aboutsummaryrefslogtreecommitdiffstats
path: root/recipes/kexecboot
diff options
context:
space:
mode:
authorAndrea Adami <andrea.adami@gmail.com>2010-05-30 01:37:03 +0200
committerAndrea Adami <andrea.adami@gmail.com>2010-05-30 01:37:03 +0200
commit142bbf10cfa550dc2f801e9a9509d6b023de9a57 (patch)
treea089e5a364cf5887c592d6a9a5f4c1ca07554396 /recipes/kexecboot
parente12fb470292d0fbe6b6912c779033c2c1cf8aa3e (diff)
downloadopenembedded-142bbf10cfa550dc2f801e9a9509d6b023de9a57.tar.gz
openembedded-142bbf10cfa550dc2f801e9a9509d6b023de9a57.tar.bz2
openembedded-142bbf10cfa550dc2f801e9a9509d6b023de9a57.zip
linux-kexecboot: update 2.6.26 patchset for poodle
Diffstat (limited to 'recipes/kexecboot')
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/poodle/defconfig1751
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/poodle_pm-r7.patch481
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/poodle_serial_vcc-r1.patch30
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/poodle_ts.patch22
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/pxafb.patch13
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch85
-rw-r--r--recipes/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch73
-rw-r--r--recipes/kexecboot/linux-kexecboot_2.6.26.bb11
8 files changed, 2403 insertions, 63 deletions
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/poodle/defconfig b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle/defconfig
new file mode 100644
index 0000000000..4d40205111
--- /dev/null
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle/defconfig
@@ -0,0 +1,1751 @@
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8
+# Fri Jan 25 22:13:14 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+CONFIG_MACH_POODLE=y
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
+# CONFIG_MACH_TOSA is not set
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_KEYS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+CONFIG_CPU_FREQ_PXA25x=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_MULTIPATH_HP is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_ATMEL is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+# CONFIG_ZD1211RW is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_CORGI is not set
+# CONFIG_KEYBOARD_SPITZ is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_USB_DSBR=m
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_DEFERRED_IO is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_POODLE=m
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_WM8731=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_AC97_BUS is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+CONFIG_USB_CYTHERM=m
+# CONFIG_USB_PHIDGET is not set
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LOCOMO=y
+# CONFIG_LEDS_TOSA is not set
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_SYSFS is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_pm-r7.patch b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_pm-r7.patch
new file mode 100644
index 0000000000..75ad6213f4
--- /dev/null
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_pm-r7.patch
@@ -0,0 +1,481 @@
+ arch/arm/common/locomo.c | 6
+ arch/arm/common/sharpsl_pm.c | 9
+ arch/arm/mach-pxa/Kconfig | 1
+ arch/arm/mach-pxa/Makefile | 2
+ arch/arm/mach-pxa/poodle_pm.c | 355 ++++++++++++++++++++++++++++++++++++++
+ include/asm-arm/hardware/locomo.h | 5
+ 6 files changed, 377 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.26/arch/arm/common/sharpsl_pm.c
+===================================================================
+--- linux-2.6.26.orig/arch/arm/common/sharpsl_pm.c 2008-08-05 22:15:07.000000000 -0700
++++ linux-2.6.26/arch/arm/common/sharpsl_pm.c 2008-08-05 22:15:11.000000000 -0700
+@@ -458,6 +458,10 @@
+ {
+ int temp, i, buff[5];
+
++ /* Some devices don't support this */
++ if (!sharpsl_pm.machinfo->charge_acin_high)
++ return 0;
++
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+@@ -598,6 +602,9 @@
+
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
++ if (machine_is_poodle())
++ return 0;
++
+ /* Check AC-Adapter */
+ acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+@@ -664,6 +671,7 @@
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+ /* AC Check */
++ if (!machine_is_poodle())
+ if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+ return sharpsl_off_charge_error();
+
+@@ -686,6 +694,7 @@
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
++ if (!machine_is_poodle())
+ if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+ return sharpsl_off_charge_error();
+
+Index: linux-2.6.26/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.26.orig/arch/arm/mach-pxa/Kconfig 2008-08-05 22:15:05.000000000 -0700
++++ linux-2.6.26/arch/arm/mach-pxa/Kconfig 2008-08-05 22:16:25.000000000 -0700
+@@ -210,6 +210,7 @@
+ bool "Enable Sharp SL-5600 (Poodle) Support"
+ depends on PXA_SHARPSL_25x
+ select SHARP_LOCOMO
++ select SHARPSL_PM
+ select PXA_SSP
+
+ config MACH_CORGI
+Index: linux-2.6.26/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.26.orig/arch/arm/mach-pxa/Makefile 2008-08-05 22:15:05.000000000 -0700
++++ linux-2.6.26/arch/arm/mach-pxa/Makefile 2008-08-05 22:16:25.000000000 -0700
+@@ -30,7 +30,7 @@
+ obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
+ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
+ obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
+-obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
++obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o
+ obj-$(CONFIG_MACH_HX2750) += hx2750.o hx2750_test.o
+ obj-$(CONFIG_MACH_PCM027) += pcm027.o
+ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
+Index: linux-2.6.26/arch/arm/mach-pxa/poodle_pm.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.26/arch/arm/mach-pxa/poodle_pm.c 2008-08-05 22:21:31.000000000 -0700
+@@ -0,0 +1,356 @@
++/*
++ * Battery and Power Management code for the Sharp SL-5600
++ *
++ * Copyright (c) 2006 Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/stat.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/apm-emulation.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/hardware/scoop.h>
++#include <asm/hardware/locomo.h>
++
++#include <asm/arch/sharpsl.h>
++#include <asm/arch/poodle.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxa2xx-gpio.h>
++#include "sharpsl.h"
++
++#if 0
++#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
++#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
++#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
++#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
++#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
++#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
++#endif
++
++#define SHARPSL_CHARGE_ON_VOLT 1187 // 2.9V
++#define SHARPSL_CHARGE_ON_TEMP 2441
++#define SHARPSL_FATAL_NOACIN_VOLT 1454 // 3.55V
++#define SHARPSL_FATAL_ACIN_VOLT 1474 // 3.60V
++
++
++#if 0
++#define SHARPSL_POWER_MODE_CHECK 1475
++#define SHARPSL_POODLE_FATAL_VOLT 1433
++#define SHARPSL_POODLE_FATAL_NOACIN_FLON_VOLT 1454 // 3.55V
++#define SHARPSL_POODLE_FATAL_NOACIN_FLOFF_VOLT 1433 // 3.50V
++#define SHARPSL_POODLE_FATAL_ACIN_FLON_VOLT 1474 // 3.60V
++#define SHARPSL_POODLE_FATAL_ACIN_FLOFF_VOLT 1454 // 3.55V
++#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 5 // 50msec
++#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 1 // 10msec
++#define SHARPSL_WAIT_DISCHARGE_ON 5 // 50msec
++#endif
++
++
++struct battery_thresh poodle_battery_levels_fl[] = {
++ {1582, 100},
++ {1527, 75},
++ {1482, 50},
++ {1458, 25},
++ {1404, 5},
++ { 0, 0},
++};
++
++struct battery_thresh poodle_battery_levels_nofl[] = {
++ {1589, 100},
++ {1536, 75},
++ {1490, 50},
++ {1466, 25},
++ {1413, 5},
++ { 0, 0},
++};
++
++struct battery_thresh poodle_battery_levels_acin_fl[] = {
++ {1601, 100},
++ {1536, 75},
++ {1503, 50},
++ {1482, 25},
++ { 0, 5},
++ { 0, 0},
++};
++
++struct battery_thresh poodle_battery_levels_acin_nofl[] = {
++ {1609, 100},
++ {1548, 75},
++ {1527, 50},
++ {1495, 25},
++ { 0, 5},
++ { 0, 0},
++};
++
++static void poodle_charger_init(void)
++{
++ pxa_gpio_mode(POODLE_GPIO_ADC_TEMP_ON | GPIO_OUT);
++ pxa_gpio_mode(POODLE_GPIO_CHRG_ON | GPIO_OUT);
++ pxa_gpio_mode(POODLE_GPIO_BYPASS_ON | GPIO_OUT);
++ pxa_gpio_mode(POODLE_GPIO_ON_KEY | GPIO_IN);
++ sharpsl_pm_pxa_init();
++}
++
++static void poodle_measure_temp(int on)
++{
++ if (on)
++ GPSR(POODLE_GPIO_ADC_TEMP_ON) = GPIO_bit(POODLE_GPIO_ADC_TEMP_ON);
++ else
++ GPCR(POODLE_GPIO_ADC_TEMP_ON) = GPIO_bit(POODLE_GPIO_ADC_TEMP_ON);
++}
++
++extern struct locomo_dev *frontlight_dev;
++
++static void poodle_charge(int on)
++{
++ if (on) {
++ GPSR(POODLE_GPIO_CHRG_ON) = GPIO_bit(POODLE_GPIO_CHRG_ON);
++ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_JK_B, 1);
++ } else {
++ GPCR(POODLE_GPIO_CHRG_ON) = GPIO_bit(POODLE_GPIO_CHRG_ON);
++ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_JK_B, 0);
++ }
++}
++
++static void poodle_discharge(int on)
++{
++ if (on)
++ GPSR(POODLE_GPIO_DISCHARGE_ON) = GPIO_bit(POODLE_GPIO_DISCHARGE_ON);
++ else
++ GPCR(POODLE_GPIO_DISCHARGE_ON) = GPIO_bit(POODLE_GPIO_DISCHARGE_ON);
++}
++
++static void poodle_presuspend(void)
++{
++ int i;
++ unsigned long wakeup_mask;
++
++ /* charging , so CHARGE_ON bit is HIGH during OFF. */
++ if (READ_GPIO_BIT(POODLE_GPIO_CHRG_ON))
++ PGSR1 |= GPIO_bit(POODLE_GPIO_CHRG_ON);
++ else
++ PGSR1 &= ~GPIO_bit(POODLE_GPIO_CHRG_ON);
++
++// if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN))
++// PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN);
++// else
++// PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN);
++
++ /* Resume on keyboard power key */
++// PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0);
++
++ wakeup_mask = GPIO_bit(POODLE_GPIO_ON_KEY) | GPIO_bit(POODLE_GPIO_WAKEUP);
++ wakeup_mask |= GPIO_bit(POODLE_GPIO_AC_IN) | GPIO_bit(POODLE_GPIO_CHRG_FULL);
++ wakeup_mask |= GPIO_bit(POODLE_GPIO_MAIN_BAT_LOW) | GPIO_bit(POODLE_GPIO_CF_CD);
++ wakeup_mask |= GPIO_bit(POODLE_GPIO_HP_IN) | GPIO_bit(POODLE_GPIO_GA_INT) | GPIO_bit(POODLE_GPIO_nSD_INT);
++
++
++// if (!machine_is_corgi())
++// GPDR0 &= ~(GPIO_bit(15) | GPIO_bit(8)); /* Float n_CS1 */
++
++ PWER = wakeup_mask | PWER_RTC;
++ PRER = wakeup_mask;
++ PFER = wakeup_mask;
++
++ for (i = 0; i <=15; i++) {
++ if (PRER & PFER & GPIO_bit(i)) {
++ if (GPLR0 & GPIO_bit(i) )
++ PRER &= ~GPIO_bit(i);
++ else
++ PFER &= ~GPIO_bit(i);
++ }
++ }
++}
++
++static void poodle_postsuspend(void)
++{
++// if (!machine_is_corgi())
++// GPDR0 |= GPIO_bit(15) | GPIO_bit(8); /* Un-Float n_CS1 */
++}
++
++/*
++ * Check what brought us out of the suspend.
++ * Return: 0 to sleep, otherwise wake
++ */
++static int poodle_should_wakeup(unsigned int resume_on_alarm)
++{
++ int is_resume = 0;
++
++ dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
++
++ if ((PEDR & GPIO_bit(POODLE_GPIO_AC_IN))) {
++ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
++ /* charge on */
++ dev_dbg(sharpsl_pm.dev, "ac insert\n");
++ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
++ } else {
++ /* charge off */
++ dev_dbg(sharpsl_pm.dev, "ac remove\n");
++ sharpsl_pm_led(SHARPSL_LED_OFF);
++ sharpsl_pm.machinfo->charge(0);
++ sharpsl_pm.charge_mode = CHRG_OFF;
++ }
++ }
++
++ if ((PEDR & GPIO_bit(POODLE_GPIO_CHRG_FULL)))
++ dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_ON_KEY))
++ is_resume |= GPIO_bit(POODLE_GPIO_ON_KEY);
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_WAKEUP))
++ is_resume |= GPIO_bit(POODLE_GPIO_WAKEUP);
++
++// if ( (apm_wakeup_factor & GPIO_bit(GPIO_GA_INT)) && (LCM_KIC & 1) ) {
++// LCM_KIC &= ~0x100;
++// LCM_ICR &= ~0x100;
++// is_resume |= GPIO_bit(GPIO_GA_INT);
++// }
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_CF_STSCHG))
++ is_resume |= GPIO_bit(POODLE_GPIO_CF_STSCHG);
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_nSD_INT))
++ is_resume |= GPIO_bit(POODLE_GPIO_nSD_INT);
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_HP_IN))
++ is_resume |= GPIO_bit(POODLE_GPIO_HP_IN);
++
++ if (resume_on_alarm && (PEDR & PWER_RTC))
++ is_resume |= PWER_RTC;
++
++ dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
++ return is_resume;
++}
++
++static unsigned long poodle_charger_wakeup(void)
++{
++ return ~GPLR0 & ( GPIO_bit(POODLE_GPIO_AC_IN) | GPIO_bit(POODLE_GPIO_ON_KEY) | GPIO_bit(POODLE_GPIO_WAKEUP) );
++}
++
++#define MUX_CHL 6u
++#define BATT_CHL 2u
++
++/* ADS7846 Touch Screen Controller bit definitions */
++#define ADSCTRL_PD0 (1u << 0) /* PD0 */
++#define ADSCTRL_PD1 (1u << 1) /* PD1 */
++#define ADSCTRL_DFR (1u << 2) /* SER/DFR */
++#define ADSCTRL_MOD (1u << 3) /* Mode */
++#define ADSCTRL_ADR_SH 4 /* Address setting */
++#define ADSCTRL_STS (1u << 7) /* Start Bit */
++
++int poodle_pm_read_ads7846(int channel)
++{
++ int voltage;
++ int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | ADSCTRL_DFR |
++ (channel << ADSCTRL_ADR_SH) | ADSCTRL_STS;
++
++ corgi_ssp_ads7846_lock();
++
++ corgi_ssp_ads7846_put(cmd);
++ corgi_ssp_ads7846_get();
++
++ corgi_ssp_ads7846_put(cmd);
++ voltage = corgi_ssp_ads7846_get();
++
++ /* Power-Down Enable */
++ corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
++ corgi_ssp_ads7846_get();
++
++ corgi_ssp_ads7846_unlock();
++
++ return voltage;
++}
++
++unsigned long poodlepm_read_devdata(int type)
++{
++ switch(type) {
++ case SHARPSL_STATUS_ACIN:
++ return ((GPLR(POODLE_GPIO_AC_IN) & GPIO_bit(POODLE_GPIO_AC_IN)) != 0);
++ case SHARPSL_STATUS_LOCK:
++ return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
++ case SHARPSL_STATUS_CHRGFULL:
++ return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
++ case SHARPSL_STATUS_FATAL:
++ return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
++// case SHARPSL_ACIN_VOLT:
++// return poodle_pm_read_ads7846(MAX1111_ACIN_VOLT);
++// FIXME
++ case SHARPSL_BATT_TEMP:
++ return poodle_pm_read_ads7846(MUX_CHL);
++ case SHARPSL_BATT_VOLT:
++ default:
++ return poodle_pm_read_ads7846(BATT_CHL);
++ }
++}
++
++static void poodle_limit_intensity(int limit)
++{
++}
++
++static struct sharpsl_charger_machinfo poodle_pm_machinfo = {
++ .init = poodle_charger_init,
++ .exit = sharpsl_pm_pxa_remove,
++ .gpio_batlock = POODLE_GPIO_BAT_COVER,
++ .gpio_acin = POODLE_GPIO_AC_IN,
++ .gpio_batfull = POODLE_GPIO_CHRG_FULL,
++ .batfull_irq = 1,
++ .discharge = poodle_discharge,
++ .charge = poodle_charge,
++ .measure_temp = poodle_measure_temp,
++ .presuspend = poodle_presuspend,
++ .postsuspend = poodle_postsuspend,
++ .read_devdata = poodlepm_read_devdata,
++ .charger_wakeup = poodle_charger_wakeup,
++ .should_wakeup = poodle_should_wakeup,
++ .backlight_limit = poodle_limit_intensity,
++ .charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
++ .charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
++ .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
++ .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
++ .bat_levels = 6,
++ .bat_levels_noac = poodle_battery_levels_fl,
++ .bat_levels_acin = poodle_battery_levels_nofl,
++ .status_high_acin = 1490,
++ .status_low_acin = 1466,
++ .status_high_noac = 1482,
++ .status_low_noac = 1458,
++};
++
++static struct platform_device *poodlepm_device;
++
++static int __devinit poodlepm_init(void)
++{
++ int ret;
++
++ poodlepm_device = platform_device_alloc("sharpsl-pm", -1);
++ if (!poodlepm_device)
++ return -ENOMEM;
++
++ poodlepm_device->dev.platform_data = &poodle_pm_machinfo;
++ ret = platform_device_add(poodlepm_device);
++
++ if (ret)
++ platform_device_put(poodlepm_device);
++
++ return ret;
++}
++
++static void poodlepm_exit(void)
++{
++ platform_device_unregister(poodlepm_device);
++}
++
++module_init(poodlepm_init);
++module_exit(poodlepm_exit);
+Index: linux-2.6.26/arch/arm/common/locomo.c
+===================================================================
+--- linux-2.6.26.orig/arch/arm/common/locomo.c 2008-07-13 14:51:29.000000000 -0700
++++ linux-2.6.26/arch/arm/common/locomo.c 2008-08-05 22:16:20.000000000 -0700
+@@ -600,6 +600,7 @@
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
++ // FIXME - should save JK_B
+ locomo_writel(0x00, lchip->base + LOCOMO_GPO);
+ save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
+ locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+@@ -1101,11 +1102,16 @@
+
+ static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
+
++struct locomo_dev *frontlight_dev;
++EXPORT_SYMBOL(frontlight_dev);
++
+ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
+ {
+ unsigned long flags;
+ struct locomo *lchip = locomo_chip_driver(dev);
+
++ frontlight_dev = dev;
++
+ if (vr)
+ locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
+ else
+Index: linux-2.6.26/include/asm-arm/hardware/locomo.h
+===================================================================
+--- linux-2.6.26.orig/include/asm-arm/hardware/locomo.h 2008-07-13 14:51:29.000000000 -0700
++++ linux-2.6.26/include/asm-arm/hardware/locomo.h 2008-08-05 22:15:11.000000000 -0700
+@@ -100,6 +100,12 @@
+ #define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+ #define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+ #define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
++#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
++#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
++#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
++#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
++#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
++
+
+ /* Start the definitions of the devices. Each device has an initial
+ * base address and a series of offsets from that base address. */
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_serial_vcc-r1.patch b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_serial_vcc-r1.patch
new file mode 100644
index 0000000000..853dce8ac2
--- /dev/null
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_serial_vcc-r1.patch
@@ -0,0 +1,30 @@
+
+Index: linux-2.6.26/arch/arm/common/locomo.c
+===================================================================
+--- linux-2.6.26.orig/arch/arm/common/locomo.c 2008-08-02 20:53:56.000000000 -0700
++++ linux-2.6.26/arch/arm/common/locomo.c 2008-08-04 16:50:29.000000000 -0700
+@@ -715,7 +715,7 @@
+ locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+
+ /* GPIO */
+- locomo_writel(0, lchip->base + LOCOMO_GPO);
++ locomo_writel(POODLE_LOCOMO_GPIO_232VCC_ON, lchip->base + LOCOMO_GPO);
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ , lchip->base + LOCOMO_GPE);
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+Index: linux-2.6.26/drivers/serial/pxa.c
+===================================================================
+--- linux-2.6.26.orig/drivers/serial/pxa.c 2008-08-04 16:46:37.000000000 -0700
++++ linux-2.6.26/drivers/serial/pxa.c 2008-08-04 16:48:18.000000000 -0700
+@@ -296,9 +296,9 @@
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+- mcr |= UART_MCR_RTS;
++ mcr &= ~UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+- mcr |= UART_MCR_DTR;
++ mcr &= ~UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_ts.patch b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_ts.patch
new file mode 100644
index 0000000000..97c0a66400
--- /dev/null
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/poodle_ts.patch
@@ -0,0 +1,22 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/poodle.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/poodle.c 2008-01-25 12:10:10.000000000 -0800
++++ linux-2.6.23/arch/arm/mach-pxa/poodle.c 2008-01-25 12:11:58.000000000 -0800
+@@ -166,7 +166,7 @@
+ },
+ };
+
+-static unsigned long poodle_get_hsync_len(void)
++static unsigned long poodle_get_hsync_invperiod(void)
+ {
+ return 0;
+ }
+@@ -176,7 +176,7 @@
+ }
+
+ static struct corgits_machinfo poodle_ts_machinfo = {
+- .get_hsync_len = poodle_get_hsync_len,
++ .get_hsync_invperiod = poodle_get_hsync_invperiod,
+ .put_hsync = poodle_null_hsync,
+ .wait_hsync = poodle_null_hsync,
+ };
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/pxafb.patch b/recipes/kexecboot/linux-kexecboot-2.6.26/pxafb.patch
new file mode 100644
index 0000000000..e98543b2e4
--- /dev/null
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/pxafb.patch
@@ -0,0 +1,13 @@
+Index: linux-2.6.23/drivers/video/pxafb.c
+===================================================================
+--- linux-2.6.23.orig/drivers/video/pxafb.c 2008-01-25 16:25:21.000000000 -0800
++++ linux-2.6.23/drivers/video/pxafb.c 2008-01-25 16:32:14.000000000 -0800
+@@ -1194,7 +1194,7 @@
+ if ((clkinfo->old == 13000))
+ break;
+
+- pcd = get_pcd(fbi->fb.var.pixclock);
++ pcd = get_pcd(fbi,fbi->fb.var.pixclock);
+ lccr3 = fbi->reg_lccr3;
+ set_hsync_time(fbi, pcd);
+ fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch b/recipes/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch
index a9d939d076..58ac0eeb06 100644
--- a/recipes/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/sharpsl-rc-r1.patch
@@ -1,8 +1,9 @@
-This patch adds support for Sharp CE-RH2 on Spitz.
+This patch adds support for Sharp CE-RH2 on Akita+Spitz and CE-RH1 on Corgi.
It is not clean enough to be upstreamed:
-- It is a bit syslog-noisy.
-- Does not support other Zaurus models.
+ * Configuration shoud to platform tables
+ * Maybe more generic driver would be better
+ * Deprecated way to use Scoop GPIO
- Maybe split to more parts:
* MAX1111 driver
* linear input device
@@ -10,9 +11,9 @@ It is not clean enough to be upstreamed:
Index: linux-2.6.26/arch/arm/mach-pxa/spitz.c
===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/spitz.c 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/spitz.c 2008-07-15 10:11:15.000000000 +0000
-@@ -261,6 +261,13 @@
+--- linux-2.6.26.orig/arch/arm/mach-pxa/spitz.c
++++ linux-2.6.26/arch/arm/mach-pxa/spitz.c
+@@ -262,6 +262,13 @@ static struct platform_device spitzkbd_d
.id = -1,
};
@@ -26,7 +27,7 @@ Index: linux-2.6.26/arch/arm/mach-pxa/spitz.c
/*
* Spitz LEDs
-@@ -522,6 +529,7 @@
+@@ -523,6 +530,7 @@ static struct platform_device *devices[]
&spitzscoop_device,
&spitzssp_device,
&spitzkbd_device,
@@ -36,9 +37,9 @@ Index: linux-2.6.26/arch/arm/mach-pxa/spitz.c
&spitzled_device,
Index: linux-2.6.26/drivers/input/keyboard/Kconfig
===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/Kconfig 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/Kconfig 2008-07-15 10:11:15.000000000 +0000
-@@ -175,6 +175,17 @@
+--- linux-2.6.26.orig/drivers/input/keyboard/Kconfig
++++ linux-2.6.26/drivers/input/keyboard/Kconfig
+@@ -175,6 +175,17 @@ config KEYBOARD_TOSA_USE_EXT_KEYCODES
Say Y only if you know, what you are doing!
@@ -58,9 +59,9 @@ Index: linux-2.6.26/drivers/input/keyboard/Kconfig
depends on AMIGA
Index: linux-2.6.26/drivers/input/keyboard/Makefile
===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/Makefile 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/Makefile 2008-07-15 10:11:15.000000000 +0000
-@@ -26,4 +26,5 @@
+--- linux-2.6.26.orig/drivers/input/keyboard/Makefile
++++ linux-2.6.26/drivers/input/keyboard/Makefile
+@@ -26,4 +26,5 @@ obj-$(CONFIG_KEYBOARD_HP6XX) += jornada
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
@@ -68,9 +69,9 @@ Index: linux-2.6.26/drivers/input/keyboard/Makefile
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c 2008-07-15 10:11:15.000000000 +0000
-@@ -0,0 +1,319 @@
+--- /dev/null
++++ linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
+@@ -0,0 +1,321 @@
+/*
+ * Keyboard driver for Sharp Clamshell Models (SL-Cxx00)
+ *
@@ -171,7 +172,7 @@ Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
+ ++i) {
+ if (val >= remote_keys[i].min
+ && val <= remote_keys[i].max) {
-+ printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key);
++ //printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key);
+ return remote_keys[i].key;
+ }
+ }
@@ -232,6 +233,7 @@ Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
+ } else {
+ DPRINTK("key press detected %d, noise %d", data->last_key, data->noise);
+ input_report_key(data->input, data->last_key, 1);
++ input_sync(data->input);
+ }
+ ++data->state;
+
@@ -249,6 +251,7 @@ Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
+ //send button release
+ DPRINTK("release key %d", data->last_key);
+ input_report_key(data->input, data->last_key, 0);
++ input_sync(data->input);
+ timer = 0;
+ }
+ if (timer) {
@@ -373,13 +376,13 @@ Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
+
+static int __devinit sharpsl_rc_init(void)
+{
-+ printk("sharpsl_rc_init\n");
++ //printk("sharpsl_rc_init\n");
+ return platform_driver_register(&sharpsl_rc_driver);
+}
+
+static void __exit sharpsl_rc_exit(void)
+{
-+ printk("sharpsl_rc_exit\n");
++ //printk("sharpsl_rc_exit\n");
+ platform_driver_unregister(&sharpsl_rc_driver);
+}
+
@@ -392,8 +395,8 @@ Index: linux-2.6.26/drivers/input/keyboard/sharpsl_rc.c
+MODULE_LICENSE("GPL");
Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
===================================================================
---- linux-2.6.26.orig/drivers/input/keyboard/spitzkbd.c 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/drivers/input/keyboard/spitzkbd.c 2008-07-15 10:11:15.000000000 +0000
+--- linux-2.6.26.orig/drivers/input/keyboard/spitzkbd.c
++++ linux-2.6.26/drivers/input/keyboard/spitzkbd.c
@@ -19,6 +19,7 @@
#include <linux/jiffies.h>
#include <linux/module.h>
@@ -402,7 +405,7 @@ Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
#include <asm/arch/spitz.h>
#include <asm/arch/hardware.h>
-@@ -280,13 +281,21 @@
+@@ -280,13 +281,21 @@ static irqreturn_t spitzkbd_hinge_isr(in
static int sharpsl_hinge_state;
static int hinge_count;
@@ -424,7 +427,7 @@ Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
if (state != sharpsl_hinge_state) {
hinge_count = 0;
-@@ -300,9 +309,18 @@
+@@ -300,9 +309,18 @@ static void spitzkbd_hinge_timer(unsigne
input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
@@ -444,7 +447,7 @@ Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
} else {
mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
-@@ -396,6 +414,7 @@
+@@ -396,6 +414,7 @@ static int __init spitzkbd_probe(struct
set_bit(SW_LID, input_dev->swbit);
set_bit(SW_TABLET_MODE, input_dev->swbit);
set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
@@ -452,7 +455,7 @@ Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
err = input_register_device(input_dev);
if (err)
-@@ -433,9 +452,12 @@
+@@ -433,9 +452,12 @@ static int __init spitzkbd_probe(struct
request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWB", spitzkbd);
@@ -466,7 +469,7 @@ Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
return 0;
-@@ -456,6 +478,7 @@
+@@ -456,6 +478,7 @@ static int spitzkbd_remove(struct platfo
free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
@@ -476,9 +479,9 @@ Index: linux-2.6.26/drivers/input/keyboard/spitzkbd.c
del_timer_sync(&spitzkbd->htimer);
Index: linux-2.6.26/arch/arm/mach-pxa/sharpsl.h
===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/sharpsl.h 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/sharpsl.h 2008-07-15 10:11:15.000000000 +0000
-@@ -37,15 +37,10 @@
+--- linux-2.6.26.orig/arch/arm/mach-pxa/sharpsl.h
++++ linux-2.6.26/arch/arm/mach-pxa/sharpsl.h
+@@ -37,15 +37,10 @@ void corgi_lcdtg_hw_init(int mode);
*/
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
@@ -497,9 +500,9 @@ Index: linux-2.6.26/arch/arm/mach-pxa/sharpsl.h
Index: linux-2.6.26/arch/arm/mach-pxa/sharpsl_pm.c
===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/sharpsl_pm.c 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/sharpsl_pm.c 2008-07-15 10:11:15.000000000 +0000
-@@ -136,6 +136,8 @@
+--- linux-2.6.26.orig/arch/arm/mach-pxa/sharpsl_pm.c
++++ linux-2.6.26/arch/arm/mach-pxa/sharpsl_pm.c
+@@ -136,6 +136,8 @@ int sharpsl_pm_pxa_read_max1111(int chan
| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
}
@@ -510,9 +513,9 @@ Index: linux-2.6.26/arch/arm/mach-pxa/sharpsl_pm.c
pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
Index: linux-2.6.26/include/asm-arm/hardware/sharpsl_pm.h
===================================================================
---- linux-2.6.26.orig/include/asm-arm/hardware/sharpsl_pm.h 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/include/asm-arm/hardware/sharpsl_pm.h 2008-07-15 10:11:15.000000000 +0000
-@@ -104,3 +104,10 @@
+--- linux-2.6.26.orig/include/asm-arm/hardware/sharpsl_pm.h
++++ linux-2.6.26/include/asm-arm/hardware/sharpsl_pm.h
+@@ -104,3 +104,10 @@ irqreturn_t sharpsl_ac_isr(int irq, void
irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
@@ -525,9 +528,9 @@ Index: linux-2.6.26/include/asm-arm/hardware/sharpsl_pm.h
+int sharpsl_pm_pxa_read_max1111(int channel);
Index: linux-2.6.26/include/linux/input.h
===================================================================
---- linux-2.6.26.orig/include/linux/input.h 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/include/linux/input.h 2008-07-15 10:13:04.000000000 +0000
-@@ -640,6 +640,7 @@
+--- linux-2.6.26.orig/include/linux/input.h
++++ linux-2.6.26/include/linux/input.h
+@@ -640,6 +640,7 @@ struct input_absinfo {
#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
set = radio enabled */
#define SW_RADIO SW_RFKILL_ALL /* deprecated */
@@ -537,9 +540,9 @@ Index: linux-2.6.26/include/linux/input.h
Index: linux-2.6.26/arch/arm/mach-pxa/spitz_pm.c
===================================================================
---- linux-2.6.26.orig/arch/arm/mach-pxa/spitz_pm.c 2008-07-13 21:51:29.000000000 +0000
-+++ linux-2.6.26/arch/arm/mach-pxa/spitz_pm.c 2008-07-15 10:11:15.000000000 +0000
-@@ -160,6 +160,13 @@
+--- linux-2.6.26.orig/arch/arm/mach-pxa/spitz_pm.c
++++ linux-2.6.26/arch/arm/mach-pxa/spitz_pm.c
+@@ -160,6 +160,13 @@ static int spitz_should_wakeup(unsigned
if (resume_on_alarm && (PEDR & PWER_RTC))
is_resume |= PWER_RTC;
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch b/recipes/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch
index 40214e42b0..e0db0746cd 100644
--- a/recipes/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch
+++ b/recipes/kexecboot/linux-kexecboot-2.6.26/zaurus-i2c-init.patch
@@ -14,15 +14,42 @@ Stanislav.
Reported-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
+ arch/arm/mach-pxa/corgi.c | 2 ++
arch/arm/mach-pxa/poodle.c | 2 ++
arch/arm/mach-pxa/spitz.c | 2 ++
- 2 files changed, 4 insertions(+), 0 deletions(-)
+ 3 files changed, 6 insertions(+)
-diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
-index 39612cf..510018b 100644
---- a/arch/arm/mach-pxa/poodle.c
-+++ b/arch/arm/mach-pxa/poodle.c
-@@ -36,6 +36,7 @@
+--- linux-2.6.26.orig/arch/arm/mach-pxa/corgi.c
++++ linux-2.6.26/arch/arm/mach-pxa/corgi.c
+@@ -38,10 +38,11 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/pxa2xx-gpio.h>
+ #include <asm/arch/irda.h>
+ #include <asm/arch/mmc.h>
+ #include <asm/arch/udc.h>
++#include <asm/arch/i2c.h>
+ #include <asm/arch/corgi.h>
+ #include <asm/arch/sharpsl.h>
+
+ #include <asm/mach/sharpsl_param.h>
+ #include <asm/hardware/scoop.h>
+@@ -529,10 +530,11 @@ static void __init corgi_init(void)
+ pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+
+ pxa_set_udc_info(&udc_info);
+ pxa_set_mci_info(&corgi_mci_platform_data);
+ pxa_set_ficp_info(&corgi_ficp_platform_data);
++ pxa_set_i2c_info(NULL);
+
+ platform_scoop_config = &corgi_pcmcia_config;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+--- linux-2.6.26.orig/arch/arm/mach-pxa/poodle.c
++++ linux-2.6.26/arch/arm/mach-pxa/poodle.c
+@@ -33,10 +33,11 @@
+
+ #include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
@@ -30,7 +57,11 @@ index 39612cf..510018b 100644
#include <asm/arch/irda.h>
#include <asm/arch/poodle.h>
#include <asm/arch/pxafb.h>
-@@ -387,6 +388,7 @@ static void __init poodle_init(void)
+ #include <asm/arch/sharpsl.h>
+ #include <asm/arch/ssp.h>
+@@ -386,10 +387,11 @@ static void __init poodle_init(void)
+ pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
+ pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
@@ -38,11 +69,13 @@ index 39612cf..510018b 100644
platform_scoop_config = &poodle_pcmcia_config;
-diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
-index 35616a5..e2bde09 100644
---- a/arch/arm/mach-pxa/spitz.c
-+++ b/arch/arm/mach-pxa/spitz.c
-@@ -38,6 +38,7 @@
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret) {
+--- linux-2.6.26.orig/arch/arm/mach-pxa/spitz.c
++++ linux-2.6.26/arch/arm/mach-pxa/spitz.c
+@@ -36,10 +36,11 @@
+ #include <asm/mach/irq.h>
+
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
@@ -50,7 +83,11 @@ index 35616a5..e2bde09 100644
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
-@@ -572,6 +573,7 @@ static void __init common_init(void)
+ #include <asm/arch/udc.h>
+ #include <asm/arch/pxafb.h>
+@@ -579,10 +580,11 @@ static void __init common_init(void)
+ pxa_set_mci_info(&spitz_mci_platform_data);
+ pxa_set_ohci_info(&spitz_ohci_platform_data);
pxa_set_ficp_info(&spitz_ficp_platform_data);
set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
@@ -58,11 +95,5 @@ index 35616a5..e2bde09 100644
}
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
---
-1.5.6.2
-
-
--------------------------------------------------------------------
-List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
-FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
-Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
+ static void spitz_bl_set_intensity(int intensity)
+ {
diff --git a/recipes/kexecboot/linux-kexecboot_2.6.26.bb b/recipes/kexecboot/linux-kexecboot_2.6.26.bb
index f8e87c46e9..de08362481 100644
--- a/recipes/kexecboot/linux-kexecboot_2.6.26.bb
+++ b/recipes/kexecboot/linux-kexecboot_2.6.26.bb
@@ -10,6 +10,8 @@ DEFAULT_PREFERENCE_spitz = "1"
DEFAULT_PREFERENCE_collie = "1"
DEFAULT_PREFERENCE_c7x0 = "1"
DEFAULT_PREFERENCE_akita = "1"
+DEFAULT_PREFERENCE_poodle = "-1"
+
# Handy URLs
# git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046
@@ -36,7 +38,8 @@ SRC_URI += "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.26.tar.bz2;name=
# ${RPSRC}/pxa27x_overlay-r8.patch;name=rppatch11 \
${RPSRC}/w100_extaccel-r2.patch;name=rppatch12 \
${RPSRC}/w100_extmem-r1.patch;name=rppatch13 \
- ${RPSRC}/poodle_pm-r6.patch;name=rppatch14 \
+# ${RPSRC}/poodle_pm-r6.patch;name=rppatch14 \
+ file://poodle_pm-r7.patch;name=rppatch14 \
${RPSRC}/poodle_lcd_hack-r0.patch;name=rppatch15 \
${RPSRC}/poodle_asoc_fix-r1.patch;name=rppatch16 \
file://zaurus-i2c-init.patch;status=upstream \
@@ -73,6 +76,12 @@ SRC_URI_append_collie = "\
file://collie_keymap.patch \
"
+SRC_URI_append_poodle = "\
+ file://poodle_serial_vcc-r1.patch \
+# file://poodle_ts.patch \
+# file://pxafb.patch \
+"
+
SRC_URI_append_htcuniversal ="\
file://htcuni-acx.patch;status=external \
"