From 3cb946597ed916b167109b9faecb8c6eb0a695e8 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 20 Nov 2006 11:04:45 +0000 Subject: Convert IPKG_ARCHS -> PACKAGE_ARCHS, IPKG_EXTRA_ARCHS -> PACKAGE_EXTRA_ARCHS in preparation for deb handling --- conf/bitbake.conf | 2 +- conf/distro/openmn.conf | 2 +- conf/distro/unslung.conf | 2 +- conf/documentation.conf | 4 ++-- conf/machine/a780.conf | 2 +- conf/machine/akita.conf | 2 +- conf/machine/blueangel.conf | 2 +- conf/machine/colinux.conf | 2 +- conf/machine/compulab-pxa270.conf | 2 +- conf/machine/db1200.conf | 2 +- conf/machine/devkitidp-pxa255.conf | 2 +- conf/machine/dht-walnut.conf | 2 +- conf/machine/efika.conf | 2 +- conf/machine/ep93xx.conf | 2 +- conf/machine/epia.conf | 2 +- conf/machine/guinness.conf | 2 +- conf/machine/h1910.conf | 2 +- conf/machine/h1940.conf | 2 +- conf/machine/h2200.conf | 2 +- conf/machine/h3600.conf | 2 +- conf/machine/h3900.conf | 2 +- conf/machine/h4000.conf | 2 +- conf/machine/h5xxx.conf | 2 +- conf/machine/h6300.conf | 2 +- conf/machine/htcuniversal.conf | 2 +- conf/machine/hx2000.conf | 2 +- conf/machine/hx4700.conf | 2 +- conf/machine/include/ixp4xx.conf | 8 ++++---- conf/machine/include/tune-iwmmxt.conf | 2 +- conf/machine/include/zaurus-clamshell.conf | 2 +- conf/machine/ipaq-pxa270.conf | 2 +- conf/machine/ixp4xx.conf | 2 +- conf/machine/lite5200.conf | 2 +- conf/machine/logicpd-pxa270.conf | 2 +- conf/machine/magician.conf | 2 +- conf/machine/mainstone.conf | 2 +- conf/machine/mtx-1.conf | 2 +- conf/machine/mtx-2.conf | 2 +- conf/machine/mtx-3.conf | 2 +- conf/machine/mx31ads.conf | 2 +- conf/machine/navman-icn330.conf | 2 +- conf/machine/netbook-pro.conf | 2 +- conf/machine/nokia770.conf | 2 +- conf/machine/omap1510inn.conf | 2 +- conf/machine/omap1610h2.conf | 2 +- conf/machine/omap1710h3.conf | 2 +- conf/machine/omap2420h4.conf | 2 +- conf/machine/omap5912osk.conf | 2 +- conf/machine/palmld.conf | 2 +- conf/machine/poodle.conf | 2 +- conf/machine/qemuarm.conf | 2 +- conf/machine/rb500.conf | 2 +- conf/machine/smdk2440.conf | 2 +- conf/machine/spitz.conf | 2 +- conf/machine/tosa.conf | 2 +- conf/machine/triton.conf | 2 +- conf/machine/wrap.conf | 2 +- conf/machine/x86.conf | 2 +- 58 files changed, 62 insertions(+), 62 deletions(-) (limited to 'conf') diff --git a/conf/bitbake.conf b/conf/bitbake.conf index 7da0a9a28d..b2d7e2b875 100644 --- a/conf/bitbake.conf +++ b/conf/bitbake.conf @@ -57,7 +57,7 @@ TARGET_CC_ARCH = "" PACKAGE_ARCH = "${HOST_ARCH}" MACHINE_ARCH = "${@[bb.data.getVar('HOST_ARCH', d, 1), bb.data.getVar('MACHINE', d, 1)][bool(bb.data.getVar('MACHINE', d, 1))]}" -IPKG_ARCHS = "all any noarch ${TARGET_ARCH} ${IPKG_EXTRA_ARCHS} ${MACHINE}" +PACKAGE_ARCHS = "all any noarch ${TARGET_ARCH} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}" ################################################################## # Date/time variables. diff --git a/conf/distro/openmn.conf b/conf/distro/openmn.conf index 8118acb1da..9de6c7d9e1 100644 --- a/conf/distro/openmn.conf +++ b/conf/distro/openmn.conf @@ -12,7 +12,7 @@ TARGET_OS = "linux" INHERIT += "package_ipk" INHERIT += "debian" -IPKG_EXTRA_ARCHS = "armv5te openmn" +PACKAGE_EXTRA_ARCHS = "armv5te openmn" FEED_URIS = "mnci54##http://www.mn-solutions.de/feed/mnci54/base" diff --git a/conf/distro/unslung.conf b/conf/distro/unslung.conf index 541eaef852..892c589389 100644 --- a/conf/distro/unslung.conf +++ b/conf/distro/unslung.conf @@ -26,7 +26,7 @@ THUMB_INTERWORK = "no" # to armeb - this makes this stuff independent of changes in machine/nslu2.conf TARGET_ARCH = "armeb" PACKAGE_ARCH = "${TARGET_ARCH}" -# IPKG_EXTRA_ARCHS has the full list of supported architectures (from nslu2.conf) +# PACKAGE_EXTRA_ARCHS has the full list of supported architectures (from nslu2.conf) # match the optimisation settings to that which has traditionally been used # in unslung diff --git a/conf/documentation.conf b/conf/documentation.conf index 9996b27d48..62622ea255 100644 --- a/conf/documentation.conf +++ b/conf/documentation.conf @@ -38,8 +38,8 @@ PACKAGE_ARCH[doc] = 'The architecture needed for using a resulting package. If y machine dependant configuration options in your bitbake file add a \ PACKAGE_ARCH = "${MACHINE_ARCH}" to the file.' -IPKG_ARCHS[doc] = 'A list of architectures compatible with the given target in order of priority' -IPKG_EXTRA_ARCHS[doc] = 'Set this variable to add extra architectures to the list of supported architectures' +PACKAGE_ARCHS[doc] = 'A list of architectures compatible with the given target in order of priority' +PACKAGE_EXTRA_ARCHS[doc] = 'Set this variable to add extra architectures to the list of supported architectures' DATE[doc] = "The date the build was started Ymd" TIME[doc] = "The time the build was started HMS" diff --git a/conf/machine/a780.conf b/conf/machine/a780.conf index 6b6e5a8ea9..a62fafbc39 100644 --- a/conf/machine/a780.conf +++ b/conf/machine/a780.conf @@ -5,7 +5,7 @@ require conf/machine/include/motorola-ezx.conf TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv5te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" diff --git a/conf/machine/akita.conf b/conf/machine/akita.conf index e14efa76a0..27695be4bb 100644 --- a/conf/machine/akita.conf +++ b/conf/machine/akita.conf @@ -5,7 +5,7 @@ include conf/machine/include/zaurus-clamshell.conf include conf/machine/include/zaurus-2.6.conf -IPKG_EXTRA_ARCHS += "iwmmxt" +PACKAGE_EXTRA_ARCHS += "iwmmxt" IMAGE_FSTYPES ?= "jffs2" ROOT_FLASH_SIZE = "58" diff --git a/conf/machine/blueangel.conf b/conf/machine/blueangel.conf index 979c002d11..dd079c244b 100644 --- a/conf/machine/blueangel.conf +++ b/conf/machine/blueangel.conf @@ -7,7 +7,7 @@ KERNEL ?= "kernel26" OVERRIDES =. "${KERNEL}:" TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel_kernel26 = "xanadux-ba-2.6" PREFERRED_PROVIDER_virtual/kernel = "xanadux-ba-2.6" diff --git a/conf/machine/colinux.conf b/conf/machine/colinux.conf index 556944ef8e..31e55e924f 100644 --- a/conf/machine/colinux.conf +++ b/conf/machine/colinux.conf @@ -3,6 +3,6 @@ #@DESCRIPTION: Machine configuration for Cooperative Linux running on an x86 compatible PC TARGET_ARCH = "i686" -IPKG_EXTRA_ARCHS = "i386 x86" +PACKAGE_EXTRA_ARCHS = "i386 x86" PREFERRED_PROVIDER_virtual/kernel = "linux-colinux" BOOTSTRAP_EXTRA_RDEPENDS = "kernel kernel-modules" diff --git a/conf/machine/compulab-pxa270.conf b/conf/machine/compulab-pxa270.conf index 38bc900050..b49bf48d07 100644 --- a/conf/machine/compulab-pxa270.conf +++ b/conf/machine/compulab-pxa270.conf @@ -7,7 +7,7 @@ PREFERRED_VERSION_logicpd-pxa270 = "2.6.17" GUI_MACHINE_CLASS = "bigscreen" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}" -IPKG_EXTRA_ARCHS = "armv4 armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv5te" include conf/machine/include/tune-xscale.conf diff --git a/conf/machine/db1200.conf b/conf/machine/db1200.conf index d46636cccf..efa45f6a2a 100644 --- a/conf/machine/db1200.conf +++ b/conf/machine/db1200.conf @@ -1,7 +1,7 @@ # Alchemy db1200 TARGET_ARCH = "mipsel" -IPKG_ARCHS = "${TARGET_ARCH} ${MACHINE}" +PACKAGE_ARCHS = "${TARGET_ARCH} ${MACHINE}" PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}depmod:module-init-tools-cross" diff --git a/conf/machine/devkitidp-pxa255.conf b/conf/machine/devkitidp-pxa255.conf index 6bc632dbdd..7d19d02439 100644 --- a/conf/machine/devkitidp-pxa255.conf +++ b/conf/machine/devkitidp-pxa255.conf @@ -5,7 +5,7 @@ TARGET_ARCH = "arm" GUI_MACHINE_CLASS = "bigscreen" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" PREFERRED_PROVIDER_virtual/bootloader = "uboot-${MACHINE}" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel" diff --git a/conf/machine/dht-walnut.conf b/conf/machine/dht-walnut.conf index 68b754f2d3..eae1a3433d 100644 --- a/conf/machine/dht-walnut.conf +++ b/conf/machine/dht-walnut.conf @@ -1,5 +1,5 @@ TARGET_ARCH = "powerpc" -IPKG_ARCHS = "all powerpc ${MACHINE}" +PACKAGE_ARCHS = "all powerpc ${MACHINE}" PREFERRED_PROVIDER_virtual/kernel = "linux-dht-walnut" diff --git a/conf/machine/efika.conf b/conf/machine/efika.conf index 2faf6ebed9..33fac1ae6a 100644 --- a/conf/machine/efika.conf +++ b/conf/machine/efika.conf @@ -4,7 +4,7 @@ TARGET_ARCH = "powerpc" -IPKG_EXTRA_ARCHS = "ppc" +PACKAGE_EXTRA_ARCHS = "ppc" PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}" diff --git a/conf/machine/ep93xx.conf b/conf/machine/ep93xx.conf index 82905dd089..67efb585c1 100644 --- a/conf/machine/ep93xx.conf +++ b/conf/machine/ep93xx.conf @@ -4,7 +4,7 @@ TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4t" +PACKAGE_EXTRA_ARCHS = "armv4t" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel" diff --git a/conf/machine/epia.conf b/conf/machine/epia.conf index e82da27574..08f12a0ac6 100644 --- a/conf/machine/epia.conf +++ b/conf/machine/epia.conf @@ -7,7 +7,7 @@ udevdir = "/dev" OLDEST_KERNEL = "2.6.5" GLIBC_ADDONS = "nptl" GLIBC_EXTRA_OECONF = "--with-tls" -IPKG_EXTRA_ARCHS = "i386" +PACKAGE_EXTRA_ARCHS = "i386" include conf/machine/include/tune-c3.conf diff --git a/conf/machine/guinness.conf b/conf/machine/guinness.conf index 4890f3cecd..bcbd6e8023 100644 --- a/conf/machine/guinness.conf +++ b/conf/machine/guinness.conf @@ -5,7 +5,7 @@ # i386 doesn't work with NTPL, see http://ecos.sourceware.org/ml/libc-ports/2006-03/msg00030.html TARGET_ARCH = "i686" -IPKG_EXTRA_ARCHS = "x86 i386 i486 i586" +PACKAGE_EXTRA_ARCHS = "x86 i386 i486 i586" PREFERRED_PROVIDER_virtual/kernel = "linux-x86" # todo: convert to task-base diff --git a/conf/machine/h1910.conf b/conf/machine/h1910.conf index a2c4a9c10e..c8b2fad2fd 100644 --- a/conf/machine/h1910.conf +++ b/conf/machine/h1910.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/h1940.conf b/conf/machine/h1940.conf index 1ea4a68639..08104624ca 100644 --- a/conf/machine/h1940.conf +++ b/conf/machine/h1940.conf @@ -2,7 +2,7 @@ #@NAME: h1940 #@DESCRIPTION: Machine configuration for the HP iPAQ h1930 and h1940 -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" TARGET_ARCH = "arm" PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel = "linux-h1940" diff --git a/conf/machine/h2200.conf b/conf/machine/h2200.conf index 8a6cee312c..91c733b191 100644 --- a/conf/machine/h2200.conf +++ b/conf/machine/h2200.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" #Compile with armv5te optimizations, incompatible with armv4(t) cpus require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/h3600.conf b/conf/machine/h3600.conf index 14a9bb6ba5..104d518ad3 100644 --- a/conf/machine/h3600.conf +++ b/conf/machine/h3600.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "ipaqsa" +PACKAGE_EXTRA_ARCHS = "ipaqsa" require conf/machine/include/tune-strongarm.conf diff --git a/conf/machine/h3900.conf b/conf/machine/h3900.conf index 61024584b5..f00dc9eb96 100644 --- a/conf/machine/h3900.conf +++ b/conf/machine/h3900.conf @@ -10,7 +10,7 @@ INHERIT += "linux-kernel-base" OVERRIDES =. "${KERNEL}:" TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel_kernel24 = "handhelds-pxa" PREFERRED_PROVIDER_virtual/kernel_kernel26 = "linux-handhelds-2.6" diff --git a/conf/machine/h4000.conf b/conf/machine/h4000.conf index f2ecbc5883..4eef599aaf 100644 --- a/conf/machine/h4000.conf +++ b/conf/machine/h4000.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/h5xxx.conf b/conf/machine/h5xxx.conf index 941d08c013..5aac579e91 100644 --- a/conf/machine/h5xxx.conf +++ b/conf/machine/h5xxx.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ipaqpxa" require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/h6300.conf b/conf/machine/h6300.conf index 8cce5f61b9..f793b49c70 100644 --- a/conf/machine/h6300.conf +++ b/conf/machine/h6300.conf @@ -7,7 +7,7 @@ # TARGET_ARCH = "arm" PACKAGE_ARCH = "arm" -IPKG_EXTRA_ARCHS = "arm armv4 armv4t" +PACKAGE_EXTRA_ARCHS = "arm armv4 armv4t" #Use OMAP 1510 cpu specifig arm9tdmi options for gcc require conf/machine/include/tune-arm9tdmi.conf diff --git a/conf/machine/htcuniversal.conf b/conf/machine/htcuniversal.conf index 4366cb16df..efb92518a5 100644 --- a/conf/machine/htcuniversal.conf +++ b/conf/machine/htcuniversal.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "ipaqpxa armv4t armv5te iwmmxt" +PACKAGE_EXTRA_ARCHS = "ipaqpxa armv4t armv5te iwmmxt" # Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm. require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/hx2000.conf b/conf/machine/hx2000.conf index da2e466425..25f093e1b8 100644 --- a/conf/machine/hx2000.conf +++ b/conf/machine/hx2000.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the hx2000 iPAQs with a pxa27x CPU TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa ipaq-pxa270" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa ipaq-pxa270" PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" diff --git a/conf/machine/hx4700.conf b/conf/machine/hx4700.conf index d43d16fb46..3a94220968 100644 --- a/conf/machine/hx4700.conf +++ b/conf/machine/hx4700.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa ipaq-pxa270" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa ipaq-pxa270" # Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm. require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/include/ixp4xx.conf b/conf/machine/include/ixp4xx.conf index 541d350f21..190ebe1c8c 100644 --- a/conf/machine/include/ixp4xx.conf +++ b/conf/machine/include/ixp4xx.conf @@ -111,7 +111,7 @@ TARGET_PACKAGE_ARCH = "${TARGET_PACKAGE_ARCH_BASE}${BYTE_SEX_CHAR}" # because everything built here is no more specific than that. MACHINE_ARCH = "ixp4xx${ARCH_BYTE_SEX}" -# IPKG_EXTRA_ARCHS +# PACKAGE_EXTRA_ARCHS # The full list of package architectures which should run on the system. # This takes into account both the board level issues and the INPUTS set # by the distro. The arm list is derived from the architecture settings @@ -126,12 +126,12 @@ THUMB_ARCHITECTURES = "thumbe${BYTE_SEX_CHAR} thumbv4t${BYTE_SEX_CHAR} thumbv5t$ # NOTE: this list contains just the things which rootfs_ipk.bbclass does # not add, rootfs_ipk.bbclass evaluates: # -# ipkgarchs="all any noarch ${TARGET_ARCH} ${IPKG_EXTRA_ARCHS} ${MACHINE}" +# ipkgarchs="all any noarch ${TARGET_ARCH} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}" # # This is a priority ordered list - most desireable architecture at the end, # so put _ARCHITECTURES at the end and, if # THUMB_INTERWORK precede this with the other architectures. -IPKG_EXTRA_ARCHS = "ixp4xx ${MACHINE} \ +PACKAGE_EXTRA_ARCHS = "ixp4xx ${MACHINE} \ ${@(lambda arch_thumb, arch_arm, is_arm, interwork: \ (interwork and (is_arm and arch_thumb or arch_arm) + ' ' or '') \ + '${TARGET_ARCH} ' + (is_arm and arch_arm or arch_thumb)) \ @@ -146,7 +146,7 @@ IPKG_EXTRA_ARCHS = "ixp4xx ${MACHINE} \ # the removal of the raw "${MACHINE}" from the end of the list. ${MACHINE} and # ixp4xx are included at the start (lower priority) as the non-byte-sex specific # versions. -IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${IPKG_EXTRA_ARCHS}" +IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${PACKAGE_EXTRA_ARCHS}" #------------------------------------------------------------------------------- # Board defaults diff --git a/conf/machine/include/tune-iwmmxt.conf b/conf/machine/include/tune-iwmmxt.conf index 990aee54bc..8376faca74 100644 --- a/conf/machine/include/tune-iwmmxt.conf +++ b/conf/machine/include/tune-iwmmxt.conf @@ -1,6 +1,6 @@ # Configurations for the Intel PXA27x Appications Processor Family. # Please use tune-xscale for PXA255/PXA26x based processors. -IPKG_EXTRA_ARCHS += "iwmmxt" TARGET_CC_ARCH = "-march=iwmmxt -mcpu=iwmmxt -mtune=iwmmxt" PACKAGE_ARCH = "iwmmxt" +PACKAGE_EXTRA_ARCHS += "iwmmxt" diff --git a/conf/machine/include/zaurus-clamshell.conf b/conf/machine/include/zaurus-clamshell.conf index e600a4926d..3c02f7bfd9 100644 --- a/conf/machine/include/zaurus-clamshell.conf +++ b/conf/machine/include/zaurus-clamshell.conf @@ -1,5 +1,5 @@ TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" diff --git a/conf/machine/ipaq-pxa270.conf b/conf/machine/ipaq-pxa270.conf index b3db5c8268..afc1318f40 100644 --- a/conf/machine/ipaq-pxa270.conf +++ b/conf/machine/ipaq-pxa270.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the iPAQ with a pxa27x CPU devices TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa hx4700" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa hx4700" #use this for a hx47xx ipaq PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6" diff --git a/conf/machine/ixp4xx.conf b/conf/machine/ixp4xx.conf index c3e56067cd..dc174b8e35 100644 --- a/conf/machine/ixp4xx.conf +++ b/conf/machine/ixp4xx.conf @@ -6,4 +6,4 @@ MACHINE_FEATURES = "kernel26 usbhost ext2" include conf/machine/include/ixp4xx.conf -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ixp4xx${ARCH_BYTE_SEX}" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ixp4xx${ARCH_BYTE_SEX}" diff --git a/conf/machine/lite5200.conf b/conf/machine/lite5200.conf index cd943f7e65..3cbc44485d 100644 --- a/conf/machine/lite5200.conf +++ b/conf/machine/lite5200.conf @@ -1,5 +1,5 @@ TARGET_ARCH = "powerpc" -IPKG_EXTRA_ARCHS = "ppc" +PACKAGE_EXTRA_ARCHS = "ppc" UBOOT_MACHINE = "Lite5200" SERIAL_CONSOLE="38400 ttyS0" diff --git a/conf/machine/logicpd-pxa270.conf b/conf/machine/logicpd-pxa270.conf index efb19aea93..dc41e7c2fd 100644 --- a/conf/machine/logicpd-pxa270.conf +++ b/conf/machine/logicpd-pxa270.conf @@ -7,7 +7,7 @@ PREFERRED_VERSION_logicpd-pxa270 = "2.6.17-rc5" GUI_MACHINE_CLASS = "smallscreen" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}" -IPKG_EXTRA_ARCHS = "armv4 armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv5te" include conf/machine/include/tune-xscale.conf diff --git a/conf/machine/magician.conf b/conf/machine/magician.conf index d2cc9b1f49..e5138be1c8 100644 --- a/conf/machine/magician.conf +++ b/conf/machine/magician.conf @@ -6,7 +6,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa ipaq-pxa270" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt ipaqpxa ipaq-pxa270" # Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm. require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/mainstone.conf b/conf/machine/mainstone.conf index 72a305df38..914022c7bc 100644 --- a/conf/machine/mainstone.conf +++ b/conf/machine/mainstone.conf @@ -5,7 +5,7 @@ TARGET_ARCH = "arm" GUI_MACHINE_CLASS = "smallscreen" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel" diff --git a/conf/machine/mtx-1.conf b/conf/machine/mtx-1.conf index 73500b501d..33a69f45b3 100644 --- a/conf/machine/mtx-1.conf +++ b/conf/machine/mtx-1.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the mtx-1 (aka MeshCube) TARGET_ARCH = "mipsel" -IPKG_ARCHS = "all mipsel ${MACHINE}" +PACKAGE_ARCHS = "all mipsel ${MACHINE}" PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-1" diff --git a/conf/machine/mtx-2.conf b/conf/machine/mtx-2.conf index d3e15afc9e..438c1fed79 100644 --- a/conf/machine/mtx-2.conf +++ b/conf/machine/mtx-2.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the mtx-2 (aka SurfBox 2nd generation) TARGET_ARCH = "mipsel" -IPKG_ARCHS = "all mipsel ${MACHINE}" +PACKAGE_ARCHS = "all mipsel ${MACHINE}" PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-2" diff --git a/conf/machine/mtx-3.conf b/conf/machine/mtx-3.conf index bdd39ab57f..dd848ea021 100644 --- a/conf/machine/mtx-3.conf +++ b/conf/machine/mtx-3.conf @@ -9,7 +9,7 @@ # For compiling the kernel, ARCH will be derived form it by kernel-arch.bbclass TARGET_ARCH = "arm" -IPKG_ARCHS = "all arm ${MACHINE}" +PACKAGE_ARCHS = "all arm ${MACHINE}" PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-3" diff --git a/conf/machine/mx31ads.conf b/conf/machine/mx31ads.conf index 4b3fff7061..33456a4b03 100644 --- a/conf/machine/mx31ads.conf +++ b/conf/machine/mx31ads.conf @@ -8,7 +8,7 @@ TARGET_FPU_arm = "hard" MACHINE_FEATURES = "kernel26 apm alsa ext2 pcmcia usbhost usbgadget" GUI_MACHINE_CLASS = "smallscreen" -IPKG_EXTRA_ARCHS = "arm armv4t armv5te armv6" +PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te armv6" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel" diff --git a/conf/machine/navman-icn330.conf b/conf/machine/navman-icn330.conf index 79bafd1230..c5fbdf2e97 100644 --- a/conf/machine/navman-icn330.conf +++ b/conf/machine/navman-icn330.conf @@ -8,7 +8,7 @@ # Hardware-based properties # TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" #Compile with armv5te optimizations, incompatible with armv4(t) cpus require conf/machine/include/tune-xscale.conf diff --git a/conf/machine/netbook-pro.conf b/conf/machine/netbook-pro.conf index 095cd95d31..1048cb1d6c 100755 --- a/conf/machine/netbook-pro.conf +++ b/conf/machine/netbook-pro.conf @@ -5,7 +5,7 @@ INHERIT += "linux-kernel-base" TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "arm armv4 armv4t armv5te" +PACKAGE_EXTRA_ARCHS = "arm armv4 armv4t armv5te" PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel" diff --git a/conf/machine/nokia770.conf b/conf/machine/nokia770.conf index aa57bb4563..6bde574d02 100644 --- a/conf/machine/nokia770.conf +++ b/conf/machine/nokia770.conf @@ -2,7 +2,7 @@ #@NAME: Nokia 770 internet tablet #@DESCRIPTION: Machine configuration for the Nokia 770, an omap 1710 based tablet TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv4t armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te" PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive-omap" PREFERRED_PROVIDER_virtual/bootloader = "" diff --git a/conf/machine/omap1510inn.conf b/conf/machine/omap1510inn.conf index bd367d43a0..51d5b12f9d 100644 --- a/conf/machine/omap1510inn.conf +++ b/conf/machine/omap1510inn.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the OMAP H2 development board with a 1610 processor TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6" diff --git a/conf/machine/omap1610h2.conf b/conf/machine/omap1610h2.conf index bd367d43a0..51d5b12f9d 100644 --- a/conf/machine/omap1610h2.conf +++ b/conf/machine/omap1610h2.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the OMAP H2 development board with a 1610 processor TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6" diff --git a/conf/machine/omap1710h3.conf b/conf/machine/omap1710h3.conf index bd367d43a0..51d5b12f9d 100644 --- a/conf/machine/omap1710h3.conf +++ b/conf/machine/omap1710h3.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the OMAP H2 development board with a 1610 processor TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6" diff --git a/conf/machine/omap2420h4.conf b/conf/machine/omap2420h4.conf index 514069264e..70a3082956 100644 --- a/conf/machine/omap2420h4.conf +++ b/conf/machine/omap2420h4.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the OMAP H2 development board with a 1610 processor TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv5te armv6te" +PACKAGE_EXTRA_ARCHS = "armv5te armv6te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6" diff --git a/conf/machine/omap5912osk.conf b/conf/machine/omap5912osk.conf index c6bb20948a..f8a3472f78 100644 --- a/conf/machine/omap5912osk.conf +++ b/conf/machine/omap5912osk.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the OMAP Starter Kit with a 5912 processor TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" HOTPLUG = "udev" diff --git a/conf/machine/palmld.conf b/conf/machine/palmld.conf index 35a31aa00b..ef8f4ca57b 100644 --- a/conf/machine/palmld.conf +++ b/conf/machine/palmld.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the Palm LifeDrive TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "arm armv4t armv5te" +PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te" PREFERRED_PROVIDER_virtual/kernel = "hackndev-2.6trunk" diff --git a/conf/machine/poodle.conf b/conf/machine/poodle.conf index fc8fb718f2..c904372535 100644 --- a/conf/machine/poodle.conf +++ b/conf/machine/poodle.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the PXA250 based Sharp Zaurus SL-B500 and SHarp Zaurus SL-5600 devices TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv5te" MACHINE_KERNEL_VERSION ?= "2.4" include conf/machine/include/poodle-${MACHINE_KERNEL_VERSION}.conf diff --git a/conf/machine/qemuarm.conf b/conf/machine/qemuarm.conf index c32353f01e..d67acac50f 100644 --- a/conf/machine/qemuarm.conf +++ b/conf/machine/qemuarm.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for running an ARM system under qemu emulation TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv5te" require conf/machine/include/qemu.conf require conf/machine/include/tune-arm926ejs.conf diff --git a/conf/machine/rb500.conf b/conf/machine/rb500.conf index aec2a8f726..ab669aee49 100644 --- a/conf/machine/rb500.conf +++ b/conf/machine/rb500.conf @@ -4,5 +4,5 @@ TARGET_ARCH = "mipsel" TARGET_CC_ARCH = "-Os -mips2" -IPKG_ARCHS = "all mipsel ${MACHINE}" +PACKAGE_ARCHS = "all mipsel ${MACHINE}" PREFERRED_PROVIDER_virtual/kernel = "linux-rb500" diff --git a/conf/machine/smdk2440.conf b/conf/machine/smdk2440.conf index 04694cd3d3..c054cf6195 100644 --- a/conf/machine/smdk2440.conf +++ b/conf/machine/smdk2440.conf @@ -4,7 +4,7 @@ TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4t" +PACKAGE_EXTRA_ARCHS = "armv4t" PREFERRED_PROVIDER_virtual/kernel = "linux-smdk2440" diff --git a/conf/machine/spitz.conf b/conf/machine/spitz.conf index 5434efbaf6..2c4e10935e 100644 --- a/conf/machine/spitz.conf +++ b/conf/machine/spitz.conf @@ -7,7 +7,7 @@ include conf/machine/include/zaurus-2.6.conf PIVOTBOOT_EXTRA_RDEPENDS += "pivotinit ${PCMCIA_MANAGER}" -IPKG_EXTRA_ARCHS += "iwmmxt" +PACKAGE_EXTRA_ARCHS += "iwmmxt" IMAGE_FSTYPES ?= "tar.gz" ROOT_FLASH_SIZE = "100" diff --git a/conf/machine/tosa.conf b/conf/machine/tosa.conf index e7f2aa204a..1d7b04e24e 100644 --- a/conf/machine/tosa.conf +++ b/conf/machine/tosa.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the PXA255 based Sharp Zaurus SL-6000 device TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv4 armv5te" +PACKAGE_EXTRA_ARCHS = "armv4 armv5te" MACHINE_KERNEL_VERSION ?= "2.6" include conf/machine/include/tosa-${MACHINE_KERNEL_VERSION}.conf diff --git a/conf/machine/triton.conf b/conf/machine/triton.conf index 671def34c3..685dcd91fb 100644 --- a/conf/machine/triton.conf +++ b/conf/machine/triton.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the XScale based triton boards from KaRo Electronics TARGET_ARCH = "arm" -IPKG_EXTRA_ARCHS = "armv5te" +PACKAGE_EXTRA_ARCHS = "armv5te" PREFERRED_PROVIDER_virtual/kernel = "triton-kernel" BOOTSTRAP_EXTRA_RDEPENDS = "virtual/kernel" diff --git a/conf/machine/wrap.conf b/conf/machine/wrap.conf index 1073259e7a..592be8dd3c 100644 --- a/conf/machine/wrap.conf +++ b/conf/machine/wrap.conf @@ -3,7 +3,7 @@ #@DESCRIPTION: Machine configuration for the PC Engines WRAP (Wireless Router Application Platform) boards. TARGET_ARCH = "i486" -IPKG_EXTRA_ARCHS = "i386" +PACKAGE_EXTRA_ARCHS = "i386" PREFERRED_PROVIDER_virtual/kernel = "linux-wrap-geode" PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross" diff --git a/conf/machine/x86.conf b/conf/machine/x86.conf index 0953f6d041..b2147f2c0d 100644 --- a/conf/machine/x86.conf +++ b/conf/machine/x86.conf @@ -5,7 +5,7 @@ # i386 doesn't work with NTPL, see http://ecos.sourceware.org/ml/libc-ports/2006-03/msg00030.html TARGET_ARCH = "i486" # TARGET_VENDOR = "-oe" -IPKG_EXTRA_ARCHS = "x86" +PACKAGE_EXTRA_ARCHS = "x86" PREFERRED_PROVIDER_virtual/kernel = "linux-x86" # todo: convert to task-base BOOTSTRAP_EXTRA_RDEPENDS = "kernel pciutils udev kernel-modules" -- cgit 1.2.3-korg