From 9b6418d9f32df4f5dffcacfcb09214d44b4b3a60 Mon Sep 17 00:00:00 2001
From: Roger Monk <r-monk@ti.com>
Date: Wed, 26 May 2010 23:49:23 +0100
Subject: angstrom-uboot-scripts: Add linuxtag demo script

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Koen Kooi <k-kooi@ti.com>
---
 .../angstrom-uboot-scripts/linuxtagdemo.cmd        | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100755 recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd

(limited to 'recipes/angstrom')

diff --git a/recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd b/recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd
new file mode 100755
index 0000000000..b232f79141
--- /dev/null
+++ b/recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd
@@ -0,0 +1,37 @@
+#setenv usbtty 'cdc_acm'
+#setenv mpurate '500'
+#setenv buddy 'none'
+
+#setenv vram '12M'
+#setenv defaultdisplay 'dvi'
+#setenv dvimode '640x480MR-16@60'
+
+setenv setbase 'setenv baseargs ${memmap} console=${console} mpurate=${mpurate} buddy=${buddy} vram=${vram} musb_hdrc.fifomode=${musbfifomode} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay}'
+
+setenv nandroot 'root=/dev/mtdblock4 rw rootfstype=jffs2'
+setenv nandargs 'run setbase; setenv bootargs ${baseargs} ${nandroot}'
+setenv nandloaduimage 'nand read ${loadaddr} 280000 400000'
+setenv nandboot 'run nandloadimage; bootm ${loadaddr}'
+
+setenv mmcroot 'root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait'
+setenv mmcargs 'run setbase; setenv bootargs ${baseargs} ${mmcroot}'
+setenv mmcloaduimage 'fatload mmc 0 ${loadaddr} uImage'
+setenv mmcboot 'run mmcloaduimage; bootm ${loadaddr}'
+
+echo Setting Specific Environment from MMC boot.scr
+
+# set musb to only use 8k for fifo memory - not necesary on xm, but safe anyway
+setenv musbfifomode '5'
+
+# mpurate is read from omap registers on omap3530 (which x-load has set to 600mhz?), on xm, uboot sets this to 1GHz
+#setenv mpurate '720'  
+setenv memmap 'mem=80M mem=128M@0x88000000'
+setenv vram '16M omapfb.vram=0:8M,1:4M,2:4M'
+setenv defaultdisplay 'dvi'
+setenv dvimode 'hd720'
+#setenv dvimode '1280x720MR-32@60'
+
+run mmcargs
+printenv
+run mmcboot
+
-- 
cgit 1.2.3-korg