foonas-init: Remove

8 files changed, 0 insertions, 260 deletions

diff --git a/packages/foonas-init/files/initscripts/fixfstab b/packages/foonas-init/files/initscripts/fixfstab
deleted file mode 100644
index 67116a12fd..0000000000
--- a/packages/foonas-init/files/initscripts/fixfstab
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-# validate /etc/fstab against the current UUID list in
-# /etc/uuid_by_partition
-#
-. /etc/default/functions
-pfile=/etc/uuid_by_partition
-
-#
-# use debug to find out what is going on
-test "$1" = start -o "$1" = debug || exit 0
-
-#
-# obtain the current list of parititions with UUIDs
-newlist="$(uuid_by_partition)"
-
-if test -r "$pfile"
-then
-	# read the old list
-	oldlist="$(cat "$pfile")"
-	#
-	# if it hasn't changed nothing need be done
-	test "$newlist" = "$oldlist" && exit 0
-	#
-	# it has changed, but this only matters if
-	# a previously existing uuid has moved, build
-	# a list of old device vs new device for every
-	# uuid which has moved
-	changedlist="$(
-		{	echo "$oldlist"
-			echo "$newlist"
-		} | awk 'device[$2] == ""{device[$2] = $1}
-			device[$2] != $1{print device[$2], $1}')"
-
-	if test -n "$changedlist"
-	then
-		# at least one partition has moved, scan the
-		# current fstab to see if it has a reference
-		# to this partition
-		changedfstab="$(
-			{	echo "$changedlist"
-				echo '#fstab'
-				cat /etc/fstab
-			} | awk 'BEGIN{list=1}
-				list==1 && $0=="#fstab"{list=0; continue}
-				list==1{new[$1] = $2; continue}
-				new[$1] != ""{print $1, new[$1]}')"
-
-		# if this list is not empty edit the fstab
-		if test -n "$changedfstab"
-		then
-			rm -f /tmp/fstab.$$
-			# if the edit fails then do not overwrite the old
-			# partition list - just exit with an error
-			{	echo "$changedlist"
-				echo '#fstab'
-				cat /etc/fstab
-			} | awk 'BEGIN{list=1}
-				list==1 && $0=="#fstab"{list=0; continue}
-				list==1{new[$1] = $2; continue}
-				new[$1] != ""{$1 = new[$1]}
-				{print}' >/tmp/fstab.$$ || {
-				if test "$1" = start
-				then
-					logger -s "/etc/init.d/fixfstab: /tmp/fstab.$$: awk failed"
-				else
-					echo "debug: awk script failed with:" >&2
-					echo "$changedlist" >&2
-					echo "output in /tmp/fstab.$$" >&2
-				fi
-				exit 1
-			}
-
-			if test "$1" = start
-			then
-				mv /tmp/fstab.$$ /etc/fstab || {
-					logger -s "/etc/init.d/fixfstab: /tmp/fstab.$$: update failed"
-					exit 1
-				}
-			else
-				echo "debug: fstab changed:"
-				diff -u /etc/fstab /tmp/fstab.$$
-			fi
-		fi
-	fi
-fi
-
-# write the new list to the file, only if we
-# are doing something...
-test "$1" = start && echo "$newlist" >"$pfile"
-
-exit 0
diff --git a/packages/foonas-init/files/initscripts/loadmodules.sh b/packages/foonas-init/files/initscripts/loadmodules.sh
deleted file mode 100644
index c5d44d1067..0000000000
--- a/packages/foonas-init/files/initscripts/loadmodules.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-
-. /etc/default/modulefunctions # Load module loading logic
-
-loadnetmods
-
-loaddiskmods
-
-loadmiscmods
-
-exit 0
diff --git a/packages/foonas-init/files/initscripts/rmrecovery b/packages/foonas-init/files/initscripts/rmrecovery
deleted file mode 100644
index eec822b154..0000000000
--- a/packages/foonas-init/files/initscripts/rmrecovery
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-# Run to remove /.recovery if the boot seems to have succeeded
-test -e /.recovery && rm -f /.recovery
-exit 0
diff --git a/packages/foonas-init/files/initscripts/sysconfsetup b/packages/foonas-init/files/initscripts/sysconfsetup
deleted file mode 100644
index a4f9074d9c..0000000000
--- a/packages/foonas-init/files/initscripts/sysconfsetup
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/sh
-# This script is run once when the system first boots.  Its sole
-# purpose is to create /etc/default/sysconf (the overall system
-# configuration file) and other files derived from this.
-#
-# The script runs immediately after S10checkroot.sh - this is the
-# point at which the rootfs will be mounted rw even if the kernel
-# booted with it ro.
-#
-# rm or mv the file (/etc/default/sysconf) to recreate it, run this
-# script with the reload option to overwrite the system files.  The
-# configuration files described in sysconf_reload (in
-# /sbin/sysconf) will be overwritten on reload.
-#
-# start:  standard startup, do a complete (auto) restore if necessary
-# reinit: always do a complete auto restore
-# reload: just reload sysconf (no config files!)
-#
-# /etc/default/functions contains useful utility functions - it's
-# in a separate file so that it can be loaded by any script
-. /etc/default/functions
-load_functions sysconf || exit 1
-#
-case "$1" in
-start)	test -s /etc/default/sysconf || {
-		if sysconf_read
-		then
-			if sysconf_valid
-			then
-				sysconf_restore auto
-			else
-				sysconf_reload
-			fi
-		else
-			sysconf_default
-			sysconf_reload
-		fi
-	};;
-
-reload)	test -s /etc/default/sysconf || sysconf_read || sysconf_default
-	sysconf_reload;;
-
-reinit)	sysconf_restore auto;;
-
-*)	;;
-esac
diff --git a/packages/foonas-init/files/initscripts/syslog.buffer b/packages/foonas-init/files/initscripts/syslog.buffer
deleted file mode 100644
index 9285c02946..0000000000
--- a/packages/foonas-init/files/initscripts/syslog.buffer
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# Invoke the syslog startup if the configuration
-# uses (only) 'buffer' as the DESTINATION
-DESTINATION=
-test -f /etc/syslog.conf && . /etc/syslog.conf
-doit=
-
-for d in $DESTINATION
-do
-	case "$d" in
-	buffer)	doit=1;;
-	file)	exit 0;;
-	remote)	exit 0;;
-	*)	echo "/etc/syslog.conf: $d: unknown destination" >&2
-		exit 1;;
-	esac
-done
-
-test -n "$doit" -a -x /etc/init.d/syslog &&
-	exec /etc/init.d/syslog "$@"
-
-exit 0
diff --git a/packages/foonas-init/files/initscripts/syslog.file b/packages/foonas-init/files/initscripts/syslog.file
deleted file mode 100644
index 80ee5f0174..0000000000
--- a/packages/foonas-init/files/initscripts/syslog.file
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# Invoke the syslog startup if the configuration
-# uses 'file' (and, optionally, buffer) as the DESTINATION
-DESTINATION=
-test -f /etc/syslog.conf && . /etc/syslog.conf
-doit=
-
-for d in $DESTINATION
-do
-	case "$d" in
-	buffer)	:;;
-	file)	doit=1;;
-	remote)	exit 0;;
-	*)	echo "/etc/syslog.conf: $d: unknown destination" >&2
-		exit 1;;
-	esac
-done
-
-test -n "$doit" -a -x /etc/init.d/syslog &&
-	exec /etc/init.d/syslog "$@"
-
-exit 0
diff --git a/packages/foonas-init/files/initscripts/syslog.network b/packages/foonas-init/files/initscripts/syslog.network
deleted file mode 100644
index 3d7f4ab8e6..0000000000
--- a/packages/foonas-init/files/initscripts/syslog.network
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-#
-# Invoke the syslog startup if the configuration
-# uses 'remote', or doesn't use 'buffer' or 'file'
-DESTINATION=
-test -f /etc/syslog.conf && . /etc/syslog.conf
-doit=
-doneit=
-
-for d in $DESTINATION
-do
-	case "$d" in
-	buffer)	doneit=1;;
-	file)	doneit=1;;
-	remote)	doit=1;;
-	*)	doit=1
-		echo "/etc/syslog.conf: $d: unknown destination" >&2
-		exit 1;;
-	esac
-done
-
-# One of doneit or doit is set unless the DESTINATION value
-# is empty (which is probably an error), let syslog handle
-# the error.
-test \( -n "$doit" -o -z "$doneit" \) -a -x /etc/init.d/syslog &&
-	exec /etc/init.d/syslog "$@"
-
-exit 0
diff --git a/packages/foonas-init/files/initscripts/umountinitrd.sh b/packages/foonas-init/files/initscripts/umountinitrd.sh
deleted file mode 100644
index b590ae68b5..0000000000
--- a/packages/foonas-init/files/initscripts/umountinitrd.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# umount /mnt, which is where the initrd ends up mounted
-# if the directory /initrd is not present, if this fails
-# then the /initrd is mounted and we want to remount that
-# ro - this works round the shutdown -r hang problem
-. /etc/default/functions
-#
-# if we are turnup'ed to disk, then just unmount the initrd all together
-#
-if [ -e /initrd/dev/.devfsd ]; then 
-	[ "$VERBOSE" = "very" ] && echo "Unmounting initrd..."
-	umount /initrd/dev
-	umount /initrd
-	exit 0
-fi
-
-while read device directory remainder
-do
-	case "$directory" in
-	/mnt)	echo "InitRD: unmount initrd on /mnt" >&2
-		umount /mnt;;
-	/initrd)# need the device for a remount
-		ffspart=Flashdisk
-		ffsdev="$(mtblockdev $ffspart)"
-		echo "InitRD: remount $ffdev read-only on /initrd" >&2
-		if test -n "$ffsdev" -a -b "$ffsdev"
-		then
-			mount -o remount,ro "$ffsdev" /initrd
-		else
-			echo "Flashdisk: $ffsdev: flash device not found" >&2
-		fi;;
-	esac
-done </proc/mounts