Age | Commit message (Collapse) | Author |
|
* use 8x16 fonts as other defconfigs
* Deprecated: 2.6.38 is in testing
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* bootlogo should now be shown on collie and poodle
* tosa has height 640! Increase font size to 8x16.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* 4x6 somehow inhibits kernel bootlogo (black screen)
* 8x8 is fine on those devices
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* Let placeholder for the next 2.6.38+2.6.39-rc1.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* 4x6 somehow inhibits kernel bootlogo (black screen)
* 8x8 is fine on those devices
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
tmlind tree hasnt switch to 2.6.38 versioning yet, so this is still
-rc8. Rebased the patches and added one to make SMC instruction compile
and support XM rev C
Signed-off-by: Graeme Gregory <dp@xora.org.uk>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* Added the configuration for the dm368-evm machine type.
* Updated the sort.sh script
* Updated the Linux kernel and u-boot recipes to support this
new device.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
* Uniform other minor settings.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
with the new GNU make.
Signed-off-by: Stanislav Brabec <utx@penguin.cz>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
In most cases we had both ../foopkg/foopkg as the first path and
this simply became foopkg (the second path was already correct for
the default strip level which is why the patch applies normally).
In a few cases the second path was '.' which is valid but not as
clear as 'b' (which is what git shows for example) so update
that while we're at it.
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
* collie and tosa following soon
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* Keep DEFAULT_PREFERENCE = "-1" until we have 2.6.38 as default.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* adding akita c7x0 and poodle
* editing spitz to allow boot from CF/HDD
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Similar patch is on its way to the mainline kernel:
http://thread.gmane.org/gmane.linux.kernel/1111144
Signed-off-by: Steffen Sledz <sledz@dresearch.de>
|
|
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
* CMDLINE_append = " ${CMDLINE_DEBUG} " was not the way
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Pau Espin Pedrol <pespin.shar@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Simon Busch <morphis@gravedo.de>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Mike Westerhof <mike@mwester.net>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Added basic beagle support porting in the two patches that were
obvious to bring in. Updated the omapzoom machines with the same
defconfig while doing this.
Signed-off-by: Graeme Gregory <dp@xora.org.uk>
|
|
Added basic beagle support porting in the two patches that were
obvious to bring in. Updated the omapzoom machines with the same
defconfig while doing this.
Signed-off-by: Graeme Gregory <dp@xora-build.xora.org.uk>
|
|
* We aim to support new mips devices shipping with u-boot
* but we cannot set KERNEL_IMAGETYPE = "uImage" yet.
* This is temporary solution until uImage becomes target for mips
* both in kernel and kexec-tools
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
RD_COMPRESSION, which made 'make oldconfig' to ignore them
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* No need to specify custom cmdline.
* Firmware / 2nd stage bootloader will provide it.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* CMDLINE_BOOL is not enough, mips needs CONFIG_CMDLINE_OVERRIDE=y
* otherwise CMDLINE string is appended and does not replace
* the bootloader's one.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* fix harmless typo...
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
* refine custom mips uboot-mkimage, waiting for uImge target in kernel.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
|
|
These config and patch files are from the Phytec Linux BSP for phyCORE-i.MX35 PD10.1.1.
They were taken from the archive
ftp://ftp.phytec.de/pub/Products/phyCORE-iMX350/Linux/PD10.1.1/OSELAS.BSP-Phytec-phyCORE-i.MX35-PD10.1.1.tar.gz
The patch files are from the folder in this archive
OSELAS.BSP-Phytec-phyCORE-i.MX35-PD10.1.1/configs/phyCORE-i.MX35-2010.08.0/patches/linux-2.6.31.6/generic
The patch files have been shipped for linux-2.6.31.6 and are used here on linux-2.6.31.12. Because it seems to work,
pcm043 is added to linux-2.6.31.bb.
The sequence of the patches for pcm043 in linux-2.6.31.bb is derived from the file
OSELAS.BSP-Phytec-phyCORE-i.MX35-PD10.1.1/configs/phyCORE-i.MX35-2010.08.0/patches/linux-2.6.31.6/generic/series
The defconfig file is the file
OSELAS.BSP-Phytec-phyCORE-i.MX35-PD10.1.1/configs/phyCORE-i.MX35-2010.08.0/kernelconfig
These patch files from the folder
OSELAS.BSP-Phytec-phyCORE-i.MX35-PD10.1.1/configs/phyCORE-i.MX35-2010.08.0/patches/linux-2.6.31.6/generic
are NOT used:
0063-add-generic-platform-bus-based-sja1000-driver.patch
0076-mx3fb-pretty-printing-update.patch
0078-sja1000-driver-Fix-net-device-stats.patch
patch-2.6.31.6-rt19.gz
because they are not referenced by the file
OSELAS.BSP-Phytec-phyCORE-i.MX35-PD10.1.1/configs/phyCORE-i.MX35-2010.08.0/patches/linux-2.6.31.6/generic/series
Signed-off-by: Jan Kobler <eng1@koblersystems.de>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
The new machine pcm043 is the board Phytec phyCORE-i.MX35.
The machine name pcm043 is chosen, because it is already used in the linux kernel
for this board.
BSP is derived from BSP of machine mx31ads.
Linux kernel is based on Phytec Linux BSP for phyCORE-i.MX35 PD 10.1.1
Vendor page: http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-ARM11-i.MX35.html
Tutorial: http://en.gentoo-wiki.com/wiki/Phytec_phyCORE-iMX35/Openembedded
Signed-off-by: Jan Kobler <eng1@koblersystems.de>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|