From 43649c644a8ecf2ba6035ce8b0ffd44948497aac Mon Sep 17 00:00:00 2001 From: Holger Hans Peter Freyther Date: Tue, 11 Aug 2009 12:59:29 +0200 Subject: usermanual: Improve consistency in displaying shell commands Use $ NAME for all shell commands on the host throughout the docbook. $ was picked over the other three candidates due being the oldest one we have used. --- docs/usermanual/chapters/common_use_cases.xml | 28 ++++++------- docs/usermanual/chapters/getting_oe.xml | 34 ++++++++-------- docs/usermanual/chapters/recipes.xml | 56 +++++++++++++------------- docs/usermanual/chapters/usage.xml | 58 +++++++++++++-------------- 4 files changed, 88 insertions(+), 88 deletions(-) (limited to 'docs') diff --git a/docs/usermanual/chapters/common_use_cases.xml b/docs/usermanual/chapters/common_use_cases.xml index 532e183c56..b5d376a9db 100644 --- a/docs/usermanual/chapters/common_use_cases.xml +++ b/docs/usermanual/chapters/common_use_cases.xml @@ -169,7 +169,7 @@ inherit image toolchain is in your PATH. -ls pre-built/cross/bin +$ ls pre-built/cross/bin arm-linux-g++ arm-linux-ld @@ -204,7 +204,7 @@ arm-linux-objdump lib sub-directory. -ls $PRE_BUILT +$ ls $PRE_BUILT include lib qt2 @@ -546,7 +546,7 @@ SDK_SUFFIX = "toolchain-YOUR" the below command and after the operation finished you should find a SDK in the deployment directory. -# bitbake meta-toolchain-qte +$ bitbake meta-toolchain-qte @@ -581,13 +581,13 @@ SDK_SUFFIX = "toolchain-YOUR" Untar the SDK once -# tar -C / -xjf angstrom-armv5te-linux-gnueabi-toolchain-qte.tar.bz2 +$ tar -C / -xjf angstrom-armv5te-linux-gnueabi-toolchain-qte.tar.bz2 Before using it source the environment -# . /usr/local/angstrom/arm/environment-setup +$ . /usr/local/angstrom/arm/environment-setup Use qmake2 to build software for the target -# qmake2 +$ qmake2 Creating and building a simple example. We will create a simple @@ -595,16 +595,16 @@ Use qmake2 to build software for the target make to cross compile. -# . /usr/local/angstrom/arm/environment-setup -# cd $HOME -# mkdir qte-example -# cd qte-example +$ . /usr/local/angstrom/arm/environment-setup +$ cd $HOME +$ mkdir qte-example +$ cd qte-example -# echo "TEMPLATE=app +$ echo "TEMPLATE=app SOURCES=main.cpp " > qte-example.pro -# echo '#include <QApplication> +$ echo '#include <QApplication> #include <QPushButton> int main(int argc, char** argv) { @@ -618,8 +618,8 @@ int main(int argc, char** argv) { } ' > main.cpp -# qmake2 -# make +$ qmake2 +$ make diff --git a/docs/usermanual/chapters/getting_oe.xml b/docs/usermanual/chapters/getting_oe.xml index 5d6709321a..1d51a55ca0 100644 --- a/docs/usermanual/chapters/getting_oe.xml +++ b/docs/usermanual/chapters/getting_oe.xml @@ -22,8 +22,8 @@ To create the directory structure: -$ mkdir -p $OEBASE/build/conf -$ cd $OEBASE +$ mkdir -p $OEBASE/build/conf +$ cd $OEBASE The $OEBASE/build directory will contain your local configurations and extensions to the OpenEmbedded system which allow @@ -85,8 +85,8 @@ $ mv bitbake-1.8.12 bitbake
Checking Out OpenEmbedded With Git Once you have installed Git, checkout the OpenEmbedded repository: -$ cd $OEBASE -$ git clone git://git.openembedded.org/openembedded +$ cd $OEBASE +$ git clone git://git.openembedded.org/openembedded The $OEBASE/openembedded/ directory should now exist.
@@ -98,22 +98,22 @@ $ git clone git://git.openembedded.org/openembedded
seems good practice to update your OpenEmbedded tree at least daily. To do this, run: -$ cd $OEBASE -$ git pull +$ cd $OEBASE +$ git pull
Changing Branches Working with multiple branches is very easy to do with Git. The OpenEmbedded repository holds many branches. To list all branches, use this command: - $ git branch -a + $ git branch -a Branch names that begin with origin/ denote branches that exist on the remote server. The name with a * in front of it is the branch currently checked out. If you want to work with a remote branch, you must first create a local copy of it. The following command will create a local copy of a remote branch: - $ git branch <local_name> <remote_name> + $ git branch <local_name> <remote_name> To change branches, use this command: - $ git checkout <branch_name> + $ git checkout <branch_name> There are more complicated branch operations that can be done with git, but those are beyond the scope of this document.
@@ -149,12 +149,12 @@ $ git pull If you use a CSH like shell (e.g. on a FreeBSD system), you will set environment variables like this: -$ setenv VAR_NAME "VAR_VALUE" +$ setenv VAR_NAME "VAR_VALUE" , do this: -$ export OEBASE=/path/to/your/oe/installation +$ export OEBASE=/path/to/your/oe/installation @@ -163,7 +163,7 @@ $ export OEBASE=/path/to/your/oe/installation your PATH environment variable like this: -$ export PATH=$OEBASE/bitbake/bin:$PATH +$ export PATH=$OEBASE/bitbake/bin:$PATH In order for bitbake to find the configuration files for @@ -171,7 +171,7 @@ $ export PATH=$OEBASE/bitbake/bin:$PATH variable. -$ export BBPATH=$OEBASE/build:$OEBASE/openembedded +$ export BBPATH=$OEBASE/build:$OEBASE/openembedded Finally, if you wish to allow BitBake to inherit @@ -179,7 +179,7 @@ $ export BBPATH=$OEBASE/build:$OEBASE/openembedded need to set the BB_ENV_EXTRAWHITE variable: -$ export BB_ENV_EXTRAWHITE="OEBASE" +$ export BB_ENV_EXTRAWHITE="OEBASE" Note the absence of the "$" character which implies that you are setting BB_ENV_EXTRAWHITE to the variable name, not @@ -192,9 +192,9 @@ $ export BB_ENV_EXTRAWHITE="OEBASE" copy the default local.conf.sample like this: -$ cd $OEBASE -$ cp openembedded/conf/local.conf.sample build/conf/local.conf -$ vi build/conf/local.conf +$ cd $OEBASE +$ cp openembedded/conf/local.conf.sample build/conf/local.conf +$ vi build/conf/local.conf It is actually recommended to start smaller and keep local.conf.sample in the background. Add diff --git a/docs/usermanual/chapters/recipes.xml b/docs/usermanual/chapters/recipes.xml index 480e8be2b9..e609e98670 100644 --- a/docs/usermanual/chapters/recipes.xml +++ b/docs/usermanual/chapters/recipes.xml @@ -253,7 +253,7 @@ CFLAGS_prepend += "-I${S}/myincludes2 "Note also the lack of a space oe-stylize.py which can be used to reformat your recipes to the correct style. The output will contain a list of warnings (to let you know what you did wrong) which should be edited - out before using the new file.contrib/oe-stylize.py myrecipe.bb > fixed-recipe.bb + out before using the new file.$ contrib/oe-stylize.py myrecipe.bb > fixed-recipe.bb vi fixed-recipe.bb mv fixed.recipe.bb myrecipe.bb @@ -1071,9 +1071,9 @@ ${FILE_DIRNAME}/${PN}:${FILE_DIRNAME}/files:${FILE_DIRNAME}" First we'll create the myhelloworld.c file and a readme file. We'll place this in the files subdirectory, which is one of the places - that is searched for file:// URIs:mkdir recipes/myhelloworld -mkdir recipes/myhelloworld/files -cat > recipes/myhelloworld/files/myhelloworld.c + that is searched for file:// URIs:$ mkdir recipes/myhelloworld +$ mkdir recipes/myhelloworld/files +$ cat > recipes/myhelloworld/files/myhelloworld.c #include <stdio.h> int main(int argc, char** argv) @@ -1082,7 +1082,7 @@ int main(int argc, char** argv) return 0; } ^D -cat > recipes/myhelloworld/files/README.txt +$ cat > recipes/myhelloworld/files/README.txt Readme file for myhelloworld. ^D @@ -1176,7 +1176,7 @@ PR = "r0" We'll consider this release 0 and version 0.1 of a program called - helloworld. So we'll name the recipe myhelloworld_0.1.bb:cat > recipes/myhelloworld/myhelloworld_0.1.bb + helloworld. So we'll name the recipe myhelloworld_0.1.bb:$ cat > recipes/myhelloworld/myhelloworld_0.1.bb DESCRIPTION = "Hello world program" PR = "r0" @@ -1193,7 +1193,7 @@ do_install() { install -m 0644 ${WORKDIR}/README.txt ${D}${docdir}/myhelloworld } ^DNow we are ready to build our package, hopefully it'll all work - since it's such a simple example:~/oe%> bitbake -b recipes/myhelloworld/myhelloworld_0.1.bb + since it's such a simple example:$ bitbake -b recipes/myhelloworld/myhelloworld_0.1.bb NOTE: package myhelloworld-0.1: started NOTE: package myhelloworld-0.1-r0: task do_fetch: started NOTE: package myhelloworld-0.1-r0: task do_fetch: completed @@ -1225,17 +1225,17 @@ NOTE: package myhelloworld-0.1-r0: task do_build: completed NOTE: package myhelloworld-0.1: completed Build statistics: Attempted builds: 1 -~/oe%> +$ The package was successfully built, the output consists of two .ipkg files, which are ready to be installed on the target. One contains - the binary and the other contains the readme file:~/oe%> ls -l tmp/deploy/ipk/*/myhelloworld* + the binary and the other contains the readme file:$ ls -l tmp/deploy/ipk/*/myhelloworld* -rw-r--r-- 1 lenehan lenehan 3040 Jan 12 14:46 tmp/deploy/ipk/sh4/myhelloworld_0.1-r0_sh4.ipk -rw-r--r-- 1 lenehan lenehan 768 Jan 12 14:46 tmp/deploy/ipk/sh4/myhelloworld-doc_0.1-r0_sh4.ipk -~/oe%> +$ It's worthwhile looking at the working directory to see where - various files ended up:~/oe%> find tmp/work/myhelloworld-0.1-r0 + various files ended up:$ find tmp/work/myhelloworld-0.1-r0 tmp/work/myhelloworld-0.1-r0 tmp/work/myhelloworld-0.1-r0/myhelloworld-0.1 tmp/work/myhelloworld-0.1-r0/myhelloworld-0.1/patches @@ -1271,7 +1271,7 @@ tmp/work/myhelloworld-0.1-r0/image/usr/share/doc tmp/work/myhelloworld-0.1-r0/image/usr/share/doc/myhelloworld tmp/work/myhelloworld-0.1-r0/myhelloworld.c tmp/work/myhelloworld-0.1-r0/README.txt -~/oe%>Things to note here are: +$Things to note here are: @@ -1321,11 +1321,11 @@ tmp/work/myhelloworld-0.1-r0/README.txt At this stage it's good to verify that we really did produce a binary for the target and not for our host system. We can check that - with the file command:~/oe%> file tmp/work/myhelloworld-0.1-r0/install/myhelloworld/usr/bin/myhelloworld + with the file command:$ file tmp/work/myhelloworld-0.1-r0/install/myhelloworld/usr/bin/myhelloworld tmp/work/myhelloworld-0.1-r0/install/myhelloworld/usr/bin/myhelloworld: ELF 32-bit LSB executable, Hitachi SH, version 1 (SYSV), for GNU/Linux 2.4.0, dynamically linked (uses shared libs), for GNU/Linux 2.4.0, not stripped -~/oe%> file /bin/ls +$ file /bin/ls /bin/ls: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.4.0, dynamically linked (uses shared libs), for GNU/Linux 2.4.0, stripped -~/oe%>This shows us that the helloworld program is for an SH +$This shows us that the helloworld program is for an SH processor (obviously this will change depending on what your target system is), while checking the /bin/ls program on the host shows us that the host system is an AMD X86-64 system. @@ -1344,7 +1344,7 @@ tmp/work/myhelloworld-0.1-r0/install/myhelloworld/usr/bin/myhelloworld: ELF 32-b of building an autotools based package. Let's take a look at the tuxnes recipe which is an example of a - very simple autotools based recipe:%~oe> cat recipes/tuxnes/tuxnes_0.75.bb + very simple autotools based recipe:$ cat recipes/tuxnes/tuxnes_0.75.bb DESCRIPTION = "Tuxnes Nintendo (8bit) Emulator" HOMEPAGE = "http://prdownloads.sourceforge.net/tuxnes/tuxnes-0.75.tar.gz" LICENSE = "GPLv2" @@ -2070,7 +2070,7 @@ PACKAGES += "FILES-${PN}-test" the install directory there is one subdirectory created per package, and the files are moved into the install directory as they are matched to a specific package. The following shows the packages and files for the - helloworld example:~/oe%> find tmp/work/helloworld-0.1-r0/install + helloworld example:$ find tmp/work/helloworld-0.1-r0/install tmp/work/helloworld-0.1-r0/install tmp/work/helloworld-0.1-r0/install/helloworld-locale tmp/work/helloworld-0.1-r0/install/helloworld-dbg @@ -2085,7 +2085,7 @@ tmp/work/helloworld-0.1-r0/install/helloworld tmp/work/helloworld-0.1-r0/install/helloworld/usr tmp/work/helloworld-0.1-r0/install/helloworld/usr/bin tmp/work/helloworld-0.1-r0/install/helloworld/usr/bin/helloworld -~/oe%>The above shows that the -local, -dbg and -dev packages are +$The above shows that the -local, -dbg and -dev packages are all empty, and the -doc and base package contain a single file each. Using the "-type f" option to find to show just files will make this clearer as well. @@ -2093,17 +2093,17 @@ tmp/work/helloworld-0.1-r0/install/helloworld/usr/bin/helloworld In addition to the install directory the image directory (which corresponds to the destination directory, D) will contain any files that were not - packaged:~/oe%> find tmp/work/helloworld-0.1-r0/image + packaged:$ find tmp/work/helloworld-0.1-r0/image tmp/work/helloworld-0.1-r0/image tmp/work/helloworld-0.1-r0/image/usr tmp/work/helloworld-0.1-r0/image/usr/bin tmp/work/helloworld-0.1-r0/image/usr/share tmp/work/helloworld-0.1-r0/image/usr/share/doc tmp/work/helloworld-0.1-r0/image/usr/share/doc/helloworld -~/oe%>In this case all files were packaged and so there are no +$In this case all files were packaged and so there are no left over files. Using find with "-type - f" makes this much clearer:~/oe%> find tmp/work/helloworld-0.1-r0/image -type f -~/oe%> + f" makes this much clearer:$ find tmp/work/helloworld-0.1-r0/image -type f +$ Messages regarding missing files are also displayed by bitbake during the package task:NOTE: package helloworld-0.1-r0: task do_package: started @@ -2164,7 +2164,7 @@ NOTE: package helloworld-0.1-r0: task do_package: completedExcept in If we look at the lzo_1.08.bb recipe, currently at release 14, it generates a package containing a single - shared library :~oe/build/titan-glibc-25%> find tmp/work/lzo-1.08-r14/install/ + shared library :$ find tmp/work/lzo-1.08-r14/install/ tmp/work/lzo-1.08-r14/install/lzo tmp/work/lzo-1.08-r14/install/lzo/usr tmp/work/lzo-1.08-r14/install/lzo/usr/lib @@ -2178,7 +2178,7 @@ tmp/work/lzo-1.08-r14/install/lzo/usr/lib/liblzo.so.1.0.0Without enabled the package is renamed based on the name of the shared library, which is liblzo.so.1.0.0 in this case. So the name lzo is replaced with - liblzo1:~oe/build/titan-glibc-25%> find tmp/deploy/ipk/ -name '*lzo*' + liblzo1:$ find tmp/deploy/ipk/ -name '*lzo*' tmp/deploy/ipk/sh4/liblzo1_1.08-r14_sh4.ipk tmp/deploy/ipk/sh4/liblzo-dev_1.08-r14_sh4.ipk tmp/deploy/ipk/sh4/liblzo-dbg_1.08-r14_sh4.ipk @@ -2485,9 +2485,9 @@ addtask unpack_extra after do_unpack before do_patch linkend="chapter_reference" />. Looking in the staging area under tmp you can see the result of the - bzip2 recipes staging task:%> find tmp/staging -name '*bzlib*' + bzip2 recipes staging task:$ find tmp/staging -name '*bzlib*' tmp/staging/sh4-linux/include/bzlib.h -%> find tmp/staging -name '*libbz*' +$ find tmp/staging -name '*libbz*' tmp/staging/sh4-linux/lib/libbz2.so tmp/staging/sh4-linux/lib/libbz2.so.1.0 tmp/staging/sh4-linux/lib/libbz2.so.1 @@ -3356,10 +3356,10 @@ do_configure() { via the PV variable). For example if we were to ask bitbake to build procps and the - following packages are available:~/oe%> ls recipes/procps + following packages are available:$ ls recipes/procps procps-3.1.15/ procps-3.2.1/ procps-3.2.5/ procps-3.2.7/ procps.inc procps_3.1.15.bb procps_3.2.1.bb procps_3.2.5.bb procps_3.2.7.bb -~/oe%>then we would expect it to select version +$then we would expect it to select version 3.2.7 (the highest version number) to build. Sometimes this is not actually what you want to happen though. diff --git a/docs/usermanual/chapters/usage.xml b/docs/usermanual/chapters/usage.xml index 5dd00d68e5..47aa7b4869 100644 --- a/docs/usermanual/chapters/usage.xml +++ b/docs/usermanual/chapters/usage.xml @@ -197,7 +197,7 @@ that this may not be exactly what see - there are a lot of options that can effect exactly how things are done, but it gives us a pretty good idea of whats going on. What we are looking at here is the tmp directory (as - specified by TMPDIR in your local.conf):~%> find tmp -maxdepth 2 -type d + specified by TMPDIR in your local.conf):$ find tmp -maxdepth 2 -type d tmp tmp/stamps tmp/cross @@ -329,9 +329,9 @@ tmp/deploy/images To perform a complete rebuild from script you would usually rename or delete tmp and then restart your build. I recommend keeping one old version of tmp around to use for comparison if something goes wrong with - your new build. For example:%> rm -fr tmp.OLD -$> mv tmp tmp.OLD -%> bitbake bootstrap-image + your new build. For example:$ rm -fr tmp.OLD +$ mv tmp tmp.OLD +$ bitbake bootstrap-image
work directory (tmp/work) @@ -344,7 +344,7 @@ $> mv tmp tmp.OLD defined by the PR variable within the recipe). Here's an example of a few of the subdirectories under the work - directory:~%> find tmp/work -maxdepth 1 -type d | head -4 + directory:$ find tmp/work -maxdepth 1 -type d | head -4 tmp/work tmp/work/busybox-1.2.1-r13 tmp/work/libice-1_1.0.3-r0 @@ -354,7 +354,7 @@ tmp/work/arpwatch-2.1a15-r2You can see that the first three (of It's also possible that you may just have a sub directory for your targets architecture and operating system in which case these directories will be in that additional subdirectory, as shown - here:~%> find tmp/work -maxdepth 2 -type d | head -4 + here:$ find tmp/work -maxdepth 2 -type d | head -4 tmp/work tmp/work/sh4-linux tmp/work/sh4-linux/busybox-1.2.1-r13 @@ -375,7 +375,7 @@ tmp/work/sh4-linux/arpwatch-2.1a15-r2 distribution is using it. Using lzo 1.08 as an example we'll examine the contents of the - working directory for a typical recipe:~%> find tmp/work/lzo-1.08-r14 -maxdepth 1 + working directory for a typical recipe:$ find tmp/work/lzo-1.08-r14 -maxdepth 1 tmp/work/lzo-1.08-r14 tmp/work/lzo-1.08-r14/temp tmp/work/lzo-1.08-r14/lzo-1.08 @@ -478,7 +478,7 @@ tmp/work/lzo-1.08-r14/image How about checking out what happened during the configuration of lzo? Well that requires checking the log file for configure that is - generated in the temp directory:~%> less tmp/work/lzo-1.08-r14/temp/log.do_configure.* + generated in the temp directory:$ less tmp/work/lzo-1.08-r14/temp/log.do_configure.* ... checking whether ccache sh4-linux-gcc -ml -m4 suffers the -fschedule-insns bug... unknown checking whether ccache sh4-linux-gcc -ml -m4 suffers the -fstrength-reduce bug... unknown @@ -499,7 +499,7 @@ config.status: executing depfiles commands Or perhaps you want to see how the files were distributed into individual packages prior to packaging? The install directory is where the files are split into separate packages and so that shows us which - files end up where:~%> find tmp/work/lzo-1.08-r14/install + files end up where:$ find tmp/work/lzo-1.08-r14/install tmp/work/lzo-1.08-r14/install tmp/work/lzo-1.08-r14/install/lzo-doc tmp/work/lzo-1.08-r14/install/lzo-dbg @@ -554,7 +554,7 @@ tmp/work/lzo-1.08-r14/install/lzo/usr/lib/liblzo.so.1.0.0 each recipe. Any many of the tasks correspond to those listed above like "download the source". In fact you've probably already seen some of the names of these tasks - bitbake displays them as - they are processed:~%> bitbake lzo + they are processed:$ bitbake lzo NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance. NOTE: Handling BitBake files: \ (4541/4541) [100 %] NOTE: Parsing finished. 4325 cached, 0 parsed, 216 skipped, 0 masked. @@ -827,7 +827,7 @@ NOTE: build 200705041709: completed To determine the full list of tasks available for a specific recipe you can run bitbake on the recipe and asking it for the full list of - available tasks:~%> bitbake -b recipes/perl/perl_5.8.8.bb -c listtasks + available tasks:$ bitbake -b recipes/perl/perl_5.8.8.bb -c listtasks NOTE: package perl-5.8.8: started NOTE: package perl-5.8.8-r11: task do_listtasks: started do_fetchall @@ -851,7 +851,7 @@ do_qa_staging do_patch NOTE: package perl-5.8.8-r11: task do_listtasks: completed NOTE: package perl-5.8.8: completed -~%> +$ If your being observant you'll note that listtasks is in fact a task itself, and that the @@ -878,8 +878,8 @@ NOTE: package perl-5.8.8: completed Here's a typically example that cleans up the package (using the clean task) and the rebuilds it with debugging output - from bitbake enabled:~%> bitbake -b <bb-file> -c clean -~%> bitbake -b <bb-file> -D + from bitbake enabled:$ bitbake -b <bb-file> -c clean +$ bitbake -b <bb-file> -D The options to bitbake that are most useful here are: @@ -1020,27 +1020,27 @@ NOTE: package perl-5.8.8: completed A typically development session might involve editing files in the working directory and then recompiling until it all works:[... test ...] -~%> bitbake -b recipes/testapp/testapp_4.3.bb -c compile -D +$ bitbake -b recipes/testapp/testapp_4.3.bb -c compile -D [... save a copy of main.c and make some changes ...] -~%> vi tmp/work/testapp-4.3-r0/main.c -~%> bitbake -b recipes/testapp/testapp_4.3.bb -c compile -D -f +$ vi tmp/work/testapp-4.3-r0/main.c +$ bitbake -b recipes/testapp/testapp_4.3.bb -c compile -D -f [... create a patch and add it to the recipe ...] -~%> vi recipes/testapp/testapp_4.3.bb +$ vi recipes/testapp/testapp_4.3.bb [... test from clean ...] -~%> bitbake -b recipes/testapp/testapp_4.3.bb -c clean -~%> bitbake -b recipes/testapp/testapp_4.3.bb +$ bitbake -b recipes/testapp/testapp_4.3.bb -c clean +$ bitbake -b recipes/testapp/testapp_4.3.bb [... NOTE: How to create the patch is not covered at this point ...] Here's another example showing how you might go about fixing up the - packaging in your recipe:~%> bitbake -b recipes/testapp/testapp_4.3.bb -c install -f -~%> bitbake -b recipes/testapp/testapp_4.3.bb -c stage -f -~%> find tmp/work/testapp_4.3/install + packaging in your recipe:$ bitbake -b recipes/testapp/testapp_4.3.bb -c install -f +$ bitbake -b recipes/testapp/testapp_4.3.bb -c stage -f +$ find tmp/work/testapp_4.3/install ... -~%> vi recipes/testapp/testapp_4.3.bbAt this stage you play with +$ vi recipes/testapp/testapp_4.3.bbAt this stage you play with the PACKAGE_ and FILES_ variables and then repeat the above sequence. @@ -1062,7 +1062,7 @@ NOTE: package perl-5.8.8: completed
Interactive bitbake - To interactively test things use:~%> bitbake -ithis + To interactively test things use:$ bitbake -ithis will open the bitbake shell. From here there are a lot of commands available (try help). @@ -1103,7 +1103,7 @@ BB>> build net-snmpNote that you can use wildcards in the role="bold">devshell" With the inclusion of this class you'll find that devshell is - added as a new task that you can use on recipes:~%> bitbake -b recipes/lzo/lzo_1.08.bb -c listtasks + added as a new task that you can use on recipes:$ bitbake -b recipes/lzo/lzo_1.08.bb -c listtasks NOTE: package lzo-1.08: started NOTE: package lzo-1.08-r14: task do_listtasks: started do_devshell @@ -1130,7 +1130,7 @@ NOTE: package lzo-1.08-r14: task do_listtasks: completed NOTE: package lzo-1.08: completed To bring up the devshell you call bitbake on a recipe and ask it - for the devshell task:~%> ./bb -b recipes/lzo/lzo_1.08.bb -c devshell + for the devshell task:$ bitbake -b recipes/lzo/lzo_1.08.bb -c devshell NOTE: package lzo-1.08: started NOTE: package lzo-1.08-r14: task do_devshell: started [... devshell will appear here ...] @@ -1163,11 +1163,11 @@ NOTE: package lzo-1.08: completed a devshell. It requires no changes to your configuration, instead you simply - build the devshell recipe:bitabike devshell + build the devshell recipe:$ bitbake devshell and then manually startup the shell. Once in the shell you'll usually want to change into the working directory for the recipe you are - working on:~%> ./tmp/deploy/addons/sh4-linux-erouter-titan-devshell + working on:$ ./tmp/deploy/addons/sh4-linux-erouter-titan-devshell bash: alias: `./configure': invalid alias name [OE::sh4-linux-erouter-titan]:~$ cd tmp/work/lzo-1.08-r14/lzo-1.08 [OE::sh4-linux-erouter-titan]:~tmp/work/lzo-1.08-r14/lzo-1.08$ -- cgit 1.2.3-korg