aboutsummaryrefslogtreecommitdiffstats
path: root/conf/machine
AgeCommit message (Collapse)Author
2011-07-05bug: unbreak udev 171 for bug.Denis 'GNUtoo' Carikli
This commit adds support for udev compat for udev 171, and RDEPENDS_${PN} on bug-udev for bug and bug20. The bug machine still uses a 2.6.27 kernel, and the boot was blocked at: Checking for built-in Bluetooth: no Note that this commit doesn't magically fix udev, because the init script activates udev compat only for kernel inferior to 2.6.27 and we have a 2.6.27 A future commit will address that. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-06-24zaurus.inc: remove orphan LZMA_COMPRESSION_LEVELAndrea Adami
* cpio.lzma are built using xz-utils * add -e to achieve a slightly better compression * keep -7 preset to be able to decompress on 32MB devices Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-06-24nokia900.conf: add support for kexecbootDenis 'GNUtoo' Carikli
The nokia bootloader(nolo) expects a zImage, so we produce a kexecboot zImage. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-06-17omap3: bump MACHINE_KERNEL_PRKoen Kooi
2011-06-16mx28evk: set valid consoleAndreas Müller
The initial patch was build tested only because hardware for tests was not available. Christian Borutta reported the following log: INIT: Id "S" respawning too fast: disabled for 5 minutes Signed-off-by: Andreas Mueller <schnitzeltony@gmx.de> Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-16mx28 SOC: set correct addresses for u-bootAndreas Müller
The initial patch was build tested only because a hardware for tests was not available at the time initial patches were sent. The modifications lead to the following boot log (thanks to Christian Borutta for testing): U-Boot 2009.08 (May 09 2011 - 16:42:53) Freescale i.MX28 family CPU: 454 MHz BUS: 151 MHz EMI: 205 MHz GPMI: 24 MHz DRAM: 128 MB MMC: IMX_SSP_MMC: 0, IMX_SSP_MMC: 1 In: serial Out: serial Err: serial Net: got MAC address from IIM: 00:04:9f:01:4d:57 FEC0 Hit any key to stop autoboot: 0 reading uImage 2519812 bytes read Image Name: Angstrom/2.6.35/mx28evk Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2519748 Bytes = 2.4 MB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.35.3 (borutta@debian) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 PREEMPT Thu May 12 09:54:03 CEST 2011 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Freescale MX28EVK board ... Signed-off-by: Andreas Mueller <schnitzeltony@gmx.de> Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-07ti816x machine: Update for latest kernel versionSiddharth Heroor
* In 2.6.37 the console is tied to ttyO2. Signed-off-by: Siddharth Heroor <heroor@ti.com> Signed-off-by: Denys Dmytriyenko <denys@ti.com>
2011-06-07ti816x machine: Fix JFFS Image commandSiddharth Heroor
* Fixes a bug in the command passed for JFFS2 Image creation. Signed-off-by: Siddharth Heroor <heroor@ti.com> Signed-off-by: Denys Dmytriyenko <denys@ti.com>
2011-06-07Add new nexusone machine configurationDenis 'GNUtoo' Carikli
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-06-06h1940: prefer linux 2.6.39, switch to uImagePaul Eggleton
Mainline linux as of 2.6.39 has almost all support pieces integrated for h1940. In addition switch to uImage to allow booting from u-boot (especially as booting directly from HaRET seems to be problematic at the moment.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-06-04linux-nokia900-meego: update with lastest source release from meegoDenis 'GNUtoo' Carikli
Note that the defconfig was updated too. Its size is 1.8M(so it could be flashed as zImage if necessary) The defconfig update fixes many issues such as the headphones amplifier not initializing correctly for instance. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-05-28nokia900: move more kernel drivers that were built in the kernel(=y) to ↵Denis 'GNUtoo' Carikli
modules(=m) * JaMa: minimize defconfig with savedefconfig Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-24bug20.conf: override the omap3 kernel PR and bump PRDenis Carikli
The bug20 uses a different kernel than the one defined in omap3.inc So the PR should be independant of omap3.inc. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Stefan Schmidt <stefan@buglabs.net>
2011-05-21ben-nanonote: don't build linux-kexecboot until kexec is fixed on mipsAndrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-05-17ulibc: bump git to version 71d63ed75648da9b0b71afabb9c60aaad792c55c and add ↵Henning Heinold
some features * enable backtrace support and put libubacktrace into own package, needed by firefox * added one patch from Timo Teräs to implement RTLD_NO, needed by openjdk * added one patch from Timo Teräs implement ORIGIN_PATH, needed by openjdk * remove fts-support.patch, because is applied upstream * bump PR
2011-05-16p2020rdb: Switch to linux-powerpc-fsl for kernelTom Rini
The 'linux' recipe has never been an actual good provider of a kernel for this machine so for now switch to the recipe which does support it. Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-05-16Set defaults to at91bootstrap-3.0 and u-boot-2009.11Ulf Samuelsson
Set the default bootstrap for at91 machines to bootstrap-3.0 Set the default u-boot to 2009.11 Set default UBOOT_MACHINE to at91sam9m10g45ek_sd This is however overridden by UBOOT_MACHINES which will build: * at91sam9m10g45ek_sd * at91sam9m10g45ek_nandflash * at91sam9m10g45ek_dataflash Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
2011-05-16linux-nokia900-meego: remove oss and old alsa apiDenis 'GNUtoo' Carikli
The removal of the oss api is needed: Without the removal some applications will try to use OSS (for instance intone) and will block the sound card for the other applications(for instance fsoaudiod's audio call handler, resulting in no sound during calls) Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-05-15htcdream: drop xf86-input-tslib from XSERVER, it's not used in xorg-xserver-confMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-14mx28evk: Add new machine definitionAndreas Müller
Signed-off-by: Andreas Mueller <schnitzeltony@gmx.de> Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-05-14bug20.conf: switch to the 2.6.35 linaro kernelDenis Carikli
This kenrel supports more features/devices: * wifi power management works * it supports more BMI modules(for instance bugsound, bugsense etc...) Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Stefan Schmidt <stefan@buglabs.net>
2011-05-13warpcomm.conf: Add new machine TK71 Warpcomm (Marvell Kirkwood based).Leon Woestenberg
Machine configuration and 2.6.36 kernel patches. Run-tested with a PCI Express Mini (Graphics) Card in the mini PCIe slot. Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
2011-05-13om-gta0*: drop xf86-input-tslibMartin Jansa
* not compatible with xserver-1.10 ABI * elfe is not compatible with EmulateRightButton option too Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-13om-gta02: autoload also snd-soc-s3c24xx and bump task-base PR to use new ↵Martin Jansa
MACHINE_EXTRA_RRECOMMENDS Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-12om-gta0*: use linux-2.6.37 and autoload snd-soc-wm8753 moduleMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-06linux-nokia900-meego: add few modules to defconfig and reenable CMDLINEMartin Jansa
* be aware that SRCPV sorts still lower because 4dc381db40ecd82cf885515f3733767899948484 changed branch without PE bump and SRCPV started from 0 again.. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-04palmpre: remove unused componentsSimon Busch
* tellbootie: does not work and isn't required for working reboot/shutdown anymore * palmpre-system-deps-native: the required dependencies are now part of the relevant components Signed-off-by: Simon Busch <morphis@gravedo.de>
2011-04-28linux-nokia900-meego: update to last versionDenis 'GNUtoo' Carikli
This version contains a working bq27x00 i2c driver Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-04-27nokia900.conf: autoload isp1704_charger and omap_ssi modulesKlaus Kurzmann
Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
2011-04-27nokia900: change to newer 2.6.37 kernel which supports power managementDenis 'GNUtoo' Carikli
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-04-26mnci: move to nonworking, obsolete mnci-ramses 2.4 kernelAndrea Adami
* machines with 2.4 kernels are not supported Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-04-26geodegx: move to nonworking, obsolete linux-geodegx 2.4 kernelAndrea Adami
* machines with 2.4 kernels only are not supported Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-04-24conf/machine/nonworking: remove .mtn2git_emptyAndrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-04-24wrt54: move machine to nonworking (using 2.4 kernel)Andrea Adami
* we do actually support 2.6 kernels only Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-04-24er0100, mtx-1, mtx-2: move machine to /nonworkingAndrea Adami
* 'kernel24' is still in machine.conf * we support only kernels 2.6 atm Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-04-23hx2000: move to machine/nonworkingAndrea Adami
* unfortunately support for the machine seems dead * linux-rp kernels have been obsoleted * machine needs fresh patches against recent kernels Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-04-15tune-atom.inc: add i686 to PACKAGE_EXTRA_ARCHHenning Heinold
Signed-off-by: Pau Espin Pedrol <pespin.shar@gmail.com> Acked-by: Henning Heinold <h.heinold@tarent.de>
2011-04-07qemux86: Switch to xorg-xserver for X11Tom Rini
Tested with x11-image Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-04-07am45x-evm: Add am45x-evm machine configurationchase maupin
* Added a new machine configuration for the am45x-evm device. * This machine currently mimics the omap4430-panda configuration during the prototyping phase but is expected to change as the hardware and software evolves. * The am45x-evm machine type is used to allow differentiating software components to be build and packaged (i.e. task lists) as well as to account for differences with the omap4430-panda device in the future. Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Acked-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-03-31conf/,gcc-common.inc: Add support for ARM hard float toolchainKhem Raj
Rename ARM_FP_MODE to ARM_FP_ABI Set target fpu to hard for hardfp ARMv7 Use machine override to add base package arch instead of appending to OVERRIDES directly Pass --with-float option to gcc configure taking into account what float ABI is selected through ARM_FP_ABI Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-03-30ti814x: Add new machine definitionsChase Maupin
* Add new am387x-evm machine definition * Add new dm814xx-evm machine definition * Add new c6a814x-evm machine definition * New SOC_FAMILY ti814x available * Based on machine configuration files from Arago contributed by Siddharth Heroor Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Denys Dmytriyenko <denys@ti.com>
2011-03-29zaurus.inc: fix typo ( s/device_table-add/device_table_add/ )Andrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-03-29zaurus-2.6.inc: rename into zaurus.inc.Andrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-03-29zaurus-2.6.inc: include extra device tables (scsi and loop).Andrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-03-28omap4430-panda: Switch panda to use new omap4 include + add new SOC_FAMILYRoger Monk
* Add new omap4.inc * Switch machine config to use new omap4 include Signed-off-by: Roger Monk <r-monk@ti.com> Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-03-27zaurus-2.6.inc: default to standard linux kernel recipe for all devices.Andrea Adami
* minimal/console-image & kernel 2.6.38 tested and booting on all models Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-03-25omap4430-panda: Prefer u-boot-git and remove extra custom x-loadRoger Monk
* Switch to using u-boot-git (instead of u-boot-sakoman) * Remove reference to custom x-load * Remove extra image depends (which will come from common include) Signed-off-by: Roger Monk <r-monk@ti.com> Signed-off-by: Koen Kooi <k-kooi@ti.com>
2011-03-23bug20: add wifi and bluetooth to MACHINE_FEATURESDenis Carikli
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Stefan Schmidt <stefan@buglabs.net>
2011-03-17dm368-evm: Add configuration for DM368 machinechase maupin
* Added the configuration for the dm368-evm machine type. * Updated the sort.sh script * Updated the Linux kernel and u-boot recipes to support this new device. Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-03-13ben-nanonote.conf: define default kernel CMDLINE to be used in boot.cfgAndrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-28 01:18:57 +0000