ppp: add version 2.4.5

* tested on armv5te with RTC and GPRS
* DEFAULT_PREFERENCE = "-1" for the moment until it's better tested

Signed-off-by: Eric Bénard <eric@eukrea.com>

9 files changed, 2194 insertions, 0 deletions

diff --git a/recipes/ppp/ppp-2.4.5/cifdefroute.patch b/recipes/ppp/ppp-2.4.5/cifdefroute.patch
new file mode 100644
index 0000000000..8cf43ee77a
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/cifdefroute.patch
@@ -0,0 +1,322 @@
+    Add cifdefroute patch from Debian / SuSE to implement replacedefaultroute
+    
+    http://packages.debian.org/source/etch/ppp
+    
+    Debian source package for ppp 2.4.4rel-8
+    
+    zcat http://ftp.de.debian.org/debian/pool/main/p/ppp/ppp_2.4.4rel-8.diff.gz |
+    patch -p0, then look for debian/patches/cifdefroute.diff
+
+diff --git a/pppd/ipcp.c b/pppd/ipcp.c
+index 5962c47..e6f7e2a 100644
+--- a/pppd/ipcp.c
++++ b/pppd/ipcp.c
+@@ -197,6 +197,14 @@ static option_t ipcp_option_list[] = {
+       "disable defaultroute option", OPT_ALIAS | OPT_A2CLR,
+       &ipcp_wantoptions[0].default_route },
+ 
++    { "replacedefaultroute", o_bool,
++				&ipcp_wantoptions[0].replace_default_route,
++      "Replace default route", 1
++    },
++    { "noreplacedefaultroute", o_bool,
++				&ipcp_allowoptions[0].replace_default_route,
++      "Never replace default route", OPT_A2COPY,
++				&ipcp_wantoptions[0].replace_default_route },
+     { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp,
+       "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp },
+     { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
+@@ -263,7 +271,7 @@ struct protent ipcp_protent = {
+     ip_active_pkt
+ };
+ 
+-static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t));
++static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t, bool));
+ static void ipcp_script __P((char *, int));	/* Run an up/down script */
+ static void ipcp_script_done __P((void *));
+ 
+@@ -1660,7 +1668,8 @@ ip_demand_conf(u)
+     if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE))
+ 	return 0;
+     if (wo->default_route)
+-	if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr))
++	if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr,
++		wo->replace_default_route))
+ 	    default_route_set[u] = 1;
+     if (wo->proxy_arp)
+ 	if (sifproxyarp(u, wo->hisaddr))
+@@ -1742,7 +1751,8 @@ ipcp_up(f)
+      */
+     if (demand) {
+ 	if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) {
+-	    ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr);
++	    ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr,
++				      wo->replace_default_route);
+ 	    if (go->ouraddr != wo->ouraddr) {
+ 		warn("Local IP address changed to %I", go->ouraddr);
+ 		script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr), 0);
+@@ -1767,7 +1777,8 @@ ipcp_up(f)
+ 
+ 	    /* assign a default route through the interface if required */
+ 	    if (ipcp_wantoptions[f->unit].default_route) 
+-		if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
++		if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr,
++			wo->replace_default_route))
+ 		    default_route_set[f->unit] = 1;
+ 
+ 	    /* Make a proxy ARP entry if requested. */
+@@ -1817,7 +1828,8 @@ ipcp_up(f)
+ 
+ 	/* assign a default route through the interface if required */
+ 	if (ipcp_wantoptions[f->unit].default_route) 
+-	    if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
++	    if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr,
++		    wo->replace_default_route))
+ 		default_route_set[f->unit] = 1;
+ 
+ 	/* Make a proxy ARP entry if requested. */
+@@ -1894,7 +1906,7 @@ ipcp_down(f)
+ 	sifnpmode(f->unit, PPP_IP, NPMODE_DROP);
+ 	sifdown(f->unit);
+ 	ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr,
+-			 ipcp_hisoptions[f->unit].hisaddr);
++			 ipcp_hisoptions[f->unit].hisaddr, 0);
+     }
+ 
+     /* Execute the ip-down script */
+@@ -1910,16 +1922,25 @@ ipcp_down(f)
+  * proxy arp entries, etc.
+  */
+ static void
+-ipcp_clear_addrs(unit, ouraddr, hisaddr)
++ipcp_clear_addrs(unit, ouraddr, hisaddr, replacedefaultroute)
+     int unit;
+     u_int32_t ouraddr;  /* local address */
+     u_int32_t hisaddr;  /* remote address */
++    bool replacedefaultroute;
+ {
+     if (proxy_arp_set[unit]) {
+ 	cifproxyarp(unit, hisaddr);
+ 	proxy_arp_set[unit] = 0;
+     }
+-    if (default_route_set[unit]) {
++    /* If replacedefaultroute, sifdefaultroute will be called soon
++     * with replacedefaultroute set and that will overwrite the current
++     * default route. This is the case only when doing demand, otherwise
++     * during demand, this cifdefaultroute would restore the old default
++     * route which is not what we want in this case. In the non-demand
++     * case, we'll delete the default route and restore the old if there
++     * is one saved by an sifdefaultroute with replacedefaultroute.
++     */
++    if (!replacedefaultroute && default_route_set[unit]) {
+ 	cifdefaultroute(unit, ouraddr, hisaddr);
+ 	default_route_set[unit] = 0;
+     }
+diff --git a/pppd/ipcp.h b/pppd/ipcp.h
+index 6cf14c9..7ecfa79 100644
+--- a/pppd/ipcp.h
++++ b/pppd/ipcp.h
+@@ -70,6 +70,7 @@ typedef struct ipcp_options {
+     bool old_addrs;		/* Use old (IP-Addresses) option? */
+     bool req_addr;		/* Ask peer to send IP address? */
+     bool default_route;		/* Assign default route through interface? */
++    bool replace_default_route;	/* Replace default route through interface? */
+     bool proxy_arp;		/* Make proxy ARP entry for peer? */
+     bool neg_vj;		/* Van Jacobson Compression? */
+     bool old_vj;		/* use old (short) form of VJ option? */
+diff --git a/pppd/pppd.8 b/pppd/pppd.8
+index 5f82469..222fa30 100644
+--- a/pppd/pppd.8
++++ b/pppd/pppd.8
+@@ -121,6 +121,11 @@ the gateway, when IPCP negotiation is successfully completed.
+ This entry is removed when the PPP connection is broken.  This option
+ is privileged if the \fInodefaultroute\fR option has been specified.
+ .TP
++.B replacedefaultroute
++This option is a flag to the defaultroute option. If defaultroute is
++set and this flag is also set, pppd replaces an existing default route
++with the new default route.
++.TP
+ .B disconnect \fIscript
+ Execute the command specified by \fIscript\fR, by passing it to a
+ shell, after
+@@ -706,7 +711,12 @@ disable both forms of hardware flow control.
+ .TP
+ .B nodefaultroute
+ Disable the \fIdefaultroute\fR option.  The system administrator who
+-wishes to prevent users from creating default routes with pppd
++wishes to prevent users from adding a default route with pppd
++can do so by placing this option in the /etc/ppp/options file.
++.TP
++.B noreplacedefaultroute
++Disable the \fIreplacedefaultroute\fR option. The system administrator who
++wishes to prevent users from replacing a default route with pppd
+ can do so by placing this option in the /etc/ppp/options file.
+ .TP
+ .B nodeflate
+diff --git a/pppd/pppd.h b/pppd/pppd.h
+index f43a039..feff5e6 100644
+--- a/pppd/pppd.h
++++ b/pppd/pppd.h
+@@ -642,7 +642,7 @@ int  sif6addr __P((int, eui64_t, eui64_t));
+ int  cif6addr __P((int, eui64_t, eui64_t));
+ 				/* Remove an IPv6 address from i/f */
+ #endif
+-int  sifdefaultroute __P((int, u_int32_t, u_int32_t));
++int  sifdefaultroute __P((int, u_int32_t, u_int32_t, bool replace_default_rt));
+ 				/* Create default route through i/f */
+ int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
+ 				/* Delete default route through i/f */
+diff --git a/pppd/sys-linux.c b/pppd/sys-linux.c
+index e23315a..712582d 100644
+--- a/pppd/sys-linux.c
++++ b/pppd/sys-linux.c
+@@ -206,6 +206,8 @@ static unsigned char inbuf[512]; /* buffer for chars read from loopback */
+ 
+ static int	if_is_up;	/* Interface has been marked up */
+ static int	have_default_route;	/* Gateway for default route added */
++static struct	rtentry old_def_rt;	/* Old default route */
++static int	default_rt_repl_rest;	/* replace and restore old default rt */
+ static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
+ static char proxy_arp_dev[16];		/* Device for proxy arp entry */
+ static u_int32_t our_old_addr;		/* for detecting address changes */
+@@ -1513,6 +1515,9 @@ static int read_route_table(struct rtentry *rt)
+ 	p = NULL;
+     }
+ 
++    SET_SA_FAMILY (rt->rt_dst,     AF_INET);
++    SET_SA_FAMILY (rt->rt_gateway, AF_INET);
++
+     SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
+     SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
+     SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
+@@ -1582,20 +1587,51 @@ int have_route_to(u_int32_t addr)
+ /********************************************************************
+  *
+  * sifdefaultroute - assign a default route through the address given.
+- */
+-
+-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
+-{
+-    struct rtentry rt;
+-
+-    if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
+-	if (rt.rt_flags & RTF_GATEWAY)
+-	    error("not replacing existing default route via %I",
+-		  SIN_ADDR(rt.rt_gateway));
+-	else
++ *
++ * If the global default_rt_repl_rest flag is set, then this function
++ * already replaced the original system defaultroute with some other
++ * route and it should just replace the current defaultroute with
++ * another one, without saving the current route. Use: demand mode,
++ * when pppd sets first a defaultroute it it's temporary ppp0 addresses
++ * and then changes the temporary addresses to the addresses for the real
++ * ppp connection when it has come up.
++ */
++
++int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway, bool replace)
++{
++    struct rtentry rt, tmp_rt;
++    struct rtentry *del_rt = NULL;
++
++    if (default_rt_repl_rest) {
++	/* We have already reclaced the original defaultroute, if we
++	   are called again, we will delete the current default route
++	   and set the new default route in this function.
++	   - this is normally only the case the doing demand: */
++	if (defaultroute_exists(&tmp_rt))
++	    del_rt = &tmp_rt;
++    } else if (defaultroute_exists(&old_def_rt) &&
++	       strcmp(old_def_rt.rt_dev, ifname) != 0) {
++	/* We did not yet replace an existing default route, let's
++	   check if we should save and replace a default route: */
++	if (old_def_rt.rt_flags & RTF_GATEWAY) {
++	    if (!replace) {
++		error("not replacing existing default route via %I",
++		      SIN_ADDR(old_def_rt.rt_gateway));
++		return 0;
++	    } else {
++		/* we need to copy rt_dev because we need it permanent too: */
++		char *tmp_dev = malloc(strlen(old_def_rt.rt_dev) + 1);
++		strcpy(tmp_dev, old_def_rt.rt_dev);
++		old_def_rt.rt_dev = tmp_dev;
++
++		notice("replacing old default route to %s [%I]",
++			old_def_rt.rt_dev, SIN_ADDR(old_def_rt.rt_gateway));
++		default_rt_repl_rest = 1;
++		del_rt = &old_def_rt;
++	    }
++	} else
+ 	    error("not replacing existing default route through %s",
+-		  rt.rt_dev);
+-	return 0;
++		  old_def_rt.rt_dev);
+     }
+ 
+     memset (&rt, 0, sizeof (rt));
+@@ -1610,10 +1646,16 @@ int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
+ 
+     rt.rt_flags = RTF_UP;
+     if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
+-	if ( ! ok_error ( errno ))
++	if (!ok_error(errno))
+ 	    error("default route ioctl(SIOCADDRT): %m");
+ 	return 0;
+     }
++    if (default_rt_repl_rest && del_rt)
++        if (ioctl(sock_fd, SIOCDELRT, del_rt) < 0) {
++	    if (!ok_error(errno))
++	        error("del old default route ioctl(SIOCDELRT): %m");
++	    return 0;
++        }
+ 
+     have_default_route = 1;
+     return 1;
+@@ -1642,11 +1684,21 @@ int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
+     rt.rt_flags = RTF_UP;
+     if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
+ 	if (still_ppp()) {
+-	    if ( ! ok_error ( errno ))
++	    if (!ok_error(errno))
+ 		error("default route ioctl(SIOCDELRT): %m");
+ 	    return 0;
+ 	}
+     }
++    if (default_rt_repl_rest) {
++	notice("restoring old default route to %s [%I]",
++		old_def_rt.rt_dev, SIN_ADDR(old_def_rt.rt_gateway));
++        if (ioctl(sock_fd, SIOCADDRT, &old_def_rt) < 0) {
++	    if (!ok_error(errno))
++	        error("restore default route ioctl(SIOCADDRT): %m");
++	    return 0;
++        }
++        default_rt_repl_rest = 0;
++    }
+ 
+     return 1;
+ }
+diff --git a/pppd/sys-solaris.c b/pppd/sys-solaris.c
+index add4423..91677fe 100644
+--- a/pppd/sys-solaris.c
++++ b/pppd/sys-solaris.c
+@@ -2036,12 +2036,18 @@ cifaddr(u, o, h)
+  * sifdefaultroute - assign a default route through the address given.
+  */
+ int
+-sifdefaultroute(u, l, g)
++sifdefaultroute(u, l, g, replace)
+     int u;
+     u_int32_t l, g;
++    bool replace;
+ {
+     struct rtentry rt;
+ 
++    if (replace) {
++	error("replacedefaultroute not supported on this platform");
++	return 0;
++    }
++
+ #if defined(__USLC__)
+     g = l;			/* use the local address as gateway */
+ #endif
diff --git a/recipes/ppp/ppp-2.4.5/enable-ipv6.patch b/recipes/ppp/ppp-2.4.5/enable-ipv6.patch
new file mode 100644
index 0000000000..7b8acb2dd0
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/enable-ipv6.patch
@@ -0,0 +1,11 @@
+--- ppp-2.4.3/pppd/Makefile.linux.orig	2005-10-28 21:07:40.396359250 +0100
++++ ppp-2.4.3/pppd/Makefile.linux	2005-10-28 21:07:54.217223000 +0100
+@@ -62,7 +62,7 @@
+ 
+ HAS_SHADOW=y
+ #USE_PAM=y
+-#HAVE_INET6=y
++HAVE_INET6=y
+ 
+ # Enable plugins
+ PLUGIN=y
diff --git a/recipes/ppp/ppp-2.4.5/ldflags.patch b/recipes/ppp/ppp-2.4.5/ldflags.patch
new file mode 100644
index 0000000000..37edafe511
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/ldflags.patch
@@ -0,0 +1,48 @@
+diff --git a/pppd/plugins/Makefile.linux b/pppd/plugins/Makefile.linux
+index 0a7ec7b..391921b 100644
+--- a/pppd/plugins/Makefile.linux
++++ b/pppd/plugins/Makefile.linux
+@@ -1,7 +1,7 @@
+ #CC	= gcc
+ COPTS	= -O2 -g
+ CFLAGS	= $(COPTS) -I.. -I../../include -fPIC
+-LDFLAGS	= -shared
++#LDFLAGS	+= -shared
+ INSTALL	= install
+ 
+ DESTDIR = $(INSTROOT)@DESTDIR@
+@@ -23,7 +23,7 @@ all:	$(PLUGINS)
+ 	for d in $(SUBDIRS); do $(MAKE) $(MFLAGS) -C $$d all; done
+ 
+ %.so: %.c
+-	$(CC) -o $@ $(LDFLAGS) $(CFLAGS) $^
++	$(CC) -o $@ $(LDFLAGS) $(CFLAGS) -shared $^
+ 
+ VERSION = $(shell awk -F '"' '/VERSION/ { print $$2; }' ../patchlevel.h)
+ 
+diff --git a/pppd/plugins/pppoatm/Makefile.linux b/pppd/plugins/pppoatm/Makefile.linux
+index 20f62e6..7150251 100644
+--- a/pppd/plugins/pppoatm/Makefile.linux
++++ b/pppd/plugins/pppoatm/Makefile.linux
+@@ -1,7 +1,7 @@
+ #CC	= gcc
+ COPTS	= -O2 -g
+ CFLAGS	= $(COPTS) -I../.. -I../../../include -fPIC
+-LDFLAGS	= -shared
++#LDFLAGS	+= -shared
+ INSTALL	= install
+ 
+ #***********************************************************************
+diff --git a/pppd/plugins/pppol2tp/Makefile.linux b/pppd/plugins/pppol2tp/Makefile.linux
+index 19eff67..5b0dfcc 100644
+--- a/pppd/plugins/pppol2tp/Makefile.linux
++++ b/pppd/plugins/pppol2tp/Makefile.linux
+@@ -1,7 +1,7 @@
+ #CC	= gcc
+ COPTS	= -O2 -g
+ CFLAGS	= $(COPTS) -I. -I../.. -I../../../include -fPIC
+-LDFLAGS	= -shared
++#LDFLAGS	+= -shared
+ INSTALL	= install
+ 
+ #***********************************************************************
diff --git a/recipes/ppp/ppp-2.4.5/makefile-remove-hard-usr-reference.patch b/recipes/ppp/ppp-2.4.5/makefile-remove-hard-usr-reference.patch
new file mode 100644
index 0000000000..b907002f48
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/makefile-remove-hard-usr-reference.patch
@@ -0,0 +1,28 @@
+--- ppp-2.4.4/pppd/Makefile.linux.orig	2009-08-24 14:28:02.000000000 -0400
++++ ppp-2.4.4/pppd/Makefile.linux	2009-08-24 14:42:58.000000000 -0400	
+@@ -117,10 +117,10 @@
+ #LIBS     += -lshadow $(LIBS)
+ endif
+ 
+-ifneq ($(wildcard /usr/include/crypt.h),)
++#ifneq ($(wildcard /usr/include/crypt.h),)
+ CFLAGS  += -DHAVE_CRYPT_H=1
+ LIBS	+= -lcrypt
+-endif
++#endif
+ 
+ ifdef NEEDDES
+ ifndef USE_CRYPT
+@@ -169,10 +169,10 @@
+ endif
+ 
+ ifdef FILTER
+-ifneq ($(wildcard /usr/include/pcap-bpf.h),)
++#ifneq ($(wildcard /usr/include/pcap-bpf.h),)
+ LIBS    += -lpcap
+ CFLAGS  += -DPPP_FILTER
+-endif
++#endif
+ endif
+ 
+ ifdef HAVE_INET6
diff --git a/recipes/ppp/ppp-2.4.5/makefile.patch b/recipes/ppp/ppp-2.4.5/makefile.patch
new file mode 100644
index 0000000000..968fe536cb
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/makefile.patch
@@ -0,0 +1,86 @@
+Removes Strip during install
+
+--- ppp-2.4.4/chat/Makefile.linux.old	2009-08-24 15:10:52.000000000 -0400
++++ ppp-2.4.4/chat/Makefile.linux	2009-08-24 15:11:01.000000000 -0400
+@@ -25,7 +25,7 @@
+ 
+ install: chat
+ 	mkdir -p $(BINDIR) $(MANDIR)
+-	$(INSTALL) -s -c chat $(BINDIR)
++	$(INSTALL) -c chat $(BINDIR)
+ 	$(INSTALL) -c -m 644 chat.8 $(MANDIR)
+ 
+ clean:
+--- ppp-2.4.4/pppd/Makefile.linux.old	2009-08-24 15:12:01.000000000 -0400
++++ ppp-2.4.4/pppd/Makefile.linux	2009-08-24 15:13:03.000000000 -0400
+@@ -99,7 +99,7 @@
+ CFLAGS	+= -DUSE_SRP -DOPENSSL -I/usr/local/ssl/include
+ LIBS	+= -lsrp -L/usr/local/ssl/lib -lcrypto
+ TARGETS	+= srp-entry
+-EXTRAINSTALL = $(INSTALL) -s -c -m 555 srp-entry $(BINDIR)/srp-entry
++EXTRAINSTALL = $(INSTALL) -c -m 555 srp-entry $(BINDIR)/srp-entry
+ MANPAGES += srp-entry.8
+ EXTRACLEAN += srp-entry.o
+ NEEDDES=y
+@@ -200,7 +200,7 @@
+ install: pppd
+ 	mkdir -p $(BINDIR) $(MANDIR)
+ 	$(EXTRAINSTALL)
+-	$(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd
++	$(INSTALL) -c -m 555 pppd $(BINDIR)/pppd
+ 	if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \
+ 	  chmod o-rx,u+s $(BINDIR)/pppd; fi
+ 	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)
+--- ppp-2.4.4/pppdump/Makefile.linux.old	2009-08-24 15:14:06.000000000 -0400
++++ ppp-2.4.4/pppdump/Makefile.linux	2009-08-24 15:14:15.000000000 -0400
+@@ -17,5 +17,5 @@
+ 
+ install:
+ 	mkdir -p $(BINDIR) $(MANDIR)
+-	$(INSTALL) -s -c pppdump $(BINDIR)
++	$(INSTALL) -c pppdump $(BINDIR)
+ 	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)
+--- ppp-2.4.4/pppstats/Makefile.linux.old	2009-08-24 15:14:41.000000000 -0400
++++ ppp-2.4.4/pppstats/Makefile.linux	2009-08-24 15:14:47.000000000 -0400
+@@ -22,7 +22,7 @@
+ 
+ install: pppstats
+ 	-mkdir -p $(MANDIR)
+-	$(INSTALL) -s -c pppstats $(BINDIR)
++	$(INSTALL) -c pppstats $(BINDIR)
+ 	$(INSTALL) -c -m 444 pppstats.8 $(MANDIR)
+ 
+ pppstats: $(PPPSTATSRCS)
+--- ppp-2.4.4/pppd/plugins/rp-pppoe/Makefile.linux.old	2009-08-24 15:16:03.000000000 -0400
++++ ppp-2.4.4/pppd/plugins/rp-pppoe/Makefile.linux	2009-08-24 15:16:18.000000000 -0400
+@@ -39,9 +39,9 @@
+ 
+ install: all
+ 	$(INSTALL) -d -m 755 $(LIBDIR)
+-	$(INSTALL) -s -c -m 4550 rp-pppoe.so $(LIBDIR)
++	$(INSTALL) -c -m 4550 rp-pppoe.so $(LIBDIR)
+ 	$(INSTALL) -d -m 755 $(BINDIR)
+-	$(INSTALL) -s -c -m 555 pppoe-discovery $(BINDIR)
++	$(INSTALL) -c -m 555 pppoe-discovery $(BINDIR)
+ 
+ clean:
+ 	rm -f *.o *.so
+--- ppp-2.4.4/pppd/plugins/radius/Makefile.linux.old	2009-08-24 15:16:41.000000000 -0400
++++ ppp-2.4.4/pppd/plugins/radius/Makefile.linux	2009-08-24 15:17:10.000000000 -0400
+@@ -36,11 +36,11 @@
+ 
+ install: all
+ 	$(INSTALL) -d -m 755 $(LIBDIR)
+-	$(INSTALL) -s -c -m 755 radius.so $(LIBDIR)
+-	$(INSTALL) -s -c -m 755 radattr.so $(LIBDIR)
+-	$(INSTALL) -s -c -m 755 radrealms.so $(LIBDIR)
+-	$(INSTALL) -c -m 444 pppd-radius.8 $(MANDIR)
+-	$(INSTALL) -c -m 444 pppd-radattr.8 $(MANDIR)
++	$(INSTALL) -c -m 755 radius.so $(LIBDIR)
++	$(INSTALL) -c -m 755 radattr.so $(LIBDIR)
++	$(INSTALL) -c -m 755 radrealms.so $(LIBDIR)
++	$(INSTALL) -m 444 pppd-radius.8 $(MANDIR)
++	$(INSTALL) -m 444 pppd-radattr.8 $(MANDIR)
+ 
+ radius.so: radius.o libradiusclient.a
+ 	$(CC) $(LDFLAGS) -o radius.so -shared radius.o libradiusclient.a
diff --git a/recipes/ppp/ppp-2.4.5/ppp-2.4.4-mppe-mppc.1.1.patch b/recipes/ppp/ppp-2.4.5/ppp-2.4.4-mppe-mppc.1.1.patch
new file mode 100644
index 0000000000..89fda32868
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/ppp-2.4.4-mppe-mppc.1.1.patch
@@ -0,0 +1,1567 @@
+Source: http://gaute.vetsj.com/tag/mppc/
+
+diff -urN ppp-2.4.4-old/include/linux/ppp-comp.h ppp-2.4.4-new/include/linux/ppp-comp.h
+--- ppp-2.4.4-old/include/linux/ppp-comp.h	2002-12-06 10:49:15.000000000 +0100
++++ ppp-2.4.4-new/include/linux/ppp-comp.h	2008-03-19 20:11:28.000000000 +0100
+@@ -36,7 +36,7 @@
+  */
+ 
+ /*
+- *  ==FILEVERSION 20020319==
++ *  ==FILEVERSION 20020715==
+  *
+  *  NOTE TO MAINTAINERS:
+  *     If you modify this file at all, please set the above date.
+@@ -86,7 +86,7 @@
+ 
+ 	/* Compress a packet */
+ 	int     (*compress) (void *state, unsigned char *rptr,
+-			      unsigned char *obuf, int isize, int osize);
++			     unsigned char *obuf, int isize, int osize);
+ 
+ 	/* Return compression statistics */
+ 	void	(*comp_stat) (void *state, struct compstat *stats);
+@@ -107,7 +107,7 @@
+ 
+ 	/* Decompress a packet. */
+ 	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
+-				unsigned char *obuf, int osize);
++			       unsigned char *obuf, int osize);
+ 
+ 	/* Update state for an incompressible packet received */
+ 	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
+@@ -288,6 +288,33 @@
+ 	    opts |= MPPE_OPT_UNKNOWN;		\
+     } while (/* CONSTCOND */ 0)
+ 
++/* MPPE/MPPC definitions by J.D.*/
++#define MPPE_STATELESS          MPPE_H_BIT	/* configuration bit H */
++#define MPPE_40BIT              MPPE_L_BIT	/* configuration bit L */
++#define MPPE_56BIT              MPPE_M_BIT	/* configuration bit M */
++#define MPPE_128BIT             MPPE_S_BIT	/* configuration bit S */
++#define MPPE_MPPC               MPPE_C_BIT	/* configuration bit C */
++
++/*
++ * Definitions for Stac LZS.
++ */
++
++#define CI_LZS			17	/* config option for Stac LZS */
++#define CILEN_LZS		5	/* length of config option */
++
++#define LZS_OVHD		4	/* max. LZS overhead */
++#define LZS_HIST_LEN		2048	/* LZS history size */
++#define LZS_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
++
++#define LZS_MODE_NONE		0
++#define LZS_MODE_LCB		1
++#define LZS_MODE_CRC		2
++#define LZS_MODE_SEQ		3
++#define LZS_MODE_EXT		4
++
++#define LZS_EXT_BIT_FLUSHED	0x80	/* bit A */
++#define LZS_EXT_BIT_COMP	0x20	/* bit C */
++
+ /*
+  * Definitions for other, as yet unsupported, compression methods.
+  */
+diff -urN ppp-2.4.4-old/include/net/ppp-comp.h ppp-2.4.4-new/include/net/ppp-comp.h
+--- ppp-2.4.4-old/include/net/ppp-comp.h	2002-12-06 10:49:15.000000000 +0100
++++ ppp-2.4.4-new/include/net/ppp-comp.h	2008-03-19 20:11:28.000000000 +0100
+@@ -255,6 +255,33 @@
+ 	    opts |= MPPE_OPT_UNKNOWN;		\
+     } while (/* CONSTCOND */ 0)
+ 
++/* MPPE/MPPC definitions by J.D.*/
++#define MPPE_STATELESS          MPPE_H_BIT	/* configuration bit H */
++#define MPPE_40BIT              MPPE_L_BIT	/* configuration bit L */
++#define MPPE_56BIT              MPPE_M_BIT	/* configuration bit M */
++#define MPPE_128BIT             MPPE_S_BIT	/* configuration bit S */
++#define MPPE_MPPC               MPPE_C_BIT	/* configuration bit C */
++
++/*
++ * Definitions for Stac LZS.
++ */
++
++#define CI_LZS			17	/* config option for Stac LZS */
++#define CILEN_LZS		5	/* length of config option */
++
++#define LZS_OVHD		4	/* max. LZS overhead */
++#define LZS_HIST_LEN		2048	/* LZS history size */
++#define LZS_MAX_CCOUNT		0x0FFF	/* max. coherency counter value */
++
++#define LZS_MODE_NONE		0
++#define LZS_MODE_LCB		1
++#define LZS_MODE_CRC		2
++#define LZS_MODE_SEQ		3
++#define LZS_MODE_EXT		4
++
++#define LZS_EXT_BIT_FLUSHED	0x80	/* bit A */
++#define LZS_EXT_BIT_COMP	0x20	/* bit C */
++
+ /*
+  * Definitions for other, as yet unsupported, compression methods.
+  */
+diff -urN ppp-2.4.4-old/pppd/ccp.c ppp-2.4.4-new/pppd/ccp.c
+--- ppp-2.4.4-old/pppd/ccp.c	2005-07-09 02:23:05.000000000 +0200
++++ ppp-2.4.4-new/pppd/ccp.c	2008-03-19 20:11:43.000000000 +0100
+@@ -62,12 +62,10 @@
+ static char bsd_value[8];
+ static char deflate_value[8];
+ 
+-/*
+- * Option variables.
+- */
+ #ifdef MPPE
+-bool refuse_mppe_stateful = 1;		/* Allow stateful mode? */
+-#endif
++static int setmppe(char **);
++static int setnomppe(void);
++#endif /* MPPE */
+ 
+ static option_t ccp_option_list[] = {
+     { "noccp", o_bool, &ccp_protent.enabled_flag,
+@@ -108,54 +106,36 @@
+       "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
+       &ccp_allowoptions[0].predictor_1 },
+ 
++    { "lzs", o_bool, &ccp_wantoptions[0].lzs,
++      "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_PRIO },
++    { "+lzs", o_bool, &ccp_wantoptions[0].lzs,
++      "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_ALIAS | OPT_PRIO },
++    { "nolzs", o_bool, &ccp_wantoptions[0].lzs,
++      "don't allow Stac LZS", OPT_PRIOSUB | OPT_A2CLR,
++      &ccp_allowoptions[0].lzs },
++    { "-lzs", o_bool, &ccp_wantoptions[0].lzs,
++      "don't allow Stac LZS", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
++      &ccp_allowoptions[0].lzs },
++
+ #ifdef MPPE
+-    /* MPPE options are symmetrical ... we only set wantoptions here */
+-    { "require-mppe", o_bool, &ccp_wantoptions[0].mppe,
+-      "require MPPE encryption",
+-      OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
+-    { "+mppe", o_bool, &ccp_wantoptions[0].mppe,
+-      "require MPPE encryption",
+-      OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
+-    { "nomppe", o_bool, &ccp_wantoptions[0].mppe,
+-      "don't allow MPPE encryption", OPT_PRIO },
+-    { "-mppe", o_bool, &ccp_wantoptions[0].mppe,
+-      "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO },
+-
+-    /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */
+-    { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
+-      "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
+-      &ccp_wantoptions[0].mppe },
+-    { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe,
+-      "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
+-      &ccp_wantoptions[0].mppe },
+-    { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe,
+-      "don't allow MPPE 40-bit encryption",
+-      OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe },
+-    { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
+-      "don't allow MPPE 40-bit encryption",
+-      OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40,
+-      &ccp_wantoptions[0].mppe },
+-
+-    { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
+-      "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
+-      &ccp_wantoptions[0].mppe },
+-    { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe,
+-      "require MPPE 128-bit encryption",
+-      OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
+-      &ccp_wantoptions[0].mppe },
+-    { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe,
+-      "don't allow MPPE 128-bit encryption",
+-      OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe },
+-    { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
+-      "don't allow MPPE 128-bit encryption",
+-      OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128,
+-      &ccp_wantoptions[0].mppe },
+-
+-    /* strange one; we always request stateless, but will we allow stateful? */
+-    { "mppe-stateful", o_bool, &refuse_mppe_stateful,
+-      "allow MPPE stateful mode", OPT_PRIO },
+-    { "nomppe-stateful", o_bool, &refuse_mppe_stateful,
+-      "disallow MPPE stateful mode", OPT_PRIO | 1 },
++    { "mppc", o_bool, &ccp_wantoptions[0].mppc,
++      "request MPPC compression", 1, &ccp_allowoptions[0].mppc },
++    { "+mppc", o_bool, &ccp_wantoptions[0].mppc,
++      "request MPPC compression", 1, &ccp_allowoptions[0].mppc, OPT_ALIAS },
++    { "nomppc", o_bool, &ccp_wantoptions[0].mppc,
++      "don't allow MPPC compression", OPT_PRIOSUB | OPT_A2CLR,
++      &ccp_allowoptions[0].mppc },
++    { "-mppc", o_bool, &ccp_wantoptions[0].mppc,
++      "don't allow MPPC compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
++      &ccp_allowoptions[0].mppc },
++    { "mppe", o_special, (void *)setmppe,
++      "request MPPE encryption" },
++    { "+mppe", o_special, (void *)setmppe,
++      "request MPPE encryption" },
++    { "nomppe", o_special_noarg, (void *)setnomppe,
++      "don't allow MPPE encryption" },
++    { "-mppe", o_special_noarg, (void *)setnomppe,
++      "don't allow MPPE encryption" },
+ #endif /* MPPE */
+ 
+     { NULL }
+@@ -241,7 +221,7 @@
+  */
+ #define ANY_COMPRESS(opt)	((opt).deflate || (opt).bsd_compress \
+ 				 || (opt).predictor_1 || (opt).predictor_2 \
+-				 || (opt).mppe)
++				 || (opt).lzs || (opt).mppc || (opt).mppe)
+ 
+ /*
+  * Local state (mainly for handling reset-reqs and reset-acks).
+@@ -344,6 +324,100 @@
+     return 1;
+ }
+ 
++#ifdef MPPE
++/*
++ * Functions called from config options
++ */
++/* 
++   MPPE suboptions:
++	required - require MPPE; disconnect if peer doesn't support it
++	stateless - use stateless mode
++	no40 - disable 40 bit keys
++	no56 - disable 56 bit keys
++	no128 - disable 128 bit keys
++*/
++int setmppe(char **argv)
++{
++    int i;
++    char *str, cmdbuf[16];
++
++    ccp_allowoptions[0].mppe = 1;
++    ccp_allowoptions[0].mppe_40 = 1;
++    ccp_allowoptions[0].mppe_56 = 1;
++    ccp_allowoptions[0].mppe_128 = 1;
++    ccp_allowoptions[0].mppe_stateless = 0;
++    ccp_wantoptions[0].mppe = 0;
++
++    str = *argv;
++
++    while (1) {
++	i = 0;
++	memset(cmdbuf, '\0', 16);
++	while ((i < 16) && (*str != ',') && (*str != '\0'))
++	    cmdbuf[i++] = *str++;
++	cmdbuf[i] = '\0';
++	if (!strncasecmp(cmdbuf, "no40", strlen("no40"))) {
++	    ccp_allowoptions[0].mppe_40 = 0;
++	    goto next_param;
++	} else if (!strncasecmp(cmdbuf, "no56", strlen("no56"))) {
++	    ccp_allowoptions[0].mppe_56 = 0;
++	    goto next_param;
++	} else if (!strncasecmp(cmdbuf, "no128", strlen("no128"))) {
++	    ccp_allowoptions[0].mppe_128 = 0;
++	    goto next_param;
++	} else if (!strncasecmp(cmdbuf, "stateless", strlen("stateless"))) {
++	    ccp_allowoptions[0].mppe_stateless = 1;
++	    goto next_param;
++	} else if (!strncasecmp(cmdbuf, "required", strlen("required"))) {
++	    ccp_wantoptions[0].mppe = 1;
++	    goto next_param;
++	} else {
++	    option_error("invalid parameter '%s' for mppe option", cmdbuf);
++	    return 0;
++	}
++
++    next_param:
++	if (*str == ',') {
++	    str++;
++	    continue;
++	}
++	if (*str == '\0') {
++	    if (!(ccp_allowoptions[0].mppe_40 || ccp_allowoptions[0].mppe_56 ||
++		  ccp_allowoptions[0].mppe_128)) {
++		if (ccp_wantoptions[0].mppe == 1) {
++		    option_error("You require MPPE but you have switched off "
++				 "all encryption key lengths.");
++		    return 0;
++		}
++		ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0;
++		ccp_wantoptions[0].mppe_stateless =
++		    ccp_allowoptions[0].mppe_stateless = 0;
++	    } else {
++		ccp_allowoptions[0].mppe = 1;
++		ccp_wantoptions[0].mppe_stateless =
++		    ccp_allowoptions[0].mppe_stateless;
++		if (ccp_wantoptions[0].mppe == 1) {
++		    ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40;
++		    ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56;
++		    ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128;
++		}
++	    }
++	    return 1;
++	}
++    }
++}
++
++int setnomppe(void)
++{
++    ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0;
++    ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40 = 0;
++    ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56 = 0;
++    ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128 = 0;
++    ccp_wantoptions[0].mppe_stateless = ccp_allowoptions[0].mppe_stateless = 0;
++    return 1;
++}
++#endif /* MPPE */
++
+ /*
+  * ccp_init - initialize CCP.
+  */
+@@ -378,6 +452,30 @@
+     ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
+ 
+     ccp_allowoptions[0].predictor_1 = 1;
++
++    ccp_wantoptions[0].lzs = 0; /* Stac LZS  - will be enabled in the future */
++    ccp_wantoptions[0].lzs_mode = LZS_MODE_SEQ;
++    ccp_wantoptions[0].lzs_hists = 1;
++    ccp_allowoptions[0].lzs = 0; /* Stac LZS  - will be enabled in the future */
++    ccp_allowoptions[0].lzs_mode = LZS_MODE_SEQ;
++    ccp_allowoptions[0].lzs_hists = 1;
++
++#ifdef MPPE
++    /* by default allow and request MPPC... */
++    ccp_wantoptions[0].mppc = ccp_allowoptions[0].mppc = 1;
++
++    /* ... and allow but don't request MPPE */
++    ccp_allowoptions[0].mppe = 1;
++    ccp_allowoptions[0].mppe_40 = 1;
++    ccp_allowoptions[0].mppe_56 = 1;
++    ccp_allowoptions[0].mppe_128 = 1;
++    ccp_allowoptions[0].mppe_stateless = 1;
++    ccp_wantoptions[0].mppe = 0;
++    ccp_wantoptions[0].mppe_40 = 0;
++    ccp_wantoptions[0].mppe_56 = 0;
++    ccp_wantoptions[0].mppe_128 = 0;
++    ccp_wantoptions[0].mppe_stateless = 0;
++#endif /* MPPE */
+ }
+ 
+ /*
+@@ -455,11 +553,11 @@
+     if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) {
+ 	notice("Compression disabled by peer.");
+ #ifdef MPPE
+-	if (ccp_gotoptions[unit].mppe) {
++	if (ccp_wantoptions[unit].mppe) {
+ 	    error("MPPE disabled, closing LCP");
+ 	    lcp_close(unit, "MPPE disabled by peer");
+ 	}
+-#endif
++#endif /* MPPE */
+     }
+ 
+     /*
+@@ -487,6 +585,15 @@
+ 	    break;
+ 	/* send a reset-ack, which the transmitter will see and
+ 	   reset its compression state. */
++
++	/* In case of MPPE/MPPC or LZS we shouldn't send CCP_RESETACK,
++	   but we do it in order to reset compressor; CCP_RESETACK is
++	   then silently discarded. See functions ppp_send_frame and
++	   ppp_ccp_peek in ppp_generic.c (Linux only !!!). All the
++	   confusion is caused by the fact that CCP code is splited
++	   into two parts - one part is handled by pppd, the other one
++	   is handled by kernel. */
++
+ 	fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
+ 	break;
+ 
+@@ -515,12 +622,11 @@
+     fsm_lowerdown(&ccp_fsm[unit]);
+ 
+ #ifdef MPPE
+-    if (ccp_gotoptions[unit].mppe) {
++    if (ccp_wantoptions[unit].mppe) {
+ 	error("MPPE required but peer negotiation failed");
+ 	lcp_close(unit, "MPPE required but peer negotiation failed");
+     }
+-#endif
+-
++#endif /* MPPE */
+ }
+ 
+ /*
+@@ -537,7 +643,7 @@
+     all_rejected[f->unit] = 0;
+ 
+ #ifdef MPPE
+-    if (go->mppe) {
++    if (go->mppe || go->mppc) {
+ 	ccp_options *ao = &ccp_allowoptions[f->unit];
+ 	int auth_mschap_bits = auth_done[f->unit];
+ 	int numbits;
+@@ -551,80 +657,109 @@
+ 	 * NB: If MPPE is required, all other compression opts are invalid.
+ 	 *     So, we return right away if we can't do it.
+ 	 */
++	if (ccp_wantoptions[f->unit].mppe) {
++	    /* Leave only the mschap auth bits set */
++	    auth_mschap_bits &= (CHAP_MS_WITHPEER  | CHAP_MS_PEER |
++				 CHAP_MS2_WITHPEER | CHAP_MS2_PEER);
++	    /* Count the mschap auths */
++	    auth_mschap_bits >>= CHAP_MS_SHIFT;
++	    numbits = 0;
++	    do {
++		numbits += auth_mschap_bits & 1;
++		auth_mschap_bits >>= 1;
++	    } while (auth_mschap_bits);
++	    if (numbits > 1) {
++		error("MPPE required, but auth done in both directions.");
++		lcp_close(f->unit, "MPPE required but not available");
++		return;
++	    }
++	    if (!numbits) {
++		error("MPPE required, but MS-CHAP[v2] auth not performed.");
++		lcp_close(f->unit, "MPPE required but not available");
++		return;
++	    }
+ 
+-	/* Leave only the mschap auth bits set */
+-	auth_mschap_bits &= (CHAP_MS_WITHPEER  | CHAP_MS_PEER |
+-			     CHAP_MS2_WITHPEER | CHAP_MS2_PEER);
+-	/* Count the mschap auths */
+-	auth_mschap_bits >>= CHAP_MS_SHIFT;
+-	numbits = 0;
+-	do {
+-	    numbits += auth_mschap_bits & 1;
+-	    auth_mschap_bits >>= 1;
+-	} while (auth_mschap_bits);
+-	if (numbits > 1) {
+-	    error("MPPE required, but auth done in both directions.");
+-	    lcp_close(f->unit, "MPPE required but not available");
+-	    return;
+-	}
+-	if (!numbits) {
+-	    error("MPPE required, but MS-CHAP[v2] auth not performed.");
+-	    lcp_close(f->unit, "MPPE required but not available");
+-	    return;
+-	}
+-
+-	/* A plugin (eg radius) may not have obtained key material. */
+-	if (!mppe_keys_set) {
+-	    error("MPPE required, but keys are not available.  "
+-		  "Possible plugin problem?");
+-	    lcp_close(f->unit, "MPPE required but not available");
+-	    return;
+-	}
+-
+-	/* LM auth not supported for MPPE */
+-	if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) {
+-	    /* This might be noise */
+-	    if (go->mppe & MPPE_OPT_40) {
+-		notice("Disabling 40-bit MPPE; MS-CHAP LM not supported");
+-		go->mppe &= ~MPPE_OPT_40;
+-		ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40;
++	    /* A plugin (eg radius) may not have obtained key material. */
++	    if (!mppe_keys_set) {
++		error("MPPE required, but keys are not available.  "
++		      "Possible plugin problem?");
++		lcp_close(f->unit, "MPPE required but not available");
++		return;
+ 	    }
+ 	}
+ 
+-	/* Last check: can we actually negotiate something? */
+-	if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) {
+-	    /* Could be misconfig, could be 40-bit disabled above. */
+-	    error("MPPE required, but both 40-bit and 128-bit disabled.");
+-	    lcp_close(f->unit, "MPPE required but not available");
+-	    return;
++	/*
++	 * Check whether the kernel knows about the various
++	 * compression methods we might request. Key material
++	 * unimportant here.
++	 */
++	if (go->mppc) {
++	    opt_buf[0] = CI_MPPE;
++	    opt_buf[1] = CILEN_MPPE;
++	    opt_buf[2] = 0;
++	    opt_buf[3] = 0;
++	    opt_buf[4] = 0;
++	    opt_buf[5] = MPPE_MPPC;
++	    if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 0) <= 0)
++		go->mppc = 0;
++	}
++	if (go->mppe_40) {
++	    opt_buf[0] = CI_MPPE;
++	    opt_buf[1] = CILEN_MPPE;
++	    opt_buf[2] = MPPE_STATELESS;
++	    opt_buf[3] = 0;
++	    opt_buf[4] = 0;
++	    opt_buf[5] = MPPE_40BIT;
++	    if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0)
++		go->mppe_40 = 0;
++	}
++	if (go->mppe_56) {
++	    opt_buf[0] = CI_MPPE;
++	    opt_buf[1] = CILEN_MPPE;
++	    opt_buf[2] = MPPE_STATELESS;
++	    opt_buf[3] = 0;
++	    opt_buf[4] = 0;
++	    opt_buf[5] = MPPE_56BIT;
++	    if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0)
++		go->mppe_56 = 0;
++	}
++	if (go->mppe_128) {
++	    opt_buf[0] = CI_MPPE;
++	    opt_buf[1] = CILEN_MPPE;
++	    opt_buf[2] = MPPE_STATELESS;
++	    opt_buf[3] = 0;
++	    opt_buf[4] = 0;
++	    opt_buf[5] = MPPE_128BIT;
++	    if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0)
++		go->mppe_128 = 0;
++	}
++	if (!go->mppe_40 && !go->mppe_56 && !go->mppe_128) {
++	    if (ccp_wantoptions[f->unit].mppe) {
++		error("MPPE required, but kernel has no support.");
++		lcp_close(f->unit, "MPPE required but not available");
++	    }
++	    go->mppe = go->mppe_stateless = 0;
++	} else {
++	    /* MPPE is not compatible with other compression types */
++	    if (ccp_wantoptions[f->unit].mppe) {
++		ao->bsd_compress = go->bsd_compress = 0;
++		ao->predictor_1  = go->predictor_1  = 0;
++		ao->predictor_2  = go->predictor_2  = 0;
++		ao->deflate	 = go->deflate	    = 0;
++		ao->lzs		 = go->lzs	    = 0;
++	    }
+ 	}
+-
+-	/* sync options */
+-	ao->mppe = go->mppe;
+-	/* MPPE is not compatible with other compression types */
+-	ao->bsd_compress = go->bsd_compress = 0;
+-	ao->predictor_1  = go->predictor_1  = 0;
+-	ao->predictor_2  = go->predictor_2  = 0;
+-	ao->deflate      = go->deflate      = 0;
+     }
+ #endif /* MPPE */
+-
+-    /*
+-     * Check whether the kernel knows about the various
+-     * compression methods we might request.
+-     */
+-#ifdef MPPE
+-    if (go->mppe) {
+-	opt_buf[0] = CI_MPPE;
+-	opt_buf[1] = CILEN_MPPE;
+-	MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
+-	/* Key material unimportant here. */
+-	if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) {
+-	    error("MPPE required, but kernel has no support.");
+-	    lcp_close(f->unit, "MPPE required but not available");
+-	}
++    if (go->lzs) {
++	opt_buf[0] = CI_LZS;
++	opt_buf[1] = CILEN_LZS;
++	opt_buf[2] = go->lzs_hists >> 8;
++	opt_buf[3] = go->lzs_hists & 0xff;
++	opt_buf[4] = LZS_MODE_SEQ;
++	if (ccp_test(f->unit, opt_buf, CILEN_LZS, 0) <= 0)
++	    go->lzs = 0;
+     }
+-#endif
+     if (go->bsd_compress) {
+ 	opt_buf[0] = CI_BSD_COMPRESS;
+ 	opt_buf[1] = CILEN_BSD_COMPRESS;
+@@ -679,7 +814,8 @@
+ 	+ (go->deflate? CILEN_DEFLATE: 0)
+ 	+ (go->predictor_1? CILEN_PREDICTOR_1: 0)
+ 	+ (go->predictor_2? CILEN_PREDICTOR_2: 0)
+-	+ (go->mppe? CILEN_MPPE: 0);
++	+ (go->lzs? CILEN_LZS: 0)
++	+ ((go->mppe || go->mppc)? CILEN_MPPE: 0);
+ }
+ 
+ /*
+@@ -693,6 +829,8 @@
+ {
+     int res;
+     ccp_options *go = &ccp_gotoptions[f->unit];
++    ccp_options *ao = &ccp_allowoptions[f->unit];
++    ccp_options *wo = &ccp_wantoptions[f->unit];
+     u_char *p0 = p;
+ 
+     /*
+@@ -701,22 +839,43 @@
+      * in case it gets Acked.
+      */
+ #ifdef MPPE
+-    if (go->mppe) {
++    if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) {
+ 	u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
+ 
+-	p[0] = opt_buf[0] = CI_MPPE;
+-	p[1] = opt_buf[1] = CILEN_MPPE;
+-	MPPE_OPTS_TO_CI(go->mppe, &p[2]);
+-	MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
++	p[0] = CI_MPPE;
++	p[1] = CILEN_MPPE;
++	p[2] = (go->mppe_stateless ? MPPE_STATELESS : 0);
++	p[3] = 0;
++	p[4] = 0;
++	p[5] = (go->mppe_40 ? MPPE_40BIT : 0) | (go->mppe_56 ? MPPE_56BIT : 0) |
++	    (go->mppe_128 ? MPPE_128BIT : 0) | (go->mppc ? MPPE_MPPC : 0);
++
++	BCOPY(p, opt_buf, CILEN_MPPE);
+ 	BCOPY(mppe_recv_key, &opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN);
+ 	res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0);
+-	if (res > 0)
++	if (res > 0) {
+ 	    p += CILEN_MPPE;
+-	else
++	} else {
+ 	    /* This shouldn't happen, we've already tested it! */
+-	    lcp_close(f->unit, "MPPE required but not available in kernel");
++	    go->mppe = go->mppe_40 = go->mppe_56 = go->mppe_128 =
++		go->mppe_stateless = go->mppc = 0;
++	    if (ccp_wantoptions[f->unit].mppe)
++		lcp_close(f->unit, "MPPE required but not available in kernel");
++	}
++    }
++#endif /* MPPE */
++    if (go->lzs) {
++	p[0] = CI_LZS;
++	p[1] = CILEN_LZS;
++	p[2] = go->lzs_hists >> 8;
++	p[3] = go->lzs_hists & 0xff;
++	p[4] = LZS_MODE_SEQ;
++	res = ccp_test(f->unit, p, CILEN_LZS, 0);
++	if (res > 0) {
++	    p += CILEN_LZS;
++	} else
++	    go->lzs = 0;
+     }
+-#endif
+     if (go->deflate) {
+ 	p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
+ 	p[1] = CILEN_DEFLATE;
+@@ -802,7 +961,7 @@
+ 
+ /*
+  * ccp_ackci - process a received configure-ack, and return
+- * 1 iff the packet was OK.
++ * 1 if the packet was OK.
+  */
+ static int
+ ccp_ackci(f, p, len)
+@@ -811,24 +970,44 @@
+     int len;
+ {
+     ccp_options *go = &ccp_gotoptions[f->unit];
++    ccp_options *ao = &ccp_allowoptions[f->unit];
++    ccp_options *wo = &ccp_wantoptions[f->unit];
+     u_char *p0 = p;
+ 
+ #ifdef MPPE
+-    if (go->mppe) {
+-	u_char opt_buf[CILEN_MPPE];
+-
+-	opt_buf[0] = CI_MPPE;
+-	opt_buf[1] = CILEN_MPPE;
+-	MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
+-	if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE))
++    if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) {
++	if (len < CILEN_MPPE
++	    || p[1] != CILEN_MPPE || p[0] != CI_MPPE
++	    || p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0)
++	    || p[3] != 0
++	    || p[4] != 0
++	    || (p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) |
++			 (go->mppc ? MPPE_MPPC : 0))
++		&& p[5] != ((go->mppe_56 ? MPPE_56BIT : 0) |
++			    (go->mppc ? MPPE_MPPC : 0))
++		&& p[5] != ((go->mppe_128 ? MPPE_128BIT : 0) |
++			    (go->mppc ? MPPE_MPPC : 0))))
+ 	    return 0;
++	if (go->mppe_40 || go->mppe_56 || go->mppe_128)
++	    go->mppe = 1;
+ 	p += CILEN_MPPE;
+ 	len -= CILEN_MPPE;
++	/* Cope with first/fast ack */
++	if (p == p0 && len == 0)
++	    return 1;
++    }
++#endif /* MPPE */
++    if (go->lzs) {
++	if (len < CILEN_LZS || p[0] != CI_LZS || p[1] != CILEN_LZS
++	    || p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff)
++	    || p[4] != LZS_MODE_SEQ)
++	    return 0;
++	p += CILEN_LZS;
++	len -= CILEN_LZS;
+ 	/* XXX Cope with first/fast ack */
+-	if (len == 0)
++	if (p == p0 && len == 0)
+ 	    return 1;
+     }
+-#endif
+     if (go->deflate) {
+ 	if (len < CILEN_DEFLATE
+ 	    || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
+@@ -891,7 +1070,7 @@
+ 
+ /*
+  * ccp_nakci - process received configure-nak.
+- * Returns 1 iff the nak was OK.
++ * Returns 1 if the nak was OK.
+  */
+ static int
+ ccp_nakci(f, p, len, treat_as_reject)
+@@ -901,6 +1080,8 @@
+     int treat_as_reject;
+ {
+     ccp_options *go = &ccp_gotoptions[f->unit];
++    ccp_options *ao = &ccp_allowoptions[f->unit];
++    ccp_options *wo = &ccp_wantoptions[f->unit];
+     ccp_options no;		/* options we've seen already */
+     ccp_options try;		/* options to ask for next time */
+ 
+@@ -908,28 +1089,100 @@
+     try = *go;
+ 
+ #ifdef MPPE
+-    if (go->mppe && len >= CILEN_MPPE
+-	&& p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
+-	no.mppe = 1;
+-	/*
+-	 * Peer wants us to use a different strength or other setting.
+-	 * Fail if we aren't willing to use his suggestion.
+-	 */
+-	MPPE_CI_TO_OPTS(&p[2], try.mppe);
+-	if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful) {
+-	    error("Refusing MPPE stateful mode offered by peer");
+-	    try.mppe = 0;
+-	} else if (((go->mppe | MPPE_OPT_STATEFUL) & try.mppe) != try.mppe) {
+-	    /* Peer must have set options we didn't request (suggest) */
+-	    try.mppe = 0;
+-	}
++    if ((go->mppe || go->mppc || (!wo->mppe && ao->mppe)) &&
++	len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
+ 
+-	if (!try.mppe) {
+-	    error("MPPE required but peer negotiation failed");
+-	    lcp_close(f->unit, "MPPE required but peer negotiation failed");
++	if (go->mppc) {
++	    no.mppc = 1;
++	    if (!(p[5] & MPPE_MPPC))
++		try.mppc = 0;
++	}
++
++	if (go->mppe)
++	    no.mppe = 1;
++	if (go->mppe_40)
++	    no.mppe_40 = 1;
++	if (go->mppe_56)
++	    no.mppe_56 = 1;
++	if (go->mppe_128)
++	    no.mppe_128 = 1;
++	if (go->mppe_stateless)
++	    no.mppe_stateless = 1;
++
++	if (ao->mppe_40) {
++	    if ((p[5] & MPPE_40BIT))
++		try.mppe_40 = 1;
++	    else
++		try.mppe_40 = (p[5] == 0) ? 1 : 0;
++	}
++	if (ao->mppe_56) {
++	    if ((p[5] & MPPE_56BIT))
++		try.mppe_56 = 1;
++	    else
++		try.mppe_56 = (p[5] == 0) ? 1 : 0;
++	}
++	if (ao->mppe_128) {
++	    if ((p[5] & MPPE_128BIT))
++		try.mppe_128 = 1;
++	    else
++		try.mppe_128 = (p[5] == 0) ? 1 : 0;
++	}
++
++	if (ao->mppe_stateless) {
++	    if ((p[2] & MPPE_STATELESS) || wo->mppe_stateless)
++		try.mppe_stateless = 1;
++	    else
++		try.mppe_stateless = 0;
++	}
++
++	if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) {
++	    try.mppe = try.mppe_stateless = 0;
++	    if (wo->mppe) {
++		/* we require encryption, but peer doesn't support it
++		   so we close connection */
++		wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 =
++		    wo->mppe_56 = wo->mppe_128 = 0;
++		lcp_close(f->unit, "MPPE required but cannot negotiate MPPE "
++			  "key length");
++	    }
++        }
++	if (wo->mppe && (wo->mppe_40 != try.mppe_40) &&
++	    (wo->mppe_56 != try.mppe_56) && (wo->mppe_128 != try.mppe_128)) {
++	    /* cannot negotiate key length */
++	    wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 =
++		wo->mppe_56 = wo->mppe_128 = 0;
++	    lcp_close(f->unit, "Cannot negotiate MPPE key length");
+ 	}
++	if (try.mppe_40 && try.mppe_56 && try.mppe_128)
++	    try.mppe_40 = try.mppe_56 = 0;
++	else
++	    if (try.mppe_56 && try.mppe_128)
++		try.mppe_56 = 0;
++	    else
++		if (try.mppe_40 && try.mppe_128)
++		    try.mppe_40 = 0;
++		else
++		    if (try.mppe_40 && try.mppe_56)
++			try.mppe_40 = 0;
++
++	p += CILEN_MPPE;
++	len -= CILEN_MPPE;
+     }
+ #endif /* MPPE */
++
++    if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) {
++	no.lzs = 1;
++	if (((p[2]<<8)|p[3]) > 1 || (p[4] != LZS_MODE_SEQ &&
++				     p[4] != LZS_MODE_EXT))
++	    try.lzs = 0;
++	else {
++	    try.lzs_mode = p[4];
++	    try.lzs_hists = (p[2] << 8) | p[3];
++	}
++	p += CILEN_LZS;
++	len -= CILEN_LZS;
++    }
++
+     if (go->deflate && len >= CILEN_DEFLATE
+ 	&& p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
+ 	&& p[1] == CILEN_DEFLATE) {
+@@ -1002,14 +1255,50 @@
+ 	return -1;
+ 
+ #ifdef MPPE
+-    if (go->mppe && len >= CILEN_MPPE
++    if ((go->mppe || go->mppc) && len >= CILEN_MPPE
+ 	&& p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
+-	error("MPPE required but peer refused");
+-	lcp_close(f->unit, "MPPE required but peer refused");
++	ccp_options *wo = &ccp_wantoptions[f->unit];
++	if (p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) ||
++	    p[3] != 0 ||
++	    p[4] != 0 ||
++	    p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) |
++		     (go->mppe_56 ? MPPE_56BIT : 0) |
++		     (go->mppe_128 ? MPPE_128BIT : 0) |
++		     (go->mppc ? MPPE_MPPC : 0)))
++	    return 0;
++	if (go->mppc)
++	    try.mppc = 0;
++	if (go->mppe) {
++	    try.mppe = 0;
++	    if (go->mppe_40)
++		try.mppe_40 = 0;
++	    if (go->mppe_56)
++		try.mppe_56 = 0;
++	    if (go->mppe_128)
++		try.mppe_128 = 0;
++	    if (go->mppe_stateless)
++		try.mppe_stateless = 0;
++	    if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128)
++		try.mppe = try.mppe_stateless = 0;
++	    if (wo->mppe) { /* we want MPPE but cannot negotiate key length */
++		wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 =
++		    wo->mppe_56 = wo->mppe_128 = 0;
++		lcp_close(f->unit, "MPPE required but cannot negotiate MPPE "
++			  "key length");
++	    }
++	}
+ 	p += CILEN_MPPE;
+ 	len -= CILEN_MPPE;
+     }
+-#endif
++#endif /* MPPE */
++    if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) {
++	if (p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) 
++	    || p[4] != go->lzs_mode)
++	    return 0;
++	try.lzs = 0;
++	p += CILEN_LZS;
++	len -= CILEN_LZS;
++    }
+     if (go->deflate_correct && len >= CILEN_DEFLATE
+ 	&& p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) {
+ 	if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
+@@ -1073,14 +1362,15 @@
+     int dont_nak;
+ {
+     int ret, newret, res;
+-    u_char *p0, *retp;
++    u_char *p0, *retp, p2, p5;
+     int len, clen, type, nb;
+     ccp_options *ho = &ccp_hisoptions[f->unit];
+     ccp_options *ao = &ccp_allowoptions[f->unit];
++    ccp_options *wo = &ccp_wantoptions[f->unit];
+ #ifdef MPPE
+-    bool rej_for_ci_mppe = 1;	/* Are we rejecting based on a bad/missing */
+-				/* CI_MPPE, or due to other options?       */
+-#endif
++    u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
++/*     int mtu; */
++#endif /* MPPE */
+ 
+     ret = CONFACK;
+     retp = p0 = p;
+@@ -1103,106 +1393,276 @@
+ 	    switch (type) {
+ #ifdef MPPE
+ 	    case CI_MPPE:
+-		if (!ao->mppe || clen != CILEN_MPPE) {
++		if ((!ao->mppc && !ao->mppe) || clen != CILEN_MPPE) {
+ 		    newret = CONFREJ;
+ 		    break;
+ 		}
+-		MPPE_CI_TO_OPTS(&p[2], ho->mppe);
+ 
+-		/* Nak if anything unsupported or unknown are set. */
+-		if (ho->mppe & MPPE_OPT_UNSUPPORTED) {
++ 		p2 = p[2];
++ 		p5 = p[5];
++ 		/* not sure what they want, tell 'em what we got */
++ 		if (((p[2] & ~MPPE_STATELESS) != 0 || p[3] != 0 || p[4] != 0 ||
++ 		     (p[5] & ~(MPPE_40BIT | MPPE_56BIT | MPPE_128BIT |
++ 			       MPPE_MPPC)) != 0 || p[5] == 0) ||
++ 		    (p[2] == 0 && p[3] == 0 && p[4] == 0 &&  p[5] == 0)) {
+ 		    newret = CONFNAK;
+-		    ho->mppe &= ~MPPE_OPT_UNSUPPORTED;
+-		}
+-		if (ho->mppe & MPPE_OPT_UNKNOWN) {
+-		    newret = CONFNAK;
+-		    ho->mppe &= ~MPPE_OPT_UNKNOWN;
+-		}
+-
+-		/* Check state opt */
+-		if (ho->mppe & MPPE_OPT_STATEFUL) {
+-		    /*
+-		     * We can Nak and request stateless, but it's a
+-		     * lot easier to just assume the peer will request
+-		     * it if he can do it; stateful mode is bad over
+-		     * the Internet -- which is where we expect MPPE.
+-		     */
+-		   if (refuse_mppe_stateful) {
+-			error("Refusing MPPE stateful mode offered by peer");
++ 		    p[2] = (wo->mppe_stateless ? MPPE_STATELESS : 0);
++ 		    p[3] = 0;
++ 		    p[4] = 0;
++ 		    p[5] = (wo->mppe_40 ? MPPE_40BIT : 0) |
++ 			(wo->mppe_56 ? MPPE_56BIT : 0) |
++ 			(wo->mppe_128 ? MPPE_128BIT : 0) |
++ 			(wo->mppc ? MPPE_MPPC : 0);
++ 		    break;
++		}
++
++ 		if ((p[5] & MPPE_MPPC)) {
++ 		    if (ao->mppc) {
++ 			ho->mppc = 1;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			opt_buf[2] = opt_buf[3] = opt_buf[4] = 0;
++ 			opt_buf[5] = MPPE_MPPC;
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 1) <= 0) {
++ 			    ho->mppc = 0;
++ 			    p[5] &= ~MPPE_MPPC;
++ 			    newret = CONFNAK;
++ 			}
++ 		    } else {
+ 			newret = CONFREJ;
+-			break;
+-		    }
++ 			if (wo->mppe || ao->mppe) {
++ 			    p[5] &= ~MPPE_MPPC;
++ 			    newret = CONFNAK;
++			}
++ 		    }
++ 		}
++ 
++ 		if (ao->mppe)
++ 		    ho->mppe = 1;
++ 
++ 		if ((p[2] & MPPE_STATELESS)) {
++	    if (ao->mppe_stateless) {
++	 			if (wo->mppe_stateless)
++ 			    ho->mppe_stateless = 1;
++	 			else {
++ 			    newret = CONFNAK;
++			    if (!dont_nak)
++	 				p[2] &= ~MPPE_STATELESS;
++	 			}
++		} else {
++ 			newret = CONFNAK;
++ 			if (!dont_nak)
++ 			    p[2] &= ~MPPE_STATELESS;
++ 	    }
++ 		} else {
++ 		  if (wo->mppe_stateless && !dont_nak) {
++ 				wo->mppe_stateless = 0;
++ 				newret = CONFNAK;
++ 				p[2] |= MPPE_STATELESS;
++ 	    }
+ 		}
+ 
+-		/* Find out which of {S,L} are set. */
+-		if ((ho->mppe & MPPE_OPT_128)
+-		     && (ho->mppe & MPPE_OPT_40)) {
+-		    /* Both are set, negotiate the strongest. */
++		if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT|MPPE_128BIT)) {
+ 		    newret = CONFNAK;
+-		    if (ao->mppe & MPPE_OPT_128)
+-			ho->mppe &= ~MPPE_OPT_40;
+-		    else if (ao->mppe & MPPE_OPT_40)
+-			ho->mppe &= ~MPPE_OPT_128;
+-		    else {
+-			newret = CONFREJ;
+-			break;
++ 		    if (ao->mppe_128) {
++ 			ho->mppe_128 = 1;
++ 			p[5] &= ~(MPPE_40BIT|MPPE_56BIT);
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_128 = 0;
++ 			    p[5] |= (MPPE_40BIT|MPPE_56BIT);
++ 			    p[5] &= ~MPPE_128BIT;
++ 			    goto check_mppe_56_40;
++ 			}
++ 			goto check_mppe;
+ 		    }
+-		} else if (ho->mppe & MPPE_OPT_128) {
+-		    if (!(ao->mppe & MPPE_OPT_128)) {
+-			newret = CONFREJ;
+-			break;
++ 		    p[5] &= ~MPPE_128BIT;
++ 		    goto check_mppe_56_40;
++ 		}
++ 		if ((p[5] & ~MPPE_MPPC) == (MPPE_56BIT|MPPE_128BIT)) {
++ 		    newret = CONFNAK;
++ 		    if (ao->mppe_128) {
++ 			ho->mppe_128 = 1;
++ 			p[5] &= ~MPPE_56BIT;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_128 = 0;
++ 			    p[5] |= MPPE_56BIT;
++ 			    p[5] &= ~MPPE_128BIT;
++ 			    goto check_mppe_56;
++ 			}
++ 			goto check_mppe;
+ 		    }
+-		} else if (ho->mppe & MPPE_OPT_40) {
+-		    if (!(ao->mppe & MPPE_OPT_40)) {
+-			newret = CONFREJ;
+-			break;
++ 		    p[5] &= ~MPPE_128BIT;
++ 		    goto check_mppe_56;
++ 		}
++ 		if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_128BIT)) {
++ 		    newret = CONFNAK;
++ 		    if (ao->mppe_128) {
++ 			ho->mppe_128 = 1;
++ 			p[5] &= ~MPPE_40BIT;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_128 = 0;
++ 			    p[5] |= MPPE_40BIT;
++ 			    p[5] &= ~MPPE_128BIT;
++ 			    goto check_mppe_40;
++ 			}
++ 			goto check_mppe;
++ 		    }
++ 		    p[5] &= ~MPPE_128BIT;
++ 		    goto check_mppe_40;
++ 		}
++ 		if ((p[5] & ~MPPE_MPPC) == MPPE_128BIT) {
++ 		    if (ao->mppe_128) {
++ 			ho->mppe_128 = 1;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_128 = 0;
++ 			    p[5] &= ~MPPE_128BIT;
++ 			    newret = CONFNAK;
++ 			}
++ 			goto check_mppe;
++ 		    }
++ 		    p[5] &= ~MPPE_128BIT;
++ 		    newret = CONFNAK;
++ 		    goto check_mppe;
++ 		}
++ 	    check_mppe_56_40:
++ 		if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT)) {
++ 		    newret = CONFNAK;
++ 		    if (ao->mppe_56) {
++ 			ho->mppe_56 = 1;
++ 			p[5] &= ~MPPE_40BIT;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_56 = 0;
++ 			    p[5] |= MPPE_40BIT;
++ 			    p[5] &= ~MPPE_56BIT;
++ 			    newret = CONFNAK;
++ 			    goto check_mppe_40;
++ 			}
++ 			goto check_mppe;
++ 		    }
++ 		    p[5] &= ~MPPE_56BIT;
++ 		    goto check_mppe_40;
++ 		}
++	    check_mppe_56:
++ 		if ((p[5] & ~MPPE_MPPC) == MPPE_56BIT) {
++ 		    if (ao->mppe_56) {
++ 			ho->mppe_56 = 1;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_56 = 0;
++ 			    p[5] &= ~MPPE_56BIT;
++ 			    newret = CONFNAK;
++ 			}
++ 			goto check_mppe;
++ 		    }
++ 		    p[5] &= ~MPPE_56BIT;
++ 		    newret = CONFNAK;
++ 		    goto check_mppe;
++ 		}
++ 	    check_mppe_40:
++ 		if ((p[5] & ~MPPE_MPPC) == MPPE_40BIT) {
++ 		    if (ao->mppe_40) {
++ 			ho->mppe_40 = 1;
++ 			BCOPY(p, opt_buf, CILEN_MPPE);
++ 			BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
++ 			      MPPE_MAX_KEY_LEN);
++ 			if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
++ 				     MPPE_MAX_KEY_LEN, 1) <= 0) {
++ 			    ho->mppe_40 = 0;
++ 			    p[5] &= ~MPPE_40BIT;
++ 			    newret = CONFNAK;
++ 			}
++ 			goto check_mppe;
++ 		    }
++ 		    p[5] &= ~MPPE_40BIT;
++ 		}
++ 
++ 	    check_mppe:
++ 		if (!ho->mppe_40 && !ho->mppe_56 && !ho->mppe_128) {
++ 		    if (wo->mppe_40 || wo->mppe_56 || wo->mppe_128) {
++ 			newret = CONFNAK;
++ 			p[2] |= (wo->mppe_stateless ? MPPE_STATELESS : 0);
++ 			p[5] |= (wo->mppe_40 ? MPPE_40BIT : 0) |
++ 			    (wo->mppe_56 ? MPPE_56BIT : 0) |
++ 			    (wo->mppe_128 ? MPPE_128BIT : 0) |
++ 			    (wo->mppc ? MPPE_MPPC : 0);
++ 		    } else {
++ 			ho->mppe = ho->mppe_stateless = 0;
+ 		    }
+ 		} else {
+-		    /* Neither are set. */
+-		    /* We cannot accept this.  */
+-		    newret = CONFNAK;
+-		    /* Give the peer our idea of what can be used,
+-		       so it can choose and confirm */
+-		    ho->mppe = ao->mppe;
+-		}
+-
+-		/* rebuild the opts */
+-		MPPE_OPTS_TO_CI(ho->mppe, &p[2]);
+-		if (newret == CONFACK) {
+-		    u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
+-		    int mtu;
+-
+-		    BCOPY(p, opt_buf, CILEN_MPPE);
+-		    BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
+-			  MPPE_MAX_KEY_LEN);
+-		    if (ccp_test(f->unit, opt_buf,
+-				 CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) {
+-			/* This shouldn't happen, we've already tested it! */
+-			error("MPPE required, but kernel has no support.");
+-			lcp_close(f->unit, "MPPE required but not available");
+-			newret = CONFREJ;
+-			break;
+-		    }
+-		    /*
+-		     * We need to decrease the interface MTU by MPPE_PAD
+-		     * because MPPE frames **grow**.  The kernel [must]
+-		     * allocate MPPE_PAD extra bytes in xmit buffers.
+-		     */
+-		    mtu = netif_get_mtu(f->unit);
+-		    if (mtu)
+-			netif_set_mtu(f->unit, mtu - MPPE_PAD);
+-		    else
+-			newret = CONFREJ;
++		    /* MPPE is not compatible with other compression types */
++ 		    if (wo->mppe) {
++ 			ao->bsd_compress = 0;
++ 			ao->predictor_1 = 0;
++ 			ao->predictor_2 = 0;
++ 			ao->deflate = 0;
++ 			ao->lzs = 0;
++ 		    }
++ 		}
++ 		if ((!ho->mppc || !ao->mppc) && !ho->mppe) {
++ 		    p[2] = p2;
++ 		    p[5] = p5;
++		    /* gaute: using code supposed to be here according to mppc patch  */
++		    newret = CONFREJ;
++
++		    break;
+ 		}
+ 
++
++
+ 		/*
+-		 * We have accepted MPPE or are willing to negotiate
+-		 * MPPE parameters.  A CONFREJ is due to subsequent
+-		 * (non-MPPE) processing.
++			lots of comments..
+ 		 */
+-		rej_for_ci_mppe = 0;
++
+ 		break;
+ #endif /* MPPE */
++ 
++ 	    case CI_LZS:
++ 		if (!ao->lzs || clen != CILEN_LZS) {
++ 		    newret = CONFREJ;
++ 		    break;
++ 		}
++ 
++ 		ho->lzs = 1;
++ 		ho->lzs_hists = (p[2] << 8) | p[3];
++ 		ho->lzs_mode = p[4];
++ 		if ((ho->lzs_hists != ao->lzs_hists) ||
++ 		    (ho->lzs_mode != ao->lzs_mode)) {
++ 		    newret = CONFNAK;
++ 		    if (!dont_nak) {
++ 			p[2] = ao->lzs_hists >> 8;
++ 			p[3] = ao->lzs_hists & 0xff;
++ 			p[4] = ao->lzs_mode;
++ 		    } else
++ 			break;
++ 		}
++ 
++ 		if (p == p0 && ccp_test(f->unit, p, CILEN_LZS, 1) <= 0) {
++ 		    newret = CONFREJ;
++ 		}
++ 		break;
++ 
+ 	    case CI_DEFLATE:
+ 	    case CI_DEFLATE_DRAFT:
+ 		if (!ao->deflate || clen != CILEN_DEFLATE
+@@ -1344,12 +1804,6 @@
+ 	else
+ 	    *lenp = retp - p0;
+     }
+-#ifdef MPPE
+-    if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) {
+-	error("MPPE required but peer negotiation failed");
+-	lcp_close(f->unit, "MPPE required but peer negotiation failed");
+-    }
+-#endif
+     return ret;
+ }
+ 
+@@ -1371,24 +1825,35 @@
+ 	char *p = result;
+ 	char *q = result + sizeof(result); /* 1 past result */
+ 
+-	slprintf(p, q - p, "MPPE ");
+-	p += 5;
+-	if (opt->mppe & MPPE_OPT_128) {
+-	    slprintf(p, q - p, "128-bit ");
+-	    p += 8;
+-	}
+-	if (opt->mppe & MPPE_OPT_40) {
+-	    slprintf(p, q - p, "40-bit ");
+-	    p += 7;
+-	}
+-	if (opt->mppe & MPPE_OPT_STATEFUL)
+-	    slprintf(p, q - p, "stateful");
+-	else
+-	    slprintf(p, q - p, "stateless");
+-
++	if (opt->mppe) {
++	    if (opt->mppc) {
++		slprintf(p, q - p, "MPPC/MPPE ");
++		p += 10;
++	    } else {
++		slprintf(p, q - p, "MPPE ");
++		p += 5;
++	    }
++	    if (opt->mppe_128) {
++		slprintf(p, q - p, "128-bit ");
++		p += 8;
++	    } else if (opt->mppe_56) {
++		slprintf(p, q - p, "56-bit ");
++		p += 7;
++	    } else if (opt->mppe_40) {
++		slprintf(p, q - p, "40-bit ");
++		p += 7;
++	    }
++	    if (opt->mppe_stateless)
++		slprintf(p, q - p, "stateless");
++	    else
++		slprintf(p, q - p, "stateful");
++	} else if (opt->mppc)
++	    slprintf(p, q - p, "MPPC");
+ 	break;
+     }
+-#endif
++#endif /* MPPE */
++    case CI_LZS:
++	return "Stac LZS";
+     case CI_DEFLATE:
+     case CI_DEFLATE_DRAFT:
+ 	if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
+@@ -1444,12 +1909,12 @@
+     } else if (ANY_COMPRESS(*ho))
+ 	notice("%s transmit compression enabled", method_name(ho, NULL));
+ #ifdef MPPE
+-    if (go->mppe) {
++    if (go->mppe || go->mppc) {
+ 	BZERO(mppe_recv_key, MPPE_MAX_KEY_LEN);
+ 	BZERO(mppe_send_key, MPPE_MAX_KEY_LEN);
+ 	continue_networks(f->unit);		/* Bring up IP et al */
+     }
+-#endif
++#endif /* MPPE */
+ }
+ 
+ /*
+@@ -1472,7 +1937,7 @@
+ 	    lcp_close(f->unit, "MPPE disabled");
+ 	}
+     }
+-#endif
++#endif /* MPPE */
+ }
+ 
+ /*
+@@ -1532,24 +1997,28 @@
+ #ifdef MPPE
+ 	    case CI_MPPE:
+ 		if (optlen >= CILEN_MPPE) {
+-		    u_char mppe_opts;
+-
+-		    MPPE_CI_TO_OPTS(&p[2], mppe_opts);
+-		    printer(arg, "mppe %s %s %s %s %s %s%s",
+-			    (p[2] & MPPE_H_BIT)? "+H": "-H",
+-			    (p[5] & MPPE_M_BIT)? "+M": "-M",
+-			    (p[5] & MPPE_S_BIT)? "+S": "-S",
+-			    (p[5] & MPPE_L_BIT)? "+L": "-L",
++		    printer(arg, "mppe %s %s %s %s %s %s",
++			    (p[2] & MPPE_STATELESS)? "+H": "-H",
++			    (p[5] & MPPE_56BIT)? "+M": "-M",
++			    (p[5] & MPPE_128BIT)? "+S": "-S",
++			    (p[5] & MPPE_40BIT)? "+L": "-L",
+ 			    (p[5] & MPPE_D_BIT)? "+D": "-D",
+-			    (p[5] & MPPE_C_BIT)? "+C": "-C",
+-			    (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": "");
+-		    if (mppe_opts & MPPE_OPT_UNKNOWN)
++			    (p[5] & MPPE_MPPC)? "+C": "-C");
++		    if ((p[5] & ~(MPPE_56BIT | MPPE_128BIT | MPPE_40BIT |
++				  MPPE_D_BIT | MPPE_MPPC)) ||
++			(p[2] & ~MPPE_STATELESS))
+ 			printer(arg, " (%.2x %.2x %.2x %.2x)",
+ 				p[2], p[3], p[4], p[5]);
+ 		    p += CILEN_MPPE;
+ 		}
+ 		break;
+-#endif
++#endif /* MPPE */
++	    case CI_LZS:
++		if (optlen >= CILEN_LZS) {
++		    printer(arg, "lzs %.2x %.2x %.2x", p[2], p[3], p[4]);
++		    p += CILEN_LZS;
++		}
++		break;
+ 	    case CI_DEFLATE:
+ 	    case CI_DEFLATE_DRAFT:
+ 		if (optlen >= CILEN_DEFLATE) {
+@@ -1635,6 +2104,7 @@
+ 	    error("Lost compression sync: disabling compression");
+ 	    ccp_close(unit, "Lost compression sync");
+ #ifdef MPPE
++	    /* My module dosn't need this. J.D., 2003-07-06 */
+ 	    /*
+ 	     * If we were doing MPPE, we must also take the link down.
+ 	     */
+@@ -1642,9 +2112,18 @@
+ 		error("Too many MPPE errors, closing LCP");
+ 		lcp_close(unit, "Too many MPPE errors");
+ 	    }
+-#endif
++#endif /* MPPE */
+ 	} else {
+ 	    /*
++	     * When LZS or MPPE/MPPC is negotiated we just send CCP_RESETREQ
++	     * and don't wait for CCP_RESETACK
++	     */
++	    if ((ccp_gotoptions[f->unit].method == CI_LZS) ||
++		(ccp_gotoptions[f->unit].method == CI_MPPE)) {
++		fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
++		return;
++	    }
++	    /*
+ 	     * Send a reset-request to reset the peer's compressor.
+ 	     * We don't do that if we are still waiting for an
+ 	     * acknowledgement to a previous reset-request.
+@@ -1675,4 +2154,3 @@
+     } else
+ 	ccp_localstate[f->unit] &= ~RACK_PENDING;
+ }
+-
+diff -urN ppp-2.4.4-old/pppd/ccp.h ppp-2.4.4-new/pppd/ccp.h
+--- ppp-2.4.4-old/pppd/ccp.h	2004-11-04 11:02:26.000000000 +0100
++++ ppp-2.4.4-new/pppd/ccp.h	2008-03-19 20:11:28.000000000 +0100
+@@ -37,9 +37,17 @@
+     bool predictor_2;		/* do Predictor-2? */
+     bool deflate_correct;	/* use correct code for deflate? */
+     bool deflate_draft;		/* use draft RFC code for deflate? */
++    bool lzs;			/* do Stac LZS? */
++    bool mppc;			/* do MPPC? */
+     bool mppe;			/* do MPPE? */
++    bool mppe_40;		/* allow 40 bit encryption? */
++    bool mppe_56;		/* allow 56 bit encryption? */
++    bool mppe_128;		/* allow 128 bit encryption? */
++    bool mppe_stateless;	/* allow stateless encryption */
+     u_short bsd_bits;		/* # bits/code for BSD Compress */
+     u_short deflate_size;	/* lg(window size) for Deflate */
++    u_short lzs_mode;		/* LZS check mode */
++    u_short lzs_hists;		/* number of LZS histories */
+     short method;		/* code for chosen compression method */
+ } ccp_options;
+ 
+diff -urN ppp-2.4.4-old/pppd/chap_ms.c ppp-2.4.4-new/pppd/chap_ms.c
+--- ppp-2.4.4-old/pppd/chap_ms.c	2006-05-21 13:56:40.000000000 +0200
++++ ppp-2.4.4-new/pppd/chap_ms.c	2008-03-19 20:11:28.000000000 +0100
+@@ -897,13 +897,17 @@
+     /*
+      * Disable undesirable encryption types.  Note that we don't ENABLE
+      * any encryption types, to avoid overriding manual configuration.
++     *
++     * It seems that 56 bit keys are unsupported in MS-RADIUS (see RFC 2548)
+      */
+     switch(types) {
+ 	case MPPE_ENC_TYPES_RC4_40:
+-	    ccp_wantoptions[0].mppe &= ~MPPE_OPT_128;	/* disable 128-bit */
++	    ccp_wantoptions[0].mppe_128 = 0;	/* disable 128-bit */
++	    ccp_wantoptions[0].mppe_56 = 0;	/* disable 56-bit */
+ 	    break;
+ 	case MPPE_ENC_TYPES_RC4_128:
+-	    ccp_wantoptions[0].mppe &= ~MPPE_OPT_40;	/* disable 40-bit */
++	    ccp_wantoptions[0].mppe_56 = 0;	/* disable 56-bit */
++	    ccp_wantoptions[0].mppe_40 = 0;	/* disable 40-bit */
+ 	    break;
+ 	default:
+ 	    break;
+diff -urN ppp-2.4.4-old/pppd/pppd.8 ppp-2.4.4-new/pppd/pppd.8
+--- ppp-2.4.4-old/pppd/pppd.8	2006-06-16 02:01:23.000000000 +0200
++++ ppp-2.4.4-new/pppd/pppd.8	2008-03-19 20:11:28.000000000 +0100
+@@ -627,9 +627,29 @@
+ Enables the use of PPP multilink; this is an alias for the `multilink'
+ option.  This option is currently only available under Linux.
+ .TP
+-.B mppe\-stateful
+-Allow MPPE to use stateful mode.  Stateless mode is still attempted first.
+-The default is to disallow stateful mode.  
++.B mppc
++Enables MPPC (Microsoft Point to Point Compression).  This is the default.
++.TP
++.B mppe \fIsubopt1[,subopt2[,subopt3[..]]]
++Modify MPPE (Microsoft Point to Point Encryption) parameters. In order
++for MPPE to successfully come up, you must have authenticated with either
++MS-CHAP or MS-CHAPv2. By default MPPE is optional, it means that pppd will
++not propose MPPE to the peer, but will negotiate MPPE if peer wants that.
++You can change this using \fIrequired\fR suboption.
++This option is presently only supported under Linux, and only if your
++kernel has been configured to include MPPE support.
++.IP
++MPPE suboptions:
++.br
++\fIrequired\fR - require MPPE; disconnect if peer doesn't support it,
++.br
++\fIstateless\fR - try to negotiate stateless mode; default is stateful,
++.br
++\fIno40\fR - disable 40 bit keys,
++.br
++\fIno56\fR - disable 56 bit keys,
++.br
++\fIno128\fR - disable 128 bit keys
+ .TP
+ .B mpshortseq
+ Enables the use of short (12-bit) sequence numbers in multilink
+@@ -767,17 +787,11 @@
+ Disables the use of PPP multilink.  This option is currently only
+ available under Linux.
+ .TP
+-.B nomppe
+-Disables MPPE (Microsoft Point to Point Encryption).  This is the default.
+-.TP
+-.B nomppe\-40
+-Disable 40-bit encryption with MPPE.
++.B nomppc
++Disables MPPC (Microsoft Point to Point Compression).
+ .TP
+-.B nomppe\-128
+-Disable 128-bit encryption with MPPE.
+-.TP
+-.B nomppe\-stateful
+-Disable MPPE stateful mode.  This is the default.
++.B nomppe
++Disables MPPE (Microsoft Point to Point Encryption).
+ .TP
+ .B nompshortseq
+ Disables the use of short (12-bit) sequence numbers in the PPP
+@@ -958,19 +972,6 @@
+ Require the peer to authenticate itself using CHAP [Challenge
+ Handshake Authentication Protocol] authentication.
+ .TP
+-.B require\-mppe
+-Require the use of MPPE (Microsoft Point to Point Encryption).  This
+-option disables all other compression types.  This option enables
+-both 40-bit and 128-bit encryption.  In order for MPPE to successfully
+-come up, you must have authenticated with either MS\-CHAP or MS\-CHAPv2.
+-This option is presently only supported under Linux, and only if your
+-kernel has been configured to include MPPE support.
+-.TP
+-.B require\-mppe\-40
+-Require the use of MPPE, with 40-bit encryption.
+-.TP
+-.B require\-mppe\-128
+-Require the use of MPPE, with 128-bit encryption.
+ .TP
+ .B require\-mschap
+ Require the peer to authenticate itself using MS\-CHAP [Microsoft Challenge
diff --git a/recipes/ppp/ppp-2.4.5/pppd-resolv-varrun.patch b/recipes/ppp/ppp-2.4.5/pppd-resolv-varrun.patch
new file mode 100644
index 0000000000..c22d8cc085
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/pppd-resolv-varrun.patch
@@ -0,0 +1,43 @@
+
+#
+# Patch managed by http://www.holgerschurig.de/patcher.html
+#
+
+--- ppp-2.4.3/pppd/ipcp.c~pppd-resolv-varrun.patch
++++ ppp-2.4.3/pppd/ipcp.c
+@@ -55,6 +55,8 @@
+ #include <sys/socket.h>
+ #include <netinet/in.h>
+ #include <arpa/inet.h>
++#include <sys/stat.h>
++#include <unistd.h>
+ 
+ #include "pppd.h"
+ #include "fsm.h"
+@@ -2032,6 +2034,14 @@
+     u_int32_t peerdns1, peerdns2;
+ {
+     FILE *f;
++    struct stat dirinfo;
++
++    if(stat(_PATH_OUTDIR, &dirinfo)) {
++        if(mkdir(_PATH_OUTDIR, 0775)) {
++            error("Failed to create directory %s: %m", _PATH_OUTDIR);
++            return;
++        }
++    }
+ 
+     f = fopen(_PATH_RESOLV, "w");
+     if (f == NULL) {
+--- ppp-2.4.3/pppd/pathnames.h~pppd-resolv-varrun.patch
++++ ppp-2.4.3/pppd/pathnames.h
+@@ -29,7 +29,8 @@
+ #define _PATH_TTYOPT	 _ROOT_PATH "/etc/ppp/options."
+ #define _PATH_CONNERRS	 _ROOT_PATH "/etc/ppp/connect-errors"
+ #define _PATH_PEERFILES	 _ROOT_PATH "/etc/ppp/peers/"
+-#define _PATH_RESOLV	 _ROOT_PATH "/etc/ppp/resolv.conf"
++#define _PATH_OUTDIR	_ROOT_PATH _PATH_VARRUN "/ppp"
++#define _PATH_RESOLV	_PATH_OUTDIR "/resolv.conf"
+ 
+ #define _PATH_USEROPT	 ".ppprc"
+ #define	_PATH_PSEUDONYM	 ".ppp_pseudonym"
diff --git a/recipes/ppp/ppp-2.4.5/pppoatm-makefile.patch b/recipes/ppp/ppp-2.4.5/pppoatm-makefile.patch
new file mode 100644
index 0000000000..5601f593d0
--- /dev/null
+++ b/recipes/ppp/ppp-2.4.5/pppoatm-makefile.patch
@@ -0,0 +1,7 @@
+--- ppp-2.4.3/pppd/plugins/pppoatm/Makefile.linux.orig	2005-10-26 20:38:50.990298750 +0100
++++ ppp-2.4.3/pppd/plugins/pppoatm/Makefile.linux	2005-10-26 20:39:05.583210750 +0100
+@@ -1,4 +1,3 @@
+-CC	= gcc
+ COPTS	= -O2 -g
+ CFLAGS	= $(COPTS) -I../.. -I../../../include -fPIC
+ LDFLAGS	= -shared
diff --git a/recipes/ppp/ppp_2.4.5.bb b/recipes/ppp/ppp_2.4.5.bb
new file mode 100644
index 0000000000..2b6b6f7a7a
--- /dev/null
+++ b/recipes/ppp/ppp_2.4.5.bb
@@ -0,0 +1,82 @@
+SECTION = "console/network"
+DESCRIPTION = "Point-to-Point Protocol (PPP) daemon"
+HOMEPAGE = "http://samba.org/ppp/"
+DEPENDS = "libpcap"
+LICENSE = "BSD GPLv2"
+PR = "r1"
+# Not well tested
+DEFAULT_PREFERENCE = "-1"
+
+PARALLEL_MAKE = ""
+
+SRC_URI = "http://ppp.samba.org/ftp/ppp/ppp-${PV}.tar.gz \
+        file://ppp-2.4.4-mppe-mppc.1.1.patch \
+        file://makefile.patch \
+        file://cifdefroute.patch \
+        file://pppd-resolv-varrun.patch \
+        file://enable-ipv6.patch \
+        file://makefile-remove-hard-usr-reference.patch \
+        file://ldflags.patch \
+	file://pon \
+	file://poff \
+	file://init \
+	file://ip-up \
+	file://ip-down \
+	file://08setupdns \
+	file://92removedns"
+
+inherit autotools
+
+TARGET_CC_ARCH += " ${LDFLAGS}" 
+EXTRA_OEMAKE = "STRIPPROG=${STRIP} MANDIR=${D}${datadir}/man/man8 INCDIR=${D}${includedir} LIBDIR=${D}${libdir}/pppd/${PV} BINDIR=${D}${sbindir}"
+EXTRA_OECONF = "--disable-strip"
+
+do_install_append () {
+	make INCDIR=${D}/${includedir} install-devel
+	make install-etcppp ETCDIR=${D}/${sysconfdir}/ppp
+	mkdir -p ${D}${bindir}/ ${D}${sysconfdir}/init.d
+	mkdir -p ${D}${sysconfdir}/ppp/ip-up.d/
+	mkdir -p ${D}${sysconfdir}/ppp/ip-down.d/
+	mkdir -p ${D}${sysconfdir}/ppp/peers/
+ 	install -m 0755 ${WORKDIR}/pon ${D}${bindir}/pon
+	install -m 0755 ${WORKDIR}/poff ${D}${bindir}/poff
+	install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/ppp
+	install -m 0755 ${WORKDIR}/ip-up ${D}${sysconfdir}/ppp/
+	install -m 0755 ${WORKDIR}/ip-down ${D}${sysconfdir}/ppp/
+	install -m 0755 ${WORKDIR}/08setupdns ${D}${sysconfdir}/ppp/ip-up.d/
+	install -m 0755 ${WORKDIR}/92removedns ${D}${sysconfdir}/ppp/ip-down.d/
+	rm -rf ${D}/${mandir}/man8/man8
+}
+
+CONFFILES_${PN} = "${sysconfdir}/ppp/pap-secrets ${sysconfdir}/ppp/chap-secrets ${sysconfdir}/ppp/options"
+PACKAGES =+ "ppp-oa ppp-oe ppp-radius ppp-winbind ppp-minconn ppp-password ppp-tools"
+FILES_${PN}        = "${sysconfdir} ${bindir} ${sbindir}/chat ${sbindir}/pppd"
+FILES_${PN}_nylon  = "${sysconfdir} ${bindir} ${sbindir}/chat ${sbindir}/pppd ${sbindir}/tdbread"
+FILES_${PN}-dbg += "${libdir}/pppd/${PV}/.debug"
+FILES_${PN}-oa       = "${libdir}/pppd/${PV}/pppoatm.so"
+FILES_${PN}-oe       = "${sbindir}/pppoe-discovery ${libdir}/pppd/${PV}/rp-pppoe.so"
+FILES_${PN}-radius   = "${libdir}/pppd/${PV}/radius.so ${libdir}/pppd/${PV}/radattr.so ${libdir}/pppd/${PV}/radrealms.so"
+FILES_${PN}-winbind  = "${libdir}/pppd/${PV}/winbind.so"
+FILES_${PN}-minconn  = "${libdir}/pppd/${PV}/minconn.so"
+FILES_${PN}-password = "${libdir}/pppd/${PV}/pass*.so"
+FILES_${PN}-tools    = "${sbindir}/pppstats ${sbindir}/pppdump"
+DESCRIPTION_ppp-oa       = "Plugin for PPP needed for PPP-over-ATM"
+DESCRIPTION_ppp-oe       = "Plugin for PPP needed for PPP-over-Ethernet"
+DESCRIPTION_ppp-radius   = "Plugin for PPP that are related to RADIUS"
+DESCRIPTION_ppp-winbind  = "Plugin for PPP to authenticate against Samba or Windows"
+DESCRIPTION_ppp-minconn  = "Plugin for PPP to specify a minimum connect time before the idle timeout applies"
+DESCRIPTION_ppp-password = "Plugin for PPP to get passwords via a pipe"
+DESCRIPTION_ppp-tools    = "The pppdump and pppstats utitilities"
+RDEPENDS_ppp_minconn    += "libpcap0.8"
+
+pkg_postinst_${PN}() {
+if test "x$D" != "x"; then
+	exit 1
+else
+	chmod u+s ${sbindir}/pppd
+fi
+}
+
+SRC_URI[md5sum] = "4621bc56167b6953ec4071043fe0ec57"
+SRC_URI[sha256sum] = "43317afec9299f9920b96f840414c977f0385410202d48e56d2fdb8230003505"
+