diff options
3 files changed, 1458 insertions, 0 deletions
diff --git a/recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch b/recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch new file mode 100644 index 0000000000..1b13a590ff --- /dev/null +++ b/recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch @@ -0,0 +1,1357 @@ +From 9d253ab04ceaea4aeebf397e3397c2088f08bd87 Mon Sep 17 00:00:00 2001 +From: slapin <slapin@builder.iar.darktech.org> +Date: Sun, 10 May 2009 02:16:44 +0400 +Subject: [PATCH] AFEB9260 support + + +Signed-off-by: Sergey Lapin <slapin@ossfans.org> +--- + Config.in | 5 +- + Makefile | 2 +- + board/Config.in | 47 +++++- + board/afeb9260/afeb9260.c | 246 +++++++++++++++++++++++++++++ + board/afeb9260/afeb9260.h | 126 +++++++++++++++ + board/afeb9260/afeb9260_defconfig | 94 +++++++++++ + board/afeb9260/old/afeb9260.c | 240 ++++++++++++++++++++++++++++ + board/afeb9260/old/afeb9260.mk | 8 + + board/afeb9260/old/dataflash/afeb9260.h | 127 +++++++++++++++ + board/afeb9260/old/nandflash/afeb9260ek.h | 151 ++++++++++++++++++ + board/afeb9260/old/pll.h | 35 ++++ + board/board_cpp.mk | 25 +++ + driver/Config.in.dataflash | 2 +- + driver/dataflash.c | 2 +- + include/part.h | 6 + + 15 files changed, 1105 insertions(+), 11 deletions(-) + create mode 100644 board/afeb9260/afeb9260.c + create mode 100644 board/afeb9260/afeb9260.h + create mode 100644 board/afeb9260/afeb9260_defconfig + create mode 100644 board/afeb9260/old/afeb9260.c + create mode 100644 board/afeb9260/old/afeb9260.mk + create mode 100644 board/afeb9260/old/dataflash/afeb9260.h + create mode 100644 board/afeb9260/old/nandflash/afeb9260ek.h + create mode 100644 board/afeb9260/old/pll.h + +diff --git a/Config.in b/Config.in +index e187a27..d7f7a3b 100644 +--- a/Config.in ++++ b/Config.in +@@ -109,4 +109,7 @@ config CONFIG_USER_HW_INIT + help + Initialize Hardware + +- ++config CONFIG_THUMB ++ bool "Build in thumb mode" ++ help ++ Build code in thumb mode +diff --git a/Makefile b/Makefile +index 32bd556..8a53e94 100644 +--- a/Makefile ++++ b/Makefile +@@ -189,7 +189,7 @@ include driver/driver_cpp.mk + # -lgcc : tells the linker to tie in newlib + LDFLAGS+=-nostartfiles -Map=result/$(BOOT_NAME).map --cref + #LDFLAGS+=-lc -lgcc +-LDFLAGS+=-T elf32-littlearm.lds -Ttext $(LINK_ADDR) ++LDFLAGS+=-T elf32-littlearm.lds --gc-sections -Ttext $(LINK_ADDR) + + all: $(obj) $(AT91BOOTSTRAP) .config filesize + +diff --git a/board/Config.in b/board/Config.in +index 074018a..1c2168b 100644 +--- a/board/Config.in ++++ b/board/Config.in +@@ -92,6 +92,17 @@ config CONFIG_AT91CAP9ADK + help + Use the AT91CAP9ADK Development board + ++config CONFIG_AFEB9260 ++ bool "afeb9260" ++ select CONFIG_SDRAM ++ select ALLOW_DATAFLASH ++ select ALLOW_NANDFLASH ++ select ALLOW_CPU_CLK_166MHZ ++ select ALLOW_CPU_CLK_180MHZ ++ select ALLOW_CRYSTAL_18_432MHZ ++ help ++ Use the AFEB9260 Development board ++ + endchoice + + config CONFIG_CHIP +@@ -103,6 +114,7 @@ config CONFIG_CHIP + default "AT91SAM9XE" if CONFIG_AT91SAM9XEEK + default "AT91SAM9G20" if CONFIG_AT91SAM9G20EK + default "AT91CAP9" if CONFIG_AT91CAP9ADK ++ default "AT91SAM9260" if CONFIG_AFEB9260 + help + Name of the board, A Board Support package + (BSP) must be available. +@@ -116,6 +128,7 @@ config CONFIG_BOARD + default "at91sam9xeek" if CONFIG_AT91SAM9XEEK + default "at91sam9g20ek" if CONFIG_AT91SAM9G20EK + default "at91cap9adk" if CONFIG_AT91CAP9ADK ++ default "afeb9260" if CONFIG_AFEB9260 + help + Name of the board, A Board Support package + (BSP) must be available. +@@ -129,6 +142,7 @@ config CONFIG_MACH_TYPE + default "0x44B" if CONFIG_AT91SAM9XEEK + default "0x658" if CONFIG_AT91SAM9G20EK + default "1442" if CONFIG_AT91CAP9ADK ++ default "1859" if CONFIG_AFEB9260 + help + + config CONFIG_LINK_ADDR +@@ -141,6 +155,7 @@ config CONFIG_LINK_ADDR + default "0x200000" if CONFIG_AT91SAM9G20EK + default "0x000000" if CONFIG_AT91CAP9ADK && CONFIG_DATAFLASH + default "0x100000" if CONFIG_AT91CAP9ADK && CONFIG_FLASH ++ default "0x200000" if CONFIG_AFEB9260 + default "0x200000" + help + +@@ -153,11 +168,13 @@ config CONFIG_TOP_OF_MEMORY + default "0x301000" if CONFIG_AT91SAM9XEEK + default "0x301000" if CONFIG_AT91SAM9G20EK + default "0x108000" if CONFIG_AT91CAP9ADK ++ default "0x301000" if CONFIG_AFEB9260 + help + + config CONFIG_BOOTSTRAP_MAXSIZE + string + default "4096" if CONFIG_AT91SAM9260EK ++ default "4096" if CONFIG_AFEB9260 + default "16384" + + choice +@@ -212,6 +229,14 @@ choice + prompt "CPU clock" + default CONFIG_CPU_CLK_200MHZ + ++config CONFIG_CPU_CLK_166MHZ ++ bool "166 MHz" ++ depends on ALLOW_CPU_CLK_166MHZ ++ ++config CONFIG_CPU_CLK_180MHZ ++ bool "180 MHz" ++ depends on ALLOW_CPU_CLK_180MHZ ++ + config CONFIG_CPU_CLK_200MHZ + bool "200 MHz" + depends on ALLOW_CPU_CLK_200MHZ +@@ -231,6 +256,12 @@ config CONFIG_CPU_CLK_400MHZ + + endchoice + ++config ALLOW_CPU_CLK_166MHZ ++ bool ++ ++config ALLOW_CPU_CLK_180MHZ ++ bool ++ + config ALLOW_CPU_CLK_200MHZ + bool + +@@ -251,10 +282,18 @@ config DISABLE_CPU_CLK_240MHZ + choice + prompt "Bus Speed" + default CONFIG_BUS_SPEED_133MHZ +- depends on CONFIG_AT91SAM9G20EK ++ depends on CONFIG_AT91SAM9G20EK || CONFIG_AFEB9260 + help + Select the speed of the bus + ++config CONFIG_BUS_SPEED_83MHZ ++ bool "83 MHz" ++ depends on CONFIG_AFEB9260 ++ ++config CONFIG_BUS_SPEED_90MHZ ++ bool "90 MHz" ++ depends on CONFIG_AFEB9260 ++ + config CONFIG_BUS_SPEED_100MHZ + bool "100 MHz" + depends on CONFIG_AT91SAM9G20EK +@@ -264,9 +303,3 @@ config CONFIG_BUS_SPEED_133MHZ + depends on CONFIG_AT91SAM9G20EK + + endchoice +- +- +- +- +- +- +diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c +new file mode 100644 +index 0000000..4e11b6b +--- /dev/null ++++ b/board/afeb9260/afeb9260.c +@@ -0,0 +1,246 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2006, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : at91sam9260ek.c ++ * Object : ++ * Creation : NLe Jul 13th 2006 ++ * ODi Nov 9th : dstp #3507 "Bad PIO descriptors in at91samxxxek.c" ++ *----------------------------------------------------------------------------- ++ */ ++#include "part.h" ++#include "main.h" ++#include "gpio.h" ++#include "pmc.h" ++#include "debug.h" ++#include "memory.h" ++ ++static inline unsigned int get_cp15(void) ++{ ++ unsigned int value; ++ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value)); ++ return value; ++} ++ ++static inline void set_cp15(unsigned int value) ++{ ++ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value)); ++} ++ ++#ifdef CONFIG_HW_INIT ++/*----------------------------------------------------------------------------*/ ++/* \fn hw_init */ ++/* \brief This function performs very low level HW initialization */ ++/* This function is invoked as soon as possible during the c_startup */ ++/* The bss segment must be initialized */ ++/*----------------------------------------------------------------------------*/ ++void hw_init(void) ++{ ++ unsigned int cp15; ++ ++ /* Disable watchdog */ ++ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR); ++ ++ /* At this stage the main oscillator is supposed to be enabled ++ * PCK = MCK = MOSC */ ++ ++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ ++ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* PCK = PLLA = 2 * MCK */ ++ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT); ++ /* Switch MCK on PLLA output */ ++ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* Configure PLLB */ ++ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* Configure CP15 */ ++ cp15 = get_cp15(); ++ cp15 |= I_CACHE; ++ set_cp15(cp15); ++ ++ /* Configure the PIO controller */ ++ writel(3 << 14, AT91C_BASE_PIOB + PIO_ASR(0)); ++ writel(3 << 14, AT91C_BASE_PIOB + PIO_PDR(0)); ++ ++ /* Configure the EBI Slave Slot Cycle to 64 */ ++ writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3)); ++ ++#ifdef CONFIG_DEBUG ++ /* Enable Debug messages on the DBGU */ ++ dbg_init(BAUDRATE(MASTER_CLOCK, 115200)); ++ header(); ++#endif /* CONFIG_DEBUG */ ++ ++#ifdef CONFIG_SDRAM ++ /* Initialize the matrix */ ++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++#if defined(CONFIG_BUS_SPEED_83MHZ) || defined(CONFIG_BUS_SPEED_90MHZ) ++/* CLK= 11ns */ ++/* TWR = tDPL = 2 2CLK always */ ++/* TRC = tRC = 65ns = 6 clk */ ++/* TRP = tRP = 20ns = 2 clk */ ++/* TRCD = tRCD = 20ns = 2 clk */ ++/* TRAS = tRAS = 45ns = 5 clk */ ++/* TXSR = tRRC = 65ns = 6 clk */ ++ ++ sdram_init( AT91C_SDRAMC_NC_9 | ++ AT91C_SDRAMC_NR_13 | ++ AT91C_SDRAMC_CAS_2 | ++ AT91C_SDRAMC_NB_4_BANKS | ++ AT91C_SDRAMC_DBW_32_BITS | ++ AT91C_SDRAMC_TWR_2 | ++ AT91C_SDRAMC_TRC_6 | /* *7 */ ++ AT91C_SDRAMC_TRP_2 | ++ AT91C_SDRAMC_TRCD_2 | ++ AT91C_SDRAMC_TRAS_5 | /* *5 */ ++ AT91C_SDRAMC_TXSR_6, /* *8 */ /* Control Register */ ++ 710, AT91C_SDRAMC_MD_SDRAM); /* Refresh Timer Register */ ++#else ++ /* Configure SDRAM Controller */ ++ sdram_init( AT91C_SDRAMC_NC_9 | ++ AT91C_SDRAMC_NR_13 | ++ AT91C_SDRAMC_CAS_2 | ++ AT91C_SDRAMC_NB_4_BANKS | ++ AT91C_SDRAMC_DBW_32_BITS | ++ AT91C_SDRAMC_TWR_2 | ++ AT91C_SDRAMC_TRC_7 | ++ AT91C_SDRAMC_TRP_2 | ++ AT91C_SDRAMC_TRCD_2 | ++ AT91C_SDRAMC_TRAS_5 | ++ AT91C_SDRAMC_TXSR_8, /* Control Register */ ++ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */ ++ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */ ++#endif ++ ++#endif /* CONFIG_SDRAM */ ++} ++#endif /* CONFIG_HW_INIT */ ++ ++#ifdef CONFIG_SDRAM ++/*------------------------------------------------------------------------------*/ ++/* \fn sdramc_hw_init */ ++/* \brief This function performs SDRAMC HW initialization */ ++/*------------------------------------------------------------------------------*/ ++void sdramc_hw_init(void) ++{ ++ /* Configure PIOs */ ++/* const struct pio_desc sdramc_pio[] = { ++ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++*/ ++ /* Configure the SDRAMC PIO controller to output PCK0 */ ++/* pio_setup(sdramc_pio); */ ++ ++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0)); ++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0)); ++ ++} ++#endif /* CONFIG_SDRAM */ ++ ++#ifdef CONFIG_DATAFLASH ++/*------------------------------------------------------------------------------*/ ++/* \fn df_hw_init */ ++/* \brief This function performs DataFlash HW initialization */ ++/*------------------------------------------------------------------------------*/ ++void df_hw_init(void) ++{ ++ writel(0xf, 0xfffff444); ++ writel(0xf, 0xfffff460); ++ writel(0xf, 0xfffff470); ++ writel(0xf, 0xfffff404); ++ writel(1 << 11, AT91C_BASE_PIOC + PIO_BSR(0)); ++ writel(1 << 11, AT91C_BASE_PIOC + PIO_PDR(0)); ++} ++#endif /* CONFIG_DATAFLASH */ ++ ++/* We init NAND regardless of whatever */ ++/*------------------------------------------------------------------------------*/ ++/* \fn nandflash_hw_init */ ++/* \brief NandFlash HW init */ ++/*------------------------------------------------------------------------------*/ ++void nandflash_hw_init(void) ++{ ++ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */ ++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* Configure SMC CS3 */ ++ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3); ++ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3); ++ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3); ++ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | ++ AT91C_SMC_DBW_WIDTH_EIGTH_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3); ++ ++ /* Configure the PIO controller */ ++ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC); ++ ++ writel(1 << 13, AT91C_BASE_PIOC + PIO_IFDR(0)); ++ writel(1 << 13, AT91C_BASE_PIOC + PIO_PPUER(0)); ++ writel(1 << 13, AT91C_BASE_PIOC + PIO_ODR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_CODR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_MDDR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_PPUDR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_OER(0)); ++ writel(3 << 13, AT91C_BASE_PIOC + PIO_IDR(0)); ++ writel(3 << 13, AT91C_BASE_PIOC + PIO_PER(0)); ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn nandflash_cfg_16bits_dbw_init */ ++/* \brief Configure SMC in 16 bits mode */ ++/*------------------------------------------------------------------------------*/ ++void nandflash_cfg_16bits_dbw_init(void) ++{ ++ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3); ++} ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn nandflash_cfg_8bits_dbw_init */ ++/* \brief Configure SMC in 8 bits mode */ ++/*------------------------------------------------------------------------------*/ ++void nandflash_cfg_8bits_dbw_init(void) ++{ ++ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3); ++} +diff --git a/board/afeb9260/afeb9260.h b/board/afeb9260/afeb9260.h +new file mode 100644 +index 0000000..7310c0f +--- /dev/null ++++ b/board/afeb9260/afeb9260.h +@@ -0,0 +1,126 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2006, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : afeb9260.h ++ * Object : ++ * Creation : NLe Jul 13th 2006 ++ *----------------------------------------------------------------------------- ++ */ ++#ifndef _AFEB9260_H ++#define _AFEB9260_H ++ ++/* ******************************************************************* */ ++/* PMC Settings */ ++/* */ ++/* The main oscillator is enabled as soon as possible in the c_startup */ ++/* and MCK is switched on the main oscillator. */ ++/* PLL initialization is done later in the hw_init() function */ ++/* ******************************************************************* */ ++#if defined(CONFIG_CPU_CLK_200MHZ) ++#define MASTER_CLOCK (198656000/2) ++#define PLLA_SETTINGS 0x2060BF09 ++#endif ++ ++#if defined(CONFIG_CPU_CLK_166MHZ) ++#define PLLA_SETTINGS 0x25ceBFa5 /* 166MHz */ ++#define MASTER_CLOCK (165999709/2) /* 166MHz MCK=83MHz*/ ++#endif ++ ++#if defined(CONFIG_CPU_CLK_180MHZ) ++#define PLLA_SETTINGS 0x2125BF1E /* 180MHz */ ++#define MASTER_CLOCK (179999198/2) /* 180MHz MCK=90MHz */ ++#endif ++ ++#define TOP_OF_MEMORY 0x301000 ++#define PLL_LOCK_TIMEOUT 1000000 ++ ++#define PLLB_SETTINGS 0x10483F0E ++ ++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */ ++#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2) ++#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS) ++ ++/* ******************************************************************* */ ++/* DataFlash Settings */ ++/* */ ++/* ******************************************************************* */ ++#define AT91C_BASE_SPI AT91C_BASE_SPI0 ++#define AT91C_ID_SPI AT91C_ID_SPI0 ++ ++/* AC characteristics */ ++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */ ++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */ ++ ++#define DF_CS_SETTINGS (AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8)) ++ ++/* ******************************************************************* */ ++/* NandFlash Settings */ ++/* */ ++/* ******************************************************************* */ ++#define AT91C_SMARTMEDIA_BASE 0x40000000 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */ ++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */ ++ ++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0) ++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0) ++ ++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13)) ++ ++ ++/* ******************************************************************** */ ++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/ ++/* Please refer to SMC section in AT91SAM datasheet to learn how */ ++/* to generate these values. */ ++/* ******************************************************************** */ ++#define AT91C_SM_NWE_SETUP (1 << 0) ++#define AT91C_SM_NCS_WR_SETUP (0 << 8) ++#define AT91C_SM_NRD_SETUP (1 << 16) ++#define AT91C_SM_NCS_RD_SETUP (0 << 24) ++ ++#define AT91C_SM_NWE_PULSE (3 << 0) ++#define AT91C_SM_NCS_WR_PULSE (3 << 8) ++#define AT91C_SM_NRD_PULSE (3 << 16) ++#define AT91C_SM_NCS_RD_PULSE (3 << 24) ++ ++#define AT91C_SM_NWE_CYCLE (5 << 0) ++#define AT91C_SM_NRD_CYCLE (5 << 16) ++#define AT91C_SM_TDF (2 << 16) ++ ++#endif /* _AT91SAM9260EK_H */ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ +diff --git a/board/afeb9260/afeb9260_defconfig b/board/afeb9260/afeb9260_defconfig +new file mode 100644 +index 0000000..bf8b6f9 +--- /dev/null ++++ b/board/afeb9260/afeb9260_defconfig +@@ -0,0 +1,94 @@ ++# ++# Automatically generated make config: don't edit ++# Sun May 10 01:26:05 2009 ++# ++HAVE_DOT_CONFIG=y ++CONFIG_BOARDNAME="afeb9260" ++# CONFIG_AT91SAM9260EK is not set ++# CONFIG_AT91SAM9261EK is not set ++# CONFIG_AT91SAM9263EK is not set ++# CONFIG_AT91SAM9RLEK is not set ++# CONFIG_AT91SAM9XEEK is not set ++# CONFIG_AT91SAM9G20EK is not set ++# CONFIG_AT91CAP9ADK is not set ++CONFIG_AFEB9260=y ++CONFIG_CHIP="AT91SAM9260" ++CONFIG_BOARD="afeb9260" ++CONFIG_MACH_TYPE="1859" ++CONFIG_LINK_ADDR="0x200000" ++CONFIG_TOP_OF_MEMORY="0x301000" ++CONFIG_BOOTSTRAP_MAXSIZE="4096" ++# CONFIG_CRYSTAL_12_000MHZ is not set ++# CONFIG_CRYSTAL_16_000MHZ is not set ++# CONFIG_CRYSTAL_16_36766MHZ is not set ++CONFIG_CRYSTAL_18_432MHZ=y ++ALLOW_CRYSTAL_18_432MHZ=y ++CONFIG_CRYSTAL="CRYSTAL_18_432MHZ" ++CONFIG_CPU_CLK_166MHZ=y ++# CONFIG_CPU_CLK_180MHZ is not set ++# CONFIG_CPU_CLK_200MHZ is not set ++# CONFIG_CPU_CLK_240MHZ is not set ++# CONFIG_CPU_CLK_266MHZ is not set ++# CONFIG_CPU_CLK_400MHZ is not set ++ALLOW_CPU_CLK_166MHZ=y ++ALLOW_CPU_CLK_180MHZ=y ++# DISABLE_CPU_CLK_240MHZ is not set ++CONFIG_BUS_SPEED_83MHZ=y ++# CONFIG_BUS_SPEED_90MHZ is not set ++# CONFIG_BUS_SPEED_100MHZ is not set ++# CONFIG_BUS_SPEED_133MHZ is not set ++ ++# ++# Memory selection ++# ++CONFIG_SDRAM=y ++# CONFIG_SDDRC is not set ++# CONFIG_DDR2 is not set ++ALLOW_DATAFLASH=y ++# ALLOW_FLASH is not set ++ALLOW_NANDFLASH=y ++# ALLOW_SDCARD is not set ++# ALLOW_PSRAM is not set ++# ALLOW_SDRAM_16BIT is not set ++# CONFIG_RAM_32MB is not set ++CONFIG_RAM_64MB=y ++# CONFIG_RAM_128MB is not set ++# CONFIG_RAM_256MB is not set ++CONFIG_DATAFLASH=y ++# CONFIG_FLASH is not set ++# CONFIG_NANDFLASH is not set ++# CONFIG_SDCARD is not set ++CONFIG_MEMORY="dataflash" ++ ++# ++# SPI configuration ++# ++CONFIG_SPI_CLK=33000000 ++# CONFIG_SPI_BOOT_CS0 is not set ++CONFIG_SPI_BOOT_CS1=y ++# DATAFLASHCARD_ON_CS0 is not set ++# DATAFLASHCARD_ON_CS1 is not set ++# DATAFLASHCARD_ON_CS2 is not set ++# DATAFLASHCARD_ON_CS3 is not set ++# CONFIG_DATAFLASHCARD is not set ++CONFIG_CARD_SUFFIX="" ++CONFIG_SPI_BOOT="AT91C_SPI_PCS1_DATAFLASH" ++CONFIG_SPI_MODE_0=y ++# CONFIG_SPI_MODE_1 is not set ++# CONFIG_SPI_MODE_2 is not set ++# CONFIG_SPI_MODE_3 is not set ++CONFIG_SPI_MODE=0 ++CONFIG_PROJECT="dataflash" ++CONFIG_LOAD_UBOOT=y ++# CONFIG_LOAD_64KB is not set ++# CONFIG_LOAD_1MB is not set ++# CONFIG_LOAD_4MB is not set ++CONFIG_IMG_ADDRESS="0x00008400" ++CONFIG_IMG_SIZE="0x00040000" ++CONFIG_JUMP_ADDR="0x23F00000" ++CONFIG_APP_CHECK=y ++# CONFIG_LONG_TEST is not set ++CONFIG_DEBUG=y ++CONFIG_HW_INIT=y ++# CONFIG_USER_HW_INIT is not set ++CONFIG_THUMB=y +diff --git a/board/afeb9260/old/afeb9260.c b/board/afeb9260/old/afeb9260.c +new file mode 100644 +index 0000000..81c0919 +--- /dev/null ++++ b/board/afeb9260/old/afeb9260.c +@@ -0,0 +1,240 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2006, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * - Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the disclaimer below in the documentation and/or ++ * other materials provided with the distribution. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : at91sam9260ek.c ++ * Object : ++ * Creation : NLe Jul 13th 2006 ++ * ODi Nov 9th : dstp #3507 "Bad PIO descriptors in at91samxxxek.c" ++ *----------------------------------------------------------------------------- ++ */ ++#include "../../include/part.h" ++#include "../../include/gpio.h" ++#include "../../include/pmc.h" ++#include "../../include/debug.h" ++#include "../../include/sdramc.h" ++#include "../../include/main.h" ++#ifdef CFG_NANDFLASH ++#include "../../include/nandflash.h" ++#endif ++#ifdef CFG_DATAFLASH ++#include "../../include/dataflash.h" ++#endif ++#ifdef CFG_FLASH ++#include "../../include/flash.h" ++#endif ++ ++/* We init NAND regardless of whatever */ ++/*------------------------------------------------------------------------------*/ ++/* \fn nandflash_hw_init */ ++/* \brief NandFlash HW init */ ++/*------------------------------------------------------------------------------*/ ++void nandflash_hw_init(void) ++{ ++ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */ ++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* Configure SMC CS3 */ ++ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3); ++ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3); ++ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3); ++ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | ++ AT91C_SMC_DBW_WIDTH_EIGTH_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3); ++ ++ /* Configure the PIO controller */ ++ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC); ++ ++ writel(1 << 13, AT91C_BASE_PIOC + PIO_IFDR(0)); ++ writel(1 << 13, AT91C_BASE_PIOC + PIO_PPUER(0)); ++ writel(1 << 13, AT91C_BASE_PIOC + PIO_ODR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_CODR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_MDDR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_PPUDR(0)); ++ writel(1 << 14, AT91C_BASE_PIOC + PIO_OER(0)); ++ writel(3 << 13, AT91C_BASE_PIOC + PIO_IDR(0)); ++ writel(3 << 13, AT91C_BASE_PIOC + PIO_PER(0)); ++} ++ ++ ++#ifdef CFG_HW_INIT ++/*----------------------------------------------------------------------------*/ ++/* \fn hw_init */ ++/* \brief This function performs very low level HW initialization */ ++/* This function is invoked as soon as possible during the c_startup */ ++/* The bss segment must be initialized */ ++/*----------------------------------------------------------------------------*/ ++void hw_init(void) ++{ ++ /* Disable watchdog */ ++ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR); ++ ++ /* At this stage the main oscillator is supposed to be enabled ++ * PCK = MCK = MOSC */ ++ ++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ ++ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */ ++ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* Configure PLLB */ ++ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* Configure the PIO controller */ ++ writel(3 << 14, AT91C_BASE_PIOB + PIO_ASR(0)); ++ writel(3 << 14, AT91C_BASE_PIOB + PIO_PDR(0)); ++ ++#ifdef CFG_DEBUG ++ /* Enable Debug messages on the DBGU */ ++ dbg_init(BAUDRATE(MASTER_CLOCK, 115200)); ++ ++ dbg_print("AT91 bootstrap loading from 0x8400\n\r"); ++#endif /* CFG_DEBUG */ ++ ++#ifdef CFG_SDRAM ++ /* Initialize the matrix */ ++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* Configure SDRAM Controller */ ++ ++#define HYNIX ++ ++//#define MICRON ++#ifdef MICRON ++#define MICRON_REFRESH 1420 /* 15.625 us / 11 ns @ 180 Mhz*/ ++ sdram_init( AT91C_SDRAMC_NC_9 | ++ AT91C_SDRAMC_NR_12 | ++ AT91C_SDRAMC_CAS_2 | ++ AT91C_SDRAMC_NB_4_BANKS | ++ AT91C_SDRAMC_DBW_32_BITS | ++ AT91C_SDRAMC_TWR_2 | // 1 CLK+7ns ++ AT91C_SDRAMC_TRC_7 | // 60 ns ++ AT91C_SDRAMC_TRP_3 | // 15 ns ++ AT91C_SDRAMC_TRCD_3 | // 15 ns ++ AT91C_SDRAMC_TRAS_7 | // 37-120 ns ++ AT91C_SDRAMC_TXSR_7, /* 67ns */ /* Control Register */ ++ /* 600 700 735 */ MICRON_REFRESH /* 740 1536*/ ); /* Refresh Timer Register */ ++ ++#endif ++/* ++HY57V561620BT-H ++ *CAS lat *tRCD *tRAS *tRC *tRP tAC tOH ++133 2 2 6 8 2 5.4ns 2.7ns ++125 3 3 6 9 3 6ns 3ns ++100 2 2 5 7 2 6ns 3ns ++ ++*/ ++#ifdef HYNIX ++#if defined(PLLA_180MHz) ++/* CLK= 11ns */ ++/* TWR = tDPL = 2 2CLK always */ ++/* TRC = tRC = 65ns = 6 clk */ ++/* TRP = tRP = 20ns = 2 clk */ ++/* TRCD = tRCD = 20ns = 2 clk */ ++/* TRAS = tRAS = 45ns = 5 clk */ ++/* TXSR = tRRC = 65ns = 6 clk */ ++ ++ sdram_init( AT91C_SDRAMC_NC_9 | ++ AT91C_SDRAMC_NR_13 | ++ AT91C_SDRAMC_CAS_2 | ++ AT91C_SDRAMC_NB_4_BANKS | ++ AT91C_SDRAMC_DBW_32_BITS | ++ AT91C_SDRAMC_TWR_2 | ++ AT91C_SDRAMC_TRC_6 | /* *7 */ ++ AT91C_SDRAMC_TRP_2 | ++ AT91C_SDRAMC_TRCD_2 | ++ AT91C_SDRAMC_TRAS_5 | /* *5 */ ++ AT91C_SDRAMC_TXSR_6, /* *8 */ /* Control Register */ ++ 710); /* Refresh Timer Register */ ++ ++#elif defined(PLLA_120MHz) ++/* CLK= 16ns, MCLK=60MHz */ ++/* TWR = tDPL = 2 2CLK always */ ++/* TRC = tRC = 65ns = 4 clk */ ++/* TRP = tRP = 20ns = 2 clk */ ++/* TRCD = tRCD = 20ns = 2 clk */ ++/* TRAS = tRAS = 45ns = 3 clk */ ++/* TXSR = tRRC = 65ns = 4 clk */ ++ ++ sdram_init( AT91C_SDRAMC_NC_9 | ++ AT91C_SDRAMC_NR_13 | ++ AT91C_SDRAMC_CAS_2 | ++ AT91C_SDRAMC_NB_4_BANKS | ++ AT91C_SDRAMC_DBW_32_BITS | ++ AT91C_SDRAMC_TWR_2 | ++ AT91C_SDRAMC_TRC_4 | ++ AT91C_SDRAMC_TRP_2 | ++ AT91C_SDRAMC_TRCD_2 | ++ AT91C_SDRAMC_TRAS_3 | /* *5 */ ++ AT91C_SDRAMC_TXSR_4, /* *8 */ /* Control Register */ ++ 1032); /* Refresh Timer Register */ ++#else ++#error define PLLA180MHz ++#endif ++#endif /* HYNIX */ ++#endif /* CFG_SDRAM */ ++ ++#ifdef CFG_FLASH ++ flash_hw_init(); ++#endif ++ nandflash_hw_init(); ++} ++#endif /* CFG_HW_INIT */ ++ ++#ifdef CFG_SDRAM ++/*------------------------------------------------------------------------------*/ ++/* \fn sdramc_hw_init */ ++/* \brief This function performs SDRAMC HW initialization */ ++/*------------------------------------------------------------------------------*/ ++void sdramc_hw_init(void) ++{ ++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0)); ++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0)); ++ ++} ++#endif /* CFG_SDRAM */ ++ ++#ifdef CFG_DATAFLASH ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn df_hw_init */ ++/* \brief This function performs DataFlash HW initialization */ ++/*------------------------------------------------------------------------------*/ ++void df_hw_init(void) ++{ ++ writel(0xf, 0xfffff444); ++ writel(0xf, 0xfffff460); ++ writel(0xf, 0xfffff470); ++ writel(0xf, 0xfffff404); ++ writel(1 << 11, AT91C_BASE_PIOC + PIO_BSR(0)); ++ writel(1 << 11, AT91C_BASE_PIOC + PIO_PDR(0)); ++} ++#endif /* CFG_DATAFLASH */ ++ +diff --git a/board/afeb9260/old/afeb9260.mk b/board/afeb9260/old/afeb9260.mk +new file mode 100644 +index 0000000..88c2f64 +--- /dev/null ++++ b/board/afeb9260/old/afeb9260.mk +@@ -0,0 +1,8 @@ ++# Target name (case sensitive!!!) ++TARGET=AFEB9260 ++# Board name (case sensitive!!!) ++BOARD=afeb9260 ++# Link Address and Top_of_Memory ++LINK_ADDR=0x200000 ++TOP_OF_MEMORY=0x301000 ++ +diff --git a/board/afeb9260/old/dataflash/afeb9260.h b/board/afeb9260/old/dataflash/afeb9260.h +new file mode 100644 +index 0000000..8e60faa +--- /dev/null ++++ b/board/afeb9260/old/dataflash/afeb9260.h +@@ -0,0 +1,127 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2006, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * - Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the disclaimer below in the documentation and/or ++ * other materials provided with the distribution. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : at91sam9260ek.h ++ * Object : ++ * Creation : NLe Jul 13th 2006 ++ *----------------------------------------------------------------------------- ++ */ ++#ifndef _AFEB9260_H ++#define _AFEB9260_H ++#include "spi.h" ++#include "pll.h" ++ ++/* ******************************************************************* */ ++/* DataFlash Settings */ ++/* */ ++/* ******************************************************************* */ ++#define AT91C_BASE_SPI AT91C_BASE_SPI0 ++#define AT91C_ID_SPI AT91C_ID_SPI0 ++ ++/* SPI CLOCK */ ++#define AT91C_SPI_CLK 5000000 ++/* AC characteristics */ ++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */ ++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */ ++ ++#define DF_CS_SETTINGS ((SPI_MODE) | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8)) ++ ++ ++/* ******************************************************************* */ ++/* BootStrap Settings */ ++/* */ ++/* ******************************************************************* */ ++#define MACH_TYPE 0x44B /* AT91SAM9260-EK */ ++ ++#define IMG_ADDRESS 0x8400 /* Image Address in DataFlash */ ++ ++#if defined(IMG_SIZE) ++#warning "IMG_SIZE redefined" ++#else ++#define IMG_SIZE 0x39000 /* Image Size in DataFlash */ ++#endif ++ ++#if defined(JUMP_ADDR) ++#warning "JUMP_ADDR redefined" ++#else ++#define JUMP_ADDR 0x21F00000 /* Final Jump Address */ ++#endif ++ ++/* ******************************************************************* */ ++/* NandFlash Settings */ ++/* */ ++/* ******************************************************************* */ ++#define AT91C_SMARTMEDIA_BASE 0x40000000 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */ ++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */ ++ ++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0) ++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0) ++ ++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13)) ++ ++ ++/* ******************************************************************** */ ++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/ ++/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000. */ ++/* Please refer to SMC section in AT91SAM9261 datasheet to learn how */ ++/* to generate these values. */ ++/* ******************************************************************** */ ++ ++#define AT91C_SM_NWE_SETUP (2 << 0) ++#define AT91C_SM_NCS_WR_SETUP (2 << 8) ++#define AT91C_SM_NRD_SETUP (2 << 16) ++#define AT91C_SM_NCS_RD_SETUP (2 << 24) ++ ++#define AT91C_SM_NWE_PULSE (4 << 0) ++#define AT91C_SM_NCS_WR_PULSE (4 << 8) ++#define AT91C_SM_NRD_PULSE (4 << 16) ++#define AT91C_SM_NCS_RD_PULSE (4 << 24) ++ ++#define AT91C_SM_NWE_CYCLE (8 << 0) ++#define AT91C_SM_NRD_CYCLE (8 << 16) ++ ++#define AT91C_SM_TDF (2 << 16) ++ ++ ++ ++/* ******************************************************************* */ ++/* Application Settings */ ++/* ******************************************************************* */ ++#define CFG_DEBUG ++#define CFG_DATAFLASH ++#define CFG_SDRAM ++#define CFG_HW_INIT ++ ++ ++#endif /* _AT91SAM9260EK_H */ +diff --git a/board/afeb9260/old/nandflash/afeb9260ek.h b/board/afeb9260/old/nandflash/afeb9260ek.h +new file mode 100644 +index 0000000..752ae0a +--- /dev/null ++++ b/board/afeb9260/old/nandflash/afeb9260ek.h +@@ -0,0 +1,151 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2006, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaimer below. ++ * ++ * - Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the disclaimer below in the documentation and/or ++ * other materials provided with the distribution. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : at91sam9260ek.h ++ * Object : ++ * Creation : NLe Sep 28th 2006 ++ *----------------------------------------------------------------------------- ++ */ ++#ifndef _AFEB9260_H ++#define _AFEB9260_H ++#include "spi.h" ++#include "pll.h" ++ ++/* ******************************************************************* */ ++/* DataFlash Settings */ ++/* */ ++/* ******************************************************************* */ ++#define AT91C_BASE_SPI AT91C_BASE_SPI0 ++#define AT91C_ID_SPI AT91C_ID_SPI0 ++ ++/* SPI CLOCK */ ++#define AT91C_SPI_CLK 5000000 ++/* AC characteristics */ ++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */ ++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */ ++ ++#define DF_CS_SETTINGS ((SPI_MODE) | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8)) ++ ++ ++/* ******************************************************************* */ ++/* NandFlash Settings */ ++/* */ ++/* ******************************************************************* */ ++#define AT91C_SMARTMEDIA_BASE 0x40000000 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */ ++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */ ++ ++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0) ++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0) ++ ++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13)) ++ ++ ++/* ******************************************************************** */ ++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/ ++/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000. */ ++/* Please refer to SMC section in AT91SAM9261 datasheet to learn how */ ++/* to generate these values. */ ++/* ******************************************************************** */ ++ ++#define AT91C_SM_NWE_SETUP (2 << 0) ++#define AT91C_SM_NCS_WR_SETUP (2 << 8) ++#define AT91C_SM_NRD_SETUP (2 << 16) ++#define AT91C_SM_NCS_RD_SETUP (2 << 24) ++ ++#define AT91C_SM_NWE_PULSE (4 << 0) ++#define AT91C_SM_NCS_WR_PULSE (4 << 8) ++#define AT91C_SM_NRD_PULSE (4 << 16) ++#define AT91C_SM_NCS_RD_PULSE (4 << 24) ++ ++#define AT91C_SM_NWE_CYCLE (8 << 0) ++#define AT91C_SM_NRD_CYCLE (8 << 16) ++ ++#define AT91C_SM_TDF (2 << 16) ++ ++ ++/* ******************************************************************** */ ++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/ ++/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000. */ ++/* Please refer to SMC section in AT91SAM9261 datasheet to learn how */ ++/* to generate these values. */ ++/* ******************************************************************** */ ++/*#define AT91C_SM_NWE_SETUP (0 << 0) ++#define AT91C_SM_NCS_WR_SETUP (0 << 8) ++#define AT91C_SM_NRD_SETUP (0 << 16) ++#define AT91C_SM_NCS_RD_SETUP (0 << 24) ++ ++#define AT91C_SM_NWE_PULSE (2 << 0) ++#define AT91C_SM_NCS_WR_PULSE (3 << 8) ++#define AT91C_SM_NRD_PULSE (2 << 16) ++#define AT91C_SM_NCS_RD_PULSE (3 << 24) ++ ++#define AT91C_SM_NWE_CYCLE (3 << 0) ++#define AT91C_SM_NRD_CYCLE (3 << 16) ++ ++#define AT91C_SM_TDF (1 << 16) ++*/ ++ ++/* ******************************************************************* */ ++/* BootStrap Settings */ ++/* */ ++/* ******************************************************************* */ ++#define MACH_TYPE 0x44B /* AT91SAM9260-EK */ ++ ++#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */ ++ ++#if defined(IMG_SIZE) ++#warning "IMG_SIZE redefined" ++#else ++#define IMG_SIZE 0x30000 /* Image Size in NandFlash */ ++#endif ++ ++#if defined(JUMP_ADDR) ++#warning "JUMP_ADDR redefined" ++#else ++#define JUMP_ADDR 0x23F00000 /* Final Jump Address */ ++#endif ++ ++/* ******************************************************************* */ ++/* Application Settings */ ++/* ******************************************************************* */ ++#define CFG_DEBUG ++#undef CFG_DATAFLASH ++ ++#define CFG_NANDFLASH ++#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */ ++ ++#define CFG_HW_INIT ++#define CFG_SDRAM ++ ++#endif /* _AT91SAM9260EK_H */ +diff --git a/board/afeb9260/old/pll.h b/board/afeb9260/old/pll.h +new file mode 100644 +index 0000000..6d20299 +--- /dev/null ++++ b/board/afeb9260/old/pll.h +@@ -0,0 +1,35 @@ ++/* ******************************************************************* */ ++/* PMC Settings */ ++/* */ ++/* The main oscillator is enabled as soon as possible in the c_startup */ ++/* and MCK is switched on the main oscillator. */ ++/* PLL initialization is done later in the hw_init() function */ ++/* ******************************************************************* */ ++#define PLL_LOCK_TIMEOUT 1000000 ++ ++#define PLLA_180MHz ++ ++#ifdef PLLA_200MHz ++#define PLLA_SETTINGS 0x2060BF09 ++#define MASTER_CLOCK (198656000/2) ++#endif ++ ++#ifdef PLLA_180MHz ++#define PLLA_SETTINGS 0x2125BF1E /* 180MHz */ ++#define MASTER_CLOCK (179999198/2) /* 180MHz MCK=90MHz */ ++#endif ++ ++#ifdef PLLA_120MHz ++//#define PLLA_SETTINGS 0x2125BF2d /* 120MHz */ ++//#define MASTER_CLOCK (119999322) /* 120MHz MCK=60MHz*/ ++#define PLLA_SETTINGS 0x2125BF2d /* 120MHz */ ++#define MASTER_CLOCK (119999465/2) /* 120MHz MCK=60MHz*/ ++#endif ++ ++#if !defined(PLLA_180MHz) && !defined(PLLA_120MHz) ++#error Define PLLA frequency ++#endif ++#define PLLB_SETTINGS 0x10483F0E ++ ++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */ ++#define MCKR_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2) +diff --git a/board/board_cpp.mk b/board/board_cpp.mk +index 9b91909..dd64467 100644 +--- a/board/board_cpp.mk ++++ b/board/board_cpp.mk +@@ -1,4 +1,13 @@ + ++ifeq ($(CONFIG_AFEB9260),y) ++CPPFLAGS += -DCONFIG_AFEB9260 ++ASFLAGS += -DCONFIG_AFEB9260 ++endif ++ ++ifeq ($(CONFIG_THUMB),y) ++CPPFLAGS += -mthumb -mthumb-interwork ++ASFLAGS += -DCONFIG_AFEB9260 -mthumb -mthumb-interwork ++endif + + CPPFLAGS += \ + -D$(CHIP) \ +@@ -35,6 +44,14 @@ endif + + # CPU clock + ++ifeq ($(CONFIG_CPU_CLK_180MHZ),y) ++CPPFLAGS += -DCONFIG_CPU_CLK_180MHZ ++endif ++ ++ifeq ($(CONFIG_CPU_CLK_166MHZ),y) ++CPPFLAGS += -DCONFIG_CPU_CLK_166MHZ ++endif ++ + ifeq ($(CONFIG_CPU_CLK_200MHZ),y) + CPPFLAGS += -DCONFIG_CPU_CLK_200MHZ + endif +@@ -53,6 +70,14 @@ endif + + # Bus speed + ++ifeq ($(CONFIG_BUS_SPEED_83MHZ),y) ++CPPFLAGS += -DCONFIG_BUS_SPEED_83MHZ ++endif ++ ++ifeq ($(CONFIG_BUS_SPEED_90MHZ),y) ++CPPFLAGS += -DCONFIG_BUS_SPEED_90MHZ ++endif ++ + ifeq ($(CONFIG_BUS_SPEED_100MHZ),y) + CPPFLAGS += -DCONFIG_BUS_SPEED_100MHZ + endif +diff --git a/driver/Config.in.dataflash b/driver/Config.in.dataflash +index 7853bc3..22367da 100644 +--- a/driver/Config.in.dataflash ++++ b/driver/Config.in.dataflash +@@ -24,7 +24,7 @@ config CONFIG_SPI_BOOT_CS0 + config CONFIG_SPI_BOOT_CS1 + bool "Boot from chip select 1" + depends on CONFIG_DATAFLASH +- depends on CONFIG_AT91SAM9260EK || CONFIG_AT91SAM9G20EK || CONFIG_AT91SAM9XEEK ++ depends on CONFIG_AT91SAM9260EK || CONFIG_AT91SAM9G20EK || CONFIG_AT91SAM9XEEK || CONFIG_AFEB9260 + + endchoice + +diff --git a/driver/dataflash.c b/driver/dataflash.c +index 43e2816..2619222 100644 +--- a/driver/dataflash.c ++++ b/driver/dataflash.c +@@ -533,7 +533,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi + if (df_init(pDf) == FAILURE) + return FAILURE; + +-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20) ++#if !defined(CONFIG_AFEB9260) && (defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)) + /* Test if a button has been pressed or not */ + /* Erase Page 0 to avoid infinite loop */ + df_recovery(pDf); +diff --git a/include/part.h b/include/part.h +index 39f1f2f..a5c30a6 100644 +--- a/include/part.h ++++ b/include/part.h +@@ -39,9 +39,15 @@ + + #ifdef AT91SAM9260 + #include "AT91SAM9260_inc.h" ++ ++#ifdef CONFIG_AFEB9260 ++#include "afeb9260.h" ++#else + #include "at91sam9260ek.h" + #endif + ++#endif ++ + #ifdef AT91SAM9XE + /* For all SAM9XE chips 128/256/512/.. we use the XE128 file */ + #include "AT91SAM9XE128_inc.h" +-- +1.5.6.5 + diff --git a/recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig b/recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig new file mode 100644 index 0000000000..bf8b6f9079 --- /dev/null +++ b/recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig @@ -0,0 +1,94 @@ +# +# Automatically generated make config: don't edit +# Sun May 10 01:26:05 2009 +# +HAVE_DOT_CONFIG=y +CONFIG_BOARDNAME="afeb9260" +# CONFIG_AT91SAM9260EK is not set +# CONFIG_AT91SAM9261EK is not set +# CONFIG_AT91SAM9263EK is not set +# CONFIG_AT91SAM9RLEK is not set +# CONFIG_AT91SAM9XEEK is not set +# CONFIG_AT91SAM9G20EK is not set +# CONFIG_AT91CAP9ADK is not set +CONFIG_AFEB9260=y +CONFIG_CHIP="AT91SAM9260" +CONFIG_BOARD="afeb9260" +CONFIG_MACH_TYPE="1859" +CONFIG_LINK_ADDR="0x200000" +CONFIG_TOP_OF_MEMORY="0x301000" +CONFIG_BOOTSTRAP_MAXSIZE="4096" +# CONFIG_CRYSTAL_12_000MHZ is not set +# CONFIG_CRYSTAL_16_000MHZ is not set +# CONFIG_CRYSTAL_16_36766MHZ is not set +CONFIG_CRYSTAL_18_432MHZ=y +ALLOW_CRYSTAL_18_432MHZ=y +CONFIG_CRYSTAL="CRYSTAL_18_432MHZ" +CONFIG_CPU_CLK_166MHZ=y +# CONFIG_CPU_CLK_180MHZ is not set +# CONFIG_CPU_CLK_200MHZ is not set +# CONFIG_CPU_CLK_240MHZ is not set +# CONFIG_CPU_CLK_266MHZ is not set +# CONFIG_CPU_CLK_400MHZ is not set +ALLOW_CPU_CLK_166MHZ=y +ALLOW_CPU_CLK_180MHZ=y +# DISABLE_CPU_CLK_240MHZ is not set +CONFIG_BUS_SPEED_83MHZ=y +# CONFIG_BUS_SPEED_90MHZ is not set +# CONFIG_BUS_SPEED_100MHZ is not set +# CONFIG_BUS_SPEED_133MHZ is not set + +# +# Memory selection +# +CONFIG_SDRAM=y +# CONFIG_SDDRC is not set +# CONFIG_DDR2 is not set +ALLOW_DATAFLASH=y +# ALLOW_FLASH is not set +ALLOW_NANDFLASH=y +# ALLOW_SDCARD is not set +# ALLOW_PSRAM is not set +# ALLOW_SDRAM_16BIT is not set +# CONFIG_RAM_32MB is not set +CONFIG_RAM_64MB=y +# CONFIG_RAM_128MB is not set +# CONFIG_RAM_256MB is not set +CONFIG_DATAFLASH=y +# CONFIG_FLASH is not set +# CONFIG_NANDFLASH is not set +# CONFIG_SDCARD is not set +CONFIG_MEMORY="dataflash" + +# +# SPI configuration +# +CONFIG_SPI_CLK=33000000 +# CONFIG_SPI_BOOT_CS0 is not set +CONFIG_SPI_BOOT_CS1=y +# DATAFLASHCARD_ON_CS0 is not set +# DATAFLASHCARD_ON_CS1 is not set +# DATAFLASHCARD_ON_CS2 is not set +# DATAFLASHCARD_ON_CS3 is not set +# CONFIG_DATAFLASHCARD is not set +CONFIG_CARD_SUFFIX="" +CONFIG_SPI_BOOT="AT91C_SPI_PCS1_DATAFLASH" +CONFIG_SPI_MODE_0=y +# CONFIG_SPI_MODE_1 is not set +# CONFIG_SPI_MODE_2 is not set +# CONFIG_SPI_MODE_3 is not set +CONFIG_SPI_MODE=0 +CONFIG_PROJECT="dataflash" +CONFIG_LOAD_UBOOT=y +# CONFIG_LOAD_64KB is not set +# CONFIG_LOAD_1MB is not set +# CONFIG_LOAD_4MB is not set +CONFIG_IMG_ADDRESS="0x00008400" +CONFIG_IMG_SIZE="0x00040000" +CONFIG_JUMP_ADDR="0x23F00000" +CONFIG_APP_CHECK=y +# CONFIG_LONG_TEST is not set +CONFIG_DEBUG=y +CONFIG_HW_INIT=y +# CONFIG_USER_HW_INIT is not set +CONFIG_THUMB=y diff --git a/recipes/at91bootstrap/at91bootstrap_2.11.bb b/recipes/at91bootstrap/at91bootstrap_2.11.bb new file mode 100644 index 0000000000..3a8cfb98af --- /dev/null +++ b/recipes/at91bootstrap/at91bootstrap_2.11.bb @@ -0,0 +1,7 @@ +require at91bootstrap.inc +PR = "r0" +DEFAULT_PREFERENCE = "-1" +DEFAULT_PREFERENCE_afeb9260 = "1" +DEFAULT_PREFERENCE_afeb9260-180 = "1" +SRC_URI += "file://0001-AFEB9260-support.patch;patch=1" + |