aboutsummaryrefslogtreecommitdiffstats
path: root/recipes/u-boot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch
diff options
context:
space:
mode:
Diffstat (limited to 'recipes/u-boot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch')
-rw-r--r--recipes/u-boot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch1809
1 files changed, 1809 insertions, 0 deletions
diff --git a/recipes/u-boot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch b/recipes/u-boot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch
new file mode 100644
index 0000000000..5018cd3434
--- /dev/null
+++ b/recipes/u-boot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch
@@ -0,0 +1,1809 @@
+fe298a1bbd7b9526ca1139da8977e1a076c4e176
+diff --git a/Makefile b/Makefile
+index d2534ab..d172411 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1621,6 +1621,30 @@ MPC8360EMDS_SLAVE_config: unconfig
+ MPC8349ITX_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
+
++MPC832XEMDS_config \
++MPC832XEMDS_HOST_33_config \
++MPC832XEMDS_HOST_66_config \
++MPC832XEMDS_SLAVE_config: unconfig
++ @echo "" >include/config.h ; \
++ if [ "$(findstring _HOST_,$@)" ] ; then \
++ echo -n "... PCI HOST " ; \
++ echo "#define CONFIG_PCI" >>include/config.h ; \
++ fi ; \
++ if [ "$(findstring _SLAVE_,$@)" ] ; then \
++ echo "...PCI SLAVE 66M" ; \
++ echo "#define CONFIG_PCI" >>include/config.h ; \
++ echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
++ fi ; \
++ if [ "$(findstring _33_,$@)" ] ; then \
++ echo -n "...33M ..." ; \
++ echo "#define PCI_33M" >>include/config.h ; \
++ fi ; \
++ if [ "$(findstring _66_,$@)" ] ; then \
++ echo -n "...66M..." ; \
++ echo "#define PCI_66M" >>include/config.h ; \
++ fi ;
++ @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
++
+ #########################################################################
+ ## MPC85xx Systems
+ #########################################################################
+diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile
+new file mode 100644
+index 0000000..5ec7a87
+--- /dev/null
++++ b/board/mpc832xemds/Makefile
+@@ -0,0 +1,50 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).a
++
++COBJS := $(BOARD).o pci.o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS)
++ $(AR) $(ARFLAGS) $@ $(OBJS)
++
++clean:
++ rm -f $(SOBJS) $(OBJS)
++
++distclean: clean
++ rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/mpc832xemds/config.mk b/board/mpc832xemds/config.mk
+new file mode 100644
+index 0000000..6c3eca7
+--- /dev/null
++++ b/board/mpc832xemds/config.mk
+@@ -0,0 +1,28 @@
++#
++# (C) Copyright 2006
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++#
++# MPC832XEMDS
++#
++
++TEXT_BASE = 0xFE000000
+diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c
+new file mode 100644
+index 0000000..772da67
+--- /dev/null
++++ b/board/mpc832xemds/mpc832xemds.c
+@@ -0,0 +1,176 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * Dave Liu <daveliu@freescale.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <common.h>
++#include <ioports.h>
++#include <mpc83xx.h>
++#include <i2c.h>
++#include <spd.h>
++#include <miiphy.h>
++#include <command.h>
++#if defined(CONFIG_PCI)
++#include <pci.h>
++#endif
++#if defined(CONFIG_SPD_EEPROM)
++#include <spd_sdram.h>
++#else
++#include <asm/mmu.h>
++#endif
++#if defined(CONFIG_OF_FLAT_TREE)
++#include <ft_build.h>
++#endif
++
++const qe_iop_conf_t qe_iop_conf_tab[] = {
++ /* ETH3 */
++ {1, 0, 1, 0, 1}, /* TxD0 */
++ {1, 1, 1, 0, 1}, /* TxD1 */
++ {1, 2, 1, 0, 1}, /* TxD2 */
++ {1, 3, 1, 0, 1}, /* TxD3 */
++ {1, 9, 1, 0, 1}, /* TxER */
++ {1, 12, 1, 0, 1}, /* TxEN */
++ {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
++
++ {1, 4, 2, 0, 1}, /* RxD0 */
++ {1, 5, 2, 0, 1}, /* RxD1 */
++ {1, 6, 2, 0, 1}, /* RxD2 */
++ {1, 7, 2, 0, 1}, /* RxD3 */
++ {1, 8, 2, 0, 1}, /* RxER */
++ {1, 10, 2, 0, 1}, /* RxDV */
++ {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
++ {1, 11, 2, 0, 1}, /* COL */
++ {1, 13, 2, 0, 1}, /* CRS */
++
++ /* ETH4 */
++ {1, 18, 1, 0, 1}, /* TxD0 */
++ {1, 19, 1, 0, 1}, /* TxD1 */
++ {1, 20, 1, 0, 1}, /* TxD2 */
++ {1, 21, 1, 0, 1}, /* TxD3 */
++ {1, 27, 1, 0, 1}, /* TxER */
++ {1, 30, 1, 0, 1}, /* TxEN */
++ {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */
++
++ {1, 22, 2, 0, 1}, /* RxD0 */
++ {1, 23, 2, 0, 1}, /* RxD1 */
++ {1, 24, 2, 0, 1}, /* RxD2 */
++ {1, 25, 2, 0, 1}, /* RxD3 */
++ {1, 26, 1, 0, 1}, /* RxER */
++ {1, 28, 2, 0, 1}, /* Rx_DV */
++ {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */
++ {1, 29, 2, 0, 1}, /* COL */
++ {1, 31, 2, 0, 1}, /* CRS */
++
++ {3, 4, 3, 0, 2}, /* MDIO */
++ {3, 5, 1, 0, 2}, /* MDC */
++
++ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
++};
++
++int board_early_init_f(void)
++{
++ volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
++
++ /* Enable flash write */
++ bcsr[9] &= ~0x08;
++
++ return 0;
++}
++
++int fixed_sdram(void);
++
++long int initdram(int board_type)
++{
++ volatile immap_t *im = (immap_t *) CFG_IMMR;
++ u32 msize = 0;
++
++ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
++ return -1;
++
++ /* DDR SDRAM - Main SODIMM */
++ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
++
++ msize = fixed_sdram();
++
++ puts("\n DDR RAM: ");
++
++ /* return total bus SDRAM size(bytes) -- DDR */
++ return (msize * 1024 * 1024);
++}
++
++/*************************************************************************
++ * fixed sdram init -- doesn't use serial presence detect.
++ ************************************************************************/
++int fixed_sdram(void)
++{
++ volatile immap_t *im = (immap_t *) CFG_IMMR;
++ u32 msize = 0;
++ u32 ddr_size;
++ u32 ddr_size_log2;
++
++ msize = CFG_DDR_SIZE;
++ for (ddr_size = msize << 20, ddr_size_log2 = 0;
++ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
++ if (ddr_size & 1) {
++ return -1;
++ }
++ }
++ im->sysconf.ddrlaw[0].ar =
++ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
++#if (CFG_DDR_SIZE != 128)
++#warning Currenly any ddr size other than 128 is not supported
++#endif
++ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
++ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
++ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
++ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
++ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
++ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
++ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
++ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
++ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
++ im->ddr.sdram_mode = CFG_DDR_MODE;
++ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
++ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
++ __asm__ __volatile__ ("sync");
++ udelay(200);
++
++ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
++ __asm__ __volatile__ ("sync");
++ return msize;
++}
++
++int checkboard(void)
++{
++ puts("Board: Freescale MPC832XEMDS\n");
++ return 0;
++}
++
++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
++void
++ft_board_setup(void *blob, bd_t *bd)
++{
++ u32 *p;
++ int len;
++
++#ifdef CONFIG_PCI
++ ft_pci_setup(blob, bd);
++#endif
++ ft_cpu_setup(blob, bd);
++
++ p = ft_get_prop(blob, "/memory/reg", &len);
++ if (p != NULL) {
++ *p++ = cpu_to_be32(bd->bi_memstart);
++ *p = cpu_to_be32(bd->bi_memsize);
++ }
++}
++#endif
+diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c
+new file mode 100644
+index 0000000..09f3ac3
+--- /dev/null
++++ b/board/mpc832xemds/pci.c
+@@ -0,0 +1,313 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++/*
++ * PCI Configuration space access support for MPC83xx PCI Bridge
++ */
++#include <asm/mmu.h>
++#include <asm/io.h>
++#include <common.h>
++#include <pci.h>
++#include <i2c.h>
++
++#include <asm/fsl_i2c.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if defined(CONFIG_PCI)
++#define PCI_FUNCTION_CONFIG 0x44
++#define PCI_FUNCTION_CFG_LOCK 0x20
++
++/*
++ * Initialize PCI Devices, report devices found
++ */
++#ifndef CONFIG_PCI_PNP
++static struct pci_config_table pci_mpc83xxemds_config_table[] = {
++ {
++ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ pci_cfgfunc_config_device,
++ {PCI_ENET0_IOADDR,
++ PCI_ENET0_MEMADDR,
++ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
++ },
++ {}
++}
++#endif
++static struct pci_controller hose[] = {
++ {
++#ifndef CONFIG_PCI_PNP
++ config_table:pci_mpc83xxemds_config_table,
++#endif
++ },
++};
++
++/**********************************************************************
++ * pci_init_board()
++ *********************************************************************/
++void pci_init_board(void)
++#ifdef CONFIG_PCISLAVE
++{
++ u16 reg16;
++ volatile immap_t *immr;
++ volatile law83xx_t *pci_law;
++ volatile pot83xx_t *pci_pot;
++ volatile pcictrl83xx_t *pci_ctrl;
++ volatile pciconf83xx_t *pci_conf;
++
++ immr = (immap_t *) CFG_IMMR;
++ pci_law = immr->sysconf.pcilaw;
++ pci_pot = immr->ios.pot;
++ pci_ctrl = immr->pci_ctrl;
++ pci_conf = immr->pci_conf;
++ /*
++ * Configure PCI Inbound Translation Windows
++ */
++ pci_ctrl[0].pitar0 = 0x0;
++ pci_ctrl[0].pibar0 = 0x0;
++ pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
++ PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
++
++ pci_ctrl[0].pitar1 = 0x0;
++ pci_ctrl[0].pibar1 = 0x0;
++ pci_ctrl[0].piebar1 = 0x0;
++ pci_ctrl[0].piwar1 &= ~PIWAR_EN;
++
++ pci_ctrl[0].pitar2 = 0x0;
++ pci_ctrl[0].pibar2 = 0x0;
++ pci_ctrl[0].piebar2 = 0x0;
++ pci_ctrl[0].piwar2 &= ~PIWAR_EN;
++
++ hose[0].first_busno = 0;
++ hose[0].last_busno = 0xff;
++ pci_setup_indirect(&hose[0],
++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++ reg16 = 0xff;
++
++ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
++ PCI_COMMAND, &reg16);
++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++ PCI_COMMAND, reg16);
++
++ /*
++ * Clear non-reserved bits in status register.
++ */
++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++ PCI_STATUS, 0xffff);
++ pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
++ PCI_LATENCY_TIMER, 0x80);
++
++ /*
++ * Unlock configuration lock in PCI function configuration register.
++ */
++ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
++ PCI_FUNCTION_CONFIG, &reg16);
++ reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
++ PCI_FUNCTION_CONFIG, reg16);
++
++ printf("Enabled PCI 32bit Agent Mode\n");
++}
++#else
++{
++ volatile immap_t *immr;
++ volatile clk83xx_t *clk;
++ volatile law83xx_t *pci_law;
++ volatile pot83xx_t *pci_pot;
++ volatile pcictrl83xx_t *pci_ctrl;
++ volatile pciconf83xx_t *pci_conf;
++
++ u8 val8, orig_i2c_bus;
++ u16 reg16;
++ u32 val32;
++ u32 dev;
++
++ immr = (immap_t *) CFG_IMMR;
++ clk = (clk83xx_t *) & immr->clk;
++ pci_law = immr->sysconf.pcilaw;
++ pci_pot = immr->ios.pot;
++ pci_ctrl = immr->pci_ctrl;
++ pci_conf = immr->pci_conf;
++ /*
++ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
++ */
++ val32 = clk->occr;
++ udelay(2000);
++#if defined(PCI_66M)
++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++ printf("PCI clock is 66MHz\n");
++#elif defined(PCI_33M)
++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
++ OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
++ printf("PCI clock is 33MHz\n");
++#else
++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
++ printf("PCI clock is 66MHz\n");
++#endif
++ udelay(2000);
++
++ /*
++ * Configure PCI Local Access Windows
++ */
++ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
++ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
++
++ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
++ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
++
++ /*
++ * Configure PCI Outbound Translation Windows
++ */
++
++ /* PCI mem space - prefetch */
++ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
++ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
++ pci_pot[0].pocmr =
++ POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
++
++ /* PCI mmio - non-prefetch mem space */
++ pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
++ pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
++ pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
++
++ /* PCI IO space */
++ pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
++ pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
++ pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
++
++ /*
++ * Configure PCI Inbound Translation Windows
++ */
++ pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
++ pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
++ pci_ctrl[0].piebar1 = 0x0;
++ pci_ctrl[0].piwar1 =
++ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
++ PIWAR_IWS_2G;
++
++ /*
++ * Assign PIB PMC slot to desired PCI bus
++ */
++
++ /* Switch temporarily to I2C bus #2 */
++ orig_i2c_bus = i2c_get_bus_num();
++ i2c_set_bus_num(1);
++
++ val8 = 0;
++ i2c_write(0x23, 0x6, 1, &val8, 1);
++ i2c_write(0x23, 0x7, 1, &val8, 1);
++ val8 = 0xff;
++ i2c_write(0x23, 0x2, 1, &val8, 1);
++ i2c_write(0x23, 0x3, 1, &val8, 1);
++
++ val8 = 0;
++ i2c_write(0x26, 0x6, 1, &val8, 1);
++ val8 = 0x34;
++ i2c_write(0x26, 0x7, 1, &val8, 1);
++
++ val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */
++ i2c_write(0x26, 0x2, 1, &val8, 1);
++ val8 = 0xff;
++ i2c_write(0x26, 0x3, 1, &val8, 1);
++
++ val8 = 0;
++ i2c_write(0x27, 0x6, 1, &val8, 1);
++ i2c_write(0x27, 0x7, 1, &val8, 1);
++ val8 = 0xff;
++ i2c_write(0x27, 0x2, 1, &val8, 1);
++ val8 = 0xef;
++ i2c_write(0x27, 0x3, 1, &val8, 1);
++ asm("eieio");
++
++ /* Reset to original I2C bus */
++ i2c_set_bus_num(orig_i2c_bus);
++
++ /*
++ * Release PCI RST Output signal
++ */
++ udelay(2000);
++ pci_ctrl[0].gcr = 1;
++ udelay(2000);
++
++ hose[0].first_busno = 0;
++ hose[0].last_busno = 0xff;
++
++ /* PCI memory prefetch space */
++ pci_set_region(hose[0].regions + 0,
++ CFG_PCI_MEM_BASE,
++ CFG_PCI_MEM_PHYS,
++ CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
++
++ /* PCI memory space */
++ pci_set_region(hose[0].regions + 1,
++ CFG_PCI_MMIO_BASE,
++ CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
++
++ /* PCI IO space */
++ pci_set_region(hose[0].regions + 2,
++ CFG_PCI_IO_BASE,
++ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
++
++ /* System memory space */
++ pci_set_region(hose[0].regions + 3,
++ CFG_PCI_SLV_MEM_LOCAL,
++ CFG_PCI_SLV_MEM_BUS,
++ CFG_PCI_SLV_MEM_SIZE,
++ PCI_REGION_MEM | PCI_REGION_MEMORY);
++
++ hose[0].region_count = 4;
++
++ pci_setup_indirect(&hose[0],
++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
++
++ pci_register_hose(hose);
++
++ /*
++ * Write command register
++ */
++ reg16 = 0xff;
++ dev = PCI_BDF(0, 0, 0);
++ pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++ pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
++
++ /*
++ * Clear non-reserved bits in status register.
++ */
++ pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
++ pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
++ pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
++
++ printf("PCI 32bit bus on PMC2 & PMC3\n");
++
++ /*
++ * Hose scan.
++ */
++ hose->last_busno = pci_hose_scan(hose);
++}
++#endif /* CONFIG_PCISLAVE */
++
++#ifdef CONFIG_OF_FLAT_TREE
++void
++ft_pci_setup(void *blob, bd_t *bd)
++{
++ u32 *p;
++ int len;
++
++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
++ if (p != NULL) {
++ p[0] = hose[0].first_busno;
++ p[1] = hose[0].last_busno;
++ }
++}
++#endif /* CONFIG_OF_FLAT_TREE */
++#endif /* CONFIG_PCI */
+diff --git a/board/mpc832xemds/u-boot.lds b/board/mpc832xemds/u-boot.lds
+new file mode 100644
+index 0000000..937c87a
+--- /dev/null
++++ b/board/mpc832xemds/u-boot.lds
+@@ -0,0 +1,123 @@
++/*
++ * (C) Copyright 2006
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_ARCH(powerpc)
++SECTIONS
++{
++ /* Read-only sections, merged into text segment: */
++ . = + SIZEOF_HEADERS;
++ .interp : { *(.interp) }
++ .hash : { *(.hash) }
++ .dynsym : { *(.dynsym) }
++ .dynstr : { *(.dynstr) }
++ .rel.text : { *(.rel.text) }
++ .rela.text : { *(.rela.text) }
++ .rel.data : { *(.rel.data) }
++ .rela.data : { *(.rela.data) }
++ .rel.rodata : { *(.rel.rodata) }
++ .rela.rodata : { *(.rela.rodata) }
++ .rel.got : { *(.rel.got) }
++ .rela.got : { *(.rela.got) }
++ .rel.ctors : { *(.rel.ctors) }
++ .rela.ctors : { *(.rela.ctors) }
++ .rel.dtors : { *(.rel.dtors) }
++ .rela.dtors : { *(.rela.dtors) }
++ .rel.bss : { *(.rel.bss) }
++ .rela.bss : { *(.rela.bss) }
++ .rel.plt : { *(.rel.plt) }
++ .rela.plt : { *(.rela.plt) }
++ .init : { *(.init) }
++ .plt : { *(.plt) }
++ .text :
++ {
++ cpu/mpc83xx/start.o (.text)
++ *(.text)
++ *(.fixup)
++ *(.got1)
++ . = ALIGN(16);
++ *(.rodata)
++ *(.rodata1)
++ *(.rodata.str1.4)
++ *(.eh_frame)
++ }
++ .fini : { *(.fini) } =0
++ .ctors : { *(.ctors) }
++ .dtors : { *(.dtors) }
++
++ /* Read-write section, merged into data segment: */
++ . = (. + 0x0FFF) & 0xFFFFF000;
++ _erotext = .;
++ PROVIDE (erotext = .);
++ .reloc :
++ {
++ *(.got)
++ _GOT2_TABLE_ = .;
++ *(.got2)
++ _FIXUP_TABLE_ = .;
++ *(.fixup)
++ }
++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
++
++ .data :
++ {
++ *(.data)
++ *(.data1)
++ *(.sdata)
++ *(.sdata2)
++ *(.dynamic)
++ CONSTRUCTORS
++ }
++ _edata = .;
++ PROVIDE (edata = .);
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++
++ . = .;
++ __start___ex_table = .;
++ __ex_table : { *(__ex_table) }
++ __stop___ex_table = .;
++
++ . = ALIGN(4096);
++ __init_begin = .;
++ .text.init : { *(.text.init) }
++ .data.init : { *(.data.init) }
++ . = ALIGN(4096);
++ __init_end = .;
++
++ __bss_start = .;
++ .bss :
++ {
++ *(.sbss) *(.scommon)
++ *(.dynbss)
++ *(.bss)
++ *(COMMON)
++ }
++ _end = . ;
++ PROVIDE (end = .);
++}
++ENTRY(_start)
+diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
+index 1b51078..bc61219 100644
+--- a/cpu/mpc83xx/cpu.c
++++ b/cpu/mpc83xx/cpu.c
+@@ -92,6 +92,22 @@ int checkcpu(void)
+ case SPR_8360_REV12:
+ puts("MPC8360, ");
+ break;
++ case SPR_8323E_REV10:
++ case SPR_8323E_REV11:
++ puts("MPC8323E, ");
++ break;
++ case SPR_8323_REV10:
++ case SPR_8323_REV11:
++ puts("MPC8323, ");
++ break;
++ case SPR_8321E_REV10:
++ case SPR_8321E_REV11:
++ puts("MPC8321E, ");
++ break;
++ case SPR_8321_REV10:
++ case SPR_8321_REV11:
++ puts("MPC8321, ");
++ break;
+ default:
+ puts("Rev: Unknown\n");
+ return -1; /* Not sure what this is */
+diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
+index 7574fab..eb256e5 100644
+--- a/cpu/mpc83xx/cpu_init.c
++++ b/cpu/mpc83xx/cpu_init.c
+@@ -119,6 +119,11 @@ void cpu_init_f (volatile immap_t * im)
+ #ifdef CFG_SICRL
+ im->sysconf.sicrl = CFG_SICRL;
+ #endif
++ /* DDR control driver register */
++#ifdef CFG_DDRCDR
++ im->sysconf.ddrcdr = CFG_DDRCDR;
++#endif
++
+ #ifdef CONFIG_QE
+ /* Config QE ioports */
+ config_qe_ioports();
+diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
+index 40ba6b0..9fd1bf1 100644
+--- a/cpu/mpc83xx/speed.c
++++ b/cpu/mpc83xx/speed.c
+@@ -107,15 +107,19 @@ int get_clocks(void)
+ #endif
+ u32 core_clk;
+ u32 i2c1_clk;
++#if !defined(CONFIG_MPC832X)
+ u32 i2c2_clk;
++#endif
+ u32 enc_clk;
+ u32 lbiu_clk;
+ u32 lclk_clk;
+ u32 ddr_clk;
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
++ u32 ddr_sec_clk;
++#endif
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ u32 qepmf;
+ u32 qepdf;
+- u32 ddr_sec_clk;
+ u32 qe_clk;
+ u32 brg_clk;
+ #endif
+@@ -227,10 +231,12 @@ int get_clocks(void)
+ return -9;
+ }
+ #endif
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ i2c1_clk = csb_clk;
+ #endif
++#if !defined(CONFIG_MPC832X)
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
++#endif
+
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+@@ -249,12 +255,9 @@ int get_clocks(void)
+ /* unkown SCCR_ENCCM value */
+ return -6;
+ }
+-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
++
+ lbiu_clk = csb_clk *
+ (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+-#else
+-#error Unknown MPC83xx chip
+-#endif
+ lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+ switch (lcrr) {
+ case 2:
+@@ -266,17 +269,14 @@ int get_clocks(void)
+ /* unknown lcrr */
+ return -10;
+ }
+-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
++
+ ddr_clk = csb_clk *
+ (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
+ corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
+ ddr_sec_clk = csb_clk * (1 +
+ ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+ #endif
+-#else
+-#error Unknown MPC83xx chip
+-#endif
+
+ corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
+ if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
+@@ -306,7 +306,7 @@ int get_clocks(void)
+ return -12;
+ }
+
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
+ qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
+ qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
+@@ -322,13 +322,17 @@ int get_clocks(void)
+ #endif
+ gd->core_clk = core_clk;
+ gd->i2c1_clk = i2c1_clk;
++#if !defined(CONFIG_MPC832X)
+ gd->i2c2_clk = i2c2_clk;
++#endif
+ gd->enc_clk = enc_clk;
+ gd->lbiu_clk = lbiu_clk;
+ gd->lclk_clk = lclk_clk;
+ gd->ddr_clk = ddr_clk;
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
+ gd->ddr_sec_clk = ddr_sec_clk;
++#endif
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ gd->qe_clk = qe_clk;
+ gd->brg_clk = brg_clk;
+ #endif
+@@ -352,18 +356,21 @@ int print_clock_conf(void)
+ printf("Clock configuration:\n");
+ printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+ printf(" Core: %4d MHz\n", gd->core_clk / 1000000);
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ printf(" QE: %4d MHz\n", gd->qe_clk / 1000000);
++ printf(" BRG: %4d MHz\n", gd->brg_clk / 1000000);
+ #endif
+ printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
+ printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000);
+ printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000);
+-#if defined (CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360)
+ printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000);
+ #endif
+ printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000);
+ printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000);
++#if !defined(CONFIG_MPC832X)
+ printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000);
++#endif
+ #if defined(CONFIG_MPC8349)
+ printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000);
+ printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000);
+diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
+index f7f8ed0..0bcd0a9 100644
+--- a/drivers/qe/qe.h
++++ b/drivers/qe/qe.h
+@@ -30,7 +30,7 @@
+ #define UCC_MAX_NUM 8
+
+ #define QE_DATAONLY_BASE (uint)(128)
+-#define QE_DATAONLY_SIZE ((uint)(0xc000) - QE_DATAONLY_BASE)
++#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE)
+
+ /* QE threads SNUM
+ */
+diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
+index c44a5be..aea455b 100644
+--- a/drivers/qe/uec.c
++++ b/drivers/qe/uec.c
+@@ -432,7 +432,12 @@ static int init_phy(struct eth_device *dev)
+ }
+ memset(mii_info, 0, sizeof(*mii_info));
+
+- mii_info->speed = SPEED_1000;
++ if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
++ mii_info->speed = SPEED_1000;
++ } else {
++ mii_info->speed = SPEED_100;
++ }
++
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->pause = 0;
+ mii_info->link = 1;
+@@ -508,7 +513,8 @@ static void adjust_link(struct eth_device *dev)
+ }
+
+ if (mii_info->speed != uec->oldspeed) {
+- switch (mii_info->speed) {
++ if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
++ switch (mii_info->speed) {
+ case 1000:
+ break;
+ case 100:
+@@ -531,6 +537,7 @@ static void adjust_link(struct eth_device *dev)
+ printf("%s: Ack,Speed(%d)is illegal\n",
+ dev->name, mii_info->speed);
+ break;
++ }
+ }
+
+ printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
+diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
+index 79dcae4..ff9512f 100644
+--- a/include/asm-ppc/e300.h
++++ b/include/asm-ppc/e300.h
+@@ -15,6 +15,11 @@
+ #define PVR_8360_REV10 (PVR_83xx | 0x0020)
+ #define PVR_8360_REV11 (PVR_83xx | 0x0020)
+
++#if defined(CONFIG_MPC832X)
++#undef PVR_83xx
++#define PVR_83xx 0x80840000
++#endif
++
+ /*
+ * Hardware Implementation-Dependent Register 0 (HID0)
+ */
+diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
+index 67b035c..77a079f 100644
+--- a/include/asm-ppc/immap_83xx.h
++++ b/include/asm-ppc/immap_83xx.h
+@@ -60,7 +60,10 @@ typedef struct sysconf83xx {
+ u32 spcr; /* System Priority Configuration Register */
+ u32 sicrl; /* System I/O Configuration Register Low */
+ u32 sicrh; /* System I/O Configuration Register High */
+- u8 res6[0xE4];
++ u8 res6[0x0C];
++ u32 ddrcdr; /* DDR Control Driver Register */
++ u32 ddrdsr; /* DDR Debug Status Register */
++ u8 res7[0xD0];
+ } sysconf83xx_t;
+
+ /*
+@@ -274,25 +277,35 @@ typedef struct ddr83xx {
+ ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */
+ u8 res0[0x60];
+ u32 cs_config[4]; /* Chip Select x Configuration */
+- u8 res1[0x78];
++ u8 res1[0x70];
++ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
++ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+- u8 res2[4];
++ u32 sdram_cfg2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+- u8 res3[8];
++ u32 sdram_mode2; /* SDRAM Mode Configuration 2 */
++ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+- u8 res9[8];
+- u32 sdram_clk_cntl;
+- u8 res4[0xCCC];
++ u32 ddr_data_init; /* SDRAM Data Initialization */
++ u8 res2[4];
++ u32 sdram_clk_cntl; /* SDRAM Clock Control */
++ u8 res3[0x14];
++ u32 ddr_init_addr; /* DDR training initialization address */
++ u32 ddr_init_ext_addr; /* DDR training initialization extended address */
++ u8 res4[0xAA8];
++ u32 ddr_ip_rev1; /* DDR IP block revision 1 */
++ u32 ddr_ip_rev2; /* DDR IP block revision 2 */
++ u8 res5[0x200];
+ u32 data_err_inject_hi; /* Memory Data Path Error Injection Mask High */
+ u32 data_err_inject_lo; /* Memory Data Path Error Injection Mask Low */
+ u32 ecc_err_inject; /* Memory Data Path Error Injection Mask ECC */
+- u8 res5[0x14];
++ u8 res6[0x14];
+ u32 capture_data_hi; /* Memory Data Path Read Capture High */
+ u32 capture_data_lo; /* Memory Data Path Read Capture Low */
+ u32 capture_ecc; /* Memory Data Path Read Capture ECC */
+- u8 res6[0x14];
++ u8 res7[0x14];
+ u32 err_detect; /* Memory Error Detect */
+ u32 err_disable; /* Memory Error Disable */
+ u32 err_int_en; /* Memory Error Interrupt Enable */
+@@ -300,9 +313,9 @@ typedef struct ddr83xx {
+ u32 capture_address; /* Memory Error Address Capture */
+ u32 capture_ext_address;/* Memory Error Extended Address Capture */
+ u32 err_sbe; /* Memory Single-Bit ECC Error Management */
+- u8 res7[0xA4];
++ u8 res8[0xA4];
+ u32 debug_reg;
+- u8 res8[0xFC];
++ u8 res9[0xFC];
+ } ddr83xx_t;
+
+ /*
+@@ -607,6 +620,43 @@ typedef struct immap {
+ u8 res10[0xC0000];
+ u8 qe[0x100000]; /* QE block */
+ } immap_t;
++
++#elif defined(CONFIG_MPC832X)
++typedef struct immap {
++ sysconf83xx_t sysconf; /* System configuration */
++ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
++ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
++ rtclk83xx_t pit; /* Periodic Interval Timer */
++ gtm83xx_t gtm[2]; /* Global Timers Module */
++ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
++ arbiter83xx_t arbiter; /* System Arbiter Registers */
++ reset83xx_t reset; /* Reset Module */
++ clk83xx_t clk; /* System Clock Module */
++ pmc83xx_t pmc; /* Power Management Control Module */
++ qepi83xx_t qepi; /* QE Ports Interrupts Registers */
++ u8 res0[0x300];
++ u8 dll_ddr[0x100];
++ u8 dll_lbc[0x100];
++ u8 res1[0x200];
++ qepio83xx_t qepio; /* QE Parallel I/O ports */
++ u8 res2[0x800];
++ ddr83xx_t ddr; /* DDR Memory Controller Memory */
++ fsl_i2c_t i2c[2]; /* I2C Controllers */
++ u8 res3[0x1300];
++ duart83xx_t duart[2]; /* DUART */
++ u8 res4[0x900];
++ lbus83xx_t lbus; /* Local Bus Controller Registers */
++ u8 res5[0x2000];
++ dma83xx_t dma; /* DMA */
++ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
++ u8 res6[128];
++ ios83xx_t ios; /* Sequencer (IOS) */
++ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
++ u8 res7[0x27A00];
++ security83xx_t security;
++ u8 res8[0xC0000];
++ u8 qe[0x100000]; /* QE block */
++} immap_t;
+ #endif
+
+ #endif /* __IMMAP_83xx__ */
+diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
+index f385032..950b949 100644
+--- a/include/asm-ppc/immap_qe.h
++++ b/include/asm-ppc/immap_qe.h
+@@ -547,4 +547,10 @@ typedef struct qe_immap {
+
+ extern qe_map_t *qe_immr;
+
++#if defined(CONFIG_MPC8360)
++#define QE_MURAM_SIZE 0xc000UL
++#elif defined(CONFIG_MPC832X)
++#define QE_MURAM_SIZE 0x4000UL
++#endif
++
+ #endif /* __IMMAP_QE_H__ */
+diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
+new file mode 100644
+index 0000000..b8bf00f
+--- /dev/null
++++ b/include/configs/MPC832XEMDS.h
+@@ -0,0 +1,629 @@
++/*
++ * Copyright (C) 2006 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#undef DEBUG
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_E300 1 /* E300 family */
++#define CONFIG_QE 1 /* Has QE */
++#define CONFIG_MPC83XX 1 /* MPC83xx family */
++#define CONFIG_MPC832X 1 /* MPC832x CPU specific */
++#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */
++
++/*
++ * System Clock Setup
++ */
++#ifdef CONFIG_PCISLAVE
++#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
++#else
++#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
++#endif
++
++#ifndef CONFIG_SYS_CLK_FREQ
++#define CONFIG_SYS_CLK_FREQ 66000000
++#endif
++
++/*
++ * Hardware Reset Configuration Word
++ */
++#define CFG_HRCW_LOW (\
++ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
++ HRCWL_DDR_TO_SCB_CLK_2X1 |\
++ HRCWL_VCO_1X2 |\
++ HRCWL_CSB_TO_CLKIN_2X1 |\
++ HRCWL_CORE_TO_CSB_2X1 |\
++ HRCWL_CE_PLL_VCO_DIV_2 |\
++ HRCWL_CE_PLL_DIV_1X1 |\
++ HRCWL_CE_TO_PLL_1X3)
++
++#ifdef CONFIG_PCISLAVE
++#define CFG_HRCW_HIGH (\
++ HRCWH_PCI_AGENT |\
++ HRCWH_PCI1_ARBITER_DISABLE |\
++ HRCWH_CORE_ENABLE |\
++ HRCWH_FROM_0XFFF00100 |\
++ HRCWH_BOOTSEQ_DISABLE |\
++ HRCWH_SW_WATCHDOG_DISABLE |\
++ HRCWH_ROM_LOC_LOCAL_16BIT |\
++ HRCWH_BIG_ENDIAN |\
++ HRCWH_LALE_NORMAL)
++#else
++#define CFG_HRCW_HIGH (\
++ HRCWH_PCI_HOST |\
++ HRCWH_PCI1_ARBITER_ENABLE |\
++ HRCWH_CORE_ENABLE |\
++ HRCWH_FROM_0X00000100 |\
++ HRCWH_BOOTSEQ_DISABLE |\
++ HRCWH_SW_WATCHDOG_DISABLE |\
++ HRCWH_ROM_LOC_LOCAL_16BIT |\
++ HRCWH_BIG_ENDIAN |\
++ HRCWH_LALE_NORMAL)
++#endif
++
++/*
++ * System IO Config
++ */
++#define CFG_SICRL 0x00000000
++
++#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
++
++/*
++ * IMMR new address
++ */
++#define CFG_IMMR 0xE0000000
++
++/*
++ * DDR Setup
++ */
++#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
++#define CFG_SDRAM_BASE CFG_DDR_BASE
++#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
++#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */
++
++#undef CONFIG_SPD_EEPROM
++#if defined(CONFIG_SPD_EEPROM)
++/* Determine DDR configuration from I2C interface
++ */
++#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */
++#else
++/* Manually set up DDR parameters
++ */
++#define CFG_DDR_SIZE 128 /* MB */
++#define CFG_DDR_CS0_CONFIG 0x80840102
++#define CFG_DDR_TIMING_0 0x00220802
++#define CFG_DDR_TIMING_1 0x3935d322
++#define CFG_DDR_TIMING_2 0x0f9048ca
++#define CFG_DDR_TIMING_3 0x00000000
++#define CFG_DDR_CLK_CNTL 0x02000000
++#define CFG_DDR_MODE 0x44400232
++#define CFG_DDR_MODE2 0x8000c000
++#define CFG_DDR_INTERVAL 0x03200064
++#define CFG_DDR_CS0_BNDS 0x00000007
++#define CFG_DDR_SDRAM_CFG 0x43080000
++#define CFG_DDR_SDRAM_CFG2 0x00401000
++#endif
++
++/*
++ * Memory test
++ */
++#undef CFG_DRAM_TEST /* memory test, takes time */
++#define CFG_MEMTEST_START 0x00000000 /* memtest region */
++#define CFG_MEMTEST_END 0x00100000
++
++/*
++ * The reserved memory
++ */
++#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
++
++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
++#define CFG_RAMBOOT
++#else
++#undef CFG_RAMBOOT
++#endif
++
++#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
++#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
++
++/*
++ * Initial RAM Base Address Setup
++ */
++#define CFG_INIT_RAM_LOCK 1
++#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
++#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
++#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
++
++/*
++ * Local Bus Configuration & Clock Setup
++ */
++#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
++#define CFG_LBC_LBCR 0x00000000
++
++/*
++ * FLASH on the Local Bus
++ */
++#define CFG_FLASH_CFI /* use the Common Flash Interface */
++#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
++#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
++#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
++
++#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
++#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
++
++#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
++ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
++ BR_V) /* valid */
++#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */
++
++#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
++#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
++
++#undef CFG_FLASH_CHECKSUM
++
++/*
++ * BCSR on the Local Bus
++ */
++#define CFG_BCSR 0xF8000000
++#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
++#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
++
++#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
++#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
++
++/*
++ * SDRAM on the Local Bus
++ */
++#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */
++
++#ifdef CFG_LB_SDRAM
++#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
++#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
++
++#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE
++#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */
++
++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
++/*
++ * Base Register 2 and Option Register 2 configure SDRAM.
++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
++ *
++ * For BR2, need:
++ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
++ * port size = 32-bits = BR2[19:20] = 11
++ * no parity checking = BR2[21:22] = 00
++ * SDRAM for MSEL = BR2[24:26] = 011
++ * Valid = BR[31] = 1
++ *
++ * 0 4 8 12 16 20 24 28
++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
++ *
++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
++ * the top 17 bits of BR2.
++ */
++
++#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */
++
++/*
++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
++ *
++ * For OR2, need:
++ * 64MB mask for AM, OR2[0:7] = 1111 1100
++ * XAM, OR2[17:18] = 11
++ * 9 columns OR2[19-21] = 010
++ * 13 rows OR2[23-25] = 100
++ * EAD set for extra time OR[31] = 1
++ *
++ * 0 4 8 12 16 20 24 28
++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
++ */
++
++#define CFG_OR2_PRELIM 0xfc006901
++
++#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
++#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
++
++/*
++ * LSDMR masks
++ */
++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
++#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
++
++#define CFG_LBC_LSDMR_COMMON 0x0063b723
++
++/*
++ * SDRAM Controller configuration sequence.
++ */
++#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
++ | CFG_LBC_LSDMR_OP_PCHALL)
++#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
++ | CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
++ | CFG_LBC_LSDMR_OP_ARFRSH)
++#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
++ | CFG_LBC_LSDMR_OP_MRW)
++#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
++ | CFG_LBC_LSDMR_OP_NORMAL)
++
++#endif
++
++/*
++ * Windows to access PIB via local bus
++ */
++#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */
++#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */
++
++/*
++ * CS2 on Local Bus, to PIB
++ */
++#define CFG_BR2_PRELIM 0xf8008801 /* CS2 base address at 0xf8008000 */
++#define CFG_OR2_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
++
++/*
++ * CS3 on Local Bus, to PIB
++ */
++#define CFG_BR3_PRELIM 0xf8010801 /* CS3 base address at 0xf8010000 */
++#define CFG_OR3_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
++
++/*
++ * Serial Port
++ */
++#define CONFIG_CONS_INDEX 1
++#undef CONFIG_SERIAL_SOFTWARE_FIFO
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE 1
++#define CFG_NS16550_CLK get_bus_freq(0)
++
++#define CFG_BAUDRATE_TABLE \
++ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
++
++#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
++#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
++
++/* Use the HUSH parser */
++#define CFG_HUSH_PARSER
++#ifdef CFG_HUSH_PARSER
++#define CFG_PROMPT_HUSH_PS2 "> "
++#endif
++
++/* pass open firmware flat tree */
++#define CONFIG_OF_FLAT_TREE 1
++#define CONFIG_OF_BOARD_SETUP 1
++
++/* maximum size of the flat tree (8K) */
++#define OF_FLAT_TREE_MAX_SIZE 8192
++
++#define OF_CPU "PowerPC,8323@0"
++#define OF_SOC "soc8323@e0000000"
++#define OF_TBCLK (bd->bi_busfreq / 4)
++#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
++
++/* I2C */
++#define CONFIG_HARD_I2C /* I2C with hardware support */
++#undef CONFIG_SOFT_I2C /* I2C bit-banged */
++#define CONFIG_FSL_I2C
++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
++#define CFG_I2C_SLAVE 0x7F
++#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
++#define CFG_I2C_OFFSET 0x3000
++
++/*
++ * Config on-board RTC
++ */
++#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
++#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
++
++/*
++ * General PCI
++ * Addresses are mapped 1-1.
++ */
++#define CFG_PCI_MEM_BASE 0x80000000
++#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
++#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
++#define CFG_PCI_MMIO_BASE 0x90000000
++#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
++#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
++#define CFG_PCI_IO_BASE 0xE0300000
++#define CFG_PCI_IO_PHYS 0xE0300000
++#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
++
++#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
++#define CFG_PCI_SLV_MEM_BUS 0x00000000
++#define CFG_PCI_SLV_MEM_SIZE 0x80000000
++
++
++#ifdef CONFIG_PCI
++
++#define CONFIG_NET_MULTI
++#define CONFIG_PCI_PNP /* do pci plug-and-play */
++
++#undef CONFIG_EEPRO100
++#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
++#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
++
++#endif /* CONFIG_PCI */
++
++
++#ifndef CONFIG_NET_MULTI
++#define CONFIG_NET_MULTI 1
++#endif
++
++/*
++ * QE UEC ethernet configuration
++ */
++#define CONFIG_UEC_ETH
++#define CONFIG_ETHPRIME "Freescale GETH"
++
++#define CONFIG_UEC_ETH1 /* ETH3 */
++
++#ifdef CONFIG_UEC_ETH1
++#define CFG_UEC1_UCC_NUM 2 /* UCC3 */
++#define CFG_UEC1_RX_CLK QE_CLK9
++#define CFG_UEC1_TX_CLK QE_CLK10
++#define CFG_UEC1_ETH_TYPE FAST_ETH
++#define CFG_UEC1_PHY_ADDR 3
++#define CFG_UEC1_INTERFACE_MODE ENET_100_MII
++#endif
++
++#define CONFIG_UEC_ETH2 /* ETH4 */
++
++#ifdef CONFIG_UEC_ETH2
++#define CFG_UEC2_UCC_NUM 3 /* UCC4 */
++#define CFG_UEC2_RX_CLK QE_CLK7
++#define CFG_UEC2_TX_CLK QE_CLK8
++#define CFG_UEC2_ETH_TYPE FAST_ETH
++#define CFG_UEC2_PHY_ADDR 4
++#define CFG_UEC2_INTERFACE_MODE ENET_100_MII
++#endif
++
++/*
++ * Environment
++ */
++#ifndef CFG_RAMBOOT
++ #define CFG_ENV_IS_IN_FLASH 1
++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
++ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
++ #define CFG_ENV_SIZE 0x2000
++#else
++ #define CFG_NO_FLASH 1 /* Flash is not usable now */
++ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
++ #define CFG_ENV_SIZE 0x2000
++#endif
++
++#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
++#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
++
++#if defined(CFG_RAMBOOT)
++#if defined(CONFIG_PCI)
++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
++ | CFG_CMD_PING \
++ | CFG_CMD_ASKENV \
++ | CFG_CMD_PCI \
++ | CFG_CMD_I2C) \
++ & \
++ ~(CFG_CMD_ENV \
++ | CFG_CMD_LOADS))
++#else
++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
++ | CFG_CMD_PING \
++ | CFG_CMD_ASKENV \
++ | CFG_CMD_I2C) \
++ & \
++ ~(CFG_CMD_ENV \
++ | CFG_CMD_LOADS))
++#endif
++#else
++#if defined(CONFIG_PCI)
++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
++ | CFG_CMD_PCI \
++ | CFG_CMD_PING \
++ | CFG_CMD_ASKENV \
++ | CFG_CMD_I2C)
++#else
++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
++ | CFG_CMD_PING \
++ | CFG_CMD_ASKENV \
++ | CFG_CMD_I2C )
++#endif
++#endif
++
++#include <cmd_confdefs.h>
++
++#undef CONFIG_WATCHDOG /* watchdog disabled */
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP /* undef to save memory */
++#define CFG_LOAD_ADDR 0x2000000 /* default load address */
++#define CFG_PROMPT "=> " /* Monitor Command Prompt */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
++#else
++ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
++#endif
++
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS 16 /* max number of command args */
++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
++#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
++
++/*
++ * For booting Linux, the board info and command line data
++ * have to be in the first 8 MB of memory, since this is
++ * the maximum mapped by the Linux kernel during initialization.
++ */
++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
++
++/*
++ * Core HID Setup
++ */
++#define CFG_HID0_INIT 0x000000000
++#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
++#define CFG_HID2 HID2_HBE
++
++/*
++ * Cache Config
++ */
++#define CFG_DCACHE_SIZE 16384
++#define CFG_CACHELINE_SIZE 32
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
++#endif
++
++/*
++ * MMU Setup
++ */
++
++/* DDR: cache cacheable */
++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT0L CFG_IBAT0L
++#define CFG_DBAT0U CFG_IBAT0U
++
++/* IMMRBAR & PCI IO: cache-inhibit and guarded */
++#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \
++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
++#define CFG_DBAT1L CFG_IBAT1L
++#define CFG_DBAT1U CFG_IBAT1U
++
++/* BCSR: cache-inhibit and guarded */
++#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \
++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT2L CFG_IBAT2L
++#define CFG_DBAT2U CFG_IBAT2U
++
++/* FLASH: icache cacheable, but dcache-inhibit and guarded */
++#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
++#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \
++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_DBAT3U CFG_IBAT3U
++
++#define CFG_IBAT4L (0)
++#define CFG_IBAT4U (0)
++#define CFG_DBAT4L CFG_IBAT4L
++#define CFG_DBAT4U CFG_IBAT4U
++
++/* Stack in dcache: cacheable, no memory coherence */
++#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
++#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
++#define CFG_DBAT5L CFG_IBAT5L
++#define CFG_DBAT5U CFG_IBAT5U
++
++#ifdef CONFIG_PCI
++/* PCI MEM space: cacheable */
++#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
++#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT6L CFG_IBAT6L
++#define CFG_DBAT6U CFG_IBAT6U
++/* PCI MMIO space: cache-inhibit and guarded */
++#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
++#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
++#define CFG_DBAT7L CFG_IBAT7L
++#define CFG_DBAT7U CFG_IBAT7U
++#else
++#define CFG_IBAT6L (0)
++#define CFG_IBAT6U (0)
++#define CFG_IBAT7L (0)
++#define CFG_IBAT7U (0)
++#define CFG_DBAT6L CFG_IBAT6L
++#define CFG_DBAT6U CFG_IBAT6U
++#define CFG_DBAT7L CFG_IBAT7L
++#define CFG_DBAT7U CFG_IBAT7U
++#endif
++
++/*
++ * Internal Definitions
++ *
++ * Boot Flags
++ */
++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
++#define BOOTFLAG_WARM 0x02 /* Software reboot */
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
++#endif
++
++/*
++ * Environment Configuration
++ */
++
++#define CONFIG_ENV_OVERWRITE
++
++#if defined(CONFIG_UEC_ETH)
++#define CONFIG_ETHADDR 00:04:9f:ef:03:01
++#define CONFIG_HAS_ETH1
++#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02
++#endif
++
++#define CONFIG_BAUDRATE 115200
++
++#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
++
++#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
++#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "netdev=eth0\0" \
++ "consoledev=ttyS0\0" \
++ "ramdiskaddr=1000000\0" \
++ "ramdiskfile=ramfs.83xx\0" \
++ "fdtaddr=400000\0" \
++ "fdtfile=mpc832xemds.dtb\0" \
++ ""
++
++#define CONFIG_NFSBOOTCOMMAND \
++ "setenv bootargs root=/dev/nfs rw " \
++ "nfsroot=$serverip:$rootpath " \
++ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
++ "console=$consoledev,$baudrate $othbootargs;" \
++ "tftp $loadaddr $bootfile;" \
++ "tftp $fdtaddr $fdtfile;" \
++ "bootm $loadaddr - $fdtaddr"
++
++#define CONFIG_RAMBOOTCOMMAND \
++ "setenv bootargs root=/dev/ram rw " \
++ "console=$consoledev,$baudrate $othbootargs;" \
++ "tftp $ramdiskaddr $ramdiskfile;" \
++ "tftp $loadaddr $bootfile;" \
++ "tftp $fdtaddr $fdtfile;" \
++ "bootm $loadaddr $ramdiskaddr $fdtaddr"
++
++
++#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
++
++#endif /* __CONFIG_H */
+diff --git a/include/mpc83xx.h b/include/mpc83xx.h
+index 504b6a9..52e4369 100644
+--- a/include/mpc83xx.h
++++ b/include/mpc83xx.h
+@@ -75,6 +75,15 @@
+ #define SPR_8360E_REV12 0x80480012
+ #define SPR_8360_REV12 0x80490012
+
++#define SPR_8323E_REV10 0x80620010
++#define SPR_8323_REV10 0x80630010
++#define SPR_8321E_REV10 0x80660010
++#define SPR_8321_REV10 0x80670010
++#define SPR_8323E_REV11 0x80620011
++#define SPR_8323_REV11 0x80630011
++#define SPR_8321E_REV11 0x80660011
++#define SPR_8321_REV11 0x80670011
++
+ /* SPCR - System Priority Configuration Register
+ */
+ #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */
+@@ -167,6 +176,14 @@
+ #define SICRH_UC1EOBI 0x00000004
+ #define SICRH_UC2E1OBI 0x00000002
+ #define SICRH_UC2E2OBI 0x00000001
++
++#elif defined(CONFIG_MPC832X)
++/* SICRL bits - MPC832X specific */
++#define SICRL_LDP_LCS_A 0x80000000
++#define SICRL_IRQ_CKS 0x20000000
++#define SICRL_PCI_MSRC 0x10000000
++#define SICRL_URT_CTPR 0x06000000
++#define SICRL_IRQ_CTPR 0x00C00000
+ #endif
+
+ /* SWCRR - System Watchdog Control Register
+@@ -270,7 +287,7 @@
+ #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000
+ #define HRCWL_CORE_TO_CSB_3X1 0x00060000
+
+-#if defined(CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ #define HRCWL_CEVCOD 0x000000C0
+ #define HRCWL_CEVCOD_SHIFT 6
+ #define HRCWL_CE_PLL_VCO_DIV_4 0x00000000
+@@ -718,7 +735,7 @@
+ #define BR_MS_UPMA 0x00000080 /* UPMA */
+ #define BR_MS_UPMB 0x000000A0 /* UPMB */
+ #define BR_MS_UPMC 0x000000C0 /* UPMC */
+-#if defined(CONFIG_MPC8360)
++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ #define BR_ATOM 0x0000000C
+ #define BR_ATOM_SHIFT 2
+ #endif
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-20 01:47:06 +0000