From 72fed19769b30515c18636acf30426b5d834fcaf Mon Sep 17 00:00:00 2001
From: Leon Woestenberg <leon@sidebranch.com>
Date: Sat, 4 Sep 2010 20:30:01 +0200
Subject: Added Freescale P1020RDB machine and linux-powerpc-fsl-2.6.35.

Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
---
 conf/distro/include/angstrom-eglibc.inc |  7 ++++---
 conf/machine/p1020rdb.conf              | 30 ++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 3 deletions(-)
 create mode 100644 conf/machine/p1020rdb.conf

(limited to 'conf')

diff --git a/conf/distro/include/angstrom-eglibc.inc b/conf/distro/include/angstrom-eglibc.inc
index 6c504b4c82..f38837d12b 100644
--- a/conf/distro/include/angstrom-eglibc.inc
+++ b/conf/distro/include/angstrom-eglibc.inc
@@ -5,10 +5,11 @@ ANGSTROM_BLACKLIST_pn-libiconv = "the glibc builtin iconv replacement is used"
 
 TARGET_OS = "linux"
 
-TARGET_OS .= "${@['','-gnueabi'][bb.data.getVar('TARGET_ARCH',d,1) in ['arm', 'armeb']]}"
-TARGET_OS .= "${@['','-gnuspe'][bb.data.getVar('TARGET_ARCH',d,1) in ['ppc', 'powerpc'] and bb.data.getVar('MACHINE',d) in ['calamari']]}"
+# sane-toolchain.inc has this, and explains the GNU and ABI suffices:
+#TARGET_OS = "${@compute_os_portion_of_target_triplet(d)}"
 
-#TARGET_OS = "linux-gnuspe"
+TARGET_OS .= "${@['','-gnueabi'][bb.data.getVar('TARGET_ARCH',d,1) in ['arm', 'armeb']]}"
+TARGET_OS .= "${@['','-gnuspe'][bb.data.getVar('TARGET_ARCH',d,1) in ['ppc', 'powerpc'] and bb.data.getVar('MACHINE',d) in ['calamari','p1020rdb','p2020rdb']]}"
 
 # perl has some problems, see http://bugs.openembedded.net/show_bug.cgi?id=1616
 # [23:00] oxo: glibc (any version) on sparc does not like (repeat me) "-Os"
diff --git a/conf/machine/p1020rdb.conf b/conf/machine/p1020rdb.conf
new file mode 100644
index 0000000000..1e9c7032e9
--- /dev/null
+++ b/conf/machine/p1020rdb.conf
@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@Name: Freescale P1020RDB
+#@DESCRIPTION: Machine configuration for the Freescale P1020RDB Reference Design Board
+
+# Development board with a PowerPC SoC with MMU/FPU and PCI, PCI Express, SATA, etc.
+
+TARGET_ARCH = "powerpc"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux"
+
+MACHINE_FEATURES = "kernel26 usbhost pci ext2 uboot"
+
+KERNEL_IMAGETYPE = "uImage"
+
+PREFERRED_VERSION_u-boot ?= "git"
+UBOOT_MACHINE = "P1020RDB_config"
+UBOOT_ENTRYPOINT = "0"
+UBOOT_LOADADDRESS = "0"
+
+# rootfs on NAND flash -- possibly incorrect, not tested yet, for this machine
+EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x4000 --no-cleanmarkers"
+
+#don't try to access tty1
+USE_VT = "0"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+#tune for the e500v2 core
+require conf/machine/include/tune-ppce500v2.inc
+
-- 
cgit 1.2.3-korg