644
--- a/recipes/cups/cups_1.1.23.bb
+++ b/recipes/cups/cups_1.1.23.bb
@@ -1,7 +1,7 @@
 DESCRIPTION = "An Internet printing system for Unix."
 SECTION = "console/utils"
 LICENSE = "GPL LGPL"
-DEPENDS = "openssl jpeg libpng zlib install-native fakeroot-native"
+DEPENDS = "openssl jpeg libpng zlib fakeroot-native"
 PR = "r6"
 
 SRC_URI = "ftp://ftp3.easysw.com/pub/cups/${PV}/cups-${PV}-source.tar.bz2 \
diff --git a/recipes/cups/cups_1.2.7.bb b/recipes/cups/cups_1.2.7.bb
index 24249fa3b1..8559bfcf8e 100644
--- a/recipes/cups/cups_1.2.7.bb
+++ b/recipes/cups/cups_1.2.7.bb
@@ -1,7 +1,7 @@
 DESCRIPTION = "An Internet printing system for Unix."
 SECTION = "console/utils"
 LICENSE = "GPL LGPL"
-DEPENDS = "gnutls jpeg dbus dbus-glib libpng zlib install-native fakeroot-native"
+DEPENDS = "gnutls jpeg dbus dbus-glib libpng zlib fakeroot-native"
 PR = "r1"
 
 SRC_URI = "ftp://ftp3.easysw.com/pub/cups/${PV}/cups-${PV}-source.tar.bz2 \
diff --git a/recipes/cyrus-imapd/cyrus-imapd_2.2.12.bb b/recipes/cyrus-imapd/cyrus-imapd_2.2.12.bb
index e80340f080..2247ea9bc1 100644
--- a/recipes/cyrus-imapd/cyrus-imapd_2.2.12.bb
+++ b/recipes/cyrus-imapd/cyrus-imapd_2.2.12.bb
@@ -2,7 +2,6 @@ SECTION = "console/network"
 DEPENDS = "cyrus-sasl virtual/db"
 LICENSE = "BSD"
 PR = "r12"
-DEPENDS += "install-native"
 
 SRC_URI = "ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/cyrus-imapd-${PV}.tar.gz \
            file://autotools.patch;patch=1 \
diff --git a/recipes/gnome/libart-lgpl.inc b/recipes/gnome/libart-lgpl.inc
index 710656b9e3..461315649b 100644
--- a/recipes/gnome/libart-lgpl.inc
+++ b/recipes/gnome/libart-lgpl.inc
@@ -11,8 +11,6 @@ SRC_URI = "http://ftp.gnome.org/pub/GNOME/sources/libart_lgpl/2.3/libart_lgpl-${
 
 inherit autotools pkgconfig
 
-DEPENDS = "install-native"
-
 FILES_${PN} = "${libdir}/*.so.*"
 FILES_${PN}-dev += "${bindir}/libart2-config"
 
diff --git a/recipes/install/files/install-sh b/recipes/install/files/install-sh
deleted file mode 100644
index 8de386e4c7..0000000000
--- a/recipes/install/files/install-sh
+++ /dev/null
@@ -1,334 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2004-10-22.00
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-preserve_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--D         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--p         apply access/modification times of SRCFILE files
-           to corresponding DSTFILE files
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -D) shift
-    	continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit 0;;
-
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -p) preserve_arg="-p"
-    	shift
-	continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit 0;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
-	break;;
-  esac
-done
-
-if test -z "$1"; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
-  else
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dst=$dst/`basename "$src"`
-    fi
-  fi
-
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
-  # Make sure that the destination directory exists.
-
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
-
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
-
-    pathcomp=
-
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
-      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
-      fi
-      pathcomp=$pathcomp/
-    done
-  fi
-
-  if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
-  else
-    dstfile=`basename "$dst"`
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
-
-    # Copy the file name to the temp name.
-    $doit $cpprog $preserve_arg "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/recipes/install/install-native_0.1.bb b/recipes/install/install-native_0.1.bb
deleted file mode 100644
index 70c027bfe1..0000000000
--- a/recipes/install/install-native_0.1.bb
+++ /dev/null
@@ -1,27 +0,0 @@
-# This package uses the GNU autotools install-sh script to implement
-# a target-capable 'install' command.
-DESCRIPTION = "Target install command"
-SECTION = "devel"
-PRIORITY = "optional"
-LICENSE = "MIT"
-INHIBIT_DEFAULT_DEPS = "1"
-PR = "r1"
-
-SRC_URI = "file://install-sh"
-
-inherit native
-
-PACKAGES = ""
-S = "${WORKDIR}"
-
-do_stage() {
-	# When the install command is executed 'STRIP' is defined correctly in
-	# the environment
-	rm -f ${STAGING_BINDIR}/install-sh
-	cp install-sh ${STAGING_BINDIR}/install-sh
-	chmod 755 ${STAGING_BINDIR}/install-sh
-	rm -f ${STAGING_BINDIR}/install
-	echo '#!/bin/sh' >${STAGING_BINDIR}/install
-	echo 'STRIPPROG="$STRIP" exec sh "${STAGING_BINDIR}/install-sh" "$@"' >>${STAGING_BINDIR}/install
-	chmod 755 ${STAGING_BINDIR}/install
-}
diff --git a/recipes/netpbm/netpbm_10.28.bb b/recipes/netpbm/netpbm_10.28.bb
index ff90310e1b..cceac41541 100644
--- a/recipes/netpbm/netpbm_10.28.bb
+++ b/recipes/netpbm/netpbm_10.28.bb
@@ -9,7 +9,7 @@ LICENSE = "GPL MIT Artistic"
 # licenses.  The compiled and linked command line utilties are
 # subject to the licenses of the libraries they use too - including
 # libpng libz, IJG, and libtiff licenses
-DEPENDS = "jpeg zlib libpng tiff install-native flex-native"
+DEPENDS = "jpeg zlib libpng tiff flex-native"
 RDEPENDS = "perl\
 	perl-module-cwd\
 	perl-module-english\