aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--recipes/linux/linux-2.6.27/boc01/010-090112-mii.patch503
-rw-r--r--recipes/linux/linux-2.6.27/boc01/boc01.dts19
-rw-r--r--recipes/linux/linux_2.6.27.bb3
3 files changed, 3 insertions, 522 deletions
diff --git a/recipes/linux/linux-2.6.27/boc01/010-090112-mii.patch b/recipes/linux/linux-2.6.27/boc01/010-090112-mii.patch
deleted file mode 100644
index 33c6cb7498..0000000000
--- a/recipes/linux/linux-2.6.27/boc01/010-090112-mii.patch
+++ /dev/null
@@ -1,503 +0,0 @@
-Index: linux-2.6.27/drivers/net/gianfar_ethtool.c
-===================================================================
---- linux-2.6.27.orig/drivers/net/gianfar_ethtool.c
-+++ linux-2.6.27/drivers/net/gianfar_ethtool.c
-@@ -182,13 +182,7 @@ static void gfar_gdrvinfo(struct net_dev
-
- static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
-- struct gfar_private *priv = netdev_priv(dev);
-- struct phy_device *phydev = priv->phydev;
--
-- if (NULL == phydev)
-- return -ENODEV;
--
-- return phy_ethtool_sset(phydev, cmd);
-+ return 0;
- }
-
-
-@@ -196,15 +190,11 @@ static int gfar_ssettings(struct net_dev
- static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct gfar_private *priv = netdev_priv(dev);
-- struct phy_device *phydev = priv->phydev;
--
-- if (NULL == phydev)
-- return -ENODEV;
-
- cmd->maxtxpkt = priv->txcount;
- cmd->maxrxpkt = priv->rxcount;
-
-- return phy_ethtool_gset(phydev, cmd);
-+ return 0;
- }
-
- /* Return the length of the register structure */
-@@ -232,18 +222,7 @@ static unsigned int gfar_usecs2ticks(str
- unsigned int count;
-
- /* The timer is different, depending on the interface speed */
-- switch (priv->phydev->speed) {
-- case SPEED_1000:
-- count = GFAR_GBIT_TIME;
-- break;
-- case SPEED_100:
-- count = GFAR_100_TIME;
-- break;
-- case SPEED_10:
-- default:
-- count = GFAR_10_TIME;
-- break;
-- }
-+ count = GFAR_100_TIME;
-
- /* Make sure we return a number greater than 0
- * if usecs > 0 */
-@@ -256,18 +235,7 @@ static unsigned int gfar_ticks2usecs(str
- unsigned int count;
-
- /* The timer is different, depending on the interface speed */
-- switch (priv->phydev->speed) {
-- case SPEED_1000:
-- count = GFAR_GBIT_TIME;
-- break;
-- case SPEED_100:
-- count = GFAR_100_TIME;
-- break;
-- case SPEED_10:
-- default:
-- count = GFAR_10_TIME;
-- break;
-- }
-+ count = GFAR_100_TIME;
-
- /* Make sure we return a number greater than 0 */
- /* if ticks is > 0 */
-@@ -283,9 +251,6 @@ static int gfar_gcoalesce(struct net_dev
- if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
- return -EOPNOTSUPP;
-
-- if (NULL == priv->phydev)
-- return -ENODEV;
--
- cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
- cvals->rx_max_coalesced_frames = priv->rxcount;
-
-@@ -342,9 +307,6 @@ static int gfar_scoalesce(struct net_dev
- else
- priv->rxcoalescing = 1;
-
-- if (NULL == priv->phydev)
-- return -ENODEV;
--
- /* Check the bounds of the values */
- if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
- pr_info("Coalescing is limited to %d microseconds\n",
-Index: linux-2.6.27/drivers/net/gianfar.c
-===================================================================
---- linux-2.6.27.orig/drivers/net/gianfar.c
-+++ linux-2.6.27/drivers/net/gianfar.c
-@@ -116,7 +116,6 @@ static int gfar_change_mtu(struct net_de
- static irqreturn_t gfar_error(int irq, void *dev_id);
- static irqreturn_t gfar_transmit(int irq, void *dev_id);
- static irqreturn_t gfar_interrupt(int irq, void *dev_id);
--static void adjust_link(struct net_device *dev);
- static void init_registers(struct net_device *dev);
- static int init_phy(struct net_device *dev);
- static int gfar_probe(struct platform_device *pdev);
-@@ -124,7 +123,6 @@ static int gfar_remove(struct platform_d
- static void free_skb_resources(struct gfar_private *priv);
- static void gfar_set_multi(struct net_device *dev);
- static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
--static void gfar_configure_serdes(struct net_device *dev);
- static int gfar_poll(struct napi_struct *napi, int budget);
- #ifdef CONFIG_NET_POLL_CONTROLLER
- static void gfar_netpoll(struct net_device *dev);
-@@ -424,8 +422,6 @@ static int gfar_suspend(struct platform_
- tempval = gfar_read(&priv->regs->maccfg2);
- tempval |= MACCFG2_MPEN;
- gfar_write(&priv->regs->maccfg2, tempval);
-- } else {
-- phy_stop(priv->phydev);
- }
- }
-
-@@ -438,17 +434,12 @@ static int gfar_resume(struct platform_d
- struct gfar_private *priv = netdev_priv(dev);
- unsigned long flags;
- u32 tempval;
-- int magic_packet = priv->wol_en &&
-- (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
-
- if (!netif_running(dev)) {
- netif_device_attach(dev);
- return 0;
- }
-
-- if (!magic_packet && priv->phydev)
-- phy_start(priv->phydev);
--
- /* Disable Magic Packet mode, in case something
- * else woke us up.
- */
-@@ -476,47 +467,6 @@ static int gfar_resume(struct platform_d
- #define gfar_resume NULL
- #endif
-
--/* Reads the controller's registers to determine what interface
-- * connects it to the PHY.
-- */
--static phy_interface_t gfar_get_interface(struct net_device *dev)
--{
-- struct gfar_private *priv = netdev_priv(dev);
-- u32 ecntrl = gfar_read(&priv->regs->ecntrl);
--
-- if (ecntrl & ECNTRL_SGMII_MODE)
-- return PHY_INTERFACE_MODE_SGMII;
--
-- if (ecntrl & ECNTRL_TBI_MODE) {
-- if (ecntrl & ECNTRL_REDUCED_MODE)
-- return PHY_INTERFACE_MODE_RTBI;
-- else
-- return PHY_INTERFACE_MODE_TBI;
-- }
--
-- if (ecntrl & ECNTRL_REDUCED_MODE) {
-- if (ecntrl & ECNTRL_REDUCED_MII_MODE)
-- return PHY_INTERFACE_MODE_RMII;
-- else {
-- phy_interface_t interface = priv->einfo->interface;
--
-- /*
-- * This isn't autodetected right now, so it must
-- * be set by the device tree or platform code.
-- */
-- if (interface == PHY_INTERFACE_MODE_RGMII_ID)
-- return PHY_INTERFACE_MODE_RGMII_ID;
--
-- return PHY_INTERFACE_MODE_RGMII;
-- }
-- }
--
-- if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
-- return PHY_INTERFACE_MODE_GMII;
--
-- return PHY_INTERFACE_MODE_MII;
--}
--
-
- /* Initializes driver's PHY state, and attaches to the PHY.
- * Returns 0 on success.
-@@ -524,10 +474,6 @@ static phy_interface_t gfar_get_interfac
- static int init_phy(struct net_device *dev)
- {
- struct gfar_private *priv = netdev_priv(dev);
-- uint gigabit_support =
-- priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
-- SUPPORTED_1000baseT_Full : 0;
-- struct phy_device *phydev;
- char phy_id[BUS_ID_SIZE];
- phy_interface_t interface;
-
-@@ -537,54 +483,11 @@ static int init_phy(struct net_device *d
-
- snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
-
-- interface = gfar_get_interface(dev);
--
-- phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
--
-- if (interface == PHY_INTERFACE_MODE_SGMII)
-- gfar_configure_serdes(dev);
--
-- if (IS_ERR(phydev)) {
-- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-- return PTR_ERR(phydev);
-- }
--
-- /* Remove any features not supported by the controller */
-- phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
-- phydev->advertising = phydev->supported;
--
-- priv->phydev = phydev;
-+ interface = PHY_INTERFACE_MODE_MII;
-
- return 0;
- }
-
--/*
-- * Initialize TBI PHY interface for communicating with the
-- * SERDES lynx PHY on the chip. We communicate with this PHY
-- * through the MDIO bus on each controller, treating it as a
-- * "normal" PHY at the address found in the TBIPA register. We assume
-- * that the TBIPA register is valid. Either the MDIO bus code will set
-- * it to a value that doesn't conflict with other PHYs on the bus, or the
-- * value doesn't matter, as there are no other PHYs on the bus.
-- */
--static void gfar_configure_serdes(struct net_device *dev)
--{
-- struct gfar_private *priv = netdev_priv(dev);
-- struct gfar_mii __iomem *regs =
-- (void __iomem *)&priv->regs->gfar_mii_regs;
-- int tbipa = gfar_read(&priv->regs->tbipa);
--
-- /* Single clk mode, mii mode off(for serdes communication) */
-- gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT);
--
-- gfar_local_mdio_write(regs, tbipa, MII_ADVERTISE,
-- ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
-- ADVERTISE_1000XPSE_ASYM);
--
-- gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE |
-- BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
--}
--
- static void init_registers(struct net_device *dev)
- {
- struct gfar_private *priv = netdev_priv(dev);
-@@ -678,8 +581,6 @@ void stop_gfar(struct net_device *dev)
- struct gfar __iomem *regs = priv->regs;
- unsigned long flags;
-
-- phy_stop(priv->phydev);
--
- /* Lock it down */
- spin_lock_irqsave(&priv->txlock, flags);
- spin_lock(&priv->rxlock);
-@@ -949,7 +850,6 @@ int startup_gfar(struct net_device *dev)
- }
- }
-
-- phy_start(priv->phydev);
-
- /* Configure the coalescing support */
- if (priv->txcoalescing)
-@@ -1217,9 +1117,6 @@ static int gfar_close(struct net_device
- cancel_work_sync(&priv->reset_task);
- stop_gfar(dev);
-
-- /* Disconnect from the PHY */
-- phy_disconnect(priv->phydev);
-- priv->phydev = NULL;
-
- netif_stop_queue(dev);
-
-@@ -1777,86 +1674,6 @@ static irqreturn_t gfar_interrupt(int ir
- return IRQ_HANDLED;
- }
-
--/* Called every time the controller might need to be made
-- * aware of new link state. The PHY code conveys this
-- * information through variables in the phydev structure, and this
-- * function converts those variables into the appropriate
-- * register values, and can bring down the device if needed.
-- */
--static void adjust_link(struct net_device *dev)
--{
-- struct gfar_private *priv = netdev_priv(dev);
-- struct gfar __iomem *regs = priv->regs;
-- unsigned long flags;
-- struct phy_device *phydev = priv->phydev;
-- int new_state = 0;
--
-- spin_lock_irqsave(&priv->txlock, flags);
-- if (phydev->link) {
-- u32 tempval = gfar_read(&regs->maccfg2);
-- u32 ecntrl = gfar_read(&regs->ecntrl);
--
-- /* Now we make sure that we can be in full duplex mode.
-- * If not, we operate in half-duplex mode. */
-- if (phydev->duplex != priv->oldduplex) {
-- new_state = 1;
-- if (!(phydev->duplex))
-- tempval &= ~(MACCFG2_FULL_DUPLEX);
-- else
-- tempval |= MACCFG2_FULL_DUPLEX;
--
-- priv->oldduplex = phydev->duplex;
-- }
--
-- if (phydev->speed != priv->oldspeed) {
-- new_state = 1;
-- switch (phydev->speed) {
-- case 1000:
-- tempval =
-- ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
-- break;
-- case 100:
-- case 10:
-- tempval =
-- ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
--
-- /* Reduced mode distinguishes
-- * between 10 and 100 */
-- if (phydev->speed == SPEED_100)
-- ecntrl |= ECNTRL_R100;
-- else
-- ecntrl &= ~(ECNTRL_R100);
-- break;
-- default:
-- if (netif_msg_link(priv))
-- printk(KERN_WARNING
-- "%s: Ack! Speed (%d) is not 10/100/1000!\n",
-- dev->name, phydev->speed);
-- break;
-- }
--
-- priv->oldspeed = phydev->speed;
-- }
--
-- gfar_write(&regs->maccfg2, tempval);
-- gfar_write(&regs->ecntrl, ecntrl);
--
-- if (!priv->oldlink) {
-- new_state = 1;
-- priv->oldlink = 1;
-- }
-- } else if (priv->oldlink) {
-- new_state = 1;
-- priv->oldlink = 0;
-- priv->oldspeed = 0;
-- priv->oldduplex = -1;
-- }
--
-- if (new_state && netif_msg_link(priv))
-- phy_print_status(phydev);
--
-- spin_unlock_irqrestore(&priv->txlock, flags);
--}
-
- /* Update the hash table based on the current list of multicast
- * addresses we subscribe to. Also, change the promiscuity of
-Index: linux-2.6.27/drivers/net/gianfar.h
-===================================================================
---- linux-2.6.27.orig/drivers/net/gianfar.h
-+++ linux-2.6.27/drivers/net/gianfar.h
-@@ -150,7 +150,7 @@ extern const char gfar_driver_version[];
- #define MACCFG1_SYNCD_TX_EN 0x00000002
- #define MACCFG1_TX_EN 0x00000001
-
--#define MACCFG2_INIT_SETTINGS 0x00007205
-+#define MACCFG2_INIT_SETTINGS 0x00007105
- #define MACCFG2_FULL_DUPLEX 0x00000001
- #define MACCFG2_IF 0x00000300
- #define MACCFG2_MII 0x00000100
-@@ -748,7 +748,6 @@ struct gfar_private {
- struct gianfar_platform_data *einfo;
-
- /* PHY stuff */
-- struct phy_device *phydev;
- struct mii_bus *mii_bus;
- int oldspeed;
- int oldduplex;
-Index: linux-2.6.27/drivers/net/gianfar_mii.c
-===================================================================
---- linux-2.6.27.orig/drivers/net/gianfar_mii.c
-+++ linux-2.6.27/drivers/net/gianfar_mii.c
-@@ -217,28 +217,10 @@ static int gfar_mdio_probe(struct device
- if (r)
- return r;
-
-- if (phy_id == 0xffffffff)
-- break;
-- }
--
-- /* The bus is full. We don't support using 31 PHYs, sorry */
-- if (i == 0)
-- return -EBUSY;
--
-- gfar_write(&enet_regs->tbipa, i);
--
-- err = mdiobus_register(new_bus);
--
-- if (0 != err) {
-- printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
-- new_bus->name);
-- goto bus_register_fail;
- }
-
- return 0;
-
--bus_register_fail:
-- iounmap(regs);
- reg_map_fail:
- kfree(new_bus);
-
-Index: linux-2.6.27/drivers/net/gianfar_mii.h
-===================================================================
---- linux-2.6.27.orig/drivers/net/gianfar_mii.h
-+++ linux-2.6.27/drivers/net/gianfar_mii.h
-@@ -27,7 +27,6 @@
- | SUPPORTED_10baseT_Full \
- | SUPPORTED_100baseT_Half \
- | SUPPORTED_100baseT_Full \
-- | SUPPORTED_Autoneg \
- | SUPPORTED_MII)
-
- struct gfar_mii {
-Index: linux-2.6.27/drivers/net/phy/phy_device.c
-===================================================================
---- linux-2.6.27.orig/drivers/net/phy/phy_device.c
-+++ linux-2.6.27/drivers/net/phy/phy_device.c
-@@ -281,7 +281,7 @@ struct phy_device * phy_connect(struct n
- if (IS_ERR(phydev))
- return phydev;
-
-- phy_prepare_link(phydev, handler);
-+ phydev->link = 1;
-
- phy_start_machine(phydev, NULL);
-
-@@ -302,7 +302,7 @@ void phy_disconnect(struct phy_device *p
- phy_stop_interrupts(phydev);
-
- phy_stop_machine(phydev);
--
-+
- phydev->adjust_link = NULL;
-
- phy_detach(phydev);
-@@ -438,7 +438,7 @@ int genphy_config_advert(struct phy_devi
- if (adv < 0)
- return adv;
-
-- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
-+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
- ADVERTISE_PAUSE_ASYM);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
-@@ -503,7 +503,7 @@ int genphy_setup_forced(struct phy_devic
-
- if (DUPLEX_FULL == phydev->duplex)
- ctl |= BMCR_FULLDPLX;
--
-+
- err = phy_write(phydev, MII_BMCR, ctl);
-
- if (err < 0)
-@@ -671,7 +671,7 @@ int genphy_read_status(struct phy_device
- phydev->duplex = DUPLEX_FULL;
- } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
- phydev->speed = SPEED_100;
--
-+
- if (lpa & LPA_100FULL)
- phydev->duplex = DUPLEX_FULL;
- } else
-Index: linux-2.6.27/include/linux/phy.h
-===================================================================
---- linux-2.6.27.orig/include/linux/phy.h
-+++ linux-2.6.27/include/linux/phy.h
-@@ -339,6 +339,11 @@ struct phy_driver {
- u32 features;
- u32 flags;
-
-+ /* Called during discovery to test if the
-+ * device can attach to the bus, even if
-+ phy id and mask do not match */
-+ bool (*detect)(struct mii_bus *bus, int addr);
-+
- /*
- * Called to initialize the PHY,
- * including after a reset
diff --git a/recipes/linux/linux-2.6.27/boc01/boc01.dts b/recipes/linux/linux-2.6.27/boc01/boc01.dts
index ffc27abb31..710ef8fec0 100644
--- a/recipes/linux/linux-2.6.27/boc01/boc01.dts
+++ b/recipes/linux/linux-2.6.27/boc01/boc01.dts
@@ -2,7 +2,7 @@
* Bolloré telecom CPE v01 Device Tree Source
*
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
- * Copyright 2008 Bolloré telecom.
+ * Copyright 2008, 2009 Bolloré telecom.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -171,7 +171,6 @@
mode = "cpu";
};
-
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
@@ -184,20 +183,6 @@
sleep = <&pmc 0x00300000>;
};
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x24520 0x20>;
- phy4: ethernet-phy@4 {
- interrupt-parent = <&ipic>;
- interrupts = <20 0x8>;
- reg = <0x4>;
- device_type = "ethernet-phy";
- };
- };
-
-
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
@@ -207,7 +192,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>;
- phy-handle = < &phy4 >;
+ fixed-link = <1 1 100 0 0>;
sleep = <&pmc 0x10000000>;
fsl,magic-packet;
};
diff --git a/recipes/linux/linux_2.6.27.bb b/recipes/linux/linux_2.6.27.bb
index 5d2d485b12..0b873a65a7 100644
--- a/recipes/linux/linux_2.6.27.bb
+++ b/recipes/linux/linux_2.6.27.bb
@@ -1,6 +1,6 @@
require linux.inc
-PR = "r7"
+PR = "r8"
# Mark archs/machines that this kernel supports
DEFAULT_PREFERENCE = "-1"
@@ -18,7 +18,6 @@ SRC_URI_append_boc01 = "\
file://005-090226-isl12024.patch;patch=1 \
file://007-081217-lm73.patch;patch=1 \
file://008-081208-spi.patch;patch=1 \
- file://010-090112-mii.patch;patch=1 \
file://011-090115-gpio.patch;patch=1 \
file://012-090219-capsense.patch;patch=1 \
file://013-090306-lcd.patch;patch=1 \
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-17 05:09:14 +0000