diff options
Diffstat (limited to 'packages')
77 files changed, 1162 insertions, 16979 deletions
diff --git a/packages/linux/nslu2-kernel.inc b/packages/linux/nslu2-kernel.inc index a0cc1daf25..39dcb6bed3 100644 --- a/packages/linux/nslu2-kernel.inc +++ b/packages/linux/nslu2-kernel.inc @@ -1,5 +1,3 @@ -# nslu2-kernel.inc -# # Standard definitions for any NSLU2 Linux kernel. # Include this file in a .bb which specifies, at least, # PN,PV,PR for the desired kernel @@ -7,32 +5,10 @@ # Define the following *before* including this file as # required: # -# N2K_EXTRA_FILES - kernel-tree path of extra files to install -# N2K_FILES - kernel-tree path of files to install, defaults to: -# drivers/i2c/chips/x1205-rtc.c -# arch/arm/mach-ixp4xx/nslu2-io.c -# arch/arm/mach-ixp4xx/nslu2-setup.c -# arch/arm/mach-ixp4xx/nslu2-pci.c -# arch/arm/mach-ixp4xx/nslu2-part.c -# include/asm-arm/arch-ixp4xx/nslu2.h -# ${N2K_EXTRA_FILES} -# -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# file://anonymiser.patch;patch=1 -# file://xscale-reset.patch;patch=1 -# file://mtd-shutdown.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# +# N2K_PATCHES - full list of patches to apply, to add files +# generate a patch against /dev/null # N2K_SUFFIX - the suffix to add after 'zImage-' in the -# deploy/images directory - defaults to "openslug" -# -# Notice that the N2K_PATCHES list is appropriate for -# openslug-kernel_2.6.11.2 and probably nothing else. +# deploy/images directory, should identify the image config # # DEFAULT_PREFERENCE is set automagically in this file as # follows: @@ -72,7 +48,6 @@ DEPENDS += "devio-native" # file). Files, including the all important defconfig, are # searched for in the following directories (last one first): # -# openslug-kernel-2.6.11.2 # nslu2-kernel/files # nslu2-kernel/X.Y # nslu2-kernel/X.Y.Z @@ -163,47 +138,23 @@ python () { # FILESPATH: this list is in order last-searched-first, therefore # the first entry is the *latest* and/or most specific -FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}:${FILE_DIRNAME}/openslug-kernel-2.6.11.2" +FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}" # The working directory will be the 'base' version (which may not be the # same as implied by the PV variable because it corresponds to the prior # minor version for rc and pre patched versions). S = "${WORKDIR}/linux-${N2K_SRCVER}" -# N2K_FILES is a list of additional files added to the source, these are -# put in place before the patches, so may themselves be patched. The list -# gives the path name relative to the base of the kernel source tree, the -# base file name is used to *find* the file. -N2K_EXTRA_FILES ?= -N2K_FILES ?= "\ - drivers/i2c/chips/x1205-rtc.c \ - arch/arm/mach-ixp4xx/nslu2-io.c \ - arch/arm/mach-ixp4xx/nslu2-setup.c \ - arch/arm/mach-ixp4xx/nslu2-pci.c \ - arch/arm/mach-ixp4xx/nslu2-part.c \ - include/asm-arm/arch-ixp4xx/nslu2.h \ - ${N2K_EXTRA_FILES}" - -N2K_SRCFILES = "${@( ' '.join([ ("file://" + n2k_file.split('/')[-1]) for n2k_file in bb.data.getVar("N2K_FILES",d,1).split(None) ]) )}" - -# N2K_PATCHES is a list of additional patches, the list specified -# here comes from the openslug-2.6.11.2 kernel, typically extra -# patches will be required and very often patches will need to -# be removed (i.e. the default is typically not very useful!) -N2K_EXTRA_PATCHES ?= -N2K_PATCHES ?= "\ - file://nslu2_2.6.11.patch;patch=1 \ - file://usbnet.patch;patch=1 \ - file://ixp4xx_copy_from.patch;patch=1 \ - file://anonymiser.patch;patch=1 \ - file://xscale-reset.patch;patch=1 \ - file://mtd-shutdown.patch;patch=1 \ - ${N2K_EXTRA_PATCHES}" +# N2K_PATCHES is the list of patches. +N2K_PATCHES ?= "" +# Image suffix - actually set in conf/machine/nslu2.conf as it is also +# used by anything which needs to know the name of the generated image. +# May be overridden in the distro if patches or defconfig are changed. +#FIXME: this can be removed, it is just here for safety with the old names. N2K_SUFFIX ?= "openslug" SRC_URI = "${N2K_SRCURI}" -SRC_URI += "${N2K_SRCFILES}" SRC_URI += "${N2K_PATCHES}" SRC_URI += "file://defconfig" @@ -235,27 +186,22 @@ EXTRA_OEMAKE += "EXTRAVERSION=" EXTRA_OEMAKE += "LOCALVERSION=" EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'" -# By putting the added files in place in a separate task before -# do_patch it becomes possible to patch these files. -do_unpacklocal() { - for f in ${N2K_FILES} - do - s="$(basename "$f")" - install -m 0644 "${WORKDIR}/$s" "${S}/$f" - done -} +# Override KERNEL_RELEASE from kernel.bbclass to match: +KERNEL_RELEASE = "${KERNEL_VERSION}" addtask unpacklocal before do_patch after do_unpack +# NOTE: in MM kernel builds the config options (oldconfig, menuconfig +# and so on) do not allow an option to be overridden, so the following +# removes the options which must be changed. do_configure_prepend() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config - if test '${ARCH_BYTE_SEX}' = le + rm -f ${S}/.config + echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config' + if test '${ARCH_BYTE_SEX}' = be then - sed -i '/CONFIG_CPU_BIG_ENDIAN/d' '${S}/.config' - else echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config' fi - echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config + sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' '${WORKDIR}/defconfig' >>'${S}/.config' rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \ ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch } @@ -310,5 +256,5 @@ python () { # Don't build the kernel unless we're targeting an nslu2 mach = bb.data.getVar("MACHINE", d, 1) if mach != 'nslu2': - raise bb.parse.SkipPackage("OpenSlug only builds for the Linksys NSLU2") + raise bb.parse.SkipPackage("nslu2-kernel only builds for the Linksys NSLU2") } diff --git a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch deleted file mode 100644 index 03d94d282c..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-copy-from.patch +++ /dev/null @@ -1,39 +0,0 @@ -# This patch fixes ixp4xx_copy_from for cases where the 'from' -# pointer is odd - that would cause all the accesses to be -# misaligned in the old code. ---- linux-2.6.12.2/.pc/ixp4xx_copy_from.patch/drivers/mtd/maps/ixp4xx.c 2005-09-21 22:35:38.761014739 -0700 -+++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-09-23 01:27:54.696223365 -0700 -@@ -54,19 +54,23 @@ - static void ixp4xx_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) - { -- int i; -- u8 *dest = (u8 *) to; -- u16 *src = (u16 *) (map->map_priv_1 + from); -- u16 data; -+ if (len <= 0) -+ return; - -- for (i = 0; i < (len / 2); i++) { -- data = src[i]; -- dest[i * 2] = BYTE0(data); -- dest[i * 2 + 1] = BYTE1(data); -+ u8 *dest = (u8 *) to; -+ u8 *src = (u8 *) (map->map_priv_1 + from); -+ if (from & 1) -+ *dest++ = BYTE1(*(u16 *)(src-1)), ++src, --len; -+ -+ while (len >= 2) { -+ u16 data = *(u16 *)src; src += 2; -+ *dest++ = BYTE0(data); -+ *dest++ = BYTE1(data); -+ len -= 2; - } - -- if (len & 1) -- dest[len - 1] = BYTE0(src[i]); -+ if (len > 0) -+ *dest++ = BYTE0(*(u16 *)src); - } - - /* diff --git a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch b/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch deleted file mode 100644 index 32f7e3ccb8..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/10-ixp4xx-regs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700 -@@ -52,7 +52,7 @@ - * Expansion BUS Configuration registers - */ - #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) --#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) -+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) - #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) - - /* diff --git a/packages/linux/nslu2-kernel/2.6.13/20-timer.patch b/packages/linux/nslu2-kernel/2.6.13/20-timer.patch deleted file mode 100644 index 356da6bb28..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/20-timer.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h ---- linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:42:45.000000000 +0200 -+++ nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:15:31.000000000 +0200 -@@ -9,7 +9,12 @@ - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. -+ * The NSLU2 has a 33.00MHz crystal, so a different FREQ is required. - */ -+#ifdef CONFIG_ARCH_NSLU2 -+#define FREQ 66000000 -+#else - #define FREQ 66666666 -+#endif - #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch b/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch deleted file mode 100644 index f05609f1e6..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/30-i2c-x1205.patch +++ /dev/null @@ -1,580 +0,0 @@ -diff -urN linux-2.6.13.1/drivers/i2c/chips/Kconfig nslu2-2.6.13.1/drivers/i2c/chips/Kconfig ---- linux-2.6.13.1/drivers/i2c/chips/Kconfig 2005-09-17 12:42:33.000000000 +0200 -+++ nslu2-2.6.13.1/drivers/i2c/chips/Kconfig 2005-09-17 13:46:42.000000000 +0200 -@@ -136,4 +136,14 @@ - This driver can also be built as a module. If so, the module - will be called max6875. - -+config SENSORS_X1205 -+ tristate "Xicor X1205 RTC chip" -+ depends on I2C && EXPERIMENTAL -+ select I2C_SENSOR -+ help -+ If you say yes here you get support for the Xicor x1205 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called x1205-rtc -+ - endmenu -diff -urN linux-2.6.13.1/drivers/i2c/chips/Makefile nslu2-2.6.13.1/drivers/i2c/chips/Makefile ---- linux-2.6.13.1/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200 -+++ nslu2-2.6.13.1/drivers/i2c/chips/Makefile 2005-09-17 13:35:39.000000000 +0200 -@@ -13,6 +13,7 @@ - obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o - obj-$(CONFIG_TPS65010) += tps65010.o -+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG -diff -urN linux-2.6.13.1/drivers/i2c/chips/x1205-rtc.c nslu2-2.6.13.1/drivers/i2c/chips/x1205-rtc.c ---- linux-2.6.13.1/drivers/i2c/chips/x1205-rtc.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/drivers/i2c/chips/x1205-rtc.c 2005-09-17 13:51:03.000000000 +0200 -@@ -0,0 +1,547 @@ -+/* -+ x1205 - an 12c driver for the Xicor X1205 RTC -+ Copyright 2004 Karen Spearel -+ -+ please send all reports to: -+ kas11 at tampabay dot rr dot com -+ -+ based on linux/drivers/acron/char/pcf8583.h -+ Copyright (C) 2000 Russell King -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+*/ -+/* -+ -+ * i2c_adapter is the structure used to identify a physical i2c bus along -+ * with the access algorithms necessary to access it. -+ -+struct i2c_adapter { -+ struct module *owner; -+ unsigned int id; == is algo->id | hwdep.struct->id, for registered values see below -+ unsigned int class; -+ struct i2c_algorithm *algo; the algorithm to access the bus -+ void *algo_data; -+ -+ --- administration stuff. -+ int (*client_register)(struct i2c_client *); -+ int (*client_unregister)(struct i2c_client *); -+ -+ data fields that are valid for all devices -+ struct semaphore bus_lock; -+ struct semaphore clist_lock; -+ -+ int timeout; -+ int retries; -+ struct device dev; the adapter device -+ struct class_device class_dev; the class device -+ -+#ifdef CONFIG_PROC_FS -+ No need to set this when you initialize the adapter -+ int inode; -+#endif def CONFIG_PROC_FS -+ -+ int nr; -+ struct list_head clients; -+ struct list_head list; -+ char name[I2C_NAME_SIZE]; -+ struct completion dev_released; -+ struct completion class_dev_released; -+}; -+*/ -+ -+ -+/*========== Driver for the X1205 on the Linksys NSLU2 ==================*/ -+ -+#include <linux/init.h> -+#include <linux/i2c.h> -+#include <linux/slab.h> -+#include <linux/string.h> -+#include <linux/errno.h> -+#include <linux/bcd.h> -+#include <linux/rtc.h> -+#include <linux/fs.h> -+#include <linux/proc_fs.h> -+#include <linux/miscdevice.h> -+#include <linux/device.h> -+#include <asm/uaccess.h> -+#include <asm/system.h> -+#include <linux/moduleparam.h> -+ -+#define RTC_GETDATETIME 0 -+#define RTC_SETTIME 1 -+#define RTC_SETDATETIME 2 -+ -+#define I2C_M_WR 0 // just for consistancy -+ -+// offsets into read buf - add 2 for write buf -+#define CCR_SEC 0 -+#define CCR_MIN 1 -+#define CCR_HOUR 2 -+#define CCR_MDAY 3 -+#define CCR_MONTH 4 -+#define CCR_YEAR 5 -+#define CCR_WDAY 6 -+#define CCR_Y2K 7 -+ -+#define X1205_I2C_BUS_ADDR 0x6f // hardwired into x1205 -+#define X1205_ALM0_BASE 0x00 // Base address of the ALM0 -+#define X1205_CCR_BASE 0x30 // Base address of the CCR -+#define X1205_SR_ADDR 0x3f // Status Register -+#define X1205_SR_WEL 0x02 // Write Enable Latch bit -+#define X1205_SR_RWEL 0x04 // Register Write Enable Bit -+#define X1205_MILBIT 0x80 // this bit set in ccr.hour for 24 hr mode -+#define NOERR 0 -+#define RTC_NODATE 0 -+#define RTC_DATETOO 1 -+ -+// comment out next line is your x1205 can't do page writes -+//#define X1205PAGEWRITE 1 -+#ifdef X1205PAGEWRITE -+#define DRIVERNAME "Xicor x1205 RTC Driver v0.9.3.3" -+#else -+#define DRIVERNAME "Xicor x1205 RTC Dvr v0.9.3.3NPW" -+#endif -+ -+#define DEBUG KERN_DEBUG -+ -+ -+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base); -+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base); -+static int x1205_attach(struct i2c_adapter *adapter); -+static int x1205_detach(struct i2c_client *client); -+static int x1205_validate_tm(struct rtc_time *tm); -+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); -+static int x1205_sync_rtc(void); -+static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr); -+static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -+static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data); -+ -+static struct i2c_driver x1205_driver = { -+ .owner = THIS_MODULE, -+ .name = DRIVERNAME, -+ .id = I2C_DRIVERID_EXP0, -+ .flags = I2C_DF_NOTIFY, -+ .attach_adapter = &x1205_attach, //we don't need to probe...x1205 is hardwired @ 0x6f -+ .detach_client = &x1205_detach, -+ .command = &x1205_command, //this prolly never gets called...used internally tho -+}; -+ -+static struct i2c_client x1205_i2c_client = { -+ .flags = 0, -+ .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit -+ .adapter = NULL, // the adapter we sit on assigned in attach -+ .driver = &x1205_driver, // and our access routines -+ .usage_count = 0, // How many accesses currently to this client -+ .dev = {}, // the device structure -+ .list = {}, -+ .name = DRIVERNAME, -+ .released = {}, -+}; -+ -+static struct file_operations rtc_fops = { -+ owner: THIS_MODULE, -+ ioctl: x1205_ioctl, -+ read: x1205_read, -+}; -+ -+static struct miscdevice x1205_miscdev = { -+ .minor = RTC_MINOR, -+ .name = "rtc", -+ .fops = &rtc_fops, -+}; -+extern int (*set_rtc)(void); -+static unsigned epoch = 1900; //coresponds to year 0 -+static unsigned rtc_epoch = 2000; -+static const unsigned char days_in_mo[] = -+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; -+ -+//===================================CODE====================================== -+// in the routines that deal directly with the x1205 hardware, we use -+// rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch -+// Epoch is inited as 2000. Time is set to UT -+//============================================================================= -+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base) -+{ -+ static unsigned char addr[2] = { 0,} ; -+ unsigned char buf[8]; -+ struct i2c_msg msgs[2] = { -+ { client->addr, I2C_M_WR, 2, addr }, //msg 1 = send base address -+ { client->addr, I2C_M_RD, 8, buf }, //msg 2 = read sequential data -+ }; -+ addr[1] = reg_base; -+ if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { //did we read 2 messages? -+ printk(KERN_DEBUG "raw x1205 read data - sec-%02x min-%02x hr-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", -+ buf[0],buf[1],buf[2],buf[3],buf[4],buf[5],buf[6], buf[7]); -+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); -+ tm->tm_min = BCD2BIN(buf[CCR_MIN]); -+ buf[CCR_HOUR] &= ~X1205_MILBIT; -+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); //hr is 0-23 -+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); -+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); -+ rtc_epoch = BCD2BIN(buf[CCR_Y2K]) * 100; -+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + rtc_epoch - epoch; -+ tm->tm_wday = buf[CCR_WDAY]; -+ printk(KERN_DEBUG "rtc_time output data - sec-%02d min-%02d hr-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", -+ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday,epoch, rtc_epoch); -+ } else { -+ printk(KERN_DEBUG "i2c_transfer Read Error\n"); -+ return -EIO; -+ } -+ -+ return NOERR; -+} -+// x1205pagewrite allows writing a block of registers in msg3 even though the x1205 says -+// nothing about this in its spec. -+// it needs more testing as it is possible some x1205s are actually not-completely- -+// functional x1226s and there is a reason for the multiple write to not be in the spec. -+// anyhow, it is enabled for the time being...and we even push out luck by sending 10 bytes -+ -+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base) -+{ -+ static unsigned char wel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL }; -+ static unsigned char rwel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL | X1205_SR_RWEL }; -+ static unsigned char diswe[3] = { 0, X1205_SR_ADDR, 0 }; -+ -+#ifdef X1205PAGEWRITE -+ -+ static unsigned char buf[10] = { 0, X1205_CCR_BASE, }; -+ struct i2c_msg msgs[4] = { -+ { client->addr, I2C_M_WR, 3, wel }, //msg 1 = write WEL to to ccr sr -+ { client->addr, I2C_M_WR, 3, rwel }, //msg 2 = write RWEL to ccr sr -+ { client->addr, I2C_M_WR, 10, buf }, //msg 3 = write ccr base addr +seq data -+ { client->addr, I2C_M_WR, 3, diswe }, //msg 4 = 0 to ccr sr to disable writes -+ }; -+ -+ msgs[2].len = 5; // 5 bytes + addr to set time only -+ buf [1] = reg_base; -+ buf[CCR_SEC+2] = BIN2BCD(tm->tm_sec); -+ buf[CCR_MIN+2] = BIN2BCD(tm->tm_min); -+ buf[CCR_HOUR+2] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format -+ if (datetoo == 1) { -+ buf[CCR_MDAY+2] = BIN2BCD(tm->tm_mday); -+ buf[CCR_MONTH+2] = BIN2BCD(tm->tm_mon); // input is 0-11 -+ buf[CCR_YEAR+2] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 -+ buf[CCR_WDAY+2] = tm->tm_wday & 7; -+ buf[CCR_Y2K+2] = BIN2BCD((rtc_epoch/100)); -+ msgs[2].len += 5; //5 more bytes to set date -+ } -+ printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", -+ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); -+ printk(KERN_DEBUG "BCD write data - sec-%02x min-%02x hour-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", -+ buf[2],buf[3],buf[4],buf[5],buf[6], buf[7], buf[8], buf[9]); -+ -+ if ((i2c_transfer(client->adapter, msgs, 4)) != 4) -+ return -EIO; -+ return NOERR; -+ -+#else //do this if page writes aren't working -+ -+ int i,xfer; -+ static unsigned char data[3] = { 0,}; -+ static unsigned char buf[8]; -+ -+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); -+ buf[CCR_MIN] = BIN2BCD(tm->tm_min); -+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format -+ if (datetoo == 1) { -+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); -+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); // input is 0-11 -+ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 -+ buf[CCR_WDAY] = tm->tm_wday & 7; -+ buf[CCR_Y2K] = BIN2BCD((rtc_epoch/100)); -+ } -+ printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", -+ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); -+ -+ xfer = i2c_master_send(client, wel, 3); -+ printk(KERN_DEBUG "wen - %x\n", xfer); -+ if (xfer != 3) -+ return -EIO; -+ -+ xfer = i2c_master_send(client, rwel, 3); -+ printk(KERN_DEBUG "wenb - %x\n", xfer); -+ if (xfer != 3) -+ return -EIO; -+ -+ for (i = 0; i < 8; i++) { -+ data[1] = i + reg_base; -+ data[2] = buf[i]; -+ xfer = i2c_master_send(client, data, 3); -+ printk(KERN_DEBUG "xfer - %d addr - %02x data - %02x\n", xfer, data[1], data[2]); -+ if (xfer != 3) -+ return -EIO; -+ }; -+ -+ xfer = i2c_master_send(client, diswe, 3); -+ printk(KERN_DEBUG "wdis - %x\n", xfer); -+ if (xfer != 3) -+ return -EIO; -+ return NOERR; -+#endif -+} -+//============================================================================= -+ -+static int x1205_attach(struct i2c_adapter *adapter) -+{ -+ struct rtc_time tm; -+ struct timespec tv; -+ int errno; -+ -+ x1205_i2c_client.adapter = adapter; -+// x1205_i2c_client.id++; -+ -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver -+ return -EIO; -+ -+ if ((errno = i2c_attach_client(&x1205_i2c_client)) != NOERR) -+ return errno; -+ -+ tv.tv_nsec = tm.tm_sec * 10000000; -+ tv.tv_sec = mktime(tm.tm_year+epoch, tm.tm_mon, tm.tm_mday, tm.tm_hour, -+ tm.tm_min, tm.tm_sec); -+ do_settimeofday(&tv); -+ set_rtc = x1205_sync_rtc; -+ -+ printk(KERN_DEBUG "%s attached on adapter %s\n",x1205_i2c_client.name, -+ x1205_i2c_client.adapter->name); //why is this name a null string? -+ -+ return NOERR; -+} -+ -+static int x1205_detach(struct i2c_client *client) -+{ -+ int errno; -+ -+ if ((errno = i2c_detach_client(client)) != 0) { -+ printk(KERN_DEBUG "i2c_detach failed - errno = %d\n", errno); -+ return errno; -+ } -+ -+ return NOERR; -+} -+ -+// make sure the rtc_time values are in bounds -+static int x1205_validate_tm(struct rtc_time *tm) -+{ -+ tm->tm_year += 1900; -+ -+ if (tm->tm_year < 1970) -+ return -EINVAL; -+ -+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) -+ return -EINVAL; -+ -+ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && -+ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) -+ return -EINVAL; -+ -+ if ((tm->tm_year -= epoch) > 255) -+ return -EINVAL; -+ -+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) -+ return -EINVAL; -+ return NOERR; -+} -+ -+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) -+{ -+ int errno, dodate = RTC_DATETOO; -+ -+ if (client == NULL || tm == NULL) -+ return -EINVAL; -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ printk(KERN_DEBUG "x1205_command %d\n", cmd); -+ -+ switch (cmd) { -+ case RTC_GETDATETIME: -+ return x1205_get_datetime(client, tm, X1205_CCR_BASE); -+ -+ case RTC_SETTIME: // note fall thru -+ dodate = RTC_NODATE; -+ case RTC_SETDATETIME: -+ if ((errno = x1205_validate_tm(tm)) < NOERR) -+ return errno; -+ return x1205_set_datetime(client, tm, dodate, X1205_CCR_BASE); -+ -+ default: -+ return -EINVAL; -+ } -+} -+ -+static int x1205_sync_rtc(void) -+{ -+ struct rtc_time new_tm, old_tm; -+ unsigned long cur_secs = xtime.tv_sec; -+ -+ printk(KERN_DEBUG "x1205_sync_rtc entry\n"); -+ -+ if (x1205_command(&x1205_i2c_client, RTC_GETDATETIME, &old_tm)) -+ return 0; -+ -+// xtime.tv_nsec = old_tm.tm_sec * 10000000; //FIXME: -+ new_tm.tm_sec = cur_secs % 60; -+ cur_secs /= 60; -+ new_tm.tm_min = cur_secs % 60; -+ cur_secs /= 60; -+ new_tm.tm_hour = cur_secs % 24; -+ -+ /* -+ * avoid writing when we're going to change the day -+ * of the month. We will retry in the next minute. -+ * This basically means that if the RTC must not drift -+ * by more than 1 minute in 11 minutes. -+ */ -+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || -+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) -+ return 1; -+ printk(KERN_DEBUG "x1205_sync_rtc exit\n"); -+ -+ return x1205_command(&x1205_i2c_client, RTC_SETTIME, &new_tm); -+} -+ -+static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr) -+{ -+ struct rtc_time tm; -+ -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) -+ return -EIO; -+ return copy_to_user(buf, &tm, sizeof(tm)) ? -EFAULT : NOERR; -+} -+ -+//============================================================================== -+ -+static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct rtc_time tm; -+ int errno; -+ -+ printk(KERN_DEBUG "ioctl = %x\n", cmd); -+ -+ switch (cmd) { -+ case RTC_RD_TIME: -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) -+ return -EIO; -+ break; -+ -+ case RTC_SET_TIME: -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) -+ return -EFAULT; -+ if ((errno = x1205_validate_tm(&tm)) < NOERR) -+ return errno; -+ return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_CCR_BASE); -+ -+ case RTC_ALM_SET: //FIXME: set Control Regs -+ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) -+ return -EFAULT; -+ return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_ALM0_BASE); -+ -+ case RTC_ALM_READ: -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_ALM0_BASE)) < NOERR) -+ return -EIO; -+ break; -+ -+ case RTC_EPOCH_READ: -+ -+ return put_user (epoch, (unsigned long __user *)arg); -+ -+ case RTC_EPOCH_SET: -+ if (arg < 1900) -+ return -EINVAL; -+ -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ epoch = arg; -+ return 0; -+ -+ default: -+ return -ENOTTY; -+ } -+ return copy_to_user((void __user *)arg, &tm, sizeof tm) ? -EFAULT : 0; -+ -+} -+ -+static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) -+{ -+ struct rtc_time tm; -+ int slen, errno; -+ -+ if ((errno = x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) -+ return errno; -+ -+// here we return the real year and the month as 1-12 since it is human-readable -+ slen = sprintf(buf, "rtc_time\t: %02d:%02d:%02d\nrtc_date\t: %04d-%02d-%02d\n", -+ tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year + 1900, tm.tm_mon+1, tm.tm_mday); -+ printk(KERN_DEBUG "raw rtc_time\t: %02d:%02d:%02d\nraw rtc_date\t: %04d-%02d-%02d\n", -+ tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon, tm.tm_mday); -+ -+ if (slen <= off + len) -+ *eof = 1; -+ *start = buf + off; -+ slen -= off; -+ if (slen > len) -+ slen = len; -+ if ( slen < 0 ) -+ slen = 0; -+ -+ return slen; -+} -+ -+static int __init x1205_init(void) -+{ -+ struct rtc_time tm; -+ int errno; -+ printk(KERN_INFO "LOADED %s\n", DRIVERNAME); -+ -+ if ((errno = i2c_add_driver(&x1205_driver)) != NOERR) { -+ dev_dbg(x1205_i2c_client.dev, "x1205_init failed - errno = %d\n", errno); -+ return (errno); -+ } -+ if ((errno = misc_register(&x1205_miscdev)) != NOERR) { -+ dev_dbg(x1205_i2c_client.dev, "Register Misc Driver failed - errno = %d\n", errno); -+ i2c_del_driver(&x1205_driver); -+ return errno; -+ } -+ if (create_proc_read_entry("driver/rtc", 0, NULL, x1205_read_proc, NULL) < NOERR) -+ return -ENOMEM; -+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functionality -+ return -EIO; -+ -+ return NOERR; -+} -+ -+static void __exit x1205_exit(void) -+{ -+ remove_proc_entry("driver/rtc", NULL); -+ misc_deregister(&x1205_miscdev); -+ i2c_del_driver(&x1205_driver); -+ set_rtc = NULL; -+} -+ -+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -+MODULE_DESCRIPTION("Xicor X1205-RTC Driver"); -+MODULE_LICENSE("GPL"); -+static int debug = 7; -+module_param(debug, bool, 0644); -+MODULE_PARM_DESC(debug, "Debugging enabled = 1"); -+ -+module_init(x1205_init); -+module_exit(x1205_exit); diff --git a/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch b/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch deleted file mode 100644 index e7cce4ebc0..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/40-mtd-shutdown.patch +++ /dev/null @@ -1,66 +0,0 @@ -# Ensure that the MTD is shut down on halt/reboot, otherwise the -# hardware reset hangs - ---- linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c.orig 2005-07-17 15:07:47.790388300 -0700 -+++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-07-17 17:00:08.082672710 -0700 -@@ -144,6 +144,52 @@ - return 0; - } - -+static void ixp4xx_flash_shutdown(struct device *_dev) -+{ -+ struct platform_device *dev = to_platform_device(_dev); -+ struct flash_platform_data *plat = dev->dev.platform_data; -+ struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev); -+ map_word d; -+ -+ dev_set_drvdata(&dev->dev, NULL); -+ -+ if(!info) -+ return; -+ -+ /* -+ * This is required for a soft reboot to work. -+ */ -+ d.x[0] = 0xff; -+ ixp4xx_write16(&info->map, d, 0x55 * 0x2); -+ -+#if 0 -+ /* This is commented out because it seems to cause a kernel -+ * panic (at least if it isn't commented out the kernel fails -+ * to shut down). Should be investigated. -+ */ -+ if (info->mtd) { -+ del_mtd_partitions(info->mtd); -+ map_destroy(info->mtd); -+ } -+#endif -+ if (info->map.map_priv_1) -+ iounmap((void *) info->map.map_priv_1); -+ -+ if (info->partitions) -+ kfree(info->partitions); -+ -+ if (info->res) { -+ release_resource(info->res); -+ kfree(info->res); -+ } -+ -+ if (plat->exit) -+ plat->exit(); -+ -+ /* Disable flash write */ -+ *IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE; -+} -+ - static int ixp4xx_flash_probe(struct device *_dev) - { - struct platform_device *dev = to_platform_device(_dev); -@@ -243,6 +289,7 @@ - .bus = &platform_bus_type, - .probe = ixp4xx_flash_probe, - .remove = ixp4xx_flash_remove, -+ .shutdown = ixp4xx_flash_shutdown, - }; - - static int __init ixp4xx_flash_init(void) diff --git a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch deleted file mode 100644 index f49ea7f1c3..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-arch.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700 -+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700 -@@ -37,6 +37,7 @@ - defined(CONFIG_ARCH_INTEGRATOR) || \ - defined(CONFIG_ARCH_PXA) || \ - defined(CONFIG_ARCH_IXP4XX) || \ -+ defined(CONFIG_ARCH_NSLU2) || \ - defined(CONFIG_ARCH_IXP2000) || \ - defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) ---- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800 -+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700 -@@ -47,3 +47,8 @@ - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) - #endif - -+#ifdef CONFIG_ARCH_NSLU2 -+ mov r7, #(MACH_TYPE_NSLU2 & 0xff) -+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) -+#endif -+ ---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700 -+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700 -@@ -43,6 +43,12 @@ - IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see <file:Documentation/arm/IXP4xx>. - -+config ARCH_NSLU2 -+ bool "NSLU2" -+ help -+ Say 'Y' here if you want your kernel to support Linksys's -+ NSLU2 NAS device. For more information on this platform, -+ see http://www.nslu2-linux.org - - # - # IXCDP1100 is the exact same HW as IXDP425, but with a different machine ---- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700 -+++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700 -@@ -604,7 +604,7 @@ - roverp7 MACH_ROVERP7 ROVERP7 594 - pr818s MACH_PR818S PR818S 595 - trxpro MACH_TRXPRO TRXPRO 596 --nslu2 MACH_NSLU2 NSLU2 597 -+nslu2 ARCH_NSLU2 NSLU2 597 - e400 MACH_E400 E400 598 - trab MACH_TRAB TRAB 599 - cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 ---- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800 -+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700 -@@ -94,7 +94,11 @@ - struct resource *res; - }; - -+#ifdef CONFIG_ARCH_NSLU2 -+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; -+#else - static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -+#endif - - static int ixp4xx_flash_remove(struct device *_dev) - { ---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700 -@@ -44,5 +44,6 @@ - #include "ixdp425.h" - #include "coyote.h" - #include "prpmc1100.h" -+#include "nslu2.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ ---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700 -@@ -93,4 +93,11 @@ - #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 - #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -+/* -+ * NSLU2 board IRQs -+ */ -+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 -+ - #endif diff --git a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch deleted file mode 100644 index c69e69c53e..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-include.patch +++ /dev/null @@ -1,47 +0,0 @@ -diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h ---- linux-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h 2005-09-16 18:58:05.000000000 +0200 -@@ -0,0 +1,43 @@ -+/* -+ * include/asm-arm/arch-ixp4xx/nslu2.h -+ * -+ * NSLU2 platform specific definitions -+ * -+ * Author: Mark Rakes <mrakes AT mac.com> -+ * Maintainers: http://www.nslu2-linux.org -+ * -+ * based on ixdp425.h: -+ * Copyright 2004 (c) MontaVista, Software, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -+// kas11 11-2-04 -+ -+#ifndef __ASM_ARCH_HARDWARE_H__ -+#error "Do not include this directly, instead #include <asm/hardware.h>" -+#endif -+ -+#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -+#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE -+ -+#define NSLU2_SDA_PIN 7 -+#define NSLU2_SCL_PIN 6 -+ -+/* -+ * NSLU2 PCI IRQs -+ */ -+#define NSLU2_PCI_MAX_DEV 3 -+#define NSLU2_PCI_IRQ_LINES 3 -+ -+ -+/* PCI controller GPIO to IRQ pin mappings */ -+#define NSLU2_PCI_INTA_PIN 11 -+#define NSLU2_PCI_INTB_PIN 10 -+#define NSLU2_PCI_INTC_PIN 9 -+//#define NSLU2_PCI_INTD_PIN 8 -+ -+ diff --git a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch b/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch deleted file mode 100644 index f38c0c8b3e..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/50-nslu2-setup.patch +++ /dev/null @@ -1,1156 +0,0 @@ -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/Makefile nslu2-2.6.13.1/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:42:02.000000000 +0200 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:44:11.000000000 +0200 -@@ -8,4 +8,5 @@ - obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o - obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o -+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o - -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c 2005-09-17 00:12:18.000000000 +0200 -@@ -0,0 +1,777 @@ -+//============================================================================= -+// -+// n2-io.c version 0.1.7 -+// Author: Karen Spearel <kas11 at tampabay.rr.com> -+// please report problems/bugs directly to the address above -+// -+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per -+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk -+// -+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, -+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT -+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER -+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. -+// -+//============================================================================= -+// GPIO Function State -+// 0 Red LED Status -+// 1 Green LED Ready = 1 -+// 2 Disk 2 LED On = 0 -+// 3 Disk 1 LED On = 0 -+// 4 Buzzer -+// 5 Power Button Pressed = 1 -+// 8 Power Down Output = 1 powers down N2 -+// 12 Reset Pressed = 0 -+//============================================================================= -+// this driver is N2 specific and is purposely designed to do the minimum -+// necessary to provide the necessary services given the limited memory resources -+// of the N2. As OpenN2 develops, addition features will be added as -+// suggested by the community. -+// -+//============================================================================= -+ -+#include <linux/config.h> -+#include <linux/version.h> -+#include <linux/module.h> -+#include <linux/utsname.h> -+#include <linux/kernel.h> -+#include <linux/major.h> -+#include <linux/string.h> -+#include <linux/proc_fs.h> -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/errno.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/device.h> -+#include <linux/interrupt.h> -+#include <linux/moduleparam.h> -+#include <linux/timer.h> -+#include <linux/reboot.h> -+ -+#include <asm/system.h> -+#include <asm/uaccess.h> -+#include <asm/hardware.h> -+#include <asm-arm/irq.h> -+#include <asm-arm/delay.h> -+#include <asm-arm/signal.h> -+ -+/* Set this to 1 to output lots of debug messages. */ -+#if NSLU2_IO_DEBUG -+#define nslu2_io_debug(args) printk args -+#else -+#define nslu2_io_debug(args) ((void)0) -+#endif -+ -+#define VERSION "0.1.7" -+ -+#define N2RB_MAJOR 60 //rbuttons -+#define N2PB_MAJOR 61 //pbuttons -+#define N2BZ_MAJOR 62 //buzzer -+#define N2LM_MAJOR 126 -+ -+#define N2PB_IRQ 22 //gpio5 -+#define N2RB_IRQ 29 //gpio12 -+ -+#define N2_BEEP_DUR_LONG 2000 -+#define N2_BEEP_DUR_MED 400 -+#define N2_BEEP_DUR_SHORT 100 -+#define N2_BEEP_PITCH_HIGH 250 -+#define N2_BEEP_PITCH_MED 500 -+#define N2_BEEP_PITCH_LOW 1000 -+#define N2_LONG_DELAY 30000 -+ -+#define N2_BZ_GPIO 4 -+#define N2_PB_GPIO 5 -+#define N2_PO_GPIO 8 //power off -+#define N2_RB_GPIO 12 -+ -+#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 -+#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 -+#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -+#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 -+ -+#define NOERR 0 -+ -+#define RB_DELAY 50 -+#define PB_DELAY 20 -+ -+#define PWR_OFF_STR "poweroff" -+ -+ -+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe -+ -+#define N2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible -+#define N2BZ_BEEP _IO('M',1) //one beep at current defaults -+#define N2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults -+#define N2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 -+#define N2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies -+#define N2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies -+#define N2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever -+#define N2BZ_COMBINED _IOW('M',8,long) //combine all params in a long -+ -+#define N2LM_OFF _IOW('M',32,long) -+#define N2LM_ON _IOW('M',33,long) -+#define N2LM_BLINK _IOW('M',34,long) -+#define N2LM_ALT _IOW('M',35,long) -+#define N2LM_ALL_ON _IO('M',36) -+#define N2LM_ALL_OFF _IO('M',37) -+ -+#define PHYS_LEDS 4 -+#define BLINK_DELAY 25 -+ -+// OR Masks to turn these LEDs ON -+ -+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 -+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 -+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 -+ -+// AND Masks to turn these LEDs OFF -+ -+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 -+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 -+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 -+ -+// AND Masks to turn these LEDs ON -+ -+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 -+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 -+ -+// Or Masks to turn these LEDs OFF -+ -+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 -+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 -+ -+// EOR masks for toggling LEDs on/off -+ -+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits -+#define RS_GRN_TGL 0x00000002 -+#define RS_RED_TGL 0x00000001 -+#define DISK1_TGL 0x00000008 -+#define DISK2_TGL 0x00000004 -+ -+// The LED names for switches -+ -+#define LED_RS_RED 0 -+#define LED_RS_GRN 1 -+#define LED_DISK1 2 -+#define LED_DISK2 3 -+#define LED_ALL 4 -+ -+static unsigned long init_jiffy = 0; //jiffies at init time -+static unsigned long rb_presses = 0; //number of reset button presses -+static unsigned long ontime = 50; -+static unsigned long offtime = 450; -+static unsigned long bz_repeatcnt = 10; -+static unsigned long tone = 1000; -+ -+DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); -+DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); -+ -+static struct timer_list n2lm_rsg_timer; //rs green -+static struct timer_list n2lm_rsr_timer; //rs red -+static struct timer_list n2lm_d1_timer; //drive 1 -+static struct timer_list n2lm_d2_timer; //drive 2 -+static struct timer_list n2rb_timer; -+static struct timer_list n2pb_timer; -+static struct timer_list n2bz_timer; //beeper -+ -+// sysfs class -+static struct class *n2lm_class; -+ -+//================================================================================================== -+// -+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the -+// GPIO output register is xor'd with a mask corresponding to the selected led which simply -+// flips that bit. No record of what any of the other leds is doing is needed. -+// -+//================================================================================================== -+// this blinks rs green or green/yellow if rs red is on -+static void n2lm_rsg_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led -+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout -+ add_timer(&n2lm_rsg_timer); //reinit timer -+ return; -+} -+ -+// this blinks or alternates rs red green... inited wit green on/red off -+static void n2lm_rsr_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; -+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_rsr_timer); -+ return; -+} -+// blinks disk 1 -+static void n2lm_d1_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; -+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d1_timer); -+ return; -+} -+// blinks disk 2 -+static void n2lm_d2_handler(unsigned long data) -+{ -+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; -+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d2_timer); -+ return; -+} -+ -+//================================================================================================== -+ -+static void n2lm_timer_start(unsigned long led) -+{ -+ -+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); -+ -+ switch(led) { -+ case LED_RS_RED: -+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_rsr_timer); -+ break; -+ -+ case LED_RS_GRN: -+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_rsg_timer); -+ break; -+ -+ case LED_DISK1: -+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d1_timer); -+ break; -+ -+ case LED_DISK2: -+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; -+ add_timer(&n2lm_d2_timer); -+ break; -+ -+ default: -+ break; -+ } -+ return; -+} -+ -+//================================================================================================== -+ -+static void n2lm_timer_stop(unsigned long led) -+{ -+ switch (led) { -+ case LED_RS_RED: -+ del_timer(&n2lm_rsr_timer); -+ break; -+ case LED_RS_GRN: -+ del_timer(&n2lm_rsg_timer); -+ break; -+ case LED_DISK1: -+ del_timer(&n2lm_d1_timer); -+ break; -+ case LED_DISK2: -+ del_timer(&n2lm_d2_timer); -+ break; -+ default: -+ break; -+ } -+ return; -+} -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static void n2lm_timer_stop_all(void) -+{ -+ del_timer(&n2lm_rsg_timer); -+ del_timer(&n2lm_rsr_timer); -+ del_timer(&n2lm_d1_timer); -+ del_timer(&n2lm_d2_timer); -+ return; -+} -+//-------------------------------------------------------------------------------------------------- -+ -+static void n2lm_ledon(unsigned long led) -+{ -+ -+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); -+ -+ switch (led) { -+ case LED_RS_RED: -+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 -+ return; -+ case LED_RS_GRN: -+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 -+ return; -+ case LED_DISK1: -+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 -+ return; -+ case LED_DISK2: -+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb -+ return; -+ case LED_ALL: //all green -+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; -+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); -+ return; -+ } -+} -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static void n2lm_ledoff(unsigned long led) -+{ -+ -+ switch (led) { -+ case LED_RS_RED: -+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe -+ return; -+ case LED_RS_GRN: -+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd -+ return; -+ case LED_DISK1: -+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 -+ return; -+ case LED_DISK2: -+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 -+ return; -+ case LED_ALL: -+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); -+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); -+ } -+} -+ -+//================================================================================================== -+ -+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) -+{ -+ -+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); -+ -+ if (led < 0 || led >= PHYS_LEDS) -+ return -EINVAL; -+ -+ switch (cmd ) { -+ case N2LM_ON: -+ n2lm_timer_stop(led); -+ n2lm_ledon(led); -+ break; -+ -+ case N2LM_OFF: -+ n2lm_timer_stop(led); -+ n2lm_ledoff(led); -+ break; -+ -+ case N2LM_BLINK: -+ n2lm_ledon(led); -+ if (led == LED_RS_RED) -+ n2lm_rsr_timer.data = RS_RED_TGL; -+ n2lm_timer_start(led); -+ break; -+ -+ case N2LM_ALT: -+ if (led == LED_RS_RED) -+ { -+ n2lm_ledon(LED_RS_GRN); -+ n2lm_ledoff(LED_RS_RED); -+ n2lm_rsr_timer.data = RS_RG_ALT; -+ n2lm_timer_start(LED_RS_RED); -+ break; -+ } else -+ return -EINVAL; -+ -+ case N2LM_ALL_ON: -+ n2lm_timer_stop_all(); -+ n2lm_ledon(LED_ALL); -+ break; -+ -+ case N2LM_ALL_OFF: -+ n2lm_timer_stop_all(); -+ n2lm_ledoff(LED_ALL); -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ return NOERR; -+} -+ -+static struct file_operations n2lm_fops = { -+ .owner = THIS_MODULE, -+ .ioctl = n2lm_ioctl, -+}; -+//================================================================================================== -+// We can't do anything fancy here since the system tick rate is far below that required to -+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until -+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing -+// important should be haprepening. -+//================================================================================================== -+ -+static void n2_buzz(int tone_delay, int duration) -+{ -+ int i; -+ -+ *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; -+ -+ for (i = 1; i < duration; i++) { -+ *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; -+ udelay(tone_delay); -+ *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; -+ udelay(tone_delay); -+ } -+ *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; -+ -+ return; -+} -+//================================================================================================= -+ -+// this handles the buzzer duty cycle -+static void n2bz_handler(unsigned long data) -+{ -+ if (--bz_repeatcnt > 0) { //if just one beep left to do -+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout -+ add_timer(&n2bz_timer); //reinit timer -+ } -+ n2_buzz(tone/2, ontime); -+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); -+ return; -+} -+ -+//================================================================================================== -+ -+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) -+{ -+ switch (cmd) { -+ case N2BZ_BEEP: -+ n2_buzz(tone/2, ontime); -+ break; -+ -+ case N2BZ_BEEP_STOP: -+ del_timer(&n2bz_timer); -+ break; -+ -+ case N2BZ_BEEPS: -+ if (param == 0) -+ bz_repeatcnt = 0xffffffff; -+ else -+ bz_repeatcnt = param; -+ n2bz_handler(0); -+ break; -+ -+ case N2BZ_TONESET: -+ if (param >= 250 && param <= 2000) -+ tone = param; -+ break; -+ -+ case N2BZ_ONTIME: -+ if (param > 4 && param < 201) -+ ontime = param; -+ break; -+ -+ case N2BZ_SILENTTIME: -+ if (param > ontime) //enforce a reasonable duty cycle -+ offtime = param; -+ else -+ offtime = ontime; -+ break; -+ -+ case N2BZ_REPEATCNT: -+ if (param == 0) -+ bz_repeatcnt = 0xffffffff; -+ else -+ bz_repeatcnt = param; -+ break; -+ -+ case N2BZ_COMBINED: -+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 -+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies -+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies -+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 -+ break; -+ -+ default: -+ break; -+ } -+ return NOERR; -+} -+ -+static struct file_operations n2bz_fops = { -+ .owner = THIS_MODULE, -+ .ioctl = n2bz_ioctl, -+}; -+ -+//================================================================================================== -+ -+static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) -+{ -+ void *ret; -+ -+ wake_up(&n2pb_waitq); -+ remove_proc_entry(PWR_OFF_STR, NULL); //no parent -+ n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); -+ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); -+ nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); -+ -+// WARNING: This is RUDE...it unconditionally pulls the power plug. -+// Your data will be at risk...since this is just a test system -+// I am leaving it enabled...eventually userland needs to get the -+// message, do an orderly shutdown and use an ioctl or something in -+// /proc/powerdowm to actually have us pull the plug. -+ -+ machine_power_off(); -+ -+ return IRQ_HANDLED; -+} -+ -+//================================================================================================== -+// -+//static void do_rb_timeout(unsigned long data) -+//{ -+// int i; -+// -+// for (i = 0; i < rb_presses; i++) -+// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); -+// return; -+//} -+// -+//================================================================================================== -+// does nothing -- waiting for userland to define -+// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so -+// we hang in a loop until the button is no longer pressed -+ -+struct testr { -+ int ctl; -+ long param; -+}; -+ -+static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) -+{ -+ -+ static struct testr test[] = { -+ { N2LM_ALL_OFF,0 }, -+ { N2LM_ON,0 }, -+ { N2LM_OFF,0 }, -+ { N2LM_ON,1 }, -+ { N2LM_ALL_OFF,1 }, -+ { N2LM_ON,2 }, -+ { N2LM_OFF,2 }, -+ { N2LM_ON,3 }, -+ { N2LM_OFF,3 }, -+ { N2LM_BLINK,0 }, -+ { N2LM_OFF,0 }, -+ { N2LM_BLINK,1 }, -+ { N2LM_OFF,1 }, -+ { N2LM_BLINK,2 }, -+ { N2LM_OFF,2 }, -+ { N2LM_BLINK,3 }, -+ { N2LM_OFF,3 }, -+ { N2LM_ALL_OFF,0 }, -+ { N2LM_ALT,1 }, -+ { N2LM_OFF,1 }, -+ { N2LM_ALL_ON,0 } -+ }; -+ -+ nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); -+ -+ wake_up(&n2rb_waitq); -+ while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) -+ ; //wait for button release -+ -+ if (rb_presses > 20) -+ rb_presses = 0; -+ tone = (rb_presses * 50) + 200; -+ ontime = (rb_presses*10) + 100; -+ offtime = 500 - (rb_presses*20); -+ nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); -+ rb_presses++; -+ -+ n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); -+ n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); -+// if (rb_presses == 0) { -+// init_jiffy = jiffies; -+// init_timer (&n2rb_timer); -+// n2rb_timer.function = do_rb_timeout; -+// }; -+// -+// if (rb_presses == 8) -+// rb_presses = 0; -+// if (rb_presses & 1) -+// n2lm_ledon(test[rb_presses]); -+// else -+// n2lm_ledoff(test[rb_presses]); -+// -+// n2rb_timer.expires = (jiffies + RB_DELAY); -+// add_timer (&n2rb_timer); -+// if (rb_presses < 5) { -+// if (rb_presses > 0) -+// n2lm_ledoff(rb_presses); -+// n2lm_ledon(++rb_presses); -+// n2lm_timer_start(rb_presses); -+// }; -+ -+ nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); -+ return IRQ_HANDLED; -+ -+} -+ -+//================================================================================================== -+// What to do here is majorly undetermined... -+ -+static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ printk(KERN_DEBUG "Reset Button Wait\n"); -+ interruptible_sleep_on(&n2rb_waitq); -+ return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; -+ -+} -+ -+//================================================================================================== -+// What to do here is majorly undetermined... -+ -+static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ printk(KERN_DEBUG "Power Button Wait\n"); -+ interruptible_sleep_on(&n2pb_waitq); -+ return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; -+ -+} -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static struct file_operations n2rb_fops = { -+ .owner = THIS_MODULE, -+ .read = n2rb_read, -+}; -+ -+//-------------------------------------------------------------------------------------------------- -+ -+static struct file_operations n2pb_fops = { -+ .owner = THIS_MODULE, -+ .read = n2pb_read, -+}; -+ -+//================================================================================================== -+ -+static void n2iom_initarch(void) -+{ -+ printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); -+ -+ *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr -+ gpio_line_config(N2_RB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ gpio_line_isr_clear(N2_RB_GPIO); -+ gpio_line_config(N2_PB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_HIGH); -+ gpio_line_isr_clear(N2_PB_GPIO); -+ -+ init_timer(&n2lm_rsg_timer); -+ init_timer(&n2lm_rsr_timer); -+ init_timer(&n2lm_d1_timer); -+ init_timer(&n2lm_d2_timer); -+// init_timer(&n2rb_timer); -+// init_timer(&n2pb_timer); -+ init_timer(&n2bz_timer); -+ n2lm_rsr_timer.function = n2lm_rsr_handler; -+ n2lm_rsg_timer.function = n2lm_rsg_handler; -+ n2lm_d2_timer.function = n2lm_d2_handler; -+ n2lm_d1_timer.function = n2lm_d1_handler; -+ n2bz_timer.function = n2bz_handler; -+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; -+ -+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 -+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds -+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; -+ n2lm_ledon(LED_ALL); -+ n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_SHORT); -+ n2lm_ledoff(LED_ALL); -+// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit -+ n2lm_ledon(LED_RS_RED); -+ -+ return; -+} -+ -+//================================================================================================== -+ -+static int __init n2iom_init(void) -+{ -+ printk(KERN_INFO "OpenN2 Misc I/O Driver Version %s\n", VERSION); -+ -+ init_jiffy = jiffies; -+ printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); -+ n2iom_initarch(); -+ -+ n2lm_class = class_create(THIS_MODULE, "nslu2"); -+ -+ if (register_chrdev(N2RB_MAJOR, "n2_rbm", &n2pb_fops) < NOERR) { -+ printk(KERN_DEBUG "Reset Button Major %d not available\n", N2RB_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2RB_MAJOR, 0), NULL, "rbuttons"); -+ } -+ if (register_chrdev(N2PB_MAJOR, "n2_pbm", &n2rb_fops) < NOERR) { -+ printk(KERN_DEBUG "Power Button Major %d not available\n", N2PB_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2PB_MAJOR, 0), NULL, "pbuttons"); -+ } -+ if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { -+ printk(KERN_DEBUG "Led Manager Major %d not available\n", N2LM_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2LM_MAJOR, 0), NULL, "leds"); -+ } -+ if (register_chrdev(N2BZ_MAJOR, "n2_bzm", &n2bz_fops) < NOERR) { -+ printk(KERN_DEBUG "Buzzer Major %d not available\n", N2BZ_MAJOR); -+ return -EBUSY; -+ } -+ else { -+ class_device_create(n2lm_class, MKDEV(N2BZ_MAJOR, 0), NULL, "buzzer"); -+ } -+ -+ if (request_irq(N2RB_IRQ, &n2rb_handler, SA_INTERRUPT, "n2_rb", NULL) < NOERR) { -+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", N2RB_IRQ); -+ return -EIO; -+ } -+ if (request_irq(N2PB_IRQ, &n2pb_handler, SA_INTERRUPT, "n2_pb", NULL) < NOERR) { -+ printk(KERN_DEBUG "Power Button IRQ %d not available\n", N2PB_IRQ); -+ return -EIO; -+ } -+ -+ enable_irq(N2PB_IRQ); -+ enable_irq(N2RB_IRQ); -+ return (NOERR); -+} -+ -+//================================================================================================== -+ -+static void __exit n2iom_exit(void) -+{ -+ remove_proc_entry(PWR_OFF_STR, NULL); -+ del_timer(&n2rb_timer); -+ free_irq(N2RB_IRQ,NULL); -+ unregister_chrdev(N2PB_MAJOR, "n2pb"); -+ class_device_destroy(n2lm_class, MKDEV(N2PB_MAJOR, 0)); -+ del_timer(&n2pb_timer); -+ free_irq(N2PB_IRQ, NULL); -+ unregister_chrdev(N2RB_MAJOR, "n2rb" ); -+ class_device_destroy(n2lm_class, MKDEV(N2RB_MAJOR, 0)); -+ del_timer(&n2lm_rsg_timer); -+ del_timer(&n2lm_rsr_timer); -+ del_timer(&n2lm_d1_timer); -+ del_timer(&n2lm_d2_timer); -+ unregister_chrdev(N2LM_MAJOR, "n2lm" ); -+ class_device_destroy(n2lm_class, MKDEV(N2LM_MAJOR, 0)); -+ unregister_chrdev(N2BZ_MAJOR, "n2bz"); -+ class_device_destroy(n2lm_class, MKDEV(N2BZ_MAJOR, 0)); -+ class_destroy(n2lm_class); -+} -+ -+module_init (n2iom_init); -+module_exit (n2iom_exit); -+ -+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -+MODULE_DESCRIPTION("OpenN2 Buttons/LEDs IO Driver"); -+MODULE_LICENSE("GPL"); -+static int debug = 7; -+module_param(debug, int, 0644); -+MODULE_PARM_DESC(debug, "Debugging enabled = 8"); -+ -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c 2005-09-16 22:44:38.000000000 +0200 -@@ -0,0 +1,120 @@ -+/* -+ * nslu2-part.c -+ * -+ * Maintainers: http://www.nslu2-linux.org/ -+ * Initial port: Mark Rakes <mrakes AT mac.com> -+ * -+ * "Parse" the fixed partition table of the Linksys NSLU2 and -+ * produce a Linux partition array to match. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/vmalloc.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+ -+/* info we know about the NSLU2's flash setup: -+ * -+ * Num Partition offset size -+ * --- --------- ---------- ----------- -+ * 0 RedBoot 0x00000000 0x00040000 -+ * 1 System Configuration 0x00040000 0x00020000 -+ * 2 Kernel 0x00060000 0x00100000 -+ * 3 Ramdisk 0x00160000 0x006a0000 -+ */ -+ #define NSLU2_NUM_FLASH_PARTITIONS 4 -+ #define NSLU2_FLASH_PART0_NAME "RedBoot" -+ #define NSLU2_FLASH_PART0_OFFSET 0x00000000 -+ #define NSLU2_FLASH_PART0_SIZE 0x00040000 -+ #define NSLU2_FLASH_PART1_NAME "System Configuration" -+ #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) -+ #define NSLU2_FLASH_PART1_SIZE 0x00020000 -+ #define NSLU2_FLASH_PART2_NAME "Kernel" -+ #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) -+ #define NSLU2_FLASH_PART2_SIZE 0x00100000 -+ #define NSLU2_FLASH_PART3_NAME "Ramdisk" -+ #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) -+ #define NSLU2_FLASH_PART3_SIZE 0x006a0000 -+ -+static int parse_nslu2_partitions(struct mtd_info *master, -+ struct mtd_partition **pparts, -+ unsigned long flash_start) -+{ -+ struct mtd_partition *parts; -+ int ret = 0, namelen = 0; -+ char *names; -+ -+ namelen = strlen(NSLU2_FLASH_PART0_NAME) + -+ strlen(NSLU2_FLASH_PART1_NAME) + -+ strlen(NSLU2_FLASH_PART2_NAME) + -+ strlen(NSLU2_FLASH_PART3_NAME) + -+ NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ -+ -+ parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); -+ if (!parts) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); -+ names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; -+ -+ /* RedBoot partition */ -+ parts[0].size = NSLU2_FLASH_PART0_SIZE; -+ parts[0].offset = NSLU2_FLASH_PART0_OFFSET; -+ parts[0].name = NSLU2_FLASH_PART0_NAME; -+ parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART0_NAME); -+ names += strlen(names)+1; -+ /* System Configuration */ -+ parts[1].size = NSLU2_FLASH_PART1_SIZE; -+ parts[1].offset = NSLU2_FLASH_PART1_OFFSET; -+ parts[1].name = NSLU2_FLASH_PART1_NAME; -+ parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART1_NAME); -+ names += strlen(names)+1; -+ /* Kernel */ -+ parts[2].size = NSLU2_FLASH_PART2_SIZE; -+ parts[2].offset = NSLU2_FLASH_PART2_OFFSET; -+ parts[2].name = NSLU2_FLASH_PART2_NAME; -+ parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART2_NAME); -+ names += strlen(names)+1; -+ /* Ramdisk */ -+ parts[3].size = NSLU2_FLASH_PART3_SIZE; -+ parts[3].offset = NSLU2_FLASH_PART3_OFFSET; -+ parts[3].name = NSLU2_FLASH_PART3_NAME; -+ parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ -+ strcpy(names, NSLU2_FLASH_PART3_NAME); -+ names += strlen(names)+1; -+ -+ ret = NSLU2_NUM_FLASH_PARTITIONS; -+ *pparts = parts; -+ out: -+ return ret; -+} -+ -+static struct mtd_part_parser nslu2_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_nslu2_partitions, -+ .name = "NSLU2", -+}; -+ -+static int __init nslu2_parser_init(void) -+{ -+ return register_mtd_parser(&nslu2_parser); -+} -+ -+static void __exit nslu2_parser_exit(void) -+{ -+ deregister_mtd_parser(&nslu2_parser); -+} -+ -+module_init(nslu2_parser_init); -+module_exit(nslu2_parser_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Mark Rakes"); -+MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-09-16 22:43:54.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+ * arch/arm/mach-ixp4xx/nslu2-pci.c -+ * -+ * NSLU2 board-level PCI initialization -+ * -+ * based on ixdp425-pci.c: -+ * Copyright (C) 2002 Intel Corporation. -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Maintainer: http://www.nslu2-linux.org/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -+// However, all the common PCI setup code presumes the standard 4 PCI -+// interrupts are available. So we compromise...we don't enable the -+// IRQ on Pin 8 but we let -+ -+#include <linux/config.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+ -+#include <asm/mach/pci.h> -+#include <asm/irq.h> -+#include <asm/hardware.h> -+#include <asm/mach-types.h> -+ -+void __init nslu2_pci_preinit(void) -+{ -+ gpio_line_config(NSLU2_PCI_INTA_PIN, -+ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ gpio_line_config(NSLU2_PCI_INTB_PIN, -+ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ gpio_line_config(NSLU2_PCI_INTC_PIN, -+ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+// gpio_line_config(NSLU2_PCI_INTD_PIN, -+// IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -+ -+ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); -+ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); -+ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); -+// gpio_line_isr_clear(NSLU2_PCI_INTD_PIN); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { -+ IRQ_NSLU2_PCI_INTA, -+ IRQ_NSLU2_PCI_INTB, -+ IRQ_NSLU2_PCI_INTC, -+// IRQ_NSLU2_PCI_INTD -+ }; -+ -+ int irq = -1; -+ -+ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && -+ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { -+ irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11 -+ } -+ -+ return irq; -+} -+ -+struct hw_pci __initdata nslu2_pci = { -+ .nr_controllers = 1, -+ .preinit = nslu2_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = nslu2_map_irq, -+}; -+ -+int __init nslu2_pci_init(void) //monkey see, monkey do -+{ -+ if (machine_is_nslu2()) -+ pci_common_init(&nslu2_pci); -+ return 0; -+} -+ -+subsys_initcall(nslu2_pci_init); -+ -diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c ---- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-09-17 00:02:40.000000000 +0200 -@@ -0,0 +1,147 @@ -+/* -+ * arch/arm/mach-ixp4xx/nslu2-setup.c -+ * -+ * NSLU2 board-setup -+ * -+ * based ixdp425-setup.c: -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Author: Mark Rakes <mrakes at mac.com> -+ * Maintainers: http://www.nslu2-linux.org/ -+ * -+ * Fixed missing init_time in MACHINE_START kas11 10/22/04 -+ * Changed to conform to new style __init ixdp425 kas11 10/22/04 -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+void __init nslu2_map_io(void) -+{ -+ ixp4xx_map_io(); -+} -+ -+static struct flash_platform_data nslu2_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource nslu2_flash_resource = { -+ .start = NSLU2_FLASH_BASE, -+ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device nslu2_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &nslu2_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &nslu2_flash_resource, -+}; -+ -+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { -+ .sda_pin = NSLU2_SDA_PIN, -+ .scl_pin = NSLU2_SCL_PIN, -+}; -+ -+static struct platform_device nslu2_i2c_controller = { -+ .name = "IXP4XX-I2C", -+ .id = 0, -+ .dev = { -+ .platform_data = &nslu2_i2c_gpio_pins, -+ }, -+ .num_resources = 0 -+}; -+ -+static struct resource nslu2_uart_resources[] = { -+ { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ }, -+ { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct plat_serial8250_port nslu2_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ } -+}; -+ -+static struct platform_device nslu2_uart = { -+ .name = "serial8250", -+ .id = 0, -+ .dev.platform_data = nslu2_uart_data, -+ .num_resources = 2, -+ .resource = nslu2_uart_resources -+}; -+ -+static struct platform_device *nslu2_devices[] __initdata = { -+ &nslu2_i2c_controller, -+ &nslu2_flash, -+ &nslu2_uart -+}; -+ -+static void n2_power_off(void) -+{ -+ /* This causes the box to drop the power and go dead. */ -+#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -+ *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio -+ *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed -+} -+ -+static void __init nslu2_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ pm_power_off = n2_power_off; -+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); -+} -+ -+MACHINE_START(NSLU2, "Linksys NSLU2") -+ /* Maintainer: www.nslu2-linux.org */ -+ .phys_ram = PHYS_OFFSET, -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, -+ .boot_params = 0x00000100, -+ .map_io = nslu2_map_io, -+ .init_irq = ixp4xx_init_irq, //FIXME: all irq are off here -+ .timer = &ixp4xx_timer, -+ .init_machine = nslu2_init, -+ // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? -+MACHINE_END diff --git a/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch b/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch deleted file mode 100644 index b5ce101d68..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/55-nslu2-rpbutton.patch +++ /dev/null @@ -1,139 +0,0 @@ ---- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9 -+++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12 -@@ -158,6 +158,8 @@ - #define LED_DISK2 3 - #define LED_ALL 4 - -+static int nslu2_shutdown_in_progress = 0; -+ - static unsigned long init_jiffy = 0; //jiffies at init time - static unsigned long rb_presses = 0; //number of reset button presses - static unsigned long ontime = 50; -@@ -503,40 +505,20 @@ - static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) - { - void *ret; -- -- wake_up(&n2pb_waitq); -- remove_proc_entry(PWR_OFF_STR, NULL); //no parent -- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); -- ret = create_proc_entry(PWR_OFF_STR, 0, NULL); -- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); -- --// WARNING: This is RUDE...it unconditionally pulls the power plug. --// Your data will be at risk...since this is just a test system --// I am leaving it enabled...eventually userland needs to get the --// message, do an orderly shutdown and use an ioctl or something in --// /proc/powerdowm to actually have us pull the plug. -- -- machine_power_off(); -- -+ if (!nslu2_shutdown_in_progress++) { -+ wake_up(&n2pb_waitq); -+ remove_proc_entry(PWR_OFF_STR, NULL); //no parent -+ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK" -+ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); -+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret)); -+ kill_proc(1,SIGINT,1); // Signal init to shut down -+ } else { -+ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise! -+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine! -+ } - return IRQ_HANDLED; - } - --//================================================================================================== --// --//static void do_rb_timeout(unsigned long data) --//{ --// int i; --// --// for (i = 0; i < rb_presses; i++) --// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); --// return; --//} --// --//================================================================================================== --// does nothing -- waiting for userland to define --// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so --// we hang in a loop until the button is no longer pressed -- - struct testr { - int ctl; - long param; -@@ -544,72 +526,11 @@ - - static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) - { -+// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable - -- static struct testr test[] = { -- { N2LM_ALL_OFF,0 }, -- { N2LM_ON,0 }, -- { N2LM_OFF,0 }, -- { N2LM_ON,1 }, -- { N2LM_ALL_OFF,1 }, -- { N2LM_ON,2 }, -- { N2LM_OFF,2 }, -- { N2LM_ON,3 }, -- { N2LM_OFF,3 }, -- { N2LM_BLINK,0 }, -- { N2LM_OFF,0 }, -- { N2LM_BLINK,1 }, -- { N2LM_OFF,1 }, -- { N2LM_BLINK,2 }, -- { N2LM_OFF,2 }, -- { N2LM_BLINK,3 }, -- { N2LM_OFF,3 }, -- { N2LM_ALL_OFF,0 }, -- { N2LM_ALT,1 }, -- { N2LM_OFF,1 }, -- { N2LM_ALL_ON,0 } -- }; -- -- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); -- - wake_up(&n2rb_waitq); -- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) -- ; //wait for button release -- -- if (rb_presses > 20) -- rb_presses = 0; -- tone = (rb_presses * 50) + 200; -- ontime = (rb_presses*10) + 100; -- offtime = 500 - (rb_presses*20); -- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); -- rb_presses++; -- -- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); -- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); --// if (rb_presses == 0) { --// init_jiffy = jiffies; --// init_timer (&n2rb_timer); --// n2rb_timer.function = do_rb_timeout; --// }; --// --// if (rb_presses == 8) --// rb_presses = 0; --// if (rb_presses & 1) --// n2lm_ledon(test[rb_presses]); --// else --// n2lm_ledoff(test[rb_presses]); --// --// n2rb_timer.expires = (jiffies + RB_DELAY); --// add_timer (&n2rb_timer); --// if (rb_presses < 5) { --// if (rb_presses > 0) --// n2lm_ledoff(rb_presses); --// n2lm_ledon(++rb_presses); --// n2lm_timer_start(rb_presses); --// }; -- -- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); -- return IRQ_HANDLED; -- -+ machine_power_off(); -+ return IRQ_HANDLED; // So we don't get a nobody cared error :-P - } - - //================================================================================================== diff --git a/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch b/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch deleted file mode 100644 index 4e68456e20..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/70-xscale-reset.patch +++ /dev/null @@ -1,155 +0,0 @@ ---- linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-03-09 00:12:44.000000000 -0800 -+++ linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-06-18 15:39:22.701222319 -0700 -@@ -137,23 +137,129 @@ - * same state as it would be if it had been reset, and branch - * to what would be the reset vector. - * -+ * This code is ixp425 specific with respect to the reset of -+ * the 'configuration register' - to be found at address -+ * 0xC40000020 'IXP425_EXP_CNFGO' -+ * - * loc: location to jump to for soft reset - */ - .align 5 - ENTRY(cpu_xscale_reset) -+ @ always branch to 0 -+ mov r0, #0 -+ -+ @ disable both FIQ and IRQ, put us into 32 bit -+ @ SVC mode (no thumb). - mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r1 @ reset CPSR -- mrc p15, 0, r1, c1, c0, 0 @ ctrl register -- bic r1, r1, #0x0086 @ ........B....CA. -- bic r1, r1, #0x3900 @ ..VIZ..S........ -- mcr p15, 0, r1, c1, c0, 0 @ ctrl register -- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB -- bic r1, r1, #0x0001 @ ...............M -- mcr p15, 0, r1, c1, c0, 0 @ ctrl register -- @ CAUTION: MMU turned off from this point. We count on the pipeline -- @ already containing those two last instructions to survive. -+ -+ @ disable debug, clock and power registers are -+ @ unimplemented. -+ mcr p14, 0, r0, c10, c0, 0 @ disable debug -+ -+ @ disable the performance monitor -+ mcr p14, 0, r0, c0, c1, 0 @ PMNC (ctrl reg) -+ mcr p14, 0, r0, c4, c1, 0 @ INTEN (intrpt enable) -+ -+ @ wait for p14 to complete -+ mrc p14, 0, ip, c4, c1, 0 @ arbitrary read -+ mov ip, ip @ sync -+ -+ @ clear the PID register -+ mcr p15, 0, r0, c13, c0, 0 @ OR nothing with address! -+ -+ @ unlock the TLBs and the I/D cache locks -+ mcr p15, 0, r0, c10, c8, 1 @ data TLB unlocked -+ mcr p15, 0, r0, c10, c4, 1 @ instruction TLB unlocked -+ mcr p15, 0, r0, c9, c2, 1 @ unlock data cache -+ mcr p15, 0, r0, c9, c1, 1 @ unlock instruction cache -+ -+ @ zap the minidata cache to write through with write coalescing -+ @ disabled. -+ mov r1, #0x21 @ MD=b10, K=1 -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -+ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register -+ mov ip, ip @ sync -+ mcr p15, 0, r1, c1, c0, 1 @ write through, no coalesc -+ -+ @ set the control register, the MMU is enabled but everything else -+ @ is disabled at this point, r1 contains the control register flags -+ @ the process is now in little-endian mode (no matter, we aren't -+ @ going to do any <word access) -+ mov r1, #0x79 @ 00vIz0rs.b1111caM -+ orr r1, r1, #0x1000 @ I-cache enable -+ mcr p15, 0, r1, c1, c0, 0 -+ mrc p15, 0, ip, c1, c0, 0 -+ mov ip, ip @ sync to coproc -+ mov r1, #0x78 @ 00viz0rs.b1111cam -+ -+ @ and flush the I/D cache and BTB -+ mcr p15, 0, r0, c7, c7, 0 -+ -+ @ that's most of the work. The only thing which remains is to -+ @ remap the flash memory and disable the MMU. Do some setup -+ @ for this, also get ready to set the LED to red and put in -+ @ a watchdog timer. -+ -+ @ get ready to reset the configuration registers in the expansion -+ @ bus. CFGN1 disables byte swap and interrupt. -+ ldr r3, =IXP4XX_PERIPHERAL_BASE_VIRT -+ ldr r4, [r3, #IXP4XX_EXP_CFG1_OFFSET] -+ bic r4, r4, #0x13 @ -BYTE_SWAP_EN, -SW_INT? -+ str r4, [r3, #IXP4XX_EXP_CFG1_OFFSET] -+ -+ @ load the current configuration register from its -+ @ virtual address and set the MEM_MAP bit ready to map the -+ @ flash back to address 0, but don't write it yet. -+ ldr r4, [r3, #IXP4XX_EXP_CFG0_OFFSET] -+ orr r4, r4, #0x80000000 -+ -+ @ load the GPIO OUTR register address and current value, -+ @ set the low nibble to just red LED on. -+ ldr r5, =IXP4XX_GPIO_BASE_VIRT -+ ldr r6, [r5, #IXP4XX_GPIO_GPOUTR_OFFSET] -+ bic r6, r6, #0xf -+ orr r6, r6, #0xd -+ -+ @ load the watchdog timer virtual address, set the key and -+ @ the timer and start the down counter -+ ldr r7, =IXP4XX_TIMER_BASE_VIRT -+ ldr r8, =IXP4XX_WDT_KEY @ set key -+ str r8, [r7, #IXP4XX_OSWK_OFFSET] -+ mov r8, #0x1000000 @ about 0.25 seconds -+ str r8, [r7, #IXP4XX_OSWT_OFFSET] @ set timer -+ mov r8, #(IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE) -+ str r8, [r7, #IXP4XX_OSWE_OFFSET] @ enable reset -+ -+ @ invalidate the TLBs to ensure that there isn't a match for -+ @ '0' there. - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs -- mov pc, r0 -+ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register -+ mov ip, ip @ sync -+ -+ @ remap the flash (after preloading instructions into the -+ @ I-cache) then turn off the MMU and branch to 0 when it is -+ @ off. It seems that RedBoot relies on the page tables being -+ @ set up on boot, so set the page table head register too. -+ mov r7, #0x4000 @ flash page table -+ ldr r8, =IXP4XX_GPIO_BASE_PHYS @ for led setting -+ bic r9, r6, #0xc @ disk1+disk2 led on -+ str r6, [r5, #IXP4XX_GPIO_GPOUTR_OFFSET] @ red led -+ b cache -+ -+ @ cached instructions These 8 instructions are valid in the cache -+ @ along with the associated TLB as soon as the first is executed. -+ @ They are used to effect the transition back into the flash -+ @ ROM code. -+ .align 5 -+cache: str r4, [r3, #IXP4XX_EXP_CFG0_OFFSET] @0 no memory! -+ mcr p15, 0, r7, c2, c0, 0 @1 set translation table base -+ mcr p15, 0, r1, c1, c0, 0 @2 no MMU! -+ mrc p15, 0, ip, c2, c0, 0 @3 arbitrary read of cp15 -+ str r9, [r8, #IXP4XX_GPIO_GPOUTR_OFFSET] @4 red+disk1+disk2 led -+ sub pc, r0, ip, LSR #32 @5 sync and branch to zero -+ nop @6 -+ nop @7 - - /* - * cpu_xscale_do_idle() -@@ -168,8 +274,10 @@ - .align 5 - - ENTRY(cpu_xscale_do_idle) -- mov r0, #1 -- mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE -+ @ NSLU2/ixp420: not implemented in the hardware, docs -+ @ say do not write! -+ @mov r0, #1 -+ @mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE - mov pc, lr - - /* ================================= CACHE ================================ */ diff --git a/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch b/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch deleted file mode 100644 index 1fc432b5db..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/90-little-endian.patch +++ /dev/null @@ -1,148 +0,0 @@ -diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/Makefile linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile ---- linux-2.6.11.12/arch/arm/boot/compressed/Makefile 2005-06-12 04:45:37.000000000 +0200 -+++ linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile 2005-07-17 12:13:55.000000000 +0200 -@@ -56,6 +56,8 @@ endif - - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) - OBJS += big-endian.o -+else -+OBJS += little-endian.o - endif - - # -diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S ---- linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S 2005-07-17 12:13:55.000000000 +0200 -@@ -0,0 +1,13 @@ -+/* -+ * linux/arch/arm/boot/compressed/little-endian.S -+ * -+ * Switch CPU into little endian mode. -+ * Author: Nicolas Pitre -+ */ -+ -+ .section ".start", #alloc, #execinstr -+ -+ mrc p15, 0, r0, c1, c0, 0 @ read control reg -+ bic r0, r0, #(1 << 7) @ enable little endian mode -+ mcr p15, 0, r0, c1, c0, 0 @ write control reg -+ -diff -urpN linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c ---- linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c 2005-06-12 04:45:37.000000000 +0200 -+++ linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c 2005-07-17 12:13:55.000000000 +0200 -@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) - #ifdef __ARMEB__ - *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; - #else -- *PCI_CSR = PCI_CSR_IC; -+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; - #endif - - pr_debug("DONE\n"); -diff -urpN linux-2.6.11.12/drivers/mtd/maps/ixp4xx.c linux-2.6.11.12-le2/drivers/mtd/maps/ixp4xx.c ---- linux-2.6.11.12/drivers/mtd/maps/ixp4xx.c 2005-07-17 12:13:05.000000000 +0200 -+++ linux-2.6.11.12-le2/drivers/mtd/maps/ixp4xx.c 2005-07-17 12:13:55.000000000 +0200 -@@ -28,12 +28,12 @@ - #include <asm/io.h> - #include <asm/mach-types.h> - #include <asm/mach/flash.h> -- -+#include <asm/byteorder.h> - #include <asm/unaligned.h> - - #include <linux/reboot.h> - --#ifndef __ARMEB__ -+#if !defined(__ARMEB__) && !defined(CONFIG_ARCH_NSLU2) - #define BYTE0(h) ((h) & 0xFF) - #define BYTE1(h) (((h) >> 8) & 0xFF) - #else -@@ -44,6 +44,10 @@ - static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) - { - map_word val; -+ -+#ifndef __ARMEB__ -+ ofs ^= 2; -+#endif - val.x[0] = *(__u16 *) (map->map_priv_1 + ofs); - return val; - } -@@ -53,6 +57,21 @@ static map_word ixp4xx_read16(struct map - * when attached to a 16-bit wide device (such as the 28F128J3A), - * so we can't just memcpy_fromio(). - */ -+ -+#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS) -+struct fis_image_desc { -+ unsigned char name[16]; // Null terminated name -+ unsigned long flash_base; // Address within FLASH of image -+ unsigned long mem_base; // Address in memory where it executes -+ unsigned long size; // Length of image -+ unsigned long entry_point; // Execution entry point -+ unsigned long data_length; // Length of actual data -+ unsigned char _pad[256-(16+7*sizeof(unsigned long))]; -+ unsigned long desc_cksum; // Checksum over image descriptor -+ unsigned long file_cksum; // Checksum over image data -+}; -+#endif -+ - static void ixp4xx_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) - { -@@ -62,13 +81,34 @@ static void ixp4xx_copy_from(struct map_ - u16 data; - - for (i = 0; i < (len / 2); i++) { -- data = get_unaligned((u16*)(src + i)); -+ int j = i; -+#ifndef __ARMEB__ -+ j ^= 1; -+#endif -+ data = get_unaligned((u16*)(src + j)); - dest[i * 2] = BYTE0(data); - dest[i * 2 + 1] = BYTE1(data); - } - -+#ifndef __ARMEB__ -+ i ^= 1; -+#endif -+ - if (len & 1) - dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i))); -+ -+ /* Hack: Last sector contains RedBoot FIS table in big-endian format. -+ Convert into little endian format so we can use RedBoot parser */ -+#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS) -+ if (from == 0x7e0000) { -+ struct fis_image_desc *desc = (struct fis_image_desc *)to; -+ for (i=0; i < (len/sizeof(struct fis_image_desc)); i++) { -+ desc[i].flash_base = be32_to_cpu(desc[i].flash_base); -+ desc[i].mem_base = be32_to_cpu(desc[i].mem_base); -+ desc[i].size = be32_to_cpu(desc[i].size); -+ } -+ } -+#endif - } - - /* -@@ -77,6 +117,9 @@ static void ixp4xx_copy_from(struct map_ - */ - static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) - { -+#ifndef __ARMEB__ -+ adr ^= 2; -+#endif - if (!(adr & 1)) - *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; - } -@@ -86,6 +129,9 @@ static void ixp4xx_probe_write16(struct - */ - static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) - { -+#ifndef __ARMEB__ -+ adr ^= 2; -+#endif - *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; - } - diff --git a/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch b/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch deleted file mode 100644 index f86830d82b..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/95-nslu2-defconfig.patch +++ /dev/null @@ -1,1442 +0,0 @@ -diff -urN linux-2.6.13.1/arch/arm/configs/nslu2_defconfig nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig ---- linux-2.6.13.1/arch/arm/configs/nslu2_defconfig 1970-01-01 01:00:00.000000000 +0100 -+++ nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig 2005-09-17 16:45:43.000000000 +0200 -@@ -0,0 +1,1438 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.13.1 -+# Sat Sep 17 16:45:18 2005 -+# -+CONFIG_ARM=y -+CONFIG_MMU=y -+CONFIG_UID16=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_CLEAN_COMPILE=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+# CONFIG_POSIX_MQUEUE is not set -+CONFIG_BSD_PROCESS_ACCT=y -+# CONFIG_BSD_PROCESS_ACCT_V3 is not set -+CONFIG_SYSCTL=y -+# CONFIG_AUDIT is not set -+CONFIG_HOTPLUG=y -+CONFIG_KOBJECT_UEVENT=y -+# CONFIG_IKCONFIG is not set -+CONFIG_EMBEDDED=y -+# CONFIG_KALLSYMS is not set -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SHMEM=y -+CONFIG_CC_ALIGN_FUNCTIONS=0 -+CONFIG_CC_ALIGN_LABELS=0 -+CONFIG_CC_ALIGN_LOOPS=0 -+CONFIG_CC_ALIGN_JUMPS=0 -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_OBSOLETE_MODPARM=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# System Type -+# -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_CAMELOT is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_IOP3XX is not set -+CONFIG_ARCH_IXP4XX=y -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_OMAP is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_AAEC2000 is not set -+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -+ -+# -+# Intel IXP4xx Implementation Options -+# -+ -+# -+# IXP4xx Platforms -+# -+# CONFIG_ARCH_AVILA is not set -+# CONFIG_ARCH_ADI_COYOTE is not set -+# CONFIG_ARCH_IXDP425 is not set -+# CONFIG_MACH_IXDPG425 is not set -+# CONFIG_MACH_IXDP465 is not set -+CONFIG_ARCH_NSLU2=y -+# CONFIG_ARCH_PRPMC1100 is not set -+# CONFIG_MACH_GTWX5715 is not set -+ -+# -+# IXP4xx Options -+# -+CONFIG_IXP4XX_INDIRECT_PCI=y -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_XSCALE=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5T=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_TLB_V4WBI=y -+ -+# -+# Processor Features -+# -+# CONFIG_ARM_THUMB is not set -+CONFIG_CPU_BIG_ENDIAN=y -+CONFIG_XSCALE_PMU=y -+CONFIG_DMABOUNCE=y -+ -+# -+# Bus support -+# -+CONFIG_ISA_DMA_API=y -+CONFIG_PCI=y -+CONFIG_PCI_LEGACY_PROC=y -+# CONFIG_PCI_NAMES is not set -+# CONFIG_PCI_DEBUG is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="root=/dev/sda2 ro rootdelay=10 rootfstype=ext2 noinitrd noirqdebug mem=32M@0x00000000 console=ttyS0,115200n8" -+# CONFIG_XIP_KERNEL is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+CONFIG_APM=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=m -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_BOOTP=y -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_IP_TCPDIAG=y -+# CONFIG_IP_TCPDIAG_IPV6 is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_BIC=y -+ -+# -+# IP: Virtual Server Configuration -+# -+CONFIG_IP_VS=m -+CONFIG_IP_VS_DEBUG=y -+CONFIG_IP_VS_TAB_BITS=12 -+ -+# -+# IPVS transport protocol load balancing support -+# -+# CONFIG_IP_VS_PROTO_TCP is not set -+# CONFIG_IP_VS_PROTO_UDP is not set -+# CONFIG_IP_VS_PROTO_ESP is not set -+# CONFIG_IP_VS_PROTO_AH is not set -+ -+# -+# IPVS scheduler -+# -+CONFIG_IP_VS_RR=m -+CONFIG_IP_VS_WRR=m -+CONFIG_IP_VS_LC=m -+CONFIG_IP_VS_WLC=m -+CONFIG_IP_VS_LBLC=m -+CONFIG_IP_VS_LBLCR=m -+CONFIG_IP_VS_DH=m -+CONFIG_IP_VS_SH=m -+# CONFIG_IP_VS_SED is not set -+# CONFIG_IP_VS_NQ is not set -+ -+# -+# IPVS application helper -+# -+# CONFIG_IPV6 is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_BRIDGE_NETFILTER=y -+ -+# -+# IP: Netfilter Configuration -+# -+# CONFIG_IP_NF_CONNTRACK is not set -+# CONFIG_IP_NF_CONNTRACK_MARK is not set -+# CONFIG_IP_NF_QUEUE is not set -+# CONFIG_IP_NF_IPTABLES is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# Bridge: Netfilter Configuration -+# -+# CONFIG_BRIDGE_NF_EBTABLES is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+# CONFIG_DECNET is not set -+CONFIG_LLC=m -+# CONFIG_LLC2 is not set -+CONFIG_IPX=m -+# CONFIG_IPX_INTERN is not set -+CONFIG_ATALK=m -+CONFIG_DEV_APPLETALK=y -+CONFIG_IPDDP=m -+CONFIG_IPDDP_ENCAP=y -+CONFIG_IPDDP_DECAP=y -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+CONFIG_NET_SCH_CLK_JIFFIES=y -+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -+# CONFIG_NET_SCH_CLK_CPU is not set -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+# CONFIG_NET_SCH_HFSC is not set -+CONFIG_NET_SCH_PRIO=m -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+# CONFIG_NET_SCH_NETEM is not set -+CONFIG_NET_SCH_INGRESS=m -+CONFIG_NET_QOS=y -+CONFIG_NET_ESTIMATOR=y -+CONFIG_NET_CLS=y -+# CONFIG_NET_CLS_BASIC is not set -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+# CONFIG_CLS_U32_PERF is not set -+# CONFIG_NET_CLS_IND is not set -+# CONFIG_CLS_U32_MARK is not set -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+CONFIG_NET_CLS_POLICE=y -+ -+# -+# Network testing -+# -+CONFIG_NET_PKTGEN=m -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=m -+CONFIG_BT_L2CAP=m -+CONFIG_BT_SCO=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+# CONFIG_BT_HIDP is not set -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIUSB=m -+CONFIG_BT_HCIUSB_SCO=y -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+CONFIG_MTD_REDBOOT_PARTS=y -+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+# CONFIG_MTD_XIP is not set -+ -+# -+# Mapping drivers for chip access -+# -+CONFIG_MTD_COMPLEX_MAPPINGS=y -+# CONFIG_MTD_PHYSMAP is not set -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+CONFIG_MTD_IXP4XX=y -+# CONFIG_MTD_EDB7312 is not set -+# CONFIG_MTD_PCI is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_PMC551 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLKMTD is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+ -+# -+# NAND Flash Device Drivers -+# -+# CONFIG_MTD_NAND is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+ -+# -+# Block devices -+# -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_SX8 is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=10240 -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+# CONFIG_CDROM_PKTCDVD is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+CONFIG_IOSCHED_DEADLINE=y -+# CONFIG_IOSCHED_CFQ is not set -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# ATA/ATAPI/MFM/RLL support -+# -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+CONFIG_SCSI=y -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI Transport Attributes -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -+# CONFIG_SCSI_3W_9XXX is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_MEGARAID_NEWGEN is not set -+# CONFIG_MEGARAID_LEGACY is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_IPS is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_SYM53C8XX_2 is not set -+# CONFIG_SCSI_IPR is not set -+# CONFIG_SCSI_QLOGIC_FC is not set -+# CONFIG_SCSI_QLOGIC_1280 is not set -+CONFIG_SCSI_QLA2XXX=y -+# CONFIG_SCSI_QLA21XX is not set -+# CONFIG_SCSI_QLA22XX is not set -+# CONFIG_SCSI_QLA2300 is not set -+# CONFIG_SCSI_QLA2322 is not set -+# CONFIG_SCSI_QLA6312 is not set -+# CONFIG_SCSI_QLA24XX is not set -+# CONFIG_SCSI_LPFC is not set -+# CONFIG_SCSI_DC395x is not set -+# CONFIG_SCSI_DC390T is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+CONFIG_MD=y -+CONFIG_BLK_DEV_MD=m -+# CONFIG_MD_LINEAR is not set -+CONFIG_MD_RAID0=m -+CONFIG_MD_RAID1=m -+# CONFIG_MD_RAID10 is not set -+CONFIG_MD_RAID5=m -+# CONFIG_MD_RAID6 is not set -+# CONFIG_MD_MULTIPATH is not set -+# CONFIG_MD_FAULTY is not set -+# CONFIG_BLK_DEV_DM is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+# CONFIG_FUSION_SPI is not set -+# CONFIG_FUSION_FC is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+# CONFIG_IEEE1394 is not set -+ -+# -+# I2O device support -+# -+# CONFIG_I2O is not set -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_HAPPYMEAL is not set -+# CONFIG_SUNGEM is not set -+# CONFIG_NET_VENDOR_3COM is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+ -+# -+# Tulip family network device support -+# -+# CONFIG_NET_TULIP is not set -+# CONFIG_HP100 is not set -+CONFIG_NET_PCI=y -+# CONFIG_PCNET32 is not set -+# CONFIG_AMD8111_ETH is not set -+# CONFIG_ADAPTEC_STARFIRE is not set -+# CONFIG_B44 is not set -+# CONFIG_FORCEDETH is not set -+# CONFIG_DGRS is not set -+# CONFIG_EEPRO100 is not set -+# CONFIG_E100 is not set -+# CONFIG_FEALNX is not set -+# CONFIG_NATSEMI is not set -+# CONFIG_NE2K_PCI is not set -+# CONFIG_8139CP is not set -+# CONFIG_8139TOO is not set -+# CONFIG_SIS900 is not set -+# CONFIG_EPIC100 is not set -+# CONFIG_SUNDANCE is not set -+# CONFIG_TLAN is not set -+# CONFIG_VIA_RHINE is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+# CONFIG_R8169 is not set -+# CONFIG_SKGE is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_VIA_VELOCITY is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_BNX2 is not set -+ -+# -+# Ethernet (10000 Mbit) -+# -+# CONFIG_IXGB is not set -+# CONFIG_S2IO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+CONFIG_NET_RADIO=y -+ -+# -+# Obsolete Wireless cards support (pre-802.11) -+# -+# CONFIG_STRIP is not set -+ -+# -+# Wireless 802.11b ISA/PCI cards support -+# -+# CONFIG_HERMES is not set -+# CONFIG_ATMEL is not set -+ -+# -+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -+# -+# CONFIG_PRISM54 is not set -+CONFIG_NET_WIRELESS=y -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+# CONFIG_PPPOE is not set -+# CONFIG_SLIP is not set -+# CONFIG_NET_FC is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+# CONFIG_INPUT is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+CONFIG_SERIAL_8250=y -+CONFIG_SERIAL_8250_CONSOLE=y -+CONFIG_SERIAL_8250_NR_UARTS=2 -+# CONFIG_SERIAL_8250_EXTENDED is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+# CONFIG_SERIAL_JSM is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_IXP4XX_WATCHDOG=y -+ -+# -+# PCI-based Watchdog Cards -+# -+# CONFIG_PCIPCWATCHDOG is not set -+# CONFIG_WDTPCI is not set -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+# CONFIG_NVRAM is not set -+# CONFIG_RTC is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_DRM is not set -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=y -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_ALI1535 is not set -+# CONFIG_I2C_ALI1563 is not set -+# CONFIG_I2C_ALI15X3 is not set -+# CONFIG_I2C_AMD756 is not set -+# CONFIG_I2C_AMD8111 is not set -+# CONFIG_I2C_I801 is not set -+# CONFIG_I2C_I810 is not set -+# CONFIG_I2C_PIIX4 is not set -+# CONFIG_I2C_IOP3XX is not set -+# CONFIG_I2C_ISA is not set -+CONFIG_I2C_IXP4XX=y -+# CONFIG_I2C_NFORCE2 is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_PROSAVAGE is not set -+# CONFIG_I2C_SAVAGE4 is not set -+# CONFIG_SCx200_ACB is not set -+# CONFIG_I2C_SIS5595 is not set -+# CONFIG_I2C_SIS630 is not set -+# CONFIG_I2C_SIS96X is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_VIA is not set -+# CONFIG_I2C_VIAPRO is not set -+# CONFIG_I2C_VOODOO3 is not set -+# CONFIG_I2C_PCA_ISA is not set -+CONFIG_I2C_SENSOR=y -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+CONFIG_SENSORS_EEPROM=y -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_RTC8564 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+CONFIG_SENSORS_X1205=y -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# Hardware Monitoring support -+# -+# CONFIG_HWMON is not set -+ -+# -+# Misc devices -+# -+ -+# -+# Multimedia devices -+# -+CONFIG_VIDEO_DEV=m -+ -+# -+# Video For Linux -+# -+ -+# -+# Video Adapters -+# -+# CONFIG_VIDEO_BT848 is not set -+# CONFIG_VIDEO_CPIA is not set -+# CONFIG_VIDEO_SAA5246A is not set -+# CONFIG_VIDEO_SAA5249 is not set -+# CONFIG_TUNER_3036 is not set -+# CONFIG_VIDEO_STRADIS is not set -+# CONFIG_VIDEO_ZORAN is not set -+# CONFIG_VIDEO_SAA7134 is not set -+# CONFIG_VIDEO_MXB is not set -+# CONFIG_VIDEO_DPC is not set -+# CONFIG_VIDEO_HEXIUM_ORION is not set -+# CONFIG_VIDEO_HEXIUM_GEMINI is not set -+# CONFIG_VIDEO_CX88 is not set -+# CONFIG_VIDEO_OVCAMCHIP is not set -+ -+# -+# Radio Adapters -+# -+# CONFIG_RADIO_GEMTEK_PCI is not set -+# CONFIG_RADIO_MAXIRADIO is not set -+# CONFIG_RADIO_MAESTRO is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_FB is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=y -+CONFIG_SND_TIMER=y -+CONFIG_SND_PCM=y -+CONFIG_SND_HWDEP=y -+CONFIG_SND_RAWMIDI=y -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=y -+CONFIG_SND_PCM_OSS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# PCI devices -+# -+# CONFIG_SND_ALI5451 is not set -+# CONFIG_SND_ATIIXP is not set -+# CONFIG_SND_ATIIXP_MODEM is not set -+# CONFIG_SND_AU8810 is not set -+# CONFIG_SND_AU8820 is not set -+# CONFIG_SND_AU8830 is not set -+# CONFIG_SND_AZT3328 is not set -+# CONFIG_SND_BT87X is not set -+# CONFIG_SND_CS46XX is not set -+# CONFIG_SND_CS4281 is not set -+# CONFIG_SND_EMU10K1 is not set -+# CONFIG_SND_EMU10K1X is not set -+# CONFIG_SND_CA0106 is not set -+# CONFIG_SND_KORG1212 is not set -+# CONFIG_SND_MIXART is not set -+# CONFIG_SND_NM256 is not set -+# CONFIG_SND_RME32 is not set -+# CONFIG_SND_RME96 is not set -+# CONFIG_SND_RME9652 is not set -+# CONFIG_SND_HDSP is not set -+# CONFIG_SND_HDSPM is not set -+# CONFIG_SND_TRIDENT is not set -+# CONFIG_SND_YMFPCI is not set -+# CONFIG_SND_ALS4000 is not set -+# CONFIG_SND_CMIPCI is not set -+# CONFIG_SND_ENS1370 is not set -+# CONFIG_SND_ENS1371 is not set -+# CONFIG_SND_ES1938 is not set -+# CONFIG_SND_ES1968 is not set -+# CONFIG_SND_MAESTRO3 is not set -+# CONFIG_SND_FM801 is not set -+# CONFIG_SND_ICE1712 is not set -+# CONFIG_SND_ICE1724 is not set -+# CONFIG_SND_INTEL8X0 is not set -+# CONFIG_SND_INTEL8X0M is not set -+# CONFIG_SND_SONICVIBES is not set -+# CONFIG_SND_VIA82XX is not set -+# CONFIG_SND_VIA82XX_MODEM is not set -+# CONFIG_SND_VX222 is not set -+# CONFIG_SND_HDA_INTEL is not set -+ -+# -+# ALSA ARM devices -+# -+ -+# -+# USB devices -+# -+CONFIG_SND_USB_AUDIO=y -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_SUSPEND is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+CONFIG_USB_EHCI_HCD=y -+# CONFIG_USB_EHCI_SPLIT_ISO is not set -+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_UHCI_HCD is not set -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_AUDIO is not set -+ -+# -+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -+# -+# CONFIG_USB_MIDI is not set -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=m -+ -+# -+# Input core support is needed for USB HID input layer or HIDBP support -+# -+CONFIG_USB_HIDDEV=y -+ -+# -+# USB HID Boot Protocol drivers -+# -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Multimedia devices -+# -+# CONFIG_USB_DABUSB is not set -+# CONFIG_USB_VICAM is not set -+# CONFIG_USB_DSBR is not set -+# CONFIG_USB_IBMCAM is not set -+# CONFIG_USB_KONICAWC is not set -+# CONFIG_USB_OV511 is not set -+# CONFIG_USB_SE401 is not set -+# CONFIG_USB_SN9C102 is not set -+# CONFIG_USB_STV680 is not set -+# CONFIG_USB_PWC is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=y -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=y -+CONFIG_USB_RTL8150=y -+CONFIG_USB_USBNET=y -+ -+# -+# USB Host-to-Host Cables -+# -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_GENESYS=y -+CONFIG_USB_NET1080=y -+CONFIG_USB_PL2301=y -+CONFIG_USB_KC2190=y -+ -+# -+# Intelligent USB Devices/Gadgets -+# -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_ZAURUS=y -+CONFIG_USB_CDCETHER=y -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_AX8817X=y -+# CONFIG_USB_ZD1201 is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+# CONFIG_USB_SERIAL_AIRPRIME is not set -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+# CONFIG_USB_SERIAL_KEYSPAN is not set -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_HP4X=m -+# CONFIG_USB_SERIAL_SAFE is not set -+# CONFIG_USB_SERIAL_TI is not set -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_EZUSB=y -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+CONFIG_USB_LCD=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGETKIT is not set -+# CONFIG_USB_PHIDGETSERVO is not set -+# CONFIG_USB_IDMOUSE is not set -+CONFIG_USB_SISUSBVGA=m -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+# CONFIG_USB_GADGET is not set -+ -+# -+# MMC/SD Card support -+# -+# CONFIG_MMC is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_REISERFS_FS=m -+# CONFIG_REISERFS_CHECK is not set -+# CONFIG_REISERFS_PROC_INFO is not set -+# CONFIG_REISERFS_FS_XATTR is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+ -+# -+# XFS support -+# -+# CONFIG_XFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+# CONFIG_JOLIET is not set -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=m -+CONFIG_UDF_NLS=y -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -+CONFIG_NTFS_FS=m -+# CONFIG_NTFS_DEBUG is not set -+# CONFIG_NTFS_RW is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_SYSFS=y -+# CONFIG_DEVPTS_FS_XATTR is not set -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_XATTR is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=m -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_NFSD=m -+# CONFIG_NFSD_V3 is not set -+CONFIG_NFSD_TCP=y -+CONFIG_LOCKD=m -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=m -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+CONFIG_SMB_FS=m -+# CONFIG_SMB_NLS_DEFAULT is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=m -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=m -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_NLS_UTF8=m -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_MAGIC_SYSRQ=y -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_DEBUG_SLAB is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_FS is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_DEBUG_USER is not set -+# CONFIG_DEBUG_WAITQ is not set -+CONFIG_DEBUG_ERRORS=y -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=m -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_DES=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_TEST=m -+ -+# -+# Hardware crypto devices -+# -+ -+# -+# Library routines -+# -+CONFIG_CRC_CCITT=m -+CONFIG_CRC32=y -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch b/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch deleted file mode 100644 index 4b6e28a878..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/96-nslu2-le-defconfig.patch +++ /dev/null @@ -1,29 +0,0 @@ -diff -urN nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig test/arch/arm/configs/nslu2_defconfig ---- nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig 2005-09-17 16:45:43.000000000 +0200 -+++ test/arch/arm/configs/nslu2_defconfig 2005-09-17 16:46:48.000000000 +0200 -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit - # Linux kernel version: 2.6.13.1 --# Sat Sep 17 16:45:18 2005 -+# Sat Sep 17 16:23:38 2005 - # - CONFIG_ARM=y - CONFIG_MMU=y -@@ -120,7 +120,7 @@ - # Processor Features - # - # CONFIG_ARM_THUMB is not set --CONFIG_CPU_BIG_ENDIAN=y -+# CONFIG_CPU_BIG_ENDIAN is not set - CONFIG_XSCALE_PMU=y - CONFIG_DMABOUNCE=y - -@@ -168,6 +168,7 @@ - # At least one emulation must be selected - # - CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set - # CONFIG_FPE_FASTFPE is not set - - # diff --git a/packages/linux/nslu2-kernel/2.6.13/defconfig b/packages/linux/nslu2-kernel/2.6.13/defconfig deleted file mode 100644 index 1124139026..0000000000 --- a/packages/linux/nslu2-kernel/2.6.13/defconfig +++ /dev/null @@ -1,1253 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13.2 -# Fri Sep 23 02:19:35 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -# CONFIG_ARCH_IXDP425 is not set -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set -CONFIG_ARCH_NSLU2=y -# CONFIG_ARCH_PRPMC1100 is not set -# CONFIG_MACH_GTWX5715 is not set - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y -CONFIG_DMABOUNCE=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc noirqdebug console=ttyS0,115200n8" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_HIDP is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_IOP3XX is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_SENSORS_X1205=y -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -# CONFIG_USB_SERIAL_KEYSPAN is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nslu2-kernel/2.6.13/.mtn2git_empty b/packages/linux/nslu2-kernel/2.6.14-mm/.mtn2git_empty index e69de29bb2..e69de29bb2 100644 --- a/packages/linux/nslu2-kernel/2.6.13/.mtn2git_empty +++ b/packages/linux/nslu2-kernel/2.6.14-mm/.mtn2git_empty diff --git a/packages/linux/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch b/packages/linux/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch new file mode 100644 index 0000000000..999b69e851 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch @@ -0,0 +1,10 @@ +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h.orig 2005-11-07 23:16:48.456117450 -0800 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h 2005-11-07 23:16:58.160728123 -0800 +@@ -8,6 +8,7 @@ + #define __ASM_ARCH_MEMORY_H + + #include <asm/sizes.h> ++#include <asm/page.h> + + /* + * Physical DRAM offset. diff --git a/packages/linux/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch b/packages/linux/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch new file mode 100644 index 0000000000..67cbd4cdf4 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch @@ -0,0 +1,1036 @@ +--- linux-2.6.14/drivers/i2c/chips/Kconfig.orig 2005-11-07 22:30:30.413306237 -0800 ++++ linux-2.6.14/drivers/i2c/chips/Kconfig 2005-11-07 22:41:15.785916976 -0800 +@@ -126,13 +126,13 @@ config SENSORS_MAX6875 + This driver can also be built as a module. If so, the module + will be called max6875. + +-config RTC_X1205_I2C +- tristate "Xicor X1205 RTC chip" +- depends on I2C && EXPERIMENTAL +- help +- If you say yes here you get support for the Xicor X1205 RTC chip. ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C ++ help ++ If you say yes here you get support for the Xicor X1205 RTC chip. + +- This driver can also be built as a module. If so, the module +- will be called x1205. ++ This driver can also be built as a module. If so, the module ++ will be called x1205 + + endmenu +--- linux-2.6.14/drivers/i2c/chips/Makefile.orig 2005-11-07 22:30:30.417306489 -0800 ++++ linux-2.6.14/drivers/i2c/chips/Makefile 2005-11-07 22:41:59.616675071 -0800 +@@ -13,7 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591 + obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TPS65010) += tps65010.o +-obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ++obj-$(CONFIG_SENSORS_X1205) += x1205.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +--- linux-2.6.14/drivers/i2c/chips/x1205.c.orig 2005-11-07 22:30:30.421306741 -0800 ++++ linux-2.6.14/drivers/i2c/chips/x1205.c 2005-11-07 22:42:54.960157617 -0800 +@@ -1,14 +1,16 @@ + /* +- * x1205.c - An i2c driver for the Xicor X1205 RTC ++ * linux/drivers/i2c/chips/x1205.c ++ * ++ * x1205.c - An 12c driver for the Xicor X1205 RTC + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * please send all reports to: + * kas11 at tampabay dot rr dot com + * a dot zummo at towertech dot it +- * ++ * + * based on the other drivers in this same directory. +- * ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +@@ -26,83 +28,36 @@ + + #include <linux/x1205.h> + +-#define DRV_VERSION "0.9.9" ++#define EPOCH_1900 1900 ++#define EPOCH_1970 1970 ++ ++#define DRIVER_VERSION "0.9.6" ++#define DRIVER_NAME (x1205_driver.name) + +-/* Addresses to scan: none. This chip is located at +- * 0x6f and uses a two bytes register addressing. +- * Two bytes need to be written to read a single register, +- * while most other chips just require one and take the second +- * one as the data to be written. To prevent corrupting +- * unknown chips, the user must explicitely set the probe parameter. +- */ + +-static unsigned short normal_i2c[] = { I2C_CLIENT_END }; ++/* Addresses to scan */ ++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END }; + + /* Insmod parameters */ + I2C_CLIENT_INSMOD; + I2C_CLIENT_MODULE_PARM(hctosys, + "Set the system time from the hardware clock upon initialization"); + +-/* offsets into CCR area */ +- +-#define CCR_SEC 0 +-#define CCR_MIN 1 +-#define CCR_HOUR 2 +-#define CCR_MDAY 3 +-#define CCR_MONTH 4 +-#define CCR_YEAR 5 +-#define CCR_WDAY 6 +-#define CCR_Y2K 7 +- +-#define X1205_REG_SR 0x3F /* status register */ +-#define X1205_REG_Y2K 0x37 +-#define X1205_REG_DW 0x36 +-#define X1205_REG_YR 0x35 +-#define X1205_REG_MO 0x34 +-#define X1205_REG_DT 0x33 +-#define X1205_REG_HR 0x32 +-#define X1205_REG_MN 0x31 +-#define X1205_REG_SC 0x30 +-#define X1205_REG_DTR 0x13 +-#define X1205_REG_ATR 0x12 +-#define X1205_REG_INT 0x11 +-#define X1205_REG_0 0x10 +-#define X1205_REG_Y2K1 0x0F +-#define X1205_REG_DWA1 0x0E +-#define X1205_REG_YRA1 0x0D +-#define X1205_REG_MOA1 0x0C +-#define X1205_REG_DTA1 0x0B +-#define X1205_REG_HRA1 0x0A +-#define X1205_REG_MNA1 0x09 +-#define X1205_REG_SCA1 0x08 +-#define X1205_REG_Y2K0 0x07 +-#define X1205_REG_DWA0 0x06 +-#define X1205_REG_YRA0 0x05 +-#define X1205_REG_MOA0 0x04 +-#define X1205_REG_DTA0 0x03 +-#define X1205_REG_HRA0 0x02 +-#define X1205_REG_MNA0 0x01 +-#define X1205_REG_SCA0 0x00 +- +-#define X1205_CCR_BASE 0x30 /* Base address of CCR */ +-#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ +- +-#define X1205_SR_RTCF 0x01 /* Clock failure */ +-#define X1205_SR_WEL 0x02 /* Write Enable Latch */ +-#define X1205_SR_RWEL 0x04 /* Register Write Enable */ +- +-#define X1205_DTR_DTR0 0x01 +-#define X1205_DTR_DTR1 0x02 +-#define X1205_DTR_DTR2 0x04 +- +-#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ +- + /* Prototypes */ ++ + static int x1205_attach(struct i2c_adapter *adapter); + static int x1205_detach(struct i2c_client *client); + static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); +-static int x1205_command(struct i2c_client *client, unsigned int cmd, +- void *arg); ++static int x1205_validate_client(struct i2c_client *client); ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base); ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base); ++static int x1205_validate_tm(struct rtc_time *tm); ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); ++static int x1205_hctosys(struct i2c_client *client); ++ + + static struct i2c_driver x1205_driver = { + .owner = THIS_MODULE, +@@ -110,6 +65,7 @@ static struct i2c_driver x1205_driver = + .flags = I2C_DF_NOTIFY, + .attach_adapter = &x1205_attach, + .detach_client = &x1205_detach, ++/* .command = &x1205_command,*/ + }; + + struct x1205_data { +@@ -118,8 +74,9 @@ struct x1205_data { + unsigned int epoch; + }; + +-static const unsigned char days_in_mo[] = +- { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; ++ ++static const unsigned char days_in_mo[] = ++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; + + static LIST_HEAD(x1205_clients); + +@@ -127,6 +84,7 @@ static LIST_HEAD(x1205_clients); + * commands to a specific client. This function will send the command + * to the first client. + */ ++ + int x1205_do_command(unsigned int cmd, void *arg) + { + struct list_head *walk; +@@ -141,114 +99,98 @@ int x1205_do_command(unsigned int cmd, v + return -ENODEV; + } + +-#define is_leap(year) \ +- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) +- +-/* make sure the rtc_time values are in bounds */ +-static int x1205_validate_tm(struct rtc_time *tm) +-{ +- int year = tm->tm_year + 1900; +- +- if ((tm->tm_year < 70) || (tm->tm_year > 255)) +- return -EINVAL; +- +- if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) +- return -EINVAL; +- +- if (tm->tm_mday > days_in_mo[tm->tm_mon] +- + ((tm->tm_mon == 1) && is_leap(year))) +- return -EINVAL; +- +- if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) +- return -EINVAL; +- +- return 0; +-} + + /* +- * In the routines that deal directly with the x1205 hardware, we use ++ * in the routines that deal directly with the x1205 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch +- * Epoch is initialized as 2000. Time is set to UTC. ++ * Epoch is inited as 2000. Time is set to UT + */ ++ + static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, + u8 reg_base) + { +- unsigned char dt_addr[2] = { 0, reg_base }; +- static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; ++ static unsigned char dt_addr[] = { 0, }; ++ static unsigned char sr_addr[] = { 0, }; + +- unsigned char buf[8], sr; ++ unsigned char buf[8], sr; + + struct i2c_msg msgs[] = { +- { client->addr, 0, 2, sr_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 1, &sr }, /* read status */ +- { client->addr, 0, 2, dt_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 8, buf }, /* read date */ ++ { client->addr, 0, 2, sr_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &sr }, ++ { client->addr, 0, 2, dt_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 8, buf }, + }; + +- struct x1205_data *data = i2c_get_clientdata(client); ++ struct x1205_data *xdata = i2c_get_clientdata(client); + +- /* read status register */ +- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } ++ dt_addr[1] = reg_base; ++ sr_addr[1] = X1205_REG_SR; + +- /* check for battery failure */ +- if (sr & X1205_SR_RTCF) { +- dev_warn(&client->dev, +- "Clock had a power failure, you must set the date.\n"); +- return -EINVAL; +- } ++ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) == ++ ARRAY_SIZE(msgs)) { ++ /* did we read the correct number of messages? */ ++ ++ /* check for battery failure */ ++ if (sr & X1205_SR_RTCF) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Clock had a power failure, you must set the date.\n", ++ DRIVER_NAME); + +- /* read date registers */ +- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } +- +- dev_dbg(&client->dev, +- "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " +- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", +- __FUNCTION__, +- buf[0], buf[1], buf[2], buf[3], +- buf[4], buf[5], buf[6], buf[7]); +- +- tm->tm_sec = BCD2BIN(buf[CCR_SEC]); +- tm->tm_min = BCD2BIN(buf[CCR_MIN]); +- tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ +- tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); +- tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); +- data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; +- tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; +- tm->tm_wday = buf[CCR_WDAY]; ++ return -EINVAL; ++ } + +- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " +- "mday=%d, mon=%d, year=%d, wday=%d\n", +- __FUNCTION__, +- tm->tm_sec, tm->tm_min, tm->tm_hour, +- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ dev_dbg(&client->dev, ++ "%s: raw read data - sec-%02x min-%02x hr-%02x" ++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ buf[CCR_HOUR] &= ~X1205_HR_MIL; ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */ ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); ++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900; ++ tm->tm_wday = buf[CCR_WDAY]; ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + ++ } else { ++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ + return 0; + } + ++ + static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, + int datetoo, u8 reg_base) + { + int i, err, xfer; + +- unsigned char buf[8]; ++ static unsigned char wel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL }; + +- static const unsigned char wel[3] = { 0, X1205_REG_SR, +- X1205_SR_WEL }; + +- static const unsigned char rwel[3] = { 0, X1205_REG_SR, +- X1205_SR_WEL | X1205_SR_RWEL }; ++ static unsigned char rwel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL | X1205_SR_RWEL }; + +- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; ++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; + +- struct x1205_data *data = i2c_get_clientdata(client); ++ static unsigned char data[3] = { 0, }; ++ static unsigned char buf[8]; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); + +- /* check if all values in the tm struct are correct */ + if ((err = x1205_validate_tm(tm)) < 0) + return err; + +@@ -258,124 +200,52 @@ static int x1205_set_datetime(struct i2c + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + +- buf[CCR_SEC] = BIN2BCD(tm->tm_sec); +- buf[CCR_MIN] = BIN2BCD(tm->tm_min); + +- /* set hour and 24hr bit */ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ ++ /* Set 24HR format */ + buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + +- /* should we also set the date? */ +- if (datetoo) { +- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ if (datetoo == X1205_DATETOO) { ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + + /* month, 0 - 11 */ +- buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */ + + /* year, since 1900 */ +- buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); +- buf[CCR_WDAY] = tm->tm_wday & 0x07; +- buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); ++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch)); ++ buf[CCR_WDAY] = tm->tm_wday & 7; ++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100); + } + +- /* this sequence is required to unlock the chip */ + xfer = i2c_master_send(client, wel, 3); +- if (xfer != 3) { +- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); ++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) + return -EIO; +- } + + xfer = i2c_master_send(client, rwel, 3); +- if (xfer != 3) { +- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); ++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) + return -EIO; +- } + +- /* write register's data */ +- for (i = 0; i < (datetoo ? 8 : 3); i++) { +- unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; +- +- xfer = i2c_master_send(client, rdata, 3); +- if (xfer != 3) { +- dev_err(&client->dev, +- "%s: xfer=%d addr=%02x, data=%02x\n", +- __FUNCTION__, +- xfer, rdata[1], rdata[2]); ++ for (i = 0; i < 8; i++) { ++ data[1] = i + reg_base; ++ data[2] = buf[i]; ++ xfer = i2c_master_send(client, data, 3); ++ ++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n", ++ __FUNCTION__, ++ xfer, data[1], data[2]); ++ ++ if (xfer != 3) + return -EIO; +- } + }; + +- /* disable further writes */ + xfer = i2c_master_send(client, diswe, 3); +- if (xfer != 3) { +- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); +- return -EIO; +- } +- +- return 0; +-} +- +-static int x1205_get_dtrim(struct i2c_client *client, int *trim) +-{ +- unsigned char dtr; +- static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; +- +- struct i2c_msg msgs[] = { +- { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ +- }; +- +- /* read dtr register */ +- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } +- +- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); +- +- *trim = 0; +- +- if (dtr & X1205_DTR_DTR0) +- *trim += 20; +- +- if (dtr & X1205_DTR_DTR1) +- *trim += 10; +- +- if (dtr & X1205_DTR_DTR2) +- *trim = -*trim; +- +- return 0; +-} +- +-static int x1205_get_atrim(struct i2c_client *client, int *trim) +-{ +- s8 atr; +- static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; +- +- struct i2c_msg msgs[] = { +- { client->addr, 0, 2, atr_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ +- }; +- +- /* read atr register */ +- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } +- +- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); +- +- /* atr is a two's complement value on 6 bits, +- * perform sign extension. The formula is +- * Catr = (atr * 0.25pF) + 11.00pF. +- */ +- if (atr & 0x20) +- atr |= 0xC0; +- +- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); +- +- *trim = (atr * 250) + 11000; +- +- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); ++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; + + return 0; + } +@@ -386,24 +256,28 @@ static int x1205_hctosys(struct i2c_clie + + struct rtc_time tm; + struct timespec tv; ++ + + err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); + +- if (err) { +- dev_err(&client->dev, +- "Unable to set the system clock\n"); ++ if (err) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Unable to set the system clock\n", ++ DRIVER_NAME); ++ + return err; ++ + } + +- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary +- * whether it stores the most close value or the value with partial +- * seconds truncated. However, it is important that we use it to store +- * the truncated value. This is because otherwise it is necessary, +- * in an rtc sync function, to read both xtime.tv_sec and +- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read +- * of >32bits is not possible. So storing the most close value would +- * slow down the sync API. So here we have the truncated value and +- * the best guess is to add 0.5s. ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether ++ * it stores the most close value or the value with partial seconds ++ * truncated, however it is important for x1205_sync_rtc that it be ++ * defined to store the truncated value. This is because otherwise it ++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the ++ * sync function, and atomic reads of >32bits on ARM are not possible. ++ * So storing the most close value would slow down the sync API. So ++ * Here we have the truncated value and the best guess is to add 0.5s + */ + + tv.tv_nsec = NSEC_PER_SEC >> 1; +@@ -413,15 +287,16 @@ static int x1205_hctosys(struct i2c_clie + * the month to be in the range 1-12 + */ + +- tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, ++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, + tm.tm_min, tm.tm_sec); + + do_settimeofday(&tv); + +- dev_info(&client->dev, +- "setting the system clock to %d-%d-%d %d:%d:%d\n", +- tm.tm_year + 1900, tm.tm_mon + 1, ++ dev_info(&client->adapter->dev, ++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n", ++ DRIVER_NAME, ++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, tm.tm_min, + tm.tm_sec); + +@@ -432,7 +307,7 @@ struct x1205_limit + { + unsigned char reg; + unsigned char mask; +- unsigned char min; ++ unsigned char min; + unsigned char max; + }; + +@@ -443,16 +318,34 @@ static int x1205_validate_client(struct + /* Probe array. We will read the register at the specified + * address and check if the given bits are zero. + */ +- static const unsigned char probe_zero_pattern[] = { +- /* register, mask */ ++ ++ const unsigned char probe_zero_pattern[] = { ++ + X1205_REG_SR, 0x18, ++ X1205_REG_Y2K, 0xC6, ++ X1205_REG_DW, 0xF8, ++ X1205_REG_MO, 0xE0, ++ X1205_REG_DT, 0xC0, ++ X1205_REG_HR, 0x40, ++ X1205_REG_MN, 0x80, ++ X1205_REG_SC, 0x80, + X1205_REG_DTR, 0xF8, + X1205_REG_ATR, 0xC0, + X1205_REG_INT, 0x18, + X1205_REG_0, 0xFF, ++ X1205_REG_Y2K1, 0xC6, ++ X1205_REG_DWA1, 0x78, ++ X1205_REG_MOA1, 0x60, ++ X1205_REG_DTA1, 0x40, ++ X1205_REG_HRA1, 0x40, ++ X1205_REG_Y2K0, 0xC6, ++ X1205_REG_DWA0, 0x78, ++ X1205_REG_MOA0, 0x60, ++ X1205_REG_DTA0, 0x40, ++ X1205_REG_HRA0, 0x40, + }; + +- static const struct x1205_limit probe_limits_pattern[] = { ++ const struct x1205_limit probe_limits_pattern[] = { + /* register, mask, min, max */ + { X1205_REG_Y2K, 0xFF, 19, 20 }, + { X1205_REG_DW, 0xFF, 0, 6 }, +@@ -463,23 +356,41 @@ static int x1205_validate_client(struct + { X1205_REG_MN, 0xFF, 0, 59 }, + { X1205_REG_SC, 0xFF, 0, 59 }, + { X1205_REG_Y2K1, 0xFF, 19, 20 }, ++ { X1205_REG_DWA1, 0x7F, 0, 6 }, ++ { X1205_REG_MOA1, 0x7F, 0, 12 }, ++ { X1205_REG_DTA1, 0x7F, 0, 31 }, ++ { X1205_REG_HRA1, 0x7F, 0, 23 }, ++ { X1205_REG_MNA1, 0x7F, 0, 59 }, ++ { X1205_REG_SCA1, 0x7F, 0, 59 }, + { X1205_REG_Y2K0, 0xFF, 19, 20 }, ++ { X1205_REG_DWA0, 0x7F, 0, 6 }, ++ { X1205_REG_MOA0, 0x7F, 0, 12 }, ++ { X1205_REG_DTA0, 0x7F, 0, 31 }, ++ { X1205_REG_HRA0, 0x7F, 0, 23 }, ++ { X1205_REG_MNA0, 0x7F, 0, 59 }, ++ { X1205_REG_SCA0, 0x7F, 0, 59 }, + }; + + /* check that registers have bits a 0 where expected */ +- for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { ++ ++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) ++ { + unsigned char buf; + +- unsigned char addr[2] = { 0, probe_zero_pattern[i] }; ++ static unsigned char addr[2]; + + struct i2c_msg msgs[2] = { +- { client->addr, 0, 2, addr }, ++ { client->addr, 0, 2, addr }, /* random read */ + { client->addr, I2C_M_RD, 1, &buf }, + }; + ++ addr[0] = 0x00; ++ addr[1] = probe_zero_pattern[i]; ++ + xfer = i2c_transfer(client->adapter, msgs, 2); ++ + if (xfer != 2) { +- dev_err(&client->adapter->dev, ++ dev_dbg(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + +@@ -487,42 +398,47 @@ static int x1205_validate_client(struct + } + + if ((buf & probe_zero_pattern[i+1]) != 0) { +- dev_err(&client->adapter->dev, +- "%s: register=%02x, zero pattern=%d, value=%x\n", ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, zero pattern %d: %x\n", + __FUNCTION__, addr[1], i, buf); + + return -ENODEV; + } + } + +- /* check limits (only registers with bcd values) */ +- for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { +- unsigned char reg, value; ++ /* check limits */ + +- unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; ++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) ++ { ++ unsigned char buf, val; ++ ++ static unsigned char addr[2]; + + struct i2c_msg msgs[2] = { +- { client->addr, 0, 2, addr }, +- { client->addr, I2C_M_RD, 1, ® }, ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, + }; + ++ addr[0] = 0x00; ++ addr[1] = probe_limits_pattern[i].reg; ++ + xfer = i2c_transfer(client->adapter, msgs, 2); + + if (xfer != 2) { +- dev_err(&client->adapter->dev, ++ dev_dbg(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + +- value = BCD2BIN(reg & probe_limits_pattern[i].mask); ++ val = BCD2BIN(buf & probe_limits_pattern[i].mask); + +- if (value > probe_limits_pattern[i].max || +- value < probe_limits_pattern[i].min) { ++ if (val > probe_limits_pattern[i].max || ++ val < probe_limits_pattern[i].min) { + dev_dbg(&client->adapter->dev, +- "%s: register=%x, lim pattern=%d, value=%d\n", +- __FUNCTION__, addr[1], i, value); ++ "%s: register %x, lim pattern %d: %d\n", ++ __FUNCTION__, addr[1], i, val); + + return -ENODEV; + } +@@ -538,79 +454,66 @@ static int x1205_attach(struct i2c_adapt + return i2c_probe(adapter, &addr_data, x1205_probe); + } + +-int x1205_direct_attach(int adapter_id, +- struct i2c_client_address_data *address_data) +-{ +- int err; +- struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); +- +- if (adapter) { +- err = i2c_probe(adapter, +- address_data, x1205_probe); +- +- i2c_put_adapter(adapter); +- +- return err; +- } +- +- return -ENODEV; +-} +- + static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) + { +- struct i2c_client *client; +- struct x1205_data *data; ++ struct i2c_client *new_client; ++ struct x1205_data *xdata; + + int err = 0; + + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + +- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { +- err = -ENODEV; +- goto exit; +- } +- +- if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { ++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + +- /* Initialize our structures */ +- data->epoch = 2000; ++ /* Fill our data structure */ + +- client = &data->client; +- client->addr = address; +- client->driver = &x1205_driver; +- client->adapter = adapter; ++ memset(xdata, 0, sizeof(struct x1205_data)); + +- strlcpy(client->name, "x1205", I2C_NAME_SIZE); ++ xdata->epoch = 2000; ++ ++ ++ /* Prepare i2c_client structure */ ++ ++ new_client = &xdata->client; ++ i2c_set_clientdata(new_client, xdata); ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &x1205_driver; ++ new_client->flags = 0; ++ ++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE); + +- i2c_set_clientdata(client, data); + + /* Verify the chip is really an X1205 */ +- if (kind < 0) { +- if (x1205_validate_client(client) < 0) { ++ ++ if (kind < 0) ++ { ++ if (x1205_validate_client(new_client) < 0) { + err = -ENODEV; + goto exit_kfree; + } + } + + /* Inform the i2c layer */ +- if ((err = i2c_attach_client(client))) ++ if ((err = i2c_attach_client(new_client))) + goto exit_kfree; + +- list_add(&data->list, &x1205_clients); ++ list_add(&xdata->list, &x1205_clients); + +- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); ++ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n", ++ DRIVER_NAME); + +- /* If requested, set the system time */ ++ /* If requested, se the system time */ + if (hctosys) +- x1205_hctosys(client); ++ x1205_hctosys(new_client); + + return 0; + + exit_kfree: +- kfree(data); ++ kfree(xdata); + + exit: + return err; +@@ -620,23 +523,44 @@ static int x1205_detach(struct i2c_clien + { + int err; + struct x1205_data *data = i2c_get_clientdata(client); +- ++ + dev_dbg(&client->dev, "%s\n", __FUNCTION__); + + if ((err = i2c_detach_client(client))) + return err; + + list_del(&data->list); +- + kfree(data); ++ return 0; ++} ++ ++/* make sure the rtc_time values are in bounds */ ++static int x1205_validate_tm(struct rtc_time *tm) ++{ ++ tm->tm_year += 1900; ++ ++ if (tm->tm_year < EPOCH_1970) ++ return -EINVAL; ++ ++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) ++ return -EINVAL; ++ ++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && ++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) ++ return -EINVAL; ++ ++ if ((tm->tm_year -= EPOCH_1900) > 255) ++ return -EINVAL; ++ ++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) ++ return -EINVAL; + + return 0; + } + +-static int x1205_command(struct i2c_client *client, unsigned int cmd, +- void *param) ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) + { +- if (param == NULL) ++ if (client == NULL || tm == NULL) + return -EINVAL; + + if (!capable(CAP_SYS_TIME)) +@@ -646,34 +570,26 @@ static int x1205_command(struct i2c_clie + + switch (cmd) { + case X1205_CMD_GETDATETIME: +- return x1205_get_datetime(client, param, X1205_CCR_BASE); ++ return x1205_get_datetime(client, tm, X1205_CCR_BASE); + + case X1205_CMD_SETTIME: +- return x1205_set_datetime(client, param, 0, +- X1205_CCR_BASE); ++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE); + + case X1205_CMD_SETDATETIME: +- return x1205_set_datetime(client, param, 1, +- X1205_CCR_BASE); ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE); + + case X1205_CMD_GETALARM: +- return x1205_get_datetime(client, param, X1205_ALM0_BASE); ++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE); + + case X1205_CMD_SETALARM: +- return x1205_set_datetime(client, param, 1, +- X1205_ALM0_BASE); +- +- case X1205_CMD_GETDTRIM: +- return x1205_get_dtrim(client, param); +- +- case X1205_CMD_GETATRIM: +- return x1205_get_atrim(client, param); ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE); + + default: + return -EINVAL; + } + } + ++ + static int __init x1205_init(void) + { + return i2c_add_driver(&x1205_driver); +@@ -689,10 +605,8 @@ MODULE_AUTHOR( + "Alessandro Zummo <a.zummo@towertech.it>"); + MODULE_DESCRIPTION("Xicor X1205 RTC driver"); + MODULE_LICENSE("GPL"); +-MODULE_VERSION(DRV_VERSION); + + EXPORT_SYMBOL_GPL(x1205_do_command); +-EXPORT_SYMBOL_GPL(x1205_direct_attach); + + module_init(x1205_init); + module_exit(x1205_exit); +--- linux-2.6.14/include/linux/x1205.h.orig 2005-11-07 22:38:42.196252187 -0800 ++++ linux-2.6.14/include/linux/x1205.h 2005-11-07 22:42:54.960157617 -0800 +@@ -1,31 +1,67 @@ +-/* +- * x1205.h - defines for drivers/i2c/chips/x1205.c +- * Copyright 2004 Karen Spearel +- * Copyright 2005 Alessandro Zummo +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- */ +- +-#ifndef __LINUX_X1205_H__ +-#define __LINUX_X1205_H__ + + /* commands */ + +-#define X1205_CMD_GETDATETIME 0 +-#define X1205_CMD_SETTIME 1 +-#define X1205_CMD_SETDATETIME 2 ++#define X1205_CMD_GETDATETIME 0 ++#define X1205_CMD_SETTIME 1 ++#define X1205_CMD_SETDATETIME 2 + #define X1205_CMD_GETALARM 3 + #define X1205_CMD_SETALARM 4 +-#define X1205_CMD_GETDTRIM 5 +-#define X1205_CMD_SETDTRIM 6 +-#define X1205_CMD_GETATRIM 7 +-#define X1205_CMD_SETATRIM 8 ++ ++/* flags */ ++ ++#define X1205_NODATE 0 ++#define X1205_DATETOO 1 ++ ++/* offsets into read buf - add 2 for write buf */ ++ ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_REG_SR 0x3F /* status register */ ++#define X1205_REG_Y2K 0x37 ++#define X1205_REG_DW 0x36 ++#define X1205_REG_YR 0x35 ++#define X1205_REG_MO 0x34 ++#define X1205_REG_DT 0x33 ++#define X1205_REG_HR 0x32 ++#define X1205_REG_MN 0x31 ++#define X1205_REG_SC 0x30 ++#define X1205_REG_DTR 0x13 ++#define X1205_REG_ATR 0x12 ++#define X1205_REG_INT 0x11 ++#define X1205_REG_0 0x10 ++#define X1205_REG_Y2K1 0x0F ++#define X1205_REG_DWA1 0x0E ++#define X1205_REG_YRA1 0x0D ++#define X1205_REG_MOA1 0x0C ++#define X1205_REG_DTA1 0x0B ++#define X1205_REG_HRA1 0x0A ++#define X1205_REG_MNA1 0x09 ++#define X1205_REG_SCA1 0x08 ++#define X1205_REG_Y2K0 0x07 ++#define X1205_REG_DWA0 0x06 ++#define X1205_REG_YRA0 0x05 ++#define X1205_REG_MOA0 0x04 ++#define X1205_REG_DTA0 0x03 ++#define X1205_REG_HRA0 0x02 ++#define X1205_REG_MNA0 0x01 ++#define X1205_REG_SCA0 0x00 ++ ++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */ ++#define X1205_CCR_BASE 0x30 /* Base address of CCR */ ++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ ++ ++#define X1205_SR_RTCF 0x01 ++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */ ++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */ ++ ++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */ + + extern int x1205_do_command(unsigned int cmd, void *arg); +-extern int x1205_direct_attach(int adapter_id, +- struct i2c_client_address_data *address_data); + +-#endif /* __LINUX_X1205_H__ */ diff --git a/packages/linux/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch b/packages/linux/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch new file mode 100644 index 0000000000..116f95b2f7 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch @@ -0,0 +1,20 @@ +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c.orig 2005-11-07 22:26:36.010556202 -0800 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c 2005-11-07 22:27:15.921067613 -0800 +@@ -504,7 +504,7 @@ static int __init n2iom_init(void) + return -EBUSY; + } + else { +- class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); + } + #endif + +@@ -513,7 +513,7 @@ static int __init n2iom_init(void) + return -EBUSY; + } + else { +- class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); + } + + return 0; diff --git a/packages/linux/nslu2-kernel/2.6.14-rc5-mm1/defconfig b/packages/linux/nslu2-kernel/2.6.14-mm/defconfig index a0de10bc91..ecb422f0d7 100644 --- a/packages/linux/nslu2-kernel/2.6.14-rc5-mm1/defconfig +++ b/packages/linux/nslu2-kernel/2.6.14-mm/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc5-mm1 -# Wed Oct 26 21:32:12 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 22:59:39 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -46,8 +46,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set # # Loadable module support @@ -82,6 +84,7 @@ CONFIG_ARCH_IXP4XX=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -342,6 +345,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -929,7 +936,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +CONFIG_SENSORS_X1205=y # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1016,6 +1023,7 @@ CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m +# CONFIG_VIDEO_EM28XX is not set CONFIG_VIDEO_OVCAMCHIP=m # @@ -1189,6 +1197,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices @@ -1286,6 +1295,7 @@ CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m diff --git a/packages/linux/nslu2-kernel/2.6.14/19-jffs2-force-be.patch b/packages/linux/nslu2-kernel/2.6.14/19-jffs2-force-be.patch new file mode 100644 index 0000000000..4406d17857 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.14/19-jffs2-force-be.patch @@ -0,0 +1,13 @@ +--- linux-2.6.14.1/fs/jffs2/nodelist.h.orig 2005-11-09 23:12:29.641449728 -0800 ++++ linux-2.6.14.1/fs/jffs2/nodelist.h 2005-11-09 23:13:19.228570049 -0800 +@@ -44,7 +44,9 @@ + #define D2(x) + #endif + +-#define JFFS2_NATIVE_ENDIAN ++#undef JFFS2_NATIVE_ENDIAN ++#define JFFS2_BIG_ENDIAN 1 ++#undef JFFS2_LITTLE_ENDIAN + + /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from + whatever OS we're actually running on here too. */ diff --git a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch index 7d15e75ed4..038c71c3b3 100644 --- a/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch +++ b/packages/linux/nslu2-kernel/2.6.14/50-nslu2-arch.patch @@ -1,39 +1,33 @@ ---- linux-2.6.13/arch/arm/boot/compressed/head.S 2005-08-28 16:41:01.000000000 -0700 -+++ linux-2.6.13/arch/arm/boot/compressed/head.S 2005-10-26 15:23:39.646352497 -0700 -@@ -37,6 +37,7 @@ - defined(CONFIG_ARCH_INTEGRATOR) || \ - defined(CONFIG_ARCH_PXA) || \ - defined(CONFIG_ARCH_IXP4XX) || \ -+ defined(CONFIG_MACH_NSLU2) || \ - defined(CONFIG_ARCH_IXP2000) || \ - defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) ---- linux-2.6.13/arch/arm/mach-ixp4xx/Kconfig 2005-08-28 16:41:01.000000000 -0700 -+++ linux-2.6.13/arch/arm/mach-ixp4xx/Kconfig 2005-10-26 15:23:39.646352497 -0700 -@@ -43,6 +43,12 @@ config MACH_IXDP465 - IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see <file:Documentation/arm/IXP4xx>. +--- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option -+config MACH_NSLU2 -+ bool "NSLU2" -+ help -+ Say 'Y' here if you want your kernel to support Linksys's -+ NSLU2 NAS device. For more information on this platform, -+ see http://www.nslu2-linux.org + comment "IXP4xx Platforms" - # - # IXCDP1100 is the exact same HW as IXDP425, but with a different machine ---- linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-08-28 16:41:01.000000000 -0700 -+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:39.646352497 -0700 ++# This entry is placed on top because otherwise it would have ++# been shown as a submenu. ++config MACH_NSLU2 ++ bool ++ prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) ++ help ++ Say 'Y' here if you want your kernel to support Linksys's ++ NSLU2 NAS device. For more information on this platform, ++ see http://www.nslu2-linux.org ++ + config ARCH_AVILA + bool "Avila" + help +--- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 @@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o ---- linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-10-26 15:19:43.171472071 -0700 -+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-10-26 15:23:39.646352497 -0700 -@@ -0,0 +1,78 @@ +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-pci.c + * @@ -87,8 +81,7 @@ + + if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && + pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { -+ irq = pci_irq_table[ -+ (slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; ++ irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; + } + + return irq; @@ -112,9 +105,9 @@ +} + +subsys_initcall(nslu2_pci_init); ---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 2005-09-06 00:17:15.000000000 -0700 -+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 2005-10-28 15:50:43.554157030 -0700 -@@ -0,0 +1,94 @@ +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,92 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-power.c + * @@ -122,7 +115,7 @@ + * + * Copyright (C) 2005 Tower Technologies + * -+ * based on nslu2-io.c ++ * based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> @@ -166,8 +159,6 @@ + if (!(machine_is_nslu2())) + return 0; + -+ printk(KERN_INFO "NSLU2: power/reset\n"); -+ + *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ + + set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); @@ -191,7 +182,7 @@ + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + NSLU2_PB_IRQ); + -+ return -EIO; ++ return -EIO; + } + + return 0; @@ -209,8 +200,8 @@ +MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); +MODULE_LICENSE("GPL"); ---- linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-10-26 15:19:43.171472071 -0700 -+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-10-26 15:23:39.646352497 -0700 +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 @@ -0,0 +1,134 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c @@ -224,7 +215,7 @@ + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 -+ * Changed to conform to new style __init ixdp425 kas11 10/22/04 ++ * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include <linux/kernel.h> @@ -346,8 +337,8 @@ + .timer = &ixp4xx_timer, + .init_machine = nslu2_init, +MACHINE_END ---- linux-2.6.13/include/asm-arm/arch-ixp4xx/hardware.h 2005-10-26 15:19:37.451112111 -0700 -+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/hardware.h 2005-10-26 15:23:39.650352748 -0700 +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000 @@ -44,5 +44,6 @@ extern unsigned int processor_id; #include "ixdp425.h" #include "coyote.h" @@ -355,8 +346,8 @@ +#include "nslu2.h" #endif /* _ASM_ARCH_HARDWARE_H */ ---- linux-2.6.13/include/asm-arm/arch-ixp4xx/irqs.h 2005-08-28 16:41:01.000000000 -0700 -+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/irqs.h 2005-10-26 15:23:39.650352748 -0700 +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000 @@ -93,4 +93,11 @@ #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 @@ -369,8 +360,8 @@ +#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 + #endif ---- linux-2.6.13/include/asm-arm/arch-ixp4xx/nslu2.h 2005-10-26 15:19:43.175472322 -0700 -+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/nslu2.h 2005-10-26 15:23:39.650352748 -0700 +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 @@ -0,0 +1,96 @@ +/* + * include/asm-arm/arch-ixp4xx/nslu2.h diff --git a/packages/linux/nslu2-kernel/2.6.14-rc5-mm1/.mtn2git_empty b/packages/linux/nslu2-kernel/files/.mtn2git_empty index e69de29bb2..e69de29bb2 100644 --- a/packages/linux/nslu2-kernel/2.6.14-rc5-mm1/.mtn2git_empty +++ b/packages/linux/nslu2-kernel/files/.mtn2git_empty diff --git a/packages/linux/openslug-kernel-2.6.11.2/anonymiser.patch b/packages/linux/nslu2-kernel/files/anonymiser.patch index 3384b15fe2..3384b15fe2 100644 --- a/packages/linux/openslug-kernel-2.6.11.2/anonymiser.patch +++ b/packages/linux/nslu2-kernel/files/anonymiser.patch diff --git a/packages/linux/nslu2-kernel_2.6.11-mm4.bb b/packages/linux/nslu2-kernel_2.6.11-mm4.bb deleted file mode 100644 index e4ac2b5fb9..0000000000 --- a/packages/linux/nslu2-kernel_2.6.11-mm4.bb +++ /dev/null @@ -1,22 +0,0 @@ -# Kernel for NSLU2 -PR = "r1" -include nslu2-kernel.inc - -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# - -N2K_PATCHES = "\ - file://bootramdisk.patch;patch=1 \ - file://reiser4.patch;patch=1 \ - file://nslu2_2.6.11.patch;patch=1 \ - file://compile-switches.patch;patch=1 \ - file://ixp4xx_copy_from.patch;patch=1 \ - file://anonymiser.patch;patch=1 \ - file://x1205-rtc.c-mm.patch;patch=1 \ -" diff --git a/packages/linux/nslu2-kernel_2.6.11.8.bb b/packages/linux/nslu2-kernel_2.6.11.8.bb deleted file mode 100644 index 7a1a1548e5..0000000000 --- a/packages/linux/nslu2-kernel_2.6.11.8.bb +++ /dev/null @@ -1,3 +0,0 @@ -# Kernel for NSLU2 -PR = "r0" -include nslu2-kernel.inc diff --git a/packages/linux/nslu2-kernel_2.6.12.2.bb b/packages/linux/nslu2-kernel_2.6.12.2.bb deleted file mode 100644 index ef2f1f6b2c..0000000000 --- a/packages/linux/nslu2-kernel_2.6.12.2.bb +++ /dev/null @@ -1,38 +0,0 @@ -# Kernel for NSLU2 -# -# Increment PR_CONFIG for changes to the nslu2-kernel specific -# defconfig (do *NOT* increment anything in here for changes -# to other kernel configs!) -PR_CONFIG = "0" -# -# Increment the number below (i.e. the digits after PR) when -# making changes within this file or for changes to the patches -# applied to the kernel. -PR = "r17.${PR_CONFIG}" - -include nslu2-kernel.inc - -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# - -N2K_PATCHES = "\ - file://nslu2-arch.patch;patch=1 \ - file://x1205-rtc.patch;patch=1 \ - file://ixp4xx-regs.patch;patch=1 \ - file://compile-switches.patch;patch=1 \ - file://ixp4xx_copy_from.patch;patch=1 \ - file://anonymiser.patch;patch=1 \ - file://xscale-reset.patch;patch=1 \ - file://x1205-rtc.c-id.patch;patch=1 \ - file://mtd-shutdown.patch;patch=1 \ - file://missing-exports.patch;patch=1 \ - file://timer.patch;patch=1 \ - file://nslu2-io_rpbutton.patch;patch=1 \ - file://disk_led_blinking.patch;patch=1 \ -" diff --git a/packages/linux/nslu2-kernel_2.6.12.bb b/packages/linux/nslu2-kernel_2.6.12.bb deleted file mode 100644 index 73adf4aab0..0000000000 --- a/packages/linux/nslu2-kernel_2.6.12.bb +++ /dev/null @@ -1,35 +0,0 @@ -# Kernel for NSLU2 -# -# Increment PR_CONFIG for changes to the nslu2-kernel specific -# defconfig (do *NOT* increment anything in here for changes -# to other kernel configs!) -PR_CONFIG = "0" -# -# Increment the number below (i.e. the digits after PR) when -# making changes within this file or for changes to the patches -# applied to the kernel. -PR = "r3.${PR_CONFIG}" - -include nslu2-kernel.inc - -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# - -N2K_PATCHES = "\ - file://nslu2-arch.patch;patch=1 \ - file://x1205-rtc.patch;patch=1 \ - file://ixp4xx-regs.patch;patch=1 \ - file://compile-switches.patch;patch=1 \ - file://ixp4xx_copy_from.patch;patch=1 \ - file://anonymiser.patch;patch=1 \ - file://xscale-reset.patch;patch=1 \ - file://x1205-rtc.c-id.patch;patch=1 \ - file://mtd-shutdown.patch;patch=1 \ - file://timer.patch;patch=1 \ -" diff --git a/packages/linux/nslu2-kernel_2.6.13.2.bb b/packages/linux/nslu2-kernel_2.6.13.2.bb deleted file mode 100644 index 5dcb1a2e9c..0000000000 --- a/packages/linux/nslu2-kernel_2.6.13.2.bb +++ /dev/null @@ -1,37 +0,0 @@ -# Kernel for NSLU2 -# -# Increment PR_CONFIG for changes to the nslu2-kernel specific -# defconfig (do *NOT* increment anything in here for changes -# to other kernel configs!) -PR_CONFIG = "0" -# -# Increment the number below (i.e. the digits after PR) when -# making changes within this file or for changes to the patches -# applied to the kernel. -PR = "r1.${PR_CONFIG}" - -include nslu2-kernel.inc - -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# -# There are no added files no more. -N2K_FILES = "" - -N2K_PATCHES = "\ - file://10-ixp4xx-copy-from.patch;patch=1 \ - file://20-timer.patch;patch=1 \ - file://30-i2c-x1205.patch;patch=1 \ - file://50-nslu2-arch.patch;patch=1 \ - file://50-nslu2-include.patch;patch=1 \ - file://50-nslu2-setup.patch;patch=1 \ - file://55-nslu2-rpbutton.patch;patch=1 \ - file://anonymiser.patch;patch=1 \ -" - -CMDLINE_KERNEL_OPTIONS = "" diff --git a/packages/linux/nslu2-kernel_2.6.14-rc5-mm1.bb b/packages/linux/nslu2-kernel_2.6.14-mm1.bb index 205a57a5f4..39951939d2 100644 --- a/packages/linux/nslu2-kernel_2.6.14-rc5-mm1.bb +++ b/packages/linux/nslu2-kernel_2.6.14-mm1.bb @@ -12,31 +12,24 @@ PR = "r0.${PR_CONFIG}" include nslu2-kernel.inc -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# -# There are no added files no more. -N2K_FILES = "" - +# N2K_PATCHES - full list of patches to apply N2K_PATCHES = "\ + file://00-memory-h-page-shift.patch;patch=1 \ file://90-ixp4xx-pci-le.patch;patch=1 \ file://10-ixp4xx-copy-from.patch;patch=1 \ - file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ - file://15-ixp4xx-writesb-l-w.patch;patch=1 \ - file://16-ixp4xx-ioremap.patch;patch=1 \ + file://10-ixp4xx-le.patch;patch=1 \ file://18-ixp4xx-io-h-addr.patch;patch=1 \ + file://19-jffs2-force-be.patch;patch=1 \ file://20-timer.patch;patch=1 \ - file://25-nslu2-arch-reset.patch;patch=1 \ - file://28-spinlock-up.patch;patch=1 \ file://29-ipv4-route-c-spinlock.patch;patch=1 \ + file://30-i2c-x1205-mm1.patch;patch=1 \ file://50-nslu2-arch.patch;patch=1 \ + file://55-nslu2-rtc.patch;patch=1 \ file://60-nslu2-beeper.patch;patch=1 \ + file://70-nslu2-io.patch;patch=1 \ file://75-nslu2-leds.patch;patch=1 \ + file://80-nslu2-class-device-create.patch;patch=1 \ + file://90-pegasus.patch;patch=1 \ file://anonymiser.patch;patch=1 \ " diff --git a/packages/linux/nslu2-kernel_2.6.14.bb b/packages/linux/nslu2-kernel_2.6.14.1.bb index 122e88de6d..6287c596b0 100644 --- a/packages/linux/nslu2-kernel_2.6.14.bb +++ b/packages/linux/nslu2-kernel_2.6.14.1.bb @@ -3,26 +3,16 @@ # Increment PR_CONFIG for changes to the nslu2-kernel specific # defconfig (do *NOT* increment anything in here for changes # to other kernel configs!) -PR_CONFIG = "1" +PR_CONFIG = "0" # # Increment the number below (i.e. the digits after PR) when # making changes within this file or for changes to the patches # applied to the kernel. -PR = "r3.${PR_CONFIG}" +PR = "r0.${PR_CONFIG}" include nslu2-kernel.inc -# N2K_EXTRA_PATCHES - list of patches to apply (can include -# patches to the files installed above) -# N2K_PATCHES - full list of patches to apply, defaults to: -# file://nslu2_2.6.11.patch;patch=1 -# file://usbnet.patch;patch=1 -# file://ixp4xx_copy_from.patch;patch=1 -# ${N2K_EXTRA_PATCHES} -# -# There are no added files no more. -N2K_FILES = "" - +# N2K_PATCHES - full list of patches to apply N2K_PATCHES = "\ file://90-ixp4xx-pci-le.patch;patch=1 \ file://10-ixp4xx-copy-from.patch;patch=1 \ @@ -30,8 +20,8 @@ N2K_PATCHES = "\ file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ file://15-ixp4xx-writesb-l-w.patch;patch=1 \ file://18-ixp4xx-io-h-addr.patch;patch=1 \ + file://19-jffs2-force-be.patch;patch=1 \ file://20-timer.patch;patch=1 \ - file://28-spinlock-up.patch;patch=1 \ file://29-ipv4-route-c-spinlock.patch;patch=1 \ file://30-i2c-x1205.patch;patch=1 \ file://50-nslu2-arch.patch;patch=1 \ diff --git a/packages/linux/openslug-kernel-2.6.11.2/.mtn2git_empty b/packages/linux/openslug-kernel-2.6.11.2/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/openslug-kernel-2.6.11.2/defconfig b/packages/linux/openslug-kernel-2.6.11.2/defconfig deleted file mode 100644 index c14c06c32c..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/defconfig +++ /dev/null @@ -1,1305 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.11.2 -# Sat Jun 18 15:52:14 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -# CONFIG_ARCH_IXDP425 is not set -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set -CONFIG_ARCH_NSLU2=y -# CONFIG_ARCH_PRPMC1100 is not set -# CONFIG_MACH_GTWX5715 is not set - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y -CONFIG_DMABOUNCE=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# General setup -# -CONFIG_PCI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -# CONFIG_XIP_KERNEL is not set -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PC-card bridges -# - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -CONFIG_PM=y -# CONFIG_PREEMPT is not set -CONFIG_APM=y -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc reboot=s console=ttyS0,115200n8" -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -# CONFIG_MD_LINEAR is not set -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -# CONFIG_IP_VS_PROTO_TCP is not set -# CONFIG_IP_VS_PROTO_UDP is not set -# CONFIG_IP_VS_PROTO_ESP is not set -# CONFIG_IP_VS_PROTO_AH is not set - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -# CONFIG_IP_VS_SED is not set -# CONFIG_IP_VS_NQ is not set - -# -# IPVS application helper -# -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_HFSC is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_NETEM is not set -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_HIDP is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_ETHERTAP is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_IOP3XX is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_SENSORS_X1205=y -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_DPC is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# Misc devices -# - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=m -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_AUDIO=m - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -# CONFIG_USB_MIDI is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_TEST is not set - -# -# USB ATM/DSL drivers -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch b/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch deleted file mode 100644 index 8d0f187d44..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/ixp4xx_copy_from.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- linux-2.6.11/drivers/mtd/maps/ixp4xx.c.orig 2005-03-05 20:00:28.000000000 +0100 -+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-03-05 22:10:48.000000000 +0100 -@@ -29,6 +29,8 @@ - #include <asm/mach-types.h> - #include <asm/mach/flash.h> - -+#include <asm/unaligned.h> -+ - #include <linux/reboot.h> - - #ifndef __ARMEB__ -@@ -60,13 +62,13 @@ static void ixp4xx_copy_from(struct map_ - u16 data; - - for (i = 0; i < (len / 2); i++) { -- data = src[i]; -+ data = get_unaligned((u16*)(src + i)); - dest[i * 2] = BYTE0(data); - dest[i * 2 + 1] = BYTE1(data); - } - - if (len & 1) -- dest[len - 1] = BYTE0(src[i]); -+ dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i))); - } - - /* diff --git a/packages/linux/openslug-kernel-2.6.11.2/mtd-shutdown.patch b/packages/linux/openslug-kernel-2.6.11.2/mtd-shutdown.patch deleted file mode 100644 index e7cce4ebc0..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/mtd-shutdown.patch +++ /dev/null @@ -1,66 +0,0 @@ -# Ensure that the MTD is shut down on halt/reboot, otherwise the -# hardware reset hangs - ---- linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c.orig 2005-07-17 15:07:47.790388300 -0700 -+++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-07-17 17:00:08.082672710 -0700 -@@ -144,6 +144,52 @@ - return 0; - } - -+static void ixp4xx_flash_shutdown(struct device *_dev) -+{ -+ struct platform_device *dev = to_platform_device(_dev); -+ struct flash_platform_data *plat = dev->dev.platform_data; -+ struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev); -+ map_word d; -+ -+ dev_set_drvdata(&dev->dev, NULL); -+ -+ if(!info) -+ return; -+ -+ /* -+ * This is required for a soft reboot to work. -+ */ -+ d.x[0] = 0xff; -+ ixp4xx_write16(&info->map, d, 0x55 * 0x2); -+ -+#if 0 -+ /* This is commented out because it seems to cause a kernel -+ * panic (at least if it isn't commented out the kernel fails -+ * to shut down). Should be investigated. -+ */ -+ if (info->mtd) { -+ del_mtd_partitions(info->mtd); -+ map_destroy(info->mtd); -+ } -+#endif -+ if (info->map.map_priv_1) -+ iounmap((void *) info->map.map_priv_1); -+ -+ if (info->partitions) -+ kfree(info->partitions); -+ -+ if (info->res) { -+ release_resource(info->res); -+ kfree(info->res); -+ } -+ -+ if (plat->exit) -+ plat->exit(); -+ -+ /* Disable flash write */ -+ *IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE; -+} -+ - static int ixp4xx_flash_probe(struct device *_dev) - { - struct platform_device *dev = to_platform_device(_dev); -@@ -243,6 +289,7 @@ - .bus = &platform_bus_type, - .probe = ixp4xx_flash_probe, - .remove = ixp4xx_flash_remove, -+ .shutdown = ixp4xx_flash_shutdown, - }; - - static int __init ixp4xx_flash_init(void) diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c deleted file mode 100644 index d27b6732b0..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-io.c +++ /dev/null @@ -1,777 +0,0 @@ -//============================================================================= -// -// n2-io.c version 0.1.7 -// Author: Karen Spearel <kas11 at tampabay.rr.com> -// please report problems/bugs directly to the address above -// -// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per -// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk -// -// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, -// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT -// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER -// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. -// -//============================================================================= -// GPIO Function State -// 0 Red LED Status -// 1 Green LED Ready = 1 -// 2 Disk 2 LED On = 0 -// 3 Disk 1 LED On = 0 -// 4 Buzzer -// 5 Power Button Pressed = 1 -// 8 Power Down Output = 1 powers down N2 -// 12 Reset Pressed = 0 -//============================================================================= -// this driver is N2 specific and is purposely designed to do the minimum -// necessary to provide the necessary services given the limited memory resources -// of the N2. As OpenN2 develops, addition features will be added as -// suggested by the community. -// -//============================================================================= - -#include <linux/config.h> -#include <linux/version.h> -#include <linux/module.h> -#include <linux/utsname.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/miscdevice.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> -#include <linux/reboot.h> - -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/hardware.h> -#include <asm-arm/irq.h> -#include <asm-arm/delay.h> -#include <asm-arm/signal.h> - -/* Set this to 1 to output lots of debug messages. */ -#if NSLU2_IO_DEBUG -#define nslu2_io_debug(args) printk args -#else -#define nslu2_io_debug(args) ((void)0) -#endif - -#define VERSION "0.1.7" - -#define N2RB_MAJOR 60 //rbuttons -#define N2PB_MAJOR 61 //pbuttons -#define N2BZ_MAJOR 62 //buzzer -#define N2LM_MAJOR 126 - -#define N2PB_IRQ 22 //gpio5 -#define N2RB_IRQ 29 //gpio12 - -#define N2_BEEP_DUR_LONG 2000 -#define N2_BEEP_DUR_MED 400 -#define N2_BEEP_DUR_SHORT 100 -#define N2_BEEP_PITCH_HIGH 250 -#define N2_BEEP_PITCH_MED 500 -#define N2_BEEP_PITCH_LOW 1000 -#define N2_LONG_DELAY 30000 - -#define N2_BZ_GPIO 4 -#define N2_PB_GPIO 5 -#define N2_PO_GPIO 8 //power off -#define N2_RB_GPIO 12 - -#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 -#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 -#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 - -#define NOERR 0 - -#define RB_DELAY 50 -#define PB_DELAY 20 - -#define PWR_OFF_STR "poweroff" - - -// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe - -#define N2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible -#define N2BZ_BEEP _IO('M',1) //one beep at current defaults -#define N2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults -#define N2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 -#define N2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies -#define N2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies -#define N2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever -#define N2BZ_COMBINED _IOW('M',8,long) //combine all params in a long - -#define N2LM_OFF _IOW('M',32,long) -#define N2LM_ON _IOW('M',33,long) -#define N2LM_BLINK _IOW('M',34,long) -#define N2LM_ALT _IOW('M',35,long) -#define N2LM_ALL_ON _IO('M',36) -#define N2LM_ALL_OFF _IO('M',37) - -#define PHYS_LEDS 4 -#define BLINK_DELAY 25 - -// OR Masks to turn these LEDs ON - -#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 -#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 -#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 - -// AND Masks to turn these LEDs OFF - -#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 -#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 -#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 - -// AND Masks to turn these LEDs ON - -#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 -#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 - -// Or Masks to turn these LEDs OFF - -#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 -#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 - -// EOR masks for toggling LEDs on/off - -#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits -#define RS_GRN_TGL 0x00000002 -#define RS_RED_TGL 0x00000001 -#define DISK1_TGL 0x00000008 -#define DISK2_TGL 0x00000004 - -// The LED names for switches - -#define LED_RS_RED 0 -#define LED_RS_GRN 1 -#define LED_DISK1 2 -#define LED_DISK2 3 -#define LED_ALL 4 - -static unsigned long init_jiffy = 0; //jiffies at init time -static unsigned long rb_presses = 0; //number of reset button presses -static unsigned long ontime = 50; -static unsigned long offtime = 450; -static unsigned long bz_repeatcnt = 10; -static unsigned long tone = 1000; - -DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); -DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); - -static struct timer_list n2lm_rsg_timer; //rs green -static struct timer_list n2lm_rsr_timer; //rs red -static struct timer_list n2lm_d1_timer; //drive 1 -static struct timer_list n2lm_d2_timer; //drive 2 -static struct timer_list n2rb_timer; -static struct timer_list n2pb_timer; -static struct timer_list n2bz_timer; //beeper - -// sysfs class -static struct class_simple *n2lm_class; - -//================================================================================================== -// -// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the -// GPIO output register is xor'd with a mask corresponding to the selected led which simply -// flips that bit. No record of what any of the other leds is doing is needed. -// -//================================================================================================== -// this blinks rs green or green/yellow if rs red is on -static void n2lm_rsg_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led - n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout - add_timer(&n2lm_rsg_timer); //reinit timer - return; -} - -// this blinks or alternates rs red green... inited wit green on/red off -static void n2lm_rsr_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; - n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsr_timer); - return; -} -// blinks disk 1 -static void n2lm_d1_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; - n2lm_d1_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d1_timer); - return; -} -// blinks disk 2 -static void n2lm_d2_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; - n2lm_d2_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d2_timer); - return; -} - -//================================================================================================== - -static void n2lm_timer_start(unsigned long led) -{ - - nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); - - switch(led) { - case LED_RS_RED: - n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsr_timer); - break; - - case LED_RS_GRN: - n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsg_timer); - break; - - case LED_DISK1: - n2lm_d1_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d1_timer); - break; - - case LED_DISK2: - n2lm_d2_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d2_timer); - break; - - default: - break; - } - return; -} - -//================================================================================================== - -static void n2lm_timer_stop(unsigned long led) -{ - switch (led) { - case LED_RS_RED: - del_timer(&n2lm_rsr_timer); - break; - case LED_RS_GRN: - del_timer(&n2lm_rsg_timer); - break; - case LED_DISK1: - del_timer(&n2lm_d1_timer); - break; - case LED_DISK2: - del_timer(&n2lm_d2_timer); - break; - default: - break; - } - return; -} - -//-------------------------------------------------------------------------------------------------- - -static void n2lm_timer_stop_all(void) -{ - del_timer(&n2lm_rsg_timer); - del_timer(&n2lm_rsr_timer); - del_timer(&n2lm_d1_timer); - del_timer(&n2lm_d2_timer); - return; -} -//-------------------------------------------------------------------------------------------------- - -static void n2lm_ledon(unsigned long led) -{ - - nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); - - switch (led) { - case LED_RS_RED: - *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 - return; - case LED_RS_GRN: - *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 - return; - case LED_DISK1: - *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 - return; - case LED_DISK2: - *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb - return; - case LED_ALL: //all green - *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; - *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); - return; - } -} - -//-------------------------------------------------------------------------------------------------- - -static void n2lm_ledoff(unsigned long led) -{ - - switch (led) { - case LED_RS_RED: - *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe - return; - case LED_RS_GRN: - *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd - return; - case LED_DISK1: - *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 - return; - case LED_DISK2: - *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 - return; - case LED_ALL: - *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); - *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); - } -} - -//================================================================================================== - -static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) -{ - - nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); - - if (led < 0 || led >= PHYS_LEDS) - return -EINVAL; - - switch (cmd ) { - case N2LM_ON: - n2lm_timer_stop(led); - n2lm_ledon(led); - break; - - case N2LM_OFF: - n2lm_timer_stop(led); - n2lm_ledoff(led); - break; - - case N2LM_BLINK: - n2lm_ledon(led); - if (led == LED_RS_RED) - n2lm_rsr_timer.data = RS_RED_TGL; - n2lm_timer_start(led); - break; - - case N2LM_ALT: - if (led == LED_RS_RED) - { - n2lm_ledon(LED_RS_GRN); - n2lm_ledoff(LED_RS_RED); - n2lm_rsr_timer.data = RS_RG_ALT; - n2lm_timer_start(LED_RS_RED); - break; - } else - return -EINVAL; - - case N2LM_ALL_ON: - n2lm_timer_stop_all(); - n2lm_ledon(LED_ALL); - break; - - case N2LM_ALL_OFF: - n2lm_timer_stop_all(); - n2lm_ledoff(LED_ALL); - break; - - default: - return -EINVAL; - } - - return NOERR; -} - -static struct file_operations n2lm_fops = { - .owner = THIS_MODULE, - .ioctl = n2lm_ioctl, -}; -//================================================================================================== -// We can't do anything fancy here since the system tick rate is far below that required to -// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until -// I get up to speed on the timers. The saving grace is that for the normal uses, nothing -// important should be haprepening. -//================================================================================================== - -static void n2_buzz(int tone_delay, int duration) -{ - int i; - - *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; - - for (i = 1; i < duration; i++) { - *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; - udelay(tone_delay); - *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; - udelay(tone_delay); - } - *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; - - return; -} -//================================================================================================= - -// this handles the buzzer duty cycle -static void n2bz_handler(unsigned long data) -{ - if (--bz_repeatcnt > 0) { //if just one beep left to do - n2bz_timer.expires = jiffies + ontime + offtime; //next timeout - add_timer(&n2bz_timer); //reinit timer - } - n2_buzz(tone/2, ontime); - nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); - return; -} - -//================================================================================================== - -static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) -{ - switch (cmd) { - case N2BZ_BEEP: - n2_buzz(tone/2, ontime); - break; - - case N2BZ_BEEP_STOP: - del_timer(&n2bz_timer); - break; - - case N2BZ_BEEPS: - if (param == 0) - bz_repeatcnt = 0xffffffff; - else - bz_repeatcnt = param; - n2bz_handler(0); - break; - - case N2BZ_TONESET: - if (param >= 250 && param <= 2000) - tone = param; - break; - - case N2BZ_ONTIME: - if (param > 4 && param < 201) - ontime = param; - break; - - case N2BZ_SILENTTIME: - if (param > ontime) //enforce a reasonable duty cycle - offtime = param; - else - offtime = ontime; - break; - - case N2BZ_REPEATCNT: - if (param == 0) - bz_repeatcnt = 0xffffffff; - else - bz_repeatcnt = param; - break; - - case N2BZ_COMBINED: - bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 - ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies - offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies - tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 - break; - - default: - break; - } - return NOERR; -} - -static struct file_operations n2bz_fops = { - .owner = THIS_MODULE, - .ioctl = n2bz_ioctl, -}; - -//================================================================================================== - -static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) -{ - void *ret; - - wake_up(&n2pb_waitq); - remove_proc_entry(PWR_OFF_STR, NULL); //no parent - n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); - ret = create_proc_entry(PWR_OFF_STR, 0, NULL); - nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); - -// WARNING: This is RUDE...it unconditionally pulls the power plug. -// Your data will be at risk...since this is just a test system -// I am leaving it enabled...eventually userland needs to get the -// message, do an orderly shutdown and use an ioctl or something in -// /proc/powerdowm to actually have us pull the plug. - - machine_power_off(); - - return IRQ_HANDLED; -} - -//================================================================================================== -// -//static void do_rb_timeout(unsigned long data) -//{ -// int i; -// -// for (i = 0; i < rb_presses; i++) -// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); -// return; -//} -// -//================================================================================================== -// does nothing -- waiting for userland to define -// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so -// we hang in a loop until the button is no longer pressed - -struct testr { - int ctl; - long param; -}; - -static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) -{ - - static struct testr test[] = { - { N2LM_ALL_OFF,0 }, - { N2LM_ON,0 }, - { N2LM_OFF,0 }, - { N2LM_ON,1 }, - { N2LM_ALL_OFF,1 }, - { N2LM_ON,2 }, - { N2LM_OFF,2 }, - { N2LM_ON,3 }, - { N2LM_OFF,3 }, - { N2LM_BLINK,0 }, - { N2LM_OFF,0 }, - { N2LM_BLINK,1 }, - { N2LM_OFF,1 }, - { N2LM_BLINK,2 }, - { N2LM_OFF,2 }, - { N2LM_BLINK,3 }, - { N2LM_OFF,3 }, - { N2LM_ALL_OFF,0 }, - { N2LM_ALT,1 }, - { N2LM_OFF,1 }, - { N2LM_ALL_ON,0 } - }; - - nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); - - wake_up(&n2rb_waitq); - while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) - ; //wait for button release - - if (rb_presses > 20) - rb_presses = 0; - tone = (rb_presses * 50) + 200; - ontime = (rb_presses*10) + 100; - offtime = 500 - (rb_presses*20); - nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); - rb_presses++; - - n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); - n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); -// if (rb_presses == 0) { -// init_jiffy = jiffies; -// init_timer (&n2rb_timer); -// n2rb_timer.function = do_rb_timeout; -// }; -// -// if (rb_presses == 8) -// rb_presses = 0; -// if (rb_presses & 1) -// n2lm_ledon(test[rb_presses]); -// else -// n2lm_ledoff(test[rb_presses]); -// -// n2rb_timer.expires = (jiffies + RB_DELAY); -// add_timer (&n2rb_timer); -// if (rb_presses < 5) { -// if (rb_presses > 0) -// n2lm_ledoff(rb_presses); -// n2lm_ledon(++rb_presses); -// n2lm_timer_start(rb_presses); -// }; - - nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); - return IRQ_HANDLED; - -} - -//================================================================================================== -// What to do here is majorly undetermined... - -static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -{ - printk(KERN_DEBUG "Reset Button Wait\n"); - interruptible_sleep_on(&n2rb_waitq); - return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; - -} - -//================================================================================================== -// What to do here is majorly undetermined... - -static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -{ - printk(KERN_DEBUG "Power Button Wait\n"); - interruptible_sleep_on(&n2pb_waitq); - return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; - -} - -//-------------------------------------------------------------------------------------------------- - -static struct file_operations n2rb_fops = { - .owner = THIS_MODULE, - .read = n2rb_read, -}; - -//-------------------------------------------------------------------------------------------------- - -static struct file_operations n2pb_fops = { - .owner = THIS_MODULE, - .read = n2pb_read, -}; - -//================================================================================================== - -static void n2iom_initarch(void) -{ - printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); - - *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr - gpio_line_config(N2_RB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_isr_clear(N2_RB_GPIO); - gpio_line_config(N2_PB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_HIGH); - gpio_line_isr_clear(N2_PB_GPIO); - - init_timer(&n2lm_rsg_timer); - init_timer(&n2lm_rsr_timer); - init_timer(&n2lm_d1_timer); - init_timer(&n2lm_d2_timer); -// init_timer(&n2rb_timer); -// init_timer(&n2pb_timer); - init_timer(&n2bz_timer); - n2lm_rsr_timer.function = n2lm_rsr_handler; - n2lm_rsg_timer.function = n2lm_rsg_handler; - n2lm_d2_timer.function = n2lm_d2_handler; - n2lm_d1_timer.function = n2lm_d1_handler; - n2bz_timer.function = n2bz_handler; - n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; - - *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 - *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds - *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; - n2lm_ledon(LED_ALL); - n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_SHORT); - n2lm_ledoff(LED_ALL); -// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit - n2lm_ledon(LED_RS_RED); - - return; -} - -//================================================================================================== - -static int __init n2iom_init(void) -{ - printk(KERN_INFO "OpenN2 Misc I/O Driver Version %s\n", VERSION); - - init_jiffy = jiffies; - printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); - n2iom_initarch(); - - n2lm_class = class_simple_create(THIS_MODULE, "nslu2"); - - if (register_chrdev(N2RB_MAJOR, "n2_rbm", &n2pb_fops) < NOERR) { - printk(KERN_DEBUG "Reset Button Major %d not available\n", N2RB_MAJOR); - return -EBUSY; - } - else { - class_simple_device_add(n2lm_class, MKDEV(N2RB_MAJOR, 0), NULL, "rbuttons"); - } - if (register_chrdev(N2PB_MAJOR, "n2_pbm", &n2rb_fops) < NOERR) { - printk(KERN_DEBUG "Power Button Major %d not available\n", N2PB_MAJOR); - return -EBUSY; - } - else { - class_simple_device_add(n2lm_class, MKDEV(N2PB_MAJOR, 0), NULL, "pbuttons"); - } - if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { - printk(KERN_DEBUG "Led Manager Major %d not available\n", N2LM_MAJOR); - return -EBUSY; - } - else { - class_simple_device_add(n2lm_class, MKDEV(N2LM_MAJOR, 0), NULL, "leds"); - } - if (register_chrdev(N2BZ_MAJOR, "n2_bzm", &n2bz_fops) < NOERR) { - printk(KERN_DEBUG "Buzzer Major %d not available\n", N2BZ_MAJOR); - return -EBUSY; - } - else { - class_simple_device_add(n2lm_class, MKDEV(N2BZ_MAJOR, 0), NULL, "buzzer"); - } - - if (request_irq(N2RB_IRQ, &n2rb_handler, SA_INTERRUPT, "n2_rb", NULL) < NOERR) { - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", N2RB_IRQ); - return -EIO; - } - if (request_irq(N2PB_IRQ, &n2pb_handler, SA_INTERRUPT, "n2_pb", NULL) < NOERR) { - printk(KERN_DEBUG "Power Button IRQ %d not available\n", N2PB_IRQ); - return -EIO; - } - - enable_irq(N2PB_IRQ); - enable_irq(N2RB_IRQ); - return (NOERR); -} - -//================================================================================================== - -static void __exit n2iom_exit(void) -{ - remove_proc_entry(PWR_OFF_STR, NULL); - del_timer(&n2rb_timer); - free_irq(N2RB_IRQ,NULL); - unregister_chrdev(N2PB_MAJOR, "n2pb"); - class_simple_device_remove(MKDEV(N2PB_MAJOR, 0)); - del_timer(&n2pb_timer); - free_irq(N2PB_IRQ, NULL); - unregister_chrdev(N2RB_MAJOR, "n2rb" ); - class_simple_device_remove(MKDEV(N2RB_MAJOR, 0)); - del_timer(&n2lm_rsg_timer); - del_timer(&n2lm_rsr_timer); - del_timer(&n2lm_d1_timer); - del_timer(&n2lm_d2_timer); - unregister_chrdev(N2LM_MAJOR, "n2lm" ); - class_simple_device_remove(MKDEV(N2LM_MAJOR, 0)); - unregister_chrdev(N2BZ_MAJOR, "n2bz"); - class_simple_device_remove(MKDEV(N2BZ_MAJOR, 0)); - class_simple_destroy(n2lm_class); -} - -module_init (n2iom_init); -module_exit (n2iom_exit); - -MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -MODULE_DESCRIPTION("OpenN2 Buttons/LEDs IO Driver"); -MODULE_LICENSE("GPL"); -static int debug = 7; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debugging enabled = 8"); - diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c deleted file mode 100644 index 6fbf952e2a..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-part.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * nslu2-part.c - * - * Maintainers: http://www.nslu2-linux.org/ - * Initial port: Mark Rakes <mrakes AT mac.com> - * - * "Parse" the fixed partition table of the Linksys NSLU2 and - * produce a Linux partition array to match. - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -/* info we know about the NSLU2's flash setup: - * - * Num Partition offset size - * --- --------- ---------- ----------- - * 0 RedBoot 0x00000000 0x00040000 - * 1 System Configuration 0x00040000 0x00020000 - * 2 Kernel 0x00060000 0x00100000 - * 3 Ramdisk 0x00160000 0x006a0000 - */ - #define NSLU2_NUM_FLASH_PARTITIONS 4 - #define NSLU2_FLASH_PART0_NAME "RedBoot" - #define NSLU2_FLASH_PART0_OFFSET 0x00000000 - #define NSLU2_FLASH_PART0_SIZE 0x00040000 - #define NSLU2_FLASH_PART1_NAME "System Configuration" - #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) - #define NSLU2_FLASH_PART1_SIZE 0x00020000 - #define NSLU2_FLASH_PART2_NAME "Kernel" - #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) - #define NSLU2_FLASH_PART2_SIZE 0x00100000 - #define NSLU2_FLASH_PART3_NAME "Ramdisk" - #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) - #define NSLU2_FLASH_PART3_SIZE 0x006a0000 - -static int parse_nslu2_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long flash_start) -{ - struct mtd_partition *parts; - int ret = 0, namelen = 0; - char *names; - - namelen = strlen(NSLU2_FLASH_PART0_NAME) + - strlen(NSLU2_FLASH_PART1_NAME) + - strlen(NSLU2_FLASH_PART2_NAME) + - strlen(NSLU2_FLASH_PART3_NAME) + - NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ - - parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); - if (!parts) { - ret = -ENOMEM; - goto out; - } - - memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); - names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; - - /* RedBoot partition */ - parts[0].size = NSLU2_FLASH_PART0_SIZE; - parts[0].offset = NSLU2_FLASH_PART0_OFFSET; - parts[0].name = NSLU2_FLASH_PART0_NAME; - parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART0_NAME); - names += strlen(names)+1; - /* System Configuration */ - parts[1].size = NSLU2_FLASH_PART1_SIZE; - parts[1].offset = NSLU2_FLASH_PART1_OFFSET; - parts[1].name = NSLU2_FLASH_PART1_NAME; - parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART1_NAME); - names += strlen(names)+1; - /* Kernel */ - parts[2].size = NSLU2_FLASH_PART2_SIZE; - parts[2].offset = NSLU2_FLASH_PART2_OFFSET; - parts[2].name = NSLU2_FLASH_PART2_NAME; - parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART2_NAME); - names += strlen(names)+1; - /* Ramdisk */ - parts[3].size = NSLU2_FLASH_PART3_SIZE; - parts[3].offset = NSLU2_FLASH_PART3_OFFSET; - parts[3].name = NSLU2_FLASH_PART3_NAME; - parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART3_NAME); - names += strlen(names)+1; - - ret = NSLU2_NUM_FLASH_PARTITIONS; - *pparts = parts; - out: - return ret; -} - -static struct mtd_part_parser nslu2_parser = { - .owner = THIS_MODULE, - .parse_fn = parse_nslu2_partitions, - .name = "NSLU2", -}; - -static int __init nslu2_parser_init(void) -{ - return register_mtd_parser(&nslu2_parser); -} - -static void __exit nslu2_parser_exit(void) -{ - deregister_mtd_parser(&nslu2_parser); -} - -module_init(nslu2_parser_init); -module_exit(nslu2_parser_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mark Rakes"); -MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c deleted file mode 100644 index 7327c65a4f..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-pci.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-pci.c - * - * NSLU2 board-level PCI initialization - * - * based on ixdp425-pci.c: - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -// However, all the common PCI setup code presumes the standard 4 PCI -// interrupts are available. So we compromise...we don't enable the -// IRQ on Pin 8 but we let - -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/delay.h> - -#include <asm/mach/pci.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> - -void __init nslu2_pci_preinit(void) -{ - gpio_line_config(NSLU2_PCI_INTA_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(NSLU2_PCI_INTB_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(NSLU2_PCI_INTC_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -// gpio_line_config(NSLU2_PCI_INTD_PIN, -// IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - - gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); -// gpio_line_isr_clear(NSLU2_PCI_INTD_PIN); - - ixp4xx_pci_preinit(); -} - -static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { - IRQ_NSLU2_PCI_INTA, - IRQ_NSLU2_PCI_INTB, - IRQ_NSLU2_PCI_INTC, -// IRQ_NSLU2_PCI_INTD - }; - - int irq = -1; - - if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && - pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11 - } - - return irq; -} - -struct hw_pci __initdata nslu2_pci = { - .nr_controllers = 1, - .preinit = nslu2_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, - .map_irq = nslu2_map_irq, -}; - -int __init nslu2_pci_init(void) //monkey see, monkey do -{ - if (machine_is_nslu2()) - pci_common_init(&nslu2_pci); - return 0; -} - -subsys_initcall(nslu2_pci_init); - diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c deleted file mode 100644 index 358c58f22e..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-setup.c - * - * NSLU2 board-setup - * - * based ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Author: Mark Rakes <mrakes at mac.com> - * Maintainers: http://www.nslu2-linux.org/ - * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#ifdef __ARMEB__ -#define REG_OFFSET 3 -#else -#define REG_OFFSET 0 -#endif - -/* - * NSLU2 uses only one serial port - */ -static struct uart_port nslu2_serial_ports[] = { - { - .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART1_BASE_PHYS), - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 32 - } -#if 0 - , { - .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART2_BASE_PHYS), - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 1, - .type = PORT_XSCALE, - .fifosize = 32 - } -#endif -}; - -void __init nslu2_map_io(void) -{ - early_serial_setup(&nslu2_serial_ports[0]); -#if 0 - early_serial_setup(&nslu2_serial_ports[1]); -#endif - ixp4xx_map_io(); -} - -static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nslu2_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &nslu2_flash_data, - }, - .num_resources = 1, - .resource = &nslu2_flash_resource, -}; - -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { - .sda_pin = NSLU2_SDA_PIN, - .scl_pin = NSLU2_SCL_PIN, -}; - -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", - .id = 0, - .dev = { - .platform_data = &nslu2_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash -}; - -static void n2_power_off(void) -{ - /* This causes the box to drop the power and go dead. */ -#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 - *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio - *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed -} - -static void __init nslu2_init(void) -{ - /* Need power off to work. */ - pm_power_off = n2_power_off; - platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); -} - -MACHINE_START(NSLU2, "Linksys NSLU2") - MAINTAINER("www.nslu2-linux.org") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(nslu2_map_io) - INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here - .timer = &ixp4xx_timer, - // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? - BOOT_PARAMS(0x0100) - INIT_MACHINE(nslu2_init) -MACHINE_END diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2.h b/packages/linux/openslug-kernel-2.6.11.2/nslu2.h deleted file mode 100644 index bb79aaa007..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nslu2.h - * - * NSLU2 platform specific definitions - * - * Author: Mark Rakes <mrakes AT mac.com> - * Maintainers: http://www.nslu2-linux.org - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -// kas11 11-2-04 - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <asm/hardware.h>" -#endif - -#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* - * NSLU2 PCI IRQs - */ -#define NSLU2_PCI_MAX_DEV 3 -#define NSLU2_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NSLU2_PCI_INTA_PIN 11 -#define NSLU2_PCI_INTB_PIN 10 -#define NSLU2_PCI_INTC_PIN 9 -//#define NSLU2_PCI_INTD_PIN 8 - - diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch b/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch deleted file mode 100644 index bff8400396..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2_2.6.11.patch +++ /dev/null @@ -1,159 +0,0 @@ -diff -urN linux-2.6.11.orig/arch/arm/boot/compressed/head.S linux-2.6.11/arch/arm/boot/compressed/head.S ---- linux-2.6.11.orig/arch/arm/boot/compressed/head.S 2005-03-01 21:38:25.000000000 -1000 -+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-03-03 00:55:05.000000000 -1000 -@@ -79,6 +79,14 @@ - .endm - .macro writeb, rb - str \rb, [r3, #0] -+ .endm -+#elif defined(CONFIG_ARCH_NSLU2) -+ .macro loadsp, rb -+ mov \rb, #0xc8000000 -+ .endm -+ .macro writeb, rb -+ str \rb, [r3, #0] -+ .endm - #elif defined(CONFIG_ARCH_IXP2000) - .macro loadsp, rb - mov \rb, #0xc0000000 -diff -urN linux-2.6.11.orig/arch/arm/boot/compressed/head-xscale.S linux-2.6.11/arch/arm/boot/compressed/head-xscale.S ---- linux-2.6.11.orig/arch/arm/boot/compressed/head-xscale.S 2005-03-01 21:37:52.000000000 -1000 -+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-03-02 01:41:31.000000000 -1000 -@@ -47,3 +47,8 @@ - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) - #endif - -+#ifdef CONFIG_ARCH_NSLU2 -+ mov r7, #(MACH_TYPE_NSLU2 & 0xff) -+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) -+#endif -+ -diff -urN linux-2.6.11.orig/arch/arm/mach-ixp4xx/Kconfig linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.11.orig/arch/arm/mach-ixp4xx/Kconfig 2005-03-01 21:37:49.000000000 -1000 -+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-03-02 01:43:42.000000000 -1000 -@@ -43,6 +43,12 @@ - IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see Documentation/arm/IXP4xx. - -+config ARCH_NSLU2 -+ bool "NSLU2" -+ help -+ Say 'Y' here if you want your kernel to support Linksys's -+ NSLU2 NAS device. For more information on this platform, -+ see http://www.nslu2-linux.org - - # - # IXCDP1100 is the exact same HW as IXDP425, but with a different machine -diff -urN linux-2.6.11.orig/arch/arm/mach-ixp4xx/Makefile linux-2.6.11/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.11.orig/arch/arm/mach-ixp4xx/Makefile 2005-03-01 21:37:49.000000000 -1000 -+++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile 2005-03-02 01:44:16.000000000 -1000 -@@ -9,4 +9,4 @@ - obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o - obj-$(CONFIG_ARCH_PRPMC1100) += prpmc1100-pci.o prpmc1100-setup.o - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o -- -+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o -diff -urN linux-2.6.11.orig/arch/arm/tools/mach-types linux-2.6.11/arch/arm/tools/mach-types ---- linux-2.6.11.orig/arch/arm/tools/mach-types 2005-03-01 21:38:08.000000000 -1000 -+++ linux-2.6.11/arch/arm/tools/mach-types 2005-03-02 01:44:50.000000000 -1000 -@@ -604,7 +604,7 @@ - roverp7 MACH_ROVERP7 ROVERP7 594 - pr818s MACH_PR818S PR818S 595 - trxpro MACH_TRXPRO TRXPRO 596 --nslu2 MACH_NSLU2 NSLU2 597 -+nslu2 ARCH_NSLU2 NSLU2 597 - e400 MACH_E400 E400 598 - trab MACH_TRAB TRAB 599 - cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 -diff -urN linux-2.6.11.orig/drivers/i2c/chips/Kconfig linux-2.6.11/drivers/i2c/chips/Kconfig ---- linux-2.6.11.orig/drivers/i2c/chips/Kconfig 2005-03-01 21:38:10.000000000 -1000 -+++ linux-2.6.11/drivers/i2c/chips/Kconfig 2005-03-02 01:45:28.000000000 -1000 -@@ -370,5 +370,14 @@ - - This driver can also be built as a module. If so, the module - will be called isp1301_omap. -+config SENSORS_X1205 -+ tristate "Xicor X1205 RTC chip" -+ depends on I2C && EXPERIMENTAL -+ select I2C_SENSOR -+ help -+ If you say yes here you get support for the Xicor x1205 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called x1205-rtc - - endmenu -diff -urN linux-2.6.11.orig/drivers/i2c/chips/Makefile linux-2.6.11/drivers/i2c/chips/Makefile ---- linux-2.6.11.orig/drivers/i2c/chips/Makefile 2005-03-01 21:38:34.000000000 -1000 -+++ linux-2.6.11/drivers/i2c/chips/Makefile 2005-03-02 01:45:54.000000000 -1000 -@@ -35,6 +35,7 @@ - obj-$(CONFIG_SENSORS_VIA686A) += via686a.o - obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG -diff -urN linux-2.6.11.orig/drivers/mtd/maps/ixp4xx.c linux-2.6.11/drivers/mtd/maps/ixp4xx.c ---- linux-2.6.11.orig/drivers/mtd/maps/ixp4xx.c 2005-03-01 21:37:30.000000000 -1000 -+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-03-02 01:46:40.000000000 -1000 -@@ -94,7 +94,11 @@ - struct resource *res; - }; - -+#ifdef CONFIG_ARCH_NSLU2 -+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; -+#else - static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -+#endif - - static int ixp4xx_flash_remove(struct device *_dev) - { -diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h ---- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 21:37:51.000000000 -1000 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-02 17:34:46.000000000 -1000 -@@ -44,5 +44,6 @@ - #include "ixdp425.h" - #include "coyote.h" - #include "prpmc1100.h" -+#include "nslu2.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ -diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h ---- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 21:38:12.000000000 -1000 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-02 01:49:27.000000000 -1000 -@@ -93,4 +93,11 @@ - #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 - #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -+/* -+ * NSLU2 board IRQs -+ */ -+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 -+ - #endif -diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h ---- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 21:37:49.000000000 -1000 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-03 02:26:29.231822000 -1000 -@@ -52,7 +52,7 @@ - * Expansion BUS Configuration registers - */ - #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) --#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) -+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) - #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) - - /* -diff -urN linux-2.6.11.orig/include/linux/i2c-id.h linux-2.6.11/include/linux/i2c-id.h ---- linux-2.6.11.orig/include/linux/i2c-id.h 2005-03-01 21:38:34.000000000 -1000 -+++ linux-2.6.11/include/linux/i2c-id.h 2005-03-02 01:50:14.000000000 -1000 -@@ -110,6 +110,7 @@ - #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */ - #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ - #define I2C_DRIVERID_SAA7114H 64 /* video decoder */ -+#define I2C_DRIVERID_X1205 0xF0 - - - #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ diff --git a/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch b/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch deleted file mode 100644 index 1b3cf3fcb8..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/usbnet.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- linux-2.6.11/drivers/usb/net/usbnet.c_orig 2005-03-03 13:50:54.053237416 -0500 -+++ linux-2.6.11/drivers/usb/net/usbnet.c 2005-03-03 13:53:19.415139048 -0500 -@@ -2404,12 +2404,13 @@ - #endif - size = (sizeof (struct ethhdr) + dev->net->mtu); - -- if ((skb = alloc_skb (size, flags)) == NULL) { -+ if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) { - devdbg (dev, "no rx skb"); - defer_kevent (dev, EVENT_RX_MEMORY); - usb_free_urb (urb); - return; - } -+ skb_reserve (skb, NET_IP_ALIGN); - - entry = (struct skb_data *) skb->cb; - entry->urb = urb; diff --git a/packages/linux/openslug-kernel-2.6.11.2/x1205-rtc.c b/packages/linux/openslug-kernel-2.6.11.2/x1205-rtc.c deleted file mode 100644 index 9ef333b2c4..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/x1205-rtc.c +++ /dev/null @@ -1,678 +0,0 @@ -/* - x1205 - an 12c driver for the Xicor X1205 RTC - Copyright 2004 Karen Spearel - - please send all reports to: - kas11 at tampabay dot rr dot com - - based on linux/drivers/acron/char/pcf8583.h - Copyright (C) 2000 Russell King - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - - * i2c_adapter is the structure used to identify a physical i2c bus along - * with the access algorithms necessary to access it. - -struct i2c_adapter { - struct module *owner; - unsigned int id; == is algo->id | hwdep.struct->id, for registered values see below - unsigned int class; - struct i2c_algorithm *algo; the algorithm to access the bus - void *algo_data; - - --- administration stuff. - int (*client_register)(struct i2c_client *); - int (*client_unregister)(struct i2c_client *); - - data fields that are valid for all devices - struct semaphore bus_lock; - struct semaphore clist_lock; - - int timeout; - int retries; - struct device dev; the adapter device - struct class_device class_dev; the class device - -#ifdef CONFIG_PROC_FS - No need to set this when you initialize the adapter - int inode; -#endif def CONFIG_PROC_FS - - int nr; - struct list_head clients; - struct list_head list; - char name[I2C_NAME_SIZE]; - struct completion dev_released; - struct completion class_dev_released; -}; -*/ - - -/*========== Driver for the X1205 on the Linksys NSLU2 ==================*/ - -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/bcd.h> -#include <linux/rtc.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/miscdevice.h> -#include <linux/device.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <linux/moduleparam.h> - -#define RTC_GETDATETIME 0 -#define RTC_SETTIME 1 -#define RTC_SETDATETIME 2 - -#define I2C_M_WR 0 // just for consistancy - -// offsets into read buf - add 2 for write buf -#define CCR_SEC 0 -#define CCR_MIN 1 -#define CCR_HOUR 2 -#define CCR_MDAY 3 -#define CCR_MONTH 4 -#define CCR_YEAR 5 -#define CCR_WDAY 6 -#define CCR_Y2K 7 - -#define X1205_I2C_BUS_ADDR 0x6f // hardwired into x1205 -#define X1205_ALM0_BASE 0x00 // Base address of the ALM0 -#define X1205_CCR_BASE 0x30 // Base address of the CCR -#define X1205_SR_ADDR 0x3f // Status Register -#define X1205_SR_WEL 0x02 // Write Enable Latch bit -#define X1205_SR_RWEL 0x04 // Register Write Enable Bit -#define X1205_MILBIT 0x80 // this bit set in ccr.hour for 24 hr mode -#define NOERR 0 -#define RTC_NODATE 0 -#define RTC_DATETOO 1 - -// comment out next line is your x1205 can't do page writes -//#define X1205PAGEWRITE 1 -#ifdef X1205PAGEWRITE -#define DRIVERNAME "Xicor x1205 RTC Driver v0.9.3.3" -#else -#define DRIVERNAME "Xicor x1205 RTC Dvr v0.9.3.3NPW" -#endif - -#define DEBUG KERN_DEBUG -/* This, if defined to 1, turns on a lot of debugging meessages. */ -#if X1205_DEBUG -#define x1205_debug(args) printk args -#else -#define x1205_debug(args) ((void)0) -#endif - - -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base); -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base); -static int x1205_attach(struct i2c_adapter *adapter); -static int x1205_detach(struct i2c_client *client); -static int x1205_validate_tm(struct rtc_time *tm, int datetoo); -static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); -static int x1205_sync_rtc(void); -static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr); -static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data); - -static struct i2c_driver x1205_driver = { - .owner = THIS_MODULE, - .name = DRIVERNAME, - .id = I2C_DRIVERID_X1205, - .flags = I2C_DF_NOTIFY, - .attach_adapter = &x1205_attach, //we don't need to probe...x1205 is hardwired @ 0x6f - .detach_client = &x1205_detach, - .command = &x1205_command, //this prolly never gets called...used internally tho -}; - -static struct i2c_client x1205_i2c_client = { - .id = I2C_DRIVERID_X1205, - .flags = 0, - .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit - .adapter = NULL, // the adapter we sit on assigned in attach - .driver = &x1205_driver, // and our access routines - .usage_count = 0, // How many accesses currently to this client - .dev = {}, // the device structure - .list = {}, - .name = DRIVERNAME, - .released = {}, -}; - -static struct file_operations rtc_fops = { - owner: THIS_MODULE, - ioctl: x1205_ioctl, - read: x1205_read, -}; - -static struct miscdevice x1205_miscdev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops, -}; -extern int (*set_rtc)(void); -static unsigned epoch = 1900; //coresponds to year 0 -static unsigned rtc_epoch = 2000; -static const unsigned char days_in_mo[] = -{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -//===================================CODE====================================== -// in the routines that deal directly with the x1205 hardware, we use -// rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch -// Epoch is inited as 2000. Time is set to UT -//============================================================================= -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base) -{ - static unsigned char addr[2] = { 0,} ; - unsigned char buf[8]; - struct i2c_msg msgs[2] = { - { client->addr, I2C_M_WR, 2, addr }, //msg 1 = send base address - { client->addr, I2C_M_RD, 8, buf }, //msg 2 = read sequential data - }; - addr[1] = reg_base; - if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { //did we read 2 messages? - x1205_debug((KERN_DEBUG "raw x1205 read data - sec-%02x min-%02x hr-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", - buf[0],buf[1],buf[2],buf[3],buf[4],buf[5],buf[6], buf[7])); - tm->tm_sec = BCD2BIN(buf[CCR_SEC]); - tm->tm_min = BCD2BIN(buf[CCR_MIN]); - buf[CCR_HOUR] &= ~X1205_MILBIT; - tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); //hr is 0-23 - tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); - tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); - rtc_epoch = BCD2BIN(buf[CCR_Y2K]) * 100; - tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + rtc_epoch - epoch; - tm->tm_wday = buf[CCR_WDAY]; - x1205_debug((KERN_DEBUG "rtc_time output data - sec-%02d min-%02d hr-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday,epoch, rtc_epoch)); - } else { - printk(KERN_DEBUG "i2c_transfer Read Error\n"); - return -EIO; - } - - return NOERR; -} -// x1205pagewrite allows writing a block of registers in msg3 even though the x1205 says -// nothing about this in its spec. -// it needs more testing as it is possible some x1205s are actually not-completely- -// functional x1226s and there is a reason for the multiple write to not be in the spec. -// anyhow, it is enabled for the time being...and we even push out luck by sending 10 bytes - -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base) -{ - static unsigned char wel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL }; - static unsigned char rwel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL | X1205_SR_RWEL }; - static unsigned char diswe[3] = { 0, X1205_SR_ADDR, 0 }; - -#ifdef X1205PAGEWRITE - - static unsigned char buf[10] = { 0, X1205_CCR_BASE, }; - struct i2c_msg msgs[4] = { - { client->addr, I2C_M_WR, 3, wel }, //msg 1 = write WEL to to ccr sr - { client->addr, I2C_M_WR, 3, rwel }, //msg 2 = write RWEL to ccr sr - { client->addr, I2C_M_WR, 10, buf }, //msg 3 = write ccr base addr +seq data - { client->addr, I2C_M_WR, 3, diswe }, //msg 4 = 0 to ccr sr to disable writes - }; - - msgs[2].len = 5; // 5 bytes + addr to set time only - buf [1] = reg_base; - buf[CCR_SEC+2] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN+2] = BIN2BCD(tm->tm_min); - buf[CCR_HOUR+2] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format - if (datetoo == 1) { - buf[CCR_MDAY+2] = BIN2BCD(tm->tm_mday); - buf[CCR_MONTH+2] = BIN2BCD(tm->tm_mon); // input is 0-11 - buf[CCR_YEAR+2] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 - buf[CCR_WDAY+2] = tm->tm_wday & 7; - buf[CCR_Y2K+2] = BIN2BCD((rtc_epoch/100)); - msgs[2].len += 5; //5 more bytes to set date - } - x1205_debug((KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch)); - x1205_debug((KERN_DEBUG "BCD write data - sec-%02x min-%02x hour-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", - buf[2],buf[3],buf[4],buf[5],buf[6], buf[7], buf[8], buf[9])); - - if ((i2c_transfer(client->adapter, msgs, 4)) != 4) - return -EIO; - return NOERR; - -#else //do this if page writes aren't working - - int i,xfer,count; - static unsigned char data[3] = { 0,}; - static unsigned char buf[8]; - - buf[CCR_SEC] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN] = BIN2BCD(tm->tm_min); - buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format - count = CCR_HOUR+1; - if (datetoo == 1) { - buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); - buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); // input is 0-11 - buf[CCR_YEAR] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 - buf[CCR_WDAY] = tm->tm_wday & 7; - buf[CCR_Y2K] = BIN2BCD((rtc_epoch/100)); - count = CCR_Y2K+1; - } - x1205_debug((KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch)); - - xfer = i2c_master_send(client, wel, 3); - x1205_debug((KERN_DEBUG "wen - %x\n", xfer)); - if (xfer != 3) - return -EIO; - - xfer = i2c_master_send(client, rwel, 3); - x1205_debug((KERN_DEBUG "wenb - %x\n", xfer)); - if (xfer != 3) - return -EIO; - - for (i = 0; i < count; i++) { - data[1] = i + reg_base; - data[2] = buf[i]; - xfer = i2c_master_send(client, data, 3); - x1205_debug((KERN_DEBUG "xfer - %d addr - %02x data - %02x\n", xfer, data[1], data[2])); - if (xfer != 3) - return -EIO; - }; - - xfer = i2c_master_send(client, diswe, 3); - x1205_debug((KERN_DEBUG "wdis - %x\n", xfer)); - if (xfer != 3) - return -EIO; - return NOERR; -#endif -} -//============================================================================= - -static int x1205_attach(struct i2c_adapter *adapter) -{ - struct rtc_time tm; - struct timespec tv; - int errno; - - x1205_i2c_client.adapter = adapter; - x1205_i2c_client.id++; - - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver - return -EIO; - - if ((errno = i2c_attach_client(&x1205_i2c_client)) != NOERR) - return errno; - - /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether - * it stores the most close value or the value with partial seconds - * truncated, however it is important for x1205_sync_rtc that it be - * defined to store the truncated value. This is because otherwise it - * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the - * sync function, and atomic reads of >32bits on ARM are not possible. - * So storing the most close value would slow down the sync API. So - * Here we have the truncated value and the best guess is to add 0.5s - */ - tv.tv_nsec = NSEC_PER_SEC >> 1; - /* WARNING: this is not the C library 'mktime' call, it is a built in - * inline function from include/linux/time.h. It expects (requires) - * the month to be in the range 1-12 - */ - tv.tv_sec = mktime(tm.tm_year+epoch, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, - tm.tm_min, tm.tm_sec); - do_settimeofday(&tv); - set_rtc = x1205_sync_rtc; - - printk(KERN_DEBUG "%s attached on adapter %s\n",x1205_i2c_client.name, - x1205_i2c_client.adapter->name); //why is this name a null string? - - return NOERR; -} - -static int x1205_detach(struct i2c_client *client) -{ - int errno; - - if ((errno = i2c_detach_client(client)) != 0) { - printk(KERN_DEBUG "i2c_detach failed - errno = %d\n", errno); - return errno; - } - - return NOERR; -} - -// make sure the rtc_time values are in bounds -static int x1205_validate_tm(struct rtc_time *tm, int datetoo) -{ - if (datetoo) { - /* This used to be 1900, not epoch, but all the read APIs subtract - * epoch, not 1900, and the result of these APIs *is* fed back in - * to x1205_command (which calls this.) - */ - tm->tm_year += epoch; - - /* The RTC uses a byte containing a BCD year value, so this is - * limited to the range 0..99 from rtc_epoch. - */ - if ((tm->tm_year < rtc_epoch || tm->tm_year > rtc_epoch + 99) || - ((tm->tm_mon > 11) || tm->tm_mon < 0 || (tm->tm_mday <= 0)) || - (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && - ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) - ) { - printk(KERN_DEBUG "x1205_validate_tm: invalid date:\t%04d,%02d,%02d\n", - tm->tm_year, tm->tm_mon, tm->tm_mday); - return -EINVAL; - } - - tm->tm_year -= epoch; - } - - if (((tm->tm_hour < 0) || (tm->tm_min < 0) || (tm->tm_sec < 0)) || - ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))) { - printk(KERN_DEBUG "x1205_validate_tm: invalid time:\t%02d,%02d,%02d\n", - tm->tm_hour, tm->tm_min, tm->tm_sec); - return -EINVAL; - } - - return NOERR; -} - -static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) -{ - int errno, dodate = RTC_DATETOO; - - if (client == NULL || tm == NULL) - return -EINVAL; - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - x1205_debug((KERN_DEBUG "x1205_command %d\n", cmd)); - - switch (cmd) { - case RTC_GETDATETIME: - return x1205_get_datetime(client, tm, X1205_CCR_BASE); - - case RTC_SETTIME: // note fall thru - dodate = RTC_NODATE; - case RTC_SETDATETIME: - if ((errno = x1205_validate_tm(tm, dodate)) < NOERR) - return errno; - return x1205_set_datetime(client, tm, dodate, X1205_CCR_BASE); - - default: - return -EINVAL; - } -} - -static int x1205_sync_rtc(void) -{ - /* sync to xtime, tv_nsec is ignored (see the command above about - * use of the truncated value) so this is pretty easy. kas11's - * code took are to do RTC_SETTIME - i.e. not set the date. My - * assumption is that this may be because date setting is slow, so - * this feature is retained. NTP does a sync when the time is - * changed, including significant changes. The sync needs to - * set the date correctly if necessary. - */ - struct rtc_time tm; - time_t new_s, old_s, div, rem; - unsigned int cmd; - - x1205_debug((KERN_DEBUG "x1205_sync_rtc entry\n")); - - { - int err = x1205_command(&x1205_i2c_client, RTC_GETDATETIME, &tm); - if (err != NOERR) { - printk(KERN_DEBUG "x1205_sync_rtc exit (failed to get date)\n"); - return err; - } - } - - old_s = mktime(tm.tm_year+epoch, tm.tm_mon+1, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - new_s = xtime.tv_sec; - - /* Optimisation, the clock only stores seconds so it's pointless - * to reset it if it is within 1s of now. - */ - if (old_s - 1 <= new_s && new_s <= old_s + 1) { - x1205_debug((KERN_DEBUG "x1205_sync_rtc exit (RTC in sync)\n")); - return NOERR; - } - - div = new_s / 60; - tm.tm_sec = new_s - div*60; - rem = div; - div /= 60; - tm.tm_min = rem - div*60; - rem = div; - div /= 24; - tm.tm_hour = rem - div*24; - - /* Now subtract the result from the original 'new' value. This - * should be zero, if not an mday change is required. Notice - * that this will tend to fire for small drifts close to UTC midnight. - */ - cmd = RTC_SETTIME; - rem = new_s - mktime(tm.tm_year+epoch, tm.tm_mon+1, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - if (rem != 0) { - int dif; - - /* Make an approximation to year/month/day. */ - rem = div; - div = (2*div)/61; // 30.5 days/month - tm.tm_mday = 1 + rem - (div*61)/2; - rem = div; - div /= 12; - rem -= 12*div; - while (tm.tm_mday > days_in_mo[rem]) { - tm.tm_mday -= days_in_mo[rem]; - if (++rem >= 12) { - rem -= 12; - ++div; - } - } - tm.tm_mon = rem; - div += 1970; // base of tv_sec - - /* Calculate the error in the approximation as a signed - * int value. - */ - dif = new_s - mktime(div, tm.tm_mon+1, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - while (dif < 0) { - --(tm.tm_mday); - dif += 86400; - } - while (dif >= 86400) { - ++(tm.tm_mday); - dif -= 86400; - } - if (dif != 0) - printk(KERN_ERR "x1205_sync_rtc (error in date %d)\n", dif); - - /* Normalise the result. */ - while (tm.tm_mday <= 0) { - if (--(tm.tm_mon) < 0) { - tm.tm_mon += 12; - --div; - } - tm.tm_mday += days_in_mo[tm.tm_mon] + (tm.tm_mon==1 && - ((!(div % 4) && (div % 100) ) || !(div % 400))); - } - - do { - rem = days_in_mo[tm.tm_mon] + (tm.tm_mon==1 && - ((!(div % 4) && (div % 100) ) || !(div % 400))); - if (tm.tm_mday > rem) { - tm.tm_mday -= rem; - if (++(tm.tm_mon) >= 12) { - tm.tm_mon -= 12; - ++div; - } - } else { - break; - } - } while (1); - - tm.tm_year = div-epoch; - cmd = RTC_SETDATETIME; - printk(KERN_DEBUG "x1205_sync_rtc exit (change date %d)\n", new_s-old_s); - } else { - printk(KERN_DEBUG "x1205_sync_rtc exit (change seconds %d)\n", new_s-old_s); - /* But avoid the race condition when the date is about to - * change. - */ - if (tm.tm_min == 59 && tm.tm_hour == 23) - cmd = RTC_SETDATETIME; - } - - return x1205_command(&x1205_i2c_client, cmd, &tm); -} - -static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr) -{ - struct rtc_time tm; - - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return -EIO; - return copy_to_user(buf, &tm, sizeof(tm)) ? -EFAULT : NOERR; -} - -//============================================================================== - -static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_time tm; - int errno; - - x1205_debug((KERN_DEBUG "ioctl = %x\n", cmd)); - - switch (cmd) { - case RTC_RD_TIME: - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return -EIO; - break; - - case RTC_SET_TIME: - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - if ((errno = x1205_validate_tm(&tm, RTC_DATETOO)) < NOERR) - return errno; - return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_CCR_BASE); - - case RTC_ALM_SET: //FIXME: set Control Regs - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_ALM0_BASE); - - case RTC_ALM_READ: - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_ALM0_BASE)) < NOERR) - return -EIO; - break; - - case RTC_EPOCH_READ: - - return put_user (epoch, (unsigned long __user *)arg); - - case RTC_EPOCH_SET: - if (arg < 1900) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - epoch = arg; - return 0; - - default: - return -ENOTTY; - } - return copy_to_user((void __user *)arg, &tm, sizeof tm) ? -EFAULT : 0; - -} - -static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) -{ - struct rtc_time tm; - int slen, errno; - - if ((errno = x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return errno; - -// here we return the real year and the month as 1-12 since it is human-readable - slen = sprintf(buf, "rtc_time\t: %02d:%02d:%02d\nrtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year + 1900, tm.tm_mon+1, tm.tm_mday); - x1205_debug((KERN_DEBUG "raw rtc_time\t: %02d:%02d:%02d\nraw rtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon, tm.tm_mday)); - - if (slen <= off + len) - *eof = 1; - *start = buf + off; - slen -= off; - if (slen > len) - slen = len; - if ( slen < 0 ) - slen = 0; - - return slen; -} - -static int __init x1205_init(void) -{ - struct rtc_time tm; - int errno; - printk(KERN_INFO "LOADED %s\n", DRIVERNAME); - - if ((errno = i2c_add_driver(&x1205_driver)) != NOERR) { - dev_dbg(x1205_i2c_client.dev, "x1205_init failed - errno = %d\n", errno); - return (errno); - } - if ((errno = misc_register(&x1205_miscdev)) != NOERR) { - dev_dbg(x1205_i2c_client.dev, "Register Misc Driver failed - errno = %d\n", errno); - i2c_del_driver(&x1205_driver); - return errno; - } - if (create_proc_read_entry("driver/rtc", 0, NULL, x1205_read_proc, NULL) < NOERR) - return -ENOMEM; - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functionality - return -EIO; - - return NOERR; -} - -static void __exit x1205_exit(void) -{ - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&x1205_miscdev); - i2c_del_driver(&x1205_driver); - set_rtc = NULL; -} - -MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -MODULE_DESCRIPTION("Xicor X1205-RTC Driver"); -MODULE_LICENSE("GPL"); -static int debug = 7; -module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging enabled = 1"); - -module_init(x1205_init); -module_exit(x1205_exit); diff --git a/packages/linux/openslug-kernel-2.6.11.2/xscale-reset.patch b/packages/linux/openslug-kernel-2.6.11.2/xscale-reset.patch deleted file mode 100644 index 4e68456e20..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/xscale-reset.patch +++ /dev/null @@ -1,155 +0,0 @@ ---- linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-03-09 00:12:44.000000000 -0800 -+++ linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-06-18 15:39:22.701222319 -0700 -@@ -137,23 +137,129 @@ - * same state as it would be if it had been reset, and branch - * to what would be the reset vector. - * -+ * This code is ixp425 specific with respect to the reset of -+ * the 'configuration register' - to be found at address -+ * 0xC40000020 'IXP425_EXP_CNFGO' -+ * - * loc: location to jump to for soft reset - */ - .align 5 - ENTRY(cpu_xscale_reset) -+ @ always branch to 0 -+ mov r0, #0 -+ -+ @ disable both FIQ and IRQ, put us into 32 bit -+ @ SVC mode (no thumb). - mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r1 @ reset CPSR -- mrc p15, 0, r1, c1, c0, 0 @ ctrl register -- bic r1, r1, #0x0086 @ ........B....CA. -- bic r1, r1, #0x3900 @ ..VIZ..S........ -- mcr p15, 0, r1, c1, c0, 0 @ ctrl register -- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB -- bic r1, r1, #0x0001 @ ...............M -- mcr p15, 0, r1, c1, c0, 0 @ ctrl register -- @ CAUTION: MMU turned off from this point. We count on the pipeline -- @ already containing those two last instructions to survive. -+ -+ @ disable debug, clock and power registers are -+ @ unimplemented. -+ mcr p14, 0, r0, c10, c0, 0 @ disable debug -+ -+ @ disable the performance monitor -+ mcr p14, 0, r0, c0, c1, 0 @ PMNC (ctrl reg) -+ mcr p14, 0, r0, c4, c1, 0 @ INTEN (intrpt enable) -+ -+ @ wait for p14 to complete -+ mrc p14, 0, ip, c4, c1, 0 @ arbitrary read -+ mov ip, ip @ sync -+ -+ @ clear the PID register -+ mcr p15, 0, r0, c13, c0, 0 @ OR nothing with address! -+ -+ @ unlock the TLBs and the I/D cache locks -+ mcr p15, 0, r0, c10, c8, 1 @ data TLB unlocked -+ mcr p15, 0, r0, c10, c4, 1 @ instruction TLB unlocked -+ mcr p15, 0, r0, c9, c2, 1 @ unlock data cache -+ mcr p15, 0, r0, c9, c1, 1 @ unlock instruction cache -+ -+ @ zap the minidata cache to write through with write coalescing -+ @ disabled. -+ mov r1, #0x21 @ MD=b10, K=1 -+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -+ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register -+ mov ip, ip @ sync -+ mcr p15, 0, r1, c1, c0, 1 @ write through, no coalesc -+ -+ @ set the control register, the MMU is enabled but everything else -+ @ is disabled at this point, r1 contains the control register flags -+ @ the process is now in little-endian mode (no matter, we aren't -+ @ going to do any <word access) -+ mov r1, #0x79 @ 00vIz0rs.b1111caM -+ orr r1, r1, #0x1000 @ I-cache enable -+ mcr p15, 0, r1, c1, c0, 0 -+ mrc p15, 0, ip, c1, c0, 0 -+ mov ip, ip @ sync to coproc -+ mov r1, #0x78 @ 00viz0rs.b1111cam -+ -+ @ and flush the I/D cache and BTB -+ mcr p15, 0, r0, c7, c7, 0 -+ -+ @ that's most of the work. The only thing which remains is to -+ @ remap the flash memory and disable the MMU. Do some setup -+ @ for this, also get ready to set the LED to red and put in -+ @ a watchdog timer. -+ -+ @ get ready to reset the configuration registers in the expansion -+ @ bus. CFGN1 disables byte swap and interrupt. -+ ldr r3, =IXP4XX_PERIPHERAL_BASE_VIRT -+ ldr r4, [r3, #IXP4XX_EXP_CFG1_OFFSET] -+ bic r4, r4, #0x13 @ -BYTE_SWAP_EN, -SW_INT? -+ str r4, [r3, #IXP4XX_EXP_CFG1_OFFSET] -+ -+ @ load the current configuration register from its -+ @ virtual address and set the MEM_MAP bit ready to map the -+ @ flash back to address 0, but don't write it yet. -+ ldr r4, [r3, #IXP4XX_EXP_CFG0_OFFSET] -+ orr r4, r4, #0x80000000 -+ -+ @ load the GPIO OUTR register address and current value, -+ @ set the low nibble to just red LED on. -+ ldr r5, =IXP4XX_GPIO_BASE_VIRT -+ ldr r6, [r5, #IXP4XX_GPIO_GPOUTR_OFFSET] -+ bic r6, r6, #0xf -+ orr r6, r6, #0xd -+ -+ @ load the watchdog timer virtual address, set the key and -+ @ the timer and start the down counter -+ ldr r7, =IXP4XX_TIMER_BASE_VIRT -+ ldr r8, =IXP4XX_WDT_KEY @ set key -+ str r8, [r7, #IXP4XX_OSWK_OFFSET] -+ mov r8, #0x1000000 @ about 0.25 seconds -+ str r8, [r7, #IXP4XX_OSWT_OFFSET] @ set timer -+ mov r8, #(IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE) -+ str r8, [r7, #IXP4XX_OSWE_OFFSET] @ enable reset -+ -+ @ invalidate the TLBs to ensure that there isn't a match for -+ @ '0' there. - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs -- mov pc, r0 -+ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register -+ mov ip, ip @ sync -+ -+ @ remap the flash (after preloading instructions into the -+ @ I-cache) then turn off the MMU and branch to 0 when it is -+ @ off. It seems that RedBoot relies on the page tables being -+ @ set up on boot, so set the page table head register too. -+ mov r7, #0x4000 @ flash page table -+ ldr r8, =IXP4XX_GPIO_BASE_PHYS @ for led setting -+ bic r9, r6, #0xc @ disk1+disk2 led on -+ str r6, [r5, #IXP4XX_GPIO_GPOUTR_OFFSET] @ red led -+ b cache -+ -+ @ cached instructions These 8 instructions are valid in the cache -+ @ along with the associated TLB as soon as the first is executed. -+ @ They are used to effect the transition back into the flash -+ @ ROM code. -+ .align 5 -+cache: str r4, [r3, #IXP4XX_EXP_CFG0_OFFSET] @0 no memory! -+ mcr p15, 0, r7, c2, c0, 0 @1 set translation table base -+ mcr p15, 0, r1, c1, c0, 0 @2 no MMU! -+ mrc p15, 0, ip, c2, c0, 0 @3 arbitrary read of cp15 -+ str r9, [r8, #IXP4XX_GPIO_GPOUTR_OFFSET] @4 red+disk1+disk2 led -+ sub pc, r0, ip, LSR #32 @5 sync and branch to zero -+ nop @6 -+ nop @7 - - /* - * cpu_xscale_do_idle() -@@ -168,8 +274,10 @@ - .align 5 - - ENTRY(cpu_xscale_do_idle) -- mov r0, #1 -- mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE -+ @ NSLU2/ixp420: not implemented in the hardware, docs -+ @ say do not write! -+ @mov r0, #1 -+ @mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE - mov pc, lr - - /* ================================= CACHE ================================ */ diff --git a/packages/linux/openslug-kernel-2.6.11/.mtn2git_empty b/packages/linux/openslug-kernel-2.6.11/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/openslug-kernel-2.6.11/defconfig b/packages/linux/openslug-kernel-2.6.11/defconfig deleted file mode 100644 index 9d5f54c13b..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/defconfig +++ /dev/null @@ -1,1301 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Tue Mar 8 02:00:48 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -# CONFIG_ARCH_IXDP425 is not set -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set -CONFIG_ARCH_NSLU2=y -# CONFIG_ARCH_PRPMC1100 is not set -# CONFIG_MACH_GTWX5715 is not set - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y -CONFIG_DMABOUNCE=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# General setup -# -CONFIG_PCI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -# CONFIG_XIP_KERNEL is not set -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PC-card bridges -# - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -CONFIG_PM=y -# CONFIG_PREEMPT is not set -CONFIG_APM=y -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000 console=ttyS0,115200n8" -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -# CONFIG_MD_LINEAR is not set -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -# CONFIG_IP_VS_PROTO_TCP is not set -# CONFIG_IP_VS_PROTO_UDP is not set -# CONFIG_IP_VS_PROTO_ESP is not set -# CONFIG_IP_VS_PROTO_AH is not set - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -# CONFIG_IP_VS_SED is not set -# CONFIG_IP_VS_NQ is not set - -# -# IPVS application helper -# -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_HFSC is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_NETEM is not set -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_HIDP is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_IOP3XX is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_SENSORS_X1205=y -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_DPC is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# Misc devices -# - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=m -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_TEST is not set - -# -# USB ATM/DSL drivers -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/openslug-kernel-2.6.11/ixp4xx_copy_from.patch b/packages/linux/openslug-kernel-2.6.11/ixp4xx_copy_from.patch deleted file mode 100644 index 8d0f187d44..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/ixp4xx_copy_from.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- linux-2.6.11/drivers/mtd/maps/ixp4xx.c.orig 2005-03-05 20:00:28.000000000 +0100 -+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-03-05 22:10:48.000000000 +0100 -@@ -29,6 +29,8 @@ - #include <asm/mach-types.h> - #include <asm/mach/flash.h> - -+#include <asm/unaligned.h> -+ - #include <linux/reboot.h> - - #ifndef __ARMEB__ -@@ -60,13 +62,13 @@ static void ixp4xx_copy_from(struct map_ - u16 data; - - for (i = 0; i < (len / 2); i++) { -- data = src[i]; -+ data = get_unaligned((u16*)(src + i)); - dest[i * 2] = BYTE0(data); - dest[i * 2 + 1] = BYTE1(data); - } - - if (len & 1) -- dest[len - 1] = BYTE0(src[i]); -+ dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i))); - } - - /* diff --git a/packages/linux/openslug-kernel-2.6.11/nslu2-io.c b/packages/linux/openslug-kernel-2.6.11/nslu2-io.c deleted file mode 100644 index cd5ed36c15..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/nslu2-io.c +++ /dev/null @@ -1,750 +0,0 @@ -//============================================================================= -// -// n2-io.c version 0.1.7 -// Author: Karen Spearel <kas11 at tampabay.rr.com> -// please report problems/bugs directly to the address above -// -// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per -// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk -// -// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, -// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT -// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER -// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. -// -//============================================================================= -// GPIO Function State -// 0 Red LED Status -// 1 Green LED Ready = 1 -// 2 Disk 2 LED On = 0 -// 3 Disk 1 LED On = 0 -// 4 Buzzer -// 5 Power Button Pressed = 1 -// 8 Power Down Output = 1 powers down N2 -// 12 Reset Pressed = 0 -//============================================================================= -// this driver is N2 specific and is purposely designed to do the minimum -// necessary to provide the necessary services given the limited memory resources -// of the N2. As OpenN2 develops, addition features will be added as -// suggested by the community. -// -//============================================================================= - -#include <linux/config.h> -#include <linux/version.h> -#include <linux/module.h> -#include <linux/utsname.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/miscdevice.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> - -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/hardware.h> -#include <asm-arm/irq.h> -#include <asm-arm/delay.h> -#include <asm-arm/signal.h> - - -#define VERSION "0.1.7" - -#define N2RB_MAJOR 60 -#define N2PB_MAJOR 61 -#define N2BZ_MAJOR 62 -#define N2LM_MAJOR 126 - -#define N2PB_IRQ 22 //gpio5 -#define N2RB_IRQ 29 //gpio12 - -#define N2_BEEP_DUR_LONG 2000 -#define N2_BEEP_DUR_MED 400 -#define N2_BEEP_DUR_SHORT 100 -#define N2_BEEP_PITCH_HIGH 250 -#define N2_BEEP_PITCH_MED 500 -#define N2_BEEP_PITCH_LOW 1000 -#define N2_LONG_DELAY 30000 - -#define N2_BZ_GPIO 4 -#define N2_PB_GPIO 5 -#define N2_PO_GPIO 8 //power off -#define N2_RB_GPIO 12 - -#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 -#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 -#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 - -#define NOERR 0 - -#define RB_DELAY 50 -#define PB_DELAY 20 - -#define PWR_OFF_STR "poweroff" - - -// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe - -#define N2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible -#define N2BZ_BEEP _IO('M',1) //one beep at current defaults -#define N2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults -#define N2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 -#define N2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies -#define N2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies -#define N2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever -#define N2BZ_COMBINED _IOW('M',8,long) //combine all params in a long - -#define N2LM_OFF _IOW('M',32,long) -#define N2LM_ON _IOW('M',33,long) -#define N2LM_BLINK _IOW('M',34,long) -#define N2LM_ALT _IOW('M',35,long) -#define N2LM_ALL_ON _IO('M',36) -#define N2LM_ALL_OFF _IO('M',37) - -#define PHYS_LEDS 4 -#define BLINK_DELAY 25 - -// OR Masks to turn these LEDs ON - -#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 -#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 -#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 - -// AND Masks to turn these LEDs OFF - -#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 -#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 -#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 - -// AND Masks to turn these LEDs ON - -#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 -#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 - -// Or Masks to turn these LEDs OFF - -#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 -#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 - -// EOR masks for toggling LEDs on/off - -#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits -#define RS_GRN_TGL 0x00000002 -#define RS_RED_TGL 0x00000001 -#define DISK1_TGL 0x00000008 -#define DISK2_TGL 0x00000004 - -// The LED names for switches - -#define LED_RS_RED 0 -#define LED_RS_GRN 1 -#define LED_DISK1 2 -#define LED_DISK2 3 -#define LED_ALL 4 - -static unsigned long init_jiffy = 0; //jiffies at init time -static unsigned long rb_presses = 0; //number of reset button presses -static unsigned long ontime = 50; -static unsigned long offtime = 450; -static unsigned long bz_repeatcnt = 10; -static unsigned long tone = 1000; - -DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); -DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); - -static struct timer_list n2lm_rsg_timer; //rs green -static struct timer_list n2lm_rsr_timer; //rs red -static struct timer_list n2lm_d1_timer; //drive 1 -static struct timer_list n2lm_d2_timer; //drive 2 -static struct timer_list n2rb_timer; -static struct timer_list n2pb_timer; -static struct timer_list n2bz_timer; //beeper - -//================================================================================================== -// -// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the -// GPIO output register is xor'd with a mask corresponding to the selected led which simply -// flips that bit. No record of what any of the other leds is doing is needed. -// -//================================================================================================== -// this blinks rs green or green/yellow if rs red is on -static void n2lm_rsg_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led - n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout - add_timer(&n2lm_rsg_timer); //reinit timer - return; -} - -// this blinks or alternates rs red green... inited wit green on/red off -static void n2lm_rsr_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; - n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsr_timer); - return; -} -// blinks disk 1 -static void n2lm_d1_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; - n2lm_d1_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d1_timer); - return; -} -// blinks disk 2 -static void n2lm_d2_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; - n2lm_d2_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d2_timer); - return; -} - -//================================================================================================== - -static void n2lm_timer_start(unsigned long led) -{ - - printk(KERN_DEBUG "timer: %ld\n",led); - - switch(led) { - case LED_RS_RED: - n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsr_timer); - break; - - case LED_RS_GRN: - n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsg_timer); - break; - - case LED_DISK1: - n2lm_d1_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d1_timer); - break; - - case LED_DISK2: - n2lm_d2_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d2_timer); - break; - - default: - break; - } - return; -} - -//================================================================================================== - -static void n2lm_timer_stop(unsigned long led) -{ - switch (led) { - case LED_RS_RED: - del_timer(&n2lm_rsr_timer); - break; - case LED_RS_GRN: - del_timer(&n2lm_rsg_timer); - break; - case LED_DISK1: - del_timer(&n2lm_d1_timer); - break; - case LED_DISK2: - del_timer(&n2lm_d2_timer); - break; - default: - break; - } - return; -} - -//-------------------------------------------------------------------------------------------------- - -static void n2lm_timer_stop_all(void) -{ - del_timer(&n2lm_rsg_timer); - del_timer(&n2lm_rsr_timer); - del_timer(&n2lm_d1_timer); - del_timer(&n2lm_d2_timer); - return; -} -//-------------------------------------------------------------------------------------------------- - -static void n2lm_ledon(unsigned long led) -{ - - printk(KERN_DEBUG "ledon: %ld\n", led); - - switch (led) { - case LED_RS_RED: - *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 - return; - case LED_RS_GRN: - *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 - return; - case LED_DISK1: - *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffffb - return; - case LED_DISK2: - *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffff7 - return; - case LED_ALL: //all green - *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; - *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); - return; - } -} - -//-------------------------------------------------------------------------------------------------- - -static void n2lm_ledoff(unsigned long led) -{ - - switch (led) { - case LED_RS_RED: - *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe - return; - case LED_RS_GRN: - *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd - return; - case LED_DISK1: - *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000004 - return; - case LED_DISK2: - *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000008 - return; - case LED_ALL: - *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); - *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); - } -} - -//================================================================================================== - -static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) -{ - - printk(KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led); - - if (led < 0 || led >= PHYS_LEDS) - return -EINVAL; - - switch (cmd ) { - case N2LM_ON: - n2lm_timer_stop(led); - n2lm_ledon(led); - break; - - case N2LM_OFF: - n2lm_timer_stop(led); - n2lm_ledoff(led); - break; - - case N2LM_BLINK: - n2lm_ledon(led); - if (led == LED_RS_RED) - n2lm_rsr_timer.data = RS_RED_TGL; - if (led == LED_RS_GRN) - n2lm_rsr_timer.data = RS_GRN_TGL; - n2lm_timer_start(led); - break; - - case N2LM_ALT: - if (led == LED_RS_RED) - { - n2lm_ledon(LED_RS_GRN); - n2lm_ledoff(LED_RS_RED); - n2lm_rsr_timer.data = RS_RG_ALT; - n2lm_timer_start(LED_RS_RED); - break; - } else - return -EINVAL; - - case N2LM_ALL_ON: - n2lm_timer_stop_all(); - n2lm_ledon(LED_ALL); - break; - - case N2LM_ALL_OFF: - n2lm_timer_stop_all(); - n2lm_ledoff(LED_ALL); - break; - - default: - return -EINVAL; - } - - return NOERR; -} - -static struct file_operations n2lm_fops = { - .owner = THIS_MODULE, - .ioctl = n2lm_ioctl, -}; -//================================================================================================== -// We can't do anything fancy here since the system tick rate is far below that required to -// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until -// I get up to speed on the timers. The saving grace is that for the normal uses, nothing -// important should be haprepening. -//================================================================================================== - -static void n2_buzz(int tone_delay, int duration) -{ - int i; - - *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; - - for (i = 1; i < duration; i++) { - *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; - udelay(tone_delay); - *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; - udelay(tone_delay); - } - *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; - - return; -} -//================================================================================================= - -// this handles the buzzer duty cycle -static void n2bz_handler(unsigned long data) -{ - if (--bz_repeatcnt > 0) { //if just one beep left to do - n2bz_timer.expires = jiffies + ontime + offtime; //next timeout - add_timer(&n2bz_timer); //reinit timer - } - n2_buzz(tone/2, ontime); - printk(KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime); - return; -} - -//================================================================================================== - -static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) -{ - switch (cmd) { - case N2BZ_BEEP: - n2_buzz(tone/2, ontime); - break; - - case N2BZ_BEEP_STOP: - del_timer(&n2bz_timer); - break; - - case N2BZ_BEEPS: - if (param == 0) - bz_repeatcnt = 0xffffffff; - else - bz_repeatcnt = param; - n2bz_handler(0); - break; - - case N2BZ_TONESET: - if (param >= 250 && param <= 2000) - tone = param; - break; - - case N2BZ_ONTIME: - if (param > 4 && param < 201) - ontime = param; - break; - - case N2BZ_SILENTTIME: - if (param > ontime) //enforce a reasonable duty cycle - offtime = param; - else - offtime = ontime; - break; - - case N2BZ_REPEATCNT: - if (param == 0) - bz_repeatcnt = 0xffffffff; - else - bz_repeatcnt = param; - break; - - case N2BZ_COMBINED: - bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 - ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies - offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies - tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 - break; - - default: - break; - } - return NOERR; -} - -static struct file_operations n2bz_fops = { - .owner = THIS_MODULE, - .ioctl = n2bz_ioctl, -}; - -//================================================================================================== - -static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) -{ - void *ret; - - wake_up(&n2pb_waitq); - remove_proc_entry(PWR_OFF_STR, NULL); //no parent - n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); - ret = create_proc_entry(PWR_OFF_STR, 0, NULL); - printk(KERN_DEBUG "cpe ret = %p\n", ret); - -// WARNING: This is RUDE...it unconditionally pulls the power plug. -// Your data will be at risk...since this is just a test system -// I am leaving it enabled...eventually userland needs to get the -// message, do an orderly shutdown and use an ioctl or something in -// /proc/powerdowm to actually have us pull the plug. - - *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio - *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed - - return IRQ_HANDLED; -} - -//================================================================================================== -// -//static void do_rb_timeout(unsigned long data) -//{ -// int i; -// -// for (i = 0; i < rb_presses; i++) -// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); -// return; -//} -// -//================================================================================================== -// does nothing -- waiting for userland to define -// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so -// we hang in a loop until the button is no longer pressed - -struct testr { - int ctl; - long param; -}; - -static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) -{ - - static struct testr test[] = { - N2LM_ALL_OFF,0, - N2LM_ON,0, - N2LM_OFF,0, - N2LM_ON,1, - N2LM_ALL_OFF,1, - N2LM_ON,2, - N2LM_OFF,2, - N2LM_ON,3, - N2LM_OFF,3, - N2LM_BLINK,0, - N2LM_OFF,0, - N2LM_BLINK,1, - N2LM_OFF,1, - N2LM_BLINK,2, - N2LM_OFF,2, - N2LM_BLINK,3, - N2LM_OFF,3, - N2LM_ALL_OFF,0, - N2LM_ALT,1, - N2LM_OFF,1, - N2LM_ALL_ON,0 - }; - - printk("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long)); - - wake_up(&n2rb_waitq); - while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) - ; //wait for button release - - if (rb_presses > 20) - rb_presses = 0; - tone = (rb_presses * 50) + 200; - ontime = (rb_presses*10) + 100; - offtime = 500 - (rb_presses*20); - printk("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone); - rb_presses++; - - n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); - n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); -// if (rb_presses == 0) { -// init_jiffy = jiffies; -// init_timer (&n2rb_timer); -// n2rb_timer.function = do_rb_timeout; -// }; -// -// if (rb_presses == 8) -// rb_presses = 0; -// if (rb_presses & 1) -// n2lm_ledon(test[rb_presses]); -// else -// n2lm_ledoff(test[rb_presses]); -// -// n2rb_timer.expires = (jiffies + RB_DELAY); -// add_timer (&n2rb_timer); -// if (rb_presses < 5) { -// if (rb_presses > 0) -// n2lm_ledoff(rb_presses); -// n2lm_ledon(++rb_presses); -// n2lm_timer_start(rb_presses); -// }; - - printk(KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies); - return IRQ_HANDLED; - -} - -//================================================================================================== -// What to do here is majorly undetermined... - -static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -{ - printk(KERN_DEBUG "Reset Button Wait\n"); - interruptible_sleep_on(&n2rb_waitq); - return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; - -} - -//================================================================================================== -// What to do here is majorly undetermined... - -static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -{ - printk(KERN_DEBUG "Power Button Wait\n"); - interruptible_sleep_on(&n2pb_waitq); - return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; - -} - -//-------------------------------------------------------------------------------------------------- - -static struct file_operations n2rb_fops = { - .owner = THIS_MODULE, - .read = n2rb_read, -}; - -//-------------------------------------------------------------------------------------------------- - -static struct file_operations n2pb_fops = { - .owner = THIS_MODULE, - .read = n2pb_read, -}; - -//================================================================================================== - -static void n2iom_initarch(void) -{ - printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); - - *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr - gpio_line_config(N2_RB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_isr_clear(N2_RB_GPIO); - gpio_line_config(N2_PB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_HIGH); - gpio_line_isr_clear(N2_PB_GPIO); - - init_timer(&n2lm_rsg_timer); - init_timer(&n2lm_rsr_timer); - init_timer(&n2lm_d1_timer); - init_timer(&n2lm_d2_timer); -// init_timer(&n2rb_timer); -// init_timer(&n2pb_timer); - init_timer(&n2bz_timer); - n2lm_rsr_timer.function = n2lm_rsr_handler; - n2lm_rsg_timer.function = n2lm_rsg_handler; - n2lm_d2_timer.function = n2lm_d2_handler; - n2lm_d1_timer.function = n2lm_d1_handler; - n2bz_timer.function = n2bz_handler; - n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; - - *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 - *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds - *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; - n2lm_ledon(LED_ALL); - n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_SHORT); - n2lm_ledoff(LED_ALL); -// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit - n2lm_ledon(LED_RS_RED); - - return; -} - -//================================================================================================== - -static int __init n2iom_init(void) -{ - printk(KERN_INFO "OpenN2 Misc I/O Driver Version %s\n", VERSION); - - init_jiffy = jiffies; - printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); - n2iom_initarch(); - - if (register_chrdev(N2RB_MAJOR, "n2_rbm", &n2pb_fops) < NOERR) { - printk(KERN_DEBUG "Reset Button Major %d not available\n", N2RB_MAJOR); - return -EBUSY; - } - if (register_chrdev(N2PB_MAJOR, "n2_pbm", &n2rb_fops) < NOERR) { - printk(KERN_DEBUG "Power Button Major %d not available\n", N2PB_MAJOR); - return -EBUSY; - } - if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { - printk(KERN_DEBUG "Led Manager Major %d not available\n", N2LM_MAJOR); - return -EBUSY; - } - if (register_chrdev(N2BZ_MAJOR, "n2_bzm", &n2bz_fops) < NOERR) { - printk(KERN_DEBUG "Buzzer Major %d not available\n", N2BZ_MAJOR); - return -EBUSY; - } - - if (request_irq(N2RB_IRQ, &n2rb_handler, SA_INTERRUPT, "n2_rb", NULL) < NOERR) { - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", N2RB_IRQ); - return -EIO; - } - if (request_irq(N2PB_IRQ, &n2pb_handler, SA_INTERRUPT, "n2_pb", NULL) < NOERR) { - printk(KERN_DEBUG "Power Button IRQ %d not available\n", N2PB_IRQ); - return -EIO; - } - - enable_irq(N2PB_IRQ); - enable_irq(N2RB_IRQ); - return (NOERR); -} - -//================================================================================================== - -static void __exit n2iom_exit(void) -{ - remove_proc_entry(PWR_OFF_STR, NULL); - del_timer(&n2rb_timer); - free_irq(N2RB_IRQ,NULL); - unregister_chrdev(N2PB_MAJOR, "n2pb"); - del_timer(&n2pb_timer); - free_irq(N2PB_IRQ, NULL); - unregister_chrdev(N2RB_MAJOR, "n2rb" ); - del_timer(&n2lm_rsg_timer); - del_timer(&n2lm_rsr_timer); - del_timer(&n2lm_d1_timer); - del_timer(&n2lm_d2_timer); - unregister_chrdev(N2LM_MAJOR, "n2lm" ); -} - -module_init (n2iom_init); -module_exit (n2iom_exit); - -MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -MODULE_DESCRIPTION("OpenN2 Buttons/LEDs IO Driver"); -MODULE_LICENSE("GPL"); -static int debug = 7; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debugging enabled = 8"); - diff --git a/packages/linux/openslug-kernel-2.6.11/nslu2-part.c b/packages/linux/openslug-kernel-2.6.11/nslu2-part.c deleted file mode 100644 index 6fbf952e2a..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/nslu2-part.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * nslu2-part.c - * - * Maintainers: http://www.nslu2-linux.org/ - * Initial port: Mark Rakes <mrakes AT mac.com> - * - * "Parse" the fixed partition table of the Linksys NSLU2 and - * produce a Linux partition array to match. - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -/* info we know about the NSLU2's flash setup: - * - * Num Partition offset size - * --- --------- ---------- ----------- - * 0 RedBoot 0x00000000 0x00040000 - * 1 System Configuration 0x00040000 0x00020000 - * 2 Kernel 0x00060000 0x00100000 - * 3 Ramdisk 0x00160000 0x006a0000 - */ - #define NSLU2_NUM_FLASH_PARTITIONS 4 - #define NSLU2_FLASH_PART0_NAME "RedBoot" - #define NSLU2_FLASH_PART0_OFFSET 0x00000000 - #define NSLU2_FLASH_PART0_SIZE 0x00040000 - #define NSLU2_FLASH_PART1_NAME "System Configuration" - #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) - #define NSLU2_FLASH_PART1_SIZE 0x00020000 - #define NSLU2_FLASH_PART2_NAME "Kernel" - #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) - #define NSLU2_FLASH_PART2_SIZE 0x00100000 - #define NSLU2_FLASH_PART3_NAME "Ramdisk" - #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) - #define NSLU2_FLASH_PART3_SIZE 0x006a0000 - -static int parse_nslu2_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long flash_start) -{ - struct mtd_partition *parts; - int ret = 0, namelen = 0; - char *names; - - namelen = strlen(NSLU2_FLASH_PART0_NAME) + - strlen(NSLU2_FLASH_PART1_NAME) + - strlen(NSLU2_FLASH_PART2_NAME) + - strlen(NSLU2_FLASH_PART3_NAME) + - NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ - - parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); - if (!parts) { - ret = -ENOMEM; - goto out; - } - - memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); - names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; - - /* RedBoot partition */ - parts[0].size = NSLU2_FLASH_PART0_SIZE; - parts[0].offset = NSLU2_FLASH_PART0_OFFSET; - parts[0].name = NSLU2_FLASH_PART0_NAME; - parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART0_NAME); - names += strlen(names)+1; - /* System Configuration */ - parts[1].size = NSLU2_FLASH_PART1_SIZE; - parts[1].offset = NSLU2_FLASH_PART1_OFFSET; - parts[1].name = NSLU2_FLASH_PART1_NAME; - parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART1_NAME); - names += strlen(names)+1; - /* Kernel */ - parts[2].size = NSLU2_FLASH_PART2_SIZE; - parts[2].offset = NSLU2_FLASH_PART2_OFFSET; - parts[2].name = NSLU2_FLASH_PART2_NAME; - parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART2_NAME); - names += strlen(names)+1; - /* Ramdisk */ - parts[3].size = NSLU2_FLASH_PART3_SIZE; - parts[3].offset = NSLU2_FLASH_PART3_OFFSET; - parts[3].name = NSLU2_FLASH_PART3_NAME; - parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART3_NAME); - names += strlen(names)+1; - - ret = NSLU2_NUM_FLASH_PARTITIONS; - *pparts = parts; - out: - return ret; -} - -static struct mtd_part_parser nslu2_parser = { - .owner = THIS_MODULE, - .parse_fn = parse_nslu2_partitions, - .name = "NSLU2", -}; - -static int __init nslu2_parser_init(void) -{ - return register_mtd_parser(&nslu2_parser); -} - -static void __exit nslu2_parser_exit(void) -{ - deregister_mtd_parser(&nslu2_parser); -} - -module_init(nslu2_parser_init); -module_exit(nslu2_parser_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mark Rakes"); -MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); diff --git a/packages/linux/openslug-kernel-2.6.11/nslu2-pci.c b/packages/linux/openslug-kernel-2.6.11/nslu2-pci.c deleted file mode 100644 index 7327c65a4f..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/nslu2-pci.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-pci.c - * - * NSLU2 board-level PCI initialization - * - * based on ixdp425-pci.c: - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -// However, all the common PCI setup code presumes the standard 4 PCI -// interrupts are available. So we compromise...we don't enable the -// IRQ on Pin 8 but we let - -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/delay.h> - -#include <asm/mach/pci.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> - -void __init nslu2_pci_preinit(void) -{ - gpio_line_config(NSLU2_PCI_INTA_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(NSLU2_PCI_INTB_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(NSLU2_PCI_INTC_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -// gpio_line_config(NSLU2_PCI_INTD_PIN, -// IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - - gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); -// gpio_line_isr_clear(NSLU2_PCI_INTD_PIN); - - ixp4xx_pci_preinit(); -} - -static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { - IRQ_NSLU2_PCI_INTA, - IRQ_NSLU2_PCI_INTB, - IRQ_NSLU2_PCI_INTC, -// IRQ_NSLU2_PCI_INTD - }; - - int irq = -1; - - if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && - pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11 - } - - return irq; -} - -struct hw_pci __initdata nslu2_pci = { - .nr_controllers = 1, - .preinit = nslu2_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, - .map_irq = nslu2_map_irq, -}; - -int __init nslu2_pci_init(void) //monkey see, monkey do -{ - if (machine_is_nslu2()) - pci_common_init(&nslu2_pci); - return 0; -} - -subsys_initcall(nslu2_pci_init); - diff --git a/packages/linux/openslug-kernel-2.6.11/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.11/nslu2-setup.c deleted file mode 100644 index 5c08affd5d..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/nslu2-setup.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-setup.c - * - * NSLU2 board-setup - * - * based ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Author: Mark Rakes <mrakes at mac.com> - * Maintainers: http://www.nslu2-linux.org/ - * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#ifdef __ARMEB__ -#define REG_OFFSET 3 -#else -#define REG_OFFSET 0 -#endif - -/* - * NSLU2 uses only one serial port - */ -static struct uart_port nslu2_serial_ports[] = { - { - .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART1_BASE_PHYS), - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 32 - } -#if 0 - , { - .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART2_BASE_PHYS), - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 1, - .type = PORT_XSCALE, - .fifosize = 32 - } -#endif -}; - -void __init nslu2_map_io(void) -{ - early_serial_setup(&nslu2_serial_ports[0]); -#if 0 - early_serial_setup(&nslu2_serial_ports[1]); -#endif - ixp4xx_map_io(); -} - -static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nslu2_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &nslu2_flash_data, - }, - .num_resources = 1, - .resource = &nslu2_flash_resource, -}; - -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { - .sda_pin = NSLU2_SDA_PIN, - .scl_pin = NSLU2_SCL_PIN, -}; - -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", - .id = 0, - .dev = { - .platform_data = &nslu2_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash -}; - -static void __init nslu2_init(void) -{ - platform_add_devices(&nslu2_devices, ARRAY_SIZE(nslu2_devices)); -} - -MACHINE_START(NSLU2, "Linksys NSLU2") - MAINTAINER("www.nslu2-linux.org") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(nslu2_map_io) - INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here - .timer = &ixp4xx_timer, - // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? - BOOT_PARAMS(0x0100) - INIT_MACHINE(nslu2_init) -MACHINE_END diff --git a/packages/linux/openslug-kernel-2.6.11/nslu2.h b/packages/linux/openslug-kernel-2.6.11/nslu2.h deleted file mode 100644 index bb79aaa007..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/nslu2.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nslu2.h - * - * NSLU2 platform specific definitions - * - * Author: Mark Rakes <mrakes AT mac.com> - * Maintainers: http://www.nslu2-linux.org - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -// kas11 11-2-04 - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <asm/hardware.h>" -#endif - -#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* - * NSLU2 PCI IRQs - */ -#define NSLU2_PCI_MAX_DEV 3 -#define NSLU2_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NSLU2_PCI_INTA_PIN 11 -#define NSLU2_PCI_INTB_PIN 10 -#define NSLU2_PCI_INTC_PIN 9 -//#define NSLU2_PCI_INTD_PIN 8 - - diff --git a/packages/linux/openslug-kernel-2.6.11/nslu2_2.6.11.patch b/packages/linux/openslug-kernel-2.6.11/nslu2_2.6.11.patch deleted file mode 100644 index bff8400396..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/nslu2_2.6.11.patch +++ /dev/null @@ -1,159 +0,0 @@ -diff -urN linux-2.6.11.orig/arch/arm/boot/compressed/head.S linux-2.6.11/arch/arm/boot/compressed/head.S ---- linux-2.6.11.orig/arch/arm/boot/compressed/head.S 2005-03-01 21:38:25.000000000 -1000 -+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-03-03 00:55:05.000000000 -1000 -@@ -79,6 +79,14 @@ - .endm - .macro writeb, rb - str \rb, [r3, #0] -+ .endm -+#elif defined(CONFIG_ARCH_NSLU2) -+ .macro loadsp, rb -+ mov \rb, #0xc8000000 -+ .endm -+ .macro writeb, rb -+ str \rb, [r3, #0] -+ .endm - #elif defined(CONFIG_ARCH_IXP2000) - .macro loadsp, rb - mov \rb, #0xc0000000 -diff -urN linux-2.6.11.orig/arch/arm/boot/compressed/head-xscale.S linux-2.6.11/arch/arm/boot/compressed/head-xscale.S ---- linux-2.6.11.orig/arch/arm/boot/compressed/head-xscale.S 2005-03-01 21:37:52.000000000 -1000 -+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-03-02 01:41:31.000000000 -1000 -@@ -47,3 +47,8 @@ - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) - #endif - -+#ifdef CONFIG_ARCH_NSLU2 -+ mov r7, #(MACH_TYPE_NSLU2 & 0xff) -+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) -+#endif -+ -diff -urN linux-2.6.11.orig/arch/arm/mach-ixp4xx/Kconfig linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.11.orig/arch/arm/mach-ixp4xx/Kconfig 2005-03-01 21:37:49.000000000 -1000 -+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-03-02 01:43:42.000000000 -1000 -@@ -43,6 +43,12 @@ - IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see Documentation/arm/IXP4xx. - -+config ARCH_NSLU2 -+ bool "NSLU2" -+ help -+ Say 'Y' here if you want your kernel to support Linksys's -+ NSLU2 NAS device. For more information on this platform, -+ see http://www.nslu2-linux.org - - # - # IXCDP1100 is the exact same HW as IXDP425, but with a different machine -diff -urN linux-2.6.11.orig/arch/arm/mach-ixp4xx/Makefile linux-2.6.11/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.11.orig/arch/arm/mach-ixp4xx/Makefile 2005-03-01 21:37:49.000000000 -1000 -+++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile 2005-03-02 01:44:16.000000000 -1000 -@@ -9,4 +9,4 @@ - obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o - obj-$(CONFIG_ARCH_PRPMC1100) += prpmc1100-pci.o prpmc1100-setup.o - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o -- -+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o -diff -urN linux-2.6.11.orig/arch/arm/tools/mach-types linux-2.6.11/arch/arm/tools/mach-types ---- linux-2.6.11.orig/arch/arm/tools/mach-types 2005-03-01 21:38:08.000000000 -1000 -+++ linux-2.6.11/arch/arm/tools/mach-types 2005-03-02 01:44:50.000000000 -1000 -@@ -604,7 +604,7 @@ - roverp7 MACH_ROVERP7 ROVERP7 594 - pr818s MACH_PR818S PR818S 595 - trxpro MACH_TRXPRO TRXPRO 596 --nslu2 MACH_NSLU2 NSLU2 597 -+nslu2 ARCH_NSLU2 NSLU2 597 - e400 MACH_E400 E400 598 - trab MACH_TRAB TRAB 599 - cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 -diff -urN linux-2.6.11.orig/drivers/i2c/chips/Kconfig linux-2.6.11/drivers/i2c/chips/Kconfig ---- linux-2.6.11.orig/drivers/i2c/chips/Kconfig 2005-03-01 21:38:10.000000000 -1000 -+++ linux-2.6.11/drivers/i2c/chips/Kconfig 2005-03-02 01:45:28.000000000 -1000 -@@ -370,5 +370,14 @@ - - This driver can also be built as a module. If so, the module - will be called isp1301_omap. -+config SENSORS_X1205 -+ tristate "Xicor X1205 RTC chip" -+ depends on I2C && EXPERIMENTAL -+ select I2C_SENSOR -+ help -+ If you say yes here you get support for the Xicor x1205 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called x1205-rtc - - endmenu -diff -urN linux-2.6.11.orig/drivers/i2c/chips/Makefile linux-2.6.11/drivers/i2c/chips/Makefile ---- linux-2.6.11.orig/drivers/i2c/chips/Makefile 2005-03-01 21:38:34.000000000 -1000 -+++ linux-2.6.11/drivers/i2c/chips/Makefile 2005-03-02 01:45:54.000000000 -1000 -@@ -35,6 +35,7 @@ - obj-$(CONFIG_SENSORS_VIA686A) += via686a.o - obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG -diff -urN linux-2.6.11.orig/drivers/mtd/maps/ixp4xx.c linux-2.6.11/drivers/mtd/maps/ixp4xx.c ---- linux-2.6.11.orig/drivers/mtd/maps/ixp4xx.c 2005-03-01 21:37:30.000000000 -1000 -+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-03-02 01:46:40.000000000 -1000 -@@ -94,7 +94,11 @@ - struct resource *res; - }; - -+#ifdef CONFIG_ARCH_NSLU2 -+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; -+#else - static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -+#endif - - static int ixp4xx_flash_remove(struct device *_dev) - { -diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h ---- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 21:37:51.000000000 -1000 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-02 17:34:46.000000000 -1000 -@@ -44,5 +44,6 @@ - #include "ixdp425.h" - #include "coyote.h" - #include "prpmc1100.h" -+#include "nslu2.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ -diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h ---- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 21:38:12.000000000 -1000 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-02 01:49:27.000000000 -1000 -@@ -93,4 +93,11 @@ - #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 - #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -+/* -+ * NSLU2 board IRQs -+ */ -+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 -+ - #endif -diff -urN linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h ---- linux-2.6.11.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 21:37:49.000000000 -1000 -+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-03 02:26:29.231822000 -1000 -@@ -52,7 +52,7 @@ - * Expansion BUS Configuration registers - */ - #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) --#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) -+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) - #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) - - /* -diff -urN linux-2.6.11.orig/include/linux/i2c-id.h linux-2.6.11/include/linux/i2c-id.h ---- linux-2.6.11.orig/include/linux/i2c-id.h 2005-03-01 21:38:34.000000000 -1000 -+++ linux-2.6.11/include/linux/i2c-id.h 2005-03-02 01:50:14.000000000 -1000 -@@ -110,6 +110,7 @@ - #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */ - #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ - #define I2C_DRIVERID_SAA7114H 64 /* video decoder */ -+#define I2C_DRIVERID_X1205 0xF0 - - - #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ diff --git a/packages/linux/openslug-kernel-2.6.11/usbnet.patch b/packages/linux/openslug-kernel-2.6.11/usbnet.patch deleted file mode 100644 index 1b3cf3fcb8..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/usbnet.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- linux-2.6.11/drivers/usb/net/usbnet.c_orig 2005-03-03 13:50:54.053237416 -0500 -+++ linux-2.6.11/drivers/usb/net/usbnet.c 2005-03-03 13:53:19.415139048 -0500 -@@ -2404,12 +2404,13 @@ - #endif - size = (sizeof (struct ethhdr) + dev->net->mtu); - -- if ((skb = alloc_skb (size, flags)) == NULL) { -+ if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) { - devdbg (dev, "no rx skb"); - defer_kevent (dev, EVENT_RX_MEMORY); - usb_free_urb (urb); - return; - } -+ skb_reserve (skb, NET_IP_ALIGN); - - entry = (struct skb_data *) skb->cb; - entry->urb = urb; diff --git a/packages/linux/openslug-kernel-2.6.11/x1205-rtc.c b/packages/linux/openslug-kernel-2.6.11/x1205-rtc.c deleted file mode 100644 index 50fbc9e280..0000000000 --- a/packages/linux/openslug-kernel-2.6.11/x1205-rtc.c +++ /dev/null @@ -1,548 +0,0 @@ -/* - x1205 - an 12c driver for the Xicor X1205 RTC - Copyright 2004 Karen Spearel - - please send all reports to: - kas11 at tampabay dot rr dot com - - based on linux/drivers/acron/char/pcf8583.h - Copyright (C) 2000 Russell King - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - - * i2c_adapter is the structure used to identify a physical i2c bus along - * with the access algorithms necessary to access it. - -struct i2c_adapter { - struct module *owner; - unsigned int id; == is algo->id | hwdep.struct->id, for registered values see below - unsigned int class; - struct i2c_algorithm *algo; the algorithm to access the bus - void *algo_data; - - --- administration stuff. - int (*client_register)(struct i2c_client *); - int (*client_unregister)(struct i2c_client *); - - data fields that are valid for all devices - struct semaphore bus_lock; - struct semaphore clist_lock; - - int timeout; - int retries; - struct device dev; the adapter device - struct class_device class_dev; the class device - -#ifdef CONFIG_PROC_FS - No need to set this when you initialize the adapter - int inode; -#endif def CONFIG_PROC_FS - - int nr; - struct list_head clients; - struct list_head list; - char name[I2C_NAME_SIZE]; - struct completion dev_released; - struct completion class_dev_released; -}; -*/ - - -/*========== Driver for the X1205 on the Linksys NSLU2 ==================*/ - -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/bcd.h> -#include <linux/rtc.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/miscdevice.h> -#include <linux/device.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <linux/moduleparam.h> - -#define RTC_GETDATETIME 0 -#define RTC_SETTIME 1 -#define RTC_SETDATETIME 2 - -#define I2C_M_WR 0 // just for consistancy - -// offsets into read buf - add 2 for write buf -#define CCR_SEC 0 -#define CCR_MIN 1 -#define CCR_HOUR 2 -#define CCR_MDAY 3 -#define CCR_MONTH 4 -#define CCR_YEAR 5 -#define CCR_WDAY 6 -#define CCR_Y2K 7 - -#define X1205_I2C_BUS_ADDR 0x6f // hardwired into x1205 -#define X1205_ALM0_BASE 0x00 // Base address of the ALM0 -#define X1205_CCR_BASE 0x30 // Base address of the CCR -#define X1205_SR_ADDR 0x3f // Status Register -#define X1205_SR_WEL 0x02 // Write Enable Latch bit -#define X1205_SR_RWEL 0x04 // Register Write Enable Bit -#define X1205_MILBIT 0x80 // this bit set in ccr.hour for 24 hr mode -#define NOERR 0 -#define RTC_NODATE 0 -#define RTC_DATETOO 1 - -// comment out next line is your x1205 can't do page writes -//#define X1205PAGEWRITE 1 -#ifdef X1205PAGEWRITE -#define DRIVERNAME "Xicor x1205 RTC Driver v0.9.3.3" -#else -#define DRIVERNAME "Xicor x1205 RTC Dvr v0.9.3.3NPW" -#endif - -#define DEBUG KERN_DEBUG - - -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base); -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base); -static int x1205_attach(struct i2c_adapter *adapter); -static int x1205_detach(struct i2c_client *client); -static int x1205_validate_tm(struct rtc_time *tm); -static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); -static int x1205_sync_rtc(void); -static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr); -static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data); - -static struct i2c_driver x1205_driver = { - .owner = THIS_MODULE, - .name = DRIVERNAME, - .id = I2C_DRIVERID_X1205, - .flags = I2C_DF_NOTIFY, - .attach_adapter = &x1205_attach, //we don't need to probe...x1205 is hardwired @ 0x6f - .detach_client = &x1205_detach, - .command = &x1205_command, //this prolly never gets called...used internally tho -}; - -static struct i2c_client x1205_i2c_client = { - .id = I2C_DRIVERID_X1205, - .flags = 0, - .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit - .adapter = NULL, // the adapter we sit on assigned in attach - .driver = &x1205_driver, // and our access routines - .usage_count = 0, // How many accesses currently to this client - .dev = {}, // the device structure - .list = {}, - .name = DRIVERNAME, - .released = {}, -}; - -static struct file_operations rtc_fops = { - owner: THIS_MODULE, - ioctl: x1205_ioctl, - read: x1205_read, -}; - -static struct miscdevice x1205_miscdev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops, -}; -extern int (*set_rtc)(void); -static unsigned epoch = 1900; //coresponds to year 0 -static unsigned rtc_epoch = 2000; -static const unsigned char days_in_mo[] = -{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -//===================================CODE====================================== -// in the routines that deal directly with the x1205 hardware, we use -// rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch -// Epoch is inited as 2000. Time is set to UT -//============================================================================= -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base) -{ - static unsigned char addr[2] = { 0,} ; - unsigned char buf[8]; - struct i2c_msg msgs[2] = { - { client->addr, I2C_M_WR, 2, addr }, //msg 1 = send base address - { client->addr, I2C_M_RD, 8, buf }, //msg 2 = read sequential data - }; - addr[1] = reg_base; - if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { //did we read 2 messages? - printk(KERN_DEBUG "raw x1205 read data - sec-%02x min-%02x hr-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", - buf[0],buf[1],buf[2],buf[3],buf[4],buf[5],buf[6], buf[7]); - tm->tm_sec = BCD2BIN(buf[CCR_SEC]); - tm->tm_min = BCD2BIN(buf[CCR_MIN]); - buf[CCR_HOUR] &= ~X1205_MILBIT; - tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); //hr is 0-23 - tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); - tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); - rtc_epoch = BCD2BIN(buf[CCR_Y2K]) * 100; - tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + rtc_epoch - epoch; - tm->tm_wday = buf[CCR_WDAY]; - printk(KERN_DEBUG "rtc_time output data - sec-%02d min-%02d hr-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday,epoch, rtc_epoch); - } else { - printk(KERN_DEBUG "i2c_transfer Read Error\n"); - return -EIO; - } - - return NOERR; -} -// x1205pagewrite allows writing a block of registers in msg3 even though the x1205 says -// nothing about this in its spec. -// it needs more testing as it is possible some x1205s are actually not-completely- -// functional x1226s and there is a reason for the multiple write to not be in the spec. -// anyhow, it is enabled for the time being...and we even push out luck by sending 10 bytes - -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base) -{ - static unsigned char wel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL }; - static unsigned char rwel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL | X1205_SR_RWEL }; - static unsigned char diswe[3] = { 0, X1205_SR_ADDR, 0 }; - -#ifdef X1205PAGEWRITE - - static unsigned char buf[10] = { 0, X1205_CCR_BASE, }; - struct i2c_msg msgs[4] = { - { client->addr, I2C_M_WR, 3, wel }, //msg 1 = write WEL to to ccr sr - { client->addr, I2C_M_WR, 3, rwel }, //msg 2 = write RWEL to ccr sr - { client->addr, I2C_M_WR, 10, buf }, //msg 3 = write ccr base addr +seq data - { client->addr, I2C_M_WR, 3, diswe }, //msg 4 = 0 to ccr sr to disable writes - }; - - msgs[2].len = 5; // 5 bytes + addr to set time only - buf [1] = reg_base; - buf[CCR_SEC+2] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN+2] = BIN2BCD(tm->tm_min); - buf[CCR_HOUR+2] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format - if (datetoo == 1) { - buf[CCR_MDAY+2] = BIN2BCD(tm->tm_mday); - buf[CCR_MONTH+2] = BIN2BCD(tm->tm_mon); // input is 0-11 - buf[CCR_YEAR+2] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 - buf[CCR_WDAY+2] = tm->tm_wday & 7; - buf[CCR_Y2K+2] = BIN2BCD((rtc_epoch/100)); - msgs[2].len += 5; //5 more bytes to set date - } - printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); - printk(KERN_DEBUG "BCD write data - sec-%02x min-%02x hour-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", - buf[2],buf[3],buf[4],buf[5],buf[6], buf[7], buf[8], buf[9]); - - if ((i2c_transfer(client->adapter, msgs, 4)) != 4) - return -EIO; - return NOERR; - -#else //do this if page writes aren't working - - int i,xfer; - static unsigned char data[3] = { 0,}; - static unsigned char buf[8]; - - buf[CCR_SEC] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN] = BIN2BCD(tm->tm_min); - buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format - if (datetoo == 1) { - buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); - buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); // input is 0-11 - buf[CCR_YEAR] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 - buf[CCR_WDAY] = tm->tm_wday & 7; - buf[CCR_Y2K] = BIN2BCD((rtc_epoch/100)); - } - printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); - - xfer = i2c_master_send(client, wel, 3); - printk(KERN_DEBUG "wen - %x\n", xfer); - if (xfer != 3) - return -EIO; - - xfer = i2c_master_send(client, rwel, 3); - printk(KERN_DEBUG "wenb - %x\n", xfer); - if (xfer != 3) - return -EIO; - - for (i = 0; i < 8; i++) { - data[1] = i + reg_base; - data[2] = buf[i]; - xfer = i2c_master_send(client, data, 3); - printk(KERN_DEBUG "xfer - %d addr - %02x data - %02x\n", xfer, data[1], data[2]); - if (xfer != 3) - return -EIO; - }; - - xfer = i2c_master_send(client, diswe, 3); - printk(KERN_DEBUG "wdis - %x\n", xfer); - if (xfer != 3) - return -EIO; - return NOERR; -#endif -} -//============================================================================= - -static int x1205_attach(struct i2c_adapter *adapter) -{ - struct rtc_time tm; - struct timespec tv; - int errno; - - x1205_i2c_client.adapter = adapter; - x1205_i2c_client.id++; - - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver - return -EIO; - - if ((errno = i2c_attach_client(&x1205_i2c_client)) != NOERR) - return errno; - - tv.tv_nsec = tm.tm_sec * 10000000; - tv.tv_sec = mktime(tm.tm_year+epoch, tm.tm_mon, tm.tm_mday, tm.tm_hour, - tm.tm_min, tm.tm_sec); - do_settimeofday(&tv); - set_rtc = x1205_sync_rtc; - - printk(KERN_DEBUG "%s attached on adapter %s\n",x1205_i2c_client.name, - x1205_i2c_client.adapter->name); //why is this name a null string? - - return NOERR; -} - -static int x1205_detach(struct i2c_client *client) -{ - int errno; - - if ((errno = i2c_detach_client(client)) != 0) { - printk(KERN_DEBUG "i2c_detach failed - errno = %d\n", errno); - return errno; - } - - return NOERR; -} - -// make sure the rtc_time values are in bounds -static int x1205_validate_tm(struct rtc_time *tm) -{ - tm->tm_year += 1900; - - if (tm->tm_year < 1970) - return -EINVAL; - - if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) - return -EINVAL; - - if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && - ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) - return -EINVAL; - - if ((tm->tm_year -= epoch) > 255) - return -EINVAL; - - if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) - return -EINVAL; - return NOERR; -} - -static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) -{ - int errno, dodate = RTC_DATETOO; - - if (client == NULL || tm == NULL) - return -EINVAL; - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - printk(KERN_DEBUG "x1205_command %d\n", cmd); - - switch (cmd) { - case RTC_GETDATETIME: - return x1205_get_datetime(client, tm, X1205_CCR_BASE); - - case RTC_SETTIME: // note fall thru - dodate = RTC_NODATE; - case RTC_SETDATETIME: - if ((errno = x1205_validate_tm(tm)) < NOERR) - return errno; - return x1205_set_datetime(client, tm, dodate, X1205_CCR_BASE); - - default: - return -EINVAL; - } -} - -static int x1205_sync_rtc(void) -{ - struct rtc_time new_tm, old_tm; - unsigned long cur_secs = xtime.tv_sec; - - printk(KERN_DEBUG "x1205_sync_rtc entry\n"); - - if (x1205_command(&x1205_i2c_client, RTC_GETDATETIME, &old_tm)) - return 0; - -// xtime.tv_nsec = old_tm.tm_sec * 10000000; //FIXME: - new_tm.tm_sec = cur_secs % 60; - cur_secs /= 60; - new_tm.tm_min = cur_secs % 60; - cur_secs /= 60; - new_tm.tm_hour = cur_secs % 24; - - /* - * avoid writing when we're going to change the day - * of the month. We will retry in the next minute. - * This basically means that if the RTC must not drift - * by more than 1 minute in 11 minutes. - */ - if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || - (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) - return 1; - printk(KERN_DEBUG "x1205_sync_rtc exit\n"); - - return x1205_command(&x1205_i2c_client, RTC_SETTIME, &new_tm); -} - -static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr) -{ - struct rtc_time tm; - - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return -EIO; - return copy_to_user(buf, &tm, sizeof(tm)) ? -EFAULT : NOERR; -} - -//============================================================================== - -static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_time tm; - int errno; - - printk(KERN_DEBUG "ioctl = %x\n", cmd); - - switch (cmd) { - case RTC_RD_TIME: - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return -EIO; - break; - - case RTC_SET_TIME: - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - if ((errno = x1205_validate_tm(&tm)) < NOERR) - return errno; - return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_CCR_BASE); - - case RTC_ALM_SET: //FIXME: set Control Regs - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_ALM0_BASE); - - case RTC_ALM_READ: - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_ALM0_BASE)) < NOERR) - return -EIO; - break; - - case RTC_EPOCH_READ: - - return put_user (epoch, (unsigned long __user *)arg); - - case RTC_EPOCH_SET: - if (arg < 1900) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - epoch = arg; - return 0; - - default: - return -ENOTTY; - } - return copy_to_user((void __user *)arg, &tm, sizeof tm) ? -EFAULT : 0; - -} - -static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) -{ - struct rtc_time tm; - int slen, errno; - - if ((errno = x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return errno; - -// here we return the real year and the month as 1-12 since it is human-readable - slen = sprintf(buf, "rtc_time\t: %02d:%02d:%02d\nrtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year + 1900, tm.tm_mon+1, tm.tm_mday); - printk(KERN_DEBUG "raw rtc_time\t: %02d:%02d:%02d\nraw rtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon, tm.tm_mday); - - if (slen <= off + len) - *eof = 1; - *start = buf + off; - slen -= off; - if (slen > len) - slen = len; - if ( slen < 0 ) - slen = 0; - - return slen; -} - -static int __init x1205_init(void) -{ - struct rtc_time tm; - int errno; - printk(KERN_INFO "LOADED %s\n", DRIVERNAME); - - if ((errno = i2c_add_driver(&x1205_driver)) != NOERR) { - dev_dbg(x1205_i2c_client.dev, "x1205_init failed - errno = %d\n", errno); - return (errno); - } - if ((errno = misc_register(&x1205_miscdev)) != NOERR) { - dev_dbg(x1205_i2c_client.dev, "Register Misc Driver failed - errno = %d\n", errno); - i2c_del_driver(&x1205_driver); - return errno; - } - if (create_proc_read_entry("driver/rtc", 0, NULL, x1205_read_proc, NULL) < NOERR) - return -ENOMEM; - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functionality - return -EIO; - - return NOERR; -} - -static void __exit x1205_exit(void) -{ - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&x1205_miscdev); - i2c_del_driver(&x1205_driver); - set_rtc = NULL; -} - -MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -MODULE_DESCRIPTION("Xicor X1205-RTC Driver"); -MODULE_LICENSE("GPL"); -static int debug = 7; -module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging enabled = 1"); - -module_init(x1205_init); -module_exit(x1205_exit); diff --git a/packages/linux/openslug-kernel-2.6.7/.mtn2git_empty b/packages/linux/openslug-kernel-2.6.7/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/openslug-kernel-2.6.7/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/openslug-kernel-2.6.7/arm-Makefile.patch b/packages/linux/openslug-kernel-2.6.7/arm-Makefile.patch deleted file mode 100644 index fa059f29cd..0000000000 --- a/packages/linux/openslug-kernel-2.6.7/arm-Makefile.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- linux-2.6.7/arch/arm/Makefile.orig 2004-06-15 22:19:13.000000000 -0700 -+++ linux-2.6.7/arch/arm/Makefile 2004-09-19 21:47:58.000000000 -0700 -@@ -55,8 +55,8 @@ - tune-$(CONFIG_CPU_V6) :=-mtune=strongarm - - # Need -Uarm for gcc < 3.x --CFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm --AFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -msoft-float -Wa,-mno-fpu -+CFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -msoft-float -Uarm -+AFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -msoft-float - - #Default value - DATAADDR := . diff --git a/packages/linux/openslug-kernel-2.6.7/arm-timer.patch b/packages/linux/openslug-kernel-2.6.7/arm-timer.patch deleted file mode 100644 index b36df4fe7c..0000000000 --- a/packages/linux/openslug-kernel-2.6.7/arm-timer.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- linux-2.6.7/arch/arm/mach-ixp4xx/common.c.orig 2004-09-26 15:32:52.000000000 -0400 -+++ linux-2.6.7/arch/arm/mach-ixp4xx/common.c 2004-09-26 15:33:34.000000000 -0400 -@@ -223,13 +223,7 @@ static irqreturn_t ixp4xx_timer_interrup - /* Clear Pending Interrupt by writing '1' to it */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; - -- /* -- * Catch up with the real idea of time -- */ -- do { -- do_timer(regs); -- last_jiffy_time += LATCH; -- } while((*IXP4XX_OSTS - last_jiffy_time) > LATCH); -+ do_timer(regs); - - return IRQ_HANDLED; - } diff --git a/packages/linux/openslug-kernel-2.6.7/defconfig b/packages/linux/openslug-kernel-2.6.7/defconfig deleted file mode 100644 index 1e6a933531..0000000000 --- a/packages/linux/openslug-kernel-2.6.7/defconfig +++ /dev/null @@ -1,1097 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_HOTPLUG=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_ADIFCC is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE_PB is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -CONFIG_ARCH_IXDP425=y -CONFIG_ARCH_IXCDP1100=y -# CONFIG_ARCH_PRPMC1100 is not set -CONFIG_ARCH_IXDP4XX=y - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y -CONFIG_DMABOUNCE=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# General setup -# -CONFIG_PCI=y -# CONFIG_ZBOOT_ROM is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Generic Driver Options -# -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -CONFIG_PM=y -# CONFIG_PREEMPT is not set -CONFIG_APM=y -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000 console=ttyS0,115200n8" -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_FWMARK=y -CONFIG_IP_ROUTE_NAT=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_TOS=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -# CONFIG_IP_VS_PROTO_TCP is not set -# CONFIG_IP_VS_PROTO_UDP is not set -# CONFIG_IP_VS_PROTO_ESP is not set -# CONFIG_IP_VS_PROTO_AH is not set - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -# CONFIG_IP_VS_SED is not set -# CONFIG_IP_VS_NQ is not set - -# -# IPVS application helper -# -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_HFSC is not set -CONFIG_NET_SCH_CSZ=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_DELAY is not set -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=m -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=m -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -CONFIG_SENSORS_EEPROM=y -CONFIG_SENSORS_X1205=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# Misc devices -# - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_UHCI_HCD=m -# CONFIG_USB_SL811HS is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Human Interface Devices (HID) -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -# CONFIG_USB_CATC is not set -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_TEST is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# Kernel hacking -# -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/openslug-kernel-2.6.7/ipx4xx-pci.patch b/packages/linux/openslug-kernel-2.6.7/ipx4xx-pci.patch deleted file mode 100644 index 31be5fb874..0000000000 --- a/packages/linux/openslug-kernel-2.6.7/ipx4xx-pci.patch +++ /dev/null @@ -1,9 +0,0 @@ ---- linux-2.6.7/arch/arm/mach-ixp4xx/common-pci.c.orig 2004-09-25 04:06:48.000000000 -0400 -+++ linux-2.6.7/arch/arm/mach-ixp4xx/common-pci.c 2004-09-25 04:07:31.000000000 -0400 -@@ -540,4 +540,6 @@ - EXPORT_SYMBOL(pci_set_dma_mask); - EXPORT_SYMBOL(pci_dac_set_dma_mask); - EXPORT_SYMBOL(pci_set_consistent_dma_mask); -+EXPORT_SYMBOL(ixp4xx_pci_read); -+EXPORT_SYMBOL(ixp4xx_pci_write); - diff --git a/packages/linux/openslug-kernel-2.6.7/x1205-rtc.patch b/packages/linux/openslug-kernel-2.6.7/x1205-rtc.patch deleted file mode 100644 index 72c2bf91b9..0000000000 --- a/packages/linux/openslug-kernel-2.6.7/x1205-rtc.patch +++ /dev/null @@ -1,142 +0,0 @@ ---- drivers/i2c/chips/Kconfig.orig 2004-06-16 01:19:35.000000000 -0400 -+++ drivers/i2c/chips/Kconfig 2004-09-22 18:09:48.454794342 -0400 -@@ -240,6 +240,16 @@ - This driver can also be built as a module. If so, the module - will be called pcf8591. - -+config SENSORS_X1205 -+ tristate "Xicor X1205 RTC chip" -+ depends on I2C && EXPERIMENTAL -+ select I2C_SENSOR -+ help -+ If you say yes here you get support for the Xicor x1205 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called x1205-rtc -+ - config SENSORS_RTC8564 - tristate "Epson 8564 RTC chip" - depends on I2C && EXPERIMENTA ---- drivers/i2c/chips/Makefile.old 2004-06-16 01:20:26.000000000 -0400 -+++ drivers/i2c/chips/Makefile 2004-09-22 16:48:06.435580334 -0400 -@@ -25,6 +25,7 @@ - obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o - obj-$(CONFIG_SENSORS_VIA686A) += via686a.o - obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o -+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG - ---- arch/arm/mach-ixp4xx/ixp425-time.c.old 1969-12-31 19:00:00.000000000 -0500 -+++ arch/arm/mach-ixp4xx/ixp425-time.c 2004-09-22 23:30:54.165988077 -0400 -@@ -0,0 +1,87 @@ -+/* -+ * arch/arm/mach-ixp425/ixp425-time.c -+ * -+ * Timer tick for IXP425 based sytems. We use OS timer1 on the CPU. -+ * -+ * Author: Peter Barry -+ * Copyright: (C) 2001 Intel Corporation. -+ * -+ * Maintainer: Deepak Saxena <dsaxena@mvista.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+ -+#include <linux/config.h> -+#include <linux/module.h> -+#include <linux/sched.h> -+#include <linux/kernel.h> -+#include <linux/interrupt.h> -+#include <linux/time.h> -+#include <linux/init.h> -+#include <linux/smp.h> -+ -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <asm/irq.h> -+ -+#include <linux/timex.h> -+#include <asm/hardware.h> -+ -+ -+extern int setup_arm_irq(int, struct irqaction *); -+ -+/* IRQs are disabled before entering here from do_gettimeofday() */ -+static unsigned long ixp425_gettimeoffset(void) -+{ -+ u32 elapsed, usec, curr, reload; -+ -+ /* -+ * We need elapsed timer ticks since last interrupt -+ * -+ * Read the CCNT value. The returned value is -+ * between -LATCH and 0, 0 corresponding to a full jiffy -+ */ -+ -+ reload = *IXP425_OSRT1 & ~IXP425_OST_RELOAD_MASK; -+ curr = *IXP425_OST1; -+ -+ /* Corner case when rolling over as int disabled ?? */ -+ elapsed = reload - curr; -+ -+ /* Now convert them to usec */ -+ usec = (unsigned long)(elapsed * tick) / LATCH; -+ -+ return usec; -+} -+ -+static void ixp425_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ /* Clear Pending Interrupt by writing '1' to it */ -+ *IXP425_OSST = IXP425_OSST_TIMER_1_PEND; -+ -+ do_timer(regs); -+} -+ -+extern unsigned long (*gettimeoffset)(void); -+ -+static struct irqaction timer_irq = { -+ name: "IXP425 Timer 1", -+}; -+ -+void __init setup_timer(void) -+{ -+ gettimeoffset = ixp425_gettimeoffset; -+ timer_irq.handler = ixp425_timer_interrupt; -+ -+ /* Clear Pending Interrupt by writing '1' to it */ -+ *IXP425_OSST = IXP425_OSST_TIMER_1_PEND; -+ -+ /* Setup the Timer counter value */ -+ *IXP425_OSRT1 = (LATCH & ~IXP425_OST_RELOAD_MASK) | IXP425_OST_ENABLE; -+ -+ /* Connect the interrupt handler and enable the interrupt */ -+ setup_arm_irq(IRQ_IXP425_TIMER1, &ixp4xx_timer_irq); -+} ---- include/linux/i2c-id.h 2004-06-16 01:18:57.000000000 -0400 -+++ include/linux/i2c-id.h.new 2004-09-23 00:56:30.772429217 -0400 -@@ -101,7 +101,7 @@ - #define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */ - #define I2C_DRIVERID_ADV7170 54 /* video encoder */ - #define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */ -- -+#define I2C_DRIVERID_X1205 0xF0 /* Xicor X1205 RTC */ - - #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ - #define I2C_DRIVERID_EXP1 0xF1 ---- archold/arm/kernel/time.c 2004-06-16 01:19:43.000000000 -0400 -+++ arch/arm/kernel/time.c 2004-10-14 12:28:51.434231567 -0400 -@@ -58,7 +58,7 @@ static int dummy_set_rtc(void) - * hook for setting the RTC's idea of the current time. - */ - int (*set_rtc)(void) = dummy_set_rtc; -- -+EXPORT_SYMBOL(set_rtc); - static unsigned long dummy_gettimeoffset(void) - { - return 0; diff --git a/packages/linux/openslug-kernel-2.6.9/.mtn2git_empty b/packages/linux/openslug-kernel-2.6.9/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/openslug-kernel-2.6.9/alignment.patch b/packages/linux/openslug-kernel-2.6.9/alignment.patch deleted file mode 100644 index 19abca18f5..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/alignment.patch +++ /dev/null @@ -1,85 +0,0 @@ ---- linux-2.6.10/arch/arm/mm/alignment.c.broken 2005-02-11 20:57:58.353668651 +0100 -+++ linux-2.6.10/arch/arm/mm/alignment.c 2005-02-11 20:58:02.141660877 +0100 -@@ -130,6 +130,18 @@ - #define TYPE_LDST 2 - #define TYPE_DONE 3 - -+#ifdef __ARMEB__ -+#define BE 1 -+#define FIRST_BYTE_16 "mov %1, %1, ror #8\n" -+#define FIRST_BYTE_32 "mov %1, %1, ror #24\n" -+#define NEXT_BYTE "ror #24" -+#else -+#define BE 0 -+#define FIRST_BYTE_16 -+#define FIRST_BYTE_32 -+#define NEXT_BYTE "lsr #8" -+#endif -+ - #define __get8_unaligned_check(ins,val,addr,err) \ - __asm__( \ - "1: "ins" %1, [%2], #1\n" \ -@@ -149,9 +161,10 @@ - #define __get16_unaligned_check(ins,val,addr) \ - do { \ - unsigned int err = 0, v, a = addr; \ -- __get8_unaligned_check(ins,val,a,err); \ - __get8_unaligned_check(ins,v,a,err); \ -- val |= v << 8; \ -+ val = v << ((BE) ? 8 : 0); \ -+ __get8_unaligned_check(ins,v,a,err); \ -+ val |= v << ((BE) ? 0 : 8); \ - if (err) \ - goto fault; \ - } while (0) -@@ -165,13 +178,14 @@ - #define __get32_unaligned_check(ins,val,addr) \ - do { \ - unsigned int err = 0, v, a = addr; \ -- __get8_unaligned_check(ins,val,a,err); \ - __get8_unaligned_check(ins,v,a,err); \ -- val |= v << 8; \ -+ val = v << ((BE) ? 24 : 0); \ -+ __get8_unaligned_check(ins,v,a,err); \ -+ val |= v << ((BE) ? 16 : 8); \ - __get8_unaligned_check(ins,v,a,err); \ -- val |= v << 16; \ -+ val |= v << ((BE) ? 8 : 16); \ - __get8_unaligned_check(ins,v,a,err); \ -- val |= v << 24; \ -+ val |= v << ((BE) ? 0 : 24); \ - if (err) \ - goto fault; \ - } while (0) -@@ -185,9 +199,9 @@ - #define __put16_unaligned_check(ins,val,addr) \ - do { \ - unsigned int err = 0, v = val, a = addr; \ -- __asm__( \ -+ __asm__( FIRST_BYTE_16 \ - "1: "ins" %1, [%2], #1\n" \ -- " mov %1, %1, lsr #8\n" \ -+ " mov %1, %1, "NEXT_BYTE"\n" \ - "2: "ins" %1, [%2]\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ -@@ -215,13 +229,13 @@ - #define __put32_unaligned_check(ins,val,addr) \ - do { \ - unsigned int err = 0, v = val, a = addr; \ -- __asm__( \ -+ __asm__( FIRST_BYTE_32 \ - "1: "ins" %1, [%2], #1\n" \ -- " mov %1, %1, lsr #8\n" \ -+ " mov %1, %1, "NEXT_BYTE"\n" \ - "2: "ins" %1, [%2], #1\n" \ -- " mov %1, %1, lsr #8\n" \ -+ " mov %1, %1, "NEXT_BYTE"\n" \ - "3: "ins" %1, [%2], #1\n" \ -- " mov %1, %1, lsr #8\n" \ -+ " mov %1, %1, "NEXT_BYTE"\n" \ - "4: "ins" %1, [%2]\n" \ - "5:\n" \ - " .section .fixup,\"ax\"\n" \ - - diff --git a/packages/linux/openslug-kernel-2.6.9/defconfig b/packages/linux/openslug-kernel-2.6.9/defconfig deleted file mode 100644 index 87c5009449..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/defconfig +++ /dev/null @@ -1,1132 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_HOTPLUG=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=m -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=n -CONFIG_IOSCHED_AS=n -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=n -CONFIG_CC_OPTIMIZE_FOR_SIZE=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_ADIFCC is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE_PB is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -#CONFIG_ARCH_IXDP425=y -#CONFIG_ARCH_IXCDP1100=y -# CONFIG_ARCH_PRPMC1100 is not set -#CONFIG_ARCH_IXDP4XX=y -CONFIG_ARCH_NSLU2=y - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y -CONFIG_DMABOUNCE=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# General setup -# -CONFIG_PCI=y -# CONFIG_ZBOOT_ROM is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Generic Driver Options -# -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -CONFIG_PM=y -# CONFIG_PREEMPT is not set -CONFIG_APM=y -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000 console=ttyS0,115200n8" -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -# CONFIG_MD_LINEAR is not set -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -# CONFIG_MD_MULTIPATH is not set -# CONFIG_BLK_DEV_LVM - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_MULTIPLE_TABLES is not set -# CONFIG_IP_ROUTE_FWMARK is not set -CONFIG_IP_ROUTE_NAT=y -# CONFIG_IP_ROUTE_MULTIPATH is not set -CONFIG_IP_ROUTE_TOS=y -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -# CONFIG_IP_MROUTE is not set -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -# CONFIG_IP_VS_PROTO_TCP is not set -# CONFIG_IP_VS_PROTO_UDP is not set -# CONFIG_IP_VS_PROTO_ESP is not set -# CONFIG_IP_VS_PROTO_AH is not set - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -# CONFIG_IP_VS_SED is not set -# CONFIG_IP_VS_NQ is not set - -# -# IPVS application helper -# -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_XFRM is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_HFSC is not set -CONFIG_NET_SCH_CSZ=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_DELAY is not set -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA2XXX is not set -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=m - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -# CONFIG_SOUND_GAMEPORT is not set -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -CONFIG_SENSORS_EEPROM=y -CONFIG_SENSORS_X1205=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_FS_MBCACHE is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -CONFIG_SMB_FS=m -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# Misc devices -# - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=m -# CONFIG_USB_SL811HS is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Human Interface Devices (HID) -# -# CONFIG_USB_HID is not set -# CONFIG_USB_HIDINPUT is not set -# CONFIG_HID_FF is not set -# CONFIG_HID_PID is not set -# CONFIG_LOGITECH_FF is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -# CONFIG_USB_CATC is not set -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET=m - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_TEST is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# Kernel hacking -# -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/openslug-kernel-2.6.9/double_cpdo.patch b/packages/linux/openslug-kernel-2.6.9/double_cpdo.patch deleted file mode 100644 index 4069358db8..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/double_cpdo.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- linux-2.6.9-rc3-ds1.commit/arch/arm/nwfpe/double_cpdo.c 2004-08-14 07:36:11.000000000 +0200 -+++ linux-2.6.9-rc3-ds1.snap/arch/arm/nwfpe/double_cpdo.c 2004-10-10 20:29:15.514512796 +0200 -@@ -75,7 +75,11 @@ - union float64_components u; - - u.f64 = rFm; -+#ifdef __ARMEB__ -+ u.i[0] ^= 0x80000000; -+#else - u.i[1] ^= 0x80000000; -+#endif - - return u.f64; - } -@@ -85,7 +89,11 @@ - union float64_components u; - - u.f64 = rFm; -+#ifdef __ARMEB__ -+ u.i[0] &= 0x7fffffff; -+#else - u.i[1] &= 0x7fffffff; -+#endif - - return u.f64; - } - diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-io.c b/packages/linux/openslug-kernel-2.6.9/nslu2-io.c deleted file mode 100644 index cd5ed36c15..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2-io.c +++ /dev/null @@ -1,750 +0,0 @@ -//============================================================================= -// -// n2-io.c version 0.1.7 -// Author: Karen Spearel <kas11 at tampabay.rr.com> -// please report problems/bugs directly to the address above -// -// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per -// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk -// -// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, -// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT -// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER -// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. -// -//============================================================================= -// GPIO Function State -// 0 Red LED Status -// 1 Green LED Ready = 1 -// 2 Disk 2 LED On = 0 -// 3 Disk 1 LED On = 0 -// 4 Buzzer -// 5 Power Button Pressed = 1 -// 8 Power Down Output = 1 powers down N2 -// 12 Reset Pressed = 0 -//============================================================================= -// this driver is N2 specific and is purposely designed to do the minimum -// necessary to provide the necessary services given the limited memory resources -// of the N2. As OpenN2 develops, addition features will be added as -// suggested by the community. -// -//============================================================================= - -#include <linux/config.h> -#include <linux/version.h> -#include <linux/module.h> -#include <linux/utsname.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/miscdevice.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> - -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/hardware.h> -#include <asm-arm/irq.h> -#include <asm-arm/delay.h> -#include <asm-arm/signal.h> - - -#define VERSION "0.1.7" - -#define N2RB_MAJOR 60 -#define N2PB_MAJOR 61 -#define N2BZ_MAJOR 62 -#define N2LM_MAJOR 126 - -#define N2PB_IRQ 22 //gpio5 -#define N2RB_IRQ 29 //gpio12 - -#define N2_BEEP_DUR_LONG 2000 -#define N2_BEEP_DUR_MED 400 -#define N2_BEEP_DUR_SHORT 100 -#define N2_BEEP_PITCH_HIGH 250 -#define N2_BEEP_PITCH_MED 500 -#define N2_BEEP_PITCH_LOW 1000 -#define N2_LONG_DELAY 30000 - -#define N2_BZ_GPIO 4 -#define N2_PB_GPIO 5 -#define N2_PO_GPIO 8 //power off -#define N2_RB_GPIO 12 - -#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 -#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 -#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 -#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 - -#define NOERR 0 - -#define RB_DELAY 50 -#define PB_DELAY 20 - -#define PWR_OFF_STR "poweroff" - - -// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe - -#define N2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible -#define N2BZ_BEEP _IO('M',1) //one beep at current defaults -#define N2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults -#define N2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 -#define N2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies -#define N2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies -#define N2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever -#define N2BZ_COMBINED _IOW('M',8,long) //combine all params in a long - -#define N2LM_OFF _IOW('M',32,long) -#define N2LM_ON _IOW('M',33,long) -#define N2LM_BLINK _IOW('M',34,long) -#define N2LM_ALT _IOW('M',35,long) -#define N2LM_ALL_ON _IO('M',36) -#define N2LM_ALL_OFF _IO('M',37) - -#define PHYS_LEDS 4 -#define BLINK_DELAY 25 - -// OR Masks to turn these LEDs ON - -#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 -#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 -#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 - -// AND Masks to turn these LEDs OFF - -#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 -#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 -#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 - -// AND Masks to turn these LEDs ON - -#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 -#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 - -// Or Masks to turn these LEDs OFF - -#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 -#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 - -// EOR masks for toggling LEDs on/off - -#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits -#define RS_GRN_TGL 0x00000002 -#define RS_RED_TGL 0x00000001 -#define DISK1_TGL 0x00000008 -#define DISK2_TGL 0x00000004 - -// The LED names for switches - -#define LED_RS_RED 0 -#define LED_RS_GRN 1 -#define LED_DISK1 2 -#define LED_DISK2 3 -#define LED_ALL 4 - -static unsigned long init_jiffy = 0; //jiffies at init time -static unsigned long rb_presses = 0; //number of reset button presses -static unsigned long ontime = 50; -static unsigned long offtime = 450; -static unsigned long bz_repeatcnt = 10; -static unsigned long tone = 1000; - -DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); -DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); - -static struct timer_list n2lm_rsg_timer; //rs green -static struct timer_list n2lm_rsr_timer; //rs red -static struct timer_list n2lm_d1_timer; //drive 1 -static struct timer_list n2lm_d2_timer; //drive 2 -static struct timer_list n2rb_timer; -static struct timer_list n2pb_timer; -static struct timer_list n2bz_timer; //beeper - -//================================================================================================== -// -// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the -// GPIO output register is xor'd with a mask corresponding to the selected led which simply -// flips that bit. No record of what any of the other leds is doing is needed. -// -//================================================================================================== -// this blinks rs green or green/yellow if rs red is on -static void n2lm_rsg_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led - n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout - add_timer(&n2lm_rsg_timer); //reinit timer - return; -} - -// this blinks or alternates rs red green... inited wit green on/red off -static void n2lm_rsr_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; - n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsr_timer); - return; -} -// blinks disk 1 -static void n2lm_d1_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; - n2lm_d1_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d1_timer); - return; -} -// blinks disk 2 -static void n2lm_d2_handler(unsigned long data) -{ - *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; - n2lm_d2_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d2_timer); - return; -} - -//================================================================================================== - -static void n2lm_timer_start(unsigned long led) -{ - - printk(KERN_DEBUG "timer: %ld\n",led); - - switch(led) { - case LED_RS_RED: - n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsr_timer); - break; - - case LED_RS_GRN: - n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_rsg_timer); - break; - - case LED_DISK1: - n2lm_d1_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d1_timer); - break; - - case LED_DISK2: - n2lm_d2_timer.expires = jiffies + BLINK_DELAY; - add_timer(&n2lm_d2_timer); - break; - - default: - break; - } - return; -} - -//================================================================================================== - -static void n2lm_timer_stop(unsigned long led) -{ - switch (led) { - case LED_RS_RED: - del_timer(&n2lm_rsr_timer); - break; - case LED_RS_GRN: - del_timer(&n2lm_rsg_timer); - break; - case LED_DISK1: - del_timer(&n2lm_d1_timer); - break; - case LED_DISK2: - del_timer(&n2lm_d2_timer); - break; - default: - break; - } - return; -} - -//-------------------------------------------------------------------------------------------------- - -static void n2lm_timer_stop_all(void) -{ - del_timer(&n2lm_rsg_timer); - del_timer(&n2lm_rsr_timer); - del_timer(&n2lm_d1_timer); - del_timer(&n2lm_d2_timer); - return; -} -//-------------------------------------------------------------------------------------------------- - -static void n2lm_ledon(unsigned long led) -{ - - printk(KERN_DEBUG "ledon: %ld\n", led); - - switch (led) { - case LED_RS_RED: - *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 - return; - case LED_RS_GRN: - *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 - return; - case LED_DISK1: - *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffffb - return; - case LED_DISK2: - *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffff7 - return; - case LED_ALL: //all green - *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; - *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); - return; - } -} - -//-------------------------------------------------------------------------------------------------- - -static void n2lm_ledoff(unsigned long led) -{ - - switch (led) { - case LED_RS_RED: - *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe - return; - case LED_RS_GRN: - *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd - return; - case LED_DISK1: - *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000004 - return; - case LED_DISK2: - *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000008 - return; - case LED_ALL: - *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); - *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); - } -} - -//================================================================================================== - -static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) -{ - - printk(KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led); - - if (led < 0 || led >= PHYS_LEDS) - return -EINVAL; - - switch (cmd ) { - case N2LM_ON: - n2lm_timer_stop(led); - n2lm_ledon(led); - break; - - case N2LM_OFF: - n2lm_timer_stop(led); - n2lm_ledoff(led); - break; - - case N2LM_BLINK: - n2lm_ledon(led); - if (led == LED_RS_RED) - n2lm_rsr_timer.data = RS_RED_TGL; - if (led == LED_RS_GRN) - n2lm_rsr_timer.data = RS_GRN_TGL; - n2lm_timer_start(led); - break; - - case N2LM_ALT: - if (led == LED_RS_RED) - { - n2lm_ledon(LED_RS_GRN); - n2lm_ledoff(LED_RS_RED); - n2lm_rsr_timer.data = RS_RG_ALT; - n2lm_timer_start(LED_RS_RED); - break; - } else - return -EINVAL; - - case N2LM_ALL_ON: - n2lm_timer_stop_all(); - n2lm_ledon(LED_ALL); - break; - - case N2LM_ALL_OFF: - n2lm_timer_stop_all(); - n2lm_ledoff(LED_ALL); - break; - - default: - return -EINVAL; - } - - return NOERR; -} - -static struct file_operations n2lm_fops = { - .owner = THIS_MODULE, - .ioctl = n2lm_ioctl, -}; -//================================================================================================== -// We can't do anything fancy here since the system tick rate is far below that required to -// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until -// I get up to speed on the timers. The saving grace is that for the normal uses, nothing -// important should be haprepening. -//================================================================================================== - -static void n2_buzz(int tone_delay, int duration) -{ - int i; - - *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; - - for (i = 1; i < duration; i++) { - *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; - udelay(tone_delay); - *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; - udelay(tone_delay); - } - *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; - - return; -} -//================================================================================================= - -// this handles the buzzer duty cycle -static void n2bz_handler(unsigned long data) -{ - if (--bz_repeatcnt > 0) { //if just one beep left to do - n2bz_timer.expires = jiffies + ontime + offtime; //next timeout - add_timer(&n2bz_timer); //reinit timer - } - n2_buzz(tone/2, ontime); - printk(KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime); - return; -} - -//================================================================================================== - -static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) -{ - switch (cmd) { - case N2BZ_BEEP: - n2_buzz(tone/2, ontime); - break; - - case N2BZ_BEEP_STOP: - del_timer(&n2bz_timer); - break; - - case N2BZ_BEEPS: - if (param == 0) - bz_repeatcnt = 0xffffffff; - else - bz_repeatcnt = param; - n2bz_handler(0); - break; - - case N2BZ_TONESET: - if (param >= 250 && param <= 2000) - tone = param; - break; - - case N2BZ_ONTIME: - if (param > 4 && param < 201) - ontime = param; - break; - - case N2BZ_SILENTTIME: - if (param > ontime) //enforce a reasonable duty cycle - offtime = param; - else - offtime = ontime; - break; - - case N2BZ_REPEATCNT: - if (param == 0) - bz_repeatcnt = 0xffffffff; - else - bz_repeatcnt = param; - break; - - case N2BZ_COMBINED: - bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 - ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies - offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies - tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 - break; - - default: - break; - } - return NOERR; -} - -static struct file_operations n2bz_fops = { - .owner = THIS_MODULE, - .ioctl = n2bz_ioctl, -}; - -//================================================================================================== - -static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) -{ - void *ret; - - wake_up(&n2pb_waitq); - remove_proc_entry(PWR_OFF_STR, NULL); //no parent - n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); - ret = create_proc_entry(PWR_OFF_STR, 0, NULL); - printk(KERN_DEBUG "cpe ret = %p\n", ret); - -// WARNING: This is RUDE...it unconditionally pulls the power plug. -// Your data will be at risk...since this is just a test system -// I am leaving it enabled...eventually userland needs to get the -// message, do an orderly shutdown and use an ioctl or something in -// /proc/powerdowm to actually have us pull the plug. - - *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio - *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed - - return IRQ_HANDLED; -} - -//================================================================================================== -// -//static void do_rb_timeout(unsigned long data) -//{ -// int i; -// -// for (i = 0; i < rb_presses; i++) -// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); -// return; -//} -// -//================================================================================================== -// does nothing -- waiting for userland to define -// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so -// we hang in a loop until the button is no longer pressed - -struct testr { - int ctl; - long param; -}; - -static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) -{ - - static struct testr test[] = { - N2LM_ALL_OFF,0, - N2LM_ON,0, - N2LM_OFF,0, - N2LM_ON,1, - N2LM_ALL_OFF,1, - N2LM_ON,2, - N2LM_OFF,2, - N2LM_ON,3, - N2LM_OFF,3, - N2LM_BLINK,0, - N2LM_OFF,0, - N2LM_BLINK,1, - N2LM_OFF,1, - N2LM_BLINK,2, - N2LM_OFF,2, - N2LM_BLINK,3, - N2LM_OFF,3, - N2LM_ALL_OFF,0, - N2LM_ALT,1, - N2LM_OFF,1, - N2LM_ALL_ON,0 - }; - - printk("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long)); - - wake_up(&n2rb_waitq); - while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) - ; //wait for button release - - if (rb_presses > 20) - rb_presses = 0; - tone = (rb_presses * 50) + 200; - ontime = (rb_presses*10) + 100; - offtime = 500 - (rb_presses*20); - printk("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone); - rb_presses++; - - n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); - n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); -// if (rb_presses == 0) { -// init_jiffy = jiffies; -// init_timer (&n2rb_timer); -// n2rb_timer.function = do_rb_timeout; -// }; -// -// if (rb_presses == 8) -// rb_presses = 0; -// if (rb_presses & 1) -// n2lm_ledon(test[rb_presses]); -// else -// n2lm_ledoff(test[rb_presses]); -// -// n2rb_timer.expires = (jiffies + RB_DELAY); -// add_timer (&n2rb_timer); -// if (rb_presses < 5) { -// if (rb_presses > 0) -// n2lm_ledoff(rb_presses); -// n2lm_ledon(++rb_presses); -// n2lm_timer_start(rb_presses); -// }; - - printk(KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies); - return IRQ_HANDLED; - -} - -//================================================================================================== -// What to do here is majorly undetermined... - -static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -{ - printk(KERN_DEBUG "Reset Button Wait\n"); - interruptible_sleep_on(&n2rb_waitq); - return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; - -} - -//================================================================================================== -// What to do here is majorly undetermined... - -static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -{ - printk(KERN_DEBUG "Power Button Wait\n"); - interruptible_sleep_on(&n2pb_waitq); - return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; - -} - -//-------------------------------------------------------------------------------------------------- - -static struct file_operations n2rb_fops = { - .owner = THIS_MODULE, - .read = n2rb_read, -}; - -//-------------------------------------------------------------------------------------------------- - -static struct file_operations n2pb_fops = { - .owner = THIS_MODULE, - .read = n2pb_read, -}; - -//================================================================================================== - -static void n2iom_initarch(void) -{ - printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); - - *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr - gpio_line_config(N2_RB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_isr_clear(N2_RB_GPIO); - gpio_line_config(N2_PB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_HIGH); - gpio_line_isr_clear(N2_PB_GPIO); - - init_timer(&n2lm_rsg_timer); - init_timer(&n2lm_rsr_timer); - init_timer(&n2lm_d1_timer); - init_timer(&n2lm_d2_timer); -// init_timer(&n2rb_timer); -// init_timer(&n2pb_timer); - init_timer(&n2bz_timer); - n2lm_rsr_timer.function = n2lm_rsr_handler; - n2lm_rsg_timer.function = n2lm_rsg_handler; - n2lm_d2_timer.function = n2lm_d2_handler; - n2lm_d1_timer.function = n2lm_d1_handler; - n2bz_timer.function = n2bz_handler; - n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; - - *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 - *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds - *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; - n2lm_ledon(LED_ALL); - n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_SHORT); - n2lm_ledoff(LED_ALL); -// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit - n2lm_ledon(LED_RS_RED); - - return; -} - -//================================================================================================== - -static int __init n2iom_init(void) -{ - printk(KERN_INFO "OpenN2 Misc I/O Driver Version %s\n", VERSION); - - init_jiffy = jiffies; - printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); - n2iom_initarch(); - - if (register_chrdev(N2RB_MAJOR, "n2_rbm", &n2pb_fops) < NOERR) { - printk(KERN_DEBUG "Reset Button Major %d not available\n", N2RB_MAJOR); - return -EBUSY; - } - if (register_chrdev(N2PB_MAJOR, "n2_pbm", &n2rb_fops) < NOERR) { - printk(KERN_DEBUG "Power Button Major %d not available\n", N2PB_MAJOR); - return -EBUSY; - } - if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { - printk(KERN_DEBUG "Led Manager Major %d not available\n", N2LM_MAJOR); - return -EBUSY; - } - if (register_chrdev(N2BZ_MAJOR, "n2_bzm", &n2bz_fops) < NOERR) { - printk(KERN_DEBUG "Buzzer Major %d not available\n", N2BZ_MAJOR); - return -EBUSY; - } - - if (request_irq(N2RB_IRQ, &n2rb_handler, SA_INTERRUPT, "n2_rb", NULL) < NOERR) { - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", N2RB_IRQ); - return -EIO; - } - if (request_irq(N2PB_IRQ, &n2pb_handler, SA_INTERRUPT, "n2_pb", NULL) < NOERR) { - printk(KERN_DEBUG "Power Button IRQ %d not available\n", N2PB_IRQ); - return -EIO; - } - - enable_irq(N2PB_IRQ); - enable_irq(N2RB_IRQ); - return (NOERR); -} - -//================================================================================================== - -static void __exit n2iom_exit(void) -{ - remove_proc_entry(PWR_OFF_STR, NULL); - del_timer(&n2rb_timer); - free_irq(N2RB_IRQ,NULL); - unregister_chrdev(N2PB_MAJOR, "n2pb"); - del_timer(&n2pb_timer); - free_irq(N2PB_IRQ, NULL); - unregister_chrdev(N2RB_MAJOR, "n2rb" ); - del_timer(&n2lm_rsg_timer); - del_timer(&n2lm_rsr_timer); - del_timer(&n2lm_d1_timer); - del_timer(&n2lm_d2_timer); - unregister_chrdev(N2LM_MAJOR, "n2lm" ); -} - -module_init (n2iom_init); -module_exit (n2iom_exit); - -MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -MODULE_DESCRIPTION("OpenN2 Buttons/LEDs IO Driver"); -MODULE_LICENSE("GPL"); -static int debug = 7; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debugging enabled = 8"); - diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-part.c b/packages/linux/openslug-kernel-2.6.9/nslu2-part.c deleted file mode 100644 index 6fbf952e2a..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2-part.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * nslu2-part.c - * - * Maintainers: http://www.nslu2-linux.org/ - * Initial port: Mark Rakes <mrakes AT mac.com> - * - * "Parse" the fixed partition table of the Linksys NSLU2 and - * produce a Linux partition array to match. - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -/* info we know about the NSLU2's flash setup: - * - * Num Partition offset size - * --- --------- ---------- ----------- - * 0 RedBoot 0x00000000 0x00040000 - * 1 System Configuration 0x00040000 0x00020000 - * 2 Kernel 0x00060000 0x00100000 - * 3 Ramdisk 0x00160000 0x006a0000 - */ - #define NSLU2_NUM_FLASH_PARTITIONS 4 - #define NSLU2_FLASH_PART0_NAME "RedBoot" - #define NSLU2_FLASH_PART0_OFFSET 0x00000000 - #define NSLU2_FLASH_PART0_SIZE 0x00040000 - #define NSLU2_FLASH_PART1_NAME "System Configuration" - #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) - #define NSLU2_FLASH_PART1_SIZE 0x00020000 - #define NSLU2_FLASH_PART2_NAME "Kernel" - #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) - #define NSLU2_FLASH_PART2_SIZE 0x00100000 - #define NSLU2_FLASH_PART3_NAME "Ramdisk" - #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) - #define NSLU2_FLASH_PART3_SIZE 0x006a0000 - -static int parse_nslu2_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long flash_start) -{ - struct mtd_partition *parts; - int ret = 0, namelen = 0; - char *names; - - namelen = strlen(NSLU2_FLASH_PART0_NAME) + - strlen(NSLU2_FLASH_PART1_NAME) + - strlen(NSLU2_FLASH_PART2_NAME) + - strlen(NSLU2_FLASH_PART3_NAME) + - NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ - - parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); - if (!parts) { - ret = -ENOMEM; - goto out; - } - - memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); - names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; - - /* RedBoot partition */ - parts[0].size = NSLU2_FLASH_PART0_SIZE; - parts[0].offset = NSLU2_FLASH_PART0_OFFSET; - parts[0].name = NSLU2_FLASH_PART0_NAME; - parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART0_NAME); - names += strlen(names)+1; - /* System Configuration */ - parts[1].size = NSLU2_FLASH_PART1_SIZE; - parts[1].offset = NSLU2_FLASH_PART1_OFFSET; - parts[1].name = NSLU2_FLASH_PART1_NAME; - parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART1_NAME); - names += strlen(names)+1; - /* Kernel */ - parts[2].size = NSLU2_FLASH_PART2_SIZE; - parts[2].offset = NSLU2_FLASH_PART2_OFFSET; - parts[2].name = NSLU2_FLASH_PART2_NAME; - parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART2_NAME); - names += strlen(names)+1; - /* Ramdisk */ - parts[3].size = NSLU2_FLASH_PART3_SIZE; - parts[3].offset = NSLU2_FLASH_PART3_OFFSET; - parts[3].name = NSLU2_FLASH_PART3_NAME; - parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ - strcpy(names, NSLU2_FLASH_PART3_NAME); - names += strlen(names)+1; - - ret = NSLU2_NUM_FLASH_PARTITIONS; - *pparts = parts; - out: - return ret; -} - -static struct mtd_part_parser nslu2_parser = { - .owner = THIS_MODULE, - .parse_fn = parse_nslu2_partitions, - .name = "NSLU2", -}; - -static int __init nslu2_parser_init(void) -{ - return register_mtd_parser(&nslu2_parser); -} - -static void __exit nslu2_parser_exit(void) -{ - deregister_mtd_parser(&nslu2_parser); -} - -module_init(nslu2_parser_init); -module_exit(nslu2_parser_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mark Rakes"); -MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-pci.c b/packages/linux/openslug-kernel-2.6.9/nslu2-pci.c deleted file mode 100644 index 7327c65a4f..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2-pci.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-pci.c - * - * NSLU2 board-level PCI initialization - * - * based on ixdp425-pci.c: - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -// However, all the common PCI setup code presumes the standard 4 PCI -// interrupts are available. So we compromise...we don't enable the -// IRQ on Pin 8 but we let - -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/delay.h> - -#include <asm/mach/pci.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> - -void __init nslu2_pci_preinit(void) -{ - gpio_line_config(NSLU2_PCI_INTA_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(NSLU2_PCI_INTB_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(NSLU2_PCI_INTC_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); -// gpio_line_config(NSLU2_PCI_INTD_PIN, -// IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - - gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); -// gpio_line_isr_clear(NSLU2_PCI_INTD_PIN); - - ixp4xx_pci_preinit(); -} - -static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { - IRQ_NSLU2_PCI_INTA, - IRQ_NSLU2_PCI_INTB, - IRQ_NSLU2_PCI_INTC, -// IRQ_NSLU2_PCI_INTD - }; - - int irq = -1; - - if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && - pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11 - } - - return irq; -} - -struct hw_pci __initdata nslu2_pci = { - .nr_controllers = 1, - .preinit = nslu2_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, - .map_irq = nslu2_map_irq, -}; - -int __init nslu2_pci_init(void) //monkey see, monkey do -{ - if (machine_is_nslu2()) - pci_common_init(&nslu2_pci); - return 0; -} - -subsys_initcall(nslu2_pci_init); - diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c deleted file mode 100644 index 5698ea9813..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2-setup.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-setup.c - * - * NSLU2 board-setup - * - * based ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Author: Mark Rakes <mrakes at mac.com> - * Maintainers: http://www.nslu2-linux.org/ - * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#ifdef __ARMEB__ -#define REG_OFFSET 3 -#else -#define REG_OFFSET 0 -#endif - -/* - * NSLU2 uses only one serial port - */ -static struct uart_port nslu2_serial_ports[] = { - { - .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART1_BASE_PHYS), - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 32 - } -#if 0 - , { - .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART2_BASE_PHYS), - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 1, - .type = PORT_XSCALE, - .fifosize = 32 - } -#endif -}; - -void __init nslu2_map_io(void) -{ - early_serial_setup(&nslu2_serial_ports[0]); -#if 0 - early_serial_setup(&nslu2_serial_ports[1]); -#endif - ixp4xx_map_io(); -} - -static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nslu2_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &nslu2_flash_data, - }, - .num_resources = 1, - .resource = &nslu2_flash_resource, -}; - -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { - .sda_pin = NSLU2_SDA_PIN, - .scl_pin = NSLU2_SCL_PIN, -}; - -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", - .id = 0, - .dev = { - .platform_data = &nslu2_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash -}; - -static void __init nslu2_init(void) -{ - platform_add_devices(&nslu2_devices, ARRAY_SIZE(nslu2_devices)); -} - -MACHINE_START(NSLU2, "Linksys NSLU2") - MAINTAINER("www.nslu2-linux.org") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(nslu2_map_io) - INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here - INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? - BOOT_PARAMS(0x0100) - INIT_MACHINE(nslu2_init) -MACHINE_END diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2.h b/packages/linux/openslug-kernel-2.6.9/nslu2.h deleted file mode 100644 index bb79aaa007..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nslu2.h - * - * NSLU2 platform specific definitions - * - * Author: Mark Rakes <mrakes AT mac.com> - * Maintainers: http://www.nslu2-linux.org - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -// GPIO 8 is used as the power input so is not free for use as a PCI IRQ -// kas11 11-2-04 - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <asm/hardware.h>" -#endif - -#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* - * NSLU2 PCI IRQs - */ -#define NSLU2_PCI_MAX_DEV 3 -#define NSLU2_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NSLU2_PCI_INTA_PIN 11 -#define NSLU2_PCI_INTB_PIN 10 -#define NSLU2_PCI_INTC_PIN 9 -//#define NSLU2_PCI_INTD_PIN 8 - - diff --git a/packages/linux/openslug-kernel-2.6.9/nslu2_2.6.9.patch b/packages/linux/openslug-kernel-2.6.9/nslu2_2.6.9.patch deleted file mode 100644 index 9f569baabf..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/nslu2_2.6.9.patch +++ /dev/null @@ -1,312 +0,0 @@ -diff -purN linux-2.6.9/arch/arm/mach-ixp4xx/Kconfig linux-2.6.9-new/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.9/arch/arm/mach-ixp4xx/Kconfig 2004-06-15 22:19:01.000000000 -0700 -+++ linux-2.6.9-new/arch/arm/mach-ixp4xx/Kconfig 2004-09-14 03:59:28.000000000 -0700 -@@ -29,6 +29,13 @@ config ARCH_IXDP425 - IXDP425 Development Platform (Also known as Richfield). - For more information on this platform, see Documentation/arm/IXP4xx. - -+config ARCH_NSLU2 -+ bool "NSLU2" -+ help -+ Say 'Y' here if you want your kernel to support Linksys's -+ NSLU2 NAS device. For more information on this platform, -+ see http://www.nslu2-linux.org -+ - # - # IXCDP1100 is the exact same HW as IXDP425, but with a different machine - # number from the bootloader due to marketing monkeys, so we just enable it ---- linux-2.6.9.orig/arch/arm/mach-ixp4xx/Makefile 2004-06-16 01:18:59.000000000 -0400 -+++ linux-2.6.9/arch/arm/mach-ixp4xx/Makefile 2004-09-24 01:35:22.051627330 -0400 -@@ -4,7 +4,6 @@ - - obj-y += common.o common-pci.o - --obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o - obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o - obj-$(CONFIG_ARCH_PRPMC1100) += prpmc1100-pci.o prpmc1100-setup.o -- -+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o -diff -purN linux-2.6.9/drivers/mtd/maps/ixp4xx.c linux-2.6.9-new/drivers/mtd/maps/ixp4xx.c ---- linux-2.6.9/drivers/mtd/maps/ixp4xx.c 2004-06-15 22:18:38.000000000 -0700 -+++ linux-2.6.9-new/drivers/mtd/maps/ixp4xx.c 2004-09-14 03:59:28.000000000 -0700 -@@ -82,7 +82,11 @@ struct ixp4xx_flash_info { - struct resource *res; - }; - -+#ifdef CONFIG_ARCH_NSLU2 -+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; -+#else - static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -+#endif - - static int - ixp4xx_flash_remove(struct device *_dev) -diff -purN linux-2.6.9/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.9-new/include/asm-arm/arch-ixp4xx/hardware.h ---- linux-2.6.9/include/asm-arm/arch-ixp4xx/hardware.h 2004-06-15 22:19:02.000000000 -0700 -+++ linux-2.6.9-new/include/asm-arm/arch-ixp4xx/hardware.h 2004-09-14 03:59:28.000000000 -0700 -@@ -37,5 +37,6 @@ - #include "ixdp425.h" - #include "coyote.h" - #include "prpmc1100.h" -+#include "nslu2.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ -diff -purN linux-2.6.9/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.9-new/include/asm-arm/arch-ixp4xx/irqs.h ---- linux-2.6.9/include/asm-arm/arch-ixp4xx/irqs.h 2004-06-15 22:19:37.000000000 -0700 -+++ linux-2.6.9-new/include/asm-arm/arch-ixp4xx/irqs.h 2004-09-14 03:59:28.000000000 -0700 -@@ -75,4 +75,12 @@ - #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 - #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -+/* -+ * NSLU2 board IRQs -+ */ -+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 -+ -+ - #endif -diff -Nru linux-2.6.9/arch/arm/mach-ixp4xx/common-pci.c linux-2.6.9/arch/arm/mach-ixp4xx/common-pci.c ---- linux-2.6.9/arch/arm/mach-ixp4xx/common-pci.c 2004-10-08 13:59:23 -07:00 -+++ linux-2.6.9/arch/arm/mach-ixp4xx/common-pci.c 2004-10-08 13:59:23 -07:00 -@@ -239,9 +239,10 @@ - return 0xffffffff; - } - --static int read_config(u8 bus_num, u16 devfn, int where, int size, u32 *value) -+static int ixp4xx_pci_read_config(struct pci_bus *bus, u16 devfn, int where, int size, u32 *value) - { - u32 n, byte_enables, addr, data; -+ u8 bus_num = bus->number; - - pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size, - bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); -@@ -261,9 +262,10 @@ - return PCIBIOS_SUCCESSFUL; - } - --static int write_config(u8 bus_num, u16 devfn, int where, int size, u32 value) -+static int ixp4xx_pci_write_config(struct pci_bus *bus, u16 devfn, int where, int size, u32 value) - { - u32 n, byte_enables, addr, data; -+ u8 bus_num = bus->number; - - pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where, - size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); -@@ -281,30 +283,10 @@ - return PCIBIOS_SUCCESSFUL; - } - --/* -- * Generalized PCI config access functions. -- */ --static int ixp4xx_read_config(struct pci_bus *bus, unsigned int devfn, -- int where, int size, u32 *value) --{ -- if (bus->number && !PCI_SLOT(devfn)) -- return local_read_config(where, size, value); -- return read_config(bus->number, devfn, where, size, value); --} -- --static int ixp4xx_write_config(struct pci_bus *bus, unsigned int devfn, -- int where, int size, u32 value) --{ -- if (bus->number && !PCI_SLOT(devfn)) -- return local_write_config(where, size, value); -- return write_config(bus->number, devfn, where, size, value); --} -- - struct pci_ops ixp4xx_ops = { -- .read = ixp4xx_read_config, -- .write = ixp4xx_write_config, -+ .read = ixp4xx_pci_read_config, -+ .write = ixp4xx_pci_write_config, - }; -- - - /* - * PCI abort handler -diff -Nru linux-2.6.9/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.9/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h ---- linux-2.6.9/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2004-10-08 13:59:23 -07:00 -+++ linux-2.6.9/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2004-10-08 13:59:23 -07:00 -@@ -55,7 +55,7 @@ - * PCI Config registers - */ - #define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) --#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFD000) -+#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFE000) - #define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - - /* ---- linux-2.6.9/drivers/i2c/chips/Kconfig.orig 2004-06-16 01:19:35.000000000 -0400 -+++ linux-2.6.9/drivers/i2c/chips/Kconfig 2004-09-22 18:09:48.454794342 -0400 -@@ -240,6 +240,16 @@ - This driver can also be built as a module. If so, the module - will be called pcf8591. - -+config SENSORS_X1205 -+ tristate "Xicor X1205 RTC chip" -+ depends on I2C && EXPERIMENTAL -+ select I2C_SENSOR -+ help -+ If you say yes here you get support for the Xicor x1205 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called x1205-rtc -+ - config SENSORS_RTC8564 - tristate "Epson 8564 RTC chip" - depends on I2C && EXPERIMENTA ---- linux-2.6.9/drivers/i2c/chips/Makefile.old 2004-06-16 01:20:26.000000000 -0400 -+++ linux-2.6.9/drivers/i2c/chips/Makefile 2004-09-22 16:48:06.435580334 -0400 -@@ -25,6 +25,7 @@ - obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o - obj-$(CONFIG_SENSORS_VIA686A) += via686a.o - obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o -+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - ---- linux-2.6.9/arch/arm/mach-ixp4xx/common.c.orig 2004-10-18 17:54:25.000000000 -0400 -+++ linux-2.6.9/arch/arm/mach-ixp4xx/common.c 2004-10-21 14:22:40.766271419 -0400 -@@ -227,10 +227,10 @@ - /* - * Catch up with the real idea of time - */ -- do { -+ while((*IXP4XX_OSTS - last_jiffy_time) > LATCH) { - timer_tick(regs); - last_jiffy_time += LATCH; -- } while((*IXP4XX_OSTS - last_jiffy_time) > LATCH); -+ }; - - return IRQ_HANDLED; - } ---- linux-2.6.9/include/linux/i2c-id.h.orig 2004-10-18 17:53:10.000000000 -0400 -+++ linux-2.6.9/include/linux/i2c-id.h 2004-10-21 14:14:17.115262597 -0400 -@@ -109,7 +109,7 @@ - #define I2C_DRIVERID_OVCAMCHIP 61 /* OmniVision CMOS image sens. */ - #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */ - #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ -- -+#define I2C_DRIVERID_X1205 0xF0 - - #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ - #define I2C_DRIVERID_EXP1 0xF1 -diff -Nru a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S ---- a/arch/arm/kernel/entry-header.S 2004-10-08 13:59:23 -07:00 -+++ b/arch/arm/kernel/entry-header.S 2004-10-08 13:59:23 -07:00 -@@ -4,8 +4,9 @@ - #include <asm/assembler.h> - #include <asm/constants.h> - #include <asm/errno.h> - #include <asm/hardware.h> - #include <asm/arch/irqs.h> -+#include <asm/arch/entry-macro.S> - - #ifndef MODE_SVC - #define MODE_SVC 0x13 -diff -Nru a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S ---- /dev/null Wed Dec 31 16:00:00 1969 -+++ b/include/asm-arm/arch-ixp4xx/entry-macro.S Thu Sep 16 13:15:46 2004 -@@ -0,0 +1,25 @@ -+/* -+ * include/asm-arm/arch-ixp4xx/entry-macro.S -+ * -+ * Low-level IRQ helper macros for IXP4xx-based platforms -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+ .macro disable_fiq -+ .endm -+ -+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -+ -+ ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) -+ ldr \irqstat, [\irqstat] @ get interrupts -+ cmp \irqstat, #0 -+ beq 1001f -+ clz \irqnr, \irqstat -+ mov \base, #31 -+ subs \irqnr, \base, \irqnr -+ -+1001: -+ .endm - -diff -purN linux-2.6.9.orig/arch/arm/boot/compressed/head.S linux-2.6.9/arch/arm/boot/compressed/head.S ---- linux-2.6.9.orig/arch/arm/boot/compressed/head.S 2004-10-18 17:55:07.000000000 -0400 -+++ linux-2.6.9/arch/arm/boot/compressed/head.S 2004-10-31 03:05:25.011878371 -0500 -@@ -79,6 +79,7 @@ - .endm - .macro writeb, rb - str \rb, [r3, #0] -+ .endm - #elif defined(CONFIG_ARCH_IXP2000) - .macro loadsp, rb - mov \rb, #0xc0000000 -diff -purN linux-2.6.9.orig/arch/arm/boot/compressed/head-xscale.S linux-2.6.9/arch/arm/boot/compressed/head-xscale.S ---- linux-2.6.9.orig/arch/arm/boot/compressed/head-xscale.S 2004-10-18 17:53:45.000000000 -0400 -+++ linux-2.6.9/arch/arm/boot/compressed/head-xscale.S 2004-10-31 03:05:25.013878040 -0500 -@@ -56,3 +56,7 @@ __XScale_start: - mov r7, #MACH_TYPE_COTULLA_IDP - #endif - -+#ifdef CONFIG_ARCH_NSLU2 -+ mov r7, #(MACH_TYPE_NSLU2 & 0xff) -+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) -+#endif ---- linux-2.6.9.orig/arch/arm/tools/mach-types 2004-10-18 17:54:08.000000000 -0400 -+++ linux-2.6.9/arch/arm/tools/mach-types 2004-10-31 03:05:25.006879199 -0500 -@@ -6,7 +6,7 @@ - # To add an entry into this database, please see Documentation/arm/README, - # or contact rmk@arm.linux.org.uk - # --# Last update: Thu Sep 30 15:23:21 2004 -+# Last update: Mon Oct 25 04:14:24 2004 - # - # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number - # -@@ -595,8 +595,8 @@ pxa_dnp2110 MACH_PXA_DNP2110 PXA_DNP211 - xaeniax MACH_XAENIAX XAENIAX 585 - somn4250 MACH_SOMN4250 SOMN4250 586 - pleb2 MACH_PLEB2 PLEB2 587 --cwl MACH_CWL CWL 588 --gd MACH_GD GD 589 -+cornwallis MACH_CORNWALLIS CORNWALLIS 588 -+gurney_drv MACH_GURNEY_DRV GURNEY_DRV 589 - chaffee MACH_CHAFFEE CHAFFEE 590 - rms101 MACH_RMS101 RMS101 591 - rx3715 MACH_RX3715 RX3715 592 -@@ -604,7 +604,7 @@ swift MACH_SWIFT SWIFT 593 - roverp7 MACH_ROVERP7 ROVERP7 594 - pr818s MACH_PR818S PR818S 595 - trxpro MACH_TRXPRO TRXPRO 596 --nslu2 MACH_NSLU2 NSLU2 597 -+nslu2 ARCH_NSLU2 NSLU2 597 - e400 MACH_E400 E400 598 - trab MACH_TRAB TRAB 599 - cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 -@@ -615,3 +615,18 @@ ixdpg425 MACH_IXDPG425 IXDPG425 604 - tomtomgo MACH_TOMTOMGO TOMTOMGO 605 - versatile_ab MACH_VERSATILE_AB VERSATILE_AB 606 - edb9307 MACH_EDB9307 EDB9307 607 -+sg565 MACH_SG565 SG565 608 -+lpd79524 MACH_LPD79524 LPD79524 609 -+lpd79525 MACH_LPD79525 LPD79525 610 -+rms100 MACH_RMS100 RMS100 611 -+kb9200 MACH_KB9200 KB9200 612 -+sx1 MACH_SX1 SX1 613 -+hms39c7092 MACH_HMS39C7092 HMS39C7092 614 -+armadillo MACH_ARMADILLO ARMADILLO 615 -+ipcu MACH_IPCU IPCU 616 -+loox720 MACH_LOOX720 LOOX720 617 -+ixdp465 MACH_IXDP465 IXDP465 618 -+ixdp2351 MACH_IXDP2351 IXDP2351 619 -+adsvix MACH_ADSVIX ADSVIX 620 -+dm270 MACH_DM270 DM270 621 -+ diff --git a/packages/linux/openslug-kernel-2.6.9/usbnet.patch b/packages/linux/openslug-kernel-2.6.9/usbnet.patch deleted file mode 100644 index a89c392f47..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/usbnet.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- linux-2.6.9/drivers/usb/net/usbnet_orig.c 2005-02-11 19:14:59.455525200 -0500 -+++ linux-2.6.9/drivers/usb/net/usbnet.c 2005-02-11 19:17:29.751676712 -0500 -@@ -2374,12 +2374,13 @@ - #endif - size = (sizeof (struct ethhdr) + dev->net->mtu); - -- if ((skb = alloc_skb (size, flags)) == 0) { -+ if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) { - devdbg (dev, "no rx skb"); - defer_kevent (dev, EVENT_RX_MEMORY); - usb_free_urb (urb); - return; - } -+ skb_reserve (skb, NET_IP_ALIGN); - - entry = (struct skb_data *) skb->cb; - entry->urb = urb; diff --git a/packages/linux/openslug-kernel-2.6.9/x1205-rtc.c b/packages/linux/openslug-kernel-2.6.9/x1205-rtc.c deleted file mode 100644 index 50fbc9e280..0000000000 --- a/packages/linux/openslug-kernel-2.6.9/x1205-rtc.c +++ /dev/null @@ -1,548 +0,0 @@ -/* - x1205 - an 12c driver for the Xicor X1205 RTC - Copyright 2004 Karen Spearel - - please send all reports to: - kas11 at tampabay dot rr dot com - - based on linux/drivers/acron/char/pcf8583.h - Copyright (C) 2000 Russell King - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - - * i2c_adapter is the structure used to identify a physical i2c bus along - * with the access algorithms necessary to access it. - -struct i2c_adapter { - struct module *owner; - unsigned int id; == is algo->id | hwdep.struct->id, for registered values see below - unsigned int class; - struct i2c_algorithm *algo; the algorithm to access the bus - void *algo_data; - - --- administration stuff. - int (*client_register)(struct i2c_client *); - int (*client_unregister)(struct i2c_client *); - - data fields that are valid for all devices - struct semaphore bus_lock; - struct semaphore clist_lock; - - int timeout; - int retries; - struct device dev; the adapter device - struct class_device class_dev; the class device - -#ifdef CONFIG_PROC_FS - No need to set this when you initialize the adapter - int inode; -#endif def CONFIG_PROC_FS - - int nr; - struct list_head clients; - struct list_head list; - char name[I2C_NAME_SIZE]; - struct completion dev_released; - struct completion class_dev_released; -}; -*/ - - -/*========== Driver for the X1205 on the Linksys NSLU2 ==================*/ - -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/bcd.h> -#include <linux/rtc.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/miscdevice.h> -#include <linux/device.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <linux/moduleparam.h> - -#define RTC_GETDATETIME 0 -#define RTC_SETTIME 1 -#define RTC_SETDATETIME 2 - -#define I2C_M_WR 0 // just for consistancy - -// offsets into read buf - add 2 for write buf -#define CCR_SEC 0 -#define CCR_MIN 1 -#define CCR_HOUR 2 -#define CCR_MDAY 3 -#define CCR_MONTH 4 -#define CCR_YEAR 5 -#define CCR_WDAY 6 -#define CCR_Y2K 7 - -#define X1205_I2C_BUS_ADDR 0x6f // hardwired into x1205 -#define X1205_ALM0_BASE 0x00 // Base address of the ALM0 -#define X1205_CCR_BASE 0x30 // Base address of the CCR -#define X1205_SR_ADDR 0x3f // Status Register -#define X1205_SR_WEL 0x02 // Write Enable Latch bit -#define X1205_SR_RWEL 0x04 // Register Write Enable Bit -#define X1205_MILBIT 0x80 // this bit set in ccr.hour for 24 hr mode -#define NOERR 0 -#define RTC_NODATE 0 -#define RTC_DATETOO 1 - -// comment out next line is your x1205 can't do page writes -//#define X1205PAGEWRITE 1 -#ifdef X1205PAGEWRITE -#define DRIVERNAME "Xicor x1205 RTC Driver v0.9.3.3" -#else -#define DRIVERNAME "Xicor x1205 RTC Dvr v0.9.3.3NPW" -#endif - -#define DEBUG KERN_DEBUG - - -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base); -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base); -static int x1205_attach(struct i2c_adapter *adapter); -static int x1205_detach(struct i2c_client *client); -static int x1205_validate_tm(struct rtc_time *tm); -static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); -static int x1205_sync_rtc(void); -static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr); -static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); -static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data); - -static struct i2c_driver x1205_driver = { - .owner = THIS_MODULE, - .name = DRIVERNAME, - .id = I2C_DRIVERID_X1205, - .flags = I2C_DF_NOTIFY, - .attach_adapter = &x1205_attach, //we don't need to probe...x1205 is hardwired @ 0x6f - .detach_client = &x1205_detach, - .command = &x1205_command, //this prolly never gets called...used internally tho -}; - -static struct i2c_client x1205_i2c_client = { - .id = I2C_DRIVERID_X1205, - .flags = 0, - .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit - .adapter = NULL, // the adapter we sit on assigned in attach - .driver = &x1205_driver, // and our access routines - .usage_count = 0, // How many accesses currently to this client - .dev = {}, // the device structure - .list = {}, - .name = DRIVERNAME, - .released = {}, -}; - -static struct file_operations rtc_fops = { - owner: THIS_MODULE, - ioctl: x1205_ioctl, - read: x1205_read, -}; - -static struct miscdevice x1205_miscdev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops, -}; -extern int (*set_rtc)(void); -static unsigned epoch = 1900; //coresponds to year 0 -static unsigned rtc_epoch = 2000; -static const unsigned char days_in_mo[] = -{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -//===================================CODE====================================== -// in the routines that deal directly with the x1205 hardware, we use -// rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch -// Epoch is inited as 2000. Time is set to UT -//============================================================================= -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base) -{ - static unsigned char addr[2] = { 0,} ; - unsigned char buf[8]; - struct i2c_msg msgs[2] = { - { client->addr, I2C_M_WR, 2, addr }, //msg 1 = send base address - { client->addr, I2C_M_RD, 8, buf }, //msg 2 = read sequential data - }; - addr[1] = reg_base; - if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { //did we read 2 messages? - printk(KERN_DEBUG "raw x1205 read data - sec-%02x min-%02x hr-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", - buf[0],buf[1],buf[2],buf[3],buf[4],buf[5],buf[6], buf[7]); - tm->tm_sec = BCD2BIN(buf[CCR_SEC]); - tm->tm_min = BCD2BIN(buf[CCR_MIN]); - buf[CCR_HOUR] &= ~X1205_MILBIT; - tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); //hr is 0-23 - tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); - tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); - rtc_epoch = BCD2BIN(buf[CCR_Y2K]) * 100; - tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + rtc_epoch - epoch; - tm->tm_wday = buf[CCR_WDAY]; - printk(KERN_DEBUG "rtc_time output data - sec-%02d min-%02d hr-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday,epoch, rtc_epoch); - } else { - printk(KERN_DEBUG "i2c_transfer Read Error\n"); - return -EIO; - } - - return NOERR; -} -// x1205pagewrite allows writing a block of registers in msg3 even though the x1205 says -// nothing about this in its spec. -// it needs more testing as it is possible some x1205s are actually not-completely- -// functional x1226s and there is a reason for the multiple write to not be in the spec. -// anyhow, it is enabled for the time being...and we even push out luck by sending 10 bytes - -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base) -{ - static unsigned char wel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL }; - static unsigned char rwel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL | X1205_SR_RWEL }; - static unsigned char diswe[3] = { 0, X1205_SR_ADDR, 0 }; - -#ifdef X1205PAGEWRITE - - static unsigned char buf[10] = { 0, X1205_CCR_BASE, }; - struct i2c_msg msgs[4] = { - { client->addr, I2C_M_WR, 3, wel }, //msg 1 = write WEL to to ccr sr - { client->addr, I2C_M_WR, 3, rwel }, //msg 2 = write RWEL to ccr sr - { client->addr, I2C_M_WR, 10, buf }, //msg 3 = write ccr base addr +seq data - { client->addr, I2C_M_WR, 3, diswe }, //msg 4 = 0 to ccr sr to disable writes - }; - - msgs[2].len = 5; // 5 bytes + addr to set time only - buf [1] = reg_base; - buf[CCR_SEC+2] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN+2] = BIN2BCD(tm->tm_min); - buf[CCR_HOUR+2] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format - if (datetoo == 1) { - buf[CCR_MDAY+2] = BIN2BCD(tm->tm_mday); - buf[CCR_MONTH+2] = BIN2BCD(tm->tm_mon); // input is 0-11 - buf[CCR_YEAR+2] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 - buf[CCR_WDAY+2] = tm->tm_wday & 7; - buf[CCR_Y2K+2] = BIN2BCD((rtc_epoch/100)); - msgs[2].len += 5; //5 more bytes to set date - } - printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); - printk(KERN_DEBUG "BCD write data - sec-%02x min-%02x hour-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", - buf[2],buf[3],buf[4],buf[5],buf[6], buf[7], buf[8], buf[9]); - - if ((i2c_transfer(client->adapter, msgs, 4)) != 4) - return -EIO; - return NOERR; - -#else //do this if page writes aren't working - - int i,xfer; - static unsigned char data[3] = { 0,}; - static unsigned char buf[8]; - - buf[CCR_SEC] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN] = BIN2BCD(tm->tm_min); - buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format - if (datetoo == 1) { - buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); - buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); // input is 0-11 - buf[CCR_YEAR] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 - buf[CCR_WDAY] = tm->tm_wday & 7; - buf[CCR_Y2K] = BIN2BCD((rtc_epoch/100)); - } - printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", - tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); - - xfer = i2c_master_send(client, wel, 3); - printk(KERN_DEBUG "wen - %x\n", xfer); - if (xfer != 3) - return -EIO; - - xfer = i2c_master_send(client, rwel, 3); - printk(KERN_DEBUG "wenb - %x\n", xfer); - if (xfer != 3) - return -EIO; - - for (i = 0; i < 8; i++) { - data[1] = i + reg_base; - data[2] = buf[i]; - xfer = i2c_master_send(client, data, 3); - printk(KERN_DEBUG "xfer - %d addr - %02x data - %02x\n", xfer, data[1], data[2]); - if (xfer != 3) - return -EIO; - }; - - xfer = i2c_master_send(client, diswe, 3); - printk(KERN_DEBUG "wdis - %x\n", xfer); - if (xfer != 3) - return -EIO; - return NOERR; -#endif -} -//============================================================================= - -static int x1205_attach(struct i2c_adapter *adapter) -{ - struct rtc_time tm; - struct timespec tv; - int errno; - - x1205_i2c_client.adapter = adapter; - x1205_i2c_client.id++; - - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver - return -EIO; - - if ((errno = i2c_attach_client(&x1205_i2c_client)) != NOERR) - return errno; - - tv.tv_nsec = tm.tm_sec * 10000000; - tv.tv_sec = mktime(tm.tm_year+epoch, tm.tm_mon, tm.tm_mday, tm.tm_hour, - tm.tm_min, tm.tm_sec); - do_settimeofday(&tv); - set_rtc = x1205_sync_rtc; - - printk(KERN_DEBUG "%s attached on adapter %s\n",x1205_i2c_client.name, - x1205_i2c_client.adapter->name); //why is this name a null string? - - return NOERR; -} - -static int x1205_detach(struct i2c_client *client) -{ - int errno; - - if ((errno = i2c_detach_client(client)) != 0) { - printk(KERN_DEBUG "i2c_detach failed - errno = %d\n", errno); - return errno; - } - - return NOERR; -} - -// make sure the rtc_time values are in bounds -static int x1205_validate_tm(struct rtc_time *tm) -{ - tm->tm_year += 1900; - - if (tm->tm_year < 1970) - return -EINVAL; - - if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) - return -EINVAL; - - if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && - ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) - return -EINVAL; - - if ((tm->tm_year -= epoch) > 255) - return -EINVAL; - - if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) - return -EINVAL; - return NOERR; -} - -static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) -{ - int errno, dodate = RTC_DATETOO; - - if (client == NULL || tm == NULL) - return -EINVAL; - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - printk(KERN_DEBUG "x1205_command %d\n", cmd); - - switch (cmd) { - case RTC_GETDATETIME: - return x1205_get_datetime(client, tm, X1205_CCR_BASE); - - case RTC_SETTIME: // note fall thru - dodate = RTC_NODATE; - case RTC_SETDATETIME: - if ((errno = x1205_validate_tm(tm)) < NOERR) - return errno; - return x1205_set_datetime(client, tm, dodate, X1205_CCR_BASE); - - default: - return -EINVAL; - } -} - -static int x1205_sync_rtc(void) -{ - struct rtc_time new_tm, old_tm; - unsigned long cur_secs = xtime.tv_sec; - - printk(KERN_DEBUG "x1205_sync_rtc entry\n"); - - if (x1205_command(&x1205_i2c_client, RTC_GETDATETIME, &old_tm)) - return 0; - -// xtime.tv_nsec = old_tm.tm_sec * 10000000; //FIXME: - new_tm.tm_sec = cur_secs % 60; - cur_secs /= 60; - new_tm.tm_min = cur_secs % 60; - cur_secs /= 60; - new_tm.tm_hour = cur_secs % 24; - - /* - * avoid writing when we're going to change the day - * of the month. We will retry in the next minute. - * This basically means that if the RTC must not drift - * by more than 1 minute in 11 minutes. - */ - if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || - (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) - return 1; - printk(KERN_DEBUG "x1205_sync_rtc exit\n"); - - return x1205_command(&x1205_i2c_client, RTC_SETTIME, &new_tm); -} - -static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr) -{ - struct rtc_time tm; - - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return -EIO; - return copy_to_user(buf, &tm, sizeof(tm)) ? -EFAULT : NOERR; -} - -//============================================================================== - -static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_time tm; - int errno; - - printk(KERN_DEBUG "ioctl = %x\n", cmd); - - switch (cmd) { - case RTC_RD_TIME: - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return -EIO; - break; - - case RTC_SET_TIME: - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - if ((errno = x1205_validate_tm(&tm)) < NOERR) - return errno; - return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_CCR_BASE); - - case RTC_ALM_SET: //FIXME: set Control Regs - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) - return -EFAULT; - return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_ALM0_BASE); - - case RTC_ALM_READ: - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_ALM0_BASE)) < NOERR) - return -EIO; - break; - - case RTC_EPOCH_READ: - - return put_user (epoch, (unsigned long __user *)arg); - - case RTC_EPOCH_SET: - if (arg < 1900) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - epoch = arg; - return 0; - - default: - return -ENOTTY; - } - return copy_to_user((void __user *)arg, &tm, sizeof tm) ? -EFAULT : 0; - -} - -static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) -{ - struct rtc_time tm; - int slen, errno; - - if ((errno = x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) - return errno; - -// here we return the real year and the month as 1-12 since it is human-readable - slen = sprintf(buf, "rtc_time\t: %02d:%02d:%02d\nrtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year + 1900, tm.tm_mon+1, tm.tm_mday); - printk(KERN_DEBUG "raw rtc_time\t: %02d:%02d:%02d\nraw rtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon, tm.tm_mday); - - if (slen <= off + len) - *eof = 1; - *start = buf + off; - slen -= off; - if (slen > len) - slen = len; - if ( slen < 0 ) - slen = 0; - - return slen; -} - -static int __init x1205_init(void) -{ - struct rtc_time tm; - int errno; - printk(KERN_INFO "LOADED %s\n", DRIVERNAME); - - if ((errno = i2c_add_driver(&x1205_driver)) != NOERR) { - dev_dbg(x1205_i2c_client.dev, "x1205_init failed - errno = %d\n", errno); - return (errno); - } - if ((errno = misc_register(&x1205_miscdev)) != NOERR) { - dev_dbg(x1205_i2c_client.dev, "Register Misc Driver failed - errno = %d\n", errno); - i2c_del_driver(&x1205_driver); - return errno; - } - if (create_proc_read_entry("driver/rtc", 0, NULL, x1205_read_proc, NULL) < NOERR) - return -ENOMEM; - if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functionality - return -EIO; - - return NOERR; -} - -static void __exit x1205_exit(void) -{ - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&x1205_miscdev); - i2c_del_driver(&x1205_driver); - set_rtc = NULL; -} - -MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); -MODULE_DESCRIPTION("Xicor X1205-RTC Driver"); -MODULE_LICENSE("GPL"); -static int debug = 7; -module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging enabled = 1"); - -module_init(x1205_init); -module_exit(x1205_exit); diff --git a/packages/linux/openslug-kernel_2.6.11.2.bb b/packages/linux/openslug-kernel_2.6.11.2.bb deleted file mode 100644 index 8e2555d014..0000000000 --- a/packages/linux/openslug-kernel_2.6.11.2.bb +++ /dev/null @@ -1,64 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux kernel for the Linksys NSLU2 device" -LICENSE = "GPL" -MAINTAINER = "Chris Larson <kergoth@handhelds.org>" -PR = "r15" - -KERNEL_SUFFIX = "openslug" - -SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.11.2.tar.bz2 \ - file://nslu2_2.6.11.patch;patch=1 \ - file://usbnet.patch;patch=1 \ - file://ixp4xx_copy_from.patch;patch=1 \ - file://anonymiser.patch;patch=1 \ - file://xscale-reset.patch;patch=1 \ - file://mtd-shutdown.patch;patch=1 \ - file://defconfig \ - file://x1205-rtc.c \ - file://nslu2-io.c \ - file://nslu2-setup.c \ - file://nslu2-pci.c \ - file://nslu2-part.c \ - file://nslu2.h" -S = "${WORKDIR}/linux-2.6.11.2" - -COMPATIBLE_HOST = 'arm.*-linux' - -inherit kernel - -ARCH = "arm" -KERNEL_IMAGETYPE = "zImage" -CMDLINE_CONSOLE ?= "ttyS0,115200n8" -CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc reboot=s" -#CMDLINE_ROOT ?= "root=/dev/ram0 rw rootfstype=ext2,jffs2 initrd=0x01000000,10M init=/linuxrc mem=32M@0x00000000" -CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config - install -m 0644 ${WORKDIR}/x1205-rtc.c ${S}/drivers/i2c/chips/x1205-rtc.c - install -m 0644 ${WORKDIR}/nslu2-io.c ${S}/arch/arm/mach-ixp4xx/nslu2-io.c - install -m 0644 ${WORKDIR}/nslu2-setup.c ${S}/arch/arm/mach-ixp4xx/nslu2-setup.c - install -m 0644 ${WORKDIR}/nslu2-pci.c ${S}/arch/arm/mach-ixp4xx/nslu2-pci.c - install -m 0644 ${WORKDIR}/nslu2-part.c ${S}/arch/arm/mach-ixp4xx/nslu2-part.c - install -m 0644 ${WORKDIR}/nslu2.h ${S}/include/asm-arm/arch-ixp4xx/nslu2.h - echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config - rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \ - ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch -} - -do_deploy() { - install -d ${DEPLOY_DIR}/images - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${KERNEL_SUFFIX} -} - -do_deploy[dirs] = "${S}" - -addtask deploy before do_build after do_compile - -python () { - # Don't build openslug kernel unless we're targeting an nslu2 - mach = bb.data.getVar("MACHINE", d, 1) - dist = bb.data.getVar("DISTRO", d, 1) - if mach != 'nslu2' or dist != 'openslug': - raise bb.parse.SkipPackage("OpenSlug only builds for the Linksys NSLU2") -} diff --git a/packages/linux/openslug-kernel_2.6.11.bb b/packages/linux/openslug-kernel_2.6.11.bb deleted file mode 100644 index 2b12023fd5..0000000000 --- a/packages/linux/openslug-kernel_2.6.11.bb +++ /dev/null @@ -1,61 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux kernel for the Linksys NSLU2 device" -LICENSE = "GPL" -MAINTAINER = "Chris Larson <kergoth@handhelds.org>" -PR = "r7" - -KERNEL_SUFFIX = "openslug" - -SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.11.2.tar.bz2 \ - file://nslu2_2.6.11.patch;patch=1 \ - file://usbnet.patch;patch=1 \ - file://ixp4xx_copy_from.patch;patch=1 \ - file://defconfig \ - file://x1205-rtc.c \ - file://nslu2-io.c \ - file://nslu2-setup.c \ - file://nslu2-pci.c \ - file://nslu2-part.c \ - file://nslu2.h" -S = "${WORKDIR}/linux-2.6.11.2" - -COMPATIBLE_HOST = 'arm.*-linux' - -inherit kernel - -ARCH = "arm" -KERNEL_IMAGETYPE = "zImage" -CMDLINE_CONSOLE ?= "ttyS0,115200n8" -#CMDLINE_ROOT ?= "root=/dev/mtdblock4 rootfstype=jffs2 mem=32M@0x00000000" -CMDLINE_ROOT ?= "root=/dev/ram0 rw rootfstype=ext2,jffs2 initrd=0x01000000,10M init=/linuxrc mem=32M@0x00000000" -CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config - install -m 0644 ${WORKDIR}/x1205-rtc.c ${S}/drivers/i2c/chips/x1205-rtc.c - install -m 0644 ${WORKDIR}/nslu2-io.c ${S}/arch/arm/mach-ixp4xx/nslu2-io.c - install -m 0644 ${WORKDIR}/nslu2-setup.c ${S}/arch/arm/mach-ixp4xx/nslu2-setup.c - install -m 0644 ${WORKDIR}/nslu2-pci.c ${S}/arch/arm/mach-ixp4xx/nslu2-pci.c - install -m 0644 ${WORKDIR}/nslu2-part.c ${S}/arch/arm/mach-ixp4xx/nslu2-part.c - install -m 0644 ${WORKDIR}/nslu2.h ${S}/include/asm-arm/arch-ixp4xx/nslu2.h - echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config - rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \ - ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch -} - -do_deploy() { - install -d ${DEPLOY_DIR}/images - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${KERNEL_SUFFIX} -} - -do_deploy[dirs] = "${S}" - -addtask deploy before do_build after do_compile - -python () { - # Don't build openslug kernel unless we're targeting an nslu2 - mach = bb.data.getVar("MACHINE", d, 1) - dist = bb.data.getVar("DISTRO", d, 1) - if mach != 'nslu2' or dist != 'openslug': - raise bb.parse.SkipPackage("OpenSlug only builds for the Linksys NSLU2") -} diff --git a/packages/linux/openslug-kernel_2.6.7.bb b/packages/linux/openslug-kernel_2.6.7.bb deleted file mode 100644 index e40d8c03bc..0000000000 --- a/packages/linux/openslug-kernel_2.6.7.bb +++ /dev/null @@ -1,43 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux kernel for the Linksys NSLU2 device" -LICENSE = "GPL" -MAINTAINER = "Chris Larson <kergoth@handhelds.org>" -PR = "r1" - -KERNEL_SUFFIX = "openslug" - -SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.7.tar.bz2 \ - file://arm-Makefile.patch;patch=1 \ - file://ipx4xx-pci.patch;patch=1 \ - file://arm-timer.patch;patch=1 \ - file://x1205-rtc.patch;patch=1;pnum=0 \ - cvs://anonymous@cvs.sourceforge.net/cvsroot/nslu;module=anyu2/source;method=pserver \ - file://defconfig" -S = "${WORKDIR}/linux-2.6.7" - -COMPATIBLE_HOST = 'arm.*-linux' - -inherit kernel - -ARCH = "arm" -KERNEL_IMAGETYPE = "zImage" -CMDLINE_CONSOLE ?= "ttyS0,115200n8" -CMDLINE_ROOT = "root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000" -CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config - install -m 0644 ${WORKDIR}/source/x1205-rtc.c ${S}/drivers/i2c/chips/x1205-rtc.c - echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config - rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \ - ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch -} - -do_deploy() { - install -d ${DEPLOY_DIR}/images - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${KERNEL_SUFFIX} -} - -do_deploy[dirs] = "${S}" - -addtask deploy before do_build after do_compile diff --git a/packages/linux/openslug-kernel_2.6.9.bb b/packages/linux/openslug-kernel_2.6.9.bb deleted file mode 100644 index 5397a8fbcc..0000000000 --- a/packages/linux/openslug-kernel_2.6.9.bb +++ /dev/null @@ -1,63 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux kernel for the Linksys NSLU2 device" -LICENSE = "GPL" -MAINTAINER = "Chris Larson <kergoth@handhelds.org>" -PR = "r11" - -KERNEL_SUFFIX = "openslug" - -SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.9.tar.bz2 \ - file://nslu2_2.6.9.patch;patch=1 \ - file://double_cpdo.patch;patch=1 \ - file://alignment.patch;patch=1 \ - file://usbnet.patch;patch=1 \ - file://defconfig \ - file://x1205-rtc.c \ - file://nslu2-io.c \ - file://nslu2-setup.c \ - file://nslu2-pci.c \ - file://nslu2-part.c \ - file://nslu2.h" -S = "${WORKDIR}/linux-2.6.9" - -COMPATIBLE_HOST = 'arm.*-linux' - -inherit kernel - -ARCH = "arm" -KERNEL_IMAGETYPE = "zImage" -CMDLINE_CONSOLE ?= "ttyS0,115200n8" -#CMDLINE_ROOT = "root=/dev/slug rootfstype=ext2,jffs2 initrd=0x01000000,10M mem=32M@0x00000000" -#CMDLINE_ROOT = "root=/dev/mtdblock4 rootfstype=jffs2 mem=32M@0x00000000" -CMDLINE_ROOT = "root=/dev/ram0 rw rootfstype=ext2,jffs2 initrd=0x01000000,10M init=/linuxrc mem=32M@0x00000000" -CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_CONSOLE}" - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config - install -m 0644 ${WORKDIR}/x1205-rtc.c ${S}/drivers/i2c/chips/x1205-rtc.c - install -m 0644 ${WORKDIR}/nslu2-io.c ${S}/arch/arm/mach-ixp4xx/nslu2-io.c - install -m 0644 ${WORKDIR}/nslu2-setup.c ${S}/arch/arm/mach-ixp4xx/nslu2-setup.c - install -m 0644 ${WORKDIR}/nslu2-pci.c ${S}/arch/arm/mach-ixp4xx/nslu2-pci.c - install -m 0644 ${WORKDIR}/nslu2-part.c ${S}/arch/arm/mach-ixp4xx/nslu2-part.c - install -m 0644 ${WORKDIR}/nslu2.h ${S}/include/asm-arm/arch-ixp4xx/nslu2.h - echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config - rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \ - ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch -} - -do_deploy() { - install -d ${DEPLOY_DIR}/images - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${KERNEL_SUFFIX} -} - -do_deploy[dirs] = "${S}" - -addtask deploy before do_build after do_compile - -python () { - # Don't build openslug kernel unless we're targeting an nslu2 - mach = bb.data.getVar("MACHINE", d, 1) - dist = bb.data.getVar("DISTRO", d, 1) - if mach != 'nslu2' or dist != 'openslug': - raise bb.parse.SkipPackage("OpenSlug only builds for the Linksys NSLU2") -} |