rename packages/ to recipes/ per earlier agreement

See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko <denis@denix.org> Acked-by: Mike Westerhof <mwester@dls.net> Acked-by: Philip Balister <philip@balister.org> Acked-by: Khem Raj <raj.khem@gmail.com> Acked-by: Marcin Juszkiewicz <hrw@openembedded.org> Acked-by: Koen Kooi <koen@openembedded.org> Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
author: Denys Dmytriyenko <denis@denix.org> 2009-03-17 14:32:59 -0400
committer: Denys Dmytriyenko <denis@denix.org> 2009-03-17 14:32:59 -0400
commit: 709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree: 37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/ixp425-eth
parent: fa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)
download: openembedded-709c4d66e0b107ca606941b988bad717c0b45d9b.tar.gz
54 files changed, 4765 insertions, 0 deletions
diff --git a/recipes/ixp425-eth/files/2.6.13.patch b/recipes/ixp425-eth/files/2.6.13.patch
new file mode 100644
index 0000000000..7e8bea1b5d
--- /dev/null
+++ b/recipes/ixp425-eth/files/2.6.13.patch
@@ -0,0 +1,41 @@
+# Patches for compilation with 2.6.13.2
+#
+--- dir/ixp425_eth.c	2005-09-23 18:34:54.753729121 -0700
++++ dir/ixp425_eth.c	2005-09-23 18:37:48.908688002 -0700
+@@ -659,7 +659,9 @@
+ 	skb->pkt_type = PACKET_HOST;    /* Default type */
+         skb->ip_summed = 0;
+         skb->priority = 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+         skb->security = 0;
++#endif
+ 
+ /* Some packets may get incorrectly process by netfilter firewall software
+  * if CONFIG_NETFILTER is enabled and filtering is in use.  The solution is to
+@@ -2358,8 +2362,14 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+ int dev_set_mac_address(struct net_device *dev, struct sockaddr *saddr)
+ {
++#else
++static int set_mac_address(struct net_device *dev, void *saddrIn)
++{
++    struct sockaddr *saddr = saddrIn;
++#endif
+     int res;
+     priv_data_t *priv = dev->priv;
+     IxEthAccMacAddr npeMacAddr;
+@@ -2476,7 +2486,11 @@
+     ndev->poll_controller = ixp425eth_poll_controller;
+ #endif
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+     ndev->set_mac_address = dev_set_mac_address;
++#else
++    ndev->set_mac_address = set_mac_address;
++#endif
+ 
+     memcpy(ndev->dev_addr, &default_mac_addr[priv->port_id].macAddress,
+            IX_IEEE803_MAC_ADDRESS_SIZE);
diff --git a/recipes/ixp425-eth/files/2.6.14.patch b/recipes/ixp425-eth/files/2.6.14.patch
new file mode 100644
index 0000000000..e93edb6e9b
--- /dev/null
+++ b/recipes/ixp425-eth/files/2.6.14.patch
@@ -0,0 +1,28 @@
+# change in field semantic in 2.6.14
+--- dir/ixp425_eth.c	2005-09-24 17:50:57.828607113 -0700
++++ dir/ixp425_eth.c	2005-09-24 17:54:19.593303365 -0700
+@@ -668,7 +668,11 @@
+  * reset the following fields in the skbuff before re-using it on the Rx-path
+  */
+ #ifdef CONFIG_NETFILTER
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+         skb->nfmark = skb->nfcache = 0;
++#else
++        skb->nfmark = 0;
++#endif
+         nf_conntrack_put(skb->nfct);
+         skb->nfct = NULL;
+ #ifdef CONFIG_NETFILTER_DEBUG
+@@ -1300,8 +1300,12 @@
+     skb->len -= header_len;
+     
+     /* fill the pkt arrival time (set at the irq callback entry) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+     skb->stamp.tv_sec = irq_stamp.tv_sec;
+     skb->stamp.tv_usec = irq_stamp.tv_usec;
++#else
++    skb_set_timestamp(skb, &irq_stamp);
++#endif
+     
+     /* fill the input device field */
+     skb->dev = dev;
diff --git a/recipes/ixp425-eth/files/ethhdr.patch b/recipes/ixp425-eth/files/ethhdr.patch
new file mode 100644
index 0000000000..79c9fef34f
--- /dev/null
+++ b/recipes/ixp425-eth/files/ethhdr.patch
@@ -0,0 +1,25 @@
+
+#
+# Patch managed by http://www.holgerschurig.de/patcher.html
+#
+
+--- ixp425-eth-1.1-r0/ixp425_eth.c~ethhdr
++++ ixp425-eth-1.1-r0/ixp425_eth.c
+@@ -1307,7 +1307,7 @@
+ 	 * and its constants are taken from the eth_type_trans()
+ 	 * function.
+ 	 */
+-	struct ethhdr *eth = skb->mac.ethernet;
++	struct ethhdr *eth = eth_hdr(skb);
+ 	unsigned short hproto = ntohs(eth->h_proto);
+ 	
+ 	if (hproto >= 1536)
+@@ -1349,7 +1349,7 @@
+              * mode is set This costs
+              * a lookup inside the packet payload.
+              */
+-            struct ethhdr *eth = skb->mac.ethernet;
++            struct ethhdr *eth = eth_hdr(skb);
+             unsigned char *hdest = eth->h_dest;
+ 
+             if (memcmp(hdest, dev->dev_addr, ETH_ALEN)!=0)
diff --git a/recipes/ixp425-eth/files/intdriven.patch b/recipes/ixp425-eth/files/intdriven.patch
new file mode 100644
index 0000000000..88b2444b5e
--- /dev/null
+++ b/recipes/ixp425-eth/files/intdriven.patch
@@ -0,0 +1,98 @@
+--- ixp425-eth-1.1-r4/ixp425_eth.c	2005-06-16 00:47:55.360598896 -0700
++++ ixp425-eth-1.1-r4/ixp425_eth.c	2005-06-16 18:42:09.840377651 -0700
+@@ -1028,6 +1030,7 @@
+  */
+ 
+ /* PMU Timer reload : this should be done at each interrupt */
++#if 0 /* UNUSED - used for polling */
+ static void dev_pmu_timer_restart(void)
+ {
+     __asm__(" mcr p14,0,%0,c1,c1,0\n"  /* write current counter */
+@@ -1039,6 +1042,7 @@
+             " mcr p14,0,r1,c4,c1,0\n"  /* enable interrupts */
+             : : : "r1");
+ }
++#endif
+ 
+ /* Internal ISR : run a few thousand times per second and calls 
+  * the queue manager dispatcher entry point.
+@@ -1086,6 +1088,7 @@
+ /* Internal ISR : run a few thousand times per second and calls 
+  * the ethernet entry point.
+  */
++#if 0 /* UNUSED - used for polling */
+ static irqreturn_t dev_poll_os_isr(int irg, void *dev_id, struct pt_regs *regs)
+ {
+     int qlevel = __get_cpu_var(softnet_data).input_pkt_queue.qlen;
+@@ -1127,8 +1130,10 @@
+     ixEthTxFrameDoneQMCallback(0,0);
+     return IRQ_HANDLED;
+ }
++#endif
+ 
+ /* initialize the PMU timer */
++#if 0 /* UNUSED - used for polling */
+ static int dev_pmu_timer_init(void)
+ {
+     UINT32 controlRegisterMask =
+@@ -1164,6 +1169,7 @@
+     
+     return 0;
+ }
++#endif
+ 
+ /* stops the timer when the module terminates */
+ static void dev_pmu_timer_disable(void)
+@@ -1636,6 +1636,7 @@
+     return 0;
+ }
+ 
++#if 0 /* UNUSED - used for polling */
+ /* The QMgr dispatch entry point can be called from the 
+  * IXP425_INT_LVL_QM1 irq (which will trigger
+  * an interrupt for every packet) or a timer (which will
+@@ -1686,7 +1687,7 @@
+      */
+     if (request_irq(IXP425_INT_LVL_QM1,
+                     dev_qmgr_os_isr,
+-                    SA_SHIRQ,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
+                     DRV_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+@@ -1710,6 +1711,7 @@
+   }
+   return 0;
+ }
++#endif
+ 
+ /* Enable the MAC port.
+  * Called on do_dev_open, dev_tx_timeout and mtu size changes
+@@ -2234,7 +2236,7 @@
+      */
+     if (request_irq(IXP425_INT_LVL_QM1,
+                     dev_qmgr_os_isr,
+-                    SA_SHIRQ,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
+                     DRV_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+@@ -2669,6 +2671,10 @@
+ 
+     TRACE;
+ 
++#if 0 /* DISABLE polling */
++    /* Enable Interrupt driven driver
++     * see http://www.nslu2-linux.org/wiki/OpenSlug/StabilizeEthernetDriver
++     */
+     if (no_csr_init == 0) /* module parameter */
+     {
+       /* The QMgr dispatch entry point is called from the IXP425_INT_LVL_QM1 irq
+@@ -2681,6 +2687,7 @@
+            return res;
+ 	}
+     }
++#endif
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/files/ixp400_pollcontroller.patch b/recipes/ixp425-eth/files/ixp400_pollcontroller.patch
new file mode 100644
index 0000000000..b6fe10a5c6
--- /dev/null
+++ b/recipes/ixp425-eth/files/ixp400_pollcontroller.patch
@@ -0,0 +1,50 @@
+*** ixp400-eth-1.4-r4/ixp400_eth.c.orig	Mon Oct 31 22:45:46 2005
+--- ixp400-eth-1.4-r4/ixp400_eth.c	Mon Oct 31 22:47:48 2005
+***************
+*** 306,311 ****
+--- 306,316 ----
+  ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
+  extern void 
+  ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
++ #ifdef CONFIG_NET_POLL_CONTROLLER
++ /* poll controller (needed for netconsole et al) */
++ static void
++ ixp425eth_poll_controller(struct net_device *dev);
++ #endif
+  
+  /* Private device data */
+  typedef struct {
+***************
+*** 3082,3087 ****
+--- 3087,3095 ----
+      ndev->get_stats = dev_get_stats;
+      ndev->set_multicast_list = dev_set_multicast_list;
+      ndev->flags |= IFF_MULTICAST;
++ #ifdef CONFIG_NET_POLL_CONTROLLER
++     ndev->poll_controller = ixp425eth_poll_controller;
++ #endif
+  #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+      ndev->set_mac_address = dev_set_mac_address;
+  #else
+***************
+*** 3172,3177 ****
+--- 3180,3198 ----
+      return res;
+  }
+  
++ #ifdef CONFIG_NET_POLL_CONTROLLER
++ /*
++  * Polling receive - used by netconsole and other diagnostic tools
++  * to allow network i/o with interrupts disabled.
++  * (stolen from 8139too.c by siddy)
++  */
++ static void ixp425eth_poll_controller(struct net_device *dev)
++ {
++         disable_irq(dev->irq);
++         dev_qmgr_os_isr(dev->irq, dev, NULL);
++         enable_irq(dev->irq);
++ }
++ #endif
+  
+  static int __devinit npe_eth_init_device(struct device *dev)
+  {
diff --git a/recipes/ixp425-eth/files/makefile.patch b/recipes/ixp425-eth/files/makefile.patch
new file mode 100644
index 0000000000..2e47972995
--- /dev/null
+++ b/recipes/ixp425-eth/files/makefile.patch
@@ -0,0 +1,18 @@
+
+#
+# Patch managed by http://www.holgerschurig.de/patcher.html
+#
+
+--- /dev/null
++++ ixp425-eth-1.1-r0/Makefile
+@@ -0,0 +1,10 @@
++ifneq ($(KERNELRELEASE),)
++obj-m	:= ixp425_eth.o
++
++else
++KDIR	:= /lib/modules/$(shell uname -r)/build
++PWD	:= $(shell pwd)
++
++default modules:
++	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
++endif
diff --git a/recipes/ixp425-eth/files/mm4.patch b/recipes/ixp425-eth/files/mm4.patch
new file mode 100644
index 0000000000..c40aaca998
--- /dev/null
+++ b/recipes/ixp425-eth/files/mm4.patch
@@ -0,0 +1,19 @@
+# This corrects the type of dev_set_mac_address.  The definition (prototype)
+# was *added* to include/linux/netdevice.h in the 2.6.11 mm patches, so the
+# change should not harm older builds
+--- ixp425-eth-1.1-r1/ixp425_eth.c.pre-mm4	2005-03-19 14:02:32.883601440 -0800
++++ ixp425-eth-1.1-r1/ixp425_eth.c	2005-03-19 14:03:25.849549392 -0800
+@@ -2347,12 +2347,11 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
+-int dev_set_mac_address(struct net_device *dev, void *addr)
++int dev_set_mac_address(struct net_device *dev, struct sockaddr *saddr)
+ {
+     int res;
+     priv_data_t *priv = dev->priv;
+     IxEthAccMacAddr npeMacAddr;
+-    struct sockaddr *saddr = (struct sockaddr *)addr;
+ 
+     /* Set MAC addr in h/w */
+     memcpy(&npeMacAddr.macAddress,
diff --git a/recipes/ixp425-eth/files/modprobe.conf b/recipes/ixp425-eth/files/modprobe.conf
new file mode 100644
index 0000000000..bfcbf916cf
--- /dev/null
+++ b/recipes/ixp425-eth/files/modprobe.conf
@@ -0,0 +1,3 @@
+# Add an alias for eth0 to ixp425_eth to cause the S40networking
+# init script to load the ixp425_eth driver on the first boot
+alias eth0 ixp425_eth
diff --git a/recipes/ixp425-eth/files/pollcontroller.patch b/recipes/ixp425-eth/files/pollcontroller.patch
new file mode 100644
index 0000000000..f95db28977
--- /dev/null
+++ b/recipes/ixp425-eth/files/pollcontroller.patch
@@ -0,0 +1,50 @@
+# Add a poll controller to the interface - required for netconsole
+--- ixp425-eth-1.1-r1/ixp425_eth.c.pre-pollcontroller	2005-03-19 14:02:32.883601440 -0800
++++ ixp425-eth-1.1-r1/ixp425_eth.c	2005-03-19 14:03:25.849549392 -0800
+@@ -273,6 +273,11 @@
+ extern void
+ ixEthTxFrameDoneQMCallback(IxQMgrQId? qId, IxQMgrCallbackId? callbackId);
+
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/* poll controller (needed for netconsole et al) */
++static void ixp425eth_poll_controller(struct net_device *dev);
++#endif
++
+ /* Private device data */
+ typedef struct {
+     unsigned int msdu_size;
+@@ -2462,6 +2467,10 @@
+     ndev->set_multicast_list = dev_set_multicast_list;
+     ndev->flags |= IFF_MULTICAST;
+
++#ifdef CONFIG_NET_POLL_CONTROLLER
++    ndev->poll_controller = ixp425eth_poll_controller;
++#endif
++
+     ndev->set_mac_address = dev_set_mac_address;
+
+     memcpy(ndev->dev_addr, &default_mac_addr[priv->port_id].macAddress,
+@@ -2491,6 +2500,23 @@
+     return res;
+ }
+
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling receive - used by netconsole and other diagnostic tools
++ * to allow network i/o with interrupts disabled.
++ * (stolen from 8139too.c by siddy)
++ */
++static void ixp425eth_poll_controller(struct net_device *dev)
++{
++        disable_irq(dev->irq);
++        dev_qmgr_os_isr(dev->irq, dev, NULL);
++        enable_irq(dev->irq);
++}
++#endif
++
++
++
+ static int __devinit npe_eth_init_device(struct device *dev)
+ {
+     int res = -ENOMEM;
diff --git a/recipes/ixp425-eth/ixp400-eth-1.4/2.6.13.patch b/recipes/ixp425-eth/ixp400-eth-1.4/2.6.13.patch
new file mode 100644
index 0000000000..376bb3b03b
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.4/2.6.13.patch
@@ -0,0 +1,39 @@
+--- ./ixp400_eth.c.orig	2005-10-02 18:55:03.998477844 -0700
++++ ./ixp400_eth.c	2005-10-02 19:00:43.187821684 -0700
+@@ -848,7 +848,9 @@
+ 	skb->pkt_type = PACKET_HOST;    /* Default type */
+         skb->ip_summed = 0;
+         skb->priority = 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+         skb->security = 0;
++#endif
+ #ifdef CONFIG_NET_SCHED
+ 	skb->tc_index = 0;
+ #endif
+@@ -2922,8 +2924,14 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+ int dev_set_mac_address(struct net_device *dev, struct sockaddr *saddr)
+ {
++#else
++static int set_mac_address(struct net_device *dev, void *saddrIn)
++{
++    struct sockaddr *saddr = saddrIn;
++#endif
+     int res;
+     priv_data_t *priv = dev->priv;
+     IxEthAccMacAddr npeMacAddr;
+@@ -3073,7 +3081,11 @@
+     ndev->get_stats = dev_get_stats;
+     ndev->set_multicast_list = dev_set_multicast_list;
+     ndev->flags |= IFF_MULTICAST;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+     ndev->set_mac_address = dev_set_mac_address;
++#else
++    ndev->set_mac_address = set_mac_address;
++#endif
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.4/2.6.14-mm.patch b/recipes/ixp425-eth/ixp400-eth-1.4/2.6.14-mm.patch
new file mode 100644
index 0000000000..b2dfaaa4fe
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.4/2.6.14-mm.patch
@@ -0,0 +1,44 @@
+--- ./ixp400_eth.c.orig	2005-11-13 16:17:57.943717806 -0800
++++ ./ixp400_eth.c	2005-11-13 16:29:00.829430574 -0800
+@@ -65,6 +65,10 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ 
++#ifndef to_platform_device
++#include <linux/platform_device.h>
++#endif
++
+ /*
+  * Intel IXP400 Software specific header files
+  */
+@@ -2410,7 +2414,7 @@ dev_tx_timeout_work(void* arg)
+ }
+ 
+ 
+-
++#if 0
+ static void
+ dev_tx_timeout_task(void *dev_id)
+ {
+@@ -2444,6 +2448,7 @@ dev_tx_timeout_task(void *dev_id)
+ 
+     up(maintenance_mutex);
+ }
++#endif
+ 
+ 
+ /* This function is called when kernel thinks that TX is stuck */
+@@ -3274,9 +3279,12 @@ static struct net_device ixp400_devices[
+ 
+ int init_module(void)
+ {
+-    int res, dev_count;
++    int res;
++#if 0
++    int dev_count;
+     IxEthAccPortId portId;
+     struct net_device *dev;
++#endif
+     int i;
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.4/2.6.14.patch b/recipes/ixp425-eth/ixp400-eth-1.4/2.6.14.patch
new file mode 100644
index 0000000000..c4c19db795
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.4/2.6.14.patch
@@ -0,0 +1,24 @@
+--- ./ixp400_eth.c	2005-10-01 00:50:45.179775259 -0700
++++ ./ixp400_eth.c	2005-10-01 00:54:10.976725245 -0700
+@@ -777,7 +777,9 @@
+ 	 * before re-using it on the Rx-path
+ 	 */
+         skb->nfmark = 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+ 	skb->nfcache = 0;
++#endif
+         nf_conntrack_put(skb->nfct);
+         skb->nfct = NULL;
+ #ifdef CONFIG_NETFILTER_DEBUG
+@@ -1451,7 +1453,11 @@
+     skb->len -= header_len;
+    
+     /* fill the pkt arrival time (set at the irq callback entry) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+     skb->stamp = irq_stamp;
++#else
++    skb_set_timestamp(skb, &irq_stamp);
++#endif
+  
+     /* fill the input device field */
+     skb->dev = dev;
diff --git a/recipes/ixp425-eth/ixp400-eth-1.4/ixp400-le-be.patch b/recipes/ixp425-eth/ixp400-eth-1.4/ixp400-le-be.patch
new file mode 100644
index 0000000000..87d4337eb3
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.4/ixp400-le-be.patch
@@ -0,0 +1,948 @@
+--- ./.pc/ixp400-le-be.patch/ixp400_eth.c	2005-04-19 22:58:18.000000000 -0700
++++ ./ixp400_eth.c	2005-10-23 23:29:06.760778566 -0700
+@@ -57,6 +57,7 @@
+ #include <linux/mii.h>
+ #include <linux/socket.h>
+ #include <linux/cache.h>
++#include <linux/interrupt.h>
+ #include <asm/io.h>
+ #include <asm/errno.h>
+ #include <net/pkt_sched.h>
+@@ -95,7 +96,7 @@
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Intel Corporation");
+ #define MODULE_NAME "ixp400_eth"
+-#define MODULE_VERSION "1.4"
++#define MODULE_VERSION_IXP400_ETH "1.4B"
+ 
+ /* Module parameters */
+ static int npe_learning = 1;      /* default : NPE learning & filtering enable */
+@@ -358,8 +359,13 @@
+     /* Used to stop the kernel thread for link monitoring. */
+     volatile BOOL maintenanceCheckStopped;
+ 
++  struct work_struct mii_job;
++
++
+     /* used for tx timeout */
+-    struct tq_struct tq_timeout;
++  struct work_struct tx_timeout_job;
++ 
++     
+ 
+     /* used to control the message output */
+     UINT32 devFlags;
+@@ -557,6 +563,8 @@
+ #endif
+ };
+ 
++static struct workqueue_struct *npe_eth_workqueue;
++
+ /* Mutex lock used to coordinate access to IxEthAcc functions
+  * which manipulate the MII registers on the PHYs
+  */
+@@ -565,6 +573,11 @@
+ /* mutex locked when maintenance is being performed */
+ static struct semaphore *maintenance_mutex;
+ 
++/* Flags which is set when corresponding NPE is running,
++ * cleared when NPE is stopped
++ */
++static int npeRunning[IX_ETH_ACC_NUMBER_OF_PORTS];
++
+ /* Flags which is set when the corresponding IRQ is running,
+  */
+ static int irq_pmu_used = 0;
+@@ -1070,6 +1083,117 @@
+     return 0;
+ }
+ 
++/* 
++ * WORKQUEUE JOBS
++ */
++
++/* This workqueue job will check the PHY for the link duplex and
++ * update the MAC accordingly. It also executes some buffer
++ * maintenance to release mbuf in excess or replenish after
++ * a severe starvation
++ *
++ * This function loops and wake up every 3 seconds.
++ */
++static void dev_media_check_work(void* arg)
++{
++    struct net_device *dev = (struct net_device *) arg;
++    priv_data_t *priv = dev->priv;
++
++    TRACE;
++	
++    /*
++     * Determine the link status
++     */
++
++    if (default_phy_cfg[priv->port_id].linkMonitor)
++    {
++        int linkUp;
++        int speed100;
++        int fullDuplex = -1; /* unknown duplex mode */
++        int newDuplex;
++        int autonegotiate;
++        unsigned phyNum = phyAddresses[priv->port_id];
++        int res;
++
++        TRACE;
++
++        /* lock the MII register access mutex */
++        down(miiAccessMutex);
++	    
++        res = ixEthMiiLinkStatus(phyNum,
++                                 &linkUp,
++                                 &speed100,
++                                 &newDuplex, 
++                                 &autonegotiate);
++        /* release the MII register access mutex */
++        up(miiAccessMutex);
++	    
++        if (res != IX_ETH_ACC_SUCCESS)
++        {
++            P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
++                   "\tCan't determine\nthe auto negotiated parameters. "
++                   "Using default values.\n",
++                   phyNum); 
++		
++            /* this shouldn't happen. exit the thread if it does */
++            goto out;
++        }
++	    
++        if (linkUp)
++        {
++            if (! netif_carrier_ok(dev))
++            {
++                /* inform the kernel of a change in link state */
++                netif_carrier_on(dev);
++            }
++
++            /*
++             * Update the MAC mode to match the PHY mode if 
++             * there is a phy mode change.
++             */
++            if (newDuplex != fullDuplex)
++            {
++                fullDuplex = newDuplex;
++                if (fullDuplex)
++                {
++                    ixEthAccPortDuplexModeSet(priv->port_id,
++                                              IX_ETH_ACC_FULL_DUPLEX);
++                }
++                else
++                {
++                    ixEthAccPortDuplexModeSet(priv->port_id,
++                                              IX_ETH_ACC_HALF_DUPLEX);
++                }
++            }
++        }
++        else
++        {
++            fullDuplex = -1;
++            if (netif_carrier_ok(dev))
++            {
++                /* inform the kernel of a change in link state */
++                netif_carrier_off(dev);
++            }
++        }
++    }
++    
++    TRACE;
++    
++    /* this is to prevent the rx pool from emptying when
++     * there's not enough memory for a long time
++     * It prevents also from holding the memory for too
++     * long
++     */
++    dev_buff_maintenance(dev);
++    
++    /* reschedule to run in 3 seconds */
++    queue_delayed_work(npe_eth_workqueue, &priv->mii_job, 3*HZ);
++ out:
++    return;
++}
++
++
++#define sigmask_lock sighand->siglock
+ 
+ /* 
+  * KERNEL THREADS
+@@ -1122,11 +1246,11 @@
+     */
+     down (priv->maintenanceCheckThreadComplete);
+ 
+-    daemonize();
+-    reparent_to_init();
++    daemonize("dev_media");
++    //    reparent_to_init();
+     spin_lock_irq(&current->sigmask_lock);
+     sigemptyset(&current->blocked);
+-    recalc_sigpending(current);
++    recalc_sigpending();
+     spin_unlock_irq(&current->sigmask_lock);
+     
+     snprintf(current->comm, sizeof(current->comm), "ixp400 %s", dev->name);
+@@ -1285,7 +1409,7 @@
+ static void dev_pmu_timer_restart(void)
+ {
+     unsigned long flags;
+-    save_flags_cli(flags);
++    local_irq_save(flags);
+      __asm__(" mcr p14,0,%0,c1,c1,0\n"  /* write current counter */
+             : : "r" (timer_countup_ticks));
+ 
+@@ -1294,13 +1418,13 @@
+             " mcr p14,0,r1,c5,c1,0; "  /* clear overflow */
+             " mcr p14,0,r1,c4,c1,0\n"  /* enable interrupts */
+             : : : "r1");
+-    restore_flags(flags);
++    local_irq_restore(flags);
+ }
+ 
+ /* Internal ISR : run a few thousand times per second and calls 
+  * the queue manager dispatcher entry point.
+  */
+-static void dev_qmgr_os_isr(int irg, void *dev_id, struct pt_regs *regs)
++static irqreturn_t dev_qmgr_os_isr(int irg, void *dev_id, struct pt_regs *regs)
+ {
+     /* get the time of this interrupt : all buffers received during this
+      * interrupt will be assigned the same time */
+@@ -1308,22 +1432,32 @@
+ 
+     /* call the queue manager entry point */
+     dispatcherFunc(IX_QMGR_QUELOW_GROUP);
++    return IRQ_HANDLED;
+ }
+ 
+ /* Internal ISR : run a few thousand times per second and calls 
+  * the ethernet entry point.
+  */
+-static void dev_poll_os_isr(int irg, void *dev_id, struct pt_regs *regs)
++int icount = 2;
++static irqreturn_t dev_poll_os_isr(int irg, void *dev_id, struct pt_regs *regs)
+ {
+-    dev_pmu_timer_restart(); /* set up the timer for the next interrupt */
++  if (icount > 0) {
++    icount--;
++    TRACE;
++  }
+ 
+     /* get the time of this interrupt : all buffers received during this
+      * interrupt will be assigned the same time */
+     do_gettimeofday(&irq_stamp);
+-
++  if (icount) TRACE;
+     ixEthRxFrameQMCallback(rx_queue_id,0);
++  if (icount) TRACE;
+     ixEthTxFrameDoneQMCallback(0,0);
+-   
++  if (icount) TRACE;
++    /* here surely */
++  dev_pmu_timer_restart(); /* set up the timer for the next interrupt */
++  return IRQ_HANDLED;
++
+ }
+ 
+ /* initialize the PMU timer */
+@@ -1370,17 +1504,18 @@
+ static void dev_pmu_timer_disable(void)
+ {
+     unsigned long flags;
+-    save_flags_cli(flags);
++    local_irq_save(flags);
+     __asm__(" mrc p14,0,r1,c4,c1,0; "  /* get int enable register */
+             " and r1,r1,#0x1e; "
+             " mcr p14,0,r1,c4,c1,0\n"  /* disable interrupts */
+             : : : "r1");
+-    restore_flags(flags);
++    local_irq_restore(flags);
+ }
+ 
+ /* This timer will call ixEthDBDatabaseMaintenance every
+  * IX_ETH_DB_MAINTENANCE_TIME jiffies
+  */
++#if 0
+ static void maintenance_timer_cb(unsigned long data);
+ 
+ static struct timer_list maintenance_timer = {
+@@ -1418,6 +1553,34 @@
+ 
+     maintenance_timer_set();
+ }
++#endif
++static void db_maintenance_code(void *data);
++static DECLARE_WORK(db_maintenance_job, db_maintenance_code, NULL);
++
++static inline
++void schedule_db_maintenance(void)
++{
++  TRACE;
++    queue_delayed_work(npe_eth_workqueue, &db_maintenance_job,
++                       DB_MAINTENANCE_TIME);
++}
++
++static inline
++void cancel_db_maintenance(void)
++{
++  TRACE;
++    cancel_delayed_work(&db_maintenance_job);
++}
++
++static void db_maintenance_code(void *data)
++{
++  TRACE;
++    down(maintenance_mutex);
++    ixEthDBDatabaseMaintenance();
++    up(maintenance_mutex);
++    schedule_db_maintenance();
++}
++
+ 
+ /*
+  *  DATAPLANE
+@@ -1531,7 +1694,7 @@
+ 	 * and its constants are taken from the eth_type_trans()
+ 	 * function.
+ 	 */
+-	struct ethhdr *eth = skb->mac.ethernet;
++	struct ethhdr *eth = eth_hdr(skb);
+ 	unsigned short hproto = ntohs(eth->h_proto);
+ 	
+ 	if (hproto >= 1536)
+@@ -1573,7 +1736,7 @@
+ 	     * mode is set This costs
+ 	     * a lookup inside the packet payload.
+ 	     */
+-	    struct ethhdr *eth = skb->mac.ethernet;
++	    struct ethhdr *eth = eth_hdr(skb);
+ 	    unsigned char *hdest = eth->h_dest;
+ 	    
+ 	    if (memcmp(hdest, dev->dev_addr, ETH_ALEN)!=0)
+@@ -1632,7 +1795,7 @@
+     dev = (struct net_device *)callbackTag;
+     priv = dev->priv;
+ 
+-    qlevel = softnet_data[0].input_pkt_queue.qlen;
++    qlevel = __get_cpu_var(softnet_data).input_pkt_queue.qlen;
+     /* check if the system accepts more traffic and
+      * against chained mbufs 
+      */
+@@ -1674,10 +1837,21 @@
+ 	/* set the length of the received skb from the mbuf length  */
+ 	skb->tail = skb->data + len;
+ 	skb->len = len;
++
++#ifndef __ARMEB__
++	{
++	    /* Byte swap all words containing data from the buffer. */
++	    unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	    unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	    while (p < e)
++		*p = ntohl(*p), ++p;
++	}
++#endif
+ 	
+ #ifdef DEBUG_DUMP
+ 	skb_dump("rx", skb);
+ #endif
++
+ 	/* Set the skb protocol and set mcast/bcast flags */
+ 	dev_eth_type_trans(mcastFlags, skb, dev);
+ 
+@@ -1821,6 +1995,39 @@
+ 	spin_unlock_irq(&priv->lock);
+ }
+ 
++/* start the NPEs */
++static int npe_start(IxEthAccPortId port_id)
++{
++    int res;
++    UINT32 npeImageId;
++
++    switch (port_id)
++    {
++        case IX_ETH_PORT_1:
++	    npeImageId = IX_ETH_NPE_B_IMAGE_ID;
++	    break;
++        case IX_ETH_PORT_2:
++	    npeImageId = IX_ETH_NPE_C_IMAGE_ID;
++	    break;
++	default:
++	    P_ERROR("Invalid port specified. IXP Ethernet NPE not started\n");
++	    return -ENODEV;
++    }
++
++    /* Initialise and Start NPEs */
++    if ((res = ixNpeDlNpeInitAndStart(npeImageId)))
++    {
++	P_ERROR("Error starting NPE for Ethernet port %d!\n", port_id);
++	return -1;
++    }
++
++    /* set this flag to indicate that NPE is running */
++    npeRunning[port_id] = 1;
++
++    return 0;
++}
++
++
+ /* The QMgr dispatch entry point can be called from the 
+  * IX_OSAL_IXP400_QM1_IRQ_LVL irq (which will trigger
+  * an interrupt for every packet) or a timer (which will
+@@ -1906,7 +2113,16 @@
+     IxEthAccMacAddr npeMacAddr;
+     priv_data_t *priv = dev->priv;
+ 
+-    P_DEBUG("port_enable(%s)\n", dev->name);
++    P_DEBUG("port_enable(%s) %d\n", dev->name, priv->port_id);
++
++    if (!npeRunning[priv->port_id])
++    {
++        if ((res = npe_start(priv->port_id)))
++        {
++            TRACE;
++            return res;
++        }
++    }
+ 
+     /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */
+     memcpy(&npeMacAddr.macAddress,
+@@ -2085,6 +2301,16 @@
+ 	return 0;
+     }
+ 
++#ifndef __ARMEB__
++    {
++	/* Byte swap all words containing data from the buffer. */
++	unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	while (p < e)
++	    *p = ntohl(*p), ++p;
++    }
++#endif
++
+ #ifdef DEBUG_DUMP
+     skb_dump("tx", skb);
+ #endif
+@@ -2120,6 +2346,7 @@
+ static int do_dev_open(struct net_device *dev)
+ {
+     int res;
++    TRACE;
+ 
+     /* prevent the maintenance task from running while bringing up port */
+     down(maintenance_mutex);
+@@ -2151,6 +2378,27 @@
+ }
+ 
+ static void
++dev_tx_timeout_work(void* arg)
++{
++    struct net_device *dev = (struct net_device *)arg;
++    priv_data_t *priv = dev->priv;
++
++    P_ERROR("%s: Tx Timeout for port %d\n", dev->name, priv->port_id);
++
++    down(maintenance_mutex);
++    port_disable(dev);
++
++    /* Note to user: Consider performing other reset operations here (such as
++     * PHY reset), if it is known to help the Tx Flow to become "unstuck"
++     */
++
++    port_enable(dev);
++    up(maintenance_mutex);
++}
++
++
++
++static void
+ dev_tx_timeout_task(void *dev_id)
+ {
+     struct net_device *dev = (struct net_device *)dev_id;
+@@ -2191,7 +2439,7 @@
+     priv_data_t *priv = dev->priv;
+ 
+     TRACE;
+-    schedule_task(&priv->tq_timeout);
++    queue_work(npe_eth_workqueue, &priv->tx_timeout_job);
+     
+ }
+ 
+@@ -2352,7 +2600,8 @@
+ 
+     TRACE;
+ 
+-    invalidate_dcache_range((unsigned int)&ethStats, sizeof(ethStats));
++    //    invalidate_dcache_range((unsigned int)&ethStats, sizeof(ethStats));
++    IX_ACC_DATA_CACHE_INVALIDATE((unsigned int)&ethStats, sizeof(ethStats));
+     if ((res = ixEthAccMibIIStatsGetClear(priv->port_id, &ethStats)))
+     {
+ 	P_ERROR("%s: ixEthAccMibIIStatsGet failed for port %d, res = %d\n",
+@@ -2565,7 +2814,6 @@
+     miiAccessMutex = (struct semaphore *) kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+     if (!miiAccessMutex)
+ 	return -ENOMEM;
+-
+     init_MUTEX(miiAccessMutex);
+ 
+     TRACE;
+@@ -2673,12 +2921,12 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
+-int dev_set_mac_address(struct net_device *dev, void *addr)
++int dev_set_mac_address(struct net_device *dev, struct sockaddr *saddr)
+ {
+     int res;
+     priv_data_t *priv = dev->priv;
+     IxEthAccMacAddr npeMacAddr;
+-    struct sockaddr *saddr = (struct sockaddr *)addr;
++    //    struct sockaddr *saddr = (struct sockaddr *)addr;
+ 
+     /* Get MAC addr from parameter */
+     memcpy(&npeMacAddr.macAddress,
+@@ -2751,35 +2999,16 @@
+ /* Initialize device structs.
+  * Resource allocation is deffered until do_dev_open
+  */
+-static int __devinit dev_eth_probe(struct net_device *dev)
++static int __devinit dev_eth_probe(struct device *_dev)
+ {
+-    static int found_devices = 0;
+-    priv_data_t *priv;
++    int res = -ENOMEM;
++    struct platform_device *pdev = to_platform_device(_dev);
++    struct net_device *ndev = dev_get_drvdata(_dev);
++    priv_data_t *priv = (priv_data_t*)ndev->priv;
+ 
+     TRACE;
+ 
+-    /* there is a limited number of devices */
+-    if (found_devices >= dev_max_count) /* module parameter */
+-	return -ENODEV;
+-
+-    SET_MODULE_OWNER(dev);
+-
+-    /* set device name */
+-    sprintf(dev->name, DEVICE_NAME "%d", found_devices);
+-
+-    /* allocate and initialize priv struct */
+-    priv = dev->priv = kmalloc(sizeof(priv_data_t), GFP_KERNEL);
+-    if (dev->priv == NULL)
+-	return -ENOMEM;
+-
+-    memset(dev->priv, 0, sizeof(priv_data_t));
+-
+-    TRACE;
+-
+-    /* set the mapping between port ID and devices 
+-     * 
+-     */
+-    priv->port_id  = default_portId[found_devices];
++    priv->port_id = pdev->id;
+ 
+     TRACE;
+ 
+@@ -2789,9 +3018,8 @@
+     if(priv->rx_pool == NULL)
+     {
+ 	P_ERROR("%s: Buffer RX Pool init failed on port %d\n",
+-		dev->name, priv->port_id);
+-	kfree(dev->priv);
+-	return -ENOMEM;
++		ndev->name, priv->port_id);
++	goto out;
+     }
+ 
+     TRACE;
+@@ -2802,45 +3030,45 @@
+     if(priv->tx_pool == NULL)
+     {
+ 	P_ERROR("%s: Buffer TX Pool init failed on port %d\n",
+-		dev->name, priv->port_id);
+-	kfree(dev->priv);
+-	return -ENOMEM;
++		ndev->name, priv->port_id);
++	goto out;
+     }
+ 
+-     TRACE;
+-
+    /* initialise the MII register access mutex */
+     priv->maintenanceCheckThreadComplete = (struct semaphore *)
+ 	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+     if (!priv->maintenanceCheckThreadComplete)
+     {
+-	kfree(dev->priv);
+-	return -ENOMEM;
++	P_ERROR("%s: Failed to allocate maintenance semaphore %d\n",
++		ndev->name, priv->port_id);
++	goto out;
+     }
+     priv->lock = SPIN_LOCK_UNLOCKED;
+     init_MUTEX(priv->maintenanceCheckThreadComplete);
+     priv->maintenanceCheckStopped = TRUE;
+ 
+     /* initialize ethernet device (default handlers) */
+-    ether_setup(dev);
++    ether_setup(ndev);
+ 
+     TRACE;
+ 
+-     /* fill in dev struct callbacks with customized handlers */
+-    dev->open = do_dev_open;
+-    dev->stop = do_dev_stop;
++    INIT_WORK(&priv->mii_job, dev_media_check_work, ndev);
++    INIT_WORK(&priv->tx_timeout_job, dev_tx_timeout_work, ndev);
+ 
+-    dev->hard_start_xmit = dev_hard_start_xmit;
+-
+-    dev->watchdog_timeo = DEV_WATCHDOG_TIMEO;
+-    dev->tx_timeout = dev_tx_timeout;
+-    dev->change_mtu = dev_change_mtu;
+-    dev->do_ioctl = do_dev_ioctl;
+-    dev->get_stats = dev_get_stats;
+-    dev->set_multicast_list = dev_set_multicast_list;
+-    dev->flags |= IFF_MULTICAST;
++    TRACE;
+ 
+-    dev->set_mac_address = dev_set_mac_address;
++     /* fill in dev struct callbacks with customized handlers */
++    ndev->open = do_dev_open;
++    ndev->stop = do_dev_stop;
++    ndev->hard_start_xmit = dev_hard_start_xmit;
++    ndev->watchdog_timeo = DEV_WATCHDOG_TIMEO;
++    ndev->tx_timeout = dev_tx_timeout;
++    ndev->change_mtu = dev_change_mtu;
++    ndev->do_ioctl = do_dev_ioctl;
++    ndev->get_stats = dev_get_stats;
++    ndev->set_multicast_list = dev_set_multicast_list;
++    ndev->flags |= IFF_MULTICAST;
++    ndev->set_mac_address = dev_set_mac_address;
+ 
+     TRACE;
+ 
+@@ -2858,22 +3086,22 @@
+      *
+      */
+ 
+-    memcpy(dev->dev_addr, 
++    memcpy(ndev->dev_addr, 
+ 	   &default_mac_addr[priv->port_id].macAddress,
+ 	   IX_IEEE803_MAC_ADDRESS_SIZE);
+ 
+     /* possibly remove this test and the message when a valid MAC address 
+      * is not hardcoded in the driver source code. 
+      */
+-    if (is_valid_ether_addr(dev->dev_addr))
++    if (is_valid_ether_addr(ndev->dev_addr))
+     {
+ 	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
+-	       (unsigned)dev->dev_addr[0],
+-	       (unsigned)dev->dev_addr[1],
+-	       (unsigned)dev->dev_addr[2],
+-	       (unsigned)dev->dev_addr[3],
+-	       (unsigned)dev->dev_addr[4],
+-	       (unsigned)dev->dev_addr[5],
++	       (unsigned)ndev->dev_addr[0],
++	       (unsigned)ndev->dev_addr[1],
++	       (unsigned)ndev->dev_addr[2],
++	       (unsigned)ndev->dev_addr[3],
++	       (unsigned)ndev->dev_addr[4],
++	       (unsigned)ndev->dev_addr[5],
+ 	       priv->port_id);
+     }
+     
+@@ -2883,31 +3111,30 @@
+      */
+     TRACE;
+ 
+-    dev_change_msdu(dev, dev->mtu + dev->hard_header_len + VLAN_HDR);
+-
++    dev_change_msdu(ndev, ndev->mtu + ndev->hard_header_len + VLAN_HDR);
++#if 0
+     priv->tq_timeout.routine = dev_tx_timeout_task;
+     priv->tq_timeout.data = (void *)dev;
+-
++#endif
+ #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED
+     /* configure and enable a fast TX queuing discipline */
+     TRACE;
+ 
+-    priv->qdisc = qdisc_create_dflt(dev, &dev_qdisc_ops);
+-    dev->qdisc_sleeping = priv->qdisc;
+-    dev->qdisc = priv->qdisc;
++    priv->qdisc = qdisc_create_dflt(ndev, &dev_qdisc_ops);
++    ndev->qdisc_sleeping = priv->qdisc;
++    ndev->qdisc = priv->qdisc;
+     
+-    if (!dev->qdisc_sleeping)
++    if (!ndev->qdisc_sleeping)
+     {
+ 	P_ERROR("%s: qdisc_create_dflt failed on port %d\n",
+-		dev->name, priv->port_id);
+-	kfree(dev->priv);
+-	return -ENOMEM;
++		ndev->name, priv->port_id);
++	goto out;
+     }
+ #endif
+ 
+     /* set the internal maximum queueing capabilities */
+-    dev->tx_queue_len = TX_MBUF_POOL_SIZE;
+-
++    ndev->tx_queue_len = TX_MBUF_POOL_SIZE;
++#if 0
+     if (!netif_queue_stopped(dev))
+     {
+ 	TRACE;
+@@ -2917,9 +3144,63 @@
+     }
+ 
+     found_devices++;
++#endif
++    if ((res = register_netdev(ndev)))
++      P_ERROR("Failed to register netdev. res = %d\n", res);
+ 
+     TRACE;
+ 
++ out: 
++    return res;
++}
++
++
++static int __devinit npe_eth_init_device(struct device *dev)
++{
++    int res = -ENOMEM;
++    struct platform_device *pdev = to_platform_device(dev);
++    struct net_device *ndev = alloc_etherdev(sizeof(priv_data_t));
++    TRACE;
++    if (ndev == NULL) {
++        P_ERROR("could not allocate device.\n");
++        goto out;
++    }
++    SET_MODULE_OWNER(ndev);
++    SET_NETDEV_DEV(ndev, dev);
++    ixEthAccTxSchedulingDisciplineSet(pdev->id, FIFO_NO_PRIORITY);
++    dev_set_drvdata(dev, ndev);
++    res = dev_eth_probe(dev);
++    if (res == 0) {
++        /* This was added in v0.1.8 of the driver. It seems that we need to
++         * enable the port before the user can set a mac address for the port
++         * using 'ifconfig hw ether ...'. To enable the port we must first
++         * register Q callbacks, so we register the portDisable callbacks to
++         * ensure that no buffers are passed up to the kernel until the port is
++         * brought up properly (ifconfig up)
++         */
++        ixEthAccPortTxDoneCallbackRegister(pdev->id,
++                                           tx_done_disable_cb,
++                                           (UINT32)ndev);
++        ixEthAccPortRxCallbackRegister(pdev->id, 
++                                       rx_disable_cb, 
++                                       (UINT32)ndev);
++        port_enable(ndev);
++    } else {
++        dev_set_drvdata(dev, NULL);
++        kfree(ndev);
++    }
++out:
++    TRACE;
++    return res;
++}
++ 
++static int __devexit npe_eth_fini_device(struct device *dev)
++{
++    struct net_device *ndev = dev_get_drvdata(dev);
++    TRACE;
++    dev_set_drvdata(dev, NULL);
++    unregister_netdev(ndev);
++    kfree(ndev);
+     return 0;
+ }
+ 
+@@ -2928,6 +3209,28 @@
+ 
+ #ifdef MODULE
+ 
++#define MODULE_NAME "ixp400_eth"
++
++static struct device_driver npe_eth_driver = {
++    .name       = MODULE_NAME,
++    .bus        = &platform_bus_type,
++    .probe      = npe_eth_init_device,
++    .remove     = npe_eth_fini_device,
++};
++ 
++static struct platform_device npe_eth_devs[] = {
++    {
++        .name   = MODULE_NAME,
++        .id     = IX_ETH_PORT_1,
++    },
++    {
++        .name   = MODULE_NAME,
++        .id     = IX_ETH_PORT_2,
++    }
++};
++ 
++
++
+ static struct net_device ixp400_devices[IX_ETH_ACC_NUMBER_OF_PORTS];
+ 
+ int init_module(void)
+@@ -2935,11 +3238,11 @@
+     int res, dev_count;
+     IxEthAccPortId portId;
+     struct net_device *dev;
+-
++    int i;
+     TRACE;
+ 
+-    P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MODULE_VERSION " \n");
+-
++    P_INFO("Initializing IXP400 NPE Ethernet driver software v. LE  \n");
++    ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL);
+     TRACE;
+ 
+     /* check module parameter range */
+@@ -2951,6 +3254,16 @@
+ 
+     TRACE;
+ 
++    /* XXX do this very early */
++    /* initialise the DB Maintenance task mutex */
++    maintenance_mutex = (struct semaphore *) kmalloc(sizeof(struct semaphore), GFP_KERNEL);
++    if (!maintenance_mutex)
++	return -ENOMEM;
++
++    init_MUTEX(maintenance_mutex);
++
++    TRACE;
++
+ #ifndef DEBUG
+     /* check module parameter range */
+     if (log_level >= 2)  /* module parameter */
+@@ -3015,6 +3328,13 @@
+     /* Initialise the NPEs and access layer */
+     TRACE;
+ 
++    for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++)
++    {
++	if ((res = npe_start(i)))
++	    return res;
++        TRACE;
++    }
++
+     if ((res = ethacc_init()))
+ 	return res;
+ 
+@@ -3026,6 +3346,13 @@
+ 
+     TRACE;
+ 
++    npe_eth_workqueue = create_workqueue(MODULE_NAME);
++    if (npe_eth_workqueue == NULL)
++	return -ENOMEM;
++
++    TRACE;
++
++#if 0
+     /* Initialise the driver structure */
+     for (dev_count = 0; 
+ 	 dev_count < dev_max_count;  /* module parameter */
+@@ -3038,7 +3365,7 @@
+ 	dev->init = dev_eth_probe;
+ 
+         TRACE;
+-
++    }
+ 	if ((res = register_netdev(dev)))
+ 	{
+ 	    TRACE;
+@@ -3068,6 +3395,35 @@
+ 	    return convert_error_ethAcc(res);
+ 	}
+     }
++#endif
++    /* set the softirq rx queue thresholds 
++     * (These numbers are based on tuning experiments)
++     * maxbacklog =  (netdev_max_backlog * 10) / 63;
++    */
++    if (netdev_max_backlog == 0)
++    {
++	netdev_max_backlog = 290; /* system default */
++    }
++    netdev_max_backlog /= BACKLOG_TUNE;
++
++    TRACE;
++
++    res = driver_register(&npe_eth_driver);
++    if (res != 0) {
++        P_ERROR("Failed to register NPE EThernet driver (res = %d)\n", res);
++        return res;
++    }
++ 
++    res = platform_device_register(&npe_eth_devs[0]);
++    if (res != 0) {
++        P_ERROR("Failed to register NPE platform device 0 (res = %d)\n", res);
++        return res;
++    }
++    res = platform_device_register(&npe_eth_devs[1]);
++    if (res != 0) {
++        P_ERROR("Failed to register NPE platform device 1 (res = %d)\n", res);
++        return res;
++    }
+ 
+     TRACE;
+ 
+@@ -3104,33 +3460,13 @@
+     }
+ 
+     TRACE;
+-
+-    /* initialise the DB Maintenance task mutex */
+-    maintenance_mutex = (struct semaphore *) kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+-    if (!maintenance_mutex)
+-	return -ENOMEM;
+-
+-    init_MUTEX(maintenance_mutex);
+-
+-    TRACE;
+-
++TRACE;
+     /* Do not start the EthDB maintenance thread if learning & filtering feature is disabled */
+     if (npe_learning) /* module parameter */
+     {
+-        maintenance_timer_set();
+-    }
+-
+-    TRACE;
+-
+-    /* set the softirq rx queue thresholds 
+-     * (These numbers are based on tuning experiments)
+-     * maxbacklog =  (netdev_max_backlog * 10) / 63;
+-    */
+-    if (netdev_max_backlog == 0)
+-    {
+-	netdev_max_backlog = 290; /* system default */
++      schedule_db_maintenance();
++      //        maintenance_timer_set();
+     }
+-    netdev_max_backlog /= BACKLOG_TUNE;
+ 
+     TRACE;
+ 
+@@ -3175,7 +3511,8 @@
+     TRACE;
+ 
+     /* stop the maintenance timer */
+-    maintenance_timer_clear();
++    //    maintenance_timer_clear();
++    cancel_db_maintenance();
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.4/makefile.patch b/recipes/ixp425-eth/ixp400-eth-1.4/makefile.patch
new file mode 100644
index 0000000000..350485c1aa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.4/makefile.patch
@@ -0,0 +1,33 @@
+--- /dev/null	2005-09-06 00:17:15.000000000 -0700
++++ ./Makefile	2005-10-02 22:15:19.974595551 -0700
+@@ -0,0 +1,30 @@
++obj-m := ixp400_eth.o
++
++CFLAGS_ixp400_eth.o = -DWall \
++          -I$(IXP4XX_CSR_DIR) \
++          -I$(OSAL_DIR)/ \
++          -I$(OSAL_DIR)/os/linux/include/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/core/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/os/linux/include/core/  \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/os/linux/include/core/ \
++          -I$(OSAL_DIR)/include/ \
++          -I$(OSAL_DIR)/include/modules/ \
++          -I$(OSAL_DIR)/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/include/modules/core/ \
++          -I$(OSAL_DIR)/include/platforms/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/xp425/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425/ \
++	  $(IX_CFLAGS)
++
++default:
++	$(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) V=1 -C $(LINUX_SRC) SUBDIRS=$(PWD) modules
++
++clean:
++	rm -f ixp400_eth.ko
diff --git a/recipes/ixp425-eth/ixp400-eth-1.4/modprobe.conf b/recipes/ixp425-eth/ixp400-eth-1.4/modprobe.conf
new file mode 100644
index 0000000000..9d579eeac1
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.4/modprobe.conf
@@ -0,0 +1,3 @@
+# Add an alias for eth0 to ixp400_eth to cause the S40networking
+# init script to load the ixp400_eth driver on the first boot
+alias eth0 ixp400_eth
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch
new file mode 100644
index 0000000000..fb55f92868
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch
@@ -0,0 +1,28 @@
+ ixp400_eth.c |    6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletion(-)
+
+Index: ixp400-eth-1.5.1-r0/ixp400_eth.c
+===================================================================
+--- ixp400-eth-1.5.1-r0.orig/ixp400_eth.c
++++ ixp400-eth-1.5.1-r0/ixp400_eth.c
+@@ -1848,7 +1848,11 @@
+     skb->len -= header_len;
+    
+     /* fill the pkt arrival time (set at the irq callback entry) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+     skb->stamp = irq_stamp;
++#else
++    skb_set_timestamp(skb, &irq_stamp);
++#endif
+  
+     /* fill the input device field */
+     skb->dev = dev;
+@@ -3040,7 +3044,7 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
+-int ixp400_dev_set_mac_address(struct net_device *dev, void *addr)
++static int ixp400_dev_set_mac_address(struct net_device *dev, void *addr)
+ {
+     int res;
+     IxEthAccMacAddr npeMacAddr;
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch
new file mode 100644
index 0000000000..83115d8efa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch
@@ -0,0 +1,18 @@
+2.6.15 needs platform_device.h
+
+ ixp400_eth.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -65,6 +65,10 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ 
++#ifndef to_platform_device
++#include <linux/platform_device.h>
++#endif
++
+ /*
+  * Intel IXP400 Software specific header files
+  */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch
new file mode 100644
index 0000000000..3bc51f0b66
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch
@@ -0,0 +1,36 @@
+This is an OpenEmbedded only patch to make the code buildable in
+the OpenEmbedded environment.
+
+--- ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,30 @@
++obj-m := ixp400_eth.o
++
++CFLAGS_ixp400_eth.o = -DWall \
++          -I$(IXP4XX_CSR_DIR) \
++          -I$(OSAL_DIR)/ \
++          -I$(OSAL_DIR)/os/linux/include/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/core/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/os/linux/include/core/  \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/os/linux/include/core/ \
++          -I$(OSAL_DIR)/include/ \
++          -I$(OSAL_DIR)/include/modules/ \
++          -I$(OSAL_DIR)/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/include/modules/core/ \
++          -I$(OSAL_DIR)/include/platforms/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/xp425/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425/ \
++	  $(IX_CFLAGS)
++
++default:
++	$(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) $(KERNEL_VERBOSE) symverfile=$(IXP4XX_CSR_SYMVERS) -C $(LINUX_SRC) SUBDIRS=$(PWD) modules
++
++clean:
++	rm -f ixp400_eth.ko
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch
new file mode 100644
index 0000000000..8508790fa5
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch
@@ -0,0 +1,22 @@
+tries to go on even if queue manager initialization
+fails. this is hand because you'll be allowed to
+insert ixp400_eth immediately after you have removed
+it, without re-inserting ixp400.
+
+ ixp400_eth.c |    5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2850,10 +2850,7 @@ static int qmgr_init(void)
+     /* Initialise Queue Manager */
+     P_VERBOSE("Initialising Queue Manager...\n");
+     if ((res = ixQMgrInit()))
+-    {
+-	P_ERROR("Error initialising queue manager!\n");
+-	return -1;
+-    }
++	P_ERROR("Error initialising queue manager, trying to continue!\n");
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch
new file mode 100644
index 0000000000..c684c078d2
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch
@@ -0,0 +1,131 @@
+This patch is not necessary but helps when debugging the build
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1350,9 +1350,10 @@ static int dev_media_check_thread (void*
+ 	
+ 	    if (res != IX_ETH_ACC_SUCCESS)
+ 	    {
+-		P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
++		P_WARN("%s: ixEthMiiLinkStatus failed on PHY%d.\n"
+ 		       "\tCan't determine\nthe auto negotiated parameters. "
+ 		       "Using default values.\n",
++		       dev->name,
+ 		       phyNum); 
+ 		/* something is bad, gracefully stops the loop */
+ 		priv->maintenanceCheckStopped = TRUE;
+@@ -2213,7 +2214,8 @@ static int port_enable(struct net_device
+ 	   IX_IEEE803_MAC_ADDRESS_SIZE);
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -2707,8 +2709,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out)))
+ 	    {
+-		P_ERROR("Error reading MII reg %d on phy %d\n",
+-		       data->reg_num, data->phy_id);
++		P_ERROR("%s: Error reading MII reg %d on phy %d\n",
++		       dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -2720,8 +2722,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in)))
+ 	    {
+-		P_ERROR("Error writing MII reg %d on phy %d\n",
+-                        data->reg_num, data->phy_id);
++		P_ERROR("%s: Error writing MII reg %d on phy %d\n",
++                        dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -3049,7 +3051,8 @@ static int set_mac_address(struct net_de
+     /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -3267,6 +3270,8 @@ static int __devinit dev_eth_probe(struc
+ 	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+     if (!priv->maintenanceCheckThreadComplete)
+     {
++	P_ERROR("%s: Failed to allocate maintenance semaphore %d\n",
++		ndev->name, priv->port_id);
+ 	goto error;
+     }
+     priv->lock = SPIN_LOCK_UNLOCKED;
+@@ -3360,7 +3365,11 @@ static int __devinit dev_eth_probe(struc
+ 
+ #if IS_KERNEL26
+     if (register_netdev(ndev))
++    {
++	P_ERROR("%s: Failed to register netdevice %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
++    }
+ #else
+     found_devices++;
+ #endif /* IS_KERNEL26 */
+@@ -3370,6 +3379,8 @@ static int __devinit dev_eth_probe(struc
+     /* register EthAcc callbacks for this port */
+     if (dev_rxtxcallback_register(portId, (UINT32)ndev))
+     {
++    	P_ERROR("%s: Failed to register callback %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
+     }
+ 
+@@ -3393,6 +3404,7 @@ static int __devinit dev_eth_probe(struc
+ 
+ /* Error handling: enter here whenever error detected */
+ error:
++    P_ERROR("%s: dev_eth_probe fails\n", ndev->name);
+     TRACE;
+ 
+ #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED
+@@ -3465,21 +3477,21 @@ static int __devexit dev_eth_remove(int 
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEA))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 
+@@ -3528,6 +3540,9 @@ static int __init ixp400_eth_init(void)
+     TRACE;
+ 
+     P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n");
++#ifdef IX_OSAL_ENSURE_ON
++    ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL);
++#endif
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/device-name.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/device-name.patch
new file mode 100644
index 0000000000..492c9274fd
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/device-name.patch
@@ -0,0 +1,49 @@
+ register the ethernet devices as ethX
+
+ ixp400_eth.c |   12 +++---------
+ 1 files changed, 3 insertions(+), 9 deletions(-)
+
+Index: ixp400-eth-1.5.1-r0/ixp400_eth.c
+===================================================================
+--- ixp400-eth-1.5.1-r0.orig/ixp400_eth.c
++++ ixp400-eth-1.5.1-r0/ixp400_eth.c
+@@ -160,9 +160,6 @@
+ MODULE_PARM(dev_max_count, "i");
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+-/* devices will be called ixp0 and ixp1 */
+-#define DEVICE_NAME "ixp"
+-
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
+ #define PHY_SPEED_10    0
+ #define PHY_SPEED_100   1
+@@ -1579,7 +1576,7 @@
+     if (request_irq(IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL,
+                     dev_pmu_timer_os_isr,
+                     SA_SHIRQ,
+-                    DEVICE_NAME,
++                    MODULE_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+         P_ERROR("Failed to reassign irq to PMU timer interrupt!\n");
+@@ -3035,8 +3032,8 @@
+ 	if (port_id == IX_ETH_PORT_2) npe_id = "C";
+ 	if (port_id == IX_ETH_PORT_3) npe_id = "A";
+ 
+-	P_INFO("%s%d is using NPE%s and the PHY at address %d\n",
+-	       DEVICE_NAME, port_id, npe_id, phyAddresses[port_id]);
++	P_INFO("ethernet %d is using NPE%s and the PHY at address %d\n",
++	       dev_count, npe_id, phyAddresses[port_id]);
+ 
+ 	/* Set the MAC to the same duplex mode as the phy */
+ 	ixEthAccPortDuplexModeSet(port_id,
+@@ -3244,9 +3241,6 @@
+     /* set the private port ID */
+     priv->port_id  = portId;
+ 
+-    /* set device name */
+-    sprintf(ndev->name, DEVICE_NAME"%d", priv->port_id);
+-
+     TRACE;
+ 
+     /* initialize RX pool */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/int-random.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/int-random.patch
new file mode 100644
index 0000000000..fede9daf90
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/int-random.patch
@@ -0,0 +1,16 @@
+use the ethernet device interrupts to gather entropy
+
+ ixp400_eth.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2864,7 +2864,7 @@ static int qmgr_init(void)
+ 
+     if (request_irq(IX_OSAL_IXP400_QM1_IRQ_LVL,
+                     dev_qmgr_os_isr,
+-                    SA_SHIRQ,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
+                     MODULE_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/le.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/le.patch
new file mode 100644
index 0000000000..3d569015e6
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/le.patch
@@ -0,0 +1,41 @@
+little endian support
+
+ ixp400_eth.c |   20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2040,6 +2040,16 @@ static void rx_cb(UINT32 callbackTag, IX
+ 	skb->tail = skb->data + len;
+ 	skb->len = len;
+ 	
++#ifndef __ARMEB__
++	{
++	    /* Byte swap all words containing data from the buffer. */
++	    unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	    unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	    while (p < e)
++		*p = ntohl(*p), ++p;
++	}
++#endif
++
+ #ifdef DEBUG_DUMP
+ 	skb_dump("rx", skb);
+ #endif
+@@ -2431,6 +2441,16 @@ static int dev_hard_start_xmit(struct sk
+ 	return 0;
+     }
+ 
++#ifndef __ARMEB__
++    {
++	/* Byte swap all words containing data from the buffer. */
++	unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	while (p < e)
++	    *p = ntohl(*p), ++p;
++    }
++#endif
++
+ #ifdef DEBUG_DUMP
+     skb_dump("tx", skb);
+ #endif
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch
new file mode 100644
index 0000000000..e23eaf5f2b
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch
@@ -0,0 +1,123 @@
+Patch to use maclist - get the MAC to use from the board level
+MAC repository based on the device portId.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -23,10 +23,10 @@
+  * This driver is written and optimized for Intel Xscale technology.
+  *
+  * SETUP NOTES:
+- * By default, this driver uses predefined MAC addresses.
+- * These are set in global var 'default_mac_addr' in this file.
+- * If required, these can be changed at run-time using
+- * the 'ifconfig' tool.
++ * By default, this driver uses MAC addresses from maclist, if
++ * these are not available the kernel api to randomly generate
++ * a locally assigned MAC address is used.  The MAC can be
++ * overridden with ifconfig if absolutely necessary.
+  *
+  * Example - to set ixp0 MAC address to 00:02:B3:66:88:AA, 
+  * run ifconfig with the following arguments:
+@@ -64,6 +64,7 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ #include <linux/version.h>
++#include <net/maclist.h>
+ 
+ #if KERNEL_VERSION(2,6,0) <= LINUX_VERSION_CODE
+ #include <linux/workqueue.h>
+@@ -130,6 +131,8 @@ static int dev_max_count = 1; /* only NP
+ static int dev_max_count = 2; /* only NPEB and NPEC */
+ #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+ static int dev_max_count = 3; /* all NPEs are used */
++#else
++static int dev_max_count = -1;/* use maclist_count */
+ #endif
+ 
+ #ifndef CONFIG_IXP400_NAPI
+@@ -614,21 +617,6 @@ static phy_cfg_t default_phy_cfg[] =
+ #endif
+ };
+ 
+-/* Default MAC addresses for EthAcc Ports 1 and 2 (using Intel MAC prefix) 
+- * Default is 
+- *   IX_ETH_PORT_1 -> MAC 00:02:b3:01:01:01
+- *   IX_ETH_PORT_2 -> MAC 00:02:b3:02:02:02
+- *   IX_ETH_PORT_3 -> MAC 00:02:b3:03:03:03
+-*/
+-static IxEthAccMacAddr default_mac_addr[] =
+-{
+-    {{0x00, 0x02, 0xB3, 0x01, 0x01, 0x01}}  /* EthAcc Port 0 */
+-    ,{{0x00, 0x02, 0xB3, 0x02, 0x02, 0x02}} /* EthAcc Port 1 */
+-#if defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+-    ,{{0x00, 0x02, 0xB3, 0x03, 0x03, 0x03}} /* EthAcc Port 2 */
+-#endif
+-};
+-
+ /* Default mapping of  NpeImageIds for EthAcc Ports 
+  * Default is 
+  *   IX_ETH_PORT_1 -> IX_ETH_NPE_B
+@@ -3325,28 +3313,10 @@ static int __devinit dev_eth_probe(struc
+ 
+     /* Defines the unicast MAC address
+      *
+-     * Here is a good place to read a board-specific MAC address
+-     * from a non-volatile memory, e.g. an external eeprom.
+-     * 
+-     * This memcpy uses a default MAC address from this
+-     * source code.
+-     *
+-     * This can be overriden later by the (optional) command
+-     *
+-     *     ifconfig ixp0 ether 0002b3010101
+-     *
++     * The code reads from the maclist API.
+      */
+-
+-    memcpy(ndev->dev_addr, 
+-	   &default_mac_addr[priv->port_id].macAddress,
+-	   IX_IEEE803_MAC_ADDRESS_SIZE);
+-
+-    /* possibly remove this test and the message when a valid MAC address 
+-     * is not hardcoded in the driver source code. 
+-     */
+-    if (is_valid_ether_addr(ndev->dev_addr))
+-    {
+-	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++    maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id);
++    P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
+ 	       (unsigned)ndev->dev_addr[0],
+ 	       (unsigned)ndev->dev_addr[1],
+ 	       (unsigned)ndev->dev_addr[2],
+@@ -3354,7 +3324,6 @@ static int __devinit dev_eth_probe(struc
+ 	       (unsigned)ndev->dev_addr[4],
+ 	       (unsigned)ndev->dev_addr[5],
+ 	       priv->port_id);
+-    }
+     
+     /* Set/update the internal packet size 
+      * This can be overriden later by the command
+@@ -3562,12 +3531,15 @@ static int __init ixp400_eth_init(void)
+ 
+     TRACE;
+ 
+-    /* check module parameter range */
+-    if (dev_max_count == 0 || dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
+-    {
+-	P_ERROR("Number of ports supported is dev_max_count <= %d\n", IX_ETH_ACC_NUMBER_OF_PORTS);
+-	return -1;
+-    }
++    /* fix dev_max_count to maclist_count - the actual number of
++     * available MACs
++     */
++    if (dev_max_count <= 0 || (dev_max_count > maclist_count() && maclist_count() > 0))
++	    dev_max_count = maclist_count();
++    if (dev_max_count <= 0)
++	    dev_max_count = 1;
++    else if (dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
++	    dev_max_count = IX_ETH_ACC_NUMBER_OF_PORTS;
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf b/recipes/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf
new file mode 100644
index 0000000000..f08b9a404c
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf
@@ -0,0 +1,4 @@
+# Add an alias for eth0 to ixp400_eth to cause the S40networking
+# init script to load the ixp400_eth driver on the first boot
+alias eth0 ixp400_eth
+options ixp400_eth dev_max_count=1
+\ No newline at end of file
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/module-param.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/module-param.patch
new file mode 100644
index 0000000000..c54c45d716
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/module-param.patch
@@ -0,0 +1,62 @@
+ ixp400_eth.c |   32 ++++++++++++++++++++++++++++++++
+ 1 files changed, 32 insertions(+)
+
+Index: ixp400_eth/ixp400_eth.c
+===================================================================
+--- ixp400_eth.orig/ixp400_eth.c
++++ ixp400_eth/ixp400_eth.c
+@@ -142,22 +142,54 @@
+ 
+ static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+ 
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(ixp400_netdev_max_backlog, "i");
++#else
++module_param(ixp400_netdev_max_backlog, int, 0644);
++#endif
+ MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(datapath_poll, "i");
++#else
++module_param(datapath_poll, int, 0644);
++#endif
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+ #endif /* CONFIG_IXP400_NAPI */
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(npe_learning, "i");
++#else
++module_param(npe_learning, int, 0644);
++#endif
+ MODULE_PARM_DESC(npe_learning, "If non-zero, NPE MAC Address Learning & Filtering feature will be enabled");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(log_level, "i");
++#else
++module_param(log_level, int, 0644);
++#endif
+ MODULE_PARM_DESC(log_level, "Set log level: 0 - None, 1 - Verbose, 2 - Debug");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(no_ixp400_sw_init, "i");
++#else
++module_param(no_ixp400_sw_init, int, 0644);
++#endif
+ MODULE_PARM_DESC(no_ixp400_sw_init, "If non-zero, do not initialise Intel IXP400 Software Release core components");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(no_phy_scan, "i");
++#else
++module_param(no_phy_scan, int, 0644);
++#endif
+ MODULE_PARM_DESC(no_phy_scan, "If non-zero, use hard-coded phy addresses");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(phy_reset, "i");
++#else
++module_param(phy_reset, int, 0644);
++#endif
+ MODULE_PARM_DESC(phy_reset, "If non-zero, reset the phys");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(dev_max_count, "i");
++#else
++module_param(dev_max_count, int, 0644);
++#endif
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch
new file mode 100644
index 0000000000..6891b6b4a9
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch
@@ -0,0 +1,54 @@
+--- ixp400_eth/ixp400_eth.c~	2006-01-09 01:03:11.000000000 +1030
++++ ixp400_eth/ixp400_eth.c	2006-01-09 01:05:27.000000000 +1030
+@@ -139,12 +139,12 @@
+  * skbuf to push into the linux stack, and avoid the performance degradations 
+  * during overflow.
+  */
+-static int netdev_max_backlog = 290;
++static int ixp400_netdev_max_backlog = 290;
+ 
+ static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+ 
+-MODULE_PARM(netdev_max_backlog, "i");
+-MODULE_PARM_DESC(netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
++MODULE_PARM(ixp400_netdev_max_backlog, "i");
++MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+ MODULE_PARM(datapath_poll, "i");
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+ #endif /* CONFIG_IXP400_NAPI */
+@@ -213,7 +213,7 @@
+  * high traffic rates. To measure the maximum throughput between the
+  * ports of the driver,
+  * - Modify /proc/sys/net/core/netdev_max_backlog value in the kernel 
+- * - Adjust netdev_max_backlog=n in the driver's command line
++ * - Adjust ixp400_netdev_max_backlog=n in the driver's command line
+  * in order to get the best rates depending on the testing tool 
+  * and the OS load.
+  *
+@@ -1997,7 +1997,7 @@
+     /* check if the system accepts more traffic and
+      * against chained mbufs 
+      */
+-    if ((qlevel < netdev_max_backlog)
++    if ((qlevel < ixp400_netdev_max_backlog)
+         && (IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(mbuf) == NULL))
+ #else
+     /* check against chained mbufs
+@@ -3776,13 +3776,13 @@
+ #ifndef CONFIG_IXP400_NAPI
+     /* set the softirq rx queue thresholds 
+      * (These numbers are based on tuning experiments)
+-     * maxbacklog =  (netdev_max_backlog * 10) / 63;
++     * maxbacklog =  (ixp400_netdev_max_backlog * 10) / 63;
+     */
+-    if (netdev_max_backlog == 0)
++    if (ixp400_netdev_max_backlog == 0)
+     {
+-	netdev_max_backlog = 290; /* system default */
++	ixp400_netdev_max_backlog = 290; /* system default */
+     }
+-    netdev_max_backlog /= BACKLOG_TUNE;
++    ixp400_netdev_max_backlog /= BACKLOG_TUNE;
+ 
+     TRACE;
+ #endif
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/params.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/params.patch
new file mode 100644
index 0000000000..86011deaaa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/params.patch
@@ -0,0 +1,75 @@
+*** ixp/ixp400_eth.c.orig	Wed Jun  7 21:31:59 2006
+--- ixp/ixp400_eth.c	Fri Jun  9 14:55:18 2006
+***************
+*** 112,135 ****
+  #define MOD_VERSION "1.5"
+  
+  /* Module parameters */
+! static int npe_learning = 1;      /* default : NPE learning & filtering enable */
+! static int log_level = 0;         /* default : no log */
+! static int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
+! static int no_phy_scan = 0;       /* default : do phy discovery */
+! static int phy_reset = 0;         /* default : mo phy reset */
+  
+  /* maximum number of ports supported by this driver ixp0, ixp1 ....
+   * The default is to configure all ports defined in EthAcc component
+  */
+  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
+! static int dev_max_count = 1; /* only NPEC is used */
+! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
+! static int dev_max_count = 1; /* only NPEB is used */
+  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
+        || defined (CONFIG_ARCH_ADI_COYOTE)
+! static int dev_max_count = 2; /* only NPEB and NPEC */
+  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+! static int dev_max_count = 3; /* all NPEs are used */
+  #endif
+  
+  #ifndef CONFIG_IXP400_NAPI
+--- 112,136 ----
+  #define MOD_VERSION "1.5"
+  
+  /* Module parameters */
+! /* gcc 4.1.1+kernel2.6.16 do not like it if these are static! */
+! int npe_learning = 1;      /* default : NPE learning & filtering enable */
+! int log_level = 0;         /* default : no log */
+! int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
+! int no_phy_scan = 0;       /* default : do phy discovery */
+! int phy_reset = 0;         /* default : mo phy reset */
+  
+  /* maximum number of ports supported by this driver ixp0, ixp1 ....
+   * The default is to configure all ports defined in EthAcc component
+  */
+  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
+! int dev_max_count = 1; /* only NPEC is used */
+! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
+! int dev_max_count = 1; /* only NPEB is used */
+  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
+        || defined (CONFIG_ARCH_ADI_COYOTE)
+! int dev_max_count = 2; /* only NPEB and NPEC */
+  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+! int dev_max_count = 3; /* all NPEs are used */
+  #endif
+  
+  #ifndef CONFIG_IXP400_NAPI
+***************
+*** 138,146 ****
+   * skbuf to push into the linux stack, and avoid the performance degradations 
+   * during overflow.
+   */
+! static int ixp400_netdev_max_backlog = 290;
+  
+! static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+  
+  MODULE_PARM(ixp400_netdev_max_backlog, "i");
+  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+--- 139,147 ----
+   * skbuf to push into the linux stack, and avoid the performance degradations 
+   * during overflow.
+   */
+! int ixp400_netdev_max_backlog = 290;
+  
+! int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+  
+  MODULE_PARM(ixp400_netdev_max_backlog, "i");
+  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch
new file mode 100644
index 0000000000..64fb310ee5
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch
@@ -0,0 +1,50 @@
+poll controller support
+
+ ixp400_eth.c |   22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -348,6 +348,12 @@ static int dev_pmu_timer_init(void);
+ extern void 
+ ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/* poll controller (needed for netconsole et al) */
++static void
++ixp425eth_poll_controller(struct net_device *dev);
++#endif
++
+ /* Private device data */
+ typedef struct {
+     spinlock_t lock;  /* multicast management lock */
+@@ -3060,6 +3066,19 @@ static int set_mac_address(struct net_de
+     return 0;
+ }
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling receive - used by netconsole and other diagnostic tools
++ * to allow network i/o with interrupts disabled.
++ * (stolen from 8139too.c by siddy)
++ */
++static void ixp425eth_poll_controller(struct net_device *dev)
++{
++        disable_irq(dev->irq);
++        dev_qmgr_os_isr(dev->irq, dev, NULL);
++        enable_irq(dev->irq);
++}
++#endif
+ 
+ /* 
+  *  TX QDISC
+@@ -3270,6 +3289,9 @@ static int __devinit dev_eth_probe(struc
+     ndev->get_stats = dev_get_stats;
+     ndev->set_multicast_list = dev_set_multicast_list;
+     ndev->flags |= IFF_MULTICAST;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++    ndev->poll_controller = ixp425eth_poll_controller;
++#endif
+ 
+     ndev->set_mac_address = set_mac_address;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch
new file mode 100644
index 0000000000..2ddc98938a
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch
@@ -0,0 +1,29 @@
+devices must be explicitely stopped when
+the driver is going do be removed, otherwise
+it will simply hang.
+
+ ixp400_eth.c |   13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -3800,9 +3800,16 @@ void __exit ixp400_eth_exit(void)
+ 
+     TRACE;
+ 
+-    /* We can only get here when the module use count is 0,
+-     * so there's no need to stop devices.
+-     */
++    /* stop devices */
++
++#if IS_KERNEL26
++    for (dev_count = 0;
++	 dev_count < dev_max_count;  /* module parameter */
++	 dev_count++)
++    {
++	do_dev_stop(platform_get_drvdata(&ixp400_eth_devices[dev_count]));
++    }
++#endif
+ 
+     if (no_ixp400_sw_init == 0) /* module parameter */
+     {
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/2.6.14.patch b/recipes/ixp425-eth/ixp400-eth-1.5/2.6.14.patch
new file mode 100644
index 0000000000..f3426e4287
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/2.6.14.patch
@@ -0,0 +1,35 @@
+ ixp400_eth.c |    8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1838,7 +1838,11 @@ static inline void dev_eth_type_trans(un
+     skb->len -= header_len;
+    
+     /* fill the pkt arrival time (set at the irq callback entry) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+     skb->stamp = irq_stamp;
++#else
++    skb_set_timestamp(skb, &irq_stamp);
++#endif
+  
+     /* fill the input device field */
+     skb->dev = dev;
+@@ -3014,7 +3018,7 @@ static int phy_init(void)
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
+-int dev_set_mac_address(struct net_device *dev, void *addr)
++static int set_mac_address(struct net_device *dev, void *addr)
+ {
+     int res;
+     IxEthAccMacAddr npeMacAddr;
+@@ -3266,7 +3270,7 @@ static int __devinit dev_eth_probe(struc
+     ndev->set_multicast_list = dev_set_multicast_list;
+     ndev->flags |= IFF_MULTICAST;
+ 
+-    ndev->set_mac_address = dev_set_mac_address;
++    ndev->set_mac_address = set_mac_address;
+ 
+ #ifdef CONFIG_IXP400_NAPI
+     ndev->poll = &dev_rx_poll;
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/2.6.15.patch b/recipes/ixp425-eth/ixp400-eth-1.5/2.6.15.patch
new file mode 100644
index 0000000000..83115d8efa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/2.6.15.patch
@@ -0,0 +1,18 @@
+2.6.15 needs platform_device.h
+
+ ixp400_eth.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -65,6 +65,10 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ 
++#ifndef to_platform_device
++#include <linux/platform_device.h>
++#endif
++
+ /*
+  * Intel IXP400 Software specific header files
+  */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/Makefile.patch b/recipes/ixp425-eth/ixp400-eth-1.5/Makefile.patch
new file mode 100644
index 0000000000..3bc51f0b66
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/Makefile.patch
@@ -0,0 +1,36 @@
+This is an OpenEmbedded only patch to make the code buildable in
+the OpenEmbedded environment.
+
+--- ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,30 @@
++obj-m := ixp400_eth.o
++
++CFLAGS_ixp400_eth.o = -DWall \
++          -I$(IXP4XX_CSR_DIR) \
++          -I$(OSAL_DIR)/ \
++          -I$(OSAL_DIR)/os/linux/include/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/core/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/os/linux/include/core/  \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/os/linux/include/core/ \
++          -I$(OSAL_DIR)/include/ \
++          -I$(OSAL_DIR)/include/modules/ \
++          -I$(OSAL_DIR)/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/include/modules/core/ \
++          -I$(OSAL_DIR)/include/platforms/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/xp425/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425/ \
++	  $(IX_CFLAGS)
++
++default:
++	$(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) $(KERNEL_VERBOSE) symverfile=$(IXP4XX_CSR_SYMVERS) -C $(LINUX_SRC) SUBDIRS=$(PWD) modules
++
++clean:
++	rm -f ixp400_eth.ko
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/continue-if-qmgr-init-fails.patch b/recipes/ixp425-eth/ixp400-eth-1.5/continue-if-qmgr-init-fails.patch
new file mode 100644
index 0000000000..8508790fa5
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/continue-if-qmgr-init-fails.patch
@@ -0,0 +1,22 @@
+tries to go on even if queue manager initialization
+fails. this is hand because you'll be allowed to
+insert ixp400_eth immediately after you have removed
+it, without re-inserting ixp400.
+
+ ixp400_eth.c |    5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2850,10 +2850,7 @@ static int qmgr_init(void)
+     /* Initialise Queue Manager */
+     P_VERBOSE("Initialising Queue Manager...\n");
+     if ((res = ixQMgrInit()))
+-    {
+-	P_ERROR("Error initialising queue manager!\n");
+-	return -1;
+-    }
++	P_ERROR("Error initialising queue manager, trying to continue!\n");
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/debug.patch b/recipes/ixp425-eth/ixp400-eth-1.5/debug.patch
new file mode 100644
index 0000000000..c684c078d2
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/debug.patch
@@ -0,0 +1,131 @@
+This patch is not necessary but helps when debugging the build
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1350,9 +1350,10 @@ static int dev_media_check_thread (void*
+ 	
+ 	    if (res != IX_ETH_ACC_SUCCESS)
+ 	    {
+-		P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
++		P_WARN("%s: ixEthMiiLinkStatus failed on PHY%d.\n"
+ 		       "\tCan't determine\nthe auto negotiated parameters. "
+ 		       "Using default values.\n",
++		       dev->name,
+ 		       phyNum); 
+ 		/* something is bad, gracefully stops the loop */
+ 		priv->maintenanceCheckStopped = TRUE;
+@@ -2213,7 +2214,8 @@ static int port_enable(struct net_device
+ 	   IX_IEEE803_MAC_ADDRESS_SIZE);
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -2707,8 +2709,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out)))
+ 	    {
+-		P_ERROR("Error reading MII reg %d on phy %d\n",
+-		       data->reg_num, data->phy_id);
++		P_ERROR("%s: Error reading MII reg %d on phy %d\n",
++		       dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -2720,8 +2722,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in)))
+ 	    {
+-		P_ERROR("Error writing MII reg %d on phy %d\n",
+-                        data->reg_num, data->phy_id);
++		P_ERROR("%s: Error writing MII reg %d on phy %d\n",
++                        dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -3049,7 +3051,8 @@ static int set_mac_address(struct net_de
+     /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -3267,6 +3270,8 @@ static int __devinit dev_eth_probe(struc
+ 	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+     if (!priv->maintenanceCheckThreadComplete)
+     {
++	P_ERROR("%s: Failed to allocate maintenance semaphore %d\n",
++		ndev->name, priv->port_id);
+ 	goto error;
+     }
+     priv->lock = SPIN_LOCK_UNLOCKED;
+@@ -3360,7 +3365,11 @@ static int __devinit dev_eth_probe(struc
+ 
+ #if IS_KERNEL26
+     if (register_netdev(ndev))
++    {
++	P_ERROR("%s: Failed to register netdevice %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
++    }
+ #else
+     found_devices++;
+ #endif /* IS_KERNEL26 */
+@@ -3370,6 +3379,8 @@ static int __devinit dev_eth_probe(struc
+     /* register EthAcc callbacks for this port */
+     if (dev_rxtxcallback_register(portId, (UINT32)ndev))
+     {
++    	P_ERROR("%s: Failed to register callback %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
+     }
+ 
+@@ -3393,6 +3404,7 @@ static int __devinit dev_eth_probe(struc
+ 
+ /* Error handling: enter here whenever error detected */
+ error:
++    P_ERROR("%s: dev_eth_probe fails\n", ndev->name);
+     TRACE;
+ 
+ #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED
+@@ -3465,21 +3477,21 @@ static int __devexit dev_eth_remove(int 
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEA))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 
+@@ -3528,6 +3540,9 @@ static int __init ixp400_eth_init(void)
+     TRACE;
+ 
+     P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n");
++#ifdef IX_OSAL_ENSURE_ON
++    ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL);
++#endif
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/device-name.patch b/recipes/ixp425-eth/ixp400-eth-1.5/device-name.patch
new file mode 100644
index 0000000000..d8bbc97b8c
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/device-name.patch
@@ -0,0 +1,47 @@
+ register the ethernet devices as ethX
+
+ ixp400_eth.c |   41 +++++++++++++++++++----------------------
+ 1 file changed, 19 insertions(+), 22 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -160,9 +160,6 @@ MODULE_PARM_DESC(phy_reset, "If non-zero
+ MODULE_PARM(dev_max_count, "i");
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+-/* devices will be called ixp0 and ixp1 */
+-#define DEVICE_NAME "ixp"
+-
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
+ #define PHY_SPEED_10    0
+ #define PHY_SPEED_100   1
+@@ -1570,7 +1568,7 @@ static int dev_pmu_timer_setup(void)
+     if (request_irq(IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL,
+                     dev_pmu_timer_os_isr,
+                     SA_SHIRQ,
+-                    DEVICE_NAME,
++                    MODULE_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+         P_ERROR("Failed to reassign irq to PMU timer interrupt!\n");
+@@ -3009,8 +3008,8 @@ static int phy_init(void)
+ 	if (port_id == IX_ETH_PORT_2) npe_id = "C";
+ 	if (port_id == IX_ETH_PORT_3) npe_id = "A";
+ 
+-	P_INFO("%s%d is using NPE%s and the PHY at address %d\n",
+-	       DEVICE_NAME, dev_count, npe_id, phyAddresses[port_id]);
++	P_INFO("ethernet %d using NPE%s and the PHY at address %d\n",
++	       dev_count, npe_id, phyAddresses[port_id]);
+ 
+ 	/* Set the MAC to the same duplex mode as the phy */
+ 	ixEthAccPortDuplexModeSet(port_id,
+@@ -3215,9 +3215,6 @@ static int __devinit dev_eth_probe(struc
+     /* set the private port ID */
+     priv->port_id  = portId;
+ 
+-    /* set device name */
+-    sprintf(ndev->name, DEVICE_NAME"%d", priv->port_id);
+-
+     TRACE;
+ 
+     /* initialize RX pool */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/int-random.patch b/recipes/ixp425-eth/ixp400-eth-1.5/int-random.patch
new file mode 100644
index 0000000000..fede9daf90
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/int-random.patch
@@ -0,0 +1,16 @@
+use the ethernet device interrupts to gather entropy
+
+ ixp400_eth.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2864,7 +2864,7 @@ static int qmgr_init(void)
+ 
+     if (request_irq(IX_OSAL_IXP400_QM1_IRQ_LVL,
+                     dev_qmgr_os_isr,
+-                    SA_SHIRQ,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
+                     MODULE_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/le.patch b/recipes/ixp425-eth/ixp400-eth-1.5/le.patch
new file mode 100644
index 0000000000..3d569015e6
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/le.patch
@@ -0,0 +1,41 @@
+little endian support
+
+ ixp400_eth.c |   20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2040,6 +2040,16 @@ static void rx_cb(UINT32 callbackTag, IX
+ 	skb->tail = skb->data + len;
+ 	skb->len = len;
+ 	
++#ifndef __ARMEB__
++	{
++	    /* Byte swap all words containing data from the buffer. */
++	    unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	    unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	    while (p < e)
++		*p = ntohl(*p), ++p;
++	}
++#endif
++
+ #ifdef DEBUG_DUMP
+ 	skb_dump("rx", skb);
+ #endif
+@@ -2431,6 +2441,16 @@ static int dev_hard_start_xmit(struct sk
+ 	return 0;
+     }
+ 
++#ifndef __ARMEB__
++    {
++	/* Byte swap all words containing data from the buffer. */
++	unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	while (p < e)
++	    *p = ntohl(*p), ++p;
++    }
++#endif
++
+ #ifdef DEBUG_DUMP
+     skb_dump("tx", skb);
+ #endif
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/mac-address.patch b/recipes/ixp425-eth/ixp400-eth-1.5/mac-address.patch
new file mode 100644
index 0000000000..e23eaf5f2b
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/mac-address.patch
@@ -0,0 +1,123 @@
+Patch to use maclist - get the MAC to use from the board level
+MAC repository based on the device portId.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -23,10 +23,10 @@
+  * This driver is written and optimized for Intel Xscale technology.
+  *
+  * SETUP NOTES:
+- * By default, this driver uses predefined MAC addresses.
+- * These are set in global var 'default_mac_addr' in this file.
+- * If required, these can be changed at run-time using
+- * the 'ifconfig' tool.
++ * By default, this driver uses MAC addresses from maclist, if
++ * these are not available the kernel api to randomly generate
++ * a locally assigned MAC address is used.  The MAC can be
++ * overridden with ifconfig if absolutely necessary.
+  *
+  * Example - to set ixp0 MAC address to 00:02:B3:66:88:AA, 
+  * run ifconfig with the following arguments:
+@@ -64,6 +64,7 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ #include <linux/version.h>
++#include <net/maclist.h>
+ 
+ #if KERNEL_VERSION(2,6,0) <= LINUX_VERSION_CODE
+ #include <linux/workqueue.h>
+@@ -130,6 +131,8 @@ static int dev_max_count = 1; /* only NP
+ static int dev_max_count = 2; /* only NPEB and NPEC */
+ #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+ static int dev_max_count = 3; /* all NPEs are used */
++#else
++static int dev_max_count = -1;/* use maclist_count */
+ #endif
+ 
+ #ifndef CONFIG_IXP400_NAPI
+@@ -614,21 +617,6 @@ static phy_cfg_t default_phy_cfg[] =
+ #endif
+ };
+ 
+-/* Default MAC addresses for EthAcc Ports 1 and 2 (using Intel MAC prefix) 
+- * Default is 
+- *   IX_ETH_PORT_1 -> MAC 00:02:b3:01:01:01
+- *   IX_ETH_PORT_2 -> MAC 00:02:b3:02:02:02
+- *   IX_ETH_PORT_3 -> MAC 00:02:b3:03:03:03
+-*/
+-static IxEthAccMacAddr default_mac_addr[] =
+-{
+-    {{0x00, 0x02, 0xB3, 0x01, 0x01, 0x01}}  /* EthAcc Port 0 */
+-    ,{{0x00, 0x02, 0xB3, 0x02, 0x02, 0x02}} /* EthAcc Port 1 */
+-#if defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+-    ,{{0x00, 0x02, 0xB3, 0x03, 0x03, 0x03}} /* EthAcc Port 2 */
+-#endif
+-};
+-
+ /* Default mapping of  NpeImageIds for EthAcc Ports 
+  * Default is 
+  *   IX_ETH_PORT_1 -> IX_ETH_NPE_B
+@@ -3325,28 +3313,10 @@ static int __devinit dev_eth_probe(struc
+ 
+     /* Defines the unicast MAC address
+      *
+-     * Here is a good place to read a board-specific MAC address
+-     * from a non-volatile memory, e.g. an external eeprom.
+-     * 
+-     * This memcpy uses a default MAC address from this
+-     * source code.
+-     *
+-     * This can be overriden later by the (optional) command
+-     *
+-     *     ifconfig ixp0 ether 0002b3010101
+-     *
++     * The code reads from the maclist API.
+      */
+-
+-    memcpy(ndev->dev_addr, 
+-	   &default_mac_addr[priv->port_id].macAddress,
+-	   IX_IEEE803_MAC_ADDRESS_SIZE);
+-
+-    /* possibly remove this test and the message when a valid MAC address 
+-     * is not hardcoded in the driver source code. 
+-     */
+-    if (is_valid_ether_addr(ndev->dev_addr))
+-    {
+-	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++    maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id);
++    P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
+ 	       (unsigned)ndev->dev_addr[0],
+ 	       (unsigned)ndev->dev_addr[1],
+ 	       (unsigned)ndev->dev_addr[2],
+@@ -3354,7 +3324,6 @@ static int __devinit dev_eth_probe(struc
+ 	       (unsigned)ndev->dev_addr[4],
+ 	       (unsigned)ndev->dev_addr[5],
+ 	       priv->port_id);
+-    }
+     
+     /* Set/update the internal packet size 
+      * This can be overriden later by the command
+@@ -3562,12 +3531,15 @@ static int __init ixp400_eth_init(void)
+ 
+     TRACE;
+ 
+-    /* check module parameter range */
+-    if (dev_max_count == 0 || dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
+-    {
+-	P_ERROR("Number of ports supported is dev_max_count <= %d\n", IX_ETH_ACC_NUMBER_OF_PORTS);
+-	return -1;
+-    }
++    /* fix dev_max_count to maclist_count - the actual number of
++     * available MACs
++     */
++    if (dev_max_count <= 0 || (dev_max_count > maclist_count() && maclist_count() > 0))
++	    dev_max_count = maclist_count();
++    if (dev_max_count <= 0)
++	    dev_max_count = 1;
++    else if (dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
++	    dev_max_count = IX_ETH_ACC_NUMBER_OF_PORTS;
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/modprobe.conf b/recipes/ixp425-eth/ixp400-eth-1.5/modprobe.conf
new file mode 100644
index 0000000000..f08b9a404c
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/modprobe.conf
@@ -0,0 +1,4 @@
+# Add an alias for eth0 to ixp400_eth to cause the S40networking
+# init script to load the ixp400_eth driver on the first boot
+alias eth0 ixp400_eth
+options ixp400_eth dev_max_count=1
+\ No newline at end of file
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/module-param.patch b/recipes/ixp425-eth/ixp400-eth-1.5/module-param.patch
new file mode 100644
index 0000000000..c54c45d716
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/module-param.patch
@@ -0,0 +1,62 @@
+ ixp400_eth.c |   32 ++++++++++++++++++++++++++++++++
+ 1 files changed, 32 insertions(+)
+
+Index: ixp400_eth/ixp400_eth.c
+===================================================================
+--- ixp400_eth.orig/ixp400_eth.c
++++ ixp400_eth/ixp400_eth.c
+@@ -142,22 +142,54 @@
+ 
+ static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+ 
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(ixp400_netdev_max_backlog, "i");
++#else
++module_param(ixp400_netdev_max_backlog, int, 0644);
++#endif
+ MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(datapath_poll, "i");
++#else
++module_param(datapath_poll, int, 0644);
++#endif
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+ #endif /* CONFIG_IXP400_NAPI */
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(npe_learning, "i");
++#else
++module_param(npe_learning, int, 0644);
++#endif
+ MODULE_PARM_DESC(npe_learning, "If non-zero, NPE MAC Address Learning & Filtering feature will be enabled");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(log_level, "i");
++#else
++module_param(log_level, int, 0644);
++#endif
+ MODULE_PARM_DESC(log_level, "Set log level: 0 - None, 1 - Verbose, 2 - Debug");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(no_ixp400_sw_init, "i");
++#else
++module_param(no_ixp400_sw_init, int, 0644);
++#endif
+ MODULE_PARM_DESC(no_ixp400_sw_init, "If non-zero, do not initialise Intel IXP400 Software Release core components");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(no_phy_scan, "i");
++#else
++module_param(no_phy_scan, int, 0644);
++#endif
+ MODULE_PARM_DESC(no_phy_scan, "If non-zero, use hard-coded phy addresses");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(phy_reset, "i");
++#else
++module_param(phy_reset, int, 0644);
++#endif
+ MODULE_PARM_DESC(phy_reset, "If non-zero, reset the phys");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(dev_max_count, "i");
++#else
++module_param(dev_max_count, int, 0644);
++#endif
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/netdev_max_backlog.patch b/recipes/ixp425-eth/ixp400-eth-1.5/netdev_max_backlog.patch
new file mode 100644
index 0000000000..6891b6b4a9
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/netdev_max_backlog.patch
@@ -0,0 +1,54 @@
+--- ixp400_eth/ixp400_eth.c~	2006-01-09 01:03:11.000000000 +1030
++++ ixp400_eth/ixp400_eth.c	2006-01-09 01:05:27.000000000 +1030
+@@ -139,12 +139,12 @@
+  * skbuf to push into the linux stack, and avoid the performance degradations 
+  * during overflow.
+  */
+-static int netdev_max_backlog = 290;
++static int ixp400_netdev_max_backlog = 290;
+ 
+ static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+ 
+-MODULE_PARM(netdev_max_backlog, "i");
+-MODULE_PARM_DESC(netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
++MODULE_PARM(ixp400_netdev_max_backlog, "i");
++MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+ MODULE_PARM(datapath_poll, "i");
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+ #endif /* CONFIG_IXP400_NAPI */
+@@ -213,7 +213,7 @@
+  * high traffic rates. To measure the maximum throughput between the
+  * ports of the driver,
+  * - Modify /proc/sys/net/core/netdev_max_backlog value in the kernel 
+- * - Adjust netdev_max_backlog=n in the driver's command line
++ * - Adjust ixp400_netdev_max_backlog=n in the driver's command line
+  * in order to get the best rates depending on the testing tool 
+  * and the OS load.
+  *
+@@ -1997,7 +1997,7 @@
+     /* check if the system accepts more traffic and
+      * against chained mbufs 
+      */
+-    if ((qlevel < netdev_max_backlog)
++    if ((qlevel < ixp400_netdev_max_backlog)
+         && (IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(mbuf) == NULL))
+ #else
+     /* check against chained mbufs
+@@ -3776,13 +3776,13 @@
+ #ifndef CONFIG_IXP400_NAPI
+     /* set the softirq rx queue thresholds 
+      * (These numbers are based on tuning experiments)
+-     * maxbacklog =  (netdev_max_backlog * 10) / 63;
++     * maxbacklog =  (ixp400_netdev_max_backlog * 10) / 63;
+     */
+-    if (netdev_max_backlog == 0)
++    if (ixp400_netdev_max_backlog == 0)
+     {
+-	netdev_max_backlog = 290; /* system default */
++	ixp400_netdev_max_backlog = 290; /* system default */
+     }
+-    netdev_max_backlog /= BACKLOG_TUNE;
++    ixp400_netdev_max_backlog /= BACKLOG_TUNE;
+ 
+     TRACE;
+ #endif
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/params.patch b/recipes/ixp425-eth/ixp400-eth-1.5/params.patch
new file mode 100644
index 0000000000..86011deaaa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/params.patch
@@ -0,0 +1,75 @@
+*** ixp/ixp400_eth.c.orig	Wed Jun  7 21:31:59 2006
+--- ixp/ixp400_eth.c	Fri Jun  9 14:55:18 2006
+***************
+*** 112,135 ****
+  #define MOD_VERSION "1.5"
+  
+  /* Module parameters */
+! static int npe_learning = 1;      /* default : NPE learning & filtering enable */
+! static int log_level = 0;         /* default : no log */
+! static int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
+! static int no_phy_scan = 0;       /* default : do phy discovery */
+! static int phy_reset = 0;         /* default : mo phy reset */
+  
+  /* maximum number of ports supported by this driver ixp0, ixp1 ....
+   * The default is to configure all ports defined in EthAcc component
+  */
+  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
+! static int dev_max_count = 1; /* only NPEC is used */
+! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
+! static int dev_max_count = 1; /* only NPEB is used */
+  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
+        || defined (CONFIG_ARCH_ADI_COYOTE)
+! static int dev_max_count = 2; /* only NPEB and NPEC */
+  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+! static int dev_max_count = 3; /* all NPEs are used */
+  #endif
+  
+  #ifndef CONFIG_IXP400_NAPI
+--- 112,136 ----
+  #define MOD_VERSION "1.5"
+  
+  /* Module parameters */
+! /* gcc 4.1.1+kernel2.6.16 do not like it if these are static! */
+! int npe_learning = 1;      /* default : NPE learning & filtering enable */
+! int log_level = 0;         /* default : no log */
+! int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
+! int no_phy_scan = 0;       /* default : do phy discovery */
+! int phy_reset = 0;         /* default : mo phy reset */
+  
+  /* maximum number of ports supported by this driver ixp0, ixp1 ....
+   * The default is to configure all ports defined in EthAcc component
+  */
+  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
+! int dev_max_count = 1; /* only NPEC is used */
+! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
+! int dev_max_count = 1; /* only NPEB is used */
+  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
+        || defined (CONFIG_ARCH_ADI_COYOTE)
+! int dev_max_count = 2; /* only NPEB and NPEC */
+  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+! int dev_max_count = 3; /* all NPEs are used */
+  #endif
+  
+  #ifndef CONFIG_IXP400_NAPI
+***************
+*** 138,146 ****
+   * skbuf to push into the linux stack, and avoid the performance degradations 
+   * during overflow.
+   */
+! static int ixp400_netdev_max_backlog = 290;
+  
+! static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+  
+  MODULE_PARM(ixp400_netdev_max_backlog, "i");
+  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+--- 139,147 ----
+   * skbuf to push into the linux stack, and avoid the performance degradations 
+   * during overflow.
+   */
+! int ixp400_netdev_max_backlog = 290;
+  
+! int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+  
+  MODULE_PARM(ixp400_netdev_max_backlog, "i");
+  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/poll-controller.patch b/recipes/ixp425-eth/ixp400-eth-1.5/poll-controller.patch
new file mode 100644
index 0000000000..64fb310ee5
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/poll-controller.patch
@@ -0,0 +1,50 @@
+poll controller support
+
+ ixp400_eth.c |   22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -348,6 +348,12 @@ static int dev_pmu_timer_init(void);
+ extern void 
+ ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/* poll controller (needed for netconsole et al) */
++static void
++ixp425eth_poll_controller(struct net_device *dev);
++#endif
++
+ /* Private device data */
+ typedef struct {
+     spinlock_t lock;  /* multicast management lock */
+@@ -3060,6 +3066,19 @@ static int set_mac_address(struct net_de
+     return 0;
+ }
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling receive - used by netconsole and other diagnostic tools
++ * to allow network i/o with interrupts disabled.
++ * (stolen from 8139too.c by siddy)
++ */
++static void ixp425eth_poll_controller(struct net_device *dev)
++{
++        disable_irq(dev->irq);
++        dev_qmgr_os_isr(dev->irq, dev, NULL);
++        enable_irq(dev->irq);
++}
++#endif
+ 
+ /* 
+  *  TX QDISC
+@@ -3270,6 +3289,9 @@ static int __devinit dev_eth_probe(struc
+     ndev->get_stats = dev_get_stats;
+     ndev->set_multicast_list = dev_set_multicast_list;
+     ndev->flags |= IFF_MULTICAST;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++    ndev->poll_controller = ixp425eth_poll_controller;
++#endif
+ 
+     ndev->set_mac_address = set_mac_address;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5/stop-on-rmmod.patch b/recipes/ixp425-eth/ixp400-eth-1.5/stop-on-rmmod.patch
new file mode 100644
index 0000000000..2ddc98938a
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5/stop-on-rmmod.patch
@@ -0,0 +1,29 @@
+devices must be explicitely stopped when
+the driver is going do be removed, otherwise
+it will simply hang.
+
+ ixp400_eth.c |   13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -3800,9 +3800,16 @@ void __exit ixp400_eth_exit(void)
+ 
+     TRACE;
+ 
+-    /* We can only get here when the module use count is 0,
+-     * so there's no need to stop devices.
+-     */
++    /* stop devices */
++
++#if IS_KERNEL26
++    for (dev_count = 0;
++	 dev_count < dev_max_count;  /* module parameter */
++	 dev_count++)
++    {
++	do_dev_stop(platform_get_drvdata(&ixp400_eth_devices[dev_count]));
++    }
++#endif
+ 
+     if (no_ixp400_sw_init == 0) /* module parameter */
+     {
diff --git a/recipes/ixp425-eth/ixp400-eth_1.4.bb b/recipes/ixp425-eth/ixp400-eth_1.4.bb
new file mode 100644
index 0000000000..6b1ff0c8d2
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth_1.4.bb
@@ -0,0 +1,54 @@
+# This is the Intel GPL IXP4XX ethernet driver (Linux) plus patches
+# to make it work on 2.6 kernels.
+#
+LICENSE = "GPL"
+SRC_URI = "ftp://aiedownload.intel.com/df-support/8500/eng/GPL_ixp400LinuxEthernetDriverPatch-1_4.zip"
+SRC_URI += "file://ixp400-le-be.patch;patch=1"
+SRC_URI += "file://makefile.patch;patch=1"
+SRC_URI += "file://2.6.13.patch;patch=1"
+SRC_URI += "file://2.6.14.patch;patch=1"
+SRC_URI += "file://ixp400_pollcontroller.patch;patch=1"
+SRC_URI += "file://2.6.14-mm.patch;patch=1"
+SRC_URI += "file://modprobe.conf"
+PR = "r9"
+
+DEPENDS = "ixp4xx-csr"
+RDEPENDS = "ixp4xx-csr"
+
+S = "${WORKDIR}"
+
+COMPATIBLE_HOST = "^arm.*-linux.*"
+COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
+
+PROVIDES = "virtual/ixp-eth"
+RPROVIDES = "ixp-eth"
+
+inherit module
+
+# This is a somewhat arbitrary choice:
+OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
+
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
+
+EXTRA_OEMAKE = "'CC=${KERNEL_CC}' \
+		'LD=${KERNEL_LD}' \
+		'PWD=${S}' \
+		'IX_TARGET=${IX_TARGET}' \
+		'IXP4XX_CSR_DIR=${STAGING_INCDIR}/linux/ixp4xx-csr' \
+		'OSAL_DIR=${OSAL_DIR}' \
+		'IX_CFLAGS=-DIX_UTOPIAMODE=0 -DIX_MPHYSINGLEPORT=1 -DCONFIG_IXP400_ETH_NPEB_ONLY=1' \
+		'LINUX_SRC=${STAGING_KERNEL_DIR}' \
+		'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \
+		"
+
+do_compile () {
+        unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+	oe_runmake
+}
+
+do_install () {
+	install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net
+	install -m 0644 ixp400_eth.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net/
+	install -d ${D}${sysconfdir}/modprobe.d
+	install -m 0644 modprobe.conf ${D}${sysconfdir}/modprobe.d/eth0
+}
diff --git a/recipes/ixp425-eth/ixp400-eth_1.5.1.bb b/recipes/ixp425-eth/ixp400-eth_1.5.1.bb
new file mode 100644
index 0000000000..2fa04fc672
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth_1.5.1.bb
@@ -0,0 +1,87 @@
+DEFAULT_PREFERENCE = "-1"
+# This is the Intel GPL IXP4XX ethernet driver (Linux) plus patches
+# to make it work on 2.6 kernels.
+#
+HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp420.htm"
+LICENSE = "GPL"
+PR = "r0"
+
+DEPENDS = "ixp-osal"
+DEPENDS = "ixp4xx-csr"
+RDEPENDS = "ixp4xx-csr"
+
+SRC_URI = "http://downloadmirror.intel.com/df-support/10159/eng/GPL_ixp400LinuxEthernetDriverPatch-1_5_1.zip"
+SRC_URI += "file://2.6.14.patch;patch=1"
+SRC_URI += "file://2.6.15.patch;patch=1"
+SRC_URI += "file://device-name.patch;patch=1"
+SRC_URI += "file://poll-controller.patch;patch=1"
+SRC_URI += "file://le.patch;patch=1"
+SRC_URI += "file://int-random.patch;patch=1"
+SRC_URI += "file://stop-on-rmmod.patch;patch=1"
+SRC_URI += "file://continue-if-qmgr-init-fails.patch;patch=1"
+SRC_URI += "file://netdev_max_backlog.patch;patch=1"
+SRC_URI += "file://debug.patch;patch=1"
+SRC_URI += "file://Makefile.patch;patch=1"
+SRC_URI += "file://params.patch;patch=1"
+SRC_URI += "file://module-param.patch;patch=1"
+SRC_URI += "file://modprobe.conf"
+
+S = "${WORKDIR}"
+
+COMPATIBLE_HOST = "^arm.*-linux.*"
+COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
+
+PROVIDES = "virtual/ixp-eth"
+RPROVIDES = "ixp-eth"
+
+inherit module
+
+# This is a somewhat arbitrary choice:
+OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
+
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
+IX_ENSURE = ""
+#IX_ENSURE = "-DIX_OSAL_ENSURE_ON=1"
+# The following controls the name of the ethernet devices which get
+# registered, the default (if this is empty) is ixp0, ixp1, otherwise
+# it is eth0, eth1
+DEVICE_NAME = "-DIX_DEVICE_NAME_ETH=1"
+
+IXP4XX_CSR_SYMVERS = "${STAGING_KERNEL_DIR}/ixp400-csr.symvers"
+
+EXTRA_OEMAKE = "'PWD=${S}' \
+		'IX_TARGET=${IX_TARGET}' \
+		'IXP4XX_CSR_DIR=${STAGING_INCDIR}/linux/ixp4xx-csr' \
+		'IXP4XX_CSR_SYMVERS=${IXP4XX_CSR_SYMVERS}' \
+		'OSAL_DIR=${OSAL_DIR}' \
+		'IX_CFLAGS=-DIX_UTOPIAMODE=0 -DIX_MPHYSINGLEPORT=1 ${IX_ENSURE} ${DEVICE_NAME} -DIX_COMPONENT_NAME=-1' \
+		'LINUX_SRC=${STAGING_KERNEL_DIR}' \
+		'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \
+		"
+
+# This is to check for unresolved symbol errors and ensure the build
+# fails, an error here probably means too much as been deconfigured
+# out of ixp4xx-csr.
+KCONFIG_FILE = "${STAGING_KERNEL_DIR}/kernel-config"
+do_compile_append () {
+	. '${KCONFIG_FILE}'
+	echo "MODPOST: checking that all symbols are resolved"
+	if '${STAGING_KERNEL_DIR}/scripts/mod/modpost' \
+		${CONFIG_MODVERSIONS:+-m} \
+		${CONFIG_MODULE_SRCVERSION_ALL:+-a} \
+		-i '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' \
+		ixp400_eth.o 2>&1 | egrep .
+	then
+		echo "MODPOST errors - see above"
+		return 1
+	else
+		return 0
+	fi
+}
+
+do_install () {
+	install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net
+	install -m 0644 ixp400_eth.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net/
+	install -d ${D}${sysconfdir}/modprobe.d
+	install -m 0644 modprobe.conf ${D}${sysconfdir}/modprobe.d/eth0
+}
diff --git a/recipes/ixp425-eth/ixp400-eth_1.5.bb b/recipes/ixp425-eth/ixp400-eth_1.5.bb
new file mode 100644
index 0000000000..5e25deb1d4
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth_1.5.bb
@@ -0,0 +1,86 @@
+# This is the Intel GPL IXP4XX ethernet driver (Linux) plus patches
+# to make it work on 2.6 kernels.
+#
+HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp420.htm"
+LICENSE = "GPL"
+PR = "r15"
+
+DEPENDS = "ixp-osal"
+DEPENDS = "ixp4xx-csr"
+RDEPENDS = "ixp4xx-csr"
+
+SRC_URI = "ftp://aiedownload.intel.com/df-support/9519/eng/GPL_ixp400LinuxEthernetDriverPatch-1_5.zip"
+SRC_URI += "file://2.6.14.patch;patch=1"
+SRC_URI += "file://2.6.15.patch;patch=1"
+SRC_URI += "file://device-name.patch;patch=1"
+SRC_URI += "file://poll-controller.patch;patch=1"
+SRC_URI += "file://le.patch;patch=1"
+SRC_URI += "file://int-random.patch;patch=1"
+SRC_URI += "file://stop-on-rmmod.patch;patch=1"
+SRC_URI += "file://continue-if-qmgr-init-fails.patch;patch=1"
+SRC_URI += "file://netdev_max_backlog.patch;patch=1"
+SRC_URI += "file://debug.patch;patch=1"
+SRC_URI += "file://Makefile.patch;patch=1"
+SRC_URI += "file://params.patch;patch=1"
+SRC_URI += "file://module-param.patch;patch=1"
+SRC_URI += "file://modprobe.conf"
+
+S = "${WORKDIR}"
+
+COMPATIBLE_HOST = "^arm.*-linux.*"
+COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
+
+PROVIDES = "virtual/ixp-eth"
+RPROVIDES = "ixp-eth"
+
+inherit module
+
+# This is a somewhat arbitrary choice:
+OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
+
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
+IX_ENSURE = ""
+#IX_ENSURE = "-DIX_OSAL_ENSURE_ON=1"
+# The following controls the name of the ethernet devices which get
+# registered, the default (if this is empty) is ixp0, ixp1, otherwise
+# it is eth0, eth1
+DEVICE_NAME = "-DIX_DEVICE_NAME_ETH=1"
+
+IXP4XX_CSR_SYMVERS = "${STAGING_KERNEL_DIR}/ixp400-csr.symvers"
+
+EXTRA_OEMAKE = "'PWD=${S}' \
+		'IX_TARGET=${IX_TARGET}' \
+		'IXP4XX_CSR_DIR=${STAGING_INCDIR}/linux/ixp4xx-csr' \
+		'IXP4XX_CSR_SYMVERS=${IXP4XX_CSR_SYMVERS}' \
+		'OSAL_DIR=${OSAL_DIR}' \
+		'IX_CFLAGS=-DIX_UTOPIAMODE=0 -DIX_MPHYSINGLEPORT=1 ${IX_ENSURE} ${DEVICE_NAME} -DIX_COMPONENT_NAME=-1' \
+		'LINUX_SRC=${STAGING_KERNEL_DIR}' \
+		'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \
+		"
+
+# This is to check for unresolved symbol errors and ensure the build
+# fails, an error here probably means too much as been deconfigured
+# out of ixp4xx-csr.
+KCONFIG_FILE = "${STAGING_KERNEL_DIR}/kernel-config"
+do_compile_append () {
+	. '${KCONFIG_FILE}'
+	echo "MODPOST: checking that all symbols are resolved"
+	if '${STAGING_KERNEL_DIR}/scripts/mod/modpost' \
+		${CONFIG_MODVERSIONS:+-m} \
+		${CONFIG_MODULE_SRCVERSION_ALL:+-a} \
+		-i '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' \
+		ixp400_eth.o 2>&1 | egrep .
+	then
+		echo "MODPOST errors - see above"
+		return 1
+	else
+		return 0
+	fi
+}
+
+do_install () {
+	install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net
+	install -m 0644 ixp400_eth.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net/
+	install -d ${D}${sysconfdir}/modprobe.d
+	install -m 0644 modprobe.conf ${D}${sysconfdir}/modprobe.d/eth0
+}
diff --git a/recipes/ixp425-eth/ixp425-eth-1.2/2.6.13.patch b/recipes/ixp425-eth/ixp425-eth-1.2/2.6.13.patch
new file mode 100644
index 0000000000..e5825740bb
--- /dev/null
+++ b/recipes/ixp425-eth/ixp425-eth-1.2/2.6.13.patch
@@ -0,0 +1,39 @@
+--- ./ixp425_eth.c	2005-10-01 00:45:45.180897520 -0700
++++ ./ixp425_eth.c	2005-10-01 00:50:45.179775259 -0700
+@@ -797,7 +797,9 @@
+ 	skb->pkt_type = PACKET_HOST;    /* Default type */
+         skb->ip_summed = 0;
+         skb->priority = 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+         skb->security = 0;
++#endif
+ #ifdef CONFIG_NET_SCHED
+ 	skb->tc_index = 0;
+ #endif
+@@ -2564,8 +2566,14 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+ int dev_set_mac_address(struct net_device *dev, struct sockaddr *saddr)
+ {
++#else
++static int set_mac_address(struct net_device *dev, void *saddrIn)
++{
++    struct sockaddr *saddr = saddrIn;
++#endif
+     int res;
+     priv_data_t *priv = dev->priv;
+     IxEthAccMacAddr npeMacAddr;
+@@ -2700,7 +2708,11 @@
+ #ifdef CONFIG_NET_POLL_CONTROLLER
+     ndev->poll_controller = ixp425eth_poll_controller;
+ #endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
+     ndev->set_mac_address = dev_set_mac_address;
++#else
++    ndev->set_mac_address = set_mac_address;
++#endif
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp425-eth-1.2/2.6.14.patch b/recipes/ixp425-eth/ixp425-eth-1.2/2.6.14.patch
new file mode 100644
index 0000000000..57f441c5bc
--- /dev/null
+++ b/recipes/ixp425-eth/ixp425-eth-1.2/2.6.14.patch
@@ -0,0 +1,24 @@
+--- ./ixp425_eth.c	2005-10-01 00:50:45.179775259 -0700
++++ ./ixp425_eth.c	2005-10-01 00:54:10.976725245 -0700
+@@ -777,7 +777,9 @@
+ 	 * before re-using it on the Rx-path
+ 	 */
+         skb->nfmark = 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+ 	skb->nfcache = 0;
++#endif
+         nf_conntrack_put(skb->nfct);
+         skb->nfct = NULL;
+ #ifdef CONFIG_NETFILTER_DEBUG
+@@ -1451,7 +1453,11 @@
+     skb->len -= header_len;
+    
+     /* fill the pkt arrival time (set at the irq callback entry) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+     skb->stamp = irq_stamp;
++#else
++    skb_set_timestamp(skb, &irq_stamp);
++#endif
+  
+     /* fill the input device field */
+     skb->dev = dev;
diff --git a/recipes/ixp425-eth/ixp425-eth-1.2/ixp400linuxethernetdriver-1_2-kernel26_hr_20050929.patch b/recipes/ixp425-eth/ixp425-eth-1.2/ixp400linuxethernetdriver-1_2-kernel26_hr_20050929.patch
new file mode 100644
index 0000000000..e4ef3f96c8
--- /dev/null
+++ b/recipes/ixp425-eth/ixp425-eth-1.2/ixp400linuxethernetdriver-1_2-kernel26_hr_20050929.patch
@@ -0,0 +1,1468 @@
+diff -Naur ixp425_eth.orig/Makefile ixp425_eth/Makefile
+--- ixp425_eth.orig/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ ixp425_eth/Makefile	2005-09-28 19:03:50.000000000 +0200
+@@ -0,0 +1,36 @@
++obj-m := ixp425_eth.o
++
++PWD         := $(shell pwd)
++
++LINUX_SRC := $($(IX_TARGET)_KERNEL_DIR)
++
++OSAL_DIR := $(IX_XSCALE_SW)/../ixp_osal
++CFLAGS_ixp425_eth.o = -DWall \
++          -I$(IX_XSCALE_SW)/src/include \
++          -I$(OSAL_DIR)/ \
++          -I$(OSAL_DIR)/os/linux/include/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/core/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/os/linux/include/core/  \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/os/linux/include/core/ \
++          -I$(OSAL_DIR)/include/ \
++          -I$(OSAL_DIR)/include/modules/ \
++          -I$(OSAL_DIR)/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/include/modules/core/ \
++          -I$(OSAL_DIR)/include/platforms/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/ \
++
++#	-DDEBUG 
++
++# -DDEBUG_DUMP
++
++default:
++	$(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) V=1 -C $(LINUX_SRC) SUBDIRS=$(PWD) modules
++
++clean:
++	rm -f ixp425_eth.ko
+diff -Naur ixp425_eth.orig/Readme-Kernel-2_6-Patch.txt ixp425_eth/Readme-Kernel-2_6-Patch.txt
+--- ixp425_eth.orig/Readme-Kernel-2_6-Patch.txt	1970-01-01 01:00:00.000000000 +0100
++++ ixp425_eth/Readme-Kernel-2_6-Patch.txt	2005-09-28 20:26:19.000000000 +0200
+@@ -0,0 +1,33 @@
++This file describes a patch to use version 1.2 of the ethernet driver
++for Intel Ixp4XX with Linux 2.6 kernels.
++
++Authors/History
++---------------
++
++This patch is based on the nslu2-linux project's patches for version
++1.1 of the same driver. The changes were adapted to version 1.2 by
++Hannes Reich & Cian Masterson.
++
++Status
++------
++
++This code has been tested on a Linksys NSLU2. It works in big-endian
++mode, performance seems around 10% faster than 1.4.
++
++The code does not work in little-endian mode. It appears as though the
++hardware is initialised correctly, but packet receive / transmit done
++callbacks are never called.
++
++The driver has not been tested in "polling mode".
++
++Licence Information
++-------------------
++
++This patch is licenced under the same terms as the original Ethernet
++driver (GPL v2).
++
++References
++----------
++
++The nslu2-linux project's patch for version 1.1 of the driver is at
++http://nslu.sourceforge.net/downloads/ixp425_eth.c.patch
+\ No newline at end of file
+diff -Naur ixp425_eth.orig/ixp425_eth.c ixp425_eth/ixp425_eth.c
+--- ixp425_eth.orig/ixp425_eth.c	2005-08-26 21:44:19.000000000 +0200
++++ ixp425_eth/ixp425_eth.c	2005-09-02 00:01:59.000000000 +0200
+@@ -47,21 +47,18 @@
+  */
+ #include <linux/config.h>
+ #include <linux/module.h>
+-#include <linux/kernel.h>
++#include <linux/moduleparam.h>
+ #include <linux/init.h>
++#include <linux/kernel.h>
+ #include <linux/ioport.h>
++#include <linux/device.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+-#include <linux/delay.h>
+ #include <linux/mii.h>
+-#include <linux/socket.h>
+-#include <linux/cache.h>
+ #include <asm/io.h>
+ #include <asm/errno.h>
+ #include <net/pkt_sched.h>
+ #include <net/ip.h>
+-#include <linux/sysctl.h>
+-#include <linux/unistd.h>
+ 
+ /*
+  * Intel IXP400 Software specific header files
+@@ -93,8 +90,8 @@
+ MODULE_DESCRIPTION("IXP425 NPE Ethernet driver");
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Intel Corporation");
+-#define MODULE_NAME "ixp425_eth"
+-#define MODULE_VERSION "1.2"
++#define DRV_NAME "ixp425_eth"
++#define DRV_VERSION "1.2A"
+ 
+ /* Module parameters */
+ static int npe_learning = 1; /* default : NPE learning & filtering enable */
+@@ -122,26 +119,23 @@
+  */
+ static int netdev_max_backlog = 290;
+ 
+-MODULE_PARM(npe_learning, "i");
++module_param(npe_learning, int, 4);
+ MODULE_PARM_DESC(npe_learning, "If non-zero, NPE MAC Address Learning & Filtering feature will be enabled");
+-MODULE_PARM(log_level, "i");
++module_param(log_level, int, 6);
+ MODULE_PARM_DESC(log_level, "Set log level: 0 - None, 1 - Verbose, 2 - Debug");
+-MODULE_PARM(no_csr_init, "i");
++module_param(no_csr_init, int, 0);
+ MODULE_PARM_DESC(no_csr_init, "If non-zero, do not initialise Intel IXP400 Software Release core components");
+-MODULE_PARM(no_phy_scan, "i");
++module_param(no_phy_scan, int, 0);
+ MODULE_PARM_DESC(no_phy_scan, "If non-zero, use hard-coded phy addresses");
+-MODULE_PARM(datapath_poll, "i");
++module_param(datapath_poll, int, 0);
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+-MODULE_PARM(phy_reset, "i");
++module_param(phy_reset, int, 0);
+ MODULE_PARM_DESC(phy_reset, "If non-zero, reset the phys");
+-MODULE_PARM(netdev_max_backlog, "i");
++module_param(netdev_max_backlog, int, 4);
+ MODULE_PARM_DESC(netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+-MODULE_PARM(dev_max_count, "i");
++module_param(dev_max_count, int, 4);
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+-/* devices will be called ixp0 and ixp1 */
+-#define DEVICE_NAME "ixp"
+-
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
+ #define PHY_SPEED_10    0
+ #define PHY_SPEED_100   1
+@@ -257,36 +251,35 @@
+  */
+ /* Print kernel error */
+ #define P_ERROR(args...) \
+-    printk(KERN_ERR MODULE_NAME ": " args)
++    printk(KERN_ERR DRV_NAME ": " args)
+ /* Print kernel warning */
+ #define P_WARN(args...) \
+-    printk(KERN_WARNING MODULE_NAME ": " args)
++    printk(KERN_WARNING DRV_NAME ": " args)
+ /* Print kernel notice */
+ #define P_NOTICE(args...) \
+-    printk(KERN_NOTICE MODULE_NAME ": " args)
++    printk(KERN_NOTICE DRV_NAME ": " args)
+ /* Print kernel info */
+ #define P_INFO(args...) \
+-    printk(KERN_INFO MODULE_NAME ": " args)
++    printk(KERN_INFO DRV_NAME ": " args)
+ /* Print verbose message. Enabled/disabled by 'log_level' param */
+ #define P_VERBOSE(args...) \
+-    if (log_level >= 1) printk(MODULE_NAME ": " args)
++    if (log_level >= 1) printk(DRV_NAME ": " args)
+ /* Print debug message. Enabled/disabled by 'log_level' param  */
+ #define P_DEBUG(args...) \
+     if (log_level >= 2) { \
+-        printk("%s: %s()\n", MODULE_NAME, __FUNCTION__); \
++        printk("%s: %s()\n", DRV_NAME, __FUNCTION__); \
+         printk(args); }
+ 
+ #ifdef DEBUG
+ /* Print trace message */
+ #define TRACE \
+-    if (log_level >= 2) printk("%s: %s(): line %d\n", MODULE_NAME, __FUNCTION__, __LINE__)
++    if (log_level >= 2) printk("%s: %s(): line %d\n", DRV_NAME, __FUNCTION__, __LINE__)
+ #else
+ /* no trace */
+ #define TRACE 
+ #endif
+ 
+ /* extern Linux kernel data */
+-extern struct softnet_data softnet_data[]; /* used to get the current queue level */
+ extern unsigned long loops_per_jiffy; /* used to calculate CPU clock speed */
+ 
+ /* internal Ethernet Access layer polling entry points */
+@@ -295,10 +288,12 @@
+ extern void 
+ ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++static void ixp425eth_poll_controller(struct net_device *dev);
++#endif
++
+ /* Private device data */
+ typedef struct {
+-    spinlock_t lock;  /* multicast management lock */
+-    
+     unsigned int msdu_size;
+     unsigned int replenish_size;
+     unsigned int pkt_size;
+@@ -338,17 +333,11 @@
+     /* TX MBUF pool */
+     IX_OSAL_MBUF_POOL *tx_pool;
+ 
+-    /* id of thread for the link duplex monitoring */
+-    int maintenanceCheckThreadId;
+-
+-    /* mutex locked by thread, until the thread exits */
+-    struct semaphore *maintenanceCheckThreadComplete;
+-
+-    /* Used to stop the kernel thread for link monitoring. */
+-    volatile BOOL maintenanceCheckStopped;
++    /* link duplex monitoring */
++    struct work_struct mii_job;
+ 
+-    /* used for tx timeout */
+-    struct tq_struct tq_timeout;
++    /* handle tx timeouts */
++    struct work_struct tx_timeout_job;
+ 
+     /* used to control the message output */
+     UINT32 devFlags;
+@@ -370,11 +359,13 @@
+  */
+ 
+ /* values used inside the irq */
++#ifdef IXP425ETH_POLLING_MODE
+ static unsigned long timer_countup_ticks;
++static unsigned int rx_queue_id = IX_QMGR_MAX_NUM_QUEUES;
++#endif
+ static IxQMgrDispatcherFuncPtr dispatcherFunc;
+ static struct timeval  irq_stamp;  /* time of interrupt */
+ static unsigned int maxbacklog = RX_MBUF_POOL_SIZE;
+-static unsigned int rx_queue_id = IX_QMGR_MAX_NUM_QUEUES;
+ 
+ /* Implements a software queue for skbufs 
+  * This queue is written in the tx done process and 
+@@ -523,13 +514,18 @@
+ #endif
+ };
+ 
++/*
++ * Shared workqueue thread for device maintenance tasks.
++ */
++static struct workqueue_struct *npe_eth_workqueue;
++
+ /* Mutex lock used to coordinate access to IxEthAcc functions
+  * which manipulate the MII registers on the PHYs
+  */
+-static struct semaphore *miiAccessMutex;
++static DECLARE_MUTEX(miiAccessMutex);
+ 
+ /* mutex locked when maintenance is being performed */
+-static struct semaphore *maintenance_mutex;
++static DECLARE_MUTEX(maintenance_mutex);
+ 
+ /* Flags which is set when the corresponding IRQ is running,
+  */
+@@ -592,7 +588,7 @@
+     printk(">> mbuf:\n");
+     hex_dump(mbuf, sizeof(*mbuf));
+     printk(">> m_data:\n");
+-    hex_dump(__va(IX_OSAL_MBUF_MDATA(mbuf)), IX_OSAL_MBUF_MLEN(mbuf));
++    hex_dump(IX_OSAL_MBUF_MDATA(mbuf), IX_OSAL_MBUF_MLEN(mbuf));
+     printk("\n-------------------------\n");
+ }
+ 
+@@ -791,6 +787,8 @@
+ #ifdef CONFIG_NETFILTER
+ #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
+ /* We need to free the memory attached to the nf_bridge pointer to avoid a memory leak */
++	 nf_bridge_put(skb->nf_bridge);
++        skb->nf_bridge = NULL;
+ 
+ #endif
+ #endif /* CONFIG_NETFILTER */
+@@ -1041,135 +1039,63 @@
+  * KERNEL THREADS
+  */
+ 
+-/* flush the pending signals for a thread and 
+- * check if a thread is killed  (e.g. system shutdown)
+- */
+-static BOOL dev_thread_signal_killed(void)
+-{
+-    int killed = FALSE;
+-    if (signal_pending (current))
+-    {
+-	spin_lock_irq(&current->sigmask_lock);
+-	if (sigismember(&(current->pending.signal), SIGKILL)
+-	    || sigismember(&(current->pending.signal), SIGTERM))
+-	{
+-	    /* someone kills this thread */
+-	    killed = TRUE;
+-	}
+-	flush_signals(current);
+-	spin_unlock_irq(&current->sigmask_lock);
+-    }
+-    return killed;
+-}
+-
+-/* This timer will check the PHY for the link duplex and
++/* This workqueue job will check the PHY for the link duplex and
+  * update the MAC accordingly. It also executes some buffer
+  * maintenance to release mbuf in excess or replenish after
+  * a severe starvation
+  *
+  * This function loops and wake up every 3 seconds.
+  */
+-static int dev_media_check_thread (void* arg)
++static void dev_media_check_work (void* arg)
+ {
+     struct net_device *dev = (struct net_device *) arg;
+     priv_data_t *priv = dev->priv;
+-    int linkUp;
+-    int speed100;
+-    int fullDuplex = -1; /* unknown duplex mode */
+-    int newDuplex;
+-    int autonegotiate;
+-    unsigned phyNum = phyAddresses[priv->port_id];
+-    int res;
+ 
+-    TRACE;
+ 
+-    /* Lock the mutex for this thread.
+-       This mutex can be used to wait until the thread exits
+-    */
+-    down (priv->maintenanceCheckThreadComplete);
+-
+-    daemonize();
+-    reparent_to_init();
+-    spin_lock_irq(&current->sigmask_lock);
+-    sigemptyset(&current->blocked);
+-    recalc_sigpending(current);
+-    spin_unlock_irq(&current->sigmask_lock);
+-    
+-    snprintf(current->comm, sizeof(current->comm), "ixp425 %s", dev->name);
++    /*
++     * Determine the link status
++     */
+ 
+-    TRACE;
+-    
+-    while (1)
++    if (default_phy_cfg[priv->port_id].linkMonitor)
+     {
+-	/* We may have been woken up by a signal. If so, we need to
+-	 * flush it out and check for thread termination 
+-	 */ 
+-	if (dev_thread_signal_killed())
+-	{
+-	    priv->maintenanceCheckStopped = TRUE;
+-	}
+-
+-	/* If the interface is down, or the thread is killed,
+-	 * or gracefully aborted, we need to exit this loop
+-	 */
+-	if (priv->maintenanceCheckStopped)
+-	{
+-	    break;
+-	}
+-	
+-	/*
+-	 * Determine the link status
+-	 */
++	int linkUp;
++	int speed100;
++	int fullDuplex = -1; /* unknown duplex mode */
++	int newDuplex;
++	int autonegotiate;
++	unsigned phyNum = phyAddresses[priv->port_id];
++	int res;
+ 
+ 	TRACE;
+ 
+-	if (default_phy_cfg[priv->port_id].linkMonitor)
+-	{
+-	    /* lock the MII register access mutex */
+-	    down(miiAccessMutex);
++	/* lock the MII register access mutex */
++	down(&miiAccessMutex);
+ 	    
+-	    res = ixEthMiiLinkStatus(phyNum,
+-				     &linkUp,
+-				     &speed100,
+-				     &newDuplex, 
+-				     &autonegotiate);
+-	    /* release the MII register access mutex */
+-	    up(miiAccessMutex);
+-
+-	    /* We may have been woken up by a signal. If so, we need to
+-	     * flush it out and check for thread termination 
+-	     */ 
+-	    if (dev_thread_signal_killed())
+-	    {
+-		priv->maintenanceCheckStopped = TRUE;
+-	    }
++	res = ixEthMiiLinkStatus(phyNum,
++				 &linkUp,
++				 &speed100,
++				 &newDuplex, 
++				 &autonegotiate);
++	/* release the MII register access mutex */
++	up(&miiAccessMutex);
++
++	if (res != IX_ETH_ACC_SUCCESS)
++	{
++	    P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
++		   "\tCan't determine\nthe auto negotiated parameters. "
++		   "Using default values.\n",
++		   phyNum); 
++            /* this shouldn't happen. exit the thread if it does */
++            goto out;
++	}
+ 	    
+-	    /* If the interface is down, or the thread is killed,
+-	     * or gracefully aborted, we need to exit this loop
+-	     */
+-	    if (priv->maintenanceCheckStopped)
+-	    {
+-		break;
+-	    }
+-	
+-	    if (res != IX_ETH_ACC_SUCCESS)
++	if (linkUp)
++	{
++	    if (! netif_carrier_ok(dev))
+ 	    {
+-		P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
+-		       "\tCan't determine\nthe auto negotiated parameters. "
+-		       "Using default values.\n",
+-		       phyNum); 
+-		/* something is bad, gracefully stops the loop */
+-		priv->maintenanceCheckStopped = TRUE;
+-		break;
++		/* inform the kernel of a change in link state */
++		netif_carrier_on(dev);
+ 	    }
+-	    
+-	    if (linkUp)
+-	    {
+-		if (! netif_carrier_ok(dev))
+-		{
+-		    /* inform the kernel of a change in link state */
+-		    netif_carrier_on(dev);
+-		}
+ 
+ 		/*
+ 		 * Update the MAC mode to match the PHY mode if 
+@@ -1218,18 +1144,14 @@
+ 	 * long
+ 	 */
+ 	dev_buff_maintenance(dev);
+-    
+-	/* Now sleep for 3 seconds */
+-	current->state = TASK_INTERRUPTIBLE;
+-	schedule_timeout(MEDIA_CHECK_INTERVAL);
+-    } /* while (1) ... */
+-
+-    /* free the mutex for this thread. */
+-    up (priv->maintenanceCheckThreadComplete);
+-
+-    return 0;
++	/* reschedule to run in 3 seconds */
++	queue_delayed_work(npe_eth_workqueue, &priv->mii_job, 3*HZ);
++out:
++	return;
+ }
+ 
++#ifdef IXP425ETH_POLLING_MODE
++
+ /*
+  * TIMERS
+  *
+@@ -1263,12 +1185,14 @@
+     restore_flags(flags);
+ }
+ 
++#endif /* IXP425ETH_POLLING_MODE */
++
+ /* Internal ISR : run a few thousand times per second and calls 
+  * the queue manager dispatcher entry point.
+  */
+-static void dev_qmgr_os_isr(int irg, void *dev_id, struct pt_regs *regs)
++static irqreturn_t dev_qmgr_os_isr(int irg, void *dev_id, struct pt_regs *regs)
+ {
+-    int qlevel = softnet_data[0].input_pkt_queue.qlen;
++    int qlevel = __get_cpu_var(softnet_data).input_pkt_queue.qlen;
+ 
+     /* at the interrupt entry, the queue contains already a few entries 
+      * so it is safe to decrease the number of entries
+@@ -1302,14 +1226,17 @@
+ 
+     /* call the queue manager entry point */
+     dispatcherFunc(IX_QMGR_QUELOW_GROUP);
++    return IRQ_HANDLED;
+ }
+ 
++#ifdef IXP425ETH_POLLING_MODE
++
+ /* Internal ISR : run a few thousand times per second and calls 
+  * the ethernet entry point.
+  */
+-static void dev_poll_os_isr(int irg, void *dev_id, struct pt_regs *regs)
++static irqreturn_t dev_poll_os_isr(int irg, void *dev_id, struct pt_regs *regs)
+ {
+-    int qlevel = softnet_data[0].input_pkt_queue.qlen;
++    int qlevel = __get_cpu_var(softnet_data).input_pkt_queue.qlen;
+     dev_pmu_timer_restart(); /* set up the timer for the next interrupt */
+ 
+     /* at the interrupt entry, the queue contains already a few entries 
+@@ -1346,6 +1273,7 @@
+     ixEthRxFrameQMCallback(rx_queue_id,0);
+     ixEthTxFrameDoneQMCallback(0,0);
+    
++    return IRQ_HANDLED;
+ }
+ 
+ /* initialize the PMU timer */
+@@ -1400,46 +1328,33 @@
+     restore_flags(flags);
+ }
+ 
+-/* This timer will call ixEthDBDatabaseMaintenance every
+- * IX_ETH_DB_MAINTENANCE_TIME jiffies
+- */
+-static void maintenance_timer_cb(unsigned long data);
+-
+-static struct timer_list maintenance_timer = {
+-    function:&maintenance_timer_cb
+-};
++#endif /* IXP425ETH_POLLING_MODE */
+ 
+-static void maintenance_timer_task(void *data);
+ 
+-/* task spawned by timer interrupt for EthDB maintenance */
+-static struct tq_struct tq_maintenance = {
+-  routine:maintenance_timer_task
+-};
++static void db_maintenance_code(void *data);
++static DECLARE_WORK(db_maintenance_job, db_maintenance_code, NULL);
+ 
+-static void maintenance_timer_set(void)
++static inline
++void schedule_db_maintenance(void)
+ {
+-    maintenance_timer.expires = jiffies + DB_MAINTENANCE_TIME;
+-    add_timer(&maintenance_timer);
++    queue_delayed_work(npe_eth_workqueue, &db_maintenance_job,
++                       DB_MAINTENANCE_TIME);
+ }
+ 
+-static void maintenance_timer_clear(void)
++static inline
++void cancel_db_maintenance(void)
+ {
+-    del_timer_sync(&maintenance_timer);
++    cancel_delayed_work(&db_maintenance_job);
+ }
+ 
+-static void maintenance_timer_task(void *data)
++static void db_maintenance_code(void *data)
+ {
+-    down(maintenance_mutex);
++    down(&maintenance_mutex);
+     ixEthDBDatabaseMaintenance();
+-    up(maintenance_mutex);
++    up(&maintenance_mutex);
++    schedule_db_maintenance();
+ }
+ 
+-static void maintenance_timer_cb(unsigned long data)
+-{
+-    schedule_task(&tq_maintenance);
+-
+-    maintenance_timer_set();
+-}
+ 
+ /*
+  *  DATAPLANE
+@@ -1553,7 +1468,7 @@
+ 	 * and its constants are taken from the eth_type_trans()
+ 	 * function.
+ 	 */
+-	struct ethhdr *eth = skb->mac.ethernet;
++	struct ethhdr *eth = eth_hdr(skb);
+ 	unsigned short hproto = ntohs(eth->h_proto);
+ 	
+ 	if (hproto >= 1536)
+@@ -1595,7 +1510,7 @@
+ 	     * mode is set This costs
+ 	     * a lookup inside the packet payload.
+ 	     */
+-	    struct ethhdr *eth = skb->mac.ethernet;
++	    struct ethhdr *eth = eth_hdr(skb);
+ 	    unsigned char *hdest = eth->h_dest;
+ 	    
+ 	    if (memcmp(hdest, dev->dev_addr, ETH_ALEN)!=0)
+@@ -1654,7 +1569,7 @@
+     dev = (struct net_device *)callbackTag;
+     priv = dev->priv;
+ 
+-    qlevel = softnet_data[0].input_pkt_queue.qlen;
++    qlevel = __get_cpu_var(softnet_data).input_pkt_queue.qlen;
+     /* check if the system accepts more traffic and
+      * against chained mbufs 
+      */
+@@ -1754,10 +1669,6 @@
+ 
+     TRACE;
+ 
+-    /* if called from irq handler, lock already acquired */
+-    if (!in_irq())
+-	spin_lock_irq(&priv->lock);
+-
+     /* clear multicast addresses that were set the last time (if exist) */
+     ixEthAccPortMulticastAddressLeaveAll (priv->port_id);
+ 
+@@ -1838,10 +1749,10 @@
+     }
+ 
+ Exit:
+-    if (!in_irq())
+-	spin_unlock_irq(&priv->lock);
++    return;
+ }
+ 
++#ifdef IXP425ETH_POLLING_MODE
+ /* The QMgr dispatch entry point can be called from the 
+  * IX_OSAL_IXP400_QM1_IRQ_LVL irq (which will trigger
+  * an interrupt for every packet) or a timer (which will
+@@ -1893,8 +1804,8 @@
+     /* poll the datapath from a timer IRQ */
+     if (request_irq(IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL,
+                     dev_poll_os_isr,
+-                    SA_SHIRQ,
+-                    MODULE_NAME,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
++                    DRV_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+         P_ERROR("Failed to reassign irq to PMU timer interrupt!\n");
+@@ -1918,6 +1829,8 @@
+   return 0;
+ }
+ 
++#endif /* IXP425ETH_POLLING_MODE */
++
+ /* Enable the MAC port.
+  * Called on do_dev_open, dev_tx_timeout and mtu size changes
+  */
+@@ -1946,23 +1859,6 @@
+ 	return convert_error_ethAcc(res);	
+     }
+ 
+-    /* restart the link-monitoring thread if necessary */
+-    if (priv->maintenanceCheckStopped)
+-    {
+-	/* Starts the driver monitoring thread, if configured */
+-	priv->maintenanceCheckStopped = FALSE;
+-	
+-	priv->maintenanceCheckThreadId = 
+-	    kernel_thread(dev_media_check_thread,
+-			  (void *) dev,
+-			  CLONE_FS | CLONE_FILES);
+-	if (priv->maintenanceCheckThreadId < 0)
+-	{
+-	    P_ERROR("%s: Failed to start thread for media checks\n", dev->name);
+-	    priv->maintenanceCheckStopped = TRUE;
+-	}
+-    }
+-
+     /* force replenish if necessary */
+     dev_rx_buff_prealloc(priv);
+ 
+@@ -2019,38 +1915,11 @@
+ static void port_disable(struct net_device *dev)
+ {
+     priv_data_t *priv = dev->priv;
+-    int res;
+     IX_STATUS status;
+ 
+     P_DEBUG("port_disable(%s)\n", dev->name);
+ 
+-    if (!netif_queue_stopped(dev))
+-    {
+-        dev->trans_start = jiffies;
+-        netif_stop_queue(dev);
+-    }
+-
+-    if (priv->maintenanceCheckStopped)
+-    {
+-	/* thread is not running */
+-    }
+-    else
+-    {
+-	/* thread is running */
+-	priv->maintenanceCheckStopped = TRUE;
+-	/* Wake up the media-check thread with a signal.
+-	   It will check the 'running' flag and exit */
+-	if ((res = kill_proc (priv->maintenanceCheckThreadId, SIGKILL, 1)))
+-	{
+-	    P_ERROR("%s: unable to signal thread\n", dev->name);
+-	}
+-	else
+-	{
+-	    /* wait for the thread to exit. */
+-	    down (priv->maintenanceCheckThreadComplete);
+-	    up (priv->maintenanceCheckThreadComplete);
+-	}
+-    }
++    netif_stop_queue(dev);
+ 
+     /* Set callbacks when port is disabled */
+     ixEthAccPortTxDoneCallbackRegister(priv->port_id, 
+@@ -2100,7 +1969,6 @@
+             ixEthAccPortTxDoneCallbackRegister(priv->port_id, 
+                                                tx_done_queue_stopped_cb,
+                                                (UINT32)dev);
+-            dev->trans_start = jiffies;
+             netif_stop_queue (dev);
+         }
+ 	return 0;
+@@ -2143,12 +2011,19 @@
+     int res;
+ 
+     /* prevent the maintenance task from running while bringing up port */
+-    down(maintenance_mutex);
++    down(&maintenance_mutex);
+ 
+     /* bring up the port */
+     res = port_enable(dev);
+ 
+-    up(maintenance_mutex);
++    up(&maintenance_mutex);
++
++    if(!res)
++    {
++	/* schedule mii job to run in 3 seconds */
++	priv_data_t *priv = dev->priv;	
++	queue_delayed_work(npe_eth_workqueue, &priv->mii_job, 3*HZ);
++    }
+ 
+     return res;
+ }
+@@ -2158,28 +2033,34 @@
+  */
+ static int do_dev_stop(struct net_device *dev)
+ {
++    priv_data_t *priv = dev->priv;
++
+     TRACE;
+ 
++    cancel_delayed_work(&priv->mii_job);
++    cancel_delayed_work(&priv->tx_timeout_job);
++    netif_stop_queue(dev);
++    netif_carrier_off(dev);
+     /* prevent the maintenance task from running while bringing up port */
+-    down(maintenance_mutex);
++    down(&maintenance_mutex);
+ 
+     /* bring the port down */
+     port_disable(dev);
+ 
+-    up(maintenance_mutex);
++    up(&maintenance_mutex);
+ 
+     return 0;
+ }
+ 
+ static void
+-dev_tx_timeout_task(void *dev_id)
++dev_tx_timeout_work(void *arg)
+ {
+-    struct net_device *dev = (struct net_device *)dev_id;
++    struct net_device *dev = (struct net_device *)arg;
+     priv_data_t *priv = dev->priv;
+ 
+     P_WARN("%s: Tx Timeout for port %d\n", dev->name, priv->port_id);
+ 
+-    down(maintenance_mutex);
++    down(&maintenance_mutex);
+     port_disable(dev);
+ 
+     /* Note to user: Consider performing other reset operations here
+@@ -2202,7 +2083,7 @@
+ 	port_enable(dev);
+     }
+ 
+-    up(maintenance_mutex);
++    up(&maintenance_mutex);
+ }
+ 
+ 
+@@ -2212,8 +2093,7 @@
+     priv_data_t *priv = dev->priv;
+ 
+     TRACE;
+-    schedule_task(&priv->tq_timeout);
+-    
++    queue_work(npe_eth_workqueue, &priv->tx_timeout_job);
+ }
+ 
+ /* update the maximum msdu value for this device */
+@@ -2270,14 +2150,14 @@
+     }
+ 
+     /* safer to stop maintenance task while bringing port down and up */
+-    down(maintenance_mutex);
++    down(&maintenance_mutex);
+ 
+     if (ixEthDBFilteringPortMaximumFrameSizeSet(priv->port_id, 
+ 						new_msdu_size))
+     {
+ 	P_ERROR("%s: ixEthDBFilteringPortMaximumFrameSizeSet failed for port %d\n",
+ 		dev->name, priv->port_id);
+-	up(maintenance_mutex);
++	up(&maintenance_mutex);
+ 
+ 	return -1;
+     }
+@@ -2287,7 +2167,7 @@
+     /* update the driver mtu value */
+     dev->mtu = new_mtu_size;
+ 
+-    up(maintenance_mutex);
++    up(&maintenance_mutex);
+ 
+     return 0;
+ }
+@@ -2316,27 +2196,27 @@
+         /* Read MII PHY register */
+ 	case SIOCGMIIREG:		
+ 	case SIOCDEVPRIVATE+1:
+-	    down (miiAccessMutex);     /* lock the MII register access mutex */
++	    down (&miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out)))
+ 	    {
+ 		P_ERROR("Error reading MII reg %d on phy %d\n",
+ 		       data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+-	    up (miiAccessMutex);	/* release the MII register access mutex */
++	    up (&miiAccessMutex);	/* release the MII register access mutex */
+ 	    return res;
+ 
+ 	/* Write MII PHY register */
+ 	case SIOCSMIIREG:
+ 	case SIOCDEVPRIVATE+2:
+-	    down (miiAccessMutex);     /* lock the MII register access mutex */
++	    down (&miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in)))
+ 	    {
+ 		P_ERROR("Error writing MII reg %d on phy %d\n",
+                         data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+-	    up (miiAccessMutex);	/* release the MII register access mutex */
++	    up (&miiAccessMutex);	/* release the MII register access mutex */
+ 	    return res;
+ 
+ 	/* set the MTU size */
+@@ -2373,7 +2253,7 @@
+ 
+     TRACE;
+ 
+-    invalidate_dcache_range((unsigned int)&ethStats, sizeof(ethStats));
++    IX_ACC_DATA_CACHE_INVALIDATE(&ethStats, sizeof(ethStats));
+     if ((res = ixEthAccMibIIStatsGetClear(priv->port_id, &ethStats)))
+     {
+ 	P_ERROR("%s: ixEthAccMibIIStatsGet failed for port %d, res = %d\n",
+@@ -2462,8 +2342,8 @@
+      */
+     if (request_irq(IX_OSAL_IXP400_QM1_IRQ_LVL,
+                     dev_qmgr_os_isr,
+-                    SA_SHIRQ,
+-                    MODULE_NAME,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
++                    DRV_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+         P_ERROR("Failed to request_irq to Queue Manager interrupt!\n");
+@@ -2582,15 +2462,6 @@
+     BOOL physcan[IXP425_ETH_ACC_MII_MAX_ADDR];
+     int i, phy_found, num_phys_to_set, dev_count;
+ 
+-    /* initialise the MII register access mutex */
+-    miiAccessMutex = (struct semaphore *) kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+-    if (!miiAccessMutex)
+-	return -ENOMEM;
+-
+-    init_MUTEX(miiAccessMutex);
+-
+-    TRACE;
+-
+     /* detect the PHYs (ethMii requires the PHYs to be detected) 
+      * and provides a maximum number of PHYs to search for.
+      */
+@@ -2680,8 +2551,8 @@
+ 	if (port_id == IX_ETH_PORT_1) npe_id = "B";
+ 	if (port_id == IX_ETH_PORT_2) npe_id = "C";
+ 
+-	P_INFO("%s%d is using NPE%s and the PHY at address %d\n",
+-	       DEVICE_NAME, dev_count, npe_id, phyAddresses[port_id]);
++	P_INFO("npe%d is using NPE%s and the PHY at address %d\n",
++	       dev_count, npe_id, phyAddresses[port_id]);
+ 
+ 	/* Set the MAC to the same duplex mode as the phy */
+ 	ixEthAccPortDuplexModeSet(port_id,
+@@ -2693,12 +2564,11 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
+-int dev_set_mac_address(struct net_device *dev, void *addr)
++int dev_set_mac_address(struct net_device *dev, struct sockaddr *saddr)
+ {
+     int res;
+     priv_data_t *priv = dev->priv;
+     IxEthAccMacAddr npeMacAddr;
+-    struct sockaddr *saddr = (struct sockaddr *)addr;
+ 
+     /* Get MAC addr from parameter */
+     memcpy(&npeMacAddr.macAddress,
+@@ -2758,7 +2628,7 @@
+ 
+ static struct Qdisc_ops dev_qdisc_ops =
+ {
+-	NULL, NULL, "ixp425_eth", 0,
++	NULL, NULL, DRV_NAME, 0,
+ 	dev_qdisc_no_enqueue, 
+ 	dev_qdisc_no_dequeue,
+ 	dev_qdisc_no_enqueue, 
+@@ -2771,35 +2641,13 @@
+ /* Initialize device structs.
+  * Resource allocation is deffered until do_dev_open
+  */
+-static int __devinit dev_eth_probe(struct net_device *dev)
++static int __devinit dev_eth_probe(struct device *dev)
+ {
+-    static int found_devices = 0;
+-    priv_data_t *priv;
+-
+-    TRACE;
+-
+-    /* there is a limited number of devices */
+-    if (found_devices >= dev_max_count) /* module parameter */
+-	return -ENODEV;
+-
+-    SET_MODULE_OWNER(dev);
+-
+-    /* set device name */
+-    strcpy(dev->name, found_devices ? DEVICE_NAME "1" : DEVICE_NAME "0");
+-
+-    /* allocate and initialize priv struct */
+-    priv = dev->priv = kmalloc(sizeof(priv_data_t), GFP_KERNEL);
+-    if (dev->priv == NULL)
+-	return -ENOMEM;
+-
+-    memset(dev->priv, 0, sizeof(priv_data_t));
+-
+-    TRACE;
+-
+-    /* set the mapping between port ID and devices 
+-     * 
+-     */
+-    priv->port_id  = default_portId[found_devices];
++    int res = -ENOMEM;
++    struct platform_device *pdev = to_platform_device(dev);
++    struct net_device *ndev = dev_get_drvdata(dev);
++    priv_data_t *priv = (priv_data_t*)ndev->priv;
++    priv->port_id  = pdev->id;
+ 
+     TRACE;
+ 
+@@ -2809,9 +2657,8 @@
+     if(priv->rx_pool == NULL)
+     {
+ 	P_ERROR("%s: Buffer RX Pool init failed on port %d\n",
+-		dev->name, priv->port_id);
+-	kfree(dev->priv);
+-	return -ENOMEM;
++		ndev->name, priv->port_id);
++	goto out;
+     }
+ 
+     TRACE;
+@@ -2822,45 +2669,38 @@
+     if(priv->tx_pool == NULL)
+     {
+ 	P_ERROR("%s: Buffer TX Pool init failed on port %d\n",
+-		dev->name, priv->port_id);
+-	kfree(dev->priv);
+-	return -ENOMEM;
++		ndev->name, priv->port_id);
++	goto out;
+     }
+ 
+-     TRACE;
++    TRACE;
+ 
+-   /* initialise the MII register access mutex */
+-    priv->maintenanceCheckThreadComplete = (struct semaphore *)
+-	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+-    if (!priv->maintenanceCheckThreadComplete)
+-    {
+-	kfree(dev->priv);
+-	return -ENOMEM;
+-    }
+-    priv->lock = SPIN_LOCK_UNLOCKED;
+-    init_MUTEX(priv->maintenanceCheckThreadComplete);
+-    priv->maintenanceCheckStopped = TRUE;
+-
+-    /* initialize ethernet device (default handlers) */
+-    ether_setup(dev);
++    /* initialise the MII and tx timeout jobs */
++    INIT_WORK(&priv->mii_job, dev_media_check_work, ndev);
++    INIT_WORK(&priv->tx_timeout_job, dev_tx_timeout_work, ndev);
+ 
+     TRACE;
+ 
+-     /* fill in dev struct callbacks with customized handlers */
+-    dev->open = do_dev_open;
+-    dev->stop = do_dev_stop;
++    /* initialize ethernet device (default handlers) */
++    ether_setup(ndev);
+ 
+-    dev->hard_start_xmit = dev_hard_start_xmit;
++     /* fill in dev struct callbacks with customized handlers */
++    ndev->open = do_dev_open;
++    ndev->stop = do_dev_stop;
+ 
+-    dev->watchdog_timeo = DEV_WATCHDOG_TIMEO;
+-    dev->tx_timeout = dev_tx_timeout;
+-    dev->change_mtu = dev_change_mtu;
+-    dev->do_ioctl = do_dev_ioctl;
+-    dev->get_stats = dev_get_stats;
+-    dev->set_multicast_list = dev_set_multicast_list;
+-    dev->flags |= IFF_MULTICAST;
++    ndev->hard_start_xmit = dev_hard_start_xmit;
+ 
+-    dev->set_mac_address = dev_set_mac_address;
++    ndev->watchdog_timeo = DEV_WATCHDOG_TIMEO;
++    ndev->tx_timeout = dev_tx_timeout;
++    ndev->change_mtu = dev_change_mtu;
++    ndev->do_ioctl = do_dev_ioctl;
++    ndev->get_stats = dev_get_stats;
++    ndev->set_multicast_list = dev_set_multicast_list;
++    ndev->flags |= IFF_MULTICAST;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++    ndev->poll_controller = ixp425eth_poll_controller;
++#endif
++    ndev->set_mac_address = dev_set_mac_address;
+ 
+     TRACE;
+ 
+@@ -2878,22 +2718,22 @@
+      *
+      */
+ 
+-    memcpy(dev->dev_addr, 
++    memcpy(ndev->dev_addr, 
+ 	   &default_mac_addr[priv->port_id].macAddress,
+ 	   IX_IEEE803_MAC_ADDRESS_SIZE);
+ 
+     /* possibly remove this test and the message when a valid MAC address 
+      * is not hardcoded in the driver source code. 
+      */
+-    if (is_valid_ether_addr(dev->dev_addr))
++    if (is_valid_ether_addr(ndev->dev_addr))
+     {
+ 	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
+-	       (unsigned)dev->dev_addr[0],
+-	       (unsigned)dev->dev_addr[1],
+-	       (unsigned)dev->dev_addr[2],
+-	       (unsigned)dev->dev_addr[3],
+-	       (unsigned)dev->dev_addr[4],
+-	       (unsigned)dev->dev_addr[5],
++	       (unsigned)ndev->dev_addr[0],
++	       (unsigned)ndev->dev_addr[1],
++	       (unsigned)ndev->dev_addr[2],
++	       (unsigned)ndev->dev_addr[3],
++	       (unsigned)ndev->dev_addr[4],
++	       (unsigned)ndev->dev_addr[5],
+ 	       priv->port_id);
+     }
+     
+@@ -2903,62 +2743,132 @@
+      */
+     TRACE;
+ 
+-    dev_change_msdu(dev, dev->mtu + dev->hard_header_len + VLAN_HDR);
+-
+-    priv->tq_timeout.routine = dev_tx_timeout_task;
+-    priv->tq_timeout.data = (void *)dev;
++    dev_change_msdu(ndev, ndev->mtu + ndev->hard_header_len + VLAN_HDR);
+ 
+ #ifdef CONFIG_IXP425_ETH_QDISC_ENABLED
+     /* configure and enable a fast TX queuing discipline */
+     TRACE;
+ 
+-    priv->qdisc = qdisc_create_dflt(dev, &dev_qdisc_ops);
+-    dev->qdisc_sleeping = priv->qdisc;
+-    dev->qdisc = priv->qdisc;
++    priv->qdisc = qdisc_create_dflt(ndev, &dev_qdisc_ops);
++    ndev->qdisc_sleeping = priv->qdisc;
++    ndev->qdisc = priv->qdisc;
+     
+-    if (!dev->qdisc_sleeping)
++    if (!ndev->qdisc_sleeping)
+     {
+ 	P_ERROR("%s: qdisc_create_dflt failed on port %d\n",
+-		dev->name, priv->port_id);
+-	kfree(dev->priv);
+-	return -ENOMEM;
++		ndev->name, priv->port_id);
++	goto out;
+     }
+ #endif
+ 
+     /* set the internal maximum queueing capabilities */
+-    dev->tx_queue_len = TX_MBUF_POOL_SIZE;
++    ndev->tx_queue_len = TX_MBUF_POOL_SIZE;
+ 
+-    if (!netif_queue_stopped(dev))
+-    {
+-	TRACE;
++    if ((res = register_netdev(ndev)))
++        P_ERROR("Failed to register netdev. res = %d\n", res);
++out:
++    return res;
++}
+ 
+-        dev->trans_start = jiffies;
+-        netif_stop_queue(dev);
+-    }
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling receive - used by netconsole and other diagnostic tools
++ * to allow network i/o with interrupts disabled.
++ * (stolen from 8139too.c by siddy)
++ */
++static void ixp425eth_poll_controller(struct net_device *dev)
++{
++        disable_irq(dev->irq);
++        dev_qmgr_os_isr(dev->irq, dev, NULL);
++        enable_irq(dev->irq);
++}
++#endif
+ 
+-    found_devices++;
++static int __devinit npe_eth_init_device(struct device *dev)
++{
++    int res = -ENOMEM;
++    int ixRes = 0;
++    struct platform_device *pdev = to_platform_device(dev);
++    struct net_device *ndev = alloc_etherdev(sizeof(priv_data_t));
++    if (ndev == NULL) {
++        P_ERROR("could not allocate device.\n");
++        goto out;
++    }
++    SET_MODULE_OWNER(ndev);
++    SET_NETDEV_DEV(ndev, dev);
++    ixEthAccTxSchedulingDisciplineSet(pdev->id, FIFO_NO_PRIORITY);
++    dev_set_drvdata(dev, ndev);
++    res = dev_eth_probe(dev);
++    if (res == 0) {
++        /* This was added in v0.1.8 of the driver. It seems that we need to
++         * enable the port before the user can set a mac address for the port
++         * using 'ifconfig hw ether ...'. To enable the port we must first
++         * register Q callbacks, so we register the portDisable callbacks to
++         * ensure that no buffers are passed up to the kernel until the port is
++         * brought up properly (ifconfig up)
++         */
++        if ((ixRes = ixEthAccPortTxDoneCallbackRegister(pdev->id, 
++						      tx_done_disable_cb,
++						      (UINT32)dev)))
+ 
+-    TRACE;
++	{
++	    TRACE;
++	    res = convert_error_ethAcc(ixRes);
++	    goto out;
++	}
++        if ((ixRes = ixEthAccPortRxCallbackRegister(pdev->id, 
++						  rx_disable_cb, 
++						  (UINT32)dev)))
++	{
++	    TRACE;
++	    res = convert_error_ethAcc(ixRes);
++	    goto out;
++	}
++        port_enable(ndev);
++    } else {
++        dev_set_drvdata(dev, NULL);
++        kfree(ndev);
++    }
++out:
++    return res;
++}
+ 
++static int __devexit npe_eth_fini_device(struct device *dev)
++{
++    struct net_device *ndev = dev_get_drvdata(dev);
++    dev_set_drvdata(dev, NULL);
++    unregister_netdev(ndev);
++    kfree(ndev);
+     return 0;
+ }
+ 
+-
+ /* Module initialization and cleanup */
+ 
+ #ifdef MODULE
+ 
+-static struct net_device ixp425_devices[IX_ETH_ACC_NUMBER_OF_PORTS];
++static struct device_driver npe_eth_driver = {
++    .name       = DRV_NAME,
++    .bus        = &platform_bus_type,
++    .probe      = npe_eth_init_device,
++    .remove     = npe_eth_fini_device,
++};
+ 
+-int init_module(void)
+-{
+-    int res, dev_count;
+-    IxEthAccPortId portId;
+-    struct net_device *dev;
++static struct platform_device npe_eth_devs[] = {
++    {
++        .name   = DRV_NAME,
++        .id     = IX_ETH_PORT_1,
++    },
++    {
++        .name   = DRV_NAME,
++        .id     = IX_ETH_PORT_2,
++    }
++};
+ 
+-    TRACE;
++static int __init ixp425_eth_init(void)
++{
++    int res;
+ 
+-    P_INFO("Initializing IXP425 NPE Ethernet driver software v. " MODULE_VERSION " \n");
++    P_INFO("Initializing IXP425 NPE Ethernet driver software v. " DRV_VERSION " \n");
+ 
+     TRACE;
+ 
+@@ -3037,82 +2947,16 @@
+ 
+     TRACE;
+ 
+-    /* Initialise the driver structure */
+-    for (dev_count = 0; 
+-	 dev_count < dev_max_count;  /* module parameter */
+-	 dev_count++)
+-    {
+-	portId = default_portId[dev_count];
+-
+-	dev = &ixp425_devices[dev_count];
+-
+-	dev->init = dev_eth_probe;
+-
+-        TRACE;
+-
+-	if ((res = register_netdev(dev)))
+-	{
+-	    TRACE;
+-
+-	    P_ERROR("Failed to register netdev. res = %d\n", res);
+-	    return res;
+-	}
+-
+-        TRACE;
+-
+-	/* register "safe" callbacks. This ensure that no traffic will be 
+-	 * sent to the stack until the port is brought up (ifconfig up)
+-	 */
+-        if ((res = ixEthAccPortTxDoneCallbackRegister(portId, 
+-						      tx_done_disable_cb,
+-						      (UINT32)dev)))
+-
+-	{
+-	    TRACE;
+-	    return convert_error_ethAcc(res);
+-	}
+-        if ((res = ixEthAccPortRxCallbackRegister(portId, 
+-						  rx_disable_cb, 
+-						  (UINT32)dev)))
+-	{
+-	    TRACE;
+-	    return convert_error_ethAcc(res);
+-	}
+-    }
+-
+-    TRACE;
+-
+-    if (no_csr_init == 0 && datapath_poll != 0 ) /* module parameter */
+-    {
+-      /* The QMgr dispatch entry point is called from the 
+-       * IX_OSAL_IXP400_QM1_IRQ_LVL irq (which will trigger
+-       * an interrupt for every packet)
+-       * This function setup the datapath in polling mode
+-       * for better performances.
+-       */
+-
+-        if ((res = ethAcc_datapath_poll_setup()))
+-	{
+-	    TRACE;
+-	    return res;
+-	}
+-    }
+-
+-    TRACE;
+-
+-    /* initialise the DB Maintenance task mutex */
+-    maintenance_mutex = (struct semaphore *) kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+-    if (!maintenance_mutex)
++    npe_eth_workqueue = create_workqueue(DRV_NAME);
++    if (npe_eth_workqueue == NULL)
+ 	return -ENOMEM;
+ 
+-    init_MUTEX(maintenance_mutex);
+-
+     TRACE;
+ 
+     /* Do not start the EthDB maintenance thread if learning & filtering feature is disabled */
+     if (npe_learning) /* module parameter */
+     {
+-        maintenance_timer_set();
++        schedule_db_maintenance();
+     }
+ 
+     TRACE;
+@@ -3127,12 +2971,29 @@
+     }
+     netdev_max_backlog /= BACKLOG_TUNE;
+ 
++    res = driver_register(&npe_eth_driver);
++    if (res != 0) {
++        P_ERROR("Failed to register NPE EThernet driver (res = %d)\n", res);
++        return res;
++    }
++
+     TRACE;
+ 
++    res = platform_device_register(&npe_eth_devs[0]);
++    if (res != 0) {
++        P_ERROR("Failed to register NPE platform device 0 (res = %d)\n", res);
++        return res;
++    }
++    res = platform_device_register(&npe_eth_devs[1]);
++    if (res != 0) {
++        P_ERROR("Failed to register NPE platform device 1 (res = %d)\n", res);
++        return res;
++    }
++
+     return 0;
+ }
+ 
+-void cleanup_module(void)
++static void __exit ixp425_eth_exit(void)
+ {
+     int dev_count;
+ 
+@@ -3147,7 +3008,9 @@
+     {
+ 	TRACE;
+ 
++#ifdef IXP425ETH_POLLING_MODE
+ 	dev_pmu_timer_disable(); /* stop the timer */
++#endif
+     
+ 	if (irq_pmu_used) 
+         {
+@@ -3169,19 +3032,10 @@
+ 
+     TRACE;
+ 
+-    /* stop the maintenance timer */
+-    maintenance_timer_clear();
+-
+-    TRACE;
+-
+-    /* Wait for maintenance task to complete (if started) */
+-    if (npe_learning) /* module parameter */
+-    {
+-	TRACE;
+-
+-	down(maintenance_mutex);
+-	up(maintenance_mutex);
+-    }
++    /* stop the maintenance timer and destroy the driver's work queue */
++    cancel_db_maintenance();
++    flush_workqueue(npe_eth_workqueue);
++    destroy_workqueue(npe_eth_workqueue);
+ 
+     TRACE;
+ 
+@@ -3194,37 +3048,39 @@
+ 	 dev_count < dev_max_count;  /* module parameter */
+ 	 dev_count++)
+     {
+-	struct net_device *dev = &ixp425_devices[dev_count];
+-	priv_data_t *priv = dev->priv;
+-	if (priv != NULL)
++	IxEthAccPortId portId = default_portId[dev_count];
++	
++	if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
+ 	{
+-	    IxEthAccPortId portId = default_portId[dev_count];
+-
+-	    if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
++	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
+ 	    {
+-		if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
+-		{
+-		    P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
+-		}
++		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
+ 	    }
+-	    if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
++	}
++	if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
++	{
++	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
+ 	    {
+-		if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
+-		{
+-		    P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
+-		}
++		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
+ 	    }
+-	    unregister_netdev(dev);
+-	    kfree(dev->priv);
+-	    dev->priv = NULL;
+ 	}
+     }
+ 
+     TRACE;
+ 
++    driver_unregister(&npe_eth_driver);
++    platform_device_unregister(&npe_eth_devs[1]);
++    platform_device_unregister(&npe_eth_devs[0]);
++
++    TRACE;
++
+     P_VERBOSE("IXP425 NPE Ethernet driver software uninstalled\n");
+ }
+ 
+ #endif /* MODULE */
+ 
++module_init(ixp425_eth_init);
++module_exit(ixp425_eth_exit);
++
++
+ 
diff --git a/recipes/ixp425-eth/ixp425-eth-1.2/makefile.patch b/recipes/ixp425-eth/ixp425-eth-1.2/makefile.patch
new file mode 100644
index 0000000000..f26c28e351
--- /dev/null
+++ b/recipes/ixp425-eth/ixp425-eth-1.2/makefile.patch
@@ -0,0 +1,11 @@
+--- ./Makefile	2005-10-01 00:36:42.634757244 -0700
++++ ./Makefile	2005-10-01 00:39:00.107407852 -0700
+@@ -6,7 +6,7 @@
+ 
+ OSAL_DIR := $(IX_XSCALE_SW)/../ixp_osal
+ CFLAGS_ixp425_eth.o = -DWall \
+-          -I$(IX_XSCALE_SW)/src/include \
++          -I$(IXP4XX_CSR_DIR) \
+           -I$(OSAL_DIR)/ \
+           -I$(OSAL_DIR)/os/linux/include/ \
+           -I$(OSAL_DIR)/os/linux/include/modules/ \
diff --git a/recipes/ixp425-eth/ixp425-eth_1.1.bb b/recipes/ixp425-eth/ixp425-eth_1.1.bb
new file mode 100644
index 0000000000..92e11e3fd2
--- /dev/null
+++ b/recipes/ixp425-eth/ixp425-eth_1.1.bb
@@ -0,0 +1,46 @@
+DEPENDS = "ixp4xx-csr patcher-native"
+LICENSE = "GPL"
+SRC_URI = "http://www.intel.com/design/network/swsup/ixp400LinuxEthernetDriverPatch-1_1.zip \
+	   http://nslu.sourceforge.net/downloads/ixp425_eth.c.patch \
+	   file://makefile.patch;patch=1 \
+	   file://ethhdr.patch;patch=1 \
+	   file://intdriven.patch;patch=1 \
+	   file://pollcontroller.patch;patch=1 \
+	   file://mm4.patch;patch=1"
+SRC_URI += "file://2.6.13.patch;patch=1"
+SRC_URI += "file://2.6.14.patch;patch=1"
+SRC_URI += "file://modprobe.conf"
+PR = "r15"
+
+RDEPENDS = "ixp4xx-csr"
+
+S = "${WORKDIR}"
+
+COMPATIBLE_HOST = "^armeb-linux.*"
+
+PROVIDES = "virtual/ixp-eth"
+RPROVIDES = "ixp-eth"
+
+inherit module
+
+do_pre_patch () {
+	patcher -p 0 -i ixp425_eth_1_1_update_nf_bridge.patch
+	patcher -f -p 0 -i ixp425_eth.c.patch
+}
+
+addtask pre_patch before do_patch
+
+do_compile () {
+        unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+	oe_runmake 'KDIR=${STAGING_KERNEL_DIR}' \
+		   'CC=${KERNEL_CC}' \
+		   'LD=${KERNEL_LD}' \
+		   'EXTRA_CFLAGS=-I${STAGING_INCDIR}/linux/ixp4xx-csr -I${STAGING_KERNEL_DIR}/include -DCPU=33 -DXSCALE=33'
+}
+
+do_install () {
+	install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net
+	install -m 0644 ixp425_eth.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net/
+	install -d ${D}${sysconfdir}/modprobe.d
+	install -m 0644 modprobe.conf ${D}${sysconfdir}/modprobe.d/eth0
+}
diff --git a/recipes/ixp425-eth/ixp425-eth_1.2.bb b/recipes/ixp425-eth/ixp425-eth_1.2.bb
new file mode 100644
index 0000000000..9d537d9126
--- /dev/null
+++ b/recipes/ixp425-eth/ixp425-eth_1.2.bb
@@ -0,0 +1,46 @@
+# This is the Intel GPL IXP4XX ethernet driver (Linux) plus patches
+# to make it work on 2.6 kernels.
+#
+LICENSE = "GPL"
+SRC_URI = "ftp://download.intel.com/design/network/swsup/ixp400linuxethernetdriverpatch-1_2.zip"
+SRC_URI += "file://ixp400linuxethernetdriver-1_2-kernel26_hr_20050929.patch;patch=1"
+SRC_URI += "file://makefile.patch;patch=1"
+SRC_URI += "file://2.6.13.patch;patch=1"
+SRC_URI += "file://2.6.14.patch;patch=1"
+SRC_URI += "file://modprobe.conf"
+PR = "r4"
+
+DEPENDS = "ixp4xx-csr"
+RDEPENDS = "ixp4xx-csr"
+
+S = "${WORKDIR}"
+
+COMPATIBLE_HOST = "^armeb-linux.*"
+
+PROVIDES = "virtual/ixp-eth"
+RPROVIDES = "ixp-eth"
+
+inherit module
+
+# This is a somewhat arbitrary choice:
+OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
+
+EXTRA_OEMAKE = "'CC=${KERNEL_CC}' \
+		'LD=${KERNEL_LD}' \
+		'IXP4XX_CSR_DIR=${STAGING_INCDIR}/linux/ixp4xx-csr' \
+		'OSAL_DIR=${OSAL_DIR}' \
+		'LINUX_SRC=${STAGING_KERNEL_DIR}' \
+		'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \
+		"
+
+do_compile () {
+        unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+	oe_runmake
+}
+
+do_install () {
+	install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net
+	install -m 0644 ixp425_eth.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net/
+	install -d ${D}${sysconfdir}/modprobe.d
+	install -m 0644 modprobe.conf ${D}${sysconfdir}/modprobe.d/eth0
+}
author	Denys Dmytriyenko <denis@denix.org>	2009-03-17 14:32:59 -0400
committer	Denys Dmytriyenko <denis@denix.org>	2009-03-17 14:32:59 -0400
commit	709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree	37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/ixp425-eth
parent	fa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)
download	openembedded-709c4d66e0b107ca606941b988bad717c0b45d9b.tar.gz