From 709c4d66e0b107ca606941b988bad717c0b45d9b Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Tue, 17 Mar 2009 14:32:59 -0400 Subject: rename packages/ to recipes/ per earlier agreement See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko Acked-by: Mike Westerhof Acked-by: Philip Balister Acked-by: Khem Raj Acked-by: Marcin Juszkiewicz Acked-by: Koen Kooi Acked-by: Frans Meulenbroeks --- recipes/gcc/gcc-4.3.1/debian/ada-libgnatprj.dpatch | 4809 ++++++++++++++++++++ 1 file changed, 4809 insertions(+) create mode 100644 recipes/gcc/gcc-4.3.1/debian/ada-libgnatprj.dpatch (limited to 'recipes/gcc/gcc-4.3.1/debian/ada-libgnatprj.dpatch') diff --git a/recipes/gcc/gcc-4.3.1/debian/ada-libgnatprj.dpatch b/recipes/gcc/gcc-4.3.1/debian/ada-libgnatprj.dpatch new file mode 100644 index 0000000000..dcbf30aef7 --- /dev/null +++ b/recipes/gcc/gcc-4.3.1/debian/ada-libgnatprj.dpatch @@ -0,0 +1,4809 @@ +#! /bin/sh -e + +# DP: - Introduce a new shared library named libgnatprj, containing +# DP: the GNAT project file manager licensed under the pure GPL, for +# DP: use in GNAT tools, GLADE and GPS. Link the GNAT tools against +# DP: this new library. + +# This patch seems large, but the hunks in Makefile.in are actually +# generated from Makefile.def using autogen. + +# !!! Must be applied after ada-libgnatvsn.dpatch + +dir=./ +if [ $# -eq 3 -a "$2" = '-d' ]; then + pdir="-d $3" + dir="$3/" +elif [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) + patch $pdir -f --no-backup-if-mismatch -p0 < $0 + cd ${dir} && autoconf + ;; + -unpatch) + patch $pdir -f --no-backup-if-mismatch -R -p0 < $0 + ;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +esac +exit 0 + +Index: gcc/ada/config-lang.in +=================================================================== +--- gcc/ada/config-lang.in.orig ++++ gcc/ada/config-lang.in +@@ -34,8 +34,8 @@ + + outputs=ada/Makefile + +-target_libs="target-libada target-libgnatvsn" +-lang_dirs="libada libgnatvsn gnattools" ++target_libs="target-libada target-libgnatvsn target-libgnatprj" ++lang_dirs="libada libgnatvsn libgnatprj gnattools" + + # Ada will not work until the front end starts emitting GIMPLE trees. + build_by_default=no +Index: gnattools/Makefile.in +=================================================================== +--- gnattools/Makefile.in.orig ++++ gnattools/Makefile.in +@@ -35,13 +35,13 @@ + target_noncanonical=@target_noncanonical@ + + CFLAGS=-O2 -Wall +-INCLUDES = -I@srcdir@/../gcc/ada -I@srcdir@/../gcc + ADA_CFLAGS=-O2 -gnatn +-ADA_INCLUDES=-nostdinc -I- -I. -I../gcc/ada/rts -I../libgnatvsn ++ADA_INCLUDES=-nostdinc -I- -I. -I../gcc/ada/rts -I../libgnatvsn -I../libgnatprj + LIB_VERSION=$(strip $(shell grep ' Library_Version :' \ + ../libgnatvsn/gnatvsn.ads | sed -e 's/.*"\(.*\)".*/\1/')) + ADA_LIBS := -L../gcc/ada/rts -lgnat-$(LIB_VERSION) + ADA_LIBS += -L../libgnatvsn -lgnatvsn ++ADA_LIBS += -L../libgnatprj -lgnatprj + + # We will use the just-built compiler to compile and link everything. + GCC=../gcc/xgcc -B../gcc/ +@@ -66,74 +66,18 @@ + + # Since we don't have gnatmake, we must specify the full list of + # object files necessary to build gnatmake and gnatlink. +-# TODO: remove from these lists the objects that are part of +-# libgnatprj. + GNATLINK_OBJS = \ +-ali.o \ +-butil.o \ +-fmap.o \ + gnatlink.o \ + indepsw.o \ +-osint.o \ +-prefix.o \ +-rident.o \ +-sdefault.o \ +-stylesw.o \ +-switch.o \ +-targparm.o \ + validsw.o + + GNATMAKE_OBJS = \ +-ali-util.o \ +-ali.o \ +-binderr.o \ +-butil.o \ +-err_vars.o \ +-erroutc.o \ +-errutil.o \ +-fmap.o \ + fname-sf.o \ +-fname-uf.o \ + gnatmake.o \ + make.o \ + makeusg.o \ +-makeutl.o \ +-mlib-fil.o \ + mlib-prj.o \ +-mlib-tgt.o \ +-mlib-tgt-specific.o \ +-mlib-utl.o \ +-mlib.o \ + osint-m.o \ +-osint.o \ +-prefix.o \ +-prj-attr-pm.o \ +-prj-attr.o \ +-prj-com.o \ +-prj-dect.o \ +-prj-env.o \ +-prj-err.o \ +-prj-ext.o \ +-prj-nmsc.o \ +-prj-pars.o \ +-prj-part.o \ +-prj-proc.o \ +-prj-strt.o \ +-prj-tree.o \ +-prj-util.o \ +-prj.o \ +-rident.o \ +-scng.o \ +-sdefault.o \ +-sfn_scan.o \ +-sinput-c.o \ +-sinput-p.o \ +-styleg.o \ +-stylesw.o \ +-switch-m.o \ +-switch.o \ +-targparm.o \ +-tempdir.o \ + usage.o \ + validsw.o \ + $(EXTRA_GNATMAKE_OBJS) +@@ -175,11 +119,6 @@ + for file in $(BODIES) $(SPECS); do \ + $(LN_S) -f $$file .; \ + done +- rm -f sdefault.adb; $(LN_S) ../gcc/ada/sdefault.adb . +- $(foreach PAIR,$(TOOLS_TARGET_PAIRS), \ +- rm -f $(word 1,$(subst <, ,$(PAIR)));\ +- $(LN_S) @srcdir@/../gcc/ada/$(word 2,$(subst <, ,$(PAIR))) \ +- $(word 1,$(subst <, ,$(PAIR)));) + touch $@ + + gnattools-native: ../gcc/ada/rts/libgnat-$(LIB_VERSION).so +@@ -192,19 +131,16 @@ + vpath %.c @srcdir@/../gcc/ada:@srcdir@/../gcc + vpath %.h @srcdir@/../gcc/ada + +-# Because the just-built gcc is a host tool like us, we can use some +-# of its object files, e.g. prefix.o. +-vpath prefix.o ../gcc +- + # gnatlink + +-gnatlink-static: $(GNATLINK_OBJS) b_gnatl.o link.o ++gnatlink-static: $(GNATLINK_OBJS) b_gnatl.o + $(GCC) -o $@ $^ \ ++ ../libgnatprj/libgnatprj.a \ + ../libgnatvsn/libgnatvsn.a \ + ../gcc/ada/rts/libgnat.a \ + ../libiberty/libiberty.a + +-gnatlink: $(GNATLINK_OBJS) b_gnatl.o link.o ++gnatlink: $(GNATLINK_OBJS) b_gnatl.o + $(GCC) -o $@ $^ $(ADA_LIBS) ../libiberty/libiberty.a + + b_gnatl.o: b_gnatl.c adaint.h +@@ -215,13 +151,14 @@ + + # gnatmake + +-gnatmake-static: $(GNATMAKE_OBJS) b_gnatm.o link.o ++gnatmake-static: $(GNATMAKE_OBJS) b_gnatm.o + $(GCC) -o $@ $(ADA_CFLAGS) $^ \ ++ ../libgnatprj/libgnatprj.a \ + ../libgnatvsn/libgnatvsn.a \ + ../gcc/ada/rts/libgnat.a \ + ../libiberty/libiberty.a + +-gnatmake: $(GNATMAKE_OBJS) b_gnatm.o link.o ++gnatmake: $(GNATMAKE_OBJS) b_gnatm.o + $(GCC) -o $@ $(ADA_CFLAGS) $^ $(ADA_LIBS) ../libiberty/libiberty.a + + b_gnatm.o: b_gnatm.c adaint.h +@@ -231,19 +168,11 @@ + ../gcc/gnatbind -C -o $@ $(ADA_INCLUDES) gnatmake.ali + + # Other tools +-gnatkr: +- if [ ! -f $@.adb ] ; then $(LN_S) ../../src/gcc/ada/$@.ad[bs] .; fi +- ./gnatmake-static -c -b $@ $(ADA_CFLAGS) $(ADA_INCLUDES) \ +- --GCC="$(GCC)" \ +- --GNATBIND=../gcc/gnatbind +- ./gnatlink-static -o $@ $@.ali $^ $(ADA_INCLUDES) $(ADA_LIBS) \ +- --GCC="$(GCC) $(ADA_INCLUDES)" +- + gnat: gnatcmd + cp -lp $< $@ + +-gnatbind gnatchop gnatclean gnatcmd gnatfind gnatls gnatname gnatprep gnatxref gprmake: \ +-link.o prefix.o ++gnatbind gnatchop gnatclean gnatcmd gnatfind gnatkr gnatls gnatname gnatprep \ ++gnatxref gprmake: + if [ ! -f $@.adb ] ; then $(LN_S) ../../src/gcc/ada/$@.ad[bs] .; fi + ./gnatmake-static -c -b $@ $(ADA_CFLAGS) $(ADA_INCLUDES) \ + --GCC="$(GCC)" \ +@@ -252,29 +181,19 @@ + ../libiberty/libiberty.a \ + --GCC="$(GCC) $(ADA_INCLUDES)" + +-gnatbl: gnatbl.c link.o prefix.o ++gnatbl: gnatbl.c + $(GCC) -o $@ $< $(CFLAGS) \ + -I../gcc -I@srcdir@/../gcc/config -I@srcdir@/../gcc \ + -I@srcdir@/../include \ + $(filter-out %.c,$^) \ + $(ADA_LIBS) ../libiberty/libiberty.a + +-# Force compiling sdefault.adb, not .ads, to produce sdefault.o +-sdefault.o: sdefault.adb +- +-sdefault.adb: stamp-gnattools-sources +- + %.o: %.adb + $(GCC) -c -o $@ $< $(ADA_CFLAGS) $(ADA_INCLUDES) + + %.o: %.ads + $(GCC) -c -o $@ $< $(ADA_CFLAGS) $(ADA_INCLUDES) + +-%.o: %.c +- $(GCC) -c -o $@ $< $(CFLAGS) $(INCLUDES) +- +-prefix.o: +- + # Other + # ----- + +Index: libgnatprj/configure +=================================================================== +--- /dev/null ++++ libgnatprj/configure +@@ -0,0 +1,3138 @@ ++#! /bin/sh ++# Guess values for system-dependent variables and create Makefiles. ++# Generated by GNU Autoconf 2.61. ++# ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# This configure script is free software; the Free Software Foundation ++# gives unlimited permission to copy, distribute and modify it. ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ case $as_dir in ++ /*) ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++ ++exec 7<&0 &1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_clean_files= ++ac_config_libobj_dir=. ++LIBOBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++# Identity of this package. ++PACKAGE_NAME= ++PACKAGE_TARNAME= ++PACKAGE_VERSION= ++PACKAGE_STRING= ++PACKAGE_BUGREPORT= ++ ++ac_unique_file="Makefile.in" ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++target ++target_cpu ++target_vendor ++target_os ++target_noncanonical ++LN_S ++x_ada_cflags ++default_gnattools_target ++TOOLS_TARGET_PAIRS ++LIBOBJS ++LTLIBOBJS' ++ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias' ++ ++ ++# Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++cache_file=/dev/null ++exec_prefix=NONE ++no_create= ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++verbose= ++x_includes=NONE ++x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++docdir='${datarootdir}/doc/${PACKAGE}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' ++ ++ac_prev= ++ac_dashdash= ++for ac_option ++do ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval $ac_prev=\$ac_option ++ ac_prev= ++ continue ++ fi ++ ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir=$ac_optarg ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build_alias ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build_alias=$ac_optarg ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; ++ ++ -datadir | --datadir | --datadi | --datad) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ ++ -disable-* | --disable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; ++ ++ -enable-* | --enable-*) ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ++ { (exit 1); exit 1; }; } ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix=$ac_optarg ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host_alias ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir=$ac_optarg ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir=$ac_optarg ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir=$ac_optarg ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst | --locals) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir=$ac_optarg ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c | -n) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir=$ac_optarg ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix=$ac_optarg ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix=$ac_optarg ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix=$ac_optarg ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir=$ac_optarg ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir=$ac_optarg ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site=$ac_optarg ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir=$ac_optarg ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir=$ac_optarg ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target_alias ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target_alias=$ac_optarg ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; ++ ++ -with-* | --with-*) ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; ++ ++ -without-* | --without-*) ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 ++ { (exit 1); exit 1; }; } ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes=$ac_optarg ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries=$ac_optarg ;; ++ ++ -*) { echo "$as_me: error: unrecognized option: $ac_option ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ++ ;; ++ ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { (exit 1); exit 1; }; } ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ ++ *) ++ # FIXME: should be removed in autoconf 3.0. ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ { echo "$as_me: error: missing argument to $ac_option" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir ++do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; ++ esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } ++done ++ ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used." >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$0" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ srcdir=$ac_confdir ++ if test ! -r "$srcdir/$ac_unique_file"; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 ++ { (exit 1); exit 1; }; } ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures this package to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ [$ac_default_prefix] ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ [PREFIX] ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++System types: ++ --build=BUILD configure for building on BUILD [guessed] ++ --host=HOST cross-compile to build programs to run on HOST [BUILD] ++ --target=TARGET configure for building compilers for TARGET [HOST] ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ ++ cat <<\_ACEOF ++ ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++configure ++generated by GNU Autoconf 2.61 ++ ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by $as_me, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++## --------- ## ++## Platform. ## ++## --------- ## ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ echo "PATH: $as_dir" ++done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++## ----------- ## ++## Core tests. ## ++## ----------- ## ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 2) ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ ac_configure_args="$ac_configure_args '$ac_arg'" ++ ;; ++ esac ++ done ++done ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ cat <<\_ASBOX ++## ---------------- ## ++## Cache variables. ## ++## ---------------- ## ++_ASBOX ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ cat <<\_ASBOX ++## ----------------- ## ++## Output variables. ## ++## ----------------- ## ++_ASBOX ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ cat <<\_ASBOX ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## ++_ASBOX ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ cat <<\_ASBOX ++## ----------- ## ++## confdefs.h. ## ++## ----------- ## ++_ASBOX ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer explicitly selected file to automatically selected ones. ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" ++fi ++shift ++for ac_site_file ++do ++ if test -r "$ac_site_file"; then ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" ++ fi ++done ++ ++if test -r "$cache_file"; then ++ # Some versions of bash will fail to source /dev/null (special ++ # files actually), so we avoid doing that. ++ if test -f "$cache_file"; then ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi ++else ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++ ++ ++ ++ ++# Start of actual configure tests ++ ++ac_aux_dir= ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } ++if test -z "$INSTALL"; then ++if test "${ac_cv_path_install+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in ++ ./ | .// | /cC/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++ ++# Make sure we can run config.sub. ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} ++ { (exit 1); exit 1; }; } ++ ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } ++if test "${ac_cv_build+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { (exit 1); exit 1; }; } ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++build=$ac_cv_build ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } ++if test "${ac_cv_host+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++host=$ac_cv_host ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ echo "$as_me:$LINENO: checking target system type" >&5 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; } ++if test "${ac_cv_target+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "x$target_alias" = x; then ++ ac_cv_target=$ac_cv_host ++else ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 ++echo "${ECHO_T}$ac_cv_target" >&6; } ++case $ac_cv_target in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 ++echo "$as_me: error: invalid value of canonical target" >&2;} ++ { (exit 1); exit 1; }; };; ++esac ++target=$ac_cv_target ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_target ++shift ++target_cpu=$1 ++target_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++target_os=$* ++IFS=$ac_save_IFS ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac ++ ++ ++# The aliases save the names the user supplied, while $host etc. ++# will get canonicalized. ++test -n "$target_alias" && ++ test "$program_prefix$program_suffix$program_transform_name" = \ ++ NONENONEs,x,x, && ++ program_prefix=${target_alias}- ++ ++# Autoconf M4 include file defining utility macros for complex Canadian ++# cross builds. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++#### ++# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM ++# or AC_INIT. ++# These demand that AC_CANONICAL_SYSTEM be called beforehand. ++ ++#### ++# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) ++# Like plain AC_CHECK_TOOLS, but require prefix if build!=host. ++ ++ ++#### ++# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) ++# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target. ++ ++ ++ ++# Backported from Autoconf 2.5x; can go away when and if ++# we switch. Put the OS path separator in $PATH_SEPARATOR. ++ ++ ++ ++ ++# ACX_HAVE_GCC_FOR_TARGET ++# Check if the variable GCC_FOR_TARGET really points to a GCC binary. ++ ++ ++# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG) ++# Searching for installed target binutils. We need to take extra care, ++# else we may find the wrong assembler, linker, etc., and lose. ++# ++# First try --with-build-time-tools, if specified. ++# ++# For build != host, we ask the installed GCC for the name of the tool it ++# uses, and accept it if it is an absolute path. This is because the ++# only good choice for a compiler is the same GCC version that is being ++# installed (or we couldn't make target libraries), and we assume that ++# on the host system we'll have not only the same GCC version, but also ++# the same binutils version. ++# ++# For build == host, search the same directories that the installed ++# compiler will search. We used to do this for the assembler, linker, ++# and nm only; for simplicity of configuration, however, we extend this ++# criterion to tools (such as ar and ranlib) that are never invoked by ++# the compiler, to avoid mismatches. ++# ++# Also note we have to check MD_EXEC_PREFIX before checking the user's path ++# if build == target. This makes the most sense only when bootstrapping, ++# but we also do so when build != host. In this case, we hope that the ++# build and host systems will have similar contents of MD_EXEC_PREFIX. ++# ++# If we do not find a suitable binary, then try the user's path. ++ ++ ++### ++# AC_PROG_CPP_WERROR ++# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which ++# triggers warnings from the preprocessor. Will be in autoconf 2.58. ++# For now, using this also overrides header checks to use only the ++# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a ++# bit harder from here). ++# Eventually autoconf will default to checking headers with the compiler ++# instead, and we'll have to do this differently. ++ ++# AC_PROG_CPP_WERROR ++ ++# Test for GNAT. ++# We require the gnatbind program, and a compiler driver that ++# understands Ada. We use the user's CC setting, already found. ++# ++# Sets the shell variable have_gnat to yes or no as appropriate, and ++# substitutes GNATBIND and GNATMAKE. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ case ${build_alias} in ++ "") build_noncanonical=${build} ;; ++ *) build_noncanonical=${build_alias} ;; ++esac ++ ++ case ${host_alias} in ++ "") host_noncanonical=${build_noncanonical} ;; ++ *) host_noncanonical=${host_alias} ;; ++esac ++ ++ case ${target_alias} in ++ "") target_noncanonical=${host_noncanonical} ;; ++ *) target_noncanonical=${target_alias} ;; ++esac ++ ++ ++ ++ ++# Need to pass this down for now :-P ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } ++fi ++ ++ ++# Determine x_ada_cflags ++case $host in ++ hppa*) x_ada_cflags=-mdisable-indexing ;; ++ *) x_ada_cflags= ;; ++esac ++ ++ ++# Determine what to build for 'gnattools' ++if test $build = $target ; then ++ # Note that build=target is almost certainly the wrong test; FIXME ++ default_gnattools_target="gnattools-native" ++else ++ default_gnattools_target="gnattools-cross" ++fi ++ ++ ++# Target-specific stuff (defaults) ++TOOLS_TARGET_PAIRS= ++ ++ ++# Per-target case statement ++# ------------------------- ++case "${target}" in ++ alpha*-dec-vx*) # Unlike all other Vxworks ++ ;; ++ m68k*-wrs-vx* \ ++ | powerpc*-wrs-vxworks \ ++ | sparc*-wrs-vx* \ ++ | *86-wrs-vxworks \ ++ | xscale*-wrs-vx* \ ++ | xscale*-wrs-coff \ ++ | mips*-wrs-vx*) ++ TOOLS_TARGET_PAIRS="mlib-tgt-specific.adbconfcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++# Transform confdefs.h into DEFS. ++# Protect against shell expansion while executing Makefile rules. ++# Protect against Makefile macro expansion. ++# ++# If the first sed substitution is executed (which looks for macros that ++# take arguments), then branch to the quote section. Otherwise, ++# look for a macro that doesn't take arguments. ++ac_script=' ++t clear ++:clear ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g ++t quote ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g ++t quote ++b any ++:quote ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g ++s/\[/\\&/g ++s/\]/\\&/g ++s/\$/$$/g ++H ++:any ++${ ++ g ++ s/^\n// ++ s/\n/ /g ++ p ++} ++' ++DEFS=`sed -n "$ac_script" confdefs.h` ++ ++ ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIBOBJS=$ac_libobjs ++ ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++ ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. ++ ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done ++ ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++ ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# CDPATH. ++$as_unset CDPATH ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++ ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++ ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by $as_me, which was ++generated by GNU Autoconf 2.61. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++# Files that config.status was made for. ++config_files="$ac_config_files" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. ++ ++Usage: $0 [OPTIONS] [FILE]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ ++Configuration files: ++$config_files ++ ++Report bugs to ." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++config.status ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++ ++Copyright (C) 2006 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --he | --h | --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ;; ++ ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; ++ ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} ++ ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# ++ ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++target!$target$ac_delim ++target_cpu!$target_cpu$ac_delim ++target_vendor!$target_vendor$ac_delim ++target_os!$target_os$ac_delim ++target_noncanonical!$target_noncanonical$ac_delim ++LN_S!$LN_S$ac_delim ++x_ada_cflags!$x_ada_cflags$ac_delim ++default_gnattools_target!$default_gnattools_target$ac_delim ++TOOLS_TARGET_PAIRS!$TOOLS_TARGET_PAIRS$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 59; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} ++ ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac ++ ;; ++ ++ ++ ++ esac ++ ++done # for ac_tag ++ ++ ++{ (exit 0); exit 0; } ++_ACEOF ++chmod +x $CONFIG_STATUS ++ac_clean_files=$ac_clean_files_save ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || { (exit 1); exit 1; } ++fi ++ +Index: libgnatprj/Makefile.in +=================================================================== +--- /dev/null ++++ libgnatprj/Makefile.in +@@ -0,0 +1,177 @@ ++# Makefile for libgnatprj. ++# Copyright (c) 2006 Ludovic Brenta ++# ++# This file is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ++ ++# Default target; must be first. ++all: libgnatprj ++ ++.SUFFIXES: ++ ++CPUS := $(shell getconf _NPROCESSORS_ONLN) ++LIB_VERSION := $(strip $(shell grep ' Library_Version :' \ ++ @srcdir@/../gcc/ada/gnatvsn.ads | \ ++ sed -e 's/.*"\(.*\)".*/\1/')) ++GCC:=../gcc/xgcc -B../gcc/ ++LIBGNAT_JUST_BUILT := -nostdinc -I../gcc/ada/rts ++LIBGNATVSN := -I../libgnatvsn ++CFLAGS := -g -O2 ++ADAFLAGS := -g -O2 -gnatn ++BASEVER := $(shell cat @srcdir@/../gcc/BASE-VER) ++DEVPHASE := $(shell cat @srcdir@/../gcc/DEV-PHASE) ++DATESTAMP := $(shell cat @srcdir@/../gcc/DATESTAMP) ++TOOLS_TARGET_PAIRS := @TOOLS_TARGET_PAIRS@ ++LN_S := @LN_S@ ++ ++ifneq (@build@,@host@) ++ CFLAGS += -b @host@ ++endif ++ ++.PHONY: libgnatprj install ++libgnatprj: libgnatprj.so.$(LIB_VERSION) libgnatprj.a ++ ++# Here we list one file per Ada unit: the body file if the unit has a ++# body, the spec file otherwise. ++PRJ_SOURCES := ali.adb ali-util.adb butil.adb binderr.adb errout.adb \ ++erroutc.adb errutil.adb err_vars.ads fname-uf.adb fmap.adb impunit.adb \ ++lib-util.adb makeutl.adb mlib.adb mlib-fil.adb mlib-tgt.adb \ ++mlib-tgt-specific.adb mlib-utl.adb osint.adb osint-c.adb prj.adb prj-attr.adb \ ++prj-attr-pm.adb prj-com.ads prj-dect.adb prj-env.adb prj-err.adb prj-ext.adb \ ++prj-nmsc.adb prj-pars.adb prj-part.adb prj-pp.adb prj-proc.adb prj-strt.adb \ ++prj-tree.adb prj-util.adb rident.ads scng.adb sfn_scan.adb sinfo-cn.adb \ ++sinput-c.adb sinput-p.adb style.ads styleg.adb styleg-c.adb stylesw.adb \ ++switch.adb switch-m.adb targparm.adb tempdir.adb ++ ++# Source files generated in build/gcc/ada, not src/gcc/ada. ++GENERATED_SOURCES := sdefault.adb ++ ++SOURCES := $(PRJ_SOURCES) $(GENERATED_SOURCES) ++ ++OBJECTS := $(patsubst %.ads,%.o,$(SOURCES:.adb=.o)) ++ ++# Add some object files compiled from C sources. prefix.o requires ++# some objects from libiberty. ++OBJECTS += concat.o link.o prefix.o xexit.o xmalloc.o xstrdup.o ++ ++vpath %.c @srcdir@/../gcc/ada ++ ++libgnatprj.so.$(LIB_VERSION): $(addprefix obj-shared/,$(OBJECTS)) ++ : # Make libgnatprj.so ++ $(GCC) -o $@ -shared -fPIC -Wl,--soname,$@ $^ \ ++ -L../gcc/ada/rts -lgnat-$(LIB_VERSION) \ ++ -L../libgnatvsn -lgnatvsn ++ $(LN_S) -f libgnatprj.so.$(LIB_VERSION) libgnatprj.so ++ chmod a=r obj-shared/*.ali ++# Make the .ali files, but not the .o files, visible to the gnat tools. ++ cp -lp obj-shared/*.ali . ++ ++$(addprefix obj-shared/,$(OBJECTS)): | stamp-libgnatprj-sources obj-shared ++ ++obj-shared/%.o: %.adb ++ $(GCC) -c -fPIC $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ ++ ++obj-shared/%.o: %.ads ++ $(GCC) -c -fPIC $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ ++ ++obj-shared/%.o: %.c ++ $(GCC) -c -fPIC $(CFLAGS) -I@srcdir@/../gcc $< -o $@ ++ ++obj-shared/prefix.o: @srcdir@/../gcc/prefix.c ++ $(GCC) -c -fPIC $(CFLAGS) -DPREFIX=\"@prefix@\" -DBASEVER=\"$(BASEVER)\" \ ++ -I@srcdir@/../gcc -I@srcdir@/../include -I../gcc -I../libiberty \ ++ $< -o $@ ++ ++obj-shared/%.o: @srcdir@/../libiberty/%.c ++ $(GCC) -c -fPIC $(CFLAGS) \ ++ -I@srcdir@/../libiberty -I@srcdir@/../include $< -o $@ ++ ++obj-shared: ++ -mkdir $@ ++ ++libgnatprj.a: $(addprefix obj-static/,$(OBJECTS)) ++ : # Make libgnatprj.a ++ ar rc $@ $^ ++ ranlib $@ ++ ++$(addprefix obj-static/,$(OBJECTS)): | stamp-libgnatprj-sources obj-static ++ ++obj-static/%.o: %.adb ++ $(GCC) -c $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ ++ ++obj-static/%.o: %.ads ++ $(GCC) -c $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ ++ ++obj-static/%.o: %.c ++ $(GCC) -c $(CFLAGS) -I@srcdir@/../gcc $< -o $@ ++ ++obj-static/prefix.o: @srcdir@/../gcc/prefix.c ++ $(GCC) -c $(CFLAGS) -DPREFIX=\"@prefix@\" -DBASEVER=\"$(BASEVER)\" \ ++ -I@srcdir@/../gcc -I@srcdir@/../include -I../gcc -I../libiberty \ ++ $< -o $@ ++ ++obj-static/%.o: @srcdir@/../libiberty/%.c ++ $(GCC) -c -fPIC $(CFLAGS) \ ++ -I@srcdir@/../libiberty -I@srcdir@/../include $< -o $@ ++ ++obj-static: ++ -mkdir $@ ++ ++$(SOURCES): stamp-libgnatprj-sources ++ ++stamp-libgnatprj-sources: ++ for file in $(PRJ_SOURCES); do \ ++ ads=$$(echo $$file | sed 's/\.adb/.ads/'); \ ++ if [ -f @srcdir@/../gcc/ada/$$file -a ! -L $$file ] ; then $(LN_S) @srcdir@/../gcc/ada/$$file .; fi; \ ++ if [ -f @srcdir@/../gcc/ada/$$ads -a ! -L $$ads ] ; then $(LN_S) @srcdir@/../gcc/ada/$$ads .; fi; \ ++ done ++ for file in $(GENERATED_SOURCES); do \ ++ ads=$$(echo $$file | sed 's/\.adb/.ads/'); \ ++ if [ -f ../gcc/ada/$$file -a ! -L $$file ] ; then $(LN_S) ../gcc/ada/$$file .; fi; \ ++ if [ -f ../gcc/ada/$$ads -a ! -L $$ads ] ; then $(LN_S) ../gcc/ada/$$ads .; \ ++ else \ ++ if [ -f @srcdir@/../gcc/ada/$$ads -a ! -L $$ads ] ; then $(LN_S) @srcdir@/../gcc/ada/$$ads .; fi; \ ++ fi; \ ++ done ++ $(foreach PAIR,$(TOOLS_TARGET_PAIRS), \ ++ rm -f $(word 1,$(subst <, ,$(PAIR)));\ ++ $(LN_S) @srcdir@/../gcc/ada/$(word 2,$(subst <, ,$(PAIR))) \ ++ $(word 1,$(subst <, ,$(PAIR)));) ++ touch $@ ++ ++# Generate a list of source files (.ads and .adb) to install. Almost ++# all of them are in src/gcc/ada, but some are generated during build ++# and are in build/gcc/ada. ++BODIES := $(filter %.adb,$(PRJ_SOURCES)) ++SPECS := $(filter %.ads,$(PRJ_SOURCES)) $(patsubst %.adb,%.ads,$(BODIES)) ++SOURCES_TO_INSTALL := \ ++$(addprefix @srcdir@/../gcc/ada/,$(SPECS) $(BODIES)) \ ++$(addprefix ../gcc/ada/,$(GENERATED_SOURCES)) ++ ++install: libgnatprj ++ $(INSTALL_DATA) libgnatprj.a $(DESTDIR)$(prefix)/lib ++ $(INSTALL_DATA) libgnatprj.so.$(LIB_VERSION) $(DESTDIR)$(prefix)/lib ++ cd $(DESTDIR)$(prefix)/lib; \ ++ ln -sf libgnatprj.so.$(LIB_VERSION) libgnatprj.so ++ mkdir -p $(DESTDIR)$(prefix)/share/ada/adainclude/gnatprj ++ $(INSTALL_DATA) $(SOURCES_TO_INSTALL) \ ++ $(DESTDIR)$(prefix)/share/ada/adainclude/gnatprj ++ mkdir -p $(DESTDIR)$(prefix)/lib/ada/adalib/gnatprj ++ $(INSTALL) -m 0444 obj-shared/*.ali \ ++ $(DESTDIR)$(prefix)/lib/ada/adalib/gnatprj ++ chmod a=r $(DESTDIR)$(prefix)/lib/ada/adalib/gnatprj/*.ali ++ ++.PHONY: clean ++clean: ++ rm -rf *.ali obj-static obj-shared libgnatprj* *.adb *.ads stamp* +Index: Makefile.def +=================================================================== +--- Makefile.def.orig ++++ Makefile.def +@@ -130,6 +130,13 @@ + missing= TAGS; + missing= install-info; + missing= installcheck; }; ++host_modules= { module= libgnatprj; no_check=true; ++ missing= info; ++ missing= dvi; ++ missing= html; ++ missing= TAGS; ++ missing= install-info; ++ missing= installcheck; }; + host_modules= { module= gnattools; no_check=true; + missing= info; + missing= dvi; +@@ -175,6 +182,13 @@ + missing= TAGS; + missing= install-info; + missing= installcheck; }; ++target_modules = { module= libgnatprj; no_check=true; ++ missing= info; ++ missing= dvi; ++ missing= html; ++ missing= TAGS; ++ missing= install-info; ++ missing= installcheck; }; + target_modules = { module= libgomp; lib_path=.libs; }; + + // These are (some of) the make targets to be done in each subdirectory. +@@ -346,7 +360,10 @@ + + dependencies = { module=all-gnattools; on=all-libada; }; + dependencies = { module=all-gnattools; on=all-libgnatvsn; }; ++dependencies = { module=all-gnattools; on=all-libgnatprj; }; + dependencies = { module=all-libgnatvsn; on=all-libada; }; ++dependencies = { module=all-libgnatprj; on=all-libada; }; ++dependencies = { module=all-libgnatprj; on=all-libgnatvsn; }; + + dependencies = { module=configure-mpfr; on=all-gmp; }; + +Index: Makefile.in +=================================================================== +--- Makefile.in.orig ++++ Makefile.in +@@ -699,6 +699,7 @@ + maybe-configure-utils \ + maybe-configure-libada \ + maybe-configure-libgnatvsn \ ++ maybe-configure-libgnatprj \ + maybe-configure-gnattools + .PHONY: configure-target + configure-target: \ +@@ -723,6 +724,7 @@ + maybe-configure-target-rda \ + maybe-configure-target-libada \ + maybe-configure-target-libgnatvsn \ ++ maybe-configure-target-libgnatprj \ + maybe-configure-target-libgomp + + # The target built for a native non-bootstrap build. +@@ -852,6 +854,7 @@ + all-host: maybe-all-utils + all-host: maybe-all-libada + all-host: maybe-all-libgnatvsn ++all-host: maybe-all-libgnatprj + all-host: maybe-all-gnattools + + .PHONY: all-target +@@ -879,6 +882,7 @@ + all-target: maybe-all-target-rda + all-target: maybe-all-target-libada + all-target: maybe-all-target-libgnatvsn ++all-target: maybe-all-target-libgnatprj + all-target: maybe-all-target-libgomp + + # Do a target for all the subdirectories. A ``make do-X'' will do a +@@ -968,6 +972,7 @@ + info-host: maybe-info-utils + info-host: maybe-info-libada + info-host: maybe-info-libgnatvsn ++info-host: maybe-info-libgnatprj + info-host: maybe-info-gnattools + + .PHONY: info-target +@@ -993,6 +998,7 @@ + info-target: maybe-info-target-rda + info-target: maybe-info-target-libada + info-target: maybe-info-target-libgnatvsn ++info-target: maybe-info-target-libgnatprj + info-target: maybe-info-target-libgomp + + .PHONY: do-dvi +@@ -1077,6 +1083,7 @@ + dvi-host: maybe-dvi-utils + dvi-host: maybe-dvi-libada + dvi-host: maybe-dvi-libgnatvsn ++dvi-host: maybe-dvi-libgnatprj + dvi-host: maybe-dvi-gnattools + + .PHONY: dvi-target +@@ -1102,6 +1109,7 @@ + dvi-target: maybe-dvi-target-rda + dvi-target: maybe-dvi-target-libada + dvi-target: maybe-dvi-target-libgnatvsn ++dvi-target: maybe-dvi-target-libgnatprj + dvi-target: maybe-dvi-target-libgomp + + .PHONY: do-pdf +@@ -1186,6 +1194,7 @@ + pdf-host: maybe-pdf-utils + pdf-host: maybe-pdf-libada + pdf-host: maybe-pdf-libgnatvsn ++pdf-host: maybe-pdf-libgnatprj + pdf-host: maybe-pdf-gnattools + + .PHONY: pdf-target +@@ -1211,6 +1220,7 @@ + pdf-target: maybe-pdf-target-rda + pdf-target: maybe-pdf-target-libada + pdf-target: maybe-pdf-target-libgnatvsn ++pdf-target: maybe-pdf-target-libgnatprj + pdf-target: maybe-pdf-target-libgomp + + .PHONY: do-html +@@ -1295,6 +1305,7 @@ + html-host: maybe-html-utils + html-host: maybe-html-libada + html-host: maybe-html-libgnatvsn ++html-host: maybe-html-libgnatprj + html-host: maybe-html-gnattools + + .PHONY: html-target +@@ -1320,6 +1331,7 @@ + html-target: maybe-html-target-rda + html-target: maybe-html-target-libada + html-target: maybe-html-target-libgnatvsn ++html-target: maybe-html-target-libgnatprj + html-target: maybe-html-target-libgomp + + .PHONY: do-TAGS +@@ -1404,6 +1416,7 @@ + TAGS-host: maybe-TAGS-utils + TAGS-host: maybe-TAGS-libada + TAGS-host: maybe-TAGS-libgnatvsn ++TAGS-host: maybe-TAGS-libgnatprj + TAGS-host: maybe-TAGS-gnattools + + .PHONY: TAGS-target +@@ -1429,6 +1442,7 @@ + TAGS-target: maybe-TAGS-target-rda + TAGS-target: maybe-TAGS-target-libada + TAGS-target: maybe-TAGS-target-libgnatvsn ++TAGS-target: maybe-TAGS-target-libgnatprj + TAGS-target: maybe-TAGS-target-libgomp + + .PHONY: do-install-info +@@ -1513,6 +1527,7 @@ + install-info-host: maybe-install-info-utils + install-info-host: maybe-install-info-libada + install-info-host: maybe-install-info-libgnatvsn ++install-info-host: maybe-install-info-libgnatprj + install-info-host: maybe-install-info-gnattools + + .PHONY: install-info-target +@@ -1538,6 +1553,7 @@ + install-info-target: maybe-install-info-target-rda + install-info-target: maybe-install-info-target-libada + install-info-target: maybe-install-info-target-libgnatvsn ++install-info-target: maybe-install-info-target-libgnatprj + install-info-target: maybe-install-info-target-libgomp + + .PHONY: do-install-pdf +@@ -1622,6 +1638,7 @@ + install-pdf-host: maybe-install-pdf-utils + install-pdf-host: maybe-install-pdf-libada + install-pdf-host: maybe-install-pdf-libgnatvsn ++install-pdf-host: maybe-install-pdf-libgnatprj + install-pdf-host: maybe-install-pdf-gnattools + + .PHONY: install-pdf-target +@@ -1647,6 +1664,7 @@ + install-pdf-target: maybe-install-pdf-target-rda + install-pdf-target: maybe-install-pdf-target-libada + install-pdf-target: maybe-install-pdf-target-libgnatvsn ++install-pdf-target: maybe-install-pdf-target-libgnatprj + install-pdf-target: maybe-install-pdf-target-libgomp + + .PHONY: do-install-html +@@ -1731,6 +1749,7 @@ + install-html-host: maybe-install-html-utils + install-html-host: maybe-install-html-libada + install-html-host: maybe-install-html-libgnatvsn ++install-html-host: maybe-install-html-libgnatprj + install-html-host: maybe-install-html-gnattools + + .PHONY: install-html-target +@@ -1756,6 +1775,7 @@ + install-html-target: maybe-install-html-target-rda + install-html-target: maybe-install-html-target-libada + install-html-target: maybe-install-html-target-libgnatvsn ++install-html-target: maybe-install-html-target-libgnatprj + install-html-target: maybe-install-html-target-libgomp + + .PHONY: do-installcheck +@@ -1840,6 +1860,7 @@ + installcheck-host: maybe-installcheck-utils + installcheck-host: maybe-installcheck-libada + installcheck-host: maybe-installcheck-libgnatvsn ++installcheck-host: maybe-installcheck-libgnatprj + installcheck-host: maybe-installcheck-gnattools + + .PHONY: installcheck-target +@@ -1865,6 +1886,7 @@ + installcheck-target: maybe-installcheck-target-rda + installcheck-target: maybe-installcheck-target-libada + installcheck-target: maybe-installcheck-target-libgnatvsn ++installcheck-target: maybe-installcheck-target-libgnatprj + installcheck-target: maybe-installcheck-target-libgomp + + .PHONY: do-mostlyclean +@@ -1949,6 +1971,7 @@ + mostlyclean-host: maybe-mostlyclean-utils + mostlyclean-host: maybe-mostlyclean-libada + mostlyclean-host: maybe-mostlyclean-libgnatvsn ++mostlyclean-host: maybe-mostlyclean-libgnatprj + mostlyclean-host: maybe-mostlyclean-gnattools + + .PHONY: mostlyclean-target +@@ -1974,6 +1997,7 @@ + mostlyclean-target: maybe-mostlyclean-target-rda + mostlyclean-target: maybe-mostlyclean-target-libada + mostlyclean-target: maybe-mostlyclean-target-libgnatvsn ++mostlyclean-target: maybe-mostlyclean-target-libgnatprj + mostlyclean-target: maybe-mostlyclean-target-libgomp + + .PHONY: do-clean +@@ -2058,6 +2082,7 @@ + clean-host: maybe-clean-utils + clean-host: maybe-clean-libada + clean-host: maybe-clean-libgnatvsn ++clean-host: maybe-clean-libgnatprj + clean-host: maybe-clean-gnattools + + .PHONY: clean-target +@@ -2083,6 +2108,7 @@ + clean-target: maybe-clean-target-rda + clean-target: maybe-clean-target-libada + clean-target: maybe-clean-target-libgnatvsn ++clean-target: maybe-clean-target-libgnatprj + clean-target: maybe-clean-target-libgomp + + .PHONY: do-distclean +@@ -2167,6 +2193,7 @@ + distclean-host: maybe-distclean-utils + distclean-host: maybe-distclean-libada + distclean-host: maybe-distclean-libgnatvsn ++distclean-host: maybe-distclean-libgnatprj + distclean-host: maybe-distclean-gnattools + + .PHONY: distclean-target +@@ -2192,6 +2219,7 @@ + distclean-target: maybe-distclean-target-rda + distclean-target: maybe-distclean-target-libada + distclean-target: maybe-distclean-target-libgnatvsn ++distclean-target: maybe-distclean-target-libgnatprj + distclean-target: maybe-distclean-target-libgomp + + .PHONY: do-maintainer-clean +@@ -2276,6 +2304,7 @@ + maintainer-clean-host: maybe-maintainer-clean-utils + maintainer-clean-host: maybe-maintainer-clean-libada + maintainer-clean-host: maybe-maintainer-clean-libgnatvsn ++maintainer-clean-host: maybe-maintainer-clean-libgnatprj + maintainer-clean-host: maybe-maintainer-clean-gnattools + + .PHONY: maintainer-clean-target +@@ -2301,6 +2330,7 @@ + maintainer-clean-target: maybe-maintainer-clean-target-rda + maintainer-clean-target: maybe-maintainer-clean-target-libada + maintainer-clean-target: maybe-maintainer-clean-target-libgnatvsn ++maintainer-clean-target: maybe-maintainer-clean-target-libgnatprj + maintainer-clean-target: maybe-maintainer-clean-target-libgomp + + +@@ -2439,6 +2469,7 @@ + maybe-check-utils \ + maybe-check-libada \ + maybe-check-libgnatvsn \ ++ maybe-check-libgnatprj \ + maybe-check-gnattools + + .PHONY: check-target +@@ -2464,6 +2495,7 @@ + maybe-check-target-rda \ + maybe-check-target-libada \ + maybe-check-target-libgnatvsn \ ++ maybe-check-target-libgnatprj \ + maybe-check-target-libgomp + + do-check: +@@ -2574,6 +2606,7 @@ + maybe-install-utils \ + maybe-install-libada \ + maybe-install-libgnatvsn \ ++ maybe-install-libgnatprj \ + maybe-install-gnattools + + .PHONY: install-host +@@ -2649,6 +2682,7 @@ + maybe-install-utils \ + maybe-install-libada \ + maybe-install-libgnatvsn \ ++ maybe-install-libgnatprj \ + maybe-install-gnattools + + .PHONY: install-target +@@ -2674,6 +2708,7 @@ + maybe-install-target-rda \ + maybe-install-target-libada \ + maybe-install-target-libgnatvsn \ ++ maybe-install-target-libgnatprj \ + maybe-install-target-libgomp + + uninstall: +@@ -39562,6 +39597,327 @@ + + + ++.PHONY: configure-libgnatprj maybe-configure-libgnatprj ++maybe-configure-libgnatprj: ++@if gcc-bootstrap ++configure-libgnatprj: stage_current ++@endif gcc-bootstrap ++@if libgnatprj ++maybe-configure-libgnatprj: configure-libgnatprj ++configure-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ test ! -f $(HOST_SUBDIR)/libgnatprj/Makefile || exit 0; \ ++ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgnatprj ; \ ++ $(HOST_EXPORTS) \ ++ echo Configuring in $(HOST_SUBDIR)/libgnatprj; \ ++ cd "$(HOST_SUBDIR)/libgnatprj" || exit 1; \ ++ case $(srcdir) in \ ++ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ ++ *) topdir=`echo $(HOST_SUBDIR)/libgnatprj/ | \ ++ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ ++ esac; \ ++ srcdiroption="--srcdir=$${topdir}/libgnatprj"; \ ++ libsrcdir="$$s/libgnatprj"; \ ++ $(SHELL) $${libsrcdir}/configure \ ++ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \ ++ --target=${target_alias} $${srcdiroption} \ ++ || exit 1 ++@endif libgnatprj ++ ++ ++ ++ ++ ++.PHONY: all-libgnatprj maybe-all-libgnatprj ++maybe-all-libgnatprj: ++@if gcc-bootstrap ++all-libgnatprj: stage_current ++@endif gcc-bootstrap ++@if libgnatprj ++TARGET-libgnatprj=all ++maybe-all-libgnatprj: all-libgnatprj ++all-libgnatprj: configure-libgnatprj ++ @: $(MAKE); $(unstage) ++ @r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(FLAGS_TO_PASS) $(TARGET-libgnatprj)) ++@endif libgnatprj ++ ++ ++ ++ ++.PHONY: check-libgnatprj maybe-check-libgnatprj ++maybe-check-libgnatprj: ++@if libgnatprj ++maybe-check-libgnatprj: check-libgnatprj ++ ++check-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: install-libgnatprj maybe-install-libgnatprj ++maybe-install-libgnatprj: ++@if libgnatprj ++maybe-install-libgnatprj: install-libgnatprj ++ ++install-libgnatprj: installdirs ++ @: $(MAKE); $(unstage) ++ @r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(FLAGS_TO_PASS) install) ++ ++@endif libgnatprj ++ ++# Other targets (info, dvi, pdf, etc.) ++ ++.PHONY: maybe-info-libgnatprj info-libgnatprj ++maybe-info-libgnatprj: ++@if libgnatprj ++maybe-info-libgnatprj: info-libgnatprj ++ ++# libgnatprj doesn't support info. ++info-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: maybe-dvi-libgnatprj dvi-libgnatprj ++maybe-dvi-libgnatprj: ++@if libgnatprj ++maybe-dvi-libgnatprj: dvi-libgnatprj ++ ++# libgnatprj doesn't support dvi. ++dvi-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: maybe-pdf-libgnatprj pdf-libgnatprj ++maybe-pdf-libgnatprj: ++@if libgnatprj ++maybe-pdf-libgnatprj: pdf-libgnatprj ++ ++pdf-libgnatprj: \ ++ configure-libgnatprj ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing pdf in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ pdf) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++.PHONY: maybe-html-libgnatprj html-libgnatprj ++maybe-html-libgnatprj: ++@if libgnatprj ++maybe-html-libgnatprj: html-libgnatprj ++ ++# libgnatprj doesn't support html. ++html-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: maybe-TAGS-libgnatprj TAGS-libgnatprj ++maybe-TAGS-libgnatprj: ++@if libgnatprj ++maybe-TAGS-libgnatprj: TAGS-libgnatprj ++ ++# libgnatprj doesn't support TAGS. ++TAGS-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: maybe-install-info-libgnatprj install-info-libgnatprj ++maybe-install-info-libgnatprj: ++@if libgnatprj ++maybe-install-info-libgnatprj: install-info-libgnatprj ++ ++# libgnatprj doesn't support install-info. ++install-info-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: maybe-install-pdf-libgnatprj install-pdf-libgnatprj ++maybe-install-pdf-libgnatprj: ++@if libgnatprj ++maybe-install-pdf-libgnatprj: install-pdf-libgnatprj ++ ++install-pdf-libgnatprj: \ ++ configure-libgnatprj \ ++ pdf-libgnatprj ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing install-pdf in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ install-pdf) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++.PHONY: maybe-install-html-libgnatprj install-html-libgnatprj ++maybe-install-html-libgnatprj: ++@if libgnatprj ++maybe-install-html-libgnatprj: install-html-libgnatprj ++ ++install-html-libgnatprj: \ ++ configure-libgnatprj \ ++ html-libgnatprj ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing install-html in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ install-html) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++.PHONY: maybe-installcheck-libgnatprj installcheck-libgnatprj ++maybe-installcheck-libgnatprj: ++@if libgnatprj ++maybe-installcheck-libgnatprj: installcheck-libgnatprj ++ ++# libgnatprj doesn't support installcheck. ++installcheck-libgnatprj: ++ ++@endif libgnatprj ++ ++.PHONY: maybe-mostlyclean-libgnatprj mostlyclean-libgnatprj ++maybe-mostlyclean-libgnatprj: ++@if libgnatprj ++maybe-mostlyclean-libgnatprj: mostlyclean-libgnatprj ++ ++mostlyclean-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing mostlyclean in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ mostlyclean) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++.PHONY: maybe-clean-libgnatprj clean-libgnatprj ++maybe-clean-libgnatprj: ++@if libgnatprj ++maybe-clean-libgnatprj: clean-libgnatprj ++ ++clean-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing clean in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ clean) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++.PHONY: maybe-distclean-libgnatprj distclean-libgnatprj ++maybe-distclean-libgnatprj: ++@if libgnatprj ++maybe-distclean-libgnatprj: distclean-libgnatprj ++ ++distclean-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing distclean in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ distclean) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++.PHONY: maybe-maintainer-clean-libgnatprj maintainer-clean-libgnatprj ++maybe-maintainer-clean-libgnatprj: ++@if libgnatprj ++maybe-maintainer-clean-libgnatprj: maintainer-clean-libgnatprj ++ ++maintainer-clean-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f ./libgnatprj/Makefile ] || exit 0; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(HOST_EXPORTS) \ ++ for flag in $(EXTRA_HOST_FLAGS) ; do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ echo "Doing maintainer-clean in libgnatprj" ; \ ++ (cd $(HOST_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ maintainer-clean) \ ++ || exit 1 ++ ++@endif libgnatprj ++ ++ ++ + .PHONY: configure-gnattools maybe-configure-gnattools + maybe-configure-gnattools: + @if gcc-bootstrap +@@ -49480,6 +49836,345 @@ + + + ++.PHONY: configure-target-libgnatprj maybe-configure-target-libgnatprj ++maybe-configure-target-libgnatprj: ++@if gcc-bootstrap ++configure-target-libgnatprj: stage_current ++@endif gcc-bootstrap ++@if target-libgnatprj ++maybe-configure-target-libgnatprj: configure-target-libgnatprj ++configure-target-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ echo "Checking multilib configuration for libgnatprj..."; \ ++ $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgnatprj ; \ ++ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgnatprj/multilib.tmp 2> /dev/null ; \ ++ if test -r $(TARGET_SUBDIR)/libgnatprj/multilib.out; then \ ++ if cmp -s $(TARGET_SUBDIR)/libgnatprj/multilib.tmp $(TARGET_SUBDIR)/libgnatprj/multilib.out; then \ ++ rm -f $(TARGET_SUBDIR)/libgnatprj/multilib.tmp; \ ++ else \ ++ rm -f $(TARGET_SUBDIR)/libgnatprj/Makefile; \ ++ mv $(TARGET_SUBDIR)/libgnatprj/multilib.tmp $(TARGET_SUBDIR)/libgnatprj/multilib.out; \ ++ fi; \ ++ else \ ++ mv $(TARGET_SUBDIR)/libgnatprj/multilib.tmp $(TARGET_SUBDIR)/libgnatprj/multilib.out; \ ++ fi; \ ++ test ! -f $(TARGET_SUBDIR)/libgnatprj/Makefile || exit 0; \ ++ $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgnatprj ; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo Configuring in $(TARGET_SUBDIR)/libgnatprj; \ ++ cd "$(TARGET_SUBDIR)/libgnatprj" || exit 1; \ ++ case $(srcdir) in \ ++ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ ++ *) topdir=`echo $(TARGET_SUBDIR)/libgnatprj/ | \ ++ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ ++ esac; \ ++ srcdiroption="--srcdir=$${topdir}/libgnatprj"; \ ++ libsrcdir="$$s/libgnatprj"; \ ++ rm -f no-such-file || : ; \ ++ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ ++ $(TARGET_CONFIGARGS) --build=${build_alias} --host=${target_alias} \ ++ --target=${target_alias} $${srcdiroption} \ ++ || exit 1 ++@endif target-libgnatprj ++ ++ ++ ++ ++ ++.PHONY: all-target-libgnatprj maybe-all-target-libgnatprj ++maybe-all-target-libgnatprj: ++@if gcc-bootstrap ++all-target-libgnatprj: stage_current ++@endif gcc-bootstrap ++@if target-libgnatprj ++TARGET-target-libgnatprj=all ++maybe-all-target-libgnatprj: all-target-libgnatprj ++all-target-libgnatprj: configure-target-libgnatprj ++ @: $(MAKE); $(unstage) ++ @r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(TARGET_FLAGS_TO_PASS) $(TARGET-target-libgnatprj)) ++@endif target-libgnatprj ++ ++ ++ ++ ++ ++.PHONY: check-target-libgnatprj maybe-check-target-libgnatprj ++maybe-check-target-libgnatprj: ++@if target-libgnatprj ++maybe-check-target-libgnatprj: check-target-libgnatprj ++ ++# Dummy target for uncheckable module. ++check-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: install-target-libgnatprj maybe-install-target-libgnatprj ++maybe-install-target-libgnatprj: ++@if target-libgnatprj ++maybe-install-target-libgnatprj: install-target-libgnatprj ++ ++install-target-libgnatprj: installdirs ++ @: $(MAKE); $(unstage) ++ @r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) ++ ++@endif target-libgnatprj ++ ++# Other targets (info, dvi, pdf, etc.) ++ ++.PHONY: maybe-info-target-libgnatprj info-target-libgnatprj ++maybe-info-target-libgnatprj: ++@if target-libgnatprj ++maybe-info-target-libgnatprj: info-target-libgnatprj ++ ++# libgnatprj doesn't support info. ++info-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-dvi-target-libgnatprj dvi-target-libgnatprj ++maybe-dvi-target-libgnatprj: ++@if target-libgnatprj ++maybe-dvi-target-libgnatprj: dvi-target-libgnatprj ++ ++# libgnatprj doesn't support dvi. ++dvi-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-pdf-target-libgnatprj pdf-target-libgnatprj ++maybe-pdf-target-libgnatprj: ++@if target-libgnatprj ++maybe-pdf-target-libgnatprj: pdf-target-libgnatprj ++ ++pdf-target-libgnatprj: \ ++ configure-target-libgnatprj ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing pdf in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ pdf) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-html-target-libgnatprj html-target-libgnatprj ++maybe-html-target-libgnatprj: ++@if target-libgnatprj ++maybe-html-target-libgnatprj: html-target-libgnatprj ++ ++# libgnatprj doesn't support html. ++html-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-TAGS-target-libgnatprj TAGS-target-libgnatprj ++maybe-TAGS-target-libgnatprj: ++@if target-libgnatprj ++maybe-TAGS-target-libgnatprj: TAGS-target-libgnatprj ++ ++# libgnatprj doesn't support TAGS. ++TAGS-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-install-info-target-libgnatprj install-info-target-libgnatprj ++maybe-install-info-target-libgnatprj: ++@if target-libgnatprj ++maybe-install-info-target-libgnatprj: install-info-target-libgnatprj ++ ++# libgnatprj doesn't support install-info. ++install-info-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-install-pdf-target-libgnatprj install-pdf-target-libgnatprj ++maybe-install-pdf-target-libgnatprj: ++@if target-libgnatprj ++maybe-install-pdf-target-libgnatprj: install-pdf-target-libgnatprj ++ ++install-pdf-target-libgnatprj: \ ++ configure-target-libgnatprj \ ++ pdf-target-libgnatprj ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing install-pdf in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ install-pdf) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-install-html-target-libgnatprj install-html-target-libgnatprj ++maybe-install-html-target-libgnatprj: ++@if target-libgnatprj ++maybe-install-html-target-libgnatprj: install-html-target-libgnatprj ++ ++install-html-target-libgnatprj: \ ++ configure-target-libgnatprj \ ++ html-target-libgnatprj ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing install-html in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ install-html) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-installcheck-target-libgnatprj installcheck-target-libgnatprj ++maybe-installcheck-target-libgnatprj: ++@if target-libgnatprj ++maybe-installcheck-target-libgnatprj: installcheck-target-libgnatprj ++ ++# libgnatprj doesn't support installcheck. ++installcheck-target-libgnatprj: ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-mostlyclean-target-libgnatprj mostlyclean-target-libgnatprj ++maybe-mostlyclean-target-libgnatprj: ++@if target-libgnatprj ++maybe-mostlyclean-target-libgnatprj: mostlyclean-target-libgnatprj ++ ++mostlyclean-target-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ mostlyclean) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-clean-target-libgnatprj clean-target-libgnatprj ++maybe-clean-target-libgnatprj: ++@if target-libgnatprj ++maybe-clean-target-libgnatprj: clean-target-libgnatprj ++ ++clean-target-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing clean in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ clean) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-distclean-target-libgnatprj distclean-target-libgnatprj ++maybe-distclean-target-libgnatprj: ++@if target-libgnatprj ++maybe-distclean-target-libgnatprj: distclean-target-libgnatprj ++ ++distclean-target-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing distclean in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ distclean) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++.PHONY: maybe-maintainer-clean-target-libgnatprj maintainer-clean-target-libgnatprj ++maybe-maintainer-clean-target-libgnatprj: ++@if target-libgnatprj ++maybe-maintainer-clean-target-libgnatprj: maintainer-clean-target-libgnatprj ++ ++maintainer-clean-target-libgnatprj: ++ @: $(MAKE); $(unstage) ++ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ ++ r=`${PWD_COMMAND}`; export r; \ ++ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ ++ $(NORMAL_TARGET_EXPORTS) \ ++ echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgnatprj" ; \ ++ for flag in $(EXTRA_TARGET_FLAGS); do \ ++ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ ++ done; \ ++ (cd $(TARGET_SUBDIR)/libgnatprj && \ ++ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ ++ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ ++ "RANLIB=$${RANLIB}" \ ++ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ ++ maintainer-clean) \ ++ || exit 1 ++ ++@endif target-libgnatprj ++ ++ ++ ++ ++ + .PHONY: configure-target-libgomp maybe-configure-target-libgomp + maybe-configure-target-libgomp: + @if gcc-bootstrap +@@ -52030,6 +52725,7 @@ + configure-target-rda: stage_last + configure-target-libada: stage_last + configure-target-libgnatvsn: stage_last ++configure-target-libgnatprj: stage_last + configure-target-libgomp: stage_last + @endif gcc-bootstrap + +@@ -52055,6 +52751,7 @@ + configure-target-rda: maybe-all-gcc + configure-target-libada: maybe-all-gcc + configure-target-libgnatvsn: maybe-all-gcc ++configure-target-libgnatprj: maybe-all-gcc + configure-target-libgomp: maybe-all-gcc + @endif gcc-no-bootstrap + +@@ -52310,7 +53007,10 @@ + all-fixincludes: maybe-all-libiberty + all-gnattools: maybe-all-libada + all-gnattools: maybe-all-libgnatvsn ++all-gnattools: maybe-all-libgnatprj + all-libgnatvsn: maybe-all-libada ++all-libgnatprj: maybe-all-libada ++all-libgnatprj: maybe-all-libgnatvsn + configure-mpfr: maybe-all-gmp + + configure-stage1-mpfr: maybe-all-stage1-gmp +@@ -52749,6 +53449,7 @@ + configure-target-rda: maybe-all-target-libgcc + configure-target-libada: maybe-all-target-libgcc + configure-target-libgnatvsn: maybe-all-target-libgcc ++configure-target-libgnatprj: maybe-all-target-libgcc + configure-target-libgomp: maybe-all-target-libgcc + @endif gcc-no-bootstrap + +@@ -52793,6 +53494,8 @@ + + configure-target-libgnatvsn: maybe-all-target-newlib maybe-all-target-libgloss + ++configure-target-libgnatprj: maybe-all-target-newlib maybe-all-target-libgloss ++ + configure-target-libgomp: maybe-all-target-newlib maybe-all-target-libgloss + + +Index: configure.ac +=================================================================== +--- configure.ac.orig ++++ configure.ac +@@ -155,7 +155,7 @@ + + # these libraries are used by various programs built for the host environment + # +-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr libada libgnatvsn" ++host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr libada libgnatvsn libgnatprj" + + # these tools are built for the host environment + # Note, the powerpc-eabi build depends on sim occurring before gdb in order to +@@ -186,7 +186,8 @@ + ${libgcj} \ + target-libobjc \ + target-libada \ +- target-libgnatvsn" ++ target-libgnatvsn \ ++ target-libgnatprj" + + # these tools are built using the target libraries, and are intended to + # run only in the target environment +@@ -264,7 +265,7 @@ + + # Similarly, some are only suitable for cross toolchains. + # Remove these if host=target. +-cross_only="target-libgloss target-newlib target-opcodes target-libada target-libgnatvsn" ++cross_only="target-libgloss target-newlib target-opcodes target-libada target-libgnatvsn target-libgnatprj" + + case $is_cross_compiler in + no) skipdirs="${skipdirs} ${cross_only}" ;; +@@ -341,7 +342,7 @@ + ENABLE_LIBADA=$enableval, + ENABLE_LIBADA=yes) + if test "${ENABLE_LIBADA}" != "yes" ; then +- noconfigdirs="$noconfigdirs libgnatvsn gnattools" ++ noconfigdirs="$noconfigdirs libgnatvsn libgnatprj gnattools" + fi + + AC_ARG_ENABLE(libssp, +Index: libgnatprj/configure.ac +=================================================================== +--- /dev/null ++++ libgnatprj/configure.ac +@@ -0,0 +1,144 @@ ++# Configure script for libada. ++# Copyright 2003, 2004 Free Software Foundation, Inc. ++# ++# This file is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ ++AC_INIT ++AC_PREREQ([2.59]) ++ ++AC_CONFIG_SRCDIR([Makefile.in]) ++ ++# Start of actual configure tests ++ ++AC_PROG_INSTALL ++ ++AC_CANONICAL_BUILD ++AC_CANONICAL_HOST ++AC_CANONICAL_TARGET ++ ++sinclude(../config/acx.m4) ++ACX_NONCANONICAL_TARGET ++ ++# Need to pass this down for now :-P ++AC_PROG_LN_S ++ ++# Determine x_ada_cflags ++case $host in ++ hppa*) x_ada_cflags=-mdisable-indexing ;; ++ *) x_ada_cflags= ;; ++esac ++AC_SUBST([x_ada_cflags]) ++ ++# Determine what to build for 'gnattools' ++if test $build = $target ; then ++ # Note that build=target is almost certainly the wrong test; FIXME ++ default_gnattools_target="gnattools-native" ++else ++ default_gnattools_target="gnattools-cross" ++fi ++AC_SUBST([default_gnattools_target]) ++ ++# Target-specific stuff (defaults) ++TOOLS_TARGET_PAIRS= ++AC_SUBST(TOOLS_TARGET_PAIRS) ++ ++# Per-target case statement ++# ------------------------- ++case "${target}" in ++ alpha*-dec-vx*) # Unlike all other Vxworks ++ ;; ++ m68k*-wrs-vx* \ ++ | powerpc*-wrs-vxworks \ ++ | sparc*-wrs-vx* \ ++ | *86-wrs-vxworks \ ++ | xscale*-wrs-vx* \ ++ | xscale*-wrs-coff \ ++ | mips*-wrs-vx*) ++ TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb