backport dm500hd support

18 files changed, 2275 insertions, 9 deletions

diff --git a/conf/machine/dm500hd.conf b/conf/machine/dm500hd.conf
new file mode 100644
index 0000000000..15b8d16068
--- /dev/null
+++ b/conf/machine/dm500hd.conf
@@ -0,0 +1,55 @@
+#@TYPE: Machine
+#@NAME: Dreambox DM500HD
+#@DESCRIPTION: Machine configuration for the Dreambox DM500HD
+
+TARGET_ARCH = "mipsel"
+IPKG_ARCHS = "all mipsel ${MACHINE}"
+PREFERRED_PROVIDER_avahi = "avahi"
+PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+PREFERRED_PROVIDER_virtual/kernel = "linux-dm8000"
+BOOTSTRAP_EXTRA_DEPENDS = "virtual/kernel dreambox-dvb-modules"
+BOOTSTRAP_EXTRA_RDEPENDS = "kernel dreambox-dvb-modules \
+	kernel-module-exportfs \
+	kernel-module-reiserfs \
+	kernel-module-sd-mod \
+	kernel-module-sg \
+	kernel-module-sr-mod \
+	kernel-module-usbhid \
+	kernel-module-usbmon \
+	kernel-module-xfs"
+
+
+
+TARGET_FPU = "soft"
+#OLDEST_KERNEL = "2.6.9"
+
+PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
+PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
+PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
+PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
+
+PREFERRED_VERSION_glibc = "2.3.5+cvs20051107"
+PREFERRED_VERSION_gcc-cross-initial = "3.4.5"
+PREFERRED_VERSION_gcc-cross = "4.1.1"
+PREFERRED_VERSION_gcc-cross-sdk = "4.1.1" 
+PREFERRED_VERSION_gcc = "4.1.1"
+PREFERRED_VERSION_binutils-cross = "2.16.1"
+PREFERRED_VERSION_binutils-cross-sdk = "2.16.1"
+PREFERRED_VERSION_binutils = "2.16.1"
+PREFERRED_VERSION_linux-libc-headers = "2.6.12.0"
+GLIBC_ADDONS = "nptl"
+GLIBC_EXTRA_OECONF = "--disable-profile --with-tls --without-fp --with-__thread"
+
+EXTRA_IMAGEDEPENDS += "dreambox-secondstage dreambox-buildimage-native"
+EXTRA_IMAGECMD_jffs2 = " --eraseblock=0x4000 -n -l "
+IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS}/boot --faketime \
+       --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.boot.jffs2 \
+       ${EXTRA_IMAGECMD}; rm -rf ${IMAGE_ROOTFS}/boot/*; \
+				mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \
+       --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
+       ${EXTRA_IMAGECMD}; \
+       buildimage ${STAGING_LIBDIR}/dreambox-secondstage/main.bin.gz \
+       ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.boot.jffs2 \
+       ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
+       ${MACHINE} 64 \
+       > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.nfi"
diff --git a/packages/base-files/base-files/dm500hd/fstab b/packages/base-files/base-files/dm500hd/fstab
new file mode 100644
index 0000000000..b362fab2c6
--- /dev/null
+++ b/packages/base-files/base-files/dm500hd/fstab
@@ -0,0 +1,8 @@
+rootfs               /                    auto       defaults              1 1
+proc                 /proc                proc       defaults              0 0
+devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
+usbdevfs             /proc/bus/usb        usbfs      defaults              0 0
+/dev/mtdblock/2      /boot                jffs2      ro                    0 0
+tmpfs                /var                 tmpfs      defaults              0 0
+tmpfs                /tmp                 tmpfs      defaults              0 0
+/dev/discs/disc0/part1 /media/hdd         auto       defaults              0 0
diff --git a/packages/dreambox/dreambox-bootlogo.bb b/packages/dreambox/dreambox-bootlogo.bb
index 90a7f2752b..c8cc8f6c47 100644
--- a/packages/dreambox/dreambox-bootlogo.bb
+++ b/packages/dreambox/dreambox-bootlogo.bb
@@ -23,10 +23,14 @@ SRC_URI_append_dm8000 = " http://sources.dreamboxupdate.com/download/7020/bootlo
 SRC_URI_append_dm800 = " http://sources.dreamboxupdate.com/download/7020/bootlogo-${MACHINE}-${IMAGES_VERSION}.jpg \
 	http://sources.dreamboxupdate.com/download/7020/switchoff-${MACHINE}-${IMAGES_VERSION}.mvi"
 
+SRC_URI_append_dm500hd = " http://sources.dreamboxupdate.com/download/7020/bootlogo-${MACHINE}-${IMAGES_VERSION}.jpg \
+	http://sources.dreamboxupdate.com/download/7020/switchoff-${MACHINE}-${IMAGES_VERSION}.mvi"
+
 S = "${WORKDIR}/"
 
 MVI = "bootlogo backdrop bootlogo_wait"
 MVI_append_dm800 = " switchoff"
+MVI_append_dm500hd = " switchoff"
 
 do_install() {
 	install -d ${D}/boot
@@ -51,6 +55,10 @@ do_install_dm8000() {
 	do_install_dm800
 }
 
+do_install_dm500hd() {
+	do_install_dm800
+}
+
 pkg_preinst() {
 	[ -d /proc/stb ] && mount -o rw,remount /boot
 }
diff --git a/packages/dreambox/dreambox-dvb-modules.bb b/packages/dreambox/dreambox-dvb-modules.bb
index 8e7664d0e9..8f66348ae5 100644
--- a/packages/dreambox/dreambox-dvb-modules.bb
+++ b/packages/dreambox/dreambox-dvb-modules.bb
@@ -26,6 +26,9 @@ PV_dm500plus = "${KV}-20080822"
 KV_dm800 = "2.6.12-5.1-brcmstb-dm800"
 PV_dm800 = "${KV}-20090707"
 
+KV_dm500hd = "2.6.12-5.1-brcmstb-dm500hd"
+PV_dm500hd = "${KV}-20090521"
+
 KV_dm8000 = "2.6.12-5.1-brcmstb-dm8000"
 PV_dm8000 = "${KV}-20090707"
 
@@ -52,6 +55,13 @@ do_install_dm800() {
 	done
 }
 
+do_install_dm500hd() {
+	install -d ${D}/lib/modules/${KV}/extra
+	for f in *.ko LICENSE; do
+		install -m 0644 ${WORKDIR}/$f ${D}/lib/modules/${KV}/extra/$f;
+	done
+}
+
 do_install_dm7025() {
 	do_install_dm800
 	install -d ${D}${sbindir}
diff --git a/packages/dreambox/dreambox-dvbincludes.bb b/packages/dreambox/dreambox-dvbincludes.bb
index 6438110369..3e07e1a168 100644
--- a/packages/dreambox/dreambox-dvbincludes.bb
+++ b/packages/dreambox/dreambox-dvbincludes.bb
@@ -84,12 +84,6 @@ do_install_dm800() {
 	done;
 }
 
-do_install_dm8000() {
-	install -d ${STAGING_INCDIR}/ci
-	install -d ${STAGING_INCDIR}/dbox
-	install -d ${STAGING_INCDIR}/dreambox
-	install -d ${STAGING_INCDIR}/tuxbox
-	for f in ${INPUT_FILES}; do
-		install -m 0644 ${S}/$f ${STAGING_INCDIR}/$f
-	done;
+do_install_dm500hd() {
+	do_install_dm800
 }
diff --git a/packages/dreambox/dreambox-secondstage.bb b/packages/dreambox/dreambox-secondstage.bb
index 90ceec89c4..2420ba86a2 100644
--- a/packages/dreambox/dreambox-secondstage.bb
+++ b/packages/dreambox/dreambox-secondstage.bb
@@ -8,6 +8,7 @@ PV_dm600pvr = "66"
 PV_dm500plus = "66"
 PV_dm8000 = "73"
 PV_dm800 = "73"
+PV_dm500hd = "70"
 PR = "r0"
 
 RDEPENDS_dm8000 = "dreambox-bootlogo (>=5.1-r3)"
@@ -19,6 +20,7 @@ SECONDSTAGE_UPDATE_SRC = "http://sources.dreamboxupdate.com/download/7020/second
 
 SRC_URI_append_dm8000 = " ${SECONDSTAGE_UPDATE_SRC}"
 SRC_URI_append_dm800 = " ${SECONDSTAGE_UPDATE_SRC}"
+#SRC_URI_append_dm500hd = " ${SECONDSTAGE_UPDATE_SRC}"
 
 S = "${WORKDIR}"
 
@@ -27,7 +29,7 @@ do_stage() {
 	gzip -c ${S}/secondstage-${MACHINE}-${PV}.bin > ${STAGING_LIBDIR}/dreambox-secondstage/main.bin.gz
 }
 
-# the dm{800,8000} secondstage is already compressed (and encrypted)
+# the dm{800,8000,500hd} secondstage is already compressed (and encrypted)
 
 do_stage_dm8000() {
 	install -d ${STAGING_LIBDIR}/dreambox-secondstage
@@ -48,6 +50,14 @@ do_install_dm800() {
 	do_install_dm8000
 }
 
+do_stage_dm500hd() {
+	do_stage_dm8000
+}
+
+#do_install_dm500hd() {
+#	do_install_dm8000
+#}
+
 FILES_${PN} = "/tmp"
 PACKAGE_ARCH := "${MACHINE_ARCH}"
 
diff --git a/packages/images/dreambox-image.bb b/packages/images/dreambox-image.bb
index 848b7afb1f..d1f1ef43df 100644
--- a/packages/images/dreambox-image.bb
+++ b/packages/images/dreambox-image.bb
@@ -121,6 +121,10 @@ OPENDREAMBOX_COMMON_MACHINE_dm800 += "${OPENDREAMBOX_V3_ONLY} ${OPENDREAMBOX_EXP
 OPENDREAMBOX_COMMON_MACHINE_R_dm800 += "${OPENDREAMBOX_EXPERIMENTAL_R} ${WLAN_SUPPORT_R} enigma2-plugin-systemplugins-videomode"
 OPENDREAMBOX_COMMON_MACHINE_D_dm800 += ""
 
+OPENDREAMBOX_COMMON_MACHINE_dm500hd += "${OPENDREAMBOX_V3_ONLY} ${OPENDREAMBOX_EXPERIMENTAL}"
+OPENDREAMBOX_COMMON_MACHINE_R_dm500hd += "${OPENDREAMBOX_EXPERIMENTAL_R} enigma2-plugin-systemplugins-videomode"
+OPENDREAMBOX_COMMON_MACHINE_D_dm500hd += ""
+
 OPENDREAMBOX_COMMON_MACHINE_dm8000 += "${OPENDREAMBOX_V3_ONLY} ${OPENDREAMBOX_EXPERIMENTAL} ${WLAN_SUPPORT} ${WLAN_MADWIFI}"
 OPENDREAMBOX_COMMON_MACHINE_R_dm8000 += "${OPENDREAMBOX_EXPERIMENTAL_R} \
 	${WLAN_SUPPORT_R} ${WLAN_MADWIFI_R} ${DVDPLAYER_SUPPORT_R} \
diff --git a/packages/initscripts/initscripts-1.0/dm500hd/bootup b/packages/initscripts/initscripts-1.0/dm500hd/bootup
new file mode 100644
index 0000000000..d62564873b
--- /dev/null
+++ b/packages/initscripts/initscripts-1.0/dm500hd/bootup
@@ -0,0 +1,70 @@
+echo 10 > /proc/progress
+[ -e /dev/dbox/oled0 ] && ln -s /dev/dbox/oled0 /dev/dbox/lcd0
+
+mount -t sysfs sysfs /sys
+echo 12 > /proc/progress
+
+depmod -Ae
+echo 13 > /proc/progress
+
+for mod in cifs usb-storage sd_mod autofs4 vfat; do
+	modprobe $mod
+done
+
+mount -at nonfs,nosmbfs,noncpfs,nocifs
+echo 14 > /proc/progress
+
+swapon -a
+echo 15 > /proc/progress
+
+tar xzf /etc/var.tar.gz -C /
+echo 16 > /proc/progress
+
+# sleep after 10min
+hdparm -S 120 /dev/discs/disc0/disc
+
+echo 17 > /proc/progress
+
+# set UDMA66, enable dma
+hdparm -d 1 /dev/discs/disc0/disc
+hdparm -X66 /dev/discs/disc0/disc
+
+# accustic management
+hdparm -M 128 /dev/discs/disc0/disc
+
+echo 18 > /proc/progress
+for mod in dreambox_keyboard fp bcm7405; do
+	modprobe $mod
+done
+
+echo 19 > /proc/progress
+
+cat /etc/videomode > /proc/stb/video/videomode
+
+echo 20 > /proc/progress
+
+for mod in rt73 zd1211b; do
+	modprobe $mod
+done
+
+echo 21 > /proc/progress
+
+[ -e /etc/dropbear/dropbear_rsa_host_key ] && /usr/bin/showiframe /boot/bootlogo.mvi || /usr/bin/showiframe /boot/bootlogo_wait.mvi
+
+hostname -F /etc/hostname
+
+echo 22 > /proc/progress
+
+/usr/bin/wdog /usr/bin/dccamd -
+
+echo 23 > /proc/progress
+
+[ -e "/etc/sysctl.conf" ] && /sbin/sysctl -p "/etc/sysctl.conf"
+
+echo 24 > /proc/progress
+
+ldconfig
+
+echo 25 > /proc/progress
+
+ipkg-cl configure
diff --git a/packages/initscripts/initscripts-1.0/dm500hd/halt b/packages/initscripts/initscripts-1.0/dm500hd/halt
new file mode 100644
index 0000000000..123bffaedf
--- /dev/null
+++ b/packages/initscripts/initscripts-1.0/dm500hd/halt
@@ -0,0 +1,27 @@
+#! /bin/sh
+#
+# halt		Execute the halt command.
+#
+# Version:      @(#)halt  2.84-2  07-Jan-2002  miquels@cistron.nl
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+# See if we need to cut the power.
+if test -x /etc/init.d/ups-monitor
+then
+	/etc/init.d/ups-monitor poweroff
+fi
+
+# Don't shut down drives if we're using RAID.
+hddown="-h"
+if grep -qs '^md.*active' /proc/mdstat
+then
+	hddown=""
+fi
+
+showiframe /usr/share/switchoff.mvi
+
+halt -d -f -i -p $hddown
+
+: exit 0
diff --git a/packages/ipkg/ipkg-collateral/dm500hd/dest b/packages/ipkg/ipkg-collateral/dm500hd/dest
new file mode 100644
index 0000000000..e6ddfb168c
--- /dev/null
+++ b/packages/ipkg/ipkg-collateral/dm500hd/dest
@@ -0,0 +1,4 @@
+dest root /
+dest ram /media/ram/
+dest hdd /media/hdd/
+dest usb /media/usb/
diff --git a/packages/linux/linux-dm8000.bb b/packages/linux/linux-dm8000.bb
index 7d0d860233..f1aae08e56 100644
--- a/packages/linux/linux-dm8000.bb
+++ b/packages/linux/linux-dm8000.bb
@@ -32,6 +32,9 @@ SRC_URI += "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-${KV}.tar.bz2 \
 	file://linux-2.6.12-fixup-memsize.patch;patch=1;pnum=1 \
 	http://trappist.elis.ugent.be/~mronsse/cdfs/download/cdfs-2.6.12.tar.bz2"
 
+SRC_URI_append_dm500hd = " file://linux-2.6.12-dm500hd-misc.patch;patch=1;pnum=1 \
+	file://linux-2.6.12-7405-enable-llsc.patch;patch=1;pnum=1"
+
 S = "${WORKDIR}/stblinux-2.6.12"
 
 inherit kernel
diff --git a/packages/linux/linux-dm8000/dm500hd_defconfig b/packages/linux/linux-dm8000/dm500hd_defconfig
new file mode 100644
index 0000000000..9e77ece206
--- /dev/null
+++ b/packages/linux/linux-dm8000/dm500hd_defconfig
@@ -0,0 +1,1743 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12-5.1-brcmstb-dm8000
+# Thu Jan 15 23:32:40 2009
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_BCM3560A0 is not set
+# CONFIG_MIPS_BCM3560B0 is not set
+# CONFIG_MIPS_BCM3563 is not set
+# CONFIG_MIPS_BCM3563C0 is not set
+# CONFIG_MIPS_BCM7038B0 is not set
+# CONFIG_MIPS_BCM7038CX is not set
+# CONFIG_MIPS_BCM97398 is not set
+# CONFIG_MIPS_BCM7110 is not set
+# CONFIG_MIPS_BCM7111 is not set
+# CONFIG_MIPS_BCM7112 is not set
+# CONFIG_MIPS_BCM7115 is not set
+# CONFIG_MIPS_BCM7118AX is not set
+# CONFIG_MIPS_BCM7118A0_NAND is not set
+# CONFIG_MIPS_BCM7312 is not set
+# CONFIG_MIPS_BCM7315 is not set
+# CONFIG_MIPS_BCM7317 is not set
+# CONFIG_MIPS_BCM7318 is not set
+# CONFIG_MIPS_BCM7319 is not set
+# CONFIG_MIPS_BCM7320 is not set
+# CONFIG_MIPS_BCM7328 is not set
+# CONFIG_MIPS_BCM7329 is not set
+# CONFIG_MIPS_BCM97456 is not set
+# CONFIG_MIPS_BCM97456BX is not set
+# CONFIG_MIPS_BCM97456BX_NAND is not set
+# CONFIG_MIPS_BCM7400AX is not set
+# CONFIG_MIPS_BCM7400BX is not set
+# CONFIG_MIPS_BCM7400BX_NAND is not set
+# CONFIG_MIPS_BCM7400AX_NAND is not set
+CONFIG_MIPS_BCM7405AX=y
+# CONFIG_MIPS_BCM97455 is not set
+# CONFIG_MIPS_BCM7401AX is not set
+# CONFIG_MIPS_BCM7401BX is not set
+# CONFIG_MIPS_BCM7401BX_NAND is not set
+# CONFIG_MIPS_BCM97455B0 is not set
+# CONFIG_MIPS_BCM7401CX is not set
+# CONFIG_MIPS_BCM7401CX_NAND is not set
+# CONFIG_MIPS_BCM97455CX is not set
+# CONFIG_MIPS_BCM97455CX_NAND is not set
+# CONFIG_MIPS_BCM97458AX is not set
+# CONFIG_MIPS_BCM97458AX_NAND is not set
+# CONFIG_MIPS_BCM7402S is not set
+# CONFIG_MIPS_BCM7402B0S is not set
+# CONFIG_MIPS_BCM7402A0 is not set
+# CONFIG_MIPS_BCM7402CX is not set
+# CONFIG_MIPS_BCM7402CX_NAND is not set
+# CONFIG_MIPS_BCM7403AX is not set
+# CONFIG_MIPS_BCM7451AX_SMB is not set
+# CONFIG_MIPS_BCM7403AX_NAND is not set
+# CONFIG_MIPS_BCM7452AX is not set
+# CONFIG_MIPS_BCM7452AX_NAND is not set
+# CONFIG_MIPS_BCM7440AX is not set
+# CONFIG_MIPS_BCM7440BX is not set
+# CONFIG_MIPS_BCM7440BX_NAND is not set
+# CONFIG_MIPS_BCM93730 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_BRCM97XXX=y
+CONFIG_MIPS_BCM7405A0=y
+CONFIG_MIPS_BCM7405=y
+CONFIG_MIPS_BRCM=y
+# CONFIG_BRCM_7XXX_SERIAL is not set
+CONFIG_LONG_LONG_SUPPORT=y
+CONFIG_SERIAL=y
+CONFIG_MIPS_L1_CACHE_SHIFT=6
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_MIPS32=y
+# CONFIG_MIPS64 is not set
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_NAMES is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK_ROMBLOCK is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BCM7XXX=y
+# CONFIG_MTD_MULTI_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_RAMTD is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DM8000 is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Broadcom NAND Flash Device Drivers
+#
+CONFIG_MTD_BRCMNAND=y
+# CONFIG_MTD_BRCMNAND_VERIFY_WRITE is not set
+CONFIG_MTD_BRCMNAND_VERSION=2
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDE_SATA=y
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+CONFIG_BLK_DEV_SVWKS=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_PHYSDEV is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_NET_CLS_IND=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_RX=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_NETDEVICES=y
+CONFIG_NETIF_DMA=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BCMINTEMAC_7038=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=0
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+CONFIG_DVB=y
+CONFIG_DVB_CORE=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_DVB_AV7110 is not set
+# CONFIG_DVB_BUDGET is not set
+# CONFIG_DVB_BUDGET_CI is not set
+# CONFIG_DVB_BUDGET_AV is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_DIBUSB is not set
+# CONFIG_DVB_CINERGYT2 is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+# CONFIG_DVB_B2C2_SKYSTAR is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_STV0299=y
+# CONFIG_DVB_CX24110 is not set
+CONFIG_DVB_TDA8083=m
+# CONFIG_DVB_TDA80XX is not set
+CONFIG_DVB_MT312=m
+CONFIG_DVB_VES1X93=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+CONFIG_DVB_L64781=m
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_ATMEL_AT76C651 is not set
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terresterial DTV) frontends
+#
+# CONFIG_DVB_NXT2002 is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA MIPS devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_BRCM is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_AUDIO=m
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+CONFIG_USB_MIDI=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+CONFIG_USB_EGALAX=m
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=m
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+CONFIG_MINIX_FS=m
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+CONFIG_CDFS_FS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_DEBUG=y
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_UFS_FS=m
+CONFIG_UFS_FS_WRITE=y
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="root=/dev/mtdblock3 rootfstype=jffs2 rw mem=128M console=null"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/packages/linux/linux-dm8000/linux-2.6.12-7405-enable-llsc.patch b/packages/linux/linux-dm8000/linux-2.6.12-7405-enable-llsc.patch
new file mode 100644
index 0000000000..cb49f080b1
--- /dev/null
+++ b/packages/linux/linux-dm8000/linux-2.6.12-7405-enable-llsc.patch
@@ -0,0 +1,14 @@
+diff -Naur stblinux-2.6.12-org/arch/mips/Makefile stblinux-2.6.12/arch/mips/Makefile
+--- stblinux-2.6.12-org/arch/mips/Makefile	2009-01-23 21:01:31.000000000 +0100
++++ stblinux-2.6.12/arch/mips/Makefile	2009-01-23 21:03:12.000000000 +0100
+@@ -889,9 +889,8 @@
+ core-$(CONFIG_MIPS_BCM7405A0) += arch/mips/brcmstb/brcm97405a0/
+ core-$(CONFIG_MIPS_BCM7405A0) += arch/mips/brcmstb/common/
+ load-$(CONFIG_MIPS_BCM7405A0) := 0x80001000
+-ifdef CONFIG_SMP
++
+ cflags-$(CONFIG_MIPS_BCM7405A0)	+= -Iinclude/asm-mips/mach-brcmstb
+-endif
+ 
+ #
+ #
diff --git a/packages/linux/linux-dm8000/linux-2.6.12-dm500hd-misc.patch b/packages/linux/linux-dm8000/linux-2.6.12-dm500hd-misc.patch
new file mode 100644
index 0000000000..6f2fa4e379
--- /dev/null
+++ b/packages/linux/linux-dm8000/linux-2.6.12-dm500hd-misc.patch
@@ -0,0 +1,51 @@
+Index: stblinux-2.6.12/drivers/serial/8250.c
+===================================================================
+--- stblinux-2.6.12.orig/drivers/serial/8250.c	2009-01-20 18:17:12.000000000 +0100
++++ stblinux-2.6.12/drivers/serial/8250.c	2009-01-20 18:17:27.000000000 +0100
+@@ -1800,6 +1800,9 @@
+ 	 */
+ 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+ 	quot = serial8250_get_divisor(port, baud);
++	
++	quot = 5;
++	baud = 1000000;
+ 
+ 	/*
+ 	 * THT: Workaround for Ikos, forcing a value of quot = 14
+@@ -1909,8 +1912,8 @@
+ 		serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ 	}
+ 
+-	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */
+-	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
++//	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */
++//	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
+ 
+ 	/*
+ 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+Index: stblinux-2.6.12/Makefile
+===================================================================
+--- stblinux-2.6.12.orig/Makefile	2009-01-20 18:17:44.000000000 +0100
++++ stblinux-2.6.12/Makefile	2009-01-20 18:17:48.000000000 +0100
+@@ -2,7 +2,7 @@
+ PATCHLEVEL = 6
+ SUBLEVEL = 12
+ # STABLE_VERSION = .2
+-EXTRAVERSION =-5.1-brcmstb-dm8000
++EXTRAVERSION =-5.1-brcmstb-dm500hd
+ NAME=Woozy Numbat
+ 
+ # *DOCUMENTATION*
+Index: stblinux-2.6.12/arch/mips/brcmstb/lib/udivdi3.c
+===================================================================
+--- stblinux-2.6.12.orig/arch/mips/brcmstb/lib/udivdi3.c	2009-01-20 18:23:12.000000000 +0100
++++ stblinux-2.6.12/arch/mips/brcmstb/lib/udivdi3.c	2009-01-20 18:23:16.000000000 +0100
+@@ -32,7 +32,7 @@
+ #include "gcclib.h"
+ #include "longlong.h"
+ 
+-static const UQItype __clz_tab[] =
++const UQItype __clz_tab[] =
+ {
+   0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
+   6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
diff --git a/packages/linux/linux-dm8000/linux-2.6.12-dm500hd-nand.patch b/packages/linux/linux-dm8000/linux-2.6.12-dm500hd-nand.patch
new file mode 100644
index 0000000000..da1cbe9952
--- /dev/null
+++ b/packages/linux/linux-dm8000/linux-2.6.12-dm500hd-nand.patch
@@ -0,0 +1,221 @@
+diff -Naur stblinux-2.6.12-org/drivers/mtd/brcmnand/bcm7xxx-nand.c stblinux-2.6.12/drivers/mtd/brcmnand/bcm7xxx-nand.c
+--- stblinux-2.6.12-org/drivers/mtd/brcmnand/bcm7xxx-nand.c	2008-02-28 18:40:17.000000000 +0100
++++ stblinux-2.6.12/drivers/mtd/brcmnand/bcm7xxx-nand.c	2008-02-28 18:45:03.000000000 +0100
+@@ -78,19 +78,28 @@
+ 
+ static struct mtd_partition bcm7XXX_nand_parts[] = 
+ {
+-	{ name: "rootfs",		offset: 0,					size: DEFAULT_ROOTFS_SIZE },	
+-#ifdef CONFIG_MTD_ECM_PARTITION
+-#define AVAIL1_PART	(1)
+-#define OCAP_PART	(2)
+-	{ name: "avail1",		offset: DEFAULT_ROOTFS_SIZE,	size: DEFAULT_AVAIL1_SIZE },
+-	{ name: "ocap",		offset: DEFAULT_ROOTFS_SIZE+DEFAULT_AVAIL1_SIZE,	size: DEFAULT_OCAP_SIZE },	
+-#endif
+-	{ name: "kernel",		offset: 0x00800000,			size: 4<<20 },
+-	{ name: "cfe",		offset: 0x00C00000,			size: 2<<20 },
+-	{ name: "nvm",		offset: 0x00E00000,			size: 1<<20 },
+-	/* BBT 1MB not mountable by anyone */
+-	{ name: "data", 		offset: 0x400000000,			size: 0 },
+-};
++		/* modified for Dreambox DM800 */
++	{
++		.name	= "complete",
++		.offset	= 0,
++		.size	= 64*1024*1024
++	},
++	{
++		.name	= "loader",
++		.offset	= 0,
++		.size	= 256*1024
++	},
++	{
++		.name	= "boot partition",
++		.offset	= 256*1024,
++		.size	= (4*1024-256)*1024
++	},
++	{
++		.name	= "root partition",
++		.offset	= 4*1024*1024,
++		.size	= 60*1024*1024
++	},
++ };
+ 
+ struct brcmnand_info {
+ 	struct mtd_info		mtd;
+@@ -106,100 +115,6 @@
+ }
+ //EXPORT_SYMBOL(get_brcmnand_handle);
+ 
+-
+-/* 
+- * Size and offset are variable, depending on the size of the chip, but 
+- * cfe_kernel always starts at 1FC0_0000 and is 4MB size.
+- * The entire reserved area (kernel + CFE + BBT) occupies the last 8 MB of the flash.
+- */
+-static void __devinit 
+-brcmnanddrv_setup_mtd_partitions(struct brcmnand_info* nandinfo, int* numParts)
+-{
+-	struct mtd_info* mtd = &nandinfo->mtd;
+-	unsigned long size; 
+-	int i = 0;
+-	unsigned int ecm_size = DEFAULT_ECM_SIZE;
+-	unsigned int ocap_size = DEFAULT_OCAP_SIZE;
+-	unsigned int avail1_size = DEFAULT_AVAIL1_SIZE;
+-
+-	if (mtd->size <= (512<<20)) {
+-		size = mtd->size; 	// mtd->size may be different than nandinfo->size
+-						// Relies on this being called after brcmnand_scan
+-		*numParts = ARRAY_SIZE(bcm7XXX_nand_parts) - 1;
+-	}
+-	else {
+-		size = 512 << 20;
+-		*numParts = ARRAY_SIZE(bcm7XXX_nand_parts);
+-	}
+-
+-#ifdef CONFIG_MTD_ECM_PARTITION
+-	/* Do not generate AVAIL1 partition if usable flash size is less than 64MB */
+-	if (size < (64<<20)) {
+-		ecm_size = DEFAULT_OCAP_SIZE;
+-		bcm7XXX_nand_parts[AVAIL1_PART].size = avail1_size = 0;
+-		(*numParts)--;
+-	}
+-	else {
+-		int factor = size / (64 << 20); // Remember size is capped at 512MB
+-		
+-		bcm7XXX_nand_parts[OCAP_PART].size = ocap_size = factor*DEFAULT_OCAP_SIZE;
+-		bcm7XXX_nand_parts[AVAIL1_PART].size = avail1_size = factor*DEFAULT_AVAIL1_SIZE;
+-		ecm_size = ocap_size + avail1_size;
+-	}
+-
+-#endif
+-	nandinfo->parts = bcm7XXX_nand_parts;
+-	bcm7XXX_nand_parts[0].size = size - DEFAULT_RESERVED_SIZE - ecm_size;
+-	bcm7XXX_nand_parts[0].oobsel = &mtd->oobinfo;
+-printk("Part[%d] name=%s, size=%x, offset=%x\n", i, bcm7XXX_nand_parts[0].name, 
+-bcm7XXX_nand_parts[0].size, bcm7XXX_nand_parts[0].offset);
+-
+-	for (i=1; i<  ARRAY_SIZE(bcm7XXX_nand_parts) - 1; i++) {
+-#ifdef CONFIG_MTD_ECM_PARTITION
+-		//if (0 == bcm7XXX_nand_parts[i].size)
+-		//	continue;
+-		/* Skip avail1 if size is less than 64 MB) */
+- 		if (0 == avail1_size && AVAIL1_PART == i) {
+-			bcm7XXX_nand_parts[i].offset = bcm7XXX_nand_parts[i-1].size + bcm7XXX_nand_parts[i-1].offset;
+-			continue;
+-		}
+-#endif
+-		bcm7XXX_nand_parts[i].offset = bcm7XXX_nand_parts[i-1].size + bcm7XXX_nand_parts[i-1].offset;
+-		// For now every partition uses the same oobinfo
+-		bcm7XXX_nand_parts[i].oobsel = &mtd->oobinfo;
+-printk("Part[%d] name=%s, size=%x, offset=%x\n", i, bcm7XXX_nand_parts[i].name, 
+-bcm7XXX_nand_parts[i].size, bcm7XXX_nand_parts[i].offset);
+-	}
+-
+-	
+-	if  (mtd->size > (512 << 20)) { // For total flash size > 512MB, we must split the rootfs into 2 partitions
+-		i = *numParts - 1;
+-		bcm7XXX_nand_parts[i].offset = 512 << 20;
+-		bcm7XXX_nand_parts[i].size = mtd->size - (513 << 20);
+-		bcm7XXX_nand_parts[i].oobsel = &mtd->oobinfo;
+-#ifdef CONFIG_MTD_ECM_PARTITION
+-printk("Part[%d] name=%s, size=%x, offset=%x\n", avail1_size? i: i-1, bcm7XXX_nand_parts[i].name, 
+-bcm7XXX_nand_parts[i].size, bcm7XXX_nand_parts[i].offset);
+-#else
+-printk("Part[%d] name=%s, size=%x, offset=%x\n", i, bcm7XXX_nand_parts[i].name, 
+-bcm7XXX_nand_parts[i].size, bcm7XXX_nand_parts[i].offset);
+-#endif
+-
+-	}
+-
+-#ifdef CONFIG_MTD_ECM_PARTITION
+-	/* Shift partitions 1 up if avail1_size is 0 */
+-	if (0 == avail1_size) {
+-		for (i=AVAIL1_PART; i < *numParts; i++) {
+-			bcm7XXX_nand_parts[i].offset = bcm7XXX_nand_parts[i+1].offset;
+-			bcm7XXX_nand_parts[i].size = bcm7XXX_nand_parts[i+1].size;
+-		}
+-		bcm7XXX_nand_parts[*numParts].offset = 0;
+-		bcm7XXX_nand_parts[*numParts].size = 0;
+-	}
+-#endif
+-}
+-
+ static int __devinit brcmnanddrv_probe(struct device *dev)
+ {
+ 	struct platform_device *pdev = to_platform_device(dev);
+@@ -234,14 +149,12 @@
+ 	if (brcmnand_scan(&info->mtd, MAX_NAND_CS)) {
+ 		err = -ENXIO;
+ 		goto out_free_info;
+-	}
+-
+-	printk("	numchips=%d, size=%08x\n", info->brcmnand.numchips, info->mtd.size);
+-	brcmnanddrv_setup_mtd_partitions(info, &numParts);
+-//printk("	add_mtd_partitions\n");
+-	add_mtd_partitions(&info->mtd, info->parts, numParts);
+-//printk("	dev_set_drvdata\n");	
+-	dev_set_drvdata(&pdev->dev, info);
++ 	}
++ 
++ 	printk("	numchips=%d, size=%08x\n", info->brcmnand.numchips, info->mtd.size);
++	add_mtd_partitions(&info->mtd, bcm7XXX_nand_parts, 4);
++//printk("	dev_set_drvdata\n");
++ 	dev_set_drvdata(&pdev->dev, info);
+ //printk("<-- brcmnanddrv_probe\n");
+ 	return 0;
+ 
+diff -Naur stblinux-2.6.12-org/drivers/mtd/brcmnand/brcmnand_base.c stblinux-2.6.12/drivers/mtd/brcmnand/brcmnand_base.c
+--- stblinux-2.6.12-org/drivers/mtd/brcmnand/brcmnand_base.c	2008-02-28 18:40:17.000000000 +0100
++++ stblinux-2.6.12/drivers/mtd/brcmnand/brcmnand_base.c	2008-02-28 18:46:02.000000000 +0100
+@@ -296,7 +296,15 @@
+ 		.options = NAND_USE_FLASH_BBT,
+ 		.timing1 = 0, .timing2 = 0,
+ 	},
+-	
++
++	{	/* 20 */
++		.chipId = HYNIX_HY27US08121A,
++		.mafId = FLASHTYPE_HYNIX,
++		.chipIdStr = "Hynix HY27US08121A (dream)",
++		.options = NAND_USE_FLASH_BBT,
++		.timing1 = 0, .timing2 = 0,
++	},
++
+ 	{	/* LAST DUMMY ENTRY */
+ 		.chipId = 0,
+ 		.mafId = 0,
+Index: stblinux-2.6.12/drivers/mtd/brcmnand/brcmnand_base.c
+===================================================================
+--- stblinux-2.6.12.orig/drivers/mtd/brcmnand/brcmnand_base.c	2009-01-20 16:25:39.000000000 +0100
++++ stblinux-2.6.12/drivers/mtd/brcmnand/brcmnand_base.c	2009-01-20 16:27:18.000000000 +0100
+@@ -4157,9 +4157,9 @@
+ 	// pbase is the physical address of the "logical" start of flash.  Logical means how Linux sees it,
+ 	// and is given by the partition table defined in bcm7xxx-nand.c
+ 	// The "physical" start of the flash is always at 1FC0_0000
+-	if (this->chipSize <= (256<<20)) 
+-		this->pbase = 0x20000000 - this->chipSize;
+-	else // 512MB and up
++//	if (this->chipSize <= (256<<20)) 
++//		this->pbase = 0x20000000 - this->chipSize;
++//	else // 512MB and up
+ 		this->pbase = 0; 
+ 	// vbase is the address of the flash cache array
+ 	this->vbase = (void*) (0xb0000000+BCHP_NAND_FLASH_CACHEi_ARRAY_BASE);  // Start of Buffer Cache
+@@ -4436,6 +4436,7 @@
+ static unsigned int 
+ get_rom_size(unsigned long* outp_cs0Base)
+ {
++#if 0
+ 	volatile unsigned long strap_ebi_rom_size, sun_top_ctrl_strap_value;
+ 	uint32_t romSize = 0;
+ 
+@@ -4468,6 +4469,8 @@
+ 		BUG();
+ 	}
+ 	return romSize;
++#endif
++	return 64<<20;
+ }
+ 
+ /*
diff --git a/packages/netbase/netbase/dm500hd/interfaces b/packages/netbase/netbase/dm500hd/interfaces
new file mode 100644
index 0000000000..673618f636
--- /dev/null
+++ b/packages/netbase/netbase/dm500hd/interfaces
@@ -0,0 +1,10 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+# Ethernet
+auto eth0
+iface eth0 inet dhcp
+
diff --git a/packages/sysvinit/sysvinit/dm500hd/inittab b/packages/sysvinit/sysvinit/dm500hd/inittab
new file mode 100644
index 0000000000..c32d77fe55
--- /dev/null
+++ b/packages/sysvinit/sysvinit/dm500hd/inittab
@@ -0,0 +1,32 @@
+# /etc/inittab: init(8) configuration.
+# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
+
+# The default runlevel.
+id:3:initdefault:
+
+# Boot-time system configuration/initialization script.
+# This is run first except when booting in emergency (-b) mode.
+si::sysinit:/etc/init.d/rcS
+
+# What to do in single-user mode.
+~~:S:wait:/sbin/sulogin
+
+# /etc/init.d executes the S and K scripts upon change
+# of runlevel.
+#
+# Runlevel 0 is halt.
+# Runlevel 1 is single-user.
+# Runlevels 2-5 are multi-user.
+# Runlevel 6 is reboot.
+
+l0:0:wait:/etc/init.d/rc 0
+l1:1:wait:/etc/init.d/rc 1
+l2:2:wait:/etc/init.d/rc 2
+l3:3:wait:/etc/init.d/rc 3
+l4:4:wait:/etc/init.d/rc 4
+l5:5:wait:/etc/init.d/rc 5
+l6:6:wait:/etc/init.d/rc 6
+# Normally not reached, but fallthrough in case of emergency.
+z6:6:respawn:/sbin/sulogin
+
+S:5:respawn:/sbin/getty tts/0 115200
diff --git a/packages/tuxbox/tuxbox-libtuxtxt.bb b/packages/tuxbox/tuxbox-libtuxtxt.bb
index 07688be8e7..289b5c18f7 100644
--- a/packages/tuxbox/tuxbox-libtuxtxt.bb
+++ b/packages/tuxbox/tuxbox-libtuxtxt.bb
@@ -6,12 +6,14 @@ SRC_URI = "cvs://anoncvs@cvs.tuxbox.org/cvs/tuxbox;module=apps/tuxbox/libs;metho
 
 SRC_URI_append_dm7025 = " file://libtuxtxt_bugfix.patch;patch=1 file://libtuxtxt_allow_different_demux.diff;patch=1"
 SRC_URI_append_dm800 = " file://libtuxtxt_bugfix.patch;patch=1 file://libtuxtxt_allow_different_demux.diff;patch=1"
+SRC_URI_append_dm500hd = " file://libtuxtxt_bugfix.patch;patch=1 file://libtuxtxt_allow_different_demux.diff;patch=1"
 SRC_URI_append_dm8000 = " file://libtuxtxt_bugfix.patch;patch=1 file://libtuxtxt_allow_different_demux.diff;patch=1"
 
 SRCDATE_dm600pvr = "20070307"
 SRCDATE_dm500plus = "20070307"
 SRCDATE_dm7025 = "20050912"
 SRCDATE_dm800 = "20050912"
+SRCDATE_dm500hd = "20050912"
 SRCDATE_dm8000 = "20050912"
 SRCDATE_dm7020 = "20070307"