From 41019c38e9fb5ebd296106e3edeb391b8e323115 Mon Sep 17 00:00:00 2001 From: Florian Boor Date: Fri, 10 Sep 2010 19:06:18 +0200 Subject: linux: Add 2.6.28 patches and config for Mini6410. --- recipes/linux/linux-2.6.28/mini6410/defconfig | 1716 + recipes/linux/linux-2.6.28/mini6410/mini6410.patch | 192017 ++++++++++++++++++ .../linux/linux-2.6.28/mini6410/undefined.patch | 11 + 3 files changed, 193744 insertions(+) create mode 100644 recipes/linux/linux-2.6.28/mini6410/defconfig create mode 100644 recipes/linux/linux-2.6.28/mini6410/mini6410.patch create mode 100644 recipes/linux/linux-2.6.28/mini6410/undefined.patch (limited to 'recipes/linux/linux-2.6.28/mini6410') diff --git a/recipes/linux/linux-2.6.28/mini6410/defconfig b/recipes/linux/linux-2.6.28/mini6410/defconfig new file mode 100644 index 0000000000..45cd4f9d9a --- /dev/null +++ b/recipes/linux/linux-2.6.28/mini6410/defconfig @@ -0,0 +1,1716 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28.6 +# Fri Sep 10 15:29:39 2010 +# +CONFIG_ARM=y +# CONFIG_HAVE_PWM is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +CONFIG_ARCH_S3C64XX=y +# CONFIG_ARCH_S5P64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +CONFIG_PLAT_S3C64XX=y +CONFIG_CPU_S3C6400_INIT=y +CONFIG_CPU_S3C6400_CLOCK=y +CONFIG_S3C64XX_SETUP_I2C0=y +# CONFIG_S3C64XX_ADC is not set +CONFIG_S3C64XX_DEV_FIMC0=y +CONFIG_S3C64XX_DEV_FIMC1=y +CONFIG_S3C64XX_SETUP_FIMC0=y +CONFIG_S3C64XX_SETUP_FIMC1=y +# CONFIG_S3C6410_PWM is not set +CONFIG_NONE_PWM=y +CONFIG_PLAT_S3C=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_WATCHDOG is not set +CONFIG_S3C_BOOT_ERROR_RESET=y + +# +# Power management +# +# CONFIG_S3C2410_PM_DEBUG is not set +# CONFIG_S3C2410_PM_CHECK is not set +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +# CONFIG_SPLIT_ROOT_FILESYSTEM is not set +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HSMMC2=y +CONFIG_S3C_DMA_PL080=y +CONFIG_CPU_S3C6410=y +CONFIG_S3C6410_SETUP_SDHCI=y +CONFIG_MACH_SMDK6410=y + +# +# SMDK6410 MMC/SD slot setup +# +CONFIG_SMDK6410_SD_CH0=y +# CONFIG_SMDK6410_SD_CH1 is not set +# CONFIG_SMDK6410_SD_CH2 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_VIC=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=200 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_S3C=y +# CONFIG_MTD_NAND_S3C_DEBUG is not set +CONFIG_MTD_NAND_S3C_HWECC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_S3C=y +# CONFIG_TOUCHSCREEN_NEW is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +CONFIG_LEDS_MINI6410=y +CONFIG_MINI6410_HELLO_MODULE=m +CONFIG_MINI6410_BUTTONS=y +CONFIG_MINI6410_BUZZER=y +# CONFIG_MINI6410_ADC is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C6400=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_S3C_MEM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_S3C2410=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_S3C2410_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_VMALLOC=y +CONFIG_VIDEO_IR=y +CONFIG_VIDEO_TVEEPROM=y +CONFIG_VIDEO_TUNER=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_FIXED_MINOR_RANGES=y +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +CONFIG_VIDEO_IR_I2C=y + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +CONFIG_VIDEO_MSP3400=y +# CONFIG_VIDEO_CS5345 is not set +CONFIG_VIDEO_CS53L32A=y +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +CONFIG_VIDEO_WM8775=y +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +CONFIG_VIDEO_SAA711X=y +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +CONFIG_VIDEO_CX25840=y + +# +# MPEG video encoders +# +CONFIG_VIDEO_CX2341X=y + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=y +CONFIG_USB_M5602=y +CONFIG_USB_GSPCA_CONEX=y +CONFIG_USB_GSPCA_ETOMS=y +CONFIG_USB_GSPCA_FINEPIX=y +CONFIG_USB_GSPCA_MARS=y +CONFIG_USB_GSPCA_OV519=y +CONFIG_USB_GSPCA_PAC207=y +CONFIG_USB_GSPCA_PAC7311=y +CONFIG_USB_GSPCA_SONIXB=y +CONFIG_USB_GSPCA_SONIXJ=y +CONFIG_USB_GSPCA_SPCA500=y +CONFIG_USB_GSPCA_SPCA501=y +CONFIG_USB_GSPCA_SPCA505=y +CONFIG_USB_GSPCA_SPCA506=y +CONFIG_USB_GSPCA_SPCA508=y +CONFIG_USB_GSPCA_SPCA561=y +CONFIG_USB_GSPCA_STK014=y +CONFIG_USB_GSPCA_SUNPLUS=y +CONFIG_USB_GSPCA_T613=y +CONFIG_USB_GSPCA_TV8532=y +CONFIG_USB_GSPCA_VC032X=y +CONFIG_USB_GSPCA_ZC3XX=y +CONFIG_VIDEO_PVRUSB2=y +CONFIG_VIDEO_PVRUSB2_SYSFS=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_EM28XX=y +# CONFIG_VIDEO_EM28XX_ALSA is not set +CONFIG_VIDEO_USBVISION=y +CONFIG_USB_ET61X251=y +CONFIG_USB_SN9C102=y +CONFIG_USB_ZC0301=y +CONFIG_USB_ZR364XX=y +CONFIG_USB_STKWEBCAM=y +CONFIG_USB_S2255=y +CONFIG_VIDEO_SAMSUNG=y + +# +# FIMC configurations +# +CONFIG_VIDEO_FIMC=y +CONFIG_VIDEO_FIMC_DEBUG=y +# CONFIG_S5K4BA is not set +# CONFIG_S5K3BA is not set +CONFIG_OV965X=y +CONFIG_OV965X_VGA=y +# CONFIG_OV965X_QVGA is not set +# CONFIG_OV965X_SVGA is not set +# CONFIG_OV965X_SXGA is not set +CONFIG_VIDEO_FIMC_CAM_CH=0 +CONFIG_VIDEO_FIMC_CAM_RESET=1 +CONFIG_VIDEO_POST=y +CONFIG_VIDEO_MFC10=y +CONFIG_VIDEO_MFC_DEBUG=y +CONFIG_VIDEO_JPEG=y +CONFIG_VIDEO_TV=y +CONFIG_VIDEO_ROTATOR=y +CONFIG_VIDEO_G2D=y +CONFIG_VIDEO_G3D=y +CONFIG_VIDEO_CMM=y + +# +# Reserved memory configurations +# +CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC=15360 +CONFIG_VIDEO_SAMSUNG_MEMSIZE_POST=8192 +CONFIG_VIDEO_SAMSUNG_MEMSIZE_TV=8192 +CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC=6144 +CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG=8192 +CONFIG_VIDEO_SAMSUNG_MEMSIZE_CMM=8192 +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_S3C=y +CONFIG_FB_S3C_TFT480272=y +# CONFIG_FB_S3C_TFT800480 is not set +# CONFIG_FB_S3C_T240320 is not set +# CONFIG_FB_S3C_TFT640480 is not set +# CONFIG_FB_S3C_VGA1024768 is not set +# CONFIG_FB_S3C_VGA800600 is not set +# CONFIG_FB_S3C_VGA640480 is not set +# CONFIG_FB_S3C_EZVGA800600 is not set +CONFIG_FB_S3C_BPP=y +# CONFIG_FB_S3C_BPP_8 is not set +CONFIG_FB_S3C_BPP_16=y +# CONFIG_FB_S3C_BPP_24 is not set +# CONFIG_FB_S3C_BPP_28 is not set +# CONFIG_FB_S3C_BPP_32 is not set +CONFIG_FB_S3C_NUM=4 +# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set +CONFIG_FB_S3C_DOUBLE_BUFFERING=y +# CONFIG_FB_S1D13XXX is not set +CONFIG_BACKLIGHT_FRIENDLY_ARM=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224 is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y + +# +# SoC Audio for the Samsung S3C +# +CONFIG_SND_S3C64XX_SOC=y +CONFIG_SND_S3C64XX_SOC_SMDK6410_WM9713=y +# CONFIG_SOUND_WM9713_INPUT_STREAM_LINE is not set +CONFIG_SOUND_WM9713_INPUT_STREAM_MIC=y +CONFIG_SND_S3C6410_SOC_AC97=y +# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8580 is not set +# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8990 is not set +# CONFIG_SND_S3C64XX_SOC_SMDK6410_S5M8751 is not set +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM9713=y +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_COMPAT is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_S3C_OTG_HOST is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_S3C_OTGD=y +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set + +# +# NOTE: S3C OTG device role enables the controller driver below +# +CONFIG_USB_S3C_OTGD=y +CONFIG_USB_GADGET_S3C_OTGD_DMA_MODE=y +# CONFIG_USB_GADGET_S3C_OTGD_SLAVE_MODE is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_S3C=y +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=936 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +CONFIG_NLS_CODEPAGE_936=y +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_S3C_UART=0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/recipes/linux/linux-2.6.28/mini6410/mini6410.patch b/recipes/linux/linux-2.6.28/mini6410/mini6410.patch new file mode 100644 index 0000000000..a9c908b5b6 --- /dev/null +++ b/recipes/linux/linux-2.6.28/mini6410/mini6410.patch @@ -0,0 +1,192017 @@ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/ChangeLog linux-2.6.28.6/ChangeLog +--- linux-2.6.28/ChangeLog 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/ChangeLog 2009-04-30 10:05:47.000000000 +0200 +@@ -0,0 +1,2178 @@ ++previous samsung-ap-2.6 repository ChangeLog_s3c64xx for s3c64xx branch ++----------------------------------------------------------------------- ++rel-0-0-0 : Kwanghyun La (Nov.10.2008) ++ It's not fixed version , just only initial copy version for ++ estimation. ++ ++dev-0-0-1 : Ilho Lee ++dev-0-0-2 : Ilho Lee ++ Touchscreen D/D added, but Ethernet D/D is being adding. ++ ++dev-0-0-3 : Jongpill Lee ++ Support ADC driver and merge adc-s3c64xx.c and adc-s3c24xx.c file ++ ++ Removed Files: ++ R A arch/arm/plat-s3c64xx/adc-s3c64xx.c ++ ++ Added Files: ++ A arch/arm/plat-s3c/adc.c ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/adc.h ++ M drivers/char/Kconfig ++ ++dev-0-0-4 : Jongpill Lee ++ Bug fixed on ADC driver ++ ++ Modified Files: ++ M arch/arm/plat-s3c/adc.c ++ ++dev-0-0-5 : Ilho Lee ++ SMC9115 ethernet D/D is working(small_root only) ++ ++dev-0-0-6: Jinsung Yang ++ - NAND driver support ++ ++ Added files: ++ A arch/arm/configs/smdk6410mtd_defconfig ++ A arch/arm/plat-s3c/include/plat/partition.h ++ A drivers/mtd/nand/s3c_nand.c ++ ++ Modified files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/nand.h ++ M arch/arm/plat-s3c/include/plat/regs-nand.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/mtd/nand/Kconfig ++ M drivers/mtd/nand/Makefile ++ ++dev-0-0-7: Sungjun Bae ++ - I2S WM8580, I2SWM8990 Complete. ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h include/sound/soc.h ++ M sound/soc/soc-core.c sound/soc/codecs/wm8580.c sound/soc/codecs/wm8990.c ++ ++dev-0-0-8: Sungjun Bae ++ - DMA File Structure was changed. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ M arch/arm/plat-s3c64xx/Makefile ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl080.c ++ Removed Files: ++ R arch/arm/plat-s3c64xx/dma-pl080.c ++ ++dev-0-0-9: Ilho Lee ++ - PL330 DMA D/D file added ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/Kconfig ++ ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl330.c ++ A arch/arm/plat-s3c/dma-pl330-microcode.c ++ ++ ++dev-0-0-10: eyryu ++ - Add SMDKC100 initial. ++ ++dev-0-0-11: Ilho Lee ++ - DMA definition files changed ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ ++dev-0-0-12: Jinsung Yang ++ - gpiolib support for s5pc1xx architecture ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h ++ M arch/arm/mach-s5pc100/include/mach/gpio.h ++ M arch/arm/plat-s3c/gpio-config.c ++ M arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/gpiolib.c ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-b.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-c.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-d.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-i.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j4.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp00.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp01.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp02.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp03.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp04.h ++ ++dev-0-0-13: eyryu ++ - Add SMDKC100 clock & serial ++ ++dev-0-0-14: Ilho Lee ++ - ADC D/D added ++ ++ Added Files: ++ A arch/arm/plat-s3c24xx/adc.c ++ A arch/arm/plat-s3c64xx/adc.c ++ ++dev-0-0-15: eyryu ++ - Support SMDKC100 UART driver ++ - Add SMDKC100 clock & serial ++ ++rel-1-0-0: Kyoungil Kim ++ - Official Release (08.11.27) ++ ++dev-1-0-0: Kyoungil Kim ++ ++dev-1-0-1: Ilho Lee ++ - CPU idle added ++ ++ Added Files: ++ A arch/arm/mach-s3c6400/idle.h ++ A arch/arm/mach-s5pc100/idle.h ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s5pc100/cpu.c ++ ++dev-1-0-2: Ilho Lee ++ - S3C24XX -> S3C changed in the S3C DMA D/D. ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ M arch/arm/plat-s3c/dma-pl080.c ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/include/plat/s3c-dma.h ++ ++dev-1-0-3: Ilho Lee ++ - PL330 DMA D/D is adding.. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/dma-pl330-mcode.h ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ ++dev-1-0-4: Byungjae Lee ++ - Support File Storage Gadget for SMDK6410 HS USB OTG ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/Makefile ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/gadget_chips.h ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-otg.h ++ A drivers/usb/gadget/s3c_udc.h ++ A drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-5: Ilho Lee ++ - S3C touchscreen D/D changed. ++ ++ Modified Files: ++ M drivers/input/touchscreen/s3c-ts.c ++ ++dev-1-0-6: Jinsung Yang ++ - Clock system support for S5PC100 ++ ++ Modified files: ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M arch/arm/plat-s5pc1xx/include/plat/pll.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ ++dev-1-0-7: Jinsung Yang ++ - LCD (LTE480WV) support for SMDKC100 ++ ++ Modified files: ++ drivers/video/samsung/s5pfb_fimd5x.c ++ ++dev-1-0-8: Byungjae Lee ++ - Masked HCLK for USB OTG at register clocks ++ ++ Modified files: ++ M arch/arm/plat-s3c64xx/clock.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-9: Ilho Lee ++ - Ext-interrupts handlers added. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-10: Ilho Lee ++ - SMC9115 ethernet(100Mbps) D/D ported. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-11: Ilho Lee ++ - dev-adc.c deleted. ++ ++ Deleted Files: ++ D arch/arm/plat-s3c/dev-adc.c ++ ++rel-1-0-1: Kyoungil Kim ++ - Git Release (08.12.09) ++ ++v2.6.28-rc7-s3c64xx-r0d0: Kyoungil Kim ++ - s3c64xx rc7 initial git tag ++ ++v2.6.28-rc8-s3c64xx: Kyoungil Kim ++ - s3c64xx rc8 patch ++ ++v2.6.28-rc8-s3c64xx-r0d0: Kyoungil Kim ++ ++v2.6.28-rc8-s3c64xx-r0d1: Jinsung Yang ++ - Fix for wrong comments ++ ++v2.6.28-rc8-s3c64xx-r0d2: Jongpill Lee ++ ++ - bug fixed about OS Timer ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/cpu.h ++ M arch/arm/plat-s3c/include/plat/regs-timer.h ++ M arch/arm/plat-s3c/time.c ++ M arch/arm/plat-s3c24xx/include/plat/cpu.h ++ ++v2.6.28-rc8-s3c64xx-r0d3: Jongpill Lee ++ - Remove adc driver on s3c24xx ++ Modified Files: ++ M arch/arm/plat-s3c24xx/Kconfig ++ M arch/arm/plat-s3c24xx/Makefile ++ Deleted Files: ++ D arch/arm/plat-s3c24xx/adc.c ++ ++v2.6.28-rc8-s3c64xx-r0d4: Jinsung Yang ++ - 24 bit logo display support ++ - s3c framebuffer driver naming rule changes ++ ++ Modified files: ++ M drivers/video/cfbimgblt.c ++ M drivers/video/samsung/s3cfb.c ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_fimd4x.c ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ M drivers/video/samsung/s3cfb_lte480wv.c ++ M drivers/video/samsung/s3cfb_lts222qv.c ++ M drivers/video/samsung/s3cfb_ltv350qv.c ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s3c64xx-r0d5: Jongpill Lee ++ -Support cpu freq on smdk6410 ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/s3c64xx-cpufreq.carch/arm/plat-s3c64xx/s3c64xx-cpufreq.c ++ Modified Files: ++ M arch/arm/Kconfig ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c64xx/Makefile ++ ++v2.6.28-rc8-s3c64xx-r0d6: Kyoungil Kim ++ - split plat-s5p64xx, mach-s5p6440 ++ - Support for s5p6440 serial ++ ++ Added Files ++ A arch/arm/configs/smdk6440ramdisk_defconfig ++ A arch/arm/mach-s5p6440/Kconfig ++ A arch/arm/mach-s5p6440/Makefile.boot ++ A arch/arm/mach-s5p6440/cpu.c ++ A arch/arm/mach-s5p6440/dma.c ++ A arch/arm/mach-s5p6440/include/mach/debug-macro.S ++ A arch/arm/mach-s5p6440/include/mach/dma.h ++ A arch/arm/mach-s5p6440/include/mach/entry-macro.S ++ A arch/arm/mach-s5p6440/include/mach/gpio-core.h ++ A arch/arm/mach-s5p6440/include/mach/gpio.h ++ A arch/arm/mach-s5p6440/include/mach/hardware.h ++ A arch/arm/mach-s5p6440/include/mach/idle.h ++ A arch/arm/mach-s5p6440/include/mach/irqs.h ++ A arch/arm/mach-s5p6440/include/mach/map.h ++ A arch/arm/mach-s5p6440/include/mach/memory.h ++ A arch/arm/mach-s5p6440/include/mach/regs-irq.h ++ A arch/arm/mach-s5p6440/include/mach/regs-mem.h ++ A arch/arm/mach-s5p6440/include/mach/system.h ++ A arch/arm/mach-s5p6440/include/mach/tick.h ++ A arch/arm/mach-s5p6440/include/mach/uncompress.h ++ A arch/arm/mach-s5p6440/mach-smdk6440.c ++ A arch/arm/mach-s5p6440/setup-sdhci.c ++ A arch/arm/plat-s5p64xx/Kconfig ++ A arch/arm/plat-s5p64xx/Makefile ++ A arch/arm/plat-s5p64xx/adc.c ++ A arch/arm/plat-s5p64xx/clock.c ++ A arch/arm/plat-s5p64xx/cpu.c ++ A arch/arm/plat-s5p64xx/dev-uart.c ++ A arch/arm/plat-s5p64xx/devs.c ++ A arch/arm/plat-s5p64xx/gpiolib.c ++ A arch/arm/plat-s5p64xx/include/plat/dma.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-a.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-b.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-c.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-f.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-g.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-h.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-i.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-j.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-n.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-p.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-r.h ++ A arch/arm/plat-s5p64xx/include/plat/irqs.h ++ A arch/arm/plat-s5p64xx/include/plat/pll.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-clock.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-gpio.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-sys.h ++ A arch/arm/plat-s5p64xx/include/plat/s5p6440.h ++ A arch/arm/plat-s5p64xx/irq-eint.c ++ A arch/arm/plat-s5p64xx/irq.c ++ A arch/arm/plat-s5p64xx/s5p6440-clock.c ++ A arch/arm/plat-s5p64xx/s5p6440-init.c ++ A arch/arm/plat-s5p64xx/setup-i2c0.c ++ A arch/arm/plat-s5p64xx/setup-i2c1.c ++ Modified Files ++ M arch/arm/Kconfig ++ M arch/arm/Makefile ++ M arch/arm/mach-s5p6440/Makefile ++ M arch/arm/mm/Kconfig ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s3c/include/plat/cpu.h ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c/include/plat/regs-lcd.h ++ M arch/arm/tools/mach-types ++ M drivers/i2c/busses/Kconfig ++ M drivers/input/touchscreen/Kconfig ++ M drivers/mtd/nand/Kconfig ++ M drivers/serial/Kconfig ++ M drivers/video/Kconfig ++ M drivers/video/samsung/Makefile ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s3c64xx-r0d7: Ilho Lee ++ - ASYN/SYN mode select added. ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h ++ M arch/arm/plat-s3c64xx/s3c6400-clock.c ++ ++v2.6.28-rc8-s3c64xx-r0d8: Kyoungil Kim ++ - Support for FPGA6440 lcd ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/gpio.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ M drivers/video/samsung/s3cfb_lts222qv.c ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s3c64xx-r0d9: Jongpill Lee ++ - Support APM on SMDK6410 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/mach-s3c6400/include/mach/regs-irq.h ++ M arch/arm/mach-s3c6410/Makefile ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/regs-serial.h ++ M arch/arm/plat-s3c64xx/Makefile ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-k.h ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-l.h ++ M arch/arm/plat-s3c64xx/include/plat/regs-gpio.h ++ M arch/arm/plat-s3c64xx/irq.c ++ M drivers/video/samsung/s3cfb_fimd4x.c ++ Added Files: ++ A arch/arm/mach-s3c6410/irq.c ++ A arch/arm/mach-s3c6410/pm.c ++ A arch/arm/plat-s3c64xx/include/plat/gpio-bank-m.h ++ A arch/arm/plat-s3c64xx/include/plat/pm.h ++ A arch/arm/plat-s3c64xx/pm.c ++ A arch/arm/plat-s3c64xx/sleep.S ++ ++v2.6.28-rc8-s3c64xx-r0d10: Jongpill Lee ++ - Support RTC on SMDK6410 ++ ++ MOdified Files: ++ M arch/arm/mach-s3c2410/include/mach/map.h ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/regs-rtc.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/pm.h ++ M drivers/rtc/Kconfig ++ M drivers/rtc/rtc-s3c.c ++ ++v2.6.28-rc8-s3c64xx-r0d11: Kyoungil Kim ++ - Keypad Driver for SMDK6410 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/configs/smdk6410ramdisk_defconfig ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/gpio-config.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/clock.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-k.h ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-l.h ++ M drivers/input/keyboard/Kconfig ++ M drivers/input/keyboard/Makefile ++ M drivers/input/touchscreen/s3c-ts.c ++ Added Files: ++ A arch/arm/plat-s3c64xx/include/plat/regs-keypad.h ++ A drivers/input/keyboard/s3c-keypad.c ++ A drivers/input/keyboard/s3c-keypad.h ++ ++v2.6.28-rc8-s3c64xx-r0d12: Jongpill Lee ++ - Support HS-SPI on SMDK6410 ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/include/plat/regs-spi.h ++ A drivers/spi/hspi-s3c64xx.c ++ A drivers/spi/hspi-s3c64xx.h ++ A drivers/spi/spi-dev.c ++ A drivers/spi/spi-dev.h ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M drivers/rtc/rtc-s3c.c ++ M drivers/spi/Kconfig ++ M drivers/spi/Makefile ++ ++v2.6.28-rc8-s3c64xx-r0d13: Ilho Lee ++ - Support HS-MMC on SMDK6410 ++ ++v2.6.28-rc8-s3c64xx-r0d14: Jongpill Lee ++ - bug fiex on PM Driver ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/plat-s3c64xx/sleep.S ++ ++v2.6.28-rc8-s3c64xx-r0d15: Kyoungil Kim ++ - Support USB host on SMDK6410 ++ ++ Modifiled Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/configs/smdk6410onenand_defconfig ++ M arch/arm/configs/smdk6410ramdisk_defconfig ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/partition.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/usb/Kconfig ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/host/ohci-hcd.c ++ M drivers/usb/host/ohci-s3c2410.c ++ Added Files: ++ A arch/arm/mach-s3c6400/include/mach/usb-control.h ++ ++v2.6.28-rc8-s3c64xx-r0d16: Jongpill Lee ++ - Support DVS on CPUFREQ Driver ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/ltc3714.c ++ Modified Files: ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c64xx/Makefile ++ M arch/arm/plat-s3c64xx/s3c64xx-cpufreq.c ++ ++v2.6.28-rc8-s3c64xx-r0d17: Byungjae Lee ++ - Support Ethernet gadget and RNDIS for SMDK6410 ++ ++ Modifiled Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/f_rndis.c ++ M drivers/usb/gadget/s3c_udc.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/u_ether.c ++ Added Files: ++ A drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ A drivers/usb/gadget/s3c_udc_otg_xfer_slave.c ++ ++v2.6.28-rc8-s3c64xx-r0d18: Jongpill Lee ++ - Remove warning message ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/mach-s3c6410/pm.c ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c64xx/clock.c ++ M arch/arm/plat-s3c64xx/include/plat/pm.h ++ M arch/arm/plat-s3c64xx/irq.c ++ M arch/arm/plat-s3c64xx/ltc3714.c ++ M arch/arm/plat-s3c64xx/pm.c ++ M arch/arm/plat-s3c64xx/s3c64xx-cpufreq.c ++ M drivers/rtc/rtc-s3c.c ++ M drivers/spi/hspi-s3c64xx.c ++ ++v2.6.28-rc8-s3c64xx-r0d19: Kyoungil Kim ++ - Support Watchdog on SMDK6410 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/configs/smdk6410onenand_defconfig ++ M arch/arm/configs/smdk6410ramdisk_defconfig ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/watchdog/Kconfig ++ ++v2.6.28-rc8-s3c64xx-r0d20: Ryu Euiyoul ++ - Support S5M8751 on SMDK6410 ++ ++ Modified Files: ++ M sound/soc/codecs/Kconfig ++ M sound/soc/codecs/Makefile ++ M sound/soc/s3c64xx/Kconfig ++ M sound/soc/s3c64xx/Makefile ++ ++ Added Files: ++ A sound/soc/codecs/s5m8751.c ++ A sound/soc/codecs/s5m8751.h ++ A sound/soc/s3c64xx/smdk6410_s5m8751.c ++ A arch/arm/configs/smdk6410rf_defconfig ++ ++v2.6.28-rc8-s3c64xx-r0d21: SungJun Bae ++ - Support wm8580 on VEGA-L FPGA (Draft) ++ ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ M arch/arm/mach-s5p6440/dma.c ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/dma-pl080.c ++ M sound/soc/s3c64xx/Kconfig ++ M sound/soc/s3c64xx/Makefile ++ M sound/soc/s3c64xx/s3c-i2s.h ++ M sound/soc/s3c64xx/s3c-pcm.c ++ M sound/soc/s3c64xx/s3c6410-i2s-v40.c ++ ++ Added Files: ++ A sound/soc/s3c64xx/s5p6440-i2s-v40.c ++ A sound/soc/s3c64xx/smdk6440_wm8580.c ++ ++v2.6.28.6-s3c64xx: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r0d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r0d1: SungJun Bae ++ - Support Post Processor on SMDK6410 ++ ++ Modified Files: ++ M ChangeLog_s3c64xx ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c/include/plat/regs-lcd.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/media/video/Kconfig ++ M drivers/media/video/Makefile ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-pp.h ++ A arch/arm/plat-s3c/include/plat/reserved_mem.h ++ A drivers/media/video/samsung/post/Kconfig ++ A drivers/media/video/samsung/post/Makefile ++ A drivers/media/video/samsung/post/s3c_pp.h ++ A drivers/media/video/samsung/post/s3c_pp_6400.c ++ A drivers/media/video/samsung/post/s3c_pp_common.c ++ A drivers/media/video/samsung/post/s3c_pp_common.h ++ ++v2.6.28.6-s3c64xx-r0d2: SungJun Bae ++ - Support TV encoder,scaler on SMDK6410 ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/media/video/Kconfig ++ M drivers/media/video/Makefile ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/post/s3c_pp_6400.c ++ M drivers/media/video/v4l2-dev.c ++ M include/media/v4l2-dev.h ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-tvenc.h ++ A arch/arm/plat-s3c/include/plat/regs-tvscaler.h ++ A drivers/media/video/samsung/tv/Kconfig ++ A drivers/media/video/samsung/tv/Makefile ++ A drivers/media/video/samsung/tv/s3c-tvenc.c ++ A drivers/media/video/samsung/tv/s3c-tvenc.h ++ A drivers/media/video/samsung/tv/s3c-tvscaler.c ++ A drivers/media/video/samsung/tv/s3c-tvscaler.h ++v2.6.28.6-s3c64xx-r0d3: Jaeryul Oh ++ - Support JPEG, roator on SMDK6410 ++ ++ Modified Files : ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++ Added Files: ++ A drivers/media/video/samsung/jpeg/Kconfig ++ A drivers/media/video/samsung/jpeg/Makefile ++ A drivers/media/video/samsung/jpeg/jpg_conf.h ++ A drivers/media/video/samsung/jpeg/jpg_mem.c ++ A drivers/media/video/samsung/jpeg/jpg_mem.h ++ A drivers/media/video/samsung/jpeg/jpg_misc.c ++ A drivers/media/video/samsung/jpeg/jpg_misc.h ++ A drivers/media/video/samsung/jpeg/jpg_opr.c ++ A drivers/media/video/samsung/jpeg/jpg_opr.h ++ A drivers/media/video/samsung/jpeg/log_msg.c ++ A drivers/media/video/samsung/jpeg/log_msg.h ++ A drivers/media/video/samsung/jpeg/s3c-jpeg.c ++ A drivers/media/video/samsung/jpeg/s3c-jpeg.h ++ A drivers/media/video/samsung/rotator/Kconfig ++ A drivers/media/video/samsung/rotator/Makefile ++ A drivers/media/video/samsung/rotator/regs-rotator.h ++ A drivers/media/video/samsung/rotator/s3c_rotator.c ++ A drivers/media/video/samsung/rotator/s3c_rotator_common.h ++ ++v2.6.28.6-s3c64xx-r0d4: Jinsung Yang ++ - FIMC support for SMDK6410 ++ - Including reserved memory feature with bootmem ++ - All functions have been finished on the planning ++ ++v2.6.28.6-s3c64xx-r0d5: SungJun Bae ++ - bootmem applied to post and tv. ++ M drivers/media/video/samsung/post/s3c_pp_6400.c ++ M drivers/media/video/samsung/tv/s3c-tvscaler.h ++ ++v2.6.28.6-s3c64xx-r0d6: PyoungJae Jung, Jiun Yu ++ - MFC support for SMDK6410 ++ - It support bootmem for large buffer memory ++ - Changed coding style to linux kernel coding style ++ - Bug fixed in Hybrid DiVX encoding problem ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/media.h ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/include/plat/regs-mfc.h ++ A drivers/media/video/samsung/mfc/Kconfig ++ A drivers/media/video/samsung/mfc/Makefile ++ A drivers/media/video/samsung/mfc/prism_s.h ++ A drivers/media/video/samsung/mfc/prism_s_v137.c ++ A drivers/media/video/samsung/mfc/s3c_mfc.c ++ A drivers/media/video/samsung/mfc/s3c_mfc.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_base.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_bitproc_buf.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_bitproc_buf.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_config.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_databuf.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_databuf.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_hw_init.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_hw_init.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_inst_pool.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_inst_pool.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_instance.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_instance.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_intr_noti.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_params.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_set_config.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_sfr.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_sfr.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_types.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_yuv_buf_manager.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_yuv_buf_manager.h ++ ++v2.6.28.6-s3c64xx-r0d7: Kyoungil Kim ++ - Just Prevent tag for SMDK6410 ++ ++v2.6.28.6-s3c64xx-r0d8: Jaeryul Oh ++ - Fixed Bug in case of dynamic fps change of MPEG4 encoding ++ ++ Modified Files: ++ M drivers/media/video/samsung/mfc/s3c_mfc_instance.h ++ M drivers/media/video/samsung/mfc/s3c_mfc_instance.c ++ ++v2.6.28.6-s3c64xx-r0d9: Jonghun Han ++ - S3C6410 FIMG-2D driver support ++ ++ Added Files: ++ drivers/media/video/samsung/g2d/Kconfig ++ drivers/media/video/samsung/g2d/Makefile ++ drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ drivers/media/video/samsung/g2d/s3c_fimg2d2x.h ++ arch/arm/plat-s3c/include/plat/regs-g2d.h ++ ++ Modified Files: ++ arch/arm/configs/smdk6410mtd_defconfig ++ arch/arm/configs/smdk6410nfs_defconfig ++ arch/arm/configs/smdk6410onenand_defconfig ++ arch/arm/configs/smdk6410ramdisk_defconfig ++ arch/arm/mach-s3c6400/include/mach/map.h ++ arch/arm/mach-s3c6410/mach-smdk6410.c ++ arch/arm/plat-s3c/include/plat/devs.h ++ arch/arm/plat-s3c64xx/devs.c ++ drivers/media/video/samsung/Kconfig ++ drivers/media/video/samsung/Makefile ++ drivers/video/samsung/s3cfb.c ++ drivers/video/samsung/s3cfb_fimd4x.c ++ ++v2.6.28.6-s3c64xx-r1: Jonghun Han ++ - Official Release (09.03.06) ++ ++v2.6.28.6-s3c64xx-r1d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r1d1 : Byungjae Lee ++ - implemented s3c6410 OTG host role for Mass storage only ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/usb/Makefile ++ M drivers/usb/host/Kconfig ++ M drivers/usb/host/Makefile ++ ++ Added Files: ++ A drivers/usb/host/s3c-otg/* ++ ++v2.6.28.6-s3c64xx-r1d2 : Byungjae Lee ++ - implemented s3c6410 OTG host role for HID(Keyboard, Mouse) ++ and Card Reader ++ ++ Modified Files: ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-driver.c ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-hcd.c ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-kal.h ++ M drivers/usb/host/s3c-otg/s3c-otg-scheduler-ischeduler.c ++ M drivers/usb/host/s3c-otg/s3c-otg-scheduler-scheduler.h ++ M drivers/usb/host/s3c-otg/s3c-otg-transfer-common.c ++ M drivers/usb/host/s3c-otg/s3c-otg-transferchecker-common.c ++ ++v2.6.28.6-s3c64xx-r1d3 : Jongpill Lee ++ - defect is fixed on cpufreq driver ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/clock.c ++ ++v2.6.28.6-s3c64xx-r1d4 : Jongpill Lee ++ - defect is fixed on pm ++ ++ MOdified Fils: ++ M arch/arm/plat-s3c64xx/pm.c ++ ++v2.6.28.6-s3c64xx-r1d5: Kyoungil Kim ++ - Just Second Prevent tag for SMDK6410 ++ ++v2.6.28.6-s3c64xx-r1d6 : Jonghun Han ++ - update S3C6410 FIMG-2D driver ++ ++ Modified Fils: ++ M arch/arm/plat-s3c/include/plat/regs-g2d.h ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++v2.6.28.6-s3c64xx-r2: Kyoungil Kim ++ - Official Release (09.03.09) ++ ++v2.6.28.6-s3c64xx-r2d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r2d1: Jaeryul Oh ++ - Fixed Bug in case of rotator function of MFC ++ ++ Modified Files: ++ M drivers/media/video/samsung/mfc/s3c_mfc_instance.c ++ ++v2.6.28.6-s3c64xx-r2d2: Jonghun Han ++ - S3C6410 FIMG-3D driver support ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/char/s3c_mem.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++ Added Files: ++ A drivers/media/video/samsung/g3d/Kconfig ++ A drivers/media/video/samsung/g3d/Makefile ++ A drivers/media/video/samsung/g3d/s3c_fimg3d.c ++ A drivers/media/video/samsung/g3d/s3c_fimg3d.h ++ ++v2.6.28.6-s3c64xx-r2d3: Jonghun Han ++ - S5PC100 FIMG-2D driver support ++ ++ Modified Files: ++ M drivers/media/video/samsung/g2d/Kconfig ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++v2.6.28.6-s3c64xx-r3: Kyoungil Kim ++ - Official Release (09.03.13) ++ ++v2.6.28.6-s3c64xx-r3d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r3d1: Byungae Lee ++ - Support SMDK6410 USB Serial Gadget (with CDC ACM) ++ ++ Modified Files: ++ M arch/arm/plat-s3c/include/plat/regs-otg.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_slave.c ++ ++v2.6.28.6-s3c64xx-r3d2: Byungae Lee ++ - Removed warning on the debug message for the USB Gadget ++ ++ Modified Files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ ++v2.6.28.6-s3c64xx-r3d3: SungJun Bae ++ - Support CMM driver. ++ ++ Added Files: ++ A drivers/media/video/samsung/cmm/CMMMisc.c ++ A drivers/media/video/samsung/cmm/CMMMisc.h ++ A drivers/media/video/samsung/cmm/Kconfig ++ A drivers/media/video/samsung/cmm/LogMsg.c ++ A drivers/media/video/samsung/cmm/LogMsg.h ++ A drivers/media/video/samsung/cmm/Makefile ++ A drivers/media/video/samsung/cmm/s3c-cmm.c ++ A drivers/media/video/samsung/cmm/s3c-cmm.h ++ ++ Modified Files: ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++ ++v2.6.28.6-s3c64xx-r4: Jonghun Han ++ - Official Release (09.03.24) ++ ++v2.6.28.6-s3c64xx-r4d0: Jonghun Han ++ ++v2.6.28.6-s3c64xx-r4d1: Kyoungil Kim ++ - The last tag for s3c64xx branch(09.03.24) ++ ++rel-0-0-0 : Kwanghyun La (Nov.10.2008) ++ It's not fixed version , just only initial copy version for ++ estimation. ++ ++previous samsung-ap-2.6 repository ChangeLog_s5pc1xx for s5pc1xx branch ++----------------------------------------------------------------------- ++dev-0-0-1 : Ilho Lee ++dev-0-0-2 : Ilho Lee ++ Touchscreen D/D added, but Ethernet D/D is being adding. ++ ++dev-0-0-3 : Jongpill Lee ++ Support ADC driver and merge adc-s3c64xx.c and adc-s3c24xx.c file ++ ++ Removed Files: ++ R A arch/arm/plat-s3c64xx/adc-s3c64xx.c ++ ++ Added Files: ++ A arch/arm/plat-s3c/adc.c ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/adc.h ++ M drivers/char/Kconfig ++ ++dev-0-0-4 : Jongpill Lee ++ Bug fixed on ADC driver ++ ++ Modified Files: ++ M arch/arm/plat-s3c/adc.c ++ ++dev-0-0-5 : Ilho Lee ++ SMC9115 ethernet D/D is working(small_root only) ++ ++dev-0-0-6: Jinsung Yang ++ - NAND driver support ++ ++ Added files: ++ A arch/arm/configs/smdk6410mtd_defconfig ++ A arch/arm/plat-s3c/include/plat/partition.h ++ A drivers/mtd/nand/s3c_nand.c ++ ++ Modified files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/nand.h ++ M arch/arm/plat-s3c/include/plat/regs-nand.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/mtd/nand/Kconfig ++ M drivers/mtd/nand/Makefile ++ ++dev-0-0-7: Sungjun Bae ++ - I2S WM8580, I2SWM8990 Complete. ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h include/sound/soc.h ++ M sound/soc/soc-core.c sound/soc/codecs/wm8580.c sound/soc/codecs/wm8990.c ++ ++dev-0-0-8: Sungjun Bae ++ - DMA File Structure was changed. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ M arch/arm/plat-s3c64xx/Makefile ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl080.c ++ Removed Files: ++ R arch/arm/plat-s3c64xx/dma-pl080.c ++ ++dev-0-0-9: Ilho Lee ++ - PL330 DMA D/D file added ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/Kconfig ++ ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl330.c ++ A arch/arm/plat-s3c/dma-pl330-microcode.c ++ ++ ++dev-0-0-10: eyryu ++ - Add SMDKC100 initial. ++ ++dev-0-0-11: Ilho Lee ++ - DMA definition files changed ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ ++dev-0-0-12: Jinsung Yang ++ - gpiolib support for s5pc1xx architecture ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h ++ M arch/arm/mach-s5pc100/include/mach/gpio.h ++ M arch/arm/plat-s3c/gpio-config.c ++ M arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/gpiolib.c ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-b.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-c.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-d.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-i.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j4.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp00.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp01.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp02.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp03.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp04.h ++ ++dev-0-0-13: eyryu ++ - Add SMDKC100 clock & serial ++ ++dev-0-0-14: Ilho Lee ++ - ADC D/D added ++ ++ Added Files: ++ A arch/arm/plat-s3c24xx/adc.c ++ A arch/arm/plat-s3c64xx/adc.c ++ ++dev-0-0-15: eyryu ++ - Support SMDKC100 UART driver ++ - Add SMDKC100 clock & serial ++ ++rel-1-0-0: Kyoungil Kim ++ - Official Release (08.11.27) ++ ++dev-1-0-0: Kyoungil Kim ++ ++dev-1-0-1: Ilho Lee ++ - CPU idle added ++ ++ Added Files: ++ A arch/arm/mach-s3c6400/idle.h ++ A arch/arm/mach-s5pc100/idle.h ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s5pc100/cpu.c ++ ++dev-1-0-2: Ilho Lee ++ - S3C24XX -> S3C changed in the S3C DMA D/D. ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ M arch/arm/plat-s3c/dma-pl080.c ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/include/plat/s3c-dma.h ++ ++dev-1-0-3: Ilho Lee ++ - PL330 DMA D/D is adding.. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/dma-pl330-mcode.h ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ ++dev-1-0-4: Byungjae Lee ++ - Support File Storage Gadget for SMDK6410 HS USB OTG ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/Makefile ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/gadget_chips.h ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-otg.h ++ A drivers/usb/gadget/s3c_udc.h ++ A drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-5: Ilho Lee ++ - S3C touchscreen D/D changed. ++ ++ Modified Files: ++ M drivers/input/touchscreen/s3c-ts.c ++ ++dev-1-0-6: Jinsung Yang ++ - Clock system support for S5PC100 ++ ++ Modified files: ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M arch/arm/plat-s5pc1xx/include/plat/pll.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ ++dev-1-0-7: Jinsung Yang ++ - LCD (LTE480WV) support for SMDKC100 ++ ++ Modified files: ++ drivers/video/samsung/s5pfb_fimd5x.c ++ ++dev-1-0-8: Byungjae Lee ++ - Masked HCLK for USB OTG at register clocks ++ ++ Modified files: ++ M arch/arm/plat-s3c64xx/clock.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-9: Ilho Lee ++ - Ext-interrupts handlers added. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-10: Ilho Lee ++ - SMC9115 ethernet(100Mbps) D/D ported. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-11: Ilho Lee ++ - dev-adc.c deleted. ++ ++ Deleted Files: ++ D arch/arm/plat-s3c/dev-adc.c ++ ++rel-1-0-1: Kyoungil Kim ++ - Git Release (08.12.09) ++ ++v2.6.28-rc7-s5pc1xx-r0d0: Kyoungil Kim ++ - s5pc1xx rc7 initial git tag ++ ++v2.6.28-rc7-s5pc1xx-r0d1: Ilho Lee ++ - PL330 DMA D/D changed. ++ ++ Modified files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/dma-pl330-mcode.h ++ ++v2.6.28-rc7-s5pc1xx-r0d2: Jongpill Lee ++ - System Timer support on SMDKC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28-rc7-s5pc1xx-r0d3: Jongpill Lee ++ - System Timer bug fixed ++ ++ Modified Files: ++ M ChangeLog_s5pc1xx ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/include/mach/tick.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/map-base.h ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s5pc1xx/include/plat/regs-sys-timer.h ++ ++v2.6.28-rc8-s5pc1xx: Kyoungil Kim ++ - s5pc1xx rc8 patch ++ ++v2.6.28-rc8-s5pc1xx-r0d0: Kyoungil Kim ++ ++v2.6.28-rc8-s5pc1xx-r0d1: Abhilash Kesavan ++ - S5PC100 NAND driver support ++ ++ Added Files: ++ A arch/arm/configs/smdkc100mtd_defconfig ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/partition.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/mtd/nand/Kconfig ++ M drivers/mtd/nand/s3c_nand.c ++ ++v2.6.28-rc8-s5pc1xx-r0d2: Jinsung Yang ++ - Fix for wrong comments ++ ++v2.6.28-rc8-s5pc1xx-r0d3: Jinsung Yang ++ - Merge from s3c64xx branch ++ ++v2.6.28-rc8-s5pc1xx-r0d4: Abhilash Kesavan ++ - Touch-up for Nand ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ ++ ++v2.6.28-rc8-s5pc1xx-r0d5: Abhilash Kesavan ++ - Support for HS-MMC and USB ++ ++ Added Files: ++ A arch/arm/mach-s5pc100/include/mach/usb-control.h ++ A arch/arm/mach-s5pc100/setup-sdhci.c ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/Kconfig ++ M arch/arm/mach-s5pc100/Makefile ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/sdhci.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-sys.h ++ M drivers/mmc/host/Kconfig ++ M drivers/mmc/host/sdhci-s3c.c ++ M drivers/usb/Kconfig ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/f_rndis.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/host/ohci-hcd.c ++ M drivers/usb/host/ohci-s3c2410.c ++ ++v2.6.28-rc8-s5pc1xx-r0d6: Ilho Lee ++ - Touchscreen D/D got enabled and PL330 S&G DMA operations supported. ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/dma-pl330.c ++ ++v2.6.28-rc8-s5pc1xx-r0d7: Abhilash Kesavan ++ - Support for HS-MMC for S5PC1XX (Completed) ++ ++ Added Files: ++ A drivers/mmc/host/s3c-hsmmc.c ++ A drivers/mmc/host/s3c-hsmmc.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-hsmmc.h ++ ++ Deleted Files: ++ D arch/arm/mach-s5pc100/setup-sdhci.c ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/Kconfig ++ M arch/arm/mach-s5pc100/Makefile ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/mmc/host/Kconfig ++ M drivers/mmc/host/Makefile ++ ++v2.6.28-rc8-s5pc1xx-r0d8: Jongpill Lee ++ - Bug fixed on clock ++ ++ Modified Files: ++ M arch/arm/plat-s3c/clock.c ++ ++v2.6.28-rc8-s5pc1xx-r0d9: Abhilash Kesavan ++ - Support for ADC and PWM for S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/adc.c ++ A arch/arm/plat-s5pc1xx/pwm-s5pc100.c ++ A arch/arm/plat-s5pc1xx/pwm-s5pc100.h ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/regs-timer.h ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M drivers/mmc/host/s3c-hsmmc.c ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28-rc8-s5pc1xx-r1: Kyoungil Kim ++ - Internal Release(09.01.12) ++ ++v2.6.28-rc8-s5pc1xx-v1: Kyoungil Kim ++ - Official Release(09.01.12) ++ ++v2.6.28-rc8-s5pc1xx-r1d0: Kyoungil Kim ++ ++v2.6.28-rc8-s5pc1xx-r1d1: JongPill Lee ++ - Support IDLE Function on S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/include/plat/regs-power.h ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/include/mach/system.h ++ ++v2.6.28-rc8-s5pc1xx-r1d2: Abhilash Kesavan ++ - Support OneNand on S5PC100 (I) ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-onenand.h ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c/include/plat/partition.h ++ M drivers/mtd/onenand/Makefile ++ M drivers/mtd/onenand/onenand_bbt.c ++ M drivers/mtd/onenand/s3c_onenand.c ++ M drivers/mtd/onenand/s3c_onenand.h ++ ++v2.6.28-rc8-s5pc1xx-r1d3: Kyoungil Kim ++ - Support Keypad on S5PC100 ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100_defconfig ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/input/keyboard/Kconfig ++ M drivers/input/keyboard/s3c-keypad.h ++ ++v2.6.28-rc8-s5pc1xx-r1d4: Abhilash Kesavan ++ - Support HS-SPI on S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-spi.h ++ A drivers/spi/hspi-s3c.c ++ A drivers/spi/hspi-s3c.h ++ A drivers/spi/spi-dev.c ++ A drivers/spi/spi-dev.h ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/spi/Kconfig ++ M drivers/spi/Makefile ++ ++v2.6.28-rc8-s5pc1xx-r1d5: Jongpill Lee ++ - Support APM on S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/include/plat/pm.h ++ A arch/arm/plat-s5pc1xx/pm.c ++ A arch/arm/mach-s5pc100/pm.c ++ A arch/arm/plat-s5pc1xx/sleep.S ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/Makefile ++ M arch/arm/mach-s5pc100/include/mach/regs-irq.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s5pc1xx/include/plat/regs-power.h ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M drivers/serial/s5pc100.c ++ M drivers/serial/samsung.c ++ M drivers/serial/samsung.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28-rc8-s5pc1xx-r1d6: Jongpill Lee ++ - Support RTC Wakeup from Sleep mode ++ ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/pm.c ++ ++v2.6.28-rc8-s5pc1xx-r1d7: PyoungJae Jung/Jiun Yu ++ - Support MFC driver ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ ++v2.6.28-rc8-s5pc1xx-r2: Kyoungil Kim ++ - Official Release(09.01.23) ++ ++v2.6.28-rc8-s5pc1xx-r2d0: Kyoungil Kim ++ ++v2.6.28-rc8-s5pc1xx-r2d1: Byungjae Lee ++ - Support CDC Ethernet and RNDIS ++ - for SMDKc100 UBS OTG Deive role on DMA mode ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/regs-otg.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/s3c_udc.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/u_ether.c ++ ++ Added Files: ++ A drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ A drivers/usb/gadget/s3c_udc_otg_xfer_slave.c ++ ++ ++v2.6.28-rc8-s5pc1xx-r2d2: Jinsung Yang ++ - S5PC100 FIMC Driver ++ - Compilable version ++ ++ Modified files: ++ M drivers/media/video/Kconfig ++ M drivers/media/video/Makefile ++ M include/linux/i2c-id.h ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/include/plat/fimc.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-fimc.h ++ A drivers/media/video/samsung/Kconfig ++ A drivers/media/video/samsung/Makefile ++ A drivers/media/video/samsung/s3c_fimc.h ++ A drivers/media/video/samsung/s3c_fimc4x_regs.c ++ A drivers/media/video/samsung/s3c_fimc_cfg.c ++ A drivers/media/video/samsung/s3c_fimc_core.c ++ A drivers/media/video/samsung/s3c_fimc_v4l2.c ++ A drivers/media/video/samsung/s5k4ba.c ++ A drivers/media/video/samsung/s5k4ba.h ++ ++v2.6.28-rc8-s5pc1xx-r2d3: Jinsung Yang ++ - S5PC100 FIMC device setup support ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/dev-fimc0.c ++ A arch/arm/plat-s5pc1xx/dev-fimc1.c ++ A arch/arm/plat-s5pc1xx/dev-fimc2.c ++ A arch/arm/plat-s5pc1xx/setup-fimc0.c ++ A arch/arm/plat-s5pc1xx/setup-fimc1.c ++ A arch/arm/plat-s5pc1xx/setup-fimc2.c ++ ++v2.6.28-rc8-s5pc1xx-r2d4: Kyoungil Kim ++ - modified otg_phy_init proto type ++ ++ Modified files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28-rc8-s5pc1xx-r2d5: Hatim Ali ++ - S5PC100 Watchdog Timer support ++ ++ Modified files: ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/watchdog/Kconfig ++ ++v2.6.28-rc8-s5pc1xx-r2d6: Abhilash Kesavan ++ - S5PC100 AC97 WM9713 support ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/dma.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M sound/soc/codecs/wm9713.c ++ M sound/soc/s5pc1xx/Kconfig ++ M sound/soc/s5pc1xx/Makefile ++ ++ Added Files: ++ A sound/soc/s5pc1xx/s5pc1xx-ac97.c ++ A sound/soc/s5pc1xx/s5pc1xx-ac97.h ++ A sound/soc/s5pc1xx/smdkc100_wm9713.c ++ ++v2.6.28-rc8-s5pc1xx-r2d7: Jinsung Yang ++ - S5PC100 FIMC driver ++ - Camera input and memory output support ++ - Both camera channels (A and B) support ++ - Preview and capture related functionalities support ++ - S5K3BA and S5K4BA module support ++ ++v2.6.28-rc8-s5pc1xx-r2d8: Hatim Ali ++ - S5PC100 Notification LED support ++ ++ Modified files: ++ M arch/arm/Kconfig ++ M arch/arm/mach-s5pc100/Makefile ++ ++ Added Files: ++ A arch/arm/mach-s5pc100/leds-s5pc100.c ++ A arch/arm/mach-s5pc100/leds.c ++ A arch/arm/mach-s5pc100/leds.h ++ ++v2.6.28-rc8-s5pc1xx-r2d9: Abhilash Kesavan ++ - Enabled LCD/OSD Support for S5PC100 ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s5pc1xx-r2d10: Jinsung Yang ++ - S5PC100 FIMC driver ++ - Alpha Release ++ - Camera input support ++ - Memory input support ++ - Memory output support ++ - LCD FIFO output support ++ - Both camera channels (A and B) support ++ - Preview and capture related functionalities support ++ - S5K3BA and S5K4BA module support ++ ++v2.6.28.6-s5pc1xx: Kyoungil Kim ++ ++v2.6.28.6-s5pc1xx-r0d0: Kyoungil Kim ++ ++v2.6.28.6-s5pc1xx-r0d1: Abhilash Kesavan ++ - Pre-Beta Version ++ ++v2.6.28.6-s5pc1xx-r0d2: Jinsung Yang ++ - FIMC support for SMDKC100 ++ - Including reserved memory feature with bootmem ++ - All functions have been finished on the planning except for 'Input Rotator' with LCD FIFO Output ++ ++ ++v2.6.28.6-s5pc1xx-r0d3: Abhilash Kesavan ++ - IrDA support for S5PC100 ++ ++ Modified files: ++ M drivers/net/irda/s3c-sir.c ++ M include/net/irda/irda_device.h ++ ++v2.6.28.6-s5pc1xx-r0d4: Jae-Cheol Lee ++ - Support CPUFREQ for SMDKC100 ++ - DFS is only enabled, not DVS. ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M arch/arm/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s3c/clock.c ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/s5pc1xx-cpufreq.c ++ A arch/arm/plat-s5pc1xx/changediv.S ++ A arch/arm/plat-s5pc1xx/ltc3714.c ++ ++v2.6.28.6-s5pc1xx-r0d5: Kukjin Kim ++ - System Timer Modified for EVT1 ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/include/plat/regs-sys-timer.h ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-s5pc1xx-r0d6: Jonghun Han ++ - S5PC100 FIMG-2D driver support ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/regs-g2d.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/media/video/samsung/g2d/Kconfig ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++v2.6.28.6-s5pc1xx-r0d7: Jae-Cheol Lee ++ - Support SMDKC100 EVT1 POP type (Onenand+mDDR+OneDRAM) ++ Modified files: ++ M arch/arm/configs/smdkc100onenand_defconfig ++ M arch/arm/plat-s5pc1xx/cpu.c ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ ++v2.6.28.6-s5pc1xx-r0d8: PyoungJae Jung/JiUn Yu ++ - Support MFC (FIMV) for s5pc100 ++ - MFC driver is Alpha version ++ - remove CMM support and support bootmem memory secure way ++ - change directory name to separate to S3C6410 MFC driver ++ ++ Added files: ++ A drivers/media/video/samsung/mfc40/command_control_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_errorno.h ++ A drivers/media/video/samsung/mfc40/h263_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_fw.h ++ A drivers/media/video/samsung/mfc40/h264_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c-mfc.h ++ A drivers/media/video/samsung/mfc40/h264_enc_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_interface.h ++ A drivers/media/video/samsung/mfc40/Kconfig ++ A drivers/media/video/samsung/mfc40/s3c_mfc_intr.c ++ A drivers/media/video/samsung/mfc40/Makefile ++ A drivers/media/video/samsung/mfc40/s3c_mfc_intr.h ++ A drivers/media/video/samsung/mfc40/mp2_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.c ++ A drivers/media/video/samsung/mfc40/mp4_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.h ++ A drivers/media/video/samsung/mfc40/mp4_dec_order_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_memory.c ++ A drivers/media/video/samsung/mfc40/mp4_enc_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_memory.h ++ A drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_opr.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.h ++ A drivers/media/video/samsung/mfc40/s3c_mfc_opr.h ++ A drivers/media/video/samsung/mfc40/s3c-mfc.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_types.h ++ A drivers/media/video/samsung/mfc40/s3c_mfc_common.c ++ A drivers/media/video/samsung/mfc40/vc1_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_common.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-mfc.h ++ ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ ++v2.6.28.6-s5pc1xx-r0d9: Jonghun Han ++ - S5PC100 FIMG-3D driver support ++ Modified files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ M drivers/char/s3c_mem.c ++ M drivers/char/s3c_mem.h ++ M drivers/media/video/samsung/g3d/Kconfig ++ M drivers/media/video/samsung/g3d/s3c_fimg3d.h ++ ++v2.6.28.6-s5pc1xx-r0d10: Seungchull Suh ++ - SMC9115 works correctly. Before, full-duplex mode is not set. ++ M drivers/net/smc911x.c ++ ++ ++v2.6.28.6-s5pc1xx-r1: Kyoungil Kim ++ - Official Release(09.03.20) ++ ++v2.6.28.6-s5pc1xx-r1d0: Kyoungil Kim ++ ++v2.6.28.6-s5pc1xx-r1d1: Jaeryul Oh ++ - Support JPEG for s5pc100 ++ ++ Added files: ++ A drivers/media/video/samsung/jpeg_v2/jpg_mem.c ++ A drivers/media/video/samsung/jpeg_v2/jpg_misc.c ++ A drivers/media/video/samsung/jpeg_v2/s3c-jpeg.c ++ A drivers/media/video/samsung/jpeg_v2/jpg_opr.c ++ A drivers/media/video/samsung/jpeg_v2/log_msg.c ++ ++ A drivers/media/video/samsung/jpeg_v2/log_msg.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_conf.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_mem.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_misc.h ++ A drivers/media/video/samsung/jpeg_v2/regs-jpeg.h ++ A drivers/media/video/samsung/jpeg_v2/s3c-jpeg.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_opr.h ++ A drivers/media/video/samsung/jpeg_v2/Makefile ++ A drivers/media/video/samsung/jpeg_v2/Kconfig ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++v2.6.28.6-s5pc1xx-r1d2: Kyoungil Kim ++ - The last tag for s5pc1xx branch(09.03.24) ++ ++current linux-2.6-samsung repository ChangeLog ++----------------------------------------------------------------------- ++v2.6.28.6-samsung: Kyoungil Kim ++ - Merge s3c64xx branch and s5pc1xx branch to master branch(09.03.24) ++ ++v2.6.28.6-samsung-r0d0: Kyoungil Kim ++ ++v2.6.28.6-samsung-r0d1: Kukjin Kim ++ - Remove swp file ++ ++ Removed Files: ++ R arch/arm/plat-s3c/include/plat/.cpu-freq.h.swp ++ ++v2.6.28.6-samsung-r0d2: Kyoungil Kim ++ - Unified the ChangeLog files ++ ++ Modified Files: ++ M ChangeLog ++ ++ Deleted Files: ++ D ChangeLog_s3c64xx ++ D ChangeLog_s5pc1xx ++ ++v2.6.28.6-samsung-r0d3: Kukjin Kim ++ - System Timer initialize modified ++ ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-samsung-r0d4: Kukjin Kim ++ - System Timer init and setup function remodified ++ ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-samsung-r0d5: Kukjin Kim ++ - Support extcsd revision 1.3 ++ ++ Modified Files: ++ M drivers/mmc/core/mmc.c ++ ++v2.6.28.6-samsung-r0d6: Jaeryul Oh ++ - JPEG for c100 is updated ++ ++ Modified Files: ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/jpeg_v2/jpg_mem.h ++ M drivers/media/video/samsung/jpeg_v2/jpg_opr.c ++ M drivers/media/video/samsung/jpeg_v2/jpg_opr.h ++ M drivers/media/video/samsung/jpeg_v2/s3c-jpeg.c ++ M drivers/media/video/samsung/jpeg_v2/s3c-jpeg.h ++ ++v2.6.28.6-samsung-r0d7: Jae-Cheol Lee ++ - Adopting system timer h/w bug workaround ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-samsung-r0d8: Byungjae Lee ++ - Implemented OTG Host role for SMDKC100 ++ OTG Host role support only MassStorage and HID(Keyboard, Mouse) ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100onenand_defconfig ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/usb/host/Kconfig ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-debug.h ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-driver.c ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-driver.h ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-hcd.h ++ M drivers/usb/host/s3c-otg/s3c-otg-oci.c ++ M drivers/usb/host/s3c-otg/s3c-otg-oci.h ++ ++v2.6.28.6-samsung-r0d9: Jonghun Han ++ - Support YUV422 Interleave output for FIMC ++ ++ Modified Files: ++ M drivers/media/video/samsung/fimc/s3c_fimc.h ++ M drivers/media/video/samsung/fimc/s3c_fimc3x_regs.c ++ M drivers/media/video/samsung/fimc/s3c_fimc_cfg.c ++ ++v2.6.28.6-samsung-r0d10: Kyoungil Kim ++ - change the smc911 driver from full duplex to half duplex ++ ++ Modified Files: ++ M drivers/net/smc911x.c ++ ++v2.6.28.6-samsung-r0d11: Jae-Cheol Lee ++ - Support SMDK6440 EVT0 board ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s5p64xx/include/plat/pll.h ++ ++v2.6.28.6-samsung-r0d12: Kyoungil Kim ++ - Prevent for SMDKC100 MM IP ++ ++v2.6.28.6-samsung-r0d13: Jae-Cheol Lee ++ - Fixed PLL calculation bug in MASK value ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/include/plat/pll.h ++ M arch/arm/plat-s5pc1xx/include/plat/pll.h ++ ++v2.6.28.6-samsung-r0d14: Byungjae Lee ++ - Implemented USB OTG Device role for SMDK6440 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/regs-otg.h ++ M arch/arm/plat-s5p64xx/devs.c ++ M arch/arm/plat-s5p64xx/include/plat/regs-clock.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/s3c_udc.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28.6-samsung-r0d15: Jongpill Lee ++ - Modify code for SPi ++ ++ Modified Files ++ M drivers/spi/hspi-s3c64xx.c ++ ++v2.6.28.6-samsung-r1: Jaeryul Oh ++ - Official Release (09.04.06) ++ ++v2.6.28.6-samsung-r1d0: Jae-Cheol Lee ++ - Modified default configuration for SMDK6440 ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ ++v2.6.28.6-samsung-r1d1: Jaeryul Oh ++ - MFC, JPEG suspend/resume related code for SMDK6410 changed ++ Modified Files : ++ M drivers/media/video/samsung/jpeg/jpg_mem.c ++ M drivers/media/video/samsung/jpeg/s3c-jpeg.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ ++v2.6.28.6-samsung-r1d2: Jae-Cheol Lee ++ - Modified voltage regulator control code for SMDKC100 ++ Modified Files : ++ M arch/arm/plat-s5pc1xx/ltc3714.c ++ ++v2.6.28.6-samsung-r1d3: Jae-Cheol Lee ++ - Support CHIPID for S5P6440 ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/cpu.c ++ ++v2.6.28.6-samsung-r1d4: Jiun Yu, PyoungJae Jung ++ - fixed cache issue in MFC driver ++ ++v2.6.28.6-samsung-r1d5: Jae-Cheol Lee ++ - Change Console UART port 0 -> 1 for SMDK6440 ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ ++v2.6.28.6-samsung-r1d6: Byungjae Lee ++ - Fixed BUG USB OTG Device role for SMDK6440 and C100 ++ ++ Modified Files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28.6-samsung-r1d7: Jongpill LEe ++ - Support RTC for S5P6440 ++ ++ Modified files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/regs-rtc.h ++ M arch/arm/plat-s5p64xx/devs.c ++ M drivers/rtc/Kconfig ++ M drivers/rtc/rtc-s3c.c ++ ++v2.6.28.6-samsung-r2: Kyoungil Kim ++ - Official Release for SMDK6410(09.04.09) ++ ++v2.6.28.6-samsung-r2d0: Jongpill LEe ++ - Support Watchdog timer for S5P6440 ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s5p64xx/devs.c ++ M drivers/rtc/rtc-s3c.c ++ M drivers/watchdog/Kconfig ++ ++v2.6.28.6-samsung-r2d1: Jongpill Lee ++ - Support ADC Driver for S5P6440 ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c64xx/adc.c ++ M arch/arm/plat-s5p64xx/Kconfig ++ M arch/arm/plat-s5p64xx/devs.c ++ ++v2.6.28.6-samsung-r2d2: Jiun, Yu, PyoungJae Jung ++ - fixed cache issue in MFC1.0(6410) driver ++ ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc_set_config.c ++ ++v2.6.28.6-samsung-r2d3: Jiun, Yu, PyoungJae Jung ++ - fixed cache issue in MFC1.0(6410) driver ++ - changed cache update way to dma_cache_maint ++ ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc_set_config.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_databuf.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_instance.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_set_config.c ++ ++v2.6.28.6-samsung-r2d4: Jae-Cheol Lee ++ - Support DVFS on SMDK6440 board ++ ++ Modified Files : ++ M arch/arm/Kconfig ++ M arch/arm/plat-s5p64xx/Makefile ++ M arch/arm/plat-s5p64xx/clock.c ++ M arch/arm/plat-s5p64xx/ltc3714.c ++ M arch/arm/plat-s5p64xx/s5p64xx-cpufreq ++ ++v2.6.28.6-samsung-r2d5: Jongpill Lee ++ - Modify some code for S5PC100 ++ ++ Modified Files : ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-power.h ++ ++v2.6.28.6-samsung-r2d6: Jae-Cheol Lee ++ - Support backlight class by PWM on SMDK6440 board ++ ++ Added Files : ++ A arch/arm/plat-s5p64xx/pwm.c ++ ++ Modified Files : ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ M arch/arm/mach-s5p6440/cpu.c ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s3c/pwm-clock.c ++ M arch/arm/plat-s5p64xx/Kconfig ++ M arch/arm/plat-s5p64xx/Makefile ++ M arch/arm/plat-s5p64xx/clock.c ++ M arch/arm/plat-s5p64xx/pwm.c ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28.6-samsung-r2d7: Jaeryul Oh ++ - MFC suspend/resume related code for SMDK6410 updated ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_config.h ++ ++v2.6.28.6-samsung-r2d8: Jinsung Yang ++ - The 1st phase of MIPI-CSI support ++ ++ Addes files: ++ A arch/arm/plat-s5pc1xx/dev-csis.c ++ A arch/arm/plat-s5pc1xx/include/plat/csis.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-csis.h ++ A arch/arm/plat-s5pc1xx/setup-csis.c ++ A drivers/media/video/samsung/fimc/s3c_csis.c ++ A drivers/media/video/samsung/fimc/s3c_csis.h ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M drivers/media/video/samsung/fimc/Kconfig ++ M drivers/media/video/samsung/fimc/Makefile ++ M drivers/media/video/samsung/fimc/s3c_fimc.h ++ ++v2.6.28.6-samsung-r2d9: Jongpill Lee ++ - Temporary support APM for S5P6440 ++ ++ Added Files: ++ A arch/arm/mach-s5p6440/pm.c ++ A arch/arm/plat-s5p64xx/include/plat/pm.h ++ A arch/arm/plat-s5p64xx/pm.c ++ A arch/arm/plat-s5p64xx/sleep.S ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/Makefile ++ M arch/arm/mach-s5p6440/include/mach/gpio.h ++ M arch/arm/mach-s5p6440/include/mach/regs-irq.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s5p64xx/Makefile ++ M arch/arm/plat-s5p64xx/include/plat/regs-gpio.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28.6-samsung-r2d10: Jae-Cheol Lee ++ - Support backlight class driver by PWM on SMDK6410 ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/pwm.c ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/gpio.h ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/Kconfig ++ M arch/arm/plat-s3c64xx/Makefile ++ ++v2.6.28.6-samsung-r2d11: jongpill Lee ++ - bug fix on GPIO for S5P6440 ++ ++ MOdified Files: ++ M arch/arm/mach-s5p6440/include/mach/gpio.h ++ ++v2.6.28.6-samsung-r2d12: jongpill Lee ++ - APM Support for S5P6440 ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/sleep.S ++ ++v2.6.28.6-samsung-r2d13: Jae-Cheol Lee ++ - Support old style PWM driver for SMDK6410 ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/Kconfig ++ M arch/arm/plat-s3c64xx/Makefile ++ M arch/arm/plat-s3c64xx/pwm-s3c6410.c ++ M arch/arm/plat-s3c64xx/pwm-s3c6410.h ++ M drivers/video/samsung/s3cfb_fimd4x.c ++ ++v2.6.28.6-samsung-r2d14: Jongpill Lee ++ - Support reboot command ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/system.h ++ M arch/arm/mach-s5p6440/include/mach/system.h ++ M arch/arm/plat-s3c/include/plat/regs-watchdog.h ++ ++v2.6.28.6-samsung-r2d15: Jaeryul Oh ++ - MFC memory buffer size is changed ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc_config.h ++ ++v2.6.28.6-samsung-r2d16: Abhilash Kesavan ++ - Support backlight class driver by PWM on SMDKC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/pwm.c ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ M drivers/video/backlight/Kconfig ++ ++v2.6.28.6-samsung-r2d17: Kyoungil Kim ++ - Modified full speed configuration for gadget ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ ++v2.6.28.6-samsung-r3: Kyoungil Kim ++ - Official Release for SMDK6410(09.04.23) ++ ++v2.6.28.6-samsung-r3d0: Kyoungil Kim ++ ++v2.6.28.6-samsung-r3d1: Jaeryul Oh ++ - Clk name that MFC & JPEG (6410) uses is added ++ Modified Files : ++ M arch/arm/plat-s3c64xx/clock.c ++ M drivers/media/video/samsung/jpeg/s3c-jpeg.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ ++v2.6.28.6-samsung-r3d2: Jae-Cheol Lee ++ - Fixed APM bug on SMDKC100 ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/pm.c ++ M arch/arm/plat-s5pc1xx/sleep.S ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h ++ ++v2.6.28.6-samsung-r3d3: Thomas Abraham ++ - Added PM support for USB device on C100. ++ Modified Files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/file_storage.c ++ ++v2.6.28.6-samsung-r3d4: Jinsung Yang ++ - S5P6440 Post Processor Support ++ - Just compilable version ++ ++ Added files: ++ A arch/arm/plat-s5p64xx/bootmem.c ++ A arch/arm/plat-s5p64xx/dev-post.c ++ A arch/arm/plat-s5p64xx/include/plat/media.h ++ A arch/arm/plat-s5p64xx/include/plat/post.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-post.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-pp.h ++ A arch/arm/plat-s5p64xx/setup-post.c ++ A drivers/media/video/samsung/post/s3c_post.h ++ A drivers/media/video/samsung/post/s3c_post_cfg.c ++ A drivers/media/video/samsung/post/s3c_post_core.c ++ A drivers/media/video/samsung/post/s3c_post_regs.c ++ A drivers/media/video/samsung/post/s3c_post_v4l2.c ++ ++ Modified files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/plat-s5p64xx/Makefile ++ M arch/arm/plat-s5p64xx/clock.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/post/Kconfig ++ M drivers/media/video/samsung/post/Makefile ++ ++v2.6.28.6-samsung-r3d5: Thomas Abraham ++ - Fixed PM bug in USB gadget. ++ Modified Files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28.6-samsung-r3d6: Abhilash Kesavan ++ - Added PM defconfig (Base), Onenand Platform and Misc PM Fixes ++ Modified Files: ++ M drivers/mtd/onenand/generic.c ++ M drivers/mtd/onenand/s3c_onenand.c ++ M drivers/media/video/samsung/g3d/s3c_fimg3d.c ++ M sound/soc/codecs/wm9713.c ++ ++ Added File: ++ A arch/arm/configs/smdkc100pm_defconfig ++ ++v2.6.28.6-samsung-r3d7: Jongpill Lee ++ - ADC bug fixed on SMDK6440 ++ ++ Modified Files: ++ ++ M arch/arm/plat-s5p64xx/adc.c ++ ++v2.6.28.6-samsung-r3d8: Jae-Cheol Lee ++ - Support DFS on SMDK6440 ++ Modified Files: ++ M arch/arm/plat-s5p64xx/clock.c ++ ++v2.6.28.6-samsung-r3d9: SungJun Bae ++ - merged with mfc branch v2.6.28.6-samsung-mfc-r0d0 ++ ++v2.6.28.6-samsung-r3d10: Jongpill Lee ++ - Bug fixed on APM driver for S3C6410 ++ ++ MOdified Files: ++ M arch/arm/plat-s3c64xx/sleep.S ++ ++v2.6.28.6-samsung-r4: Kyoungil Kim ++ - Official Release for SMDK6410, 6440, C100(09.04.30) ++ ++v2.6.28.6-samsung-r4d0: Kyoungil Kim ++ ++v2.6.28.6-samsung-r4d1: Jassi ++ - Addded SPI driver support for S3C6410 and S5P6440 acc to latest ++ Linux-SPI architecture ++ ++v2.6.28.6-samsung-r5: Kyoungil Kim ++ - Official Release for SMDK6410, 6440, C100(09.04.30) +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/ChangeLog_mfc linux-2.6.28.6/ChangeLog_mfc +--- linux-2.6.28/ChangeLog_mfc 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/ChangeLog_mfc 2009-04-30 09:36:36.000000000 +0200 +@@ -0,0 +1,2069 @@ ++previous samsung-ap-2.6 repository ChangeLog_s3c64xx for s3c64xx branch ++----------------------------------------------------------------------- ++rel-0-0-0 : Kwanghyun La (Nov.10.2008) ++ It's not fixed version , just only initial copy version for ++ estimation. ++ ++dev-0-0-1 : Ilho Lee ++dev-0-0-2 : Ilho Lee ++ Touchscreen D/D added, but Ethernet D/D is being adding. ++ ++dev-0-0-3 : Jongpill Lee ++ Support ADC driver and merge adc-s3c64xx.c and adc-s3c24xx.c file ++ ++ Removed Files: ++ R A arch/arm/plat-s3c64xx/adc-s3c64xx.c ++ ++ Added Files: ++ A arch/arm/plat-s3c/adc.c ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/adc.h ++ M drivers/char/Kconfig ++ ++dev-0-0-4 : Jongpill Lee ++ Bug fixed on ADC driver ++ ++ Modified Files: ++ M arch/arm/plat-s3c/adc.c ++ ++dev-0-0-5 : Ilho Lee ++ SMC9115 ethernet D/D is working(small_root only) ++ ++dev-0-0-6: Jinsung Yang ++ - NAND driver support ++ ++ Added files: ++ A arch/arm/configs/smdk6410mtd_defconfig ++ A arch/arm/plat-s3c/include/plat/partition.h ++ A drivers/mtd/nand/s3c_nand.c ++ ++ Modified files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/nand.h ++ M arch/arm/plat-s3c/include/plat/regs-nand.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/mtd/nand/Kconfig ++ M drivers/mtd/nand/Makefile ++ ++dev-0-0-7: Sungjun Bae ++ - I2S WM8580, I2SWM8990 Complete. ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h include/sound/soc.h ++ M sound/soc/soc-core.c sound/soc/codecs/wm8580.c sound/soc/codecs/wm8990.c ++ ++dev-0-0-8: Sungjun Bae ++ - DMA File Structure was changed. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ M arch/arm/plat-s3c64xx/Makefile ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl080.c ++ Removed Files: ++ R arch/arm/plat-s3c64xx/dma-pl080.c ++ ++dev-0-0-9: Ilho Lee ++ - PL330 DMA D/D file added ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/Kconfig ++ ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl330.c ++ A arch/arm/plat-s3c/dma-pl330-microcode.c ++ ++ ++dev-0-0-10: eyryu ++ - Add SMDKC100 initial. ++ ++dev-0-0-11: Ilho Lee ++ - DMA definition files changed ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ ++dev-0-0-12: Jinsung Yang ++ - gpiolib support for s5pc1xx architecture ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h ++ M arch/arm/mach-s5pc100/include/mach/gpio.h ++ M arch/arm/plat-s3c/gpio-config.c ++ M arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/gpiolib.c ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-b.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-c.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-d.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-i.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j4.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp00.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp01.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp02.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp03.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp04.h ++ ++dev-0-0-13: eyryu ++ - Add SMDKC100 clock & serial ++ ++dev-0-0-14: Ilho Lee ++ - ADC D/D added ++ ++ Added Files: ++ A arch/arm/plat-s3c24xx/adc.c ++ A arch/arm/plat-s3c64xx/adc.c ++ ++dev-0-0-15: eyryu ++ - Support SMDKC100 UART driver ++ - Add SMDKC100 clock & serial ++ ++rel-1-0-0: Kyoungil Kim ++ - Official Release (08.11.27) ++ ++dev-1-0-0: Kyoungil Kim ++ ++dev-1-0-1: Ilho Lee ++ - CPU idle added ++ ++ Added Files: ++ A arch/arm/mach-s3c6400/idle.h ++ A arch/arm/mach-s5pc100/idle.h ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s5pc100/cpu.c ++ ++dev-1-0-2: Ilho Lee ++ - S3C24XX -> S3C changed in the S3C DMA D/D. ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ M arch/arm/plat-s3c/dma-pl080.c ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/include/plat/s3c-dma.h ++ ++dev-1-0-3: Ilho Lee ++ - PL330 DMA D/D is adding.. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/dma-pl330-mcode.h ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ ++dev-1-0-4: Byungjae Lee ++ - Support File Storage Gadget for SMDK6410 HS USB OTG ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/Makefile ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/gadget_chips.h ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-otg.h ++ A drivers/usb/gadget/s3c_udc.h ++ A drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-5: Ilho Lee ++ - S3C touchscreen D/D changed. ++ ++ Modified Files: ++ M drivers/input/touchscreen/s3c-ts.c ++ ++dev-1-0-6: Jinsung Yang ++ - Clock system support for S5PC100 ++ ++ Modified files: ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M arch/arm/plat-s5pc1xx/include/plat/pll.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ ++dev-1-0-7: Jinsung Yang ++ - LCD (LTE480WV) support for SMDKC100 ++ ++ Modified files: ++ drivers/video/samsung/s5pfb_fimd5x.c ++ ++dev-1-0-8: Byungjae Lee ++ - Masked HCLK for USB OTG at register clocks ++ ++ Modified files: ++ M arch/arm/plat-s3c64xx/clock.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-9: Ilho Lee ++ - Ext-interrupts handlers added. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-10: Ilho Lee ++ - SMC9115 ethernet(100Mbps) D/D ported. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-11: Ilho Lee ++ - dev-adc.c deleted. ++ ++ Deleted Files: ++ D arch/arm/plat-s3c/dev-adc.c ++ ++rel-1-0-1: Kyoungil Kim ++ - Git Release (08.12.09) ++ ++v2.6.28-rc7-s3c64xx-r0d0: Kyoungil Kim ++ - s3c64xx rc7 initial git tag ++ ++v2.6.28-rc8-s3c64xx: Kyoungil Kim ++ - s3c64xx rc8 patch ++ ++v2.6.28-rc8-s3c64xx-r0d0: Kyoungil Kim ++ ++v2.6.28-rc8-s3c64xx-r0d1: Jinsung Yang ++ - Fix for wrong comments ++ ++v2.6.28-rc8-s3c64xx-r0d2: Jongpill Lee ++ ++ - bug fixed about OS Timer ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/cpu.h ++ M arch/arm/plat-s3c/include/plat/regs-timer.h ++ M arch/arm/plat-s3c/time.c ++ M arch/arm/plat-s3c24xx/include/plat/cpu.h ++ ++v2.6.28-rc8-s3c64xx-r0d3: Jongpill Lee ++ - Remove adc driver on s3c24xx ++ Modified Files: ++ M arch/arm/plat-s3c24xx/Kconfig ++ M arch/arm/plat-s3c24xx/Makefile ++ Deleted Files: ++ D arch/arm/plat-s3c24xx/adc.c ++ ++v2.6.28-rc8-s3c64xx-r0d4: Jinsung Yang ++ - 24 bit logo display support ++ - s3c framebuffer driver naming rule changes ++ ++ Modified files: ++ M drivers/video/cfbimgblt.c ++ M drivers/video/samsung/s3cfb.c ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_fimd4x.c ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ M drivers/video/samsung/s3cfb_lte480wv.c ++ M drivers/video/samsung/s3cfb_lts222qv.c ++ M drivers/video/samsung/s3cfb_ltv350qv.c ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s3c64xx-r0d5: Jongpill Lee ++ -Support cpu freq on smdk6410 ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/s3c64xx-cpufreq.carch/arm/plat-s3c64xx/s3c64xx-cpufreq.c ++ Modified Files: ++ M arch/arm/Kconfig ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c64xx/Makefile ++ ++v2.6.28-rc8-s3c64xx-r0d6: Kyoungil Kim ++ - split plat-s5p64xx, mach-s5p6440 ++ - Support for s5p6440 serial ++ ++ Added Files ++ A arch/arm/configs/smdk6440ramdisk_defconfig ++ A arch/arm/mach-s5p6440/Kconfig ++ A arch/arm/mach-s5p6440/Makefile.boot ++ A arch/arm/mach-s5p6440/cpu.c ++ A arch/arm/mach-s5p6440/dma.c ++ A arch/arm/mach-s5p6440/include/mach/debug-macro.S ++ A arch/arm/mach-s5p6440/include/mach/dma.h ++ A arch/arm/mach-s5p6440/include/mach/entry-macro.S ++ A arch/arm/mach-s5p6440/include/mach/gpio-core.h ++ A arch/arm/mach-s5p6440/include/mach/gpio.h ++ A arch/arm/mach-s5p6440/include/mach/hardware.h ++ A arch/arm/mach-s5p6440/include/mach/idle.h ++ A arch/arm/mach-s5p6440/include/mach/irqs.h ++ A arch/arm/mach-s5p6440/include/mach/map.h ++ A arch/arm/mach-s5p6440/include/mach/memory.h ++ A arch/arm/mach-s5p6440/include/mach/regs-irq.h ++ A arch/arm/mach-s5p6440/include/mach/regs-mem.h ++ A arch/arm/mach-s5p6440/include/mach/system.h ++ A arch/arm/mach-s5p6440/include/mach/tick.h ++ A arch/arm/mach-s5p6440/include/mach/uncompress.h ++ A arch/arm/mach-s5p6440/mach-smdk6440.c ++ A arch/arm/mach-s5p6440/setup-sdhci.c ++ A arch/arm/plat-s5p64xx/Kconfig ++ A arch/arm/plat-s5p64xx/Makefile ++ A arch/arm/plat-s5p64xx/adc.c ++ A arch/arm/plat-s5p64xx/clock.c ++ A arch/arm/plat-s5p64xx/cpu.c ++ A arch/arm/plat-s5p64xx/dev-uart.c ++ A arch/arm/plat-s5p64xx/devs.c ++ A arch/arm/plat-s5p64xx/gpiolib.c ++ A arch/arm/plat-s5p64xx/include/plat/dma.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-a.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-b.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-c.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-f.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-g.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-h.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-i.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-j.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-n.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-p.h ++ A arch/arm/plat-s5p64xx/include/plat/gpio-bank-r.h ++ A arch/arm/plat-s5p64xx/include/plat/irqs.h ++ A arch/arm/plat-s5p64xx/include/plat/pll.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-clock.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-gpio.h ++ A arch/arm/plat-s5p64xx/include/plat/regs-sys.h ++ A arch/arm/plat-s5p64xx/include/plat/s5p6440.h ++ A arch/arm/plat-s5p64xx/irq-eint.c ++ A arch/arm/plat-s5p64xx/irq.c ++ A arch/arm/plat-s5p64xx/s5p6440-clock.c ++ A arch/arm/plat-s5p64xx/s5p6440-init.c ++ A arch/arm/plat-s5p64xx/setup-i2c0.c ++ A arch/arm/plat-s5p64xx/setup-i2c1.c ++ Modified Files ++ M arch/arm/Kconfig ++ M arch/arm/Makefile ++ M arch/arm/mach-s5p6440/Makefile ++ M arch/arm/mm/Kconfig ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s3c/include/plat/cpu.h ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c/include/plat/regs-lcd.h ++ M arch/arm/tools/mach-types ++ M drivers/i2c/busses/Kconfig ++ M drivers/input/touchscreen/Kconfig ++ M drivers/mtd/nand/Kconfig ++ M drivers/serial/Kconfig ++ M drivers/video/Kconfig ++ M drivers/video/samsung/Makefile ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s3c64xx-r0d7: Ilho Lee ++ - ASYN/SYN mode select added. ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h ++ M arch/arm/plat-s3c64xx/s3c6400-clock.c ++ ++v2.6.28-rc8-s3c64xx-r0d8: Kyoungil Kim ++ - Support for FPGA6440 lcd ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/gpio.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ M drivers/video/samsung/s3cfb_lts222qv.c ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s3c64xx-r0d9: Jongpill Lee ++ - Support APM on SMDK6410 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/mach-s3c6400/include/mach/regs-irq.h ++ M arch/arm/mach-s3c6410/Makefile ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/regs-serial.h ++ M arch/arm/plat-s3c64xx/Makefile ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-k.h ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-l.h ++ M arch/arm/plat-s3c64xx/include/plat/regs-gpio.h ++ M arch/arm/plat-s3c64xx/irq.c ++ M drivers/video/samsung/s3cfb_fimd4x.c ++ Added Files: ++ A arch/arm/mach-s3c6410/irq.c ++ A arch/arm/mach-s3c6410/pm.c ++ A arch/arm/plat-s3c64xx/include/plat/gpio-bank-m.h ++ A arch/arm/plat-s3c64xx/include/plat/pm.h ++ A arch/arm/plat-s3c64xx/pm.c ++ A arch/arm/plat-s3c64xx/sleep.S ++ ++v2.6.28-rc8-s3c64xx-r0d10: Jongpill Lee ++ - Support RTC on SMDK6410 ++ ++ MOdified Files: ++ M arch/arm/mach-s3c2410/include/mach/map.h ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/regs-rtc.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/pm.h ++ M drivers/rtc/Kconfig ++ M drivers/rtc/rtc-s3c.c ++ ++v2.6.28-rc8-s3c64xx-r0d11: Kyoungil Kim ++ - Keypad Driver for SMDK6410 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/configs/smdk6410ramdisk_defconfig ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/gpio-config.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/clock.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-k.h ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-l.h ++ M drivers/input/keyboard/Kconfig ++ M drivers/input/keyboard/Makefile ++ M drivers/input/touchscreen/s3c-ts.c ++ Added Files: ++ A arch/arm/plat-s3c64xx/include/plat/regs-keypad.h ++ A drivers/input/keyboard/s3c-keypad.c ++ A drivers/input/keyboard/s3c-keypad.h ++ ++v2.6.28-rc8-s3c64xx-r0d12: Jongpill Lee ++ - Support HS-SPI on SMDK6410 ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/include/plat/regs-spi.h ++ A drivers/spi/hspi-s3c64xx.c ++ A drivers/spi/hspi-s3c64xx.h ++ A drivers/spi/spi-dev.c ++ A drivers/spi/spi-dev.h ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M drivers/rtc/rtc-s3c.c ++ M drivers/spi/Kconfig ++ M drivers/spi/Makefile ++ ++v2.6.28-rc8-s3c64xx-r0d13: Ilho Lee ++ - Support HS-MMC on SMDK6410 ++ ++v2.6.28-rc8-s3c64xx-r0d14: Jongpill Lee ++ - bug fiex on PM Driver ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/plat-s3c64xx/sleep.S ++ ++v2.6.28-rc8-s3c64xx-r0d15: Kyoungil Kim ++ - Support USB host on SMDK6410 ++ ++ Modifiled Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/configs/smdk6410onenand_defconfig ++ M arch/arm/configs/smdk6410ramdisk_defconfig ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/partition.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/usb/Kconfig ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/host/ohci-hcd.c ++ M drivers/usb/host/ohci-s3c2410.c ++ Added Files: ++ A arch/arm/mach-s3c6400/include/mach/usb-control.h ++ ++v2.6.28-rc8-s3c64xx-r0d16: Jongpill Lee ++ - Support DVS on CPUFREQ Driver ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/ltc3714.c ++ Modified Files: ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c64xx/Makefile ++ M arch/arm/plat-s3c64xx/s3c64xx-cpufreq.c ++ ++v2.6.28-rc8-s3c64xx-r0d17: Byungjae Lee ++ - Support Ethernet gadget and RNDIS for SMDK6410 ++ ++ Modifiled Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/f_rndis.c ++ M drivers/usb/gadget/s3c_udc.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/u_ether.c ++ Added Files: ++ A drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ A drivers/usb/gadget/s3c_udc_otg_xfer_slave.c ++ ++v2.6.28-rc8-s3c64xx-r0d18: Jongpill Lee ++ - Remove warning message ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/mach-s3c6410/pm.c ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c64xx/clock.c ++ M arch/arm/plat-s3c64xx/include/plat/pm.h ++ M arch/arm/plat-s3c64xx/irq.c ++ M arch/arm/plat-s3c64xx/ltc3714.c ++ M arch/arm/plat-s3c64xx/pm.c ++ M arch/arm/plat-s3c64xx/s3c64xx-cpufreq.c ++ M drivers/rtc/rtc-s3c.c ++ M drivers/spi/hspi-s3c64xx.c ++ ++v2.6.28-rc8-s3c64xx-r0d19: Kyoungil Kim ++ - Support Watchdog on SMDK6410 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig ++ M arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/configs/smdk6410onenand_defconfig ++ M arch/arm/configs/smdk6410ramdisk_defconfig ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/watchdog/Kconfig ++ ++v2.6.28-rc8-s3c64xx-r0d20: Ryu Euiyoul ++ - Support S5M8751 on SMDK6410 ++ ++ Modified Files: ++ M sound/soc/codecs/Kconfig ++ M sound/soc/codecs/Makefile ++ M sound/soc/s3c64xx/Kconfig ++ M sound/soc/s3c64xx/Makefile ++ ++ Added Files: ++ A sound/soc/codecs/s5m8751.c ++ A sound/soc/codecs/s5m8751.h ++ A sound/soc/s3c64xx/smdk6410_s5m8751.c ++ A arch/arm/configs/smdk6410rf_defconfig ++ ++v2.6.28-rc8-s3c64xx-r0d21: SungJun Bae ++ - Support wm8580 on VEGA-L FPGA (Draft) ++ ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ M arch/arm/mach-s5p6440/dma.c ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/dma-pl080.c ++ M sound/soc/s3c64xx/Kconfig ++ M sound/soc/s3c64xx/Makefile ++ M sound/soc/s3c64xx/s3c-i2s.h ++ M sound/soc/s3c64xx/s3c-pcm.c ++ M sound/soc/s3c64xx/s3c6410-i2s-v40.c ++ ++ Added Files: ++ A sound/soc/s3c64xx/s5p6440-i2s-v40.c ++ A sound/soc/s3c64xx/smdk6440_wm8580.c ++ ++v2.6.28.6-s3c64xx: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r0d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r0d1: SungJun Bae ++ - Support Post Processor on SMDK6410 ++ ++ Modified Files: ++ M ChangeLog_s3c64xx ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c/include/plat/regs-lcd.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/media/video/Kconfig ++ M drivers/media/video/Makefile ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-pp.h ++ A arch/arm/plat-s3c/include/plat/reserved_mem.h ++ A drivers/media/video/samsung/post/Kconfig ++ A drivers/media/video/samsung/post/Makefile ++ A drivers/media/video/samsung/post/s3c_pp.h ++ A drivers/media/video/samsung/post/s3c_pp_6400.c ++ A drivers/media/video/samsung/post/s3c_pp_common.c ++ A drivers/media/video/samsung/post/s3c_pp_common.h ++ ++v2.6.28.6-s3c64xx-r0d2: SungJun Bae ++ - Support TV encoder,scaler on SMDK6410 ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/media/video/Kconfig ++ M drivers/media/video/Makefile ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/post/s3c_pp_6400.c ++ M drivers/media/video/v4l2-dev.c ++ M include/media/v4l2-dev.h ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-tvenc.h ++ A arch/arm/plat-s3c/include/plat/regs-tvscaler.h ++ A drivers/media/video/samsung/tv/Kconfig ++ A drivers/media/video/samsung/tv/Makefile ++ A drivers/media/video/samsung/tv/s3c-tvenc.c ++ A drivers/media/video/samsung/tv/s3c-tvenc.h ++ A drivers/media/video/samsung/tv/s3c-tvscaler.c ++ A drivers/media/video/samsung/tv/s3c-tvscaler.h ++v2.6.28.6-s3c64xx-r0d3: Jaeryul Oh ++ - Support JPEG, roator on SMDK6410 ++ ++ Modified Files : ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++ Added Files: ++ A drivers/media/video/samsung/jpeg/Kconfig ++ A drivers/media/video/samsung/jpeg/Makefile ++ A drivers/media/video/samsung/jpeg/jpg_conf.h ++ A drivers/media/video/samsung/jpeg/jpg_mem.c ++ A drivers/media/video/samsung/jpeg/jpg_mem.h ++ A drivers/media/video/samsung/jpeg/jpg_misc.c ++ A drivers/media/video/samsung/jpeg/jpg_misc.h ++ A drivers/media/video/samsung/jpeg/jpg_opr.c ++ A drivers/media/video/samsung/jpeg/jpg_opr.h ++ A drivers/media/video/samsung/jpeg/log_msg.c ++ A drivers/media/video/samsung/jpeg/log_msg.h ++ A drivers/media/video/samsung/jpeg/s3c-jpeg.c ++ A drivers/media/video/samsung/jpeg/s3c-jpeg.h ++ A drivers/media/video/samsung/rotator/Kconfig ++ A drivers/media/video/samsung/rotator/Makefile ++ A drivers/media/video/samsung/rotator/regs-rotator.h ++ A drivers/media/video/samsung/rotator/s3c_rotator.c ++ A drivers/media/video/samsung/rotator/s3c_rotator_common.h ++ ++v2.6.28.6-s3c64xx-r0d4: Jinsung Yang ++ - FIMC support for SMDK6410 ++ - Including reserved memory feature with bootmem ++ - All functions have been finished on the planning ++ ++v2.6.28.6-s3c64xx-r0d5: SungJun Bae ++ - bootmem applied to post and tv. ++ M drivers/media/video/samsung/post/s3c_pp_6400.c ++ M drivers/media/video/samsung/tv/s3c-tvscaler.h ++ ++v2.6.28.6-s3c64xx-r0d6: PyoungJae Jung, Jiun Yu ++ - MFC support for SMDK6410 ++ - It support bootmem for large buffer memory ++ - Changed coding style to linux kernel coding style ++ - Bug fixed in Hybrid DiVX encoding problem ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/media.h ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++ Added Files: ++ A arch/arm/plat-s3c64xx/include/plat/regs-mfc.h ++ A drivers/media/video/samsung/mfc/Kconfig ++ A drivers/media/video/samsung/mfc/Makefile ++ A drivers/media/video/samsung/mfc/prism_s.h ++ A drivers/media/video/samsung/mfc/prism_s_v137.c ++ A drivers/media/video/samsung/mfc/s3c_mfc.c ++ A drivers/media/video/samsung/mfc/s3c_mfc.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_base.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_bitproc_buf.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_bitproc_buf.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_config.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_databuf.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_databuf.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_hw_init.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_hw_init.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_inst_pool.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_inst_pool.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_instance.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_instance.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_intr_noti.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_params.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_set_config.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_sfr.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_sfr.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_types.h ++ A drivers/media/video/samsung/mfc/s3c_mfc_yuv_buf_manager.c ++ A drivers/media/video/samsung/mfc/s3c_mfc_yuv_buf_manager.h ++ ++v2.6.28.6-s3c64xx-r0d7: Kyoungil Kim ++ - Just Prevent tag for SMDK6410 ++ ++v2.6.28.6-s3c64xx-r0d8: Jaeryul Oh ++ - Fixed Bug in case of dynamic fps change of MPEG4 encoding ++ ++ Modified Files: ++ M drivers/media/video/samsung/mfc/s3c_mfc_instance.h ++ M drivers/media/video/samsung/mfc/s3c_mfc_instance.c ++ ++v2.6.28.6-s3c64xx-r0d9: Jonghun Han ++ - S3C6410 FIMG-2D driver support ++ ++ Added Files: ++ drivers/media/video/samsung/g2d/Kconfig ++ drivers/media/video/samsung/g2d/Makefile ++ drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ drivers/media/video/samsung/g2d/s3c_fimg2d2x.h ++ arch/arm/plat-s3c/include/plat/regs-g2d.h ++ ++ Modified Files: ++ arch/arm/configs/smdk6410mtd_defconfig ++ arch/arm/configs/smdk6410nfs_defconfig ++ arch/arm/configs/smdk6410onenand_defconfig ++ arch/arm/configs/smdk6410ramdisk_defconfig ++ arch/arm/mach-s3c6400/include/mach/map.h ++ arch/arm/mach-s3c6410/mach-smdk6410.c ++ arch/arm/plat-s3c/include/plat/devs.h ++ arch/arm/plat-s3c64xx/devs.c ++ drivers/media/video/samsung/Kconfig ++ drivers/media/video/samsung/Makefile ++ drivers/video/samsung/s3cfb.c ++ drivers/video/samsung/s3cfb_fimd4x.c ++ ++v2.6.28.6-s3c64xx-r1: Jonghun Han ++ - Official Release (09.03.06) ++ ++v2.6.28.6-s3c64xx-r1d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r1d1 : Byungjae Lee ++ - implemented s3c6410 OTG host role for Mass storage only ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/usb/Makefile ++ M drivers/usb/host/Kconfig ++ M drivers/usb/host/Makefile ++ ++ Added Files: ++ A drivers/usb/host/s3c-otg/* ++ ++v2.6.28.6-s3c64xx-r1d2 : Byungjae Lee ++ - implemented s3c6410 OTG host role for HID(Keyboard, Mouse) ++ and Card Reader ++ ++ Modified Files: ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-driver.c ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-hcd.c ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-kal.h ++ M drivers/usb/host/s3c-otg/s3c-otg-scheduler-ischeduler.c ++ M drivers/usb/host/s3c-otg/s3c-otg-scheduler-scheduler.h ++ M drivers/usb/host/s3c-otg/s3c-otg-transfer-common.c ++ M drivers/usb/host/s3c-otg/s3c-otg-transferchecker-common.c ++ ++v2.6.28.6-s3c64xx-r1d3 : Jongpill Lee ++ - defect is fixed on cpufreq driver ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/clock.c ++ ++v2.6.28.6-s3c64xx-r1d4 : Jongpill Lee ++ - defect is fixed on pm ++ ++ MOdified Fils: ++ M arch/arm/plat-s3c64xx/pm.c ++ ++v2.6.28.6-s3c64xx-r1d5: Kyoungil Kim ++ - Just Second Prevent tag for SMDK6410 ++ ++v2.6.28.6-s3c64xx-r1d6 : Jonghun Han ++ - update S3C6410 FIMG-2D driver ++ ++ Modified Fils: ++ M arch/arm/plat-s3c/include/plat/regs-g2d.h ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++v2.6.28.6-s3c64xx-r2: Kyoungil Kim ++ - Official Release (09.03.09) ++ ++v2.6.28.6-s3c64xx-r2d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r2d1: Jaeryul Oh ++ - Fixed Bug in case of rotator function of MFC ++ ++ Modified Files: ++ M drivers/media/video/samsung/mfc/s3c_mfc_instance.c ++ ++v2.6.28.6-s3c64xx-r2d2: Jonghun Han ++ - S3C6410 FIMG-3D driver support ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/char/s3c_mem.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++ Added Files: ++ A drivers/media/video/samsung/g3d/Kconfig ++ A drivers/media/video/samsung/g3d/Makefile ++ A drivers/media/video/samsung/g3d/s3c_fimg3d.c ++ A drivers/media/video/samsung/g3d/s3c_fimg3d.h ++ ++v2.6.28.6-s3c64xx-r2d3: Jonghun Han ++ - S5PC100 FIMG-2D driver support ++ ++ Modified Files: ++ M drivers/media/video/samsung/g2d/Kconfig ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++v2.6.28.6-s3c64xx-r3: Kyoungil Kim ++ - Official Release (09.03.13) ++ ++v2.6.28.6-s3c64xx-r3d0: Kyoungil Kim ++ ++v2.6.28.6-s3c64xx-r3d1: Byungae Lee ++ - Support SMDK6410 USB Serial Gadget (with CDC ACM) ++ ++ Modified Files: ++ M arch/arm/plat-s3c/include/plat/regs-otg.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_slave.c ++ ++v2.6.28.6-s3c64xx-r3d2: Byungae Lee ++ - Removed warning on the debug message for the USB Gadget ++ ++ Modified Files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ ++v2.6.28.6-s3c64xx-r3d3: SungJun Bae ++ - Support CMM driver. ++ ++ Added Files: ++ A drivers/media/video/samsung/cmm/CMMMisc.c ++ A drivers/media/video/samsung/cmm/CMMMisc.h ++ A drivers/media/video/samsung/cmm/Kconfig ++ A drivers/media/video/samsung/cmm/LogMsg.c ++ A drivers/media/video/samsung/cmm/LogMsg.h ++ A drivers/media/video/samsung/cmm/Makefile ++ A drivers/media/video/samsung/cmm/s3c-cmm.c ++ A drivers/media/video/samsung/cmm/s3c-cmm.h ++ ++ Modified Files: ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++ ++v2.6.28.6-s3c64xx-r4: Jonghun Han ++ - Official Release (09.03.24) ++ ++v2.6.28.6-s3c64xx-r4d0: Jonghun Han ++ ++v2.6.28.6-s3c64xx-r4d1: Kyoungil Kim ++ - The last tag for s3c64xx branch(09.03.24) ++ ++rel-0-0-0 : Kwanghyun La (Nov.10.2008) ++ It's not fixed version , just only initial copy version for ++ estimation. ++ ++previous samsung-ap-2.6 repository ChangeLog_s5pc1xx for s5pc1xx branch ++----------------------------------------------------------------------- ++dev-0-0-1 : Ilho Lee ++dev-0-0-2 : Ilho Lee ++ Touchscreen D/D added, but Ethernet D/D is being adding. ++ ++dev-0-0-3 : Jongpill Lee ++ Support ADC driver and merge adc-s3c64xx.c and adc-s3c24xx.c file ++ ++ Removed Files: ++ R A arch/arm/plat-s3c64xx/adc-s3c64xx.c ++ ++ Added Files: ++ A arch/arm/plat-s3c/adc.c ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/adc.h ++ M drivers/char/Kconfig ++ ++dev-0-0-4 : Jongpill Lee ++ Bug fixed on ADC driver ++ ++ Modified Files: ++ M arch/arm/plat-s3c/adc.c ++ ++dev-0-0-5 : Ilho Lee ++ SMC9115 ethernet D/D is working(small_root only) ++ ++dev-0-0-6: Jinsung Yang ++ - NAND driver support ++ ++ Added files: ++ A arch/arm/configs/smdk6410mtd_defconfig ++ A arch/arm/plat-s3c/include/plat/partition.h ++ A drivers/mtd/nand/s3c_nand.c ++ ++ Modified files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/nand.h ++ M arch/arm/plat-s3c/include/plat/regs-nand.h ++ M arch/arm/plat-s3c64xx/devs.c ++ M drivers/mtd/nand/Kconfig ++ M drivers/mtd/nand/Makefile ++ ++dev-0-0-7: Sungjun Bae ++ - I2S WM8580, I2SWM8990 Complete. ++ ++ Modified Files: ++ M arch/arm/configs/smdk6410mtd_defconfig arch/arm/configs/smdk6410nfs_defconfig ++ M arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h include/sound/soc.h ++ M sound/soc/soc-core.c sound/soc/codecs/wm8580.c sound/soc/codecs/wm8990.c ++ ++dev-0-0-8: Sungjun Bae ++ - DMA File Structure was changed. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ M arch/arm/plat-s3c64xx/Makefile ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl080.c ++ Removed Files: ++ R arch/arm/plat-s3c64xx/dma-pl080.c ++ ++dev-0-0-9: Ilho Lee ++ - PL330 DMA D/D file added ++ ++ Modified Files: ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/Kconfig ++ ++ Added Files: ++ A arch/arm/plat-s3c/dma-pl330.c ++ A arch/arm/plat-s3c/dma-pl330-microcode.c ++ ++ ++dev-0-0-10: eyryu ++ - Add SMDKC100 initial. ++ ++dev-0-0-11: Ilho Lee ++ - DMA definition files changed ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ ++dev-0-0-12: Jinsung Yang ++ - gpiolib support for s5pc1xx architecture ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h ++ M arch/arm/mach-s5pc100/include/mach/gpio.h ++ M arch/arm/plat-s3c/gpio-config.c ++ M arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/gpiolib.c ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-a1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-b.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-c.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-d.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-e1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-f3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-g3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-h3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-i.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-j4.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k0.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k1.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k2.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-k3.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp00.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp01.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp02.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp03.h ++ A arch/arm/plat-s5pc1xx/include/plat/gpio-bank-mp04.h ++ ++dev-0-0-13: eyryu ++ - Add SMDKC100 clock & serial ++ ++dev-0-0-14: Ilho Lee ++ - ADC D/D added ++ ++ Added Files: ++ A arch/arm/plat-s3c24xx/adc.c ++ A arch/arm/plat-s3c64xx/adc.c ++ ++dev-0-0-15: eyryu ++ - Support SMDKC100 UART driver ++ - Add SMDKC100 clock & serial ++ ++rel-1-0-0: Kyoungil Kim ++ - Official Release (08.11.27) ++ ++dev-1-0-0: Kyoungil Kim ++ ++dev-1-0-1: Ilho Lee ++ - CPU idle added ++ ++ Added Files: ++ A arch/arm/mach-s3c6400/idle.h ++ A arch/arm/mach-s5pc100/idle.h ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s5pc100/cpu.c ++ ++dev-1-0-2: Ilho Lee ++ - S3C24XX -> S3C changed in the S3C DMA D/D. ++ ++ Modified Files: ++ M arch/arm/mach-s3c6410/dma.c ++ M arch/arm/mach-s5pc100/dma.c ++ M arch/arm/plat-s3c/dma-pl080.c ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/include/plat/s3c-dma.h ++ ++dev-1-0-3: Ilho Lee ++ - PL330 DMA D/D is adding.. ++ ++ Modified Files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/dma-pl330-mcode.h ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ ++dev-1-0-4: Byungjae Lee ++ - Support File Storage Gadget for SMDK6410 HS USB OTG ++ ++ Modified Files: ++ M arch/arm/mach-s3c6400/include/mach/map.h ++ M arch/arm/mach-s3c6410/cpu.c ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/plat-s3c64xx/devs.c ++ M arch/arm/plat-s3c64xx/include/plat/regs-clock.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/Makefile ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/gadget_chips.h ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-otg.h ++ A drivers/usb/gadget/s3c_udc.h ++ A drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-5: Ilho Lee ++ - S3C touchscreen D/D changed. ++ ++ Modified Files: ++ M drivers/input/touchscreen/s3c-ts.c ++ ++dev-1-0-6: Jinsung Yang ++ - Clock system support for S5PC100 ++ ++ Modified files: ++ M arch/arm/plat-s3c/clock.c ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M arch/arm/plat-s5pc1xx/include/plat/pll.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ ++dev-1-0-7: Jinsung Yang ++ - LCD (LTE480WV) support for SMDKC100 ++ ++ Modified files: ++ drivers/video/samsung/s5pfb_fimd5x.c ++ ++dev-1-0-8: Byungjae Lee ++ - Masked HCLK for USB OTG at register clocks ++ ++ Modified files: ++ M arch/arm/plat-s3c64xx/clock.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++dev-1-0-9: Ilho Lee ++ - Ext-interrupts handlers added. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-10: Ilho Lee ++ - SMC9115 ethernet(100Mbps) D/D ported. ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/irq-eint.c ++ ++dev-1-0-11: Ilho Lee ++ - dev-adc.c deleted. ++ ++ Deleted Files: ++ D arch/arm/plat-s3c/dev-adc.c ++ ++rel-1-0-1: Kyoungil Kim ++ - Git Release (08.12.09) ++ ++v2.6.28-rc7-s5pc1xx-r0d0: Kyoungil Kim ++ - s5pc1xx rc7 initial git tag ++ ++v2.6.28-rc7-s5pc1xx-r0d1: Ilho Lee ++ - PL330 DMA D/D changed. ++ ++ Modified files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/dma-pl330-mcode.h ++ ++v2.6.28-rc7-s5pc1xx-r0d2: Jongpill Lee ++ - System Timer support on SMDKC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28-rc7-s5pc1xx-r0d3: Jongpill Lee ++ - System Timer bug fixed ++ ++ Modified Files: ++ M ChangeLog_s5pc1xx ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/include/mach/tick.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/Makefile ++ M arch/arm/plat-s3c/include/plat/map-base.h ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s5pc1xx/include/plat/regs-sys-timer.h ++ ++v2.6.28-rc8-s5pc1xx: Kyoungil Kim ++ - s5pc1xx rc8 patch ++ ++v2.6.28-rc8-s5pc1xx-r0d0: Kyoungil Kim ++ ++v2.6.28-rc8-s5pc1xx-r0d1: Abhilash Kesavan ++ - S5PC100 NAND driver support ++ ++ Added Files: ++ A arch/arm/configs/smdkc100mtd_defconfig ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/partition.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/mtd/nand/Kconfig ++ M drivers/mtd/nand/s3c_nand.c ++ ++v2.6.28-rc8-s5pc1xx-r0d2: Jinsung Yang ++ - Fix for wrong comments ++ ++v2.6.28-rc8-s5pc1xx-r0d3: Jinsung Yang ++ - Merge from s3c64xx branch ++ ++v2.6.28-rc8-s5pc1xx-r0d4: Abhilash Kesavan ++ - Touch-up for Nand ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ ++ ++v2.6.28-rc8-s5pc1xx-r0d5: Abhilash Kesavan ++ - Support for HS-MMC and USB ++ ++ Added Files: ++ A arch/arm/mach-s5pc100/include/mach/usb-control.h ++ A arch/arm/mach-s5pc100/setup-sdhci.c ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/Kconfig ++ M arch/arm/mach-s5pc100/Makefile ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/sdhci.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-sys.h ++ M drivers/mmc/host/Kconfig ++ M drivers/mmc/host/sdhci-s3c.c ++ M drivers/usb/Kconfig ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/f_rndis.c ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/host/ohci-hcd.c ++ M drivers/usb/host/ohci-s3c2410.c ++ ++v2.6.28-rc8-s5pc1xx-r0d6: Ilho Lee ++ - Touchscreen D/D got enabled and PL330 S&G DMA operations supported. ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/dma-pl330.c ++ ++v2.6.28-rc8-s5pc1xx-r0d7: Abhilash Kesavan ++ - Support for HS-MMC for S5PC1XX (Completed) ++ ++ Added Files: ++ A drivers/mmc/host/s3c-hsmmc.c ++ A drivers/mmc/host/s3c-hsmmc.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-hsmmc.h ++ ++ Deleted Files: ++ D arch/arm/mach-s5pc100/setup-sdhci.c ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/Kconfig ++ M arch/arm/mach-s5pc100/Makefile ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/mmc/host/Kconfig ++ M drivers/mmc/host/Makefile ++ ++v2.6.28-rc8-s5pc1xx-r0d8: Jongpill Lee ++ - Bug fixed on clock ++ ++ Modified Files: ++ M arch/arm/plat-s3c/clock.c ++ ++v2.6.28-rc8-s5pc1xx-r0d9: Abhilash Kesavan ++ - Support for ADC and PWM for S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/adc.c ++ A arch/arm/plat-s5pc1xx/pwm-s5pc100.c ++ A arch/arm/plat-s5pc1xx/pwm-s5pc100.h ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/Kconfig ++ M arch/arm/plat-s3c/include/plat/regs-timer.h ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M drivers/mmc/host/s3c-hsmmc.c ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28-rc8-s5pc1xx-r1: Kyoungil Kim ++ - Internal Release(09.01.12) ++ ++v2.6.28-rc8-s5pc1xx-v1: Kyoungil Kim ++ - Official Release(09.01.12) ++ ++v2.6.28-rc8-s5pc1xx-r1d0: Kyoungil Kim ++ ++v2.6.28-rc8-s5pc1xx-r1d1: JongPill Lee ++ - Support IDLE Function on S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/include/plat/regs-power.h ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/cpu.c ++ M arch/arm/mach-s5pc100/include/mach/system.h ++ ++v2.6.28-rc8-s5pc1xx-r1d2: Abhilash Kesavan ++ - Support OneNand on S5PC100 (I) ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-onenand.h ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s3c/include/plat/partition.h ++ M drivers/mtd/onenand/Makefile ++ M drivers/mtd/onenand/onenand_bbt.c ++ M drivers/mtd/onenand/s3c_onenand.c ++ M drivers/mtd/onenand/s3c_onenand.h ++ ++v2.6.28-rc8-s5pc1xx-r1d3: Kyoungil Kim ++ - Support Keypad on S5PC100 ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100_defconfig ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/input/keyboard/Kconfig ++ M drivers/input/keyboard/s3c-keypad.h ++ ++v2.6.28-rc8-s5pc1xx-r1d4: Abhilash Kesavan ++ - Support HS-SPI on S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s3c/include/plat/regs-spi.h ++ A drivers/spi/hspi-s3c.c ++ A drivers/spi/hspi-s3c.h ++ A drivers/spi/spi-dev.c ++ A drivers/spi/spi-dev.h ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/spi/Kconfig ++ M drivers/spi/Makefile ++ ++v2.6.28-rc8-s5pc1xx-r1d5: Jongpill Lee ++ - Support APM on S5PC100 ++ ++ Added Files: ++ A arch/arm/plat-s5pc1xx/include/plat/pm.h ++ A arch/arm/plat-s5pc1xx/pm.c ++ A arch/arm/mach-s5pc100/pm.c ++ A arch/arm/plat-s5pc1xx/sleep.S ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/Makefile ++ M arch/arm/mach-s5pc100/include/mach/regs-irq.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s5pc1xx/include/plat/regs-power.h ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M drivers/serial/s5pc100.c ++ M drivers/serial/samsung.c ++ M drivers/serial/samsung.h ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28-rc8-s5pc1xx-r1d6: Jongpill Lee ++ - Support RTC Wakeup from Sleep mode ++ ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/pm.c ++ ++v2.6.28-rc8-s5pc1xx-r1d7: PyoungJae Jung/Jiun Yu ++ - Support MFC driver ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ ++v2.6.28-rc8-s5pc1xx-r2: Kyoungil Kim ++ - Official Release(09.01.23) ++ ++v2.6.28-rc8-s5pc1xx-r2d0: Kyoungil Kim ++ ++v2.6.28-rc8-s5pc1xx-r2d1: Byungjae Lee ++ - Support CDC Ethernet and RNDIS ++ - for SMDKc100 UBS OTG Deive role on DMA mode ++ ++ Modified Files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/regs-otg.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/epautoconf.c ++ M drivers/usb/gadget/s3c_udc.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ M drivers/usb/gadget/u_ether.c ++ ++ Added Files: ++ A drivers/usb/gadget/s3c_udc_otg_xfer_dma.c ++ A drivers/usb/gadget/s3c_udc_otg_xfer_slave.c ++ ++ ++v2.6.28-rc8-s5pc1xx-r2d2: Jinsung Yang ++ - S5PC100 FIMC Driver ++ - Compilable version ++ ++ Modified files: ++ M drivers/media/video/Kconfig ++ M drivers/media/video/Makefile ++ M include/linux/i2c-id.h ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/include/plat/fimc.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-fimc.h ++ A drivers/media/video/samsung/Kconfig ++ A drivers/media/video/samsung/Makefile ++ A drivers/media/video/samsung/s3c_fimc.h ++ A drivers/media/video/samsung/s3c_fimc4x_regs.c ++ A drivers/media/video/samsung/s3c_fimc_cfg.c ++ A drivers/media/video/samsung/s3c_fimc_core.c ++ A drivers/media/video/samsung/s3c_fimc_v4l2.c ++ A drivers/media/video/samsung/s5k4ba.c ++ A drivers/media/video/samsung/s5k4ba.h ++ ++v2.6.28-rc8-s5pc1xx-r2d3: Jinsung Yang ++ - S5PC100 FIMC device setup support ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/dev-fimc0.c ++ A arch/arm/plat-s5pc1xx/dev-fimc1.c ++ A arch/arm/plat-s5pc1xx/dev-fimc2.c ++ A arch/arm/plat-s5pc1xx/setup-fimc0.c ++ A arch/arm/plat-s5pc1xx/setup-fimc1.c ++ A arch/arm/plat-s5pc1xx/setup-fimc2.c ++ ++v2.6.28-rc8-s5pc1xx-r2d4: Kyoungil Kim ++ - modified otg_phy_init proto type ++ ++ Modified files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28-rc8-s5pc1xx-r2d5: Hatim Ali ++ - S5PC100 Watchdog Timer support ++ ++ Modified files: ++ M arch/arm/configs/smdkc100nfs_defconfig ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/watchdog/Kconfig ++ ++v2.6.28-rc8-s5pc1xx-r2d6: Abhilash Kesavan ++ - S5PC100 AC97 WM9713 support ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/dma.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M sound/soc/codecs/wm9713.c ++ M sound/soc/s5pc1xx/Kconfig ++ M sound/soc/s5pc1xx/Makefile ++ ++ Added Files: ++ A sound/soc/s5pc1xx/s5pc1xx-ac97.c ++ A sound/soc/s5pc1xx/s5pc1xx-ac97.h ++ A sound/soc/s5pc1xx/smdkc100_wm9713.c ++ ++v2.6.28-rc8-s5pc1xx-r2d7: Jinsung Yang ++ - S5PC100 FIMC driver ++ - Camera input and memory output support ++ - Both camera channels (A and B) support ++ - Preview and capture related functionalities support ++ - S5K3BA and S5K4BA module support ++ ++v2.6.28-rc8-s5pc1xx-r2d8: Hatim Ali ++ - S5PC100 Notification LED support ++ ++ Modified files: ++ M arch/arm/Kconfig ++ M arch/arm/mach-s5pc100/Makefile ++ ++ Added Files: ++ A arch/arm/mach-s5pc100/leds-s5pc100.c ++ A arch/arm/mach-s5pc100/leds.c ++ A arch/arm/mach-s5pc100/leds.h ++ ++v2.6.28-rc8-s5pc1xx-r2d9: Abhilash Kesavan ++ - Enabled LCD/OSD Support for S5PC100 ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/video/samsung/s3cfb.h ++ M drivers/video/samsung/s3cfb_spi.c ++ ++v2.6.28-rc8-s5pc1xx-r2d10: Jinsung Yang ++ - S5PC100 FIMC driver ++ - Alpha Release ++ - Camera input support ++ - Memory input support ++ - Memory output support ++ - LCD FIFO output support ++ - Both camera channels (A and B) support ++ - Preview and capture related functionalities support ++ - S5K3BA and S5K4BA module support ++ ++v2.6.28.6-s5pc1xx: Kyoungil Kim ++ ++v2.6.28.6-s5pc1xx-r0d0: Kyoungil Kim ++ ++v2.6.28.6-s5pc1xx-r0d1: Abhilash Kesavan ++ - Pre-Beta Version ++ ++v2.6.28.6-s5pc1xx-r0d2: Jinsung Yang ++ - FIMC support for SMDKC100 ++ - Including reserved memory feature with bootmem ++ - All functions have been finished on the planning except for 'Input Rotator' with LCD FIFO Output ++ ++ ++v2.6.28.6-s5pc1xx-r0d3: Abhilash Kesavan ++ - IrDA support for S5PC100 ++ ++ Modified files: ++ M drivers/net/irda/s3c-sir.c ++ M include/net/irda/irda_device.h ++ ++v2.6.28.6-s5pc1xx-r0d4: Jae-Cheol Lee ++ - Support CPUFREQ for SMDKC100 ++ - DFS is only enabled, not DVS. ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ M arch/arm/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s3c/clock.c ++ ++ Added files: ++ A arch/arm/plat-s5pc1xx/s5pc1xx-cpufreq.c ++ A arch/arm/plat-s5pc1xx/changediv.S ++ A arch/arm/plat-s5pc1xx/ltc3714.c ++ ++v2.6.28.6-s5pc1xx-r0d5: Kukjin Kim ++ - System Timer Modified for EVT1 ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/include/plat/regs-sys-timer.h ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-s5pc1xx-r0d6: Jonghun Han ++ - S5PC100 FIMG-2D driver support ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/regs-g2d.h ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/media/video/samsung/g2d/Kconfig ++ M drivers/media/video/samsung/g2d/s3c_fimg2d2x.c ++ ++v2.6.28.6-s5pc1xx-r0d7: Jae-Cheol Lee ++ - Support SMDKC100 EVT1 POP type (Onenand+mDDR+OneDRAM) ++ Modified files: ++ M arch/arm/configs/smdkc100onenand_defconfig ++ M arch/arm/plat-s5pc1xx/cpu.c ++ M arch/arm/plat-s5pc1xx/s5pc100-clock.c ++ ++v2.6.28.6-s5pc1xx-r0d8: PyoungJae Jung/JiUn Yu ++ - Support MFC (FIMV) for s5pc100 ++ - MFC driver is Alpha version ++ - remove CMM support and support bootmem memory secure way ++ - change directory name to separate to S3C6410 MFC driver ++ ++ Added files: ++ A drivers/media/video/samsung/mfc40/command_control_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_errorno.h ++ A drivers/media/video/samsung/mfc40/h263_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_fw.h ++ A drivers/media/video/samsung/mfc40/h264_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c-mfc.h ++ A drivers/media/video/samsung/mfc40/h264_enc_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_interface.h ++ A drivers/media/video/samsung/mfc40/Kconfig ++ A drivers/media/video/samsung/mfc40/s3c_mfc_intr.c ++ A drivers/media/video/samsung/mfc40/Makefile ++ A drivers/media/video/samsung/mfc40/s3c_mfc_intr.h ++ A drivers/media/video/samsung/mfc40/mp2_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.c ++ A drivers/media/video/samsung/mfc40/mp4_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.h ++ A drivers/media/video/samsung/mfc40/mp4_dec_order_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_memory.c ++ A drivers/media/video/samsung/mfc40/mp4_enc_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_memory.h ++ A drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_opr.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.h ++ A drivers/media/video/samsung/mfc40/s3c_mfc_opr.h ++ A drivers/media/video/samsung/mfc40/s3c-mfc.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_types.h ++ A drivers/media/video/samsung/mfc40/s3c_mfc_common.c ++ A drivers/media/video/samsung/mfc40/vc1_dec_fw.c ++ A drivers/media/video/samsung/mfc40/s3c_mfc_common.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-mfc.h ++ ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ ++v2.6.28.6-s5pc1xx-r0d9: Jonghun Han ++ - S5PC100 FIMG-3D driver support ++ Modified files: ++ M arch/arm/plat-s3c/dma-pl330.c ++ M arch/arm/plat-s3c/include/mach/s3c-dma.h ++ M drivers/char/s3c_mem.c ++ M drivers/char/s3c_mem.h ++ M drivers/media/video/samsung/g3d/Kconfig ++ M drivers/media/video/samsung/g3d/s3c_fimg3d.h ++ ++v2.6.28.6-s5pc1xx-r0d10: Seungchull Suh ++ - SMC9115 works correctly. Before, full-duplex mode is not set. ++ M drivers/net/smc911x.c ++ ++ ++v2.6.28.6-s5pc1xx-r1: Kyoungil Kim ++ - Official Release(09.03.20) ++ ++v2.6.28.6-s5pc1xx-r1d0: Kyoungil Kim ++ ++v2.6.28.6-s5pc1xx-r1d1: Jaeryul Oh ++ - Support JPEG for s5pc100 ++ ++ Added files: ++ A drivers/media/video/samsung/jpeg_v2/jpg_mem.c ++ A drivers/media/video/samsung/jpeg_v2/jpg_misc.c ++ A drivers/media/video/samsung/jpeg_v2/s3c-jpeg.c ++ A drivers/media/video/samsung/jpeg_v2/jpg_opr.c ++ A drivers/media/video/samsung/jpeg_v2/log_msg.c ++ ++ A drivers/media/video/samsung/jpeg_v2/log_msg.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_conf.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_mem.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_misc.h ++ A drivers/media/video/samsung/jpeg_v2/regs-jpeg.h ++ A drivers/media/video/samsung/jpeg_v2/s3c-jpeg.h ++ A drivers/media/video/samsung/jpeg_v2/jpg_opr.h ++ A drivers/media/video/samsung/jpeg_v2/Makefile ++ A drivers/media/video/samsung/jpeg_v2/Kconfig ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/Makefile ++ ++v2.6.28.6-s5pc1xx-r1d2: Kyoungil Kim ++ - The last tag for s5pc1xx branch(09.03.24) ++ ++current linux-2.6-samsung repository ChangeLog ++----------------------------------------------------------------------- ++v2.6.28.6-samsung: Kyoungil Kim ++ - Merge s3c64xx branch and s5pc1xx branch to master branch(09.03.24) ++ ++v2.6.28.6-samsung-r0d0: Kyoungil Kim ++ ++v2.6.28.6-samsung-r0d1: Kukjin Kim ++ - Remove swp file ++ ++ Removed Files: ++ R arch/arm/plat-s3c/include/plat/.cpu-freq.h.swp ++ ++v2.6.28.6-samsung-r0d2: Kyoungil Kim ++ - Unified the ChangeLog files ++ ++ Modified Files: ++ M ChangeLog ++ ++ Deleted Files: ++ D ChangeLog_s3c64xx ++ D ChangeLog_s5pc1xx ++ ++v2.6.28.6-samsung-r0d3: Kukjin Kim ++ - System Timer initialize modified ++ ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-samsung-r0d4: Kukjin Kim ++ - System Timer init and setup function remodified ++ ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-samsung-r0d5: Kukjin Kim ++ - Support extcsd revision 1.3 ++ ++ Modified Files: ++ M drivers/mmc/core/mmc.c ++ ++v2.6.28.6-samsung-r0d6: Jaeryul Oh ++ - JPEG for c100 is updated ++ ++ Modified Files: ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/jpeg_v2/jpg_mem.h ++ M drivers/media/video/samsung/jpeg_v2/jpg_opr.c ++ M drivers/media/video/samsung/jpeg_v2/jpg_opr.h ++ M drivers/media/video/samsung/jpeg_v2/s3c-jpeg.c ++ M drivers/media/video/samsung/jpeg_v2/s3c-jpeg.h ++ ++v2.6.28.6-samsung-r0d7: Jae-Cheol Lee ++ - Adopting system timer h/w bug workaround ++ ++ Modified files: ++ M arch/arm/plat-s5pc1xx/s5pc1xx-time.c ++ ++v2.6.28.6-samsung-r0d8: Byungjae Lee ++ - Implemented OTG Host role for SMDKC100 ++ OTG Host role support only MassStorage and HID(Keyboard, Mouse) ++ ++ Modified Files: ++ M arch/arm/configs/smdkc100mtd_defconfig ++ M arch/arm/configs/smdkc100onenand_defconfig ++ M arch/arm/mach-s3c6410/mach-smdk6410.c ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s5pc1xx/devs.c ++ M drivers/usb/host/Kconfig ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-debug.h ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-driver.c ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-driver.h ++ M drivers/usb/host/s3c-otg/s3c-otg-hcdi-hcd.h ++ M drivers/usb/host/s3c-otg/s3c-otg-oci.c ++ M drivers/usb/host/s3c-otg/s3c-otg-oci.h ++ ++v2.6.28.6-samsung-r0d9: Jonghun Han ++ - Support YUV422 Interleave output for FIMC ++ ++ Modified Files: ++ M drivers/media/video/samsung/fimc/s3c_fimc.h ++ M drivers/media/video/samsung/fimc/s3c_fimc3x_regs.c ++ M drivers/media/video/samsung/fimc/s3c_fimc_cfg.c ++ ++v2.6.28.6-samsung-r0d10: Kyoungil Kim ++ - change the smc911 driver from full duplex to half duplex ++ ++ Modified Files: ++ M drivers/net/smc911x.c ++ ++v2.6.28.6-samsung-r0d11: Jae-Cheol Lee ++ - Support SMDK6440 EVT0 board ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s5p64xx/include/plat/pll.h ++ ++v2.6.28.6-samsung-r0d12: Kyoungil Kim ++ - Prevent for SMDKC100 MM IP ++ ++v2.6.28.6-samsung-r0d13: Jae-Cheol Lee ++ - Fixed PLL calculation bug in MASK value ++ ++ Modified Files: ++ M arch/arm/plat-s3c64xx/include/plat/pll.h ++ M arch/arm/plat-s5pc1xx/include/plat/pll.h ++ ++v2.6.28.6-samsung-r0d14: Byungjae Lee ++ - Implemented USB OTG Device role for SMDK6440 ++ ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/regs-otg.h ++ M arch/arm/plat-s5p64xx/devs.c ++ M arch/arm/plat-s5p64xx/include/plat/regs-clock.h ++ M drivers/usb/gadget/Kconfig ++ M drivers/usb/gadget/s3c_udc.h ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28.6-samsung-r0d15: Jongpill Lee ++ - Modify code for SPi ++ ++ Modified Files ++ M drivers/spi/hspi-s3c64xx.c ++ ++v2.6.28.6-samsung-r1: Jaeryul Oh ++ - Official Release (09.04.06) ++ ++v2.6.28.6-samsung-r1d0: Jae-Cheol Lee ++ - Modified default configuration for SMDK6440 ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ ++v2.6.28.6-samsung-r1d1: Jaeryul Oh ++ - MFC, JPEG suspend/resume related code for SMDK6410 changed ++ Modified Files : ++ M drivers/media/video/samsung/jpeg/jpg_mem.c ++ M drivers/media/video/samsung/jpeg/s3c-jpeg.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ ++v2.6.28.6-samsung-r1d2: Jae-Cheol Lee ++ - Modified voltage regulator control code for SMDKC100 ++ Modified Files : ++ M arch/arm/plat-s5pc1xx/ltc3714.c ++ ++v2.6.28.6-samsung-r1d3: Jae-Cheol Lee ++ - Support CHIPID for S5P6440 ++ Modified Files: ++ M arch/arm/plat-s5pc1xx/cpu.c ++ ++v2.6.28.6-samsung-r1d4: Jiun Yu, PyoungJae Jung ++ - fixed cache issue in MFC driver ++ ++v2.6.28.6-samsung-r1d5: Jae-Cheol Lee ++ - Change Console UART port 0 -> 1 for SMDK6440 ++ Modified Files: ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ ++v2.6.28.6-samsung-r1d6: Byungjae Lee ++ - Fixed BUG USB OTG Device role for SMDK6440 and C100 ++ ++ Modified Files: ++ M drivers/usb/gadget/s3c_udc_otg.c ++ ++v2.6.28.6-samsung-r1d7: Jongpill LEe ++ - Support RTC for S5P6440 ++ ++ Modified files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/regs-rtc.h ++ M arch/arm/plat-s5p64xx/devs.c ++ M drivers/rtc/Kconfig ++ M drivers/rtc/rtc-s3c.c ++ ++v2.6.28.6-samsung-r2: Kyoungil Kim ++ - Official Release for SMDK6410(09.04.09) ++ ++v2.6.28.6-samsung-r2d0: Jongpill LEe ++ - Support Watchdog timer for S5P6440 ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s5p64xx/devs.c ++ M drivers/rtc/rtc-s3c.c ++ M drivers/watchdog/Kconfig ++ ++v2.6.28.6-samsung-r2d1: Jongpill Lee ++ - Support ADC Driver for S5P6440 ++ ++ Modified Files: ++ M arch/arm/mach-s5p6440/include/mach/map.h ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c64xx/adc.c ++ M arch/arm/plat-s5p64xx/Kconfig ++ M arch/arm/plat-s5p64xx/devs.c ++ ++v2.6.28.6-samsung-r2d2: Jiun, Yu, PyoungJae Jung ++ - fixed cache issue in MFC1.0(6410) driver ++ ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc_set_config.c ++ ++v2.6.28.6-samsung-r2d3: Jiun, Yu, PyoungJae Jung ++ - fixed cache issue in MFC1.0(6410) driver ++ - changed cache update way to dma_cache_maint ++ ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc_set_config.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_databuf.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_instance.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_set_config.c ++ ++v2.6.28.6-samsung-r2d4: Jae-Cheol Lee ++ - Support DVFS on SMDK6440 board ++ ++ Modified Files : ++ M arch/arm/Kconfig ++ M arch/arm/plat-s5p64xx/Makefile ++ M arch/arm/plat-s5p64xx/clock.c ++ M arch/arm/plat-s5p64xx/ltc3714.c ++ M arch/arm/plat-s5p64xx/s5p64xx-cpufreq ++ ++v2.6.28.6-samsung-r2d5: Jongpill Lee ++ - Modify some code for S5PC100 ++ ++ Modified Files : ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M arch/arm/plat-s5pc1xx/include/plat/regs-power.h ++ ++v2.6.28.6-samsung-r2d6: Jae-Cheol Lee ++ - Support backlight class by PWM on SMDK6440 board ++ ++ Added Files : ++ A arch/arm/plat-s5p64xx/pwm.c ++ ++ Modified Files : ++ M arch/arm/configs/smdk6440ramdisk_defconfig ++ M arch/arm/mach-s5p6440/cpu.c ++ M arch/arm/mach-s5p6440/mach-smdk6440.c ++ M arch/arm/plat-s3c/include/plat/clock.h ++ M arch/arm/plat-s3c/pwm-clock.c ++ M arch/arm/plat-s5p64xx/Kconfig ++ M arch/arm/plat-s5p64xx/Makefile ++ M arch/arm/plat-s5p64xx/clock.c ++ M arch/arm/plat-s5p64xx/pwm.c ++ M drivers/video/samsung/s3cfb_fimd5x.c ++ ++v2.6.28.6-samsung-r2d7: Jaeryul Oh ++ - MFC suspend/resume related code for SMDK6410 updated ++ Modified Files : ++ M drivers/media/video/samsung/mfc10/s3c_mfc.c ++ M drivers/media/video/samsung/mfc10/s3c_mfc_config.h ++ ++v2.6.28.6-samsung-r2d8: Jinsung Yang ++ - The 1st phase of MIPI-CSI support ++ ++ Addes files: ++ A arch/arm/plat-s5pc1xx/dev-csis.c ++ A arch/arm/plat-s5pc1xx/include/plat/csis.h ++ A arch/arm/plat-s5pc1xx/include/plat/regs-csis.h ++ A arch/arm/plat-s5pc1xx/setup-csis.c ++ A drivers/media/video/samsung/fimc/s3c_csis.c ++ A drivers/media/video/samsung/fimc/s3c_csis.h ++ ++ Modified files: ++ M arch/arm/mach-s5pc100/include/mach/map.h ++ M arch/arm/mach-s5pc100/mach-smdkc100.c ++ M arch/arm/plat-s3c/include/plat/devs.h ++ M arch/arm/plat-s5pc1xx/Kconfig ++ M arch/arm/plat-s5pc1xx/Makefile ++ M arch/arm/plat-s5pc1xx/clock.c ++ M arch/arm/plat-s5pc1xx/include/plat/regs-clock.h ++ M drivers/media/video/samsung/fimc/Kconfig ++ M drivers/media/video/samsung/fimc/Makefile ++ M drivers/media/video/samsung/fimc/s3c_fimc.h ++ ++v2.6.28.6-samsung-mfc-r0: PyoungJae Jung, Jiun Yu ++ - first initial version of MFC branch ++ - upgraded MFC40 driver ++ - updated FW ++ - supported multi-instance ++ - unstable version ++ ++ Addeds files: ++ A drivers/media/video/samsung/mfc40/s3c_mfc_msg.h ++ ++ Modified files: ++ M drivers/media/video/samsung/Kconfig ++ M drivers/media/video/samsung/mfc40/Kconfig ++ M drivers/media/video/samsung/mfc40/s3c-mfc.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_common.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_interface.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_intr.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_opr.c ++ ++ Deleted files: ++ D drivers/media/video/samsung/mfc40/s3c-mfc.h ++ ++v2.6.28.6-samsung-mfc-r0d0: PyoungJae Jung, Jiun Yu ++ - updated new MFC driver ++ - fixed bugs in memory manager unit in multi-instance ++ - deleted unused files (logmsg) ++ - pre beta level version ++ ++ Modified files: ++ M drivers/media/video/samsung/mfc40/Makefile ++ M drivers/media/video/samsung/mfc40/command_control_fw.c ++ M drivers/media/video/samsung/mfc40/h263_dec_fw.c ++ M drivers/media/video/samsung/mfc40/h264_dec_fw.c ++ M drivers/media/video/samsung/mfc40/h264_enc_fw.c ++ M drivers/media/video/samsung/mfc40/mp2_dec_fw.c ++ M drivers/media/video/samsung/mfc40/mp4_dec_fw.c ++ M drivers/media/video/samsung/mfc40/mp4_enc_fw.c ++ M drivers/media/video/samsung/mfc40/s3c-mfc.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_buffer_manager.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_common.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_common.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_errorno.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_fw.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_interface.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_memory.h ++ M drivers/media/video/samsung/mfc40/s3c_mfc_opr.c ++ M drivers/media/video/samsung/mfc40/s3c_mfc_opr.h ++ M drivers/media/video/samsung/mfc40/vc1_dec_fw.c ++ ++ Deleted files: ++ D drivers/media/video/samsung/mfc40/s3c_mfc_msg.h ++ D drivers/media/video/samsung/mfc40/s3c_mfc_logmsg.c ++ ++v2.6.28.6-samsung-mfc-r0d1: PyoungJae Jung, Jiun Yu, Satish ++ - update CMM driver for hybrid Divx in 6410 support ++ - change coding style ++ ++ Added files: ++ A drivers/media/video/samsung/cmm/s3c_cmm.c ++ A drivers/media/video/samsung/cmm/s3c_cmm.h ++ ++ Modified files: ++ M drivers/media/video/samsung/cmm/Makefile ++ ++ Deleted files: ++ D drivers/media/video/samsung/cmm/CMMMisc.c ++ D drivers/media/video/samsung/cmm/CMMMisc.h ++ D drivers/media/video/samsung/cmm/LogMsg.c ++ D drivers/media/video/samsung/cmm/LogMsg.h ++ D drivers/media/video/samsung/cmm/s3c-cmm.c ++ D drivers/media/video/samsung/cmm/s3c-cmm.h ++ ++v2.6.28.6-samsung-r3d3-mfc-r0: PyoungJae Jung, Jiun Yu ++ - merge with v2.6.28.6-samsung-r3d3 in master branch ++ - change tag name convention ++ * master branch tag + mfc tag +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/Documentation/spi/spidev_fdx.c linux-2.6.28.6/Documentation/spi/spidev_fdx.c +--- linux-2.6.28/Documentation/spi/spidev_fdx.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/Documentation/spi/spidev_fdx.c 2009-04-30 09:36:37.000000000 +0200 +@@ -14,12 +14,14 @@ + + static int verbose; + ++#define MAX_LEN 4096 ++ + static void do_read(int fd, int len) + { +- unsigned char buf[32], *bp; +- int status; ++ unsigned char buf[MAX_LEN], *bp; ++ int status, i; + +- /* read at least 2 bytes, no more than 32 */ ++ /* read at least 2 bytes, no more than MAX_LEN */ + if (len < 2) + len = 2; + else if (len > sizeof(buf)) +@@ -36,20 +38,22 @@ + return; + } + +- printf("read(%2d, %2d): %02x %02x,", len, status, +- buf[0], buf[1]); +- status -= 2; +- bp = buf + 2; +- while (status-- > 0) +- printf(" %02x", *bp++); ++ printf("\nread(%2d, %2d):", len, status); ++ bp = buf; ++ for(i=0; i), the IPAQ 1940 or + the Samsung SMDK2410 development board (and derivatives). + ++config ARCH_S3C64XX ++ bool "Samsung S3C64XX" ++ select GENERIC_GPIO ++ select HAVE_CLK ++ help ++ Samsung S3C64XX series based systems ++ ++config ARCH_S5P64XX ++ bool "Samsung S5P64XX" ++ select GENERIC_GPIO ++ select HAVE_CLK ++ help ++ Samsung S5P64XX series based systems ++ ++config ARCH_S5PC1XX ++ bool "Samsung S5PC1XX" ++ select GENERIC_GPIO ++ select HAVE_CLK ++ help ++ Samsung S5PC1XX series based systems ++ + config ARCH_SHARK + bool "Shark" + select ISA +@@ -590,6 +611,9 @@ + source "arch/arm/mach-kirkwood/Kconfig" + + source "arch/arm/plat-s3c24xx/Kconfig" ++source "arch/arm/plat-s3c64xx/Kconfig" ++source "arch/arm/plat-s5pc1xx/Kconfig" ++source "arch/arm/plat-s5p64xx/Kconfig" + source "arch/arm/plat-s3c/Kconfig" + + if ARCH_S3C2410 +@@ -601,6 +625,19 @@ + source "arch/arm/mach-s3c2443/Kconfig" + endif + ++if ARCH_S3C64XX ++source "arch/arm/mach-s3c6400/Kconfig" ++source "arch/arm/mach-s3c6410/Kconfig" ++endif ++ ++if ARCH_S5PC1XX ++source "arch/arm/mach-s5pc100/Kconfig" ++endif ++ ++if ARCH_S5P64XX ++source "arch/arm/mach-s5p6440/Kconfig" ++endif ++ + source "arch/arm/mach-lh7a40x/Kconfig" + + source "arch/arm/mach-imx/Kconfig" +@@ -805,7 +842,7 @@ + config HZ + int + default 128 if ARCH_L7200 +- default 200 if ARCH_EBSA110 || ARCH_S3C2410 ++ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5P64XX || ARCH_S5PC1XX + default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER + default AT91_TIMER_HZ if ARCH_AT91 + default 100 +@@ -876,7 +913,8 @@ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ + ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ + ARCH_AT91 || ARCH_DAVINCI || \ +- ARCH_KS8695 || MACH_RD88F5182 ++ ARCH_KS8695 || MACH_RD88F5182 || \ ++ MACH_SMDKC100 + help + If you say Y here, the LEDs on your machine will be used + to provide useful information about your current system status. +@@ -891,7 +929,8 @@ + config LEDS_TIMER + bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ + OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ +- || MACH_OMAP_PERSEUS2 ++ || MACH_OMAP_PERSEUS2 || \ ++ MACH_SMDKC100 + depends on LEDS + depends on !GENERIC_CLOCKEVENTS + default y if ARCH_EBSA110 +@@ -910,7 +949,7 @@ + bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ + !ARCH_OMAP) \ + || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ +- || MACH_OMAP_PERSEUS2 ++ || MACH_OMAP_PERSEUS2 || MACH_SMDKC100 + depends on LEDS + help + If you say Y here, the red LED will be used to give a good real +@@ -1037,7 +1076,7 @@ + + menu "CPU Power Management" + +-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) ++if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA || CPU_S3C6410 || CPU_S5PC100 || CPU_S5P6440) + + source "drivers/cpufreq/Kconfig" + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/Makefile linux-2.6.28.6/arch/arm/Makefile +--- linux-2.6.28/arch/arm/Makefile 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -121,7 +121,14 @@ + machine-$(CONFIG_ARCH_OMAP3) := omap2 + plat-$(CONFIG_ARCH_OMAP) := omap + machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 ++ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 + plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c ++ machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 ++ plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c ++ machine-$(CONFIG_ARCH_S5P64XX) := s5p6440 ++ plat-$(CONFIG_PLAT_S5P64XX) := s5p64xx s3c ++ machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100 ++ plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c + machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x + machine-$(CONFIG_ARCH_VERSATILE) := versatile + machine-$(CONFIG_ARCH_IMX) := imx +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/common/vic.c linux-2.6.28.6/arch/arm/common/vic.c +--- linux-2.6.28/arch/arm/common/vic.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/common/vic.c 2009-04-30 09:36:37.000000000 +0200 +@@ -69,12 +69,12 @@ + /* + * Make sure we clear all existing interrupts + */ +- writel(0, base + VIC_VECT_ADDR); ++ writel(0, base + VIC_PL190_VECT_ADDR); + for (i = 0; i < 19; i++) { + unsigned int value; + +- value = readl(base + VIC_VECT_ADDR); +- writel(value, base + VIC_VECT_ADDR); ++ value = readl(base + VIC_PL190_VECT_ADDR); ++ writel(value, base + VIC_PL190_VECT_ADDR); + } + + for (i = 0; i < 16; i++) { +@@ -82,7 +82,7 @@ + writel(VIC_VECT_CNTL_ENABLE | i, reg); + } + +- writel(32, base + VIC_DEF_VECT_ADDR); ++ writel(32, base + VIC_PL190_DEF_VECT_ADDR); + + for (i = 0; i < 32; i++) { + unsigned int irq = irq_start + i; +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/s3c6400_defconfig linux-2.6.28.6/arch/arm/configs/s3c6400_defconfig +--- linux-2.6.28/arch/arm/configs/s3c6400_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/s3c6400_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,845 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc3 ++# Mon Nov 3 10:10:30 2008 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++CONFIG_ARCH_S3C64XX=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S3C64XX=y ++CONFIG_CPU_S3C6400_INIT=y ++CONFIG_CPU_S3C6400_CLOCK=y ++CONFIG_S3C64XX_SETUP_I2C0=y ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_CPU_S3C6410=y ++CONFIG_S3C6410_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6410=y ++CONFIG_SMDK6410_SD_CH0=y ++# CONFIG_SMDK6410_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=100 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++# CONFIG_NET is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=4096 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++# CONFIG_SCSI is not set ++# CONFIG_SCSI_DMA is not set ++# CONFIG_SCSI_NETLINK is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++# CONFIG_FB is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++# CONFIG_USB is not set ++ ++# ++# Enable Host or Gadget support to see Inventra options ++# ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++# CONFIG_USB_GADGET is not set ++CONFIG_MMC=y ++CONFIG_MMC_DEBUG=y ++CONFIG_MMC_UNSAFE_RESUME=y ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++ ++# ++# Voltage and Current regulators ++# ++# CONFIG_REGULATOR is not set ++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set ++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set ++# CONFIG_REGULATOR_BQ24022 is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++# CONFIG_MSDOS_FS is not set ++# CONFIG_VFAT_FS is not set ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_NLS is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdk6410mtd_defconfig linux-2.6.28.6/arch/arm/configs/smdk6410mtd_defconfig +--- linux-2.6.28/arch/arm/configs/smdk6410mtd_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdk6410mtd_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1468 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc8 ++# Fri Jan 30 14:36:44 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++CONFIG_ARCH_S3C64XX=y ++# CONFIG_ARCH_S5P64XX is not set ++# CONFIG_ARCH_S5PC1XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S3C64XX=y ++CONFIG_CPU_S3C6400_INIT=y ++CONFIG_CPU_S3C6400_CLOCK=y ++CONFIG_S3C64XX_SETUP_I2C0=y ++CONFIG_S3C64XX_SETUP_I2C1=y ++# CONFIG_S3C64XX_ADC is not set ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL080=y ++CONFIG_CPU_S3C6410=y ++CONFIG_S3C6410_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6410=y ++CONFIG_SMDK6410_SD_CH0=y ++# CONFIG_SMDK6410_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_S3C=y ++# CONFIG_MTD_NAND_S3C_DEBUG is not set ++CONFIG_MTD_NAND_S3C_HWECC=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_AX88796 is not set ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++CONFIG_SMC911X=y ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set ++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set ++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set ++# CONFIG_B44 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=y ++CONFIG_PPP_SYNC_TTY=y ++# CONFIG_PPP_DEFLATE is not set ++# CONFIG_PPP_BSDCOMP is not set ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=y ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# # ++# # Watchdog Device Drivers ++# # ++# # CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++ ++# # ++# # ISA-based Watchdog Cards ++# # ++# # CONFIG_PCWATCHDOG is not set ++# # CONFIG_MIXCOMWD is not set ++# # CONFIG_WDT is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_USB=y ++# CONFIG_SND_USB_AUDIO is not set ++# CONFIG_SND_USB_CAIAQ is not set ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S3C64XX_SOC=y ++CONFIG_SND_S3C6410_SOC_I2S=y ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM9713 is not set ++CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8580=y ++CONFIG_SOUND_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8990 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++# CONFIG_USB_GADGET is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++# CONFIG_NFS_FS is not set ++# CONFIG_NFSD is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_MANAGER2 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdk6410nfs_defconfig linux-2.6.28.6/arch/arm/configs/smdk6410nfs_defconfig +--- linux-2.6.28/arch/arm/configs/smdk6410nfs_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdk6410nfs_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1395 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc4 ++# Tue Nov 25 12:51:23 2008 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++CONFIG_ARCH_S3C64XX=y ++# CONFIG_ARCH_S5PC1XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S3C64XX=y ++CONFIG_CPU_S3C6400_INIT=y ++CONFIG_CPU_S3C6400_CLOCK=y ++CONFIG_S3C64XX_SETUP_I2C0=y ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_CPU_S3C6410=y ++CONFIG_S3C6410_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6410=y ++CONFIG_SMDK6410_SD_CH0=y ++# CONFIG_SMDK6410_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/nfs rw nfsroot=12.23.106.52:/opt/small_root_eabi ip=192.168.0.20:12.23.106.52:192.168.0.1:255.255.255.0:test::off init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_AX88796 is not set ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++CONFIG_SMC911X=y ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set ++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set ++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set ++# CONFIG_B44 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_S3C=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_S3C_ADC is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# # ++# # Watchdog Device Drivers ++# # ++# # CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++ ++# # ++# # ISA-based Watchdog Cards ++# # ++# # CONFIG_PCWATCHDOG is not set ++# # CONFIG_MIXCOMWD is not set ++# # CONFIG_WDT is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S3C64XX_SOC=y ++CONFIG_SND_S3C6410_SOC_I2S=y ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM9713 is not set ++CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8580=y ++CONFIG_SOUND_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8990 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++# CONFIG_USB_GADGET is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_S3C_OTGD is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_ZERO is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++# CONFIG_NFS_V4 is not set ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_ACL_SUPPORT=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_BSD_DISKLABEL=y ++# CONFIG_MINIX_SUBPARTITION is not set ++CONFIG_SOLARIS_X86_PARTITION=y ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdk6410onenand_defconfig linux-2.6.28.6/arch/arm/configs/smdk6410onenand_defconfig +--- linux-2.6.28/arch/arm/configs/smdk6410onenand_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdk6410onenand_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1267 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc8 ++# Thu Jan 15 18:17:50 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++CONFIG_ARCH_S3C64XX=y ++# CONFIG_ARCH_S5P64XX is not set ++# CONFIG_ARCH_S5PC1XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S3C64XX=y ++CONFIG_CPU_S3C6400_INIT=y ++CONFIG_CPU_S3C6400_CLOCK=y ++CONFIG_S3C64XX_SETUP_I2C0=y ++CONFIG_S3C64XX_SETUP_I2C1=y ++# CONFIG_S3C64XX_ADC is not set ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL080=y ++CONFIG_CPU_S3C6410=y ++CONFIG_S3C6410_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6410=y ++CONFIG_SMDK6410_SD_CH0=y ++# CONFIG_SMDK6410_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=jffs2 init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++# CONFIG_VFP is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++# CONFIG_NET is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++# CONFIG_MTD_NAND is not set ++CONFIG_MTD_ONENAND=y ++CONFIG_MTD_ONENAND_VERIFY_WRITE=y ++CONFIG_MTD_ONENAND_GENERIC=y ++# CONFIG_MTD_ONENAND_OTP is not set ++# CONFIG_MTD_ONENAND_2X_PROGRAM is not set ++# CONFIG_MTD_ONENAND_SIM is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# # ++# # Watchdog Device Drivers ++# # ++# # CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++ ++# # ++# # ISA-based Watchdog Cards ++# # ++# # CONFIG_PCWATCHDOG is not set ++# # CONFIG_MIXCOMWD is not set ++# # CONFIG_WDT is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S3C64XX_SOC=y ++CONFIG_SND_S3C6410_SOC_I2S=y ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM9713 is not set ++CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8580=y ++CONFIG_SOUND_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8990 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++# CONFIG_USB_GADGET is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_S3C_OTGD is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_ZERO is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++CONFIG_JFFS2_COMPRESSION_OPTIONS=y ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_LZO=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_JFFS2_CMODE_NONE is not set ++CONFIG_JFFS2_CMODE_PRIORITY=y ++# CONFIG_JFFS2_CMODE_SIZE is not set ++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_LZO_COMPRESS=y ++CONFIG_LZO_DECOMPRESS=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdk6410ramdisk_defconfig linux-2.6.28.6/arch/arm/configs/smdk6410ramdisk_defconfig +--- linux-2.6.28/arch/arm/configs/smdk6410ramdisk_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdk6410ramdisk_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1124 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc4 ++# Tue Nov 25 12:52:51 2008 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++CONFIG_ARCH_S3C64XX=y ++# CONFIG_ARCH_S5PC1XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S3C64XX=y ++CONFIG_CPU_S3C6400_INIT=y ++CONFIG_CPU_S3C6400_CLOCK=y ++CONFIG_S3C64XX_SETUP_I2C0=y ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_CPU_S3C6410=y ++CONFIG_S3C6410_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6410=y ++CONFIG_SMDK6410_SD_CH0=y ++# CONFIG_SMDK6410_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x50800000,8M console=ttySAC0,115200 init=/linuxrc mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++# CONFIG_NET is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_S3C=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_S3C_ADC is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# # ++# # Watchdog Device Drivers ++# # ++# # CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++ ++# # ++# # ISA-based Watchdog Cards ++# # ++# # CONFIG_PCWATCHDOG is not set ++# # CONFIG_MIXCOMWD is not set ++# # CONFIG_WDT is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++# CONFIG_USB_GADGET is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_S3C_OTGD is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_ZERO is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdk6410rf_defconfig linux-2.6.28.6/arch/arm/configs/smdk6410rf_defconfig +--- linux-2.6.28/arch/arm/configs/smdk6410rf_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdk6410rf_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1040 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc8 ++# Mon Feb 2 12:53:27 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++CONFIG_ARCH_S3C64XX=y ++# CONFIG_ARCH_S5P64XX is not set ++# CONFIG_ARCH_S5PC1XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S3C64XX=y ++CONFIG_CPU_S3C6400_INIT=y ++CONFIG_CPU_S3C6400_CLOCK=y ++CONFIG_S3C64XX_SETUP_I2C0=y ++CONFIG_S3C64XX_SETUP_I2C1=y ++# CONFIG_S3C64XX_ADC is not set ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL080=y ++CONFIG_CPU_S3C6410=y ++CONFIG_S3C6410_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6410=y ++CONFIG_SMDK6410_SD_CH0=y ++# CONFIG_SMDK6410_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++# CONFIG_VFP is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++# CONFIG_NET is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_S3C=y ++# CONFIG_MTD_NAND_S3C_DEBUG is not set ++CONFIG_MTD_NAND_S3C_HWECC=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++# CONFIG_SCSI is not set ++# CONFIG_SCSI_DMA is not set ++# CONFIG_SCSI_NETLINK is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_ADS7846 is not set ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADCXX is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM70 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1111 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++# CONFIG_FB is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SPI=y ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S3C64XX_SOC=y ++CONFIG_SND_S3C6410_SOC_I2S_V32=y ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM9713 is not set ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8580 is not set ++# CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8990 is not set ++CONFIG_SND_S3C64XX_SOC_SMDK6410_S5M8751=y ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_S5M8751=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++# CONFIG_USB is not set ++ ++# ++# Enable Host or Gadget support to see Inventra options ++# ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++# CONFIG_USB_GADGET is not set ++CONFIG_MMC=y ++CONFIG_MMC_DEBUG=y ++CONFIG_MMC_UNSAFE_RESUME=y ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++# CONFIG_MSDOS_FS is not set ++# CONFIG_VFAT_FS is not set ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdk6440ramdisk_defconfig linux-2.6.28.6/arch/arm/configs/smdk6440ramdisk_defconfig +--- linux-2.6.28/arch/arm/configs/smdk6440ramdisk_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdk6440ramdisk_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1285 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28.6 ++# Sat Apr 4 19:51:52 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++CONFIG_ARCH_S5P64XX=y ++# CONFIG_ARCH_S5PC1XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_PLAT_S5P64XX=y ++CONFIG_CPU_S5P6440_INIT=y ++CONFIG_CPU_S5P6440_CLOCK=y ++CONFIG_S5P64XX_SETUP_I2C0=y ++CONFIG_S5P64XX_SETUP_I2C1=y ++CONFIG_PLAT_S3C=y ++# CONFIG_HAVE_PWM is not set ++# ++# Boot options ++# ++CONFIG_S3C_BOOT_ERROR_RESET=y ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=1 ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S3C24XX=y ++CONFIG_S3C_GPIO_CFG_S3C64XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL330=y ++CONFIG_CPU_S5P6440=y ++CONFIG_S5P6440_SETUP_SDHCI=y ++CONFIG_MACH_SMDK6440=y ++CONFIG_SMDK6440_SD_CH0=y ++# CONFIG_SMDK6440_SD_CH1 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_V6=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_32v6=y ++CONFIG_CPU_ABRT_EV6=y ++CONFIG_CPU_PABRT_NOIFAR=y ++CONFIG_CPU_CACHE_V6=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V6=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++# CONFIG_MII is not set ++# CONFIG_AX88796 is not set ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++# CONFIG_SMC911X is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set ++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set ++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set ++# CONFIG_B44 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=y ++CONFIG_PPP_SYNC_TTY=y ++# CONFIG_PPP_DEFLATE is not set ++# CONFIG_PPP_BSDCOMP is not set ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=y ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S3C6400=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_28 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++CONFIG_FB_S3C_VIRTUAL_SCREEN=y ++CONFIG_FB_S3C_DOUBLE_BUFFERING=y ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++CONFIG_BACKLIGHT_PWM=y ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S5P64XX_SOC=y ++CONFIG_SND_S5P6440_SOC_I2S=y ++CONFIG_SND_S5P64XX_SOC_SMDK6440_WM8580=y ++CONFIG_SOUND_SMDK6440_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_SMDK6440_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++# CONFIG_USB is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++CONFIG_USB_GADGET_S3C_OTGD=y ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++ ++# ++# NOTE: S3C OTG device role enables the controller driver below ++# ++CONFIG_USB_S3C_OTGD=y ++CONFIG_USB_GADGET_S3C_OTGD_DMA_MODE=y ++# CONFIG_USB_GADGET_S3C_OTGD_SLAVE_MODE is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_RNDIS=y ++# CONFIG_USB_GADGETFS is not set ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++CONFIG_MMC_DEBUG=y ++CONFIG_MMC_UNSAFE_RESUME=y ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_ROOT_NFS is not set ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++CONFIG_DEBUG_S3C_PORT=y ++CONFIG_DEBUG_S3C_UART=1 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_MANAGER2 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdkc100_defconfig linux-2.6.28.6/arch/arm/configs/smdkc100_defconfig +--- linux-2.6.28/arch/arm/configs/smdkc100_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdkc100_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,947 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-rc7 ++# Thu Dec 11 15:31:22 2008 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++CONFIG_ARCH_S5PC1XX=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S5PC1XX=y ++CONFIG_CPU_S5PC100_INIT=y ++CONFIG_CPU_S5PC100_CLOCK=y ++CONFIG_S5PC1XX_SETUP_I2C0=y ++CONFIG_S5PC1XX_SETUP_I2C1=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++# CONFIG_S3C_BOOT_ERROR_RESET is not set ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S5PC1XX=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL330=y ++CONFIG_CPU_S5PC100=y ++CONFIG_MACH_SMDKC100=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC0,115200 init=/linuxrc mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++# CONFIG_NET is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++# CONFIG_SCSI is not set ++# CONFIG_SCSI_DMA is not set ++# CONFIG_SCSI_NETLINK is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S5PC100=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++CONFIG_AT24=y ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++CONFIG_FB_S3C_VIRTUAL_SCREEN=y ++CONFIG_FB_S3C_DOUBLE_BUFFERING=y ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++# CONFIG_USB is not set ++ ++# ++# Enable Host or Gadget support to see Inventra options ++# ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++# CONFIG_USB_GADGET is not set ++CONFIG_MMC=y ++CONFIG_MMC_DEBUG=y ++CONFIG_MMC_UNSAFE_RESUME=y ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++# CONFIG_MSDOS_FS is not set ++# CONFIG_VFAT_FS is not set ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++# CONFIG_DEBUG_S3C_PORT is not set ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdkc100mtd_defconfig linux-2.6.28.6/arch/arm/configs/smdkc100mtd_defconfig +--- linux-2.6.28/arch/arm/configs/smdkc100mtd_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdkc100mtd_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1608 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28.6 ++# Tue Mar 31 14:00:16 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_S5P64XX is not set ++CONFIG_ARCH_S5PC1XX=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S5PC1XX=y ++CONFIG_CPU_S5PC100_INIT=y ++CONFIG_CPU_S5PC100_CLOCK=y ++CONFIG_S5PC1XX_SETUP_I2C0=y ++CONFIG_S5PC1XX_SETUP_I2C1=y ++CONFIG_S5PC1XX_ADC=y ++CONFIG_S5PC1XX_PWM=y ++CONFIG_S5PC1XX_DEV_FIMC0=y ++CONFIG_S5PC1XX_DEV_FIMC1=y ++CONFIG_S5PC1XX_DEV_FIMC2=y ++CONFIG_S5PC1XX_SETUP_FIMC0=y ++CONFIG_S5PC1XX_SETUP_FIMC1=y ++CONFIG_S5PC1XX_SETUP_FIMC2=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++# CONFIG_S3C_BOOT_ERROR_RESET is not set ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S5PC1XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL330=y ++CONFIG_CPU_S5PC100=y ++CONFIG_S5PC1XX_SETUP_SDHCI=y ++CONFIG_MACH_SMDKC100=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++CONFIG_DMABOUNCE=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++CONFIG_MTD_REDBOOT_PARTS=y ++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 ++CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y ++# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_S3C=y ++# CONFIG_MTD_NAND_S3C_DEBUG is not set ++CONFIG_MTD_NAND_S3C_HWECC=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_NET_ETHERNET is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=y ++CONFIG_PPP_SYNC_TTY=y ++# CONFIG_PPP_DEFLATE is not set ++# CONFIG_PPP_BSDCOMP is not set ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=y ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_ADS7846 is not set ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S5PC100=y ++# CONFIG_SERIAL_S5PC1XX_HSUART is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++# CONFIG_I2C_HELPER_AUTO is not set ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_AT24 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_HS_SPI_S5PC100=y ++CONFIG_HSPICLK_PCLK=y ++# CONFIG_HSPICLK_SCLK_48M is not set ++# CONFIG_WORD_TRANSIZE is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADCXX is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM70 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1111 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_28 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SPI=y ++CONFIG_SND_USB=y ++# CONFIG_SND_USB_AUDIO is not set ++# CONFIG_SND_USB_CAIAQ is not set ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S5PC1XX_SOC=y ++CONFIG_SND_SOC_I2S_V50=y ++CONFIG_SND_SMDKC100_WM8580=y ++CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_SMDKC100_WM9713 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_S3C_OTG_HOST is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++CONFIG_USB_ACM=y ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++# CONFIG_USB_GADGET is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_S3C_OTGD is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_GADGET_S3C_OTGD_DMA_MODE is not set ++# CONFIG_USB_GADGET_S3C_OTGD_SLAVE_MODE is not set ++# CONFIG_USB_ZERO is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MMC_SDHCI_SCATTERGATHER is not set ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_S3C=y ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_YAFFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++# CONFIG_NFS_V4 is not set ++# CONFIG_ROOT_NFS is not set ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_ACL_SUPPORT=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_BSD_DISKLABEL=y ++# CONFIG_MINIX_SUBPARTITION is not set ++CONFIG_SOLARIS_X86_PARTITION=y ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++# CONFIG_DEBUG_S3C_PORT is not set ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_MANAGER2 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdkc100nfs_defconfig linux-2.6.28.6/arch/arm/configs/smdkc100nfs_defconfig +--- linux-2.6.28/arch/arm/configs/smdkc100nfs_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdkc100nfs_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1657 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28.6 ++# Sat Mar 21 18:43:29 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_S5P64XX is not set ++CONFIG_ARCH_S5PC1XX=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S5PC1XX=y ++CONFIG_CPU_S5PC100_INIT=y ++CONFIG_CPU_S5PC100_CLOCK=y ++CONFIG_S5PC1XX_SETUP_I2C0=y ++CONFIG_S5PC1XX_SETUP_I2C1=y ++CONFIG_S5PC1XX_ADC=y ++CONFIG_S5PC1XX_PWM=y ++CONFIG_S5PC1XX_DEV_FIMC0=y ++CONFIG_S5PC1XX_DEV_FIMC1=y ++CONFIG_S5PC1XX_DEV_FIMC2=y ++CONFIG_S5PC1XX_SETUP_FIMC0=y ++CONFIG_S5PC1XX_SETUP_FIMC1=y ++CONFIG_S5PC1XX_SETUP_FIMC2=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++# CONFIG_S3C_BOOT_WATCHDOG is not set ++# CONFIG_S3C_BOOT_ERROR_RESET is not set ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S5PC1XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL330=y ++CONFIG_CPU_S5PC100=y ++CONFIG_S5PC1XX_SETUP_SDHCI=y ++CONFIG_MACH_SMDKC100=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++CONFIG_DMABOUNCE=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/nfs rw nfsroot=12.23.106.52:/opt/small_root_eabi ip=192.168.0.20:12.23.106.52:192.168.0.1:255.255.255.0:test::off init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++CONFIG_MTD_REDBOOT_PARTS=y ++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 ++CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y ++# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_S3C=y ++# CONFIG_MTD_NAND_S3C_DEBUG is not set ++CONFIG_MTD_NAND_S3C_HWECC=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_AX88796 is not set ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++# CONFIG_ENC28J60 is not set ++CONFIG_SMC911X=y ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set ++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set ++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set ++# CONFIG_B44 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=y ++CONFIG_PPP_SYNC_TTY=y ++# CONFIG_PPP_DEFLATE is not set ++# CONFIG_PPP_BSDCOMP is not set ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=y ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_ADS7846 is not set ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S5PC100=y ++# CONFIG_SERIAL_S5PC1XX_HSUART is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++# CONFIG_I2C_HELPER_AUTO is not set ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_AT24 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_HS_SPI_S5PC100=y ++CONFIG_HSPICLK_PCLK=y ++# CONFIG_HSPICLK_SCLK_48M is not set ++# CONFIG_WORD_TRANSIZE is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADCXX is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM70 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1111 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SPI=y ++CONFIG_SND_USB=y ++# CONFIG_SND_USB_AUDIO is not set ++# CONFIG_SND_USB_CAIAQ is not set ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S5PC1XX_SOC=y ++CONFIG_SND_SOC_I2S_V50=y ++CONFIG_SND_SMDKC100_WM8580=y ++CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_SMDKC100_WM9713 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++CONFIG_USB_GADGET_S3C_OTGD=y ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++ ++# ++# NOTE: S3C OTG device role enables the controller driver below ++# ++CONFIG_USB_S3C_OTGD=y ++CONFIG_USB_GADGET_S3C_OTGD_DMA_MODE=y ++# CONFIG_USB_GADGET_S3C_OTGD_SLAVE_MODE is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=m ++# CONFIG_USB_ETH_RNDIS is not set ++# CONFIG_USB_GADGETFS is not set ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MMC_SDHCI_SCATTERGATHER is not set ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_S3C=y ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_YAFFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++# CONFIG_NFS_V4 is not set ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_ACL_SUPPORT=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_BSD_DISKLABEL=y ++# CONFIG_MINIX_SUBPARTITION is not set ++CONFIG_SOLARIS_X86_PARTITION=y ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++# CONFIG_DEBUG_S3C_PORT is not set ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_MANAGER2 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdkc100onenand_defconfig linux-2.6.28.6/arch/arm/configs/smdkc100onenand_defconfig +--- linux-2.6.28/arch/arm/configs/smdkc100onenand_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdkc100onenand_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1625 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28.6 ++# Tue Mar 31 13:05:11 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_S5P64XX is not set ++CONFIG_ARCH_S5PC1XX=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S5PC1XX=y ++CONFIG_CPU_S5PC100_INIT=y ++CONFIG_CPU_S5PC100_CLOCK=y ++CONFIG_S5PC1XX_SETUP_I2C0=y ++CONFIG_S5PC1XX_SETUP_I2C1=y ++CONFIG_S5PC1XX_ADC=y ++CONFIG_S5PC1XX_PWM=y ++CONFIG_S5PC1XX_DEV_FIMC0=y ++CONFIG_S5PC1XX_DEV_FIMC1=y ++CONFIG_S5PC1XX_DEV_FIMC2=y ++CONFIG_S5PC1XX_SETUP_FIMC0=y ++CONFIG_S5PC1XX_SETUP_FIMC1=y ++CONFIG_S5PC1XX_SETUP_FIMC2=y ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++# CONFIG_S3C_BOOT_WATCHDOG is not set ++# CONFIG_S3C_BOOT_ERROR_RESET is not set ++ ++# ++# Power management ++# ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S5PC1XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL330=y ++CONFIG_CPU_S5PC100=y ++CONFIG_S5PC1XX_SETUP_SDHCI=y ++CONFIG_MACH_SMDKC100=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++CONFIG_DMABOUNCE=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++CONFIG_MTD_REDBOOT_PARTS=y ++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 ++CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y ++# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++# CONFIG_MTD_NAND is not set ++CONFIG_MTD_ONENAND=y ++CONFIG_MTD_ONENAND_VERIFY_WRITE=y ++CONFIG_MTD_ONENAND_GENERIC=y ++# CONFIG_MTD_ONENAND_OTP is not set ++# CONFIG_MTD_ONENAND_2X_PROGRAM is not set ++# CONFIG_MTD_ONENAND_SIM is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_NET_ETHERNET is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=y ++CONFIG_PPP_SYNC_TTY=y ++# CONFIG_PPP_DEFLATE is not set ++# CONFIG_PPP_BSDCOMP is not set ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=y ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++CONFIG_KEYPAD_S3C=y ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_ADS7846 is not set ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S5PC100=y ++# CONFIG_SERIAL_S5PC1XX_HSUART is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++# CONFIG_I2C_HELPER_AUTO is not set ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_AT24 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_HS_SPI_S5PC100=y ++CONFIG_HSPICLK_PCLK=y ++# CONFIG_HSPICLK_SCLK_48M is not set ++# CONFIG_WORD_TRANSIZE is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADCXX is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM70 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1111 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_28 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SPI=y ++CONFIG_SND_USB=y ++# CONFIG_SND_USB_AUDIO is not set ++# CONFIG_SND_USB_CAIAQ is not set ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S5PC1XX_SOC=y ++CONFIG_SND_SOC_I2S_V50=y ++CONFIG_SND_SMDKC100_WM8580=y ++CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_SMDKC100_WM9713 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++# CONFIG_USB_MON is not set ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++# CONFIG_USB_S3C_OTG_HOST is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++# CONFIG_USB_GADGET is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_S3C_OTGD is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_GADGET_S3C_OTGD_DMA_MODE is not set ++# CONFIG_USB_GADGET_S3C_OTGD_SLAVE_MODE is not set ++# CONFIG_USB_ZERO is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MMC_SDHCI_SCATTERGATHER is not set ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_S3C=y ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_YAFFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++# CONFIG_NFS_V4 is not set ++# CONFIG_ROOT_NFS is not set ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_ACL_SUPPORT=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_BSD_DISKLABEL=y ++# CONFIG_MINIX_SUBPARTITION is not set ++CONFIG_SOLARIS_X86_PARTITION=y ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++# CONFIG_DEBUG_S3C_PORT is not set ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_MANAGER2 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/configs/smdkc100pm_defconfig linux-2.6.28.6/arch/arm/configs/smdkc100pm_defconfig +--- linux-2.6.28/arch/arm/configs/smdkc100pm_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/configs/smdkc100pm_defconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1560 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28.6 ++# Tue Apr 28 11:19:27 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++# CONFIG_SYSVIPC is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++# CONFIG_GROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++CONFIG_KALLSYMS_ALL=y ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++CONFIG_LSF=y ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++CONFIG_FREEZER=y ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_S5P64XX is not set ++CONFIG_ARCH_S5PC1XX=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_MSM is not set ++CONFIG_S3C64XX_SETUP_I2C1=y ++CONFIG_PLAT_S5PC1XX=y ++CONFIG_CPU_S5PC100_INIT=y ++CONFIG_CPU_S5PC100_CLOCK=y ++CONFIG_S5PC1XX_SETUP_I2C0=y ++CONFIG_S5PC1XX_SETUP_I2C1=y ++CONFIG_S5PC1XX_ADC=y ++CONFIG_S5PC1XX_DEV_FIMC0=y ++CONFIG_S5PC1XX_DEV_FIMC1=y ++CONFIG_S5PC1XX_DEV_FIMC2=y ++CONFIG_S5PC1XX_SETUP_FIMC0=y ++CONFIG_S5PC1XX_SETUP_FIMC1=y ++CONFIG_S5PC1XX_SETUP_FIMC2=y ++CONFIG_S5PC1XX_DEV_CSIS=y ++CONFIG_S5PC1XX_SETUP_CSIS=y ++CONFIG_S5PC1XX_PWM=y ++# CONFIG_TIMER_PWM is not set ++# CONFIG_NO_PWM is not set ++CONFIG_PLAT_S3C=y ++ ++# ++# Boot options ++# ++# CONFIG_S3C_BOOT_WATCHDOG is not set ++# CONFIG_S3C_BOOT_ERROR_RESET is not set ++ ++# ++# Power management ++# ++# CONFIG_S3C2410_PM_DEBUG is not set ++# CONFIG_S3C2410_PM_CHECK is not set ++CONFIG_S3C_LOWLEVEL_UART_PORT=0 ++CONFIG_SPLIT_ROOT_FILESYSTEM=y ++CONFIG_S3C_GPIO_SPACE=0 ++CONFIG_S3C_GPIO_TRACK=y ++CONFIG_S3C_GPIO_PULL_UPDOWN=y ++CONFIG_S3C_GPIO_CFG_S5PC1XX=y ++CONFIG_S3C_DEV_HSMMC=y ++CONFIG_S3C_DEV_HSMMC1=y ++CONFIG_S3C_DEV_I2C1=y ++CONFIG_S3C_DMA_PL330=y ++CONFIG_CPU_S5PC100=y ++CONFIG_S5PC1XX_SETUP_SDHCI=y ++CONFIG_MACH_SMDKC100=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++CONFIG_ARM_VIC=y ++CONFIG_DMABOUNCE=y ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0 ++CONFIG_ZBOOT_ROM_BSS=0 ++CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC0,115200 mem=128M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++# CONFIG_FPE_NWFPE is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y ++CONFIG_APM_EMULATION=y ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_PACKET is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++# CONFIG_WIRELESS is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++CONFIG_MTD_REDBOOT_PARTS=y ++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 ++CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y ++# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_S3C=y ++# CONFIG_MTD_NAND_S3C_DEBUG is not set ++CONFIG_MTD_NAND_S3C_HWECC=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++CONFIG_MTD_ONENAND=y ++# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set ++CONFIG_MTD_ONENAND_GENERIC=y ++# CONFIG_MTD_ONENAND_OTP is not set ++# CONFIG_MTD_ONENAND_2X_PROGRAM is not set ++# CONFIG_MTD_ONENAND_SIM is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_NET_ETHERNET is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++# CONFIG_WAN is not set ++CONFIG_PPP=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=y ++CONFIG_PPP_SYNC_TTY=y ++# CONFIG_PPP_DEFLATE is not set ++# CONFIG_PPP_BSDCOMP is not set ++# CONFIG_PPP_MPPE is not set ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=y ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYPAD_S3C is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_LIFEBOOK=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_ADS7846 is not set ++CONFIG_TOUCHSCREEN_S3C=y ++CONFIG_TOUCHSCREEN_NEW=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_CONSOLE is not set ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_SAMSUNG=y ++CONFIG_SERIAL_SAMSUNG_UARTS=4 ++# CONFIG_SERIAL_SAMSUNG_DEBUG is not set ++CONFIG_SERIAL_SAMSUNG_CONSOLE=y ++CONFIG_SERIAL_S5PC100=y ++# CONFIG_SERIAL_S5PC1XX_HSUART is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_S3C_MEM=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++# CONFIG_I2C_HELPER_AUTO is not set ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_AT24 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_HS_SPI_S5PC100=y ++CONFIG_HSPICLK_PCLK=y ++# CONFIG_HSPICLK_SCLK_48M is not set ++# CONFIG_WORD_TRANSIZE is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADCXX is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM70 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_MAX1111 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=y ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++CONFIG_VIDEO_DEV=y ++CONFIG_VIDEO_V4L2_COMMON=y ++CONFIG_VIDEO_ALLOW_V4L1=y ++CONFIG_VIDEO_V4L1_COMPAT=y ++# CONFIG_DVB_CORE is not set ++CONFIG_VIDEO_MEDIA=y ++ ++# ++# Multimedia drivers ++# ++# CONFIG_MEDIA_ATTACH is not set ++CONFIG_MEDIA_TUNER=y ++# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set ++CONFIG_MEDIA_TUNER_SIMPLE=y ++CONFIG_MEDIA_TUNER_TDA8290=y ++CONFIG_MEDIA_TUNER_TDA9887=y ++CONFIG_MEDIA_TUNER_TEA5761=y ++CONFIG_MEDIA_TUNER_TEA5767=y ++CONFIG_MEDIA_TUNER_MT20XX=y ++CONFIG_MEDIA_TUNER_XC2028=y ++CONFIG_MEDIA_TUNER_XC5000=y ++CONFIG_VIDEO_V4L2=y ++CONFIG_VIDEO_V4L1=y ++CONFIG_VIDEO_CAPTURE_DRIVERS=y ++# CONFIG_VIDEO_ADV_DEBUG is not set ++CONFIG_VIDEO_FIXED_MINOR_RANGES=y ++CONFIG_VIDEO_HELPER_CHIPS_AUTO=y ++# CONFIG_VIDEO_VIVI is not set ++# CONFIG_VIDEO_CPIA is not set ++# CONFIG_VIDEO_SAA5246A is not set ++# CONFIG_VIDEO_SAA5249 is not set ++# CONFIG_SOC_CAMERA is not set ++CONFIG_VIDEO_SAMSUNG=y ++ ++# ++# FIMC configurations ++# ++CONFIG_VIDEO_FIMC=y ++# CONFIG_VIDEO_FIMC_DEBUG is not set ++# CONFIG_VIDEO_FIMC_MIPI is not set ++CONFIG_S5K4BA=y ++# CONFIG_S5K3BA is not set ++CONFIG_VIDEO_FIMC_CAM_CH=0 ++CONFIG_VIDEO_FIMC_CAM_RESET=0 ++CONFIG_VIDEO_MFC40=y ++CONFIG_VIDEO_JPEG_V2=y ++CONFIG_VIDEO_ROTATOR=y ++CONFIG_VIDEO_G2D=y ++CONFIG_VIDEO_G3D=y ++ ++# ++# Reserved memory configurations ++# ++CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC=10240 ++CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC=32768 ++CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG=32768 ++CONFIG_VIDEO_MFC_MAX_INSTANCE=1 ++# CONFIG_RADIO_ADAPTERS is not set ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S3C=y ++CONFIG_FB_S3C_LTE480WV=y ++# CONFIG_FB_S3C_LTV350QV is not set ++# CONFIG_FB_S3C_LTS222QV is not set ++CONFIG_FB_S3C_BPP=y ++# CONFIG_FB_S3C_BPP_8 is not set ++CONFIG_FB_S3C_BPP_16=y ++# CONFIG_FB_S3C_BPP_24 is not set ++# CONFIG_FB_S3C_BPP_28 is not set ++# CONFIG_FB_S3C_BPP_32 is not set ++CONFIG_FB_S3C_NUM=1 ++# CONFIG_FB_S3C_VIRTUAL_SCREEN is not set ++# CONFIG_FB_S3C_DOUBLE_BUFFERING is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++# CONFIG_LOGO_LINUX_CLUT224 is not set ++CONFIG_LOGO_LINUX_LANDSCAPED_CLUT224=y ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SPI=y ++CONFIG_SND_SOC=y ++ ++# ++# SoC Audio for the Samsung S3C ++# ++CONFIG_SND_S5PC1XX_SOC=y ++CONFIG_SND_SOC_I2S_V50=y ++CONFIG_SND_SMDKC100_WM8580=y ++CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_LINE=y ++# CONFIG_SOUND_S5PC100_WM8580_INPUT_STREAM_MIC is not set ++# CONFIG_SND_SMDKC100_WM9713 is not set ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_WM8580=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++# CONFIG_HID_COMPAT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++# CONFIG_USB is not set ++# CONFIG_USB_MUSB_HDRC is not set ++# CONFIG_USB_GADGET_MUSB_HDRC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++CONFIG_USB_GADGET_S3C_OTGD=y ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++ ++# ++# NOTE: S3C OTG device role enables the controller driver below ++# ++CONFIG_USB_S3C_OTGD=y ++CONFIG_USB_GADGET_S3C_OTGD_DMA_MODE=y ++# CONFIG_USB_GADGET_S3C_OTGD_SLAVE_MODE is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_RNDIS=y ++# CONFIG_USB_GADGETFS is not set ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_S3C=y ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_S3C=y ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++CONFIG_GENERIC_ACL=y ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_YAFFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++# CONFIG_NFS_V4 is not set ++# CONFIG_ROOT_NFS is not set ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_ACL_SUPPORT=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_BSD_DISKLABEL=y ++# CONFIG_MINIX_SUBPARTITION is not set ++CONFIG_SOLARIS_X86_PARTITION=y ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++CONFIG_DEBUG_RT_MUTEXES=y ++CONFIG_DEBUG_PI_LIST=y ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++CONFIG_DEBUG_MEMORY_INIT=y ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_SYSCTL_SYSCALL_CHECK=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++# CONFIG_DEBUG_S3C_PORT is not set ++CONFIG_DEBUG_S3C_UART=0 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++# CONFIG_CRYPTO_MANAGER is not set ++# CONFIG_CRYPTO_MANAGER2 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++# CONFIG_CRYPTO_CBC is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/include/asm/hardware/vic.h linux-2.6.28.6/arch/arm/include/asm/hardware/vic.h +--- linux-2.6.28/arch/arm/include/asm/hardware/vic.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/include/asm/hardware/vic.h 2009-04-30 09:36:37.000000000 +0200 +@@ -29,15 +29,17 @@ + #define VIC_INT_SOFT 0x18 + #define VIC_INT_SOFT_CLEAR 0x1c + #define VIC_PROTECT 0x20 +-#define VIC_VECT_ADDR 0x30 +-#define VIC_DEF_VECT_ADDR 0x34 ++#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */ ++#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */ + +-#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */ +-#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */ ++#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */ ++#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */ + #define VIC_ITCR 0x300 /* VIC test control register */ + + #define VIC_VECT_CNTL_ENABLE (1 << 5) + ++#define VIC_PL192_VECT_ADDR 0xF00 ++ + #ifndef __ASSEMBLY__ + void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); + #endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/include/asm/memory.h linux-2.6.28.6/arch/arm/include/asm/memory.h +--- linux-2.6.28/arch/arm/include/asm/memory.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/include/asm/memory.h 2009-10-21 09:48:29.000000000 +0200 +@@ -104,7 +104,7 @@ + * between 2MB and 14MB inclusive. + */ + #ifndef CONSISTENT_DMA_SIZE +-#define CONSISTENT_DMA_SIZE SZ_2M ++#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M)//SZ_2M + #endif + + /* +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/Kconfig linux-2.6.28.6/arch/arm/mach-s3c2410/Kconfig +--- linux-2.6.28/arch/arm/mach-s3c2410/Kconfig 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -32,11 +32,6 @@ + help + GPIO code for S3C2410 and similar processors + +-config S3C2410_CLOCK +- bool +- help +- Clock code for the S3C2410, and similar processors +- + config SIMTEC_NOR + bool + help +@@ -84,6 +79,7 @@ + select PM_SIMTEC if PM + select SIMTEC_NOR + select MACH_BAST_IDE ++ select S3C24XX_DCLK + select ISA + help + Say Y here if you are using the Simtec Electronics EB2410ITX +@@ -121,6 +117,7 @@ + config MACH_VR1000 + bool "Thorcom VR1000" + select PM_SIMTEC if PM ++ select S3C24XX_DCLK + select SIMTEC_NOR + select MACH_BAST_IDE + select CPU_S3C2410 +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/Makefile linux-2.6.28.6/arch/arm/mach-s3c2410/Makefile +--- linux-2.6.28/arch/arm/mach-s3c2410/Makefile 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -15,7 +15,6 @@ + obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o + obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o + obj-$(CONFIG_S3C2410_GPIO) += gpio.o +-obj-$(CONFIG_S3C2410_CLOCK) += clock.o + + # Machine support + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/dma.c linux-2.6.28.6/arch/arm/mach-s3c2410/dma.c +--- linux-2.6.28/arch/arm/mach-s3c2410/dma.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -25,12 +25,12 @@ + + #include + #include +-#include ++#include + #include + #include + #include + #include +-#include ++#include + + static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/bast-irq.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/bast-irq.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/bast-irq.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/bast-irq.h 2009-12-08 07:35:53.000000000 +0100 +@@ -22,7 +22,7 @@ + #define IRQ_PCSERIAL2 IRQ_EINT14 + #define IRQ_PCPARALLEL IRQ_EINT13 + #define IRQ_ASIX IRQ_EINT11 +-#define IRQ_DM9000 IRQ_EINT10 ++#define IRQ_DM9000 IRQ_EINT7//IRQ_EINT10 + #define IRQ_ISA IRQ_EINT9 + #define IRQ_SMALERT IRQ_EINT8 + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio-core.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/gpio-core.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio-core.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/gpio-core.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,34 @@ ++/* arch/arm/mach-s3c24100/include/mach/gpio-core.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C2410 - GPIO core support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_GPIO_CORE_H ++#define __ASM_ARCH_GPIO_CORE_H __FILE__ ++ ++#include ++#include ++ ++extern struct s3c_gpio_chip s3c24xx_gpios[]; ++ ++static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) ++{ ++ struct s3c_gpio_chip *chip; ++ ++ if (pin > S3C2410_GPG10) ++ return NULL; ++ ++ chip = &s3c24xx_gpios[pin/32]; ++ return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; ++} ++ ++#endif /* __ASM_ARCH_GPIO_CORE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/irqs.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/irqs.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/irqs.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/irqs.h 2009-04-30 09:36:37.000000000 +0200 +@@ -134,6 +134,8 @@ + #define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ + #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ + ++#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC ++ + #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) + #define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) + #define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) +@@ -160,6 +162,12 @@ + #define NR_IRQS (IRQ_S3C2440_AC97+1) + #endif + ++/* compatibility define. */ ++#define IRQ_UART3 IRQ_S3C2443_UART3 ++#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3 ++#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 ++#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 ++ + /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ + #define FIQ_START IRQ_EINT0 + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/map.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/map.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/map.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/map.h 2009-04-30 09:36:37.000000000 +0200 +@@ -13,34 +13,20 @@ + #ifndef __ASM_ARCH_MAP_H + #define __ASM_ARCH_MAP_H + ++#include + #include + + #define S3C2410_ADDR(x) S3C_ADDR(x) + +-/* interrupt controller is the first thing we put in, to make +- * the assembly code for the irq detection easier +- */ +-#define S3C24XX_VA_IRQ S3C_VA_IRQ +-#define S3C2410_PA_IRQ (0x4A000000) +-#define S3C24XX_SZ_IRQ SZ_1M +- +-/* memory controller registers */ +-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +-#define S3C2410_PA_MEMCTRL (0x48000000) +-#define S3C24XX_SZ_MEMCTRL SZ_1M +- + /* USB host controller */ + #define S3C2410_PA_USBHOST (0x49000000) +-#define S3C24XX_SZ_USBHOST SZ_1M + + /* DMA controller */ + #define S3C2410_PA_DMA (0x4B000000) + #define S3C24XX_SZ_DMA SZ_1M + + /* Clock and Power management */ +-#define S3C24XX_VA_CLKPWR S3C_VA_SYS + #define S3C2410_PA_CLKPWR (0x4C000000) +-#define S3C24XX_SZ_CLKPWR SZ_1M + + /* LCD controller */ + #define S3C2410_PA_LCD (0x4D000000) +@@ -48,48 +34,12 @@ + + /* NAND flash controller */ + #define S3C2410_PA_NAND (0x4E000000) +-#define S3C24XX_SZ_NAND SZ_1M +- +-/* UARTs */ +-#define S3C24XX_VA_UART S3C_VA_UART +-#define S3C2410_PA_UART (0x50000000) +-#define S3C24XX_SZ_UART SZ_1M +- +-/* Timers */ +-#define S3C24XX_VA_TIMER S3C_VA_TIMER +-#define S3C2410_PA_TIMER (0x51000000) +-#define S3C24XX_SZ_TIMER SZ_1M +- +-/* USB Device port */ +-#define S3C2410_PA_USBDEV (0x52000000) +-#define S3C24XX_SZ_USBDEV SZ_1M +- +-/* Watchdog */ +-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG +-#define S3C2410_PA_WATCHDOG (0x53000000) +-#define S3C24XX_SZ_WATCHDOG SZ_1M + + /* IIC hardware controller */ + #define S3C2410_PA_IIC (0x54000000) +-#define S3C24XX_SZ_IIC SZ_1M + + /* IIS controller */ + #define S3C2410_PA_IIS (0x55000000) +-#define S3C24XX_SZ_IIS SZ_1M +- +-/* GPIO ports */ +- +-/* the calculation for the VA of this must ensure that +- * it is the same distance apart from the UART in the +- * phsyical address space, as the initial mapping for the IO +- * is done as a 1:1 maping. This puts it (currently) at +- * 0xFA800000, which is not in the way of any current mapping +- * by the base system. +-*/ +- +-#define S3C2410_PA_GPIO (0x56000000) +-#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +-#define S3C24XX_SZ_GPIO SZ_1M + + /* RTC */ + #define S3C2410_PA_RTC (0x57000000) +@@ -97,15 +47,12 @@ + + /* ADC */ + #define S3C2410_PA_ADC (0x58000000) +-#define S3C24XX_SZ_ADC SZ_1M + + /* SPI */ + #define S3C2410_PA_SPI (0x59000000) +-#define S3C24XX_SZ_SPI SZ_1M + + /* SDI */ + #define S3C2410_PA_SDI (0x5A000000) +-#define S3C24XX_SZ_SDI SZ_1M + + /* CAMIF */ + #define S3C2440_PA_CAMIF (0x4F000000) +@@ -120,13 +67,6 @@ + #define S3C2443_PA_HSMMC (0x4A800000) + #define S3C2443_SZ_HSMMC (256) + +-/* ISA style IO, for each machine to sort out mappings for, if it +- * implements it. We reserve two 16M regions for ISA. +- */ +- +-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) +- + /* physical addresses of all the chip-select areas */ + + #define S3C2410_CS0 (0x00000000) +@@ -152,27 +92,16 @@ + #define S3C24XX_PA_TIMER S3C2410_PA_TIMER + #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV + #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG +-#define S3C24XX_PA_IIC S3C2410_PA_IIC + #define S3C24XX_PA_IIS S3C2410_PA_IIS + #define S3C24XX_PA_GPIO S3C2410_PA_GPIO + #define S3C24XX_PA_RTC S3C2410_PA_RTC + #define S3C24XX_PA_ADC S3C2410_PA_ADC + #define S3C24XX_PA_SPI S3C2410_PA_SPI ++#define S3C24XX_PA_SDI S3C2410_PA_SDI ++#define S3C24XX_PA_NAND S3C2410_PA_NAND + +-/* deal with the registers that move under the 2412/2413 */ +- +-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +-#ifndef __ASSEMBLY__ +-extern void __iomem *s3c24xx_va_gpio2; +-#endif +-#ifdef CONFIG_CPU_S3C2412_ONLY +-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +-#else +-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +-#endif +-#else +-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +-#endif ++#define S3C_PA_IIC S3C2410_PA_IIC ++#define S3C_PA_UART S3C24XX_PA_UART ++#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC + + #endif /* __ASM_ARCH_MAP_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-clock.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/regs-clock.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-clock.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/regs-clock.h 2009-04-30 09:36:37.000000000 +0200 +@@ -42,13 +42,6 @@ + #define S3C2410_CLKCON_IIS (1<<17) + #define S3C2410_CLKCON_SPI (1<<18) + +-#define S3C2410_PLLCON_MDIVSHIFT 12 +-#define S3C2410_PLLCON_PDIVSHIFT 4 +-#define S3C2410_PLLCON_SDIVSHIFT 0 +-#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) +-#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) +-#define S3C2410_PLLCON_SDIVMASK 3 +- + /* DCLKCON register addresses in gpio.h */ + + #define S3C2410_DCLKCON_DCLK0EN (1<<0) +@@ -76,32 +69,6 @@ + #define S3C2410_CLKSLOW_SLOWVAL(x) (x) + #define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) + +-#ifndef __ASSEMBLY__ +- +-#include +- +-static inline unsigned int +-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) +-{ +- unsigned int mdiv, pdiv, sdiv; +- uint64_t fvco; +- +- mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; +- pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; +- sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; +- +- mdiv &= S3C2410_PLLCON_MDIVMASK; +- pdiv &= S3C2410_PLLCON_PDIVMASK; +- sdiv &= S3C2410_PLLCON_SDIVMASK; +- +- fvco = (uint64_t)baseclk * (mdiv + 8); +- do_div(fvco, (pdiv + 2) << sdiv); +- +- return (unsigned int)fvco; +-} +- +-#endif /* __ASSEMBLY__ */ +- + #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) + + /* extra registers */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-gpio.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-gpio.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/regs-gpio.h 2009-04-30 09:36:37.000000000 +0200 +@@ -1053,13 +1053,6 @@ + #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) + #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) + +-/* values for S3C2410_EXTINT0/1/2 */ +-#define S3C2410_EXTINT_LOWLEV (0x00) +-#define S3C2410_EXTINT_HILEV (0x01) +-#define S3C2410_EXTINT_FALLEDGE (0x02) +-#define S3C2410_EXTINT_RISEEDGE (0x04) +-#define S3C2410_EXTINT_BOTHEDGE (0x06) +- + /* interrupt filtering conrrol for EINT16..EINT23 */ + #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) + #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/spi.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/spi.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/spi.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/spi.h 2009-04-30 09:36:37.000000000 +0200 +@@ -22,5 +22,12 @@ + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); + }; + ++/* Standard setup / suspend routines for SPI GPIO pins. */ ++ ++extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, ++ int enable); ++ ++extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, ++ int enable); + + #endif /* __ASM_ARCH_SPI_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/system-reset.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/system-reset.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/system-reset.h 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/system-reset.h 2009-04-30 09:36:37.000000000 +0200 +@@ -13,7 +13,7 @@ + #include + #include + +-#include ++#include + #include + + #include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/include/mach/tick.h linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/tick.h +--- linux-2.6.28/arch/arm/mach-s3c2410/include/mach/tick.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/include/mach/tick.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,15 @@ ++/* linux/arch/arm/mach-s3c2410/include/mach/tick.h ++ * ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C2410 - timer tick support ++ */ ++ ++#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) ++ ++static inline int s3c24xx_ostimer_pending(void) ++{ ++ return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-amlm5900.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-amlm5900.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-amlm5900.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-amlm5900.c 2009-04-30 09:36:37.000000000 +0200 +@@ -52,6 +52,7 @@ + #include + #include + ++#include + #include + #include + +@@ -150,7 +151,7 @@ + #endif + &s3c_device_adc, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, +@@ -233,6 +234,7 @@ + #ifdef CONFIG_FB_S3C2410 + s3c24xx_fb_set_platdata(&amlm5900_fb_info); + #endif ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices)); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-bast.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-bast.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-bast.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-bast.c 2009-04-30 09:36:37.000000000 +0200 +@@ -44,8 +44,8 @@ + #include + #include + +-#include +-#include ++#include ++#include + #include + + #include +@@ -406,7 +406,7 @@ + * standard 100KHz i2c bus frequency + */ + +-static struct s3c2410_platform_i2c bast_i2c_info = { ++static struct s3c2410_platform_i2c __initdata bast_i2c_info = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, +@@ -553,7 +553,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &bast_device_dm9k, +@@ -588,7 +588,8 @@ + s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); + + s3c_device_nand.dev.platform_data = &bast_nand_info; +- s3c_device_i2c.dev.platform_data = &bast_i2c_info; ++ ++ s3c_i2c0_set_platdata(&bast_i2c_info); + + s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); + s3c24xx_init_clocks(0); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-h1940.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-h1940.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-h1940.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-h1940.c 2009-04-30 09:36:37.000000000 +0200 +@@ -38,11 +38,13 @@ + #include + #include + #include +-#include ++#include ++#include + + #include + #include + #include ++#include + #include + + static struct map_desc h1940_iodesc[] __initdata = { +@@ -183,7 +185,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_usbgadget, + &s3c_device_leds, +@@ -215,6 +217,7 @@ + + s3c24xx_fb_set_platdata(&h1940_fb_info); + s3c24xx_udc_set_platdata(&h1940_udc_cfg); ++ s3c_i2c0_set_platdata(NULL); + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ +@@ -223,10 +226,9 @@ + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + +- tmp = ( +- 0x78 << S3C2410_PLLCON_MDIVSHIFT) +- | (0x02 << S3C2410_PLLCON_PDIVSHIFT) +- | (0x03 << S3C2410_PLLCON_SDIVSHIFT); ++ tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT) ++ | (0x02 << S3C24XX_PLLCON_PDIVSHIFT) ++ | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); + writel(tmp, S3C2410_UPLLCON); + + platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-n30.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-n30.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-n30.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-n30.c 2009-04-30 09:36:37.000000000 +0200 +@@ -40,14 +40,14 @@ + #include + #include + +-#include ++#include + #include + + #include + #include + #include + #include +-#include ++#include + + static struct map_desc n30_iodesc[] __initdata = { + /* nothing here yet */ +@@ -320,7 +320,7 @@ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_usb, + &s3c_device_usbgadget, +@@ -332,7 +332,7 @@ + static struct platform_device *n35_devices[] __initdata = { + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_usbgadget, + &n35_button_device, +@@ -501,7 +501,7 @@ + static void __init n30_init(void) + { + s3c24xx_fb_set_platdata(&n30_fb_info); +- s3c_device_i2c.dev.platform_data = &n30_i2ccfg; ++ s3c_device_i2c0.dev.platform_data = &n30_i2ccfg; + s3c24xx_udc_set_platdata(&n30_udc_cfg); + + /* Turn off suspend on both USB ports, and switch the +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-otom.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-otom.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-otom.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-otom.c 2009-04-30 09:36:37.000000000 +0200 +@@ -35,6 +35,7 @@ + #include + #include + #include ++#include + #include + + static struct map_desc otom11_iodesc[] __initdata = { +@@ -94,7 +95,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_rtc, + &otom_device_nor, +@@ -109,6 +110,7 @@ + + static void __init otom11_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices)); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-qt2410.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-qt2410.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-qt2410.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-qt2410.c 2009-04-30 09:36:37.000000000 +0200 +@@ -50,10 +50,11 @@ + #include + #include + #include +-#include +-#include ++#include ++#include + #include + #include ++#include + + #include + #include +@@ -247,7 +248,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_sdi, + &s3c_device_usbgadget, +@@ -349,6 +350,7 @@ + s3c2410_gpio_setpin(S3C2410_GPB0, 1); + + s3c24xx_udc_set_platdata(&qt2410_udc_cfg); ++ s3c_i2c0_set_platdata(NULL); + + s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-smdk2410.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-smdk2410.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-smdk2410.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-smdk2410.c 2009-04-30 09:36:37.000000000 +0200 +@@ -47,6 +47,7 @@ + #include + + #include ++#include + + #include + #include +@@ -89,7 +90,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + }; + +@@ -102,6 +103,7 @@ + + static void __init smdk2410_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices)); + smdk_machine_init(); + } +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-tct_hammer.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-tct_hammer.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-tct_hammer.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-tct_hammer.c 2009-04-30 09:36:37.000000000 +0200 +@@ -45,6 +45,7 @@ + #include + + #include ++#include + #include + #include + +@@ -127,7 +128,7 @@ + static struct platform_device *tct_hammer_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, +@@ -146,6 +147,7 @@ + + static void __init tct_hammer_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices)); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/mach-vr1000.c linux-2.6.28.6/arch/arm/mach-s3c2410/mach-vr1000.c +--- linux-2.6.28/arch/arm/mach-s3c2410/mach-vr1000.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/mach-vr1000.c 2009-04-30 09:36:37.000000000 +0200 +@@ -47,6 +47,7 @@ + #include + #include + #include ++#include + + #include "usb-simtec.h" + #include "nor-simtec.h" +@@ -334,7 +335,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_adc, + &serial_device, + &vr1000_dm9k0, +@@ -384,6 +385,7 @@ + + static void __init vr1000_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices)); + + i2c_register_board_info(0, vr1000_i2c_devs, +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2410/s3c2410.c linux-2.6.28.6/arch/arm/mach-s3c2410/s3c2410.c +--- linux-2.6.28/arch/arm/mach-s3c2410/s3c2410.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2410/s3c2410.c 2009-04-30 09:36:37.000000000 +0200 +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -28,6 +29,8 @@ + #include + #include + ++#include ++ + #include + #include + +@@ -35,6 +38,7 @@ + #include + #include + #include ++#include + + /* Initial IO mappings */ + +@@ -59,25 +63,28 @@ + * machine specific initialisation. + */ + +-void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size) ++void __init s3c2410_map_io(void) + { +- /* register our io-tables */ +- + iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); +- iotable_init(mach_desc, mach_size); + } + +-void __init s3c2410_init_clocks(int xtal) ++void __init_or_cpufreq s3c2410_setup_clocks(void) + { ++ struct clk *xtal_clk; + unsigned long tmp; ++ unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + ++ xtal_clk = clk_get(NULL, "xtal"); ++ xtal = clk_get_rate(xtal_clk); ++ clk_put(xtal_clk); ++ + /* now we've got our machine bits initialised, work out what + * clocks we've got */ + +- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); ++ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); + + tmp = __raw_readl(S3C2410_CLKDIVN); + +@@ -95,7 +102,13 @@ + * console to use them + */ + +- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); ++ s3c24xx_setup_clocks(fclk, hclk, pclk); ++} ++ ++void __init s3c2410_init_clocks(int xtal) ++{ ++ s3c24xx_register_baseclocks(xtal); ++ s3c2410_setup_clocks(); + s3c2410_baseclk_add(); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2412/clock.c linux-2.6.28.6/arch/arm/mach-s3c2412/clock.c +--- linux-2.6.28/arch/arm/mach-s3c2412/clock.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2412/clock.c 2009-04-30 09:36:37.000000000 +0200 +@@ -93,12 +93,6 @@ + + /* clock selections */ + +-/* CPU EXTCLK input */ +-static struct clk clk_ext = { +- .name = "extclk", +- .id = -1, +-}; +- + static struct clk clk_erefclk = { + .name = "erefclk", + .id = -1, +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2412/dma.c linux-2.6.28.6/arch/arm/mach-s3c2412/dma.c +--- linux-2.6.28/arch/arm/mach-s3c2412/dma.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2412/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -26,13 +26,13 @@ + + #include + #include +-#include ++#include + #include + #include + #include + #include + #include +-#include ++#include + + #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2412/mach-jive.c linux-2.6.28.6/arch/arm/mach-s3c2412/mach-jive.c +--- linux-2.6.28/arch/arm/mach-s3c2412/mach-jive.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2412/mach-jive.c 2009-04-30 09:36:37.000000000 +0200 +@@ -31,8 +31,8 @@ + #include + + #include +-#include +-#include ++#include ++#include + + #include + #include +@@ -52,7 +52,8 @@ + #include + #include + #include +-#include ++#include ++#include + + static struct map_desc jive_iodesc[] __initdata = { + }; +@@ -450,14 +451,14 @@ + + /* I2C bus and device configuration. */ + +-static struct s3c2410_platform_i2c jive_i2c_cfg = { ++static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = { + .max_freq = 80 * 1000, + .bus_freq = 50 * 1000, + .flags = S3C_IICFLG_FILTER, + .sda_delay = 2, + }; + +-static struct i2c_board_info jive_i2c_devs[] = { ++static struct i2c_board_info jive_i2c_devs[] __initdata = { + [0] = { + I2C_BOARD_INFO("lis302dl", 0x1c), + .irq = IRQ_EINT14, +@@ -470,7 +471,7 @@ + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_lcd, + &jive_device_lcdspi, + &jive_device_wm8750, +@@ -663,7 +664,7 @@ + + spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs)); + +- s3c_device_i2c.dev.platform_data = &jive_i2c_cfg; ++ s3c_i2c0_set_platdata(&jive_i2c_cfg); + i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs)); + + pm_power_off = jive_power_off; +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2412/mach-smdk2413.c linux-2.6.28.6/arch/arm/mach-s3c2412/mach-smdk2413.c +--- linux-2.6.28/arch/arm/mach-s3c2412/mach-smdk2413.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2412/mach-smdk2413.c 2009-04-30 09:36:37.000000000 +0200 +@@ -37,7 +37,8 @@ + #include + + #include +-#include ++#include ++#include + #include + + #include +@@ -105,7 +106,7 @@ + &s3c_device_usb, + //&s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_usbgadget, + }; +@@ -142,6 +143,7 @@ + + + s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); ++ s3c_i2c0_set_platdata(NULL); + + platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices)); + smdk_machine_init(); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2412/mach-vstms.c linux-2.6.28.6/arch/arm/mach-s3c2412/mach-vstms.c +--- linux-2.6.28/arch/arm/mach-s3c2412/mach-vstms.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2412/mach-vstms.c 2009-04-30 09:36:37.000000000 +0200 +@@ -39,7 +39,8 @@ + #include + #include + +-#include ++#include ++#include + + #include + #include +@@ -122,7 +123,7 @@ + static struct platform_device *vstms_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_nand, +@@ -151,6 +152,7 @@ + + static void __init vstms_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2412/s3c2412.c linux-2.6.28.6/arch/arm/mach-s3c2412/s3c2412.c +--- linux-2.6.28/arch/arm/mach-s3c2412/s3c2412.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2412/s3c2412.c 2009-04-30 09:36:37.000000000 +0200 +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -33,13 +34,15 @@ + #include + #include + ++#include ++ + #include + #include + #include + #include + #include + #include +-#include ++#include + #include + + #include +@@ -47,6 +50,7 @@ + #include + #include + #include ++#include + + #ifndef CONFIG_CPU_S3C2412_ONLY + void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; +@@ -136,7 +140,7 @@ + * machine specific initialisation. + */ + +-void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) ++void __init s3c2412_map_io(void) + { + /* move base of IO */ + +@@ -153,20 +157,25 @@ + /* register our io-tables */ + + iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); +- iotable_init(mach_desc, mach_size); + } + +-void __init s3c2412_init_clocks(int xtal) ++void __init_or_cpufreq s3c2412_setup_clocks(void) + { ++ struct clk *xtal_clk; + unsigned long tmp; ++ unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + ++ xtal_clk = clk_get(NULL, "xtal"); ++ xtal = clk_get_rate(xtal_clk); ++ clk_put(xtal_clk); ++ + /* now we've got our machine bits initialised, work out what + * clocks we've got */ + +- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); ++ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); + + clk_mpll.rate = fclk; + +@@ -183,11 +192,17 @@ + printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", + print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); + ++ s3c24xx_setup_clocks(fclk, hclk, pclk); ++} ++ ++void __init s3c2412_init_clocks(int xtal) ++{ + /* initialise the clocks here, to allow other things like the + * console to use them + */ + +- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); ++ s3c24xx_register_baseclocks(xtal); ++ s3c2412_setup_clocks(); + s3c2412_baseclk_add(); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/Kconfig linux-2.6.28.6/arch/arm/mach-s3c2440/Kconfig +--- linux-2.6.28/arch/arm/mach-s3c2440/Kconfig 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -28,6 +28,7 @@ + config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select CPU_S3C2440 ++ select S3C24XX_DCLK + select PM_SIMTEC if PM + select HAVE_PATA_PLATFORM + help +@@ -37,6 +38,7 @@ + config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select CPU_S3C2440 ++ select S3C24XX_DCLK + select PM_SIMTEC if PM + help + Say Y here if you are using the Simtec IM2440D20 module, also +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/dma.c linux-2.6.28.6/arch/arm/mach-s3c2440/dma.c +--- linux-2.6.28/arch/arm/mach-s3c2440/dma.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -25,12 +25,12 @@ + + #include + #include +-#include ++#include + #include + #include + #include + #include +-#include ++#include + + static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { + [DMACH_XD0] = { +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/mach-anubis.c linux-2.6.28.6/arch/arm/mach-s3c2440/mach-anubis.c +--- linux-2.6.28/arch/arm/mach-s3c2440/mach-anubis.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/mach-anubis.c 2009-04-30 09:36:37.000000000 +0200 +@@ -39,7 +39,8 @@ + #include + #include + #include +-#include ++#include ++#include + + #include + #include +@@ -404,7 +405,7 @@ + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_adc, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &anubis_device_ide0, +@@ -468,6 +469,7 @@ + + static void __init anubis_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); + + i2c_register_board_info(0, anubis_i2c_devs, +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/mach-at2440evb.c linux-2.6.28.6/arch/arm/mach-s3c2440/mach-at2440evb.c +--- linux-2.6.28/arch/arm/mach-s3c2440/mach-at2440evb.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/mach-at2440evb.c 2009-04-30 09:36:37.000000000 +0200 +@@ -35,7 +35,8 @@ + #include + #include + #include +-#include ++#include ++#include + + #include + #include +@@ -166,7 +167,7 @@ + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_adc, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &at2440evb_device_eth, +@@ -183,6 +184,7 @@ + + static void __init at2440evb_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); + } + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/mach-nexcoder.c linux-2.6.28.6/arch/arm/mach-s3c2440/mach-nexcoder.c +--- linux-2.6.28/arch/arm/mach-s3c2440/mach-nexcoder.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/mach-nexcoder.c 2009-04-30 09:36:37.000000000 +0200 +@@ -37,6 +37,7 @@ + //#include + #include + #include ++#include + + #include + #include +@@ -107,7 +108,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_camif, +@@ -142,6 +143,7 @@ + + static void __init nexcoder_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); + }; + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/mach-osiris.c linux-2.6.28.6/arch/arm/mach-s3c2440/mach-osiris.c +--- linux-2.6.28/arch/arm/mach-s3c2440/mach-osiris.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/mach-osiris.c 2009-04-30 09:36:37.000000000 +0200 +@@ -37,7 +37,8 @@ + #include + #include + #include +-#include ++#include ++#include + + #include + #include +@@ -335,7 +336,7 @@ + /* Standard Osiris devices */ + + static struct platform_device *osiris_devices[] __initdata = { +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_wdt, + &s3c_device_nand, + &osiris_pcmcia, +@@ -398,6 +399,8 @@ + sysdev_class_register(&osiris_pm_sysclass); + sysdev_register(&osiris_pm_sysdev); + ++ s3c_i2c0_set_platdata(NULL); ++ + i2c_register_board_info(0, osiris_i2c_devs, + ARRAY_SIZE(osiris_i2c_devs)); + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/mach-rx3715.c linux-2.6.28.6/arch/arm/mach-s3c2440/mach-rx3715.c +--- linux-2.6.28/arch/arm/mach-s3c2440/mach-rx3715.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/mach-rx3715.c 2009-04-30 09:36:37.000000000 +0200 +@@ -42,7 +42,7 @@ + #include + + #include +-#include ++#include + #include + + #include +@@ -179,7 +179,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_nand, + }; +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2440/mach-smdk2440.c linux-2.6.28.6/arch/arm/mach-s3c2440/mach-smdk2440.c +--- linux-2.6.28/arch/arm/mach-s3c2440/mach-smdk2440.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2440/mach-smdk2440.c 2009-04-30 09:36:37.000000000 +0200 +@@ -37,6 +37,7 @@ + + #include + #include ++#include + + #include + #include +@@ -152,7 +153,7 @@ + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, +- &s3c_device_i2c, ++ &s3c_device_i2c0, + &s3c_device_iis, + }; + +@@ -166,6 +167,7 @@ + static void __init smdk2440_machine_init(void) + { + s3c24xx_fb_set_platdata(&smdk2440_fb_info); ++ s3c_i2c0_set_platdata(NULL); + + platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); + smdk_machine_init(); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2443/Kconfig linux-2.6.28.6/arch/arm/mach-s3c2443/Kconfig +--- linux-2.6.28/arch/arm/mach-s3c2443/Kconfig 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2443/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -24,6 +24,7 @@ + bool "SMDK2443" + select CPU_S3C2443 + select MACH_SMDK ++ select S3C_DEV_HSMMC + help + Say Y here if you are using an SMDK2443 + +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2443/clock.c linux-2.6.28.6/arch/arm/mach-s3c2443/clock.c +--- linux-2.6.28/arch/arm/mach-s3c2443/clock.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2443/clock.c 2009-04-30 09:36:37.000000000 +0200 +@@ -39,6 +39,8 @@ + + #include + ++#include ++ + #include + #include + #include +@@ -145,12 +147,6 @@ + + /* clock selections */ + +-/* CPU EXTCLK input */ +-static struct clk clk_ext = { +- .name = "ext", +- .id = -1, +-}; +- + static struct clk clk_mpllref = { + .name = "mpllref", + .parent = &clk_xtal, +@@ -165,14 +161,6 @@ + }; + #endif + +-static struct clk clk_epllref; +- +-static struct clk clk_epll = { +- .name = "epll", +- .parent = &clk_epllref, +- .id = -1, +-}; +- + static struct clk clk_i2s_ext = { + .name = "i2s-ext", + .id = -1, +@@ -1011,22 +999,20 @@ + &clk_prediv, + }; + +-void __init s3c2443_init_clocks(int xtal) ++void __init_or_cpufreq s3c2443_setup_clocks(void) + { +- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); ++ struct clk *xtal_clk; ++ unsigned long xtal; + unsigned long pll; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; +- struct clk *clkp; +- int ret; +- int ptr; + +- /* s3c2443 parents h and p clocks from prediv */ +- clk_h.parent = &clk_prediv; +- clk_p.parent = &clk_prediv; ++ xtal_clk = clk_get(NULL, "xtal"); ++ xtal = clk_get_rate(xtal_clk); ++ clk_put(xtal_clk); + + pll = s3c2443_get_mpll(mpllcon, xtal); + clk_msysclk.rate = pll; +@@ -1036,13 +1022,29 @@ + hclk /= s3c2443_get_hdiv(clkdiv0); + pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + +- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); ++ s3c24xx_setup_clocks(fclk, hclk, pclk); + + printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", + (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(pll), print_mhz(fclk), + print_mhz(hclk), print_mhz(pclk)); + ++ s3c24xx_setup_clocks(fclk, hclk, pclk); ++} ++ ++void __init s3c2443_init_clocks(int xtal) ++{ ++ struct clk *clkp; ++ unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); ++ int ret; ++ int ptr; ++ ++ /* s3c2443 parents h and p clocks from prediv */ ++ clk_h.parent = &clk_prediv; ++ clk_p.parent = &clk_prediv; ++ ++ s3c24xx_register_baseclocks(xtal); ++ s3c2443_setup_clocks(); + s3c2443_clk_initparents(); + + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { +@@ -1056,7 +1058,7 @@ + } + + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); +- ++ clk_epll.parent = &clk_epllref; + clk_usb_bus.parent = &clk_usb_bus_host; + + /* ensure usb bus clock is within correct rate of 48MHz */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2443/dma.c linux-2.6.28.6/arch/arm/mach-s3c2443/dma.c +--- linux-2.6.28/arch/arm/mach-s3c2443/dma.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2443/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -26,12 +26,12 @@ + + #include + #include +-#include ++#include + #include + #include + #include + #include +-#include ++#include + + #define MAP(x) { \ + [0] = (x) | DMA_CH_VALID, \ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2443/mach-smdk2443.c linux-2.6.28.6/arch/arm/mach-s3c2443/mach-smdk2443.c +--- linux-2.6.28/arch/arm/mach-s3c2443/mach-smdk2443.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2443/mach-smdk2443.c 2009-04-30 09:36:37.000000000 +0200 +@@ -37,6 +37,7 @@ + + #include + #include ++#include + + #include + #include +@@ -103,8 +104,8 @@ + + static struct platform_device *smdk2443_devices[] __initdata = { + &s3c_device_wdt, +- &s3c_device_i2c, +- &s3c_device_hsmmc, ++ &s3c_device_i2c0, ++ &s3c_device_hsmmc0, + }; + + static void __init smdk2443_map_io(void) +@@ -116,6 +117,7 @@ + + static void __init smdk2443_machine_init(void) + { ++ s3c_i2c0_set_platdata(NULL); + platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices)); + smdk_machine_init(); + } +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c2443/s3c2443.c linux-2.6.28.6/arch/arm/mach-s3c2443/s3c2443.c +--- linux-2.6.28/arch/arm/mach-s3c2443/s3c2443.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c2443/s3c2443.c 2009-04-30 09:36:37.000000000 +0200 +@@ -81,10 +81,9 @@ + * machine specific initialisation. + */ + +-void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size) ++void __init s3c2443_map_io(void) + { + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); +- iotable_init(mach_desc, mach_size); + } + + /* need to register class before we actually register the device, and +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/debug-macro.S linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/debug-macro.S +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/debug-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/debug-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,28 @@ ++/* arch/arm/mach-s3c2410/include/mach/debug-macro.S ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++/* pull in the relevant register and map files. */ ++ ++#include ++#include ++ ++ .macro addruart, rx ++ mrc p15, 0, \rx, c1, c0 ++ tst \rx, #1 ++ ldreq \rx, = S3C24XX_PA_UART ++ ldrne \rx, = S3C24XX_VA_UART ++#if CONFIG_DEBUG_S3C_UART != 0 ++ add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) ++#endif ++ .endm ++ ++/* include the reset of the code which will do the work, we're only ++ * compiling for a single cpu processor type so the default of s3c2440 ++ * will be fine with us. ++ */ ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/io.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/io.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/io.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/io.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* arch/arm/mach-s3c24a0/include/mach/io.h ++ * ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * ++ * IO access and mapping routines for the S3C24A0 ++ */ ++ ++#ifndef __ASM_ARM_ARCH_IO_H ++#define __ASM_ARM_ARCH_IO_H ++ ++/* No current ISA/PCI bus support. */ ++#define __io(a) ((void __iomem *)(a)) ++#define __mem_pci(a) (a) ++ ++#endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/irqs.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/irqs.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/irqs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/irqs.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,115 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h ++ * ++ * Copyright (c) 2003-2005 Simtec Electronics ++ * Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++ ++#ifndef __ASM_ARCH_24A0_IRQS_H ++#define __ASM_ARCH_24A0_IRQS_H __FILE__ ++ ++#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */ ++/* for generic entry-macro.S */ ++#define IRQ_EINT0 IRQ_EINT0t2 ++ ++#define IRQ_EINT3t6 S3C2410_IRQ(1) ++#define IRQ_EINT7t10 S3C2410_IRQ(2) ++#define IRQ_EINT11t14 S3C2410_IRQ(3) ++#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */ ++#define IRQ_TICK S3C2410_IRQ(5) ++#define IRQ_DCTQ S3C2410_IRQ(6) ++#define IRQ_MC S3C2410_IRQ(7) ++#define IRQ_ME S3C2410_IRQ(8) /* 24 */ ++#define IRQ_KEYPAD S3C2410_IRQ(9) ++#define IRQ_TIMER0 S3C2410_IRQ(10) ++#define IRQ_TIMER1 S3C2410_IRQ(11) ++#define IRQ_TIMER2 S3C2410_IRQ(12) ++#define IRQ_TIMER3_4 S3C2410_IRQ(13) ++#define IRQ_OS_TIMER IRQ_TIMER3_4 ++#define IRQ_LCD S3C2410_IRQ(14) ++#define IRQ_CAM_C S3C2410_IRQ(15) ++#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */ ++#define IRQ_UART0 S3C2410_IRQ(17) ++#define IRQ_CAM_P S3C2410_IRQ(18) ++#define IRQ_MODEM S3C2410_IRQ(19) ++#define IRQ_DMA S3C2410_IRQ(20) ++#define IRQ_SDI S3C2410_IRQ(21) ++#define IRQ_SPI0 S3C2410_IRQ(22) ++#define IRQ_UART1 S3C2410_IRQ(23) ++#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */ ++#define IRQ_USBD S3C2410_IRQ(25) ++#define IRQ_USBH S3C2410_IRQ(26) ++#define IRQ_IIC S3C2410_IRQ(27) ++#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */ ++#define IRQ_VLX_SPI1 S3C2410_IRQ(29) ++#define IRQ_RTC S3C2410_IRQ(30) /* 46 */ ++#define IRQ_ADC_PEN S3C2410_IRQ(31) ++ ++/* interrupts generated from the external interrupts sources */ ++#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */ ++#define IRQ_EINT1 S3C2410_IRQ(33) ++#define IRQ_EINT2 S3C2410_IRQ(34) ++#define IRQ_EINT3 S3C2410_IRQ(35) ++#define IRQ_EINT4 S3C2410_IRQ(36) ++#define IRQ_EINT5 S3C2410_IRQ(37) ++#define IRQ_EINT6 S3C2410_IRQ(38) ++#define IRQ_EINT7 S3C2410_IRQ(39) ++#define IRQ_EINT8 S3C2410_IRQ(40) ++#define IRQ_EINT9 S3C2410_IRQ(41) ++#define IRQ_EINT10 S3C2410_IRQ(42) ++#define IRQ_EINT11 S3C2410_IRQ(43) ++#define IRQ_EINT12 S3C2410_IRQ(44) ++#define IRQ_EINT13 S3C2410_IRQ(45) ++#define IRQ_EINT14 S3C2410_IRQ(46) ++#define IRQ_EINT15 S3C2410_IRQ(47) ++#define IRQ_EINT16 S3C2410_IRQ(48) ++#define IRQ_EINT17 S3C2410_IRQ(49) ++#define IRQ_EINT18 S3C2410_IRQ(50) ++ ++/* SUB IRQS */ ++#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ ++#define IRQ_S3CUART_TX0 S3C2410_IRQ(52) ++#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53) ++ ++#define IRQ_S3CUART_RX1 S3C2410_IRQ(54) ++#define IRQ_S3CUART_TX1 S3C2410_IRQ(55) ++#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56) ++ ++#define IRQ_S3CUART_RX2 (0x0) ++#define IRQ_S3CUART_TX2 (0x0) ++#define IRQ_S3CUART_ERR2 (0x0) ++ ++ ++#define IRQ_IRDA S3C2410_IRQ(57) ++#define IRQ_MSTICK S3C2410_IRQ(58) ++#define IRQ_RESERVED0 S3C2410_IRQ(59) ++#define IRQ_RESERVED1 S3C2410_IRQ(60) ++#define IRQ_RESERVED2 S3C2410_IRQ(61) ++#define IRQ_TIMER3 S3C2410_IRQ(62) ++#define IRQ_TIMER4 S3C2410_IRQ(63) ++#define IRQ_WDT S3C2410_IRQ(64) ++#define IRQ_BATFLT S3C2410_IRQ(65) ++#define IRQ_POST S3C2410_IRQ(66) ++#define IRQ_DISP_FIFO S3C2410_IRQ(67) ++#define IRQ_PENUP S3C2410_IRQ(68) ++#define IRQ_PENDN S3C2410_IRQ(69) ++#define IRQ_ADC S3C2410_IRQ(70) ++#define IRQ_DISP_FRAME S3C2410_IRQ(71) ++#define IRQ_NFLASH S3C2410_IRQ(72) ++#define IRQ_AC97 S3C2410_IRQ(73) ++#define IRQ_SPI1 S3C2410_IRQ(74) ++#define IRQ_VLX S3C2410_IRQ(75) ++#define IRQ_DMA0 S3C2410_IRQ(76) ++#define IRQ_DMA1 S3C2410_IRQ(77) ++#define IRQ_DMA2 S3C2410_IRQ(78) ++#define IRQ_DMA3 S3C2410_IRQ(79) ++ ++#define IRQ_TC (0x0) ++ ++#define NR_IRQS (IRQ_DMA3+1) ++ ++#endif /* __ASM_ARCH_24A0_IRQS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/map.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/map.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/map.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/map.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,85 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/map.h ++ * ++ * Copyright 2003,2007 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C24A0 - Memory map definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_24A0_MAP_H ++#define __ASM_ARCH_24A0_MAP_H __FILE__ ++ ++#include ++#include ++ ++#define S3C24A0_PA_IO_BASE (0x40000000) ++#define S3C24A0_PA_CLKPWR (0x40000000) ++#define S3C24A0_PA_IRQ (0x40200000) ++#define S3C24A0_PA_DMA (0x40400000) ++#define S3C24A0_PA_MEMCTRL (0x40C00000) ++#define S3C24A0_PA_NAND (0x40C00000) ++#define S3C24A0_PA_SROM (0x40C20000) ++#define S3C24A0_PA_SDRAM (0x40C40000) ++#define S3C24A0_PA_BUSM (0x40CE0000) ++#define S3C24A0_PA_USBHOST (0x41000000) ++#define S3C24A0_PA_MODEMIF (0x41180000) ++#define S3C24A0_PA_IRDA (0x41800000) ++#define S3C24A0_PA_TIMER (0x44000000) ++#define S3C24A0_PA_WATCHDOG (0x44100000) ++#define S3C24A0_PA_RTC (0x44200000) ++#define S3C24A0_PA_UART (0x44400000) ++#define S3C24A0_PA_UART0 (S3C24A0_PA_UART) ++#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000) ++#define S3C24A0_PA_SPI (0x44500000) ++#define S3C24A0_PA_IIC (0x44600000) ++#define S3C24A0_PA_IIS (0x44700000) ++#define S3C24A0_PA_GPIO (0x44800000) ++#define S3C24A0_PA_KEYIF (0x44900000) ++#define S3C24A0_PA_USBDEV (0x44A00000) ++#define S3C24A0_PA_AC97 (0x45000000) ++#define S3C24A0_PA_ADC (0x45800000) ++#define S3C24A0_PA_SDI (0x46000000) ++#define S3C24A0_PA_MS (0x46100000) ++#define S3C24A0_PA_LCD (0x4A000000) ++#define S3C24A0_PA_VPOST (0x4A100000) ++ ++/* physical addresses of all the chip-select areas */ ++ ++#define S3C24A0_CS0 (0x00000000) ++#define S3C24A0_CS1 (0x04000000) ++#define S3C24A0_CS2 (0x08000000) ++#define S3C24A0_CS3 (0x0C000000) ++#define S3C24A0_CS4 (0x10000000) ++#define S3C24A0_CS5 (0x40000000) ++ ++#define S3C24A0_SDRAM_PA (S3C24A0_CS4) ++ ++/* Use a single interface for common resources between S3C24XX cpus */ ++ ++#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ ++#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL ++#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST ++#define S3C24XX_PA_DMA S3C24A0_PA_DMA ++#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR ++#define S3C24XX_PA_LCD S3C24A0_PA_LCD ++#define S3C24XX_PA_UART S3C24A0_PA_UART ++#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER ++#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV ++#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG ++#define S3C24XX_PA_IIS S3C24A0_PA_IIS ++#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO ++#define S3C24XX_PA_RTC S3C24A0_PA_RTC ++#define S3C24XX_PA_ADC S3C24A0_PA_ADC ++#define S3C24XX_PA_SPI S3C24A0_PA_SPI ++#define S3C24XX_PA_SDI S3C24A0_PA_SDI ++#define S3C24XX_PA_NAND S3C24A0_PA_NAND ++ ++#define S3C_PA_UART S3C24A0_PA_UART ++#define S3C_PA_IIC S3C24A0_PA_IIC ++ ++#endif /* __ASM_ARCH_24A0_MAP_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/memory.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/memory.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/memory.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/memory.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,19 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h ++ * from linux/include/asm-arm/arch-rpc/memory.h ++ * ++ * Copyright (C) 1996,1997,1998 Russell King. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_24A0_MEMORY_H ++#define __ASM_ARCH_24A0_MEMORY_H __FILE__ ++ ++#define PHYS_OFFSET UL(0x10000000) ++ ++#define __virt_to_bus(x) __virt_to_phys(x) ++#define __bus_to_virt(x) __phys_to_virt(x) ++ ++#endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-clock.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/regs-clock.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-clock.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/regs-clock.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,88 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h ++ * ++ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C24A0 clock register definitions ++*/ ++ ++#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H ++#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__ ++ ++#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10) ++#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14) ++#define S3C24A0_CLKCON S3C2410_CLKREG(0x20) ++#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24) ++#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28) ++ ++/* CLKCON register bits */ ++ ++#define S3C24A0_CLKCON_VLX (1<<29) ++#define S3C24A0_CLKCON_VPOST (1<<28) ++#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */ ++#define S3C24A0_CLKCON_MPEGDCTQ (1<<26) ++#define S3C24A0_CLKCON_VPOSTIF (1<<25) ++#define S3C24A0_CLKCON_MPEG4IF (1<<24) ++#define S3C24A0_CLKCON_CAM_UPLL (1<<23) ++#define S3C24A0_CLKCON_LCDC (1<<22) ++#define S3C24A0_CLKCON_CAM_HCLK (1<<21) ++#define S3C24A0_CLKCON_MPEG4 (1<<20) ++#define S3C24A0_CLKCON_KEYPAD (1<<19) ++#define S3C24A0_CLKCON_ADC (1<<18) ++#define S3C24A0_CLKCON_SDI (1<<17) ++#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */ ++#define S3C24A0_CLKCON_USBD (1<<15) ++#define S3C24A0_CLKCON_GPIO (1<<14) ++#define S3C24A0_CLKCON_IIS (1<<13) ++#define S3C24A0_CLKCON_IIC (1<<12) ++#define S3C24A0_CLKCON_SPI (1<<11) ++#define S3C24A0_CLKCON_UART1 (1<<10) ++#define S3C24A0_CLKCON_UART0 (1<<9) ++#define S3C24A0_CLKCON_PWMT (1<<8) ++#define S3C24A0_CLKCON_USBH (1<<7) ++#define S3C24A0_CLKCON_AC97 (1<<6) ++#define S3C24A0_CLKCON_IrDA (1<<4) ++#define S3C24A0_CLKCON_IDLE (1<<2) ++#define S3C24A0_CLKCON_MON (1<<1) ++#define S3C24A0_CLKCON_STOP (1<<0) ++ ++/* CLKSRC register bits */ ++ ++#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */ ++#define S3C24A0_CLKSRC_UPLL (1<<7) ++#define S3C24A0_CLKSRC_MPLL (1<<5) ++#define S3C24A0_CLKSRC_EXT (1<<4) ++ ++/* Use a single interface with the common code, for s3c24xx */ ++ ++#define S3C2410_MPLLCON S3C24A0_MPLLCON ++#define S3C2410_UPLLCON S3C24A0_UPLLCON ++#define S3C2410_CLKCON S3C24A0_CLKCON ++#define S3C2410_CLKSLOW S3C24A0_CLKSRC ++#define S3C2410_CLKDIVN S3C24A0_CLKDIVN ++ ++#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE ++#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP ++#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC ++#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH ++#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD ++#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT ++#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI ++#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0 ++#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1 ++#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO ++#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC ++#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC ++#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS ++#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI ++ ++#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL ++#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL ++#define S3C2410_CLKSLOW_SLOW (0xFF) ++#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1) ++ ++#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-irq.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/regs-irq.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-irq.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/regs-irq.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,25 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h ++ * ++ * Copyright (c) 2003 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++ ++#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H ++#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__ ++ ++ ++#define S3C2410_EINTMASK S3C2410_EINTREG(0x034) ++#define S3C2410_EINTPEND S3C2410_EINTREG(0X038) ++ ++#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034) ++#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038) ++ ++#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */ ++ ++ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/system.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/system.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/system.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/system.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,25 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/system.h ++ * ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * ++ * S3C24A0 - System function defines and includes ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++ ++#include ++ ++static void arch_idle(void) ++{ ++ /* currently no specific idle support. */ ++} ++ ++void (*s3c24xx_reset_hook)(void); ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/tick.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/tick.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/tick.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/tick.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,15 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h ++ * ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C24A0 - timer tick support ++ */ ++ ++#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0)) ++ ++static inline int s3c24xx_ostimer_pending(void) ++{ ++ return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4; ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/timex.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/timex.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/timex.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/timex.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,18 @@ ++/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h ++ * ++ * Copyright (c) 2008 Simtec Electronics ++ * Ben Dooks ++ * ++ * S3C2410 - time parameters ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_TIMEX_H ++#define __ASM_ARCH_TIMEX_H ++ ++#define CLOCK_TICK_RATE 12000000 ++ ++#endif /* __ASM_ARCH_TIMEX_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/vmalloc.h linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/vmalloc.h +--- linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/vmalloc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c24a0/include/mach/vmalloc.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,17 @@ ++/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h ++ * ++ * Copyright 2008 Simtec Electronics ++ ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C24A0 vmalloc definition ++*/ ++ ++#ifndef __ASM_ARCH_VMALLOC_H ++#define __ASM_ARCH_VMALLOC_H ++ ++#define VMALLOC_END (0xE0000000) ++ ++#endif /* __ASM_ARCH_VMALLOC_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/Kconfig linux-2.6.28.6/arch/arm/mach-s3c6400/Kconfig +--- linux-2.6.28/arch/arm/mach-s3c6400/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,8 @@ ++# arch/arm/mach-s3c6400/Kconfig ++# ++# Copyright 2008 Openmoko, Inc. ++# Simtec Electronics, Ben Dooks ++# ++# Licensed under GPLv2 ++ ++# Currently nothing here, this will be added later +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/Makefile linux-2.6.28.6/arch/arm/mach-s3c6400/Makefile +--- linux-2.6.28/arch/arm/mach-s3c6400/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,15 @@ ++# arch/arm/mach-s3c6400/Makefile ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++obj-y := ++obj-m := ++obj-n := ++obj- := ++ ++# Core support for S3C6400 system ++ ++obj-n += blank.o +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/Makefile.boot linux-2.6.28.6/arch/arm/mach-s3c6400/Makefile.boot +--- linux-2.6.28/arch/arm/mach-s3c6400/Makefile.boot 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/Makefile.boot 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,2 @@ ++ zreladdr-y := 0x50008000 ++params_phys-y := 0x50000100 +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/debug-macro.S linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/debug-macro.S +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/debug-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/debug-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,39 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/debug-macro.S ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++/* pull in the relevant register and map files. */ ++ ++#include ++#include ++ ++ /* note, for the boot process to work we have to keep the UART ++ * virtual address aligned to an 1MiB boundary for the L1 ++ * mapping the head code makes. We keep the UART virtual address ++ * aligned and add in the offset when we load the value here. ++ */ ++ ++ .macro addruart, rx ++ mrc p15, 0, \rx, c1, c0 ++ tst \rx, #1 ++ ldreq \rx, = S3C_PA_UART ++ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) ++#if CONFIG_DEBUG_S3C_UART != 0 ++ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) ++#endif ++ .endm ++ ++/* include the reset of the code which will do the work, we're only ++ * compiling for a single cpu processor type so the default of s3c2440 ++ * will be fine with us. ++ */ ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/dma.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/dma.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/dma.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/dma.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/dma.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - DMA support ++ */ ++ ++#ifndef __ASM_ARCH_DMA_H ++#define __ASM_ARCH_DMA_H __FILE__ ++ ++#include ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/entry-macro.S linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/entry-macro.S +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/entry-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/entry-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,44 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/entry-macro.S ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * Low-level IRQ helper macros for the Samsung S3C64XX series ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++*/ ++ ++#include ++#include ++#include ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ ldr \base, =S3C_VA_VIC0 ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ ++ @ check the vic0 ++ mov \irqnr, # S3C_IRQ_OFFSET + 31 ++ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] ++ teq \irqstat, #0 ++ ++ @ otherwise try vic1 ++ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) ++ addeq \irqnr, \irqnr, #32 ++ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] ++ teqeq \irqstat, #0 ++ ++ clzne \irqstat, \irqstat ++ subne \irqnr, \irqnr, \irqstat ++ .endm +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio-core.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/gpio-core.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio-core.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/gpio-core.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/gpio-core.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C64XX - GPIO core support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_GPIO_CORE_H ++#define __ASM_ARCH_GPIO_CORE_H __FILE__ ++ ++/* currently we just include the platform support */ ++#include ++ ++#endif /* __ASM_ARCH_GPIO_CORE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/gpio.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/gpio.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,96 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/gpio.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C6400 - GPIO lib support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++#define gpio_cansleep __gpio_cansleep ++#define gpio_to_irq __gpio_to_irq ++ ++/* GPIO bank sizes */ ++#define S3C64XX_GPIO_A_NR (8) ++#define S3C64XX_GPIO_B_NR (7) ++#define S3C64XX_GPIO_C_NR (8) ++#define S3C64XX_GPIO_D_NR (5) ++#define S3C64XX_GPIO_E_NR (5) ++#define S3C64XX_GPIO_F_NR (16) ++#define S3C64XX_GPIO_G_NR (7) ++#define S3C64XX_GPIO_H_NR (10) ++#define S3C64XX_GPIO_I_NR (16) ++#define S3C64XX_GPIO_J_NR (12) ++#define S3C64XX_GPIO_K_NR (16) ++#define S3C64XX_GPIO_L_NR (15) ++#define S3C64XX_GPIO_M_NR (6) ++#define S3C64XX_GPIO_N_NR (16) ++#define S3C64XX_GPIO_O_NR (16) ++#define S3C64XX_GPIO_P_NR (15) ++#define S3C64XX_GPIO_Q_NR (9) ++ ++/* GPIO bank numbes */ ++ ++/* CONFIG_S3C_GPIO_SPACE allows the user to select extra ++ * space for debugging purposes so that any accidental ++ * change from one gpio bank to another can be caught. ++*/ ++ ++#define S3C64XX_GPIO_NEXT(__gpio) \ ++ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) ++ ++enum s3c_gpio_number { ++ S3C64XX_GPIO_A_START = 0, ++ S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A), ++ S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B), ++ S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C), ++ S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D), ++ S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E), ++ S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F), ++ S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G), ++ S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H), ++ S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I), ++ S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J), ++ S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K), ++ S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L), ++ S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M), ++ S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N), ++ S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O), ++ S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P), ++}; ++ ++/* S3C64XX GPIO number definitions. */ ++ ++#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr)) ++#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr)) ++#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr)) ++#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr)) ++#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr)) ++#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr)) ++#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr)) ++#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr)) ++#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr)) ++#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr)) ++#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr)) ++#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr)) ++#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr)) ++#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr)) ++#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr)) ++#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr)) ++#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr)) ++ ++/* the end of the S3C64XX specific gpios */ ++#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) ++#define S3C_GPIO_END S3C64XX_GPIO_END ++ ++/* define the number of gpios we need to the one after the GPQ() range */ ++#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/hardware.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/hardware.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/hardware.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/hardware.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - Hardware support ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H __FILE__ ++ ++/* currently nothing here, placeholder */ ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/idle.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/idle.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/idle.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/idle.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,24 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/idle.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C6400 CPU Idle controls ++*/ ++ ++#ifndef __ASM_ARCH_IDLE_H ++#define __ASM_ARCH_IDLE_H __FILE__ ++ ++/* This allows the over-ride of the default idle code, in case there ++ * is any other things to be done over idle (like DVS) ++*/ ++ ++extern void (*s3c64xx_idle)(void); ++ ++extern void s3c64xx_default_idle(void); ++ ++#endif /* __ASM_ARCH_IDLE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/irqs.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/irqs.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/irqs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/irqs.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,20 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - IRQ definitions ++ */ ++ ++#ifndef __ASM_ARCH_IRQS_H ++#define __ASM_ARCH_IRQS_H __FILE__ ++ ++#ifndef __ASM_ARM_IRQ_H ++#error "Do not include this directly, instead #include " ++#endif ++ ++#include ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/map.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/map.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/map.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/map.h 2010-04-21 06:39:24.000000000 +0200 +@@ -0,0 +1,199 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/map.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks a ++ * ++ * S3C64XX - Memory map definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_MAP_H ++#define __ASM_ARCH_MAP_H __FILE__ ++ ++#include ++ ++/* HSMMC units */ ++#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) ++#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) ++#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1) ++#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2) ++#define S3C_SZ_HSMMC SZ_1M ++ ++#define S3C_PA_UART (0x7F005000) ++#define S3C_PA_UART0 (S3C_PA_UART + 0x00) ++#define S3C_PA_UART1 (S3C_PA_UART + 0x400) ++#define S3C_PA_UART2 (S3C_PA_UART + 0x800) ++#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) ++#define S3C_UART_OFFSET (0x400) ++ ++/* See notes on UART VA mapping in debug-macro.S */ ++#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) ++ ++#define S3C_VA_UART0 S3C_VA_UARTx(0) ++#define S3C_VA_UART1 S3C_VA_UARTx(1) ++#define S3C_VA_UART2 S3C_VA_UARTx(2) ++#define S3C_VA_UART3 S3C_VA_UARTx(3) ++#define S3C_SZ_UART SZ_256 ++ ++#define S3C64XX_PA_SYSCON (0x7E00F000) ++#define S3C64XX_PA_TIMER (0x7F006000) ++#define S3C64XX_PA_IIC0 (0x7F004000) ++#define S3C64XX_PA_IIC1 (0x7F00F000) ++ ++#define S3C64XX_PA_GPIO (0x7F008000) ++#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000) ++#define S3C64XX_SZ_GPIO SZ_4K ++ ++#define S3C64XX_PA_SDRAM (0x50000000) ++#define S3C64XX_PA_VIC0 (0x71200000) ++#define S3C64XX_PA_VIC1 (0x71300000) ++ ++#define S3C64XX_VA_SROMC S3C_VA_SROMC ++#define S3C64XX_PA_SROMC (0x70000000) ++#define S3C64XX_SZ_SROMC SZ_1M ++ ++#define S3C64XX_VA_LCD S3C_VA_LCD ++#define S3C64XX_PA_LCD (0x77100000) ++#define S3C64XX_SZ_LCD SZ_1M ++ ++#define S3C64XX_PA_G2D (0x76100000) ++#define S3C64XX_SZ_G2D SZ_1M ++ ++#define S3C64XX_PA_G3D (0x72000000) ++#define S3C64XX_SZ_G3D SZ_16M ++ ++#define S3C64XX_PA_FIMC (0x78000000) ++#define S3C64XX_SZ_FIMC SZ_1M ++ ++#define S3C64XX_PA_ADC (0x7E00B000) ++//#define S3C64XX_PA_SMC9115 (0x18000000) ++//#define S3C64XX_SZ_SMC9115 SZ_512M ++#define S3C64XX_PA_DM9000 (0x18000000) ++#define S3C64XX_SZ_DM9000 SZ_1M ++#define S3C64XX_VA_DM9000 S3C_ADDR(0x03b00300) ++ ++#define S3C6400_PA_AC97 (0x7F001000) ++ ++#define S3C64XX_PA_IIS (0x7F002000) ++#define S3C64XX_PA_RTC (0x7E005000) ++#define S3C64XX_PA_IIS_V40 (0x7F00D000) ++#define S3C_SZ_IIS SZ_8K ++ ++/* DMA controller */ ++#define S3C64XX_PA_DMA (0x75000000) ++ ++/* place VICs close together */ ++#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) ++#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) ++ ++/* Host I/F Indirect & Direct */ ++#define S3C64XX_VA_HOSTIFA S3C_ADDR(0x00B00000) ++#define S3C64XX_PA_HOSTIFA (0x74000000) ++#define S3C64XX_SZ_HOSTIFA SZ_1M ++ ++#define S3C64XX_VA_HOSTIFB S3C_ADDR(0x00C00000) ++#define S3C64XX_PA_HOSTIFB (0x74100000) ++#define S3C64XX_SZ_HOSTIFB SZ_1M ++ ++/* TV-ENCODER */ ++#define S3C6400_PA_TVENC (0x76200000) ++#define S5PC100_PA_TVENC (0xF0000000) ++#define S3C_SZ_TVENC SZ_1M ++ ++/* TV-SCALER*/ ++#define S3C6400_PA_TVSCALER (0x76300000) ++#define S3C_SZ_TVSCALER SZ_1M ++ ++/* Rotator */ ++#define S3C6400_PA_ROTATOR (0x77200000) ++#define S3C_SZ_ROTATOR SZ_1M ++ ++/* JPEG */ ++#define S3C6400_PA_JPEG (0x78800000) ++#define S3C_SZ_JPEG SZ_4M ++ ++/* VPP */ ++#define S3C6400_PA_VPP (0x77000000) ++#define S5PC100_PA_VPP (0xF0100000) ++#define S3C_SZ_VPP SZ_1M ++ ++/* MFC */ ++#define S3C6400_PA_MFC (0x7E002000) ++#define S5PC100_PA_MFC (0xF1000000) ++#define S3C_SZ_MFC SZ_4K ++ ++/* NAND flash controller */ ++#define S3C64XX_PA_NAND (0x70200000) ++#define S3C64XX_SZ_NAND SZ_1M ++ ++/* OneNAND */ ++#define S3C64XX_PA_ONENAND (0x70100000) ++#define S3C_SZ_ONENAND SZ_1M ++ ++/* USB Host */ ++#define S3C64XX_PA_USBHOST (0x74300000) ++#define S3C64XX_SZ_USBHOST SZ_1M ++ ++/* USB OTG */ ++#define S3C64XX_VA_OTG S3C_ADDR(0x03900000) ++#define S3C64XX_PA_OTG (0x7C000000) ++#define S3C64XX_SZ_OTG SZ_1M ++ ++/* USB OTG SFR */ ++#define S3C64XX_VA_OTGSFR S3C_ADDR(0x03a00000) ++#define S3C64XX_PA_OTGSFR (0x7C100000) ++#define S3C64XX_SZ_OTGSFR SZ_1M ++ ++#define S3C64XX_PA_KEYPAD (0x7E00A000) ++#define S3C64XX_SZ_KEYPAD SZ_4K ++ ++/* SPI */ ++#define S3C64XX_PA_SPI (0x7F00B000) ++#define S3C64XX_PA_SPI0 (0x7F00B000) ++#define S3C64XX_PA_SPI1 (0x7F00C000) ++#define S3C64XX_SZ_SPI SZ_8K ++#define S3C64XX_SZ_SPI0 SZ_4K ++#define S3C64XX_SZ_SPI1 SZ_4K ++ ++/* Watchdog */ ++#define S3C64XX_PA_WATCHDOG (0x7E004000) ++#define S3C64XX_SZ_WATCHDOG SZ_4K ++ ++/* compatibiltiy defines. */ ++#define S3C_PA_TIMER S3C64XX_PA_TIMER ++#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 ++#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 ++#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 ++#define S3C_PA_IIC S3C64XX_PA_IIC0 ++#define S3C_PA_IIC1 S3C64XX_PA_IIC1 ++ ++#define S3C_PA_RTC S3C64XX_PA_RTC ++ ++#define S3C_PA_SPI S3C64XX_PA_SPI ++#define S3C_PA_SPI0 S3C64XX_PA_SPI0 ++#define S3C_PA_SPI1 S3C64XX_PA_SPI1 ++#define S3C_SZ_SPI S3C64XX_SZ_SPI ++#define S3C_SZ_SPI0 S3C64XX_SZ_SPI0 ++#define S3C_SZ_SPI1 S3C64XX_SZ_SPI1 ++ ++#define S3C_PA_IIS S3C64XX_PA_IIS ++#define S3C_PA_ADC S3C64XX_PA_ADC ++#define S3C_PA_DMA S3C64XX_PA_DMA ++ ++#define S3C_VA_OTG S3C64XX_VA_OTG ++#define S3C_PA_OTG S3C64XX_PA_OTG ++#define S3C_SZ_OTG S3C64XX_SZ_OTG ++ ++#define S3C_VA_OTGSFR S3C64XX_VA_OTGSFR ++#define S3C_PA_OTGSFR S3C64XX_PA_OTGSFR ++#define S3C_SZ_OTGSFR S3C64XX_SZ_OTGSFR ++ ++#define S3C_PA_KEYPAD S3C64XX_PA_KEYPAD ++#define S3C_SZ_KEYPAD S3C64XX_SZ_KEYPAD ++ ++#endif /* __ASM_ARCH_6400_MAP_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/memory.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/memory.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/memory.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/memory.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,22 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/memory.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_MEMORY_H ++#define __ASM_ARCH_MEMORY_H ++ ++#define PHYS_OFFSET UL(0x50000000) ++#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) ++ ++#define __virt_to_bus(x) __virt_to_phys(x) ++#define __bus_to_virt(x) __phys_to_virt(x) ++ ++#endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-irq.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/regs-irq.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-irq.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/regs-irq.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,69 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C64XX - IRQ register definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_REGS_IRQ_H ++#define __ASM_ARCH_REGS_IRQ_H __FILE__ ++ ++#include ++#include ++/* interrupt controller */ ++#define S3C_VIC0REG(x) ((x) + S3C_VA_VIC0) ++#define S3C_VIC1REG(x) ((x) + S3C_VA_VIC1) ++ ++#define S3C64XX_VIC0IRQSTATUS S3C_VIC0REG(0x000) ++#define S3C64XX_VIC1IRQSTATUS S3C_VIC1REG(0x000) ++ ++#define S3C64XX_VIC0FIQSTATUS S3C_VIC0REG(0x004) ++#define S3C64XX_VIC1FIQSTATUS S3C_VIC1REG(0x004) ++ ++#define S3C64XX_VIC0RAWINTR S3C_VIC0REG(0x008) ++#define S3C64XX_VIC1RAWINTR S3C_VIC1REG(0x008) ++ ++#define S3C64XX_VIC0INTSELECT S3C_VIC0REG(0x00C) ++#define S3C64XX_VIC1INTSELECT S3C_VIC1REG(0x00C) ++ ++#define S3C64XX_VIC0INTENABLE S3C_VIC0REG(0x010) ++#define S3C64XX_VIC1INTENABLE S3C_VIC1REG(0x010) ++ ++#define S3C64XX_VIC0INTENCLEAR S3C_VIC0REG(0x014) ++#define S3C64XX_VIC1INTENCLEAR S3C_VIC1REG(0x014) ++ ++#define S3C64XX_VIC0SOFTINT S3C_VIC0REG(0x018) ++#define S3C64XX_VIC1SOFTINT S3C_VIC1REG(0x018) ++ ++#define S3C64XX_VIC0SOFTINTCLEAR S3C_VIC0REG(0x01C) ++#define S3C64XX_VIC1SOFTINTCLEAR S3C_VIC1REG(0x01C) ++ ++#define S3C64XX_VIC0PROTECTION S3C_VIC0REG(0x020) ++#define S3C64XX_VIC1PROTECTION S3C_VIC1REG(0x020) ++ ++#define S3C64XX_VIC0SWPRIORITYMASK S3C_VIC0REG(0x024) ++#define S3C64XX_VIC1SWPRIORITYMASK S3C_VIC1REG(0x024) ++ ++#define S3C64XX_VIC0PRIORITYDAISY S3C_VIC0REG(0x028) ++#define S3C64XX_VIC1PRIORITYDAISY S3C_VIC1REG(0x028) ++ ++#define S3C64XX_VIC0VECTADDR0 S3C_VIC0REG(0x100) ++#define S3C64XX_VIC1VECTADDR0 S3C_VIC1REG(0x100) ++ ++#define S3C64XX_VIC0VECTADDR1 S3C_VIC0REG(0x104) ++#define S3C64XX_VIC1VECTADDR1 S3C_VIC1REG(0x104) ++ ++#define S3C64XX_VIC0VECTADDR2 S3C_VIC0REG(0x108) ++#define S3C64XX_VIC1VECTADDR2 S3C_VIC1REG(0x108) ++ ++#define S3C64XX_VIC0ADDRESS S3C_VIC0REG(0xF00) ++#define S3C64XX_VIC1ADDRESS S3C_VIC1REG(0xF00) ++ ++#endif /* __ASM_ARCH_6400_REGS_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-mem.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/regs-mem.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-mem.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/regs-mem.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,70 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/regs-mem.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C2410 Memory Control register definitions ++*/ ++ ++#ifndef __ASM_ARM_MEMREGS_H ++#define __ASM_ARM_MEMREGS_H ++ ++#ifndef S3C64XX_MEMREG ++#define S3C64XX_MEMREG(x) (S3C64XX_VA_SROMC + (x)) ++#endif ++ ++ ++/* Bank Idle Cycle Control Registers 0-5 */ ++#define S3C64XX_SROM_BW S3C64XX_MEMREG(0x00) ++ ++#define S3C64XX_SROM_BC0 S3C64XX_MEMREG(0x04) ++#define S3C64XX_SROM_BC1 S3C64XX_MEMREG(0x08) ++#define S3C64XX_SROM_BC2 S3C64XX_MEMREG(0x0C) ++#define S3C64XX_SROM_BC3 S3C64XX_MEMREG(0x10) ++#define S3C64XX_SROM_BC4 S3C64XX_MEMREG(0x14) ++#define S3C64XX_SROM_BC5 S3C64XX_MEMREG(0x18) ++ ++/* SROM BW */ ++#define S3C64XX_SROM_BW_DATA_WIDTH0_8BIT (0 << 0) ++#define S3C64XX_SROM_BW_DATA_WIDTH0_16BIT (1 << 0) ++#define S3C64XX_SROM_BW_DATA_WIDTH0_MASK (1 << 0) ++ ++#define S3C64XX_SROM_BW_WAIT_ENABLE0_DISABLE (0 << 2) ++#define S3C64XX_SROM_BW_WAIT_ENABLE0_ENABLE (1 << 2) ++#define S3C64XX_SROM_BW_WAIT_ENABLE0_MASK (1 << 2) ++ ++#define S3C64XX_SROM_BW_BYTE_ENABLE0_DISABLE (0 << 3) ++#define S3C64XX_SROM_BW_BYTE_ENABLE0_ENABLE (1 << 3) ++#define S3C64XX_SROM_BW_BYTE_ENABLE0_MASK (1 << 3) ++ ++#define S3C64XX_SROM_BW_DATA_WIDTH1_8BIT (0 << 4) ++#define S3C64XX_SROM_BW_DATA_WIDTH1_16BIT (1 << 4) ++#define S3C64XX_SROM_BW_DATA_WIDTH1_MASK (1 << 4) ++ ++#define S3C64XX_SROM_BW_WAIT_ENABLE1_DISABLE (0 << 6) ++#define S3C64XX_SROM_BW_WAIT_ENABLE1_ENABLE (1 << 6) ++#define S3C64XX_SROM_BW_WAIT_ENABLE1_MASK (1 << 6) ++ ++#define S3C64XX_SROM_BW_BYTE_ENABLE1_DISABLE (0 << 7) ++#define S3C64XX_SROM_BW_BYTE_ENABLE1_ENABLE (1 << 7) ++#define S3C64XX_SROM_BW_BYTE_ENABLE1_MASK (1 << 7) ++ ++#define S3C64XX_SROM_BW_DATA_WIDTH2_8BIT (0 << 8) ++#define S3C64XX_SROM_BW_DATA_WIDTH2_16BIT (1 << 8) ++#define S3C64XX_SROM_BW_DATA_WIDTH2_MASK (1 << 8) ++ ++/* SROM BCn */ ++#define S3C64XX_SROM_BCn_TACS(x) (x << 28) ++#define S3C64XX_SROM_BCn_TCOS(x) (x << 24) ++#define S3C64XX_SROM_BCn_TACC(x) (x << 16) ++#define S3C64XX_SROM_BCn_TCOH(x) (x << 12) ++#define S3C64XX_SROM_BCn_TCAH(x) (x << 8) ++#define S3C64XX_SROM_BCn_TACP(x) (x << 4) ++#define S3C64XX_SROM_BCn_PMC_NORMAL (0 << 0) ++#define S3C64XX_SROM_BCn_PMC_4 (1 << 0) ++ ++#endif /* __ASM_ARM_MEMREGS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/system.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/system.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/system.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/system.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,48 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/system.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - system implementation ++ */ ++ ++#ifndef __ASM_ARCH_SYSTEM_H ++#define __ASM_ARCH_SYSTEM_H __FILE__ ++ ++#include ++#include ++#include ++ ++void (*s3c64xx_idle)(void); ++void (*s3c64xx_reset_hook)(void); ++ ++void s3c64xx_default_idle(void) ++{ ++ /* nothing here yet */ ++} ++ ++static void arch_idle(void) ++{ ++ if (s3c64xx_idle != NULL) ++ (s3c64xx_idle)(); ++ else ++ s3c64xx_default_idle(); ++} ++ ++static void arch_reset(char mode) ++{ ++ void __iomem *wdt_reg; ++ ++ wdt_reg = ioremap(S3C64XX_PA_WATCHDOG,S3C64XX_SZ_WATCHDOG); ++ ++ /* nothing here yet */ ++ ++ writel(S3C2410_WTCNT_CNT, wdt_reg + S3C2410_WTCNT_OFFSET); /* Watchdog Count Register*/ ++ writel(S3C2410_WTCNT_CON, wdt_reg + S3C2410_WTCON_OFFSET); /* Watchdog Controller Register*/ ++ writel(S3C2410_WTCNT_DAT, wdt_reg + S3C2410_WTDAT_OFFSET); /* Watchdog Data Register*/ ++ ++} ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/tick.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/tick.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/tick.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/tick.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,29 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/tick.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C64XX - Timer tick support definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_TICK_H ++#define __ASM_ARCH_TICK_H __FILE__ ++ ++/* note, the timer interrutps turn up in 2 places, the vic and then ++ * the timer block. We take the VIC as the base at the moment. ++ */ ++static inline u32 s3c24xx_ostimer_pending(void) ++{ ++ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); ++ return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); ++} ++ ++#define TICK_MAX (0xffffffff) ++ ++#endif /* __ASM_ARCH_6400_TICK_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/uncompress.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/uncompress.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/uncompress.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/uncompress.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,26 @@ ++/* linux/arch/arm/mach-s3c6400/include/mach/uncompress.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C6400 - uncompress code ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_UNCOMPRESS_H ++#define __ASM_ARCH_UNCOMPRESS_H ++ ++#include ++#include ++ ++static void arch_detect_cpu(void) ++{ ++ /* we do not need to do any cpu detection here at the moment. */ ++} ++ ++#endif /* __ASM_ARCH_UNCOMPRESS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6400/include/mach/usb-control.h linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/usb-control.h +--- linux-2.6.28/arch/arm/mach-s3c6400/include/mach/usb-control.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6400/include/mach/usb-control.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,41 @@ ++/* arch/arm/mach-s3c2410/include/mach/usb-control.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * Ben Dooks ++ * ++ * S3C2410 - usb port information ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_USBCONTROL_H ++#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c6400/include/mach/usb-control.h" ++ ++#define S3C_HCDFLG_USED (1) ++ ++struct s3c2410_hcd_port { ++ unsigned char flags; ++ unsigned char power; ++ unsigned char oc_status; ++ unsigned char oc_changed; ++}; ++ ++struct s3c2410_hcd_info { ++ struct usb_hcd *hcd; ++ struct s3c2410_hcd_port port[2]; ++ ++ void (*power_control)(int port, int to); ++ void (*enable_oc)(struct s3c2410_hcd_info *, int on); ++ void (*report_oc)(struct s3c2410_hcd_info *, int ports); ++}; ++ ++static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) ++{ ++ if (info->report_oc != NULL) { ++ (info->report_oc)(info, ports); ++ } ++} ++ ++#endif /*__ASM_ARCH_USBCONTROL_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/Kconfig linux-2.6.28.6/arch/arm/mach-s3c6410/Kconfig +--- linux-2.6.28/arch/arm/mach-s3c6410/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/Kconfig 2009-11-01 09:58:26.000000000 +0100 +@@ -0,0 +1,70 @@ ++# arch/arm/mach-s3c6410/Kconfig ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++# Configuration options for the S3C6410 CPU ++ ++config CPU_S3C6410 ++ bool ++ select CPU_S3C6400_INIT ++ select CPU_S3C6400_CLOCK ++ help ++ Enable S3C6410 CPU support ++ ++config S3C6410_SETUP_SDHCI ++ bool ++ help ++ Internal helper functions for S3C6410 based SDHCI systems ++ ++config MACH_SMDK6410 ++ bool "SMDK6410" ++ select CPU_S3C6410 ++ select S3C_DEV_HSMMC ++ select S3C_DEV_HSMMC1 ++ select S3C_DEV_HSMMC2 ++# select S3C_DEV_I2C1 ++ select S3C6410_SETUP_SDHCI ++# select S3C64XX_SETUP_I2C1 ++ select S3C_DMA_PL080 ++ help ++ Machine support for the Samsung SMDK6410 ++ ++# At least some of the SMDK6410s were shipped with the card detect ++# for the MMC/SD slots connected to the same input. This means that ++# either the boards need to be altered to have channel0 to an alternate ++# configuration or that only one slot can be used. ++ ++menu "SMDK6410 MMC/SD slot setup" ++ depends on MACH_SMDK6410 ++ ++config SMDK6410_SD_CH0 ++ bool "Use channel 0" ++ depends on MACH_SMDK6410 ++ help ++ Select CON7 (channel 0) as the MMC/SD slot, as ++ at least some SMDK6410 boards come with the ++ resistors fitted so that the card detects for ++ channels 0 and 1 are the same. ++ ++config SMDK6410_SD_CH1 ++ bool "Use channel 1" ++ depends on MACH_SMDK6410 ++ help ++ Select CON6 (channel 1) as the MMC/SD slot, as ++ at least some SMDK6410 boards come with the ++ resistors fitted so that the card detects for ++ channels 0 and 1 are the same. ++ ++config SMDK6410_SD_CH2 ++ bool "Use channel 2" ++ depends on MACH_SMDK6410 ++ help ++ Select CON6 (channel 1) as the MMC/SD slot, as ++ at least some SMDK6410 boards come with the ++ resistors fitted so that the card detects for ++ channels 0 and 1 are the same. ++ ++endmenu +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/Makefile linux-2.6.28.6/arch/arm/mach-s3c6410/Makefile +--- linux-2.6.28/arch/arm/mach-s3c6410/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,28 @@ ++# arch/arm/plat-s3c6410/Makefile ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++obj-y := ++obj-m := ++obj-n := ++obj- := ++ ++# Core support for S3C6410 system ++ ++obj-$(CONFIG_CPU_S3C6410) += cpu.o ++obj-$(CONFIG_CPU_S3C6410) += dma.o ++obj-$(CONFIG_CPU_S3C6410) += irq.o ++ ++ ++# Helper and device support ++ ++obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o ++ ++obj-$(CONFIG_PM) += pm.o ++ ++# machine support ++ ++obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/cpu.c linux-2.6.28.6/arch/arm/mach-s3c6410/cpu.c +--- linux-2.6.28/arch/arm/mach-s3c6410/cpu.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/cpu.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,133 @@ ++/* linux/arch/arm/mach-s3c6410/cpu.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Initial IO mappings */ ++ ++static struct map_desc s3c6410_iodesc[] __initdata = { ++ IODESC_ENT(LCD), ++ IODESC_ENT(SROMC), ++ IODESC_ENT(HOSTIFB), ++ IODESC_ENT(OTG), ++ IODESC_ENT(OTGSFR), ++}; ++ ++static void s3c6410_idle(void) ++{ ++ unsigned long tmp; ++ ++ /* Ensure our idle mode is to go to idle */ ++ /* Set WFI instruction to SLEEP mode */ ++ ++ tmp = __raw_readl(S3C_PWR_CFG); ++ tmp &= ~(0x3<<5); ++ tmp |= (0x1<<5); ++ __raw_writel(tmp, S3C_PWR_CFG); ++ ++ cpu_do_idle(); ++} ++ ++/* s3c6410_map_io ++ * ++ * register the standard cpu IO areas ++*/ ++ ++void __init s3c6410_map_io(void) ++{ ++ iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc)); ++ ++ /* initialise device information early */ ++ s3c6410_default_sdhci0(); ++ s3c6410_default_sdhci1(); ++ s3c6410_default_sdhci2(); ++ ++ /* the i2c devices are directly compatible with s3c2440 */ ++ s3c_i2c0_setname("s3c2440-i2c"); ++ s3c_i2c1_setname("s3c2440-i2c"); ++ ++ /* set our idle function */ ++ s3c64xx_idle = s3c6410_idle; ++} ++ ++void __init s3c6410_init_clocks(int xtal) ++{ ++ printk(KERN_DEBUG "%s: initialising clocks\n", __func__); ++ s3c24xx_register_baseclocks(xtal); ++ s3c64xx_register_clocks(); ++ s3c6400_register_clocks(); ++ s3c6400_setup_clocks(); ++#ifdef CONFIG_HAVE_PWM ++ s3c24xx_pwmclk_init(); ++#endif ++} ++ ++void __init s3c6410_init_irq(void) ++{ ++ /* VIC0 is missing IRQ7, VIC1 is fully populated. */ ++ s3c64xx_init_irq(~0 & ~(1 << 7), ~0); ++} ++ ++struct sysdev_class s3c6410_sysclass = { ++ .name = "s3c6410-core", ++}; ++ ++static struct sys_device s3c6410_sysdev = { ++ .cls = &s3c6410_sysclass, ++}; ++ ++static int __init s3c6410_core_init(void) ++{ ++ return sysdev_class_register(&s3c6410_sysclass); ++} ++ ++core_initcall(s3c6410_core_init); ++ ++int __init s3c6410_init(void) ++{ ++ printk("S3C6410: Initialising architecture\n"); ++ ++ return sysdev_register(&s3c6410_sysdev); ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/dma.c linux-2.6.28.6/arch/arm/mach-s3c6410/dma.c +--- linux-2.6.28/arch/arm/mach-s3c6410/dma.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,364 @@ ++/* linux/arch/arm/mach-s3c6410/dma.c ++ * ++ * Copyright (c) 2003-2005,2006 Samsung Electronics ++ * ++ * S3C6410 DMA selection ++ * ++ * http://www.samsung.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++ ++/* DMAC-0 */ ++#define MAP0(x) { \ ++ [0] = (x) | DMA_CH_VALID, \ ++ [1] = (x) | DMA_CH_VALID, \ ++ [2] = (x) | DMA_CH_VALID, \ ++ [3] = (x) | DMA_CH_VALID, \ ++ [4] = (x) | DMA_CH_VALID, \ ++ [5] = (x) | DMA_CH_VALID, \ ++ [6] = (x) | DMA_CH_VALID, \ ++ [7] = (x) | DMA_CH_VALID, \ ++ [8] = (x), \ ++ [9] = (x), \ ++ [10] = (x), \ ++ [11] = (x), \ ++ [12] = (x), \ ++ [13] = (x), \ ++ [14] = (x), \ ++ [15] = (x), \ ++ [16] = (x), \ ++ [17] = (x), \ ++ [18] = (x), \ ++ [19] = (x), \ ++ [20] = (x), \ ++ [21] = (x), \ ++ [22] = (x), \ ++ [23] = (x), \ ++ [24] = (x), \ ++ [25] = (x), \ ++ [26] = (x), \ ++ [27] = (x), \ ++ [28] = (x), \ ++ [29] = (x), \ ++ [30] = (x), \ ++ [31] = (x), \ ++ } ++ ++/* DMAC-1 */ ++#define MAP1(x) { \ ++ [0] = (x), \ ++ [1] = (x), \ ++ [2] = (x), \ ++ [3] = (x), \ ++ [4] = (x), \ ++ [5] = (x), \ ++ [6] = (x), \ ++ [7] = (x), \ ++ [8] = (x) | DMA_CH_VALID, \ ++ [9] = (x) | DMA_CH_VALID, \ ++ [10] = (x) | DMA_CH_VALID, \ ++ [11] = (x) | DMA_CH_VALID, \ ++ [12] = (x) | DMA_CH_VALID, \ ++ [13] = (x) | DMA_CH_VALID, \ ++ [14] = (x) | DMA_CH_VALID, \ ++ [15] = (x) | DMA_CH_VALID, \ ++ [16] = (x), \ ++ [17] = (x), \ ++ [18] = (x), \ ++ [19] = (x), \ ++ [20] = (x), \ ++ [21] = (x), \ ++ [22] = (x), \ ++ [23] = (x), \ ++ [24] = (x), \ ++ [25] = (x), \ ++ [26] = (x), \ ++ [27] = (x), \ ++ [28] = (x), \ ++ [29] = (x), \ ++ [30] = (x), \ ++ [31] = (x), \ ++ } ++ ++/* SDMAC-0 */ ++#define MAP2(x) { \ ++ [0] = (x), \ ++ [1] = (x), \ ++ [2] = (x), \ ++ [3] = (x), \ ++ [4] = (x), \ ++ [5] = (x), \ ++ [6] = (x), \ ++ [7] = (x), \ ++ [8] = (x), \ ++ [9] = (x), \ ++ [10] = (x), \ ++ [11] = (x), \ ++ [12] = (x), \ ++ [13] = (x), \ ++ [14] = (x), \ ++ [15] = (x), \ ++ [16] = (x) | DMA_CH_VALID, \ ++ [17] = (x) | DMA_CH_VALID, \ ++ [18] = (x) | DMA_CH_VALID, \ ++ [19] = (x) | DMA_CH_VALID, \ ++ [20] = (x) | DMA_CH_VALID, \ ++ [21] = (x) | DMA_CH_VALID, \ ++ [22] = (x) | DMA_CH_VALID, \ ++ [23] = (x) | DMA_CH_VALID, \ ++ [24] = (x), \ ++ [25] = (x), \ ++ [26] = (x), \ ++ [27] = (x), \ ++ [28] = (x), \ ++ [29] = (x), \ ++ [30] = (x), \ ++ [31] = (x), \ ++ } ++ ++/* SDMAC-1 */ ++#define MAP3(x) { \ ++ [0] = (x), \ ++ [1] = (x), \ ++ [2] = (x), \ ++ [3] = (x), \ ++ [4] = (x), \ ++ [5] = (x), \ ++ [6] = (x), \ ++ [7] = (x), \ ++ [8] = (x), \ ++ [9] = (x), \ ++ [10] = (x), \ ++ [11] = (x), \ ++ [12] = (x), \ ++ [13] = (x), \ ++ [14] = (x), \ ++ [15] = (x), \ ++ [16] = (x), \ ++ [17] = (x), \ ++ [18] = (x), \ ++ [19] = (x), \ ++ [20] = (x), \ ++ [21] = (x), \ ++ [22] = (x), \ ++ [23] = (x), \ ++ [24] = (x) | DMA_CH_VALID, \ ++ [25] = (x) | DMA_CH_VALID, \ ++ [26] = (x) | DMA_CH_VALID, \ ++ [27] = (x) | DMA_CH_VALID, \ ++ [28] = (x) | DMA_CH_VALID, \ ++ [29] = (x) | DMA_CH_VALID, \ ++ [30] = (x) | DMA_CH_VALID, \ ++ [31] = (x) | DMA_CH_VALID, \ ++ } ++ ++/* SDMAC-0 */ ++#define MAP2_ONENAND(x) { \ ++ [0] = (x), \ ++ [1] = (x), \ ++ [2] = (x), \ ++ [3] = (x) , \ ++ [4] = (x), \ ++ [5] = (x), \ ++ [6] = (x), \ ++ [7] = (x), \ ++ [8] = (x), \ ++ [9] = (x), \ ++ [10] = (x), \ ++ [11] = (x), \ ++ [12] = (x), \ ++ [13] = (x), \ ++ [14] = (x), \ ++ [15] = (x), \ ++ [16] = (x), \ ++ [17] = (x), \ ++ [18] = (x) , \ ++ [19] = (x) | DMA_CH_VALID, \ ++ [20] = (x), \ ++ [21] = (x), \ ++ [22] = (x), \ ++ [23] = (x), \ ++ [24] = (x), \ ++ [25] = (x), \ ++ [26] = (x), \ ++ [27] = (x), \ ++ [28] = (x), \ ++ [29] = (x), \ ++ [30] = (x), \ ++ [31] = (x), \ ++ } ++ ++ ++/* DMAC0 DMA request sources */ ++#define S3C_DMA0_UART0CH0 0 ++#define S3C_DMA0_UART0CH1 1 ++#define S3C_DMA0_UART1CH0 2 ++#define S3C_DMA0_UART1CH1 3 ++#define S3C_DMA0_ONENAND_RX 3 /* Memory to Memory DMA */ ++#define S3C_DMA0_UART2CH0 4 ++#define S3C_DMA0_UART2CH1 5 ++#define S3C_DMA0_UART3CH0 6 ++#define S3C_DMA0_UART3CH1 7 ++#define S3C_DMA0_PCM0_TX 8 ++#define S3C_DMA0_PCM0_RX 9 ++#define S3C_DMA0_I2S0_TX 10 ++#define S3C_DMA0_I2S0_RX 11 ++#define S3C_DMA0_SPI0_TX 12 ++#define S3C_DMA0_SPI0_RX 13 ++#define S3C_DMA0_HSI_TX 14 ++#define S3C_DMA0_HSI_RX 15 ++ ++/* DMAC1 DMA request sources */ ++#define S3C_DMA1_PCM1_TX 0 ++#define S3C_DMA1_PCM1_RX 1 ++#define S3C_DMA1_I2S1_TX 2 ++#define S3C_DMA1_I2S1_RX 3 ++#define S3C_DMA1_SPI1_TX 4 ++#define S3C_DMA1_SPI1_RX 5 ++#define S3C_DMA1_AC97_PCMOUT 6 ++#define S3C_DMA1_AC97_PCMIN 7 ++#define S3C_DMA1_AC97_MICIN 8 ++#define S3C_DMA1_PWM 9 ++#define S3C_DMA1_IRDA 10 ++#define S3C_DMA1_EXT 11 ++ ++ ++static struct s3c_dma_map __initdata s3c6410_dma_mappings[] = { ++ ++ [DMACH_I2S_IN] = { ++ .name = "i2s0-in", ++ .channels = MAP0(S3C_DMA0_I2S0_RX), ++ .hw_addr.from = S3C_DMA0_I2S0_RX, ++ .sdma_sel = 1 << S3C_DMA0_I2S0_RX, ++ }, ++ [DMACH_I2S_OUT] = { ++ .name = "i2s0-out", ++ .channels = MAP0(S3C_DMA0_I2S0_TX), ++ .hw_addr.to = S3C_DMA0_I2S0_TX, ++ .sdma_sel = 1 << S3C_DMA0_I2S0_TX, ++ }, ++ [DMACH_I2S1_IN] = { ++ .name = "i2s1-in", ++ .channels = MAP1(S3C_DMA1_I2S1_RX), ++ .hw_addr.from = S3C_DMA1_I2S1_RX, ++ .sdma_sel = 1 << (S3C_DMA1_I2S1_RX+S3C_DMA1), ++ }, ++ [DMACH_I2S1_OUT] = { ++ .name = "i2s1-out", ++ .channels = MAP1(S3C_DMA1_I2S1_TX), ++ .hw_addr.to = S3C_DMA1_I2S1_TX, ++ .sdma_sel = 1 << (S3C_DMA1_I2S1_TX+S3C_DMA1), ++ }, ++ [DMACH_SPI0_IN] = { ++ .name = "spi0-in", ++ .channels = MAP0(S3C_DMA0_SPI0_RX), ++ .hw_addr.from = S3C_DMA0_SPI0_RX, ++ .sdma_sel = 1 << S3C_DMA0_SPI0_RX, ++ }, ++ [DMACH_SPI0_OUT] = { ++ .name = "spi0-out", ++ .channels = MAP0(S3C_DMA0_SPI0_TX), ++ .hw_addr.to = S3C_DMA0_SPI0_TX, ++ .sdma_sel = 1 << S3C_DMA0_SPI0_TX, ++ }, ++ [DMACH_SPI1_IN] = { ++ .name = "spi1-in", ++ .channels = MAP1(S3C_DMA1_SPI1_RX), ++ .hw_addr.from = S3C_DMA1_SPI1_RX, ++ .sdma_sel = 1 << (S3C_DMA1_SPI1_RX+S3C_DMA1), ++ }, ++ [DMACH_SPI1_OUT] = { ++ .name = "spi1-out", ++ .channels = MAP1(S3C_DMA1_SPI1_TX), ++ .hw_addr.to = S3C_DMA1_SPI1_TX, ++ .sdma_sel = 1 << (S3C_DMA1_SPI1_TX+S3C_DMA1), ++ }, ++ [DMACH_AC97_PCM_OUT] = { ++ .name = "ac97-pcm-out", ++ .channels = MAP1(S3C_DMA1_AC97_PCMOUT), ++ .hw_addr.to = S3C_DMA1_AC97_PCMOUT, ++ .sdma_sel = 1 << (S3C_DMA1_AC97_PCMOUT+S3C_DMA1), ++ }, ++ [DMACH_AC97_PCM_IN] = { ++ .name = "ac97-pcm-in", ++ .channels = MAP1(S3C_DMA1_AC97_PCMIN), ++ .hw_addr.from = S3C_DMA1_AC97_PCMIN, ++ .sdma_sel = 1 << (S3C_DMA1_AC97_PCMIN+S3C_DMA1), ++ }, ++ [DMACH_AC97_MIC_IN] = { ++ .name = "ac97-mic-in", ++ .channels = MAP1(S3C_DMA1_AC97_MICIN), ++ .hw_addr.from = S3C_DMA1_AC97_MICIN, ++ .sdma_sel = 1 << (S3C_DMA1_AC97_MICIN+S3C_DMA1), ++ }, ++ [DMACH_ONENAND_IN] = { ++ .name = "onenand-in", ++ .channels = MAP2_ONENAND(S3C_DMA0_ONENAND_RX), ++ .hw_addr.from = S3C_DMA0_ONENAND_RX, ++ }, ++ [DMACH_3D_M2M] = { ++ .name = "3D-M2M", ++ .channels = MAP1(S3C_DMA1_EXT), ++ .hw_addr.from = S3C_DMA1_EXT, ++ }, ++ [DMACH_I2S_V40_IN] = { ++ .name = "i2s-v40-in", ++ .channels = MAP0(S3C_DMA0_HSI_RX), ++ .hw_addr.from = S3C_DMA0_HSI_RX, ++ .sdma_sel = 1 << S3C_DMA0_HSI_RX, ++ }, ++ [DMACH_I2S_V40_OUT] = { ++ .name = "i2s-v40-out", ++ .channels = MAP0(S3C_DMA0_HSI_TX), ++ .hw_addr.to = S3C_DMA0_HSI_TX, ++ .sdma_sel = 1 << S3C_DMA0_HSI_TX, ++ }, ++}; ++ ++static void s3c6410_dma_select(struct s3c2410_dma_chan *chan, ++ struct s3c_dma_map *map) ++{ ++ chan->map = map; ++} ++ ++static struct s3c_dma_selection __initdata s3c6410_dma_sel = { ++ .select = s3c6410_dma_select, ++ .dcon_mask = 0, ++ .map = s3c6410_dma_mappings, ++ .map_size = ARRAY_SIZE(s3c6410_dma_mappings), ++}; ++ ++static int __init s3c6410_dma_add(struct sys_device *sysdev) ++{ ++ s3c_dma_init(S3C_DMA_CHANNELS, IRQ_DMA0, 0x20); ++ return s3c_dma_init_map(&s3c6410_dma_sel); ++} ++ ++static struct sysdev_driver s3c6410_dma_driver = { ++ .add = s3c6410_dma_add, ++}; ++ ++static int __init s3c6410_dma_init(void) ++{ ++ return sysdev_driver_register(&s3c6410_sysclass, &s3c6410_dma_driver); ++} ++ ++arch_initcall(s3c6410_dma_init); ++ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/irq.c linux-2.6.28.6/arch/arm/mach-s3c6410/irq.c +--- linux-2.6.28/arch/arm/mach-s3c6410/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/irq.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,47 @@ ++/* linux/arch/arm/mach-s3c6410/irq.c ++ * ++ * Copyright (c) 2006 Simtec Electronics ++ * Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static int s3c6410_irq_add(struct sys_device *sysdev) ++{ ++ return 0; ++} ++ ++static struct sysdev_driver s3c6410_irq_driver = { ++ .add = s3c6410_irq_add, ++ .suspend = s3c64xx_irq_suspend, ++ .resume = s3c64xx_irq_resume, ++}; ++ ++static int s3c6410_irq_init(void) ++{ ++ return sysdev_driver_register(&s3c6410_sysclass, &s3c6410_irq_driver); ++} ++ ++arch_initcall(s3c6410_irq_init); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/mach-smdk6410.c linux-2.6.28.6/arch/arm/mach-s3c6410/mach-smdk6410.c +--- linux-2.6.28/arch/arm/mach-s3c6410/mach-smdk6410.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/mach-smdk6410.c 2010-07-20 05:04:29.000000000 +0200 +@@ -0,0 +1,524 @@ ++/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++ ++ ++ ++ ++ ++#ifdef CONFIG_USB_SUPPORT ++#include ++#include ++ ++/* S3C_USB_CLKSRC 0: EPLL 1: CLK_48M */ ++#define S3C_USB_CLKSRC 1 ++ ++#ifdef USB_HOST_PORT2_EN ++#define OTGH_PHY_CLK_VALUE (0x60) /* Serial Interface, otg_phy input clk 48Mhz Oscillator */ ++#else ++//#define OTGH_PHY_CLK_VALUE (0x20) /* UTMI Interface, otg_phy input clk 48Mhz Oscillator */ ++#define OTGH_PHY_CLK_VALUE (0x0) ++ ++#endif ++#endif ++ ++#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK ++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB ++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE ++ ++extern struct sys_timer s3c_timer; ++extern void s3c64xx_reserve_bootmem(void); ++ ++//static struct samspi_device spidev_b0_cs0; ++#if 0 ++static struct samspi_device ProtocolADriver_b1_cs0; ++static struct samspi_device spidev_b0_cs1; ++static struct samspi_device ProtocolBDriver_b1_cs1; ++static struct samspi_device spidev_b1_cs2; ++#endif ++ ++static struct spi_board_info __initdata sam_spi_devs[] = { ++ [0] = { ++ .modalias = "spidev", /* Test Interface */ ++ .mode = SPI_MODE_2, /* CPOL=1, CPHA=0 */ ++ .max_speed_hz = 2468013, ++ /* Connected to SPI-0 as 1st Slave */ ++ .bus_num = 0, ++ .irq = IRQ_SPI0, ++ .chip_select = 0, ++// .controller_data = (void *)&spidev_b0_cs0, ++#if 0 ++ }, { ++ .modalias = "ProtocolADriver", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 1357923, ++ /* Connected to SPI-1 as 1st Slave */ ++ .bus_num = 1, ++ .irq = IRQ_SPI1, ++ .chip_select = 0, ++ .controller_data = (void *)&ProtocolADriver_b1_cs0, ++ }, { ++ .modalias = "spidev", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 2357923, ++ /* Connected to SPI-0 as 2nd Slave */ ++ .bus_num = 0, ++ .irq = IRQ_SPI0, ++ .chip_select = 1, ++ .controller_data = (void *)&spidev_b0_cs1, ++ }, { ++ .modalias = "ProtocolBDriver", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 3357923, ++ /* Connected to SPI-1 as 2ndst Slave */ ++ .bus_num = 1, ++ .irq = IRQ_SPI1, ++ .chip_select = 1, ++ .controller_data = (void *)&ProtocolBDriver_b1_cs1, ++ }, { ++ .modalias = "spidev", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 4357923, ++ /* Connected to SPI-1 as 3rd Slave */ ++ .bus_num = 1, ++ .irq = IRQ_SPI1, ++ .chip_select = 2, ++ .controller_data = (void *)&spidev_b1_cs2, ++#endif ++ }, ++}; ++ ++static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = { ++ [0] = { ++ .hwport = 0, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++ [1] = { ++ .hwport = 1, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++ [2] = { ++ .hwport = 2, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++ [3] = { ++ .hwport = 3, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++}; ++ ++struct map_desc smdk6410_iodesc[] = { ++ { ++ .virtual = (u32)S3C64XX_VA_DM9000, ++ .pfn = __phys_to_pfn(S3C64XX_PA_DM9000), ++ .length = S3C64XX_SZ_DM9000, ++ .type = MT_DEVICE, ++ }, ++}; ++ ++static struct platform_device *smdk6410_devices[] __initdata = { ++#ifdef CONFIG_SMDK6410_SD_CH0 ++ &s3c_device_hsmmc0, ++#endif ++#ifdef CONFIG_SMDK6410_SD_CH1 ++ &s3c_device_hsmmc1, ++#endif ++#ifdef CONFIG_SMDK6410_SD_CH2 ++ &s3c_device_hsmmc2, ++#endif ++ &s3c_device_wdt, ++ &s3c_device_rtc, ++ &s3c_device_i2c0, ++ //&s3c_device_i2c1, ++ &s3c_device_spi0, ++ &s3c_device_spi1, ++ &s3c_device_keypad, ++#if defined(CONFIG_TOUCHSCREEN_S3C) ++ &s3c_device_ts, ++#endif ++ &s3c_device_dm9000, ++ &s3c_device_lcd, ++ &s3c_device_vpp, ++ &s3c_device_mfc, ++ &s3c_device_tvenc, ++ &s3c_device_tvscaler, ++ &s3c_device_rotator, ++ &s3c_device_jpeg, ++ &s3c_device_nand, ++ &s3c_device_onenand, ++ &s3c_device_usb, ++ &s3c_device_usbgadget, ++ &s3c_device_usb_otghcd, ++ &s3c_device_fimc0, ++ &s3c_device_fimc1, ++ &s3c_device_g2d, ++ &s3c_device_g3d, ++ ++#ifdef CONFIG_S3C64XX_ADC ++ &s3c_device_adc, ++#endif ++ ++#ifdef CONFIG_HAVE_PWM ++ &s3c_device_timer[0], ++ &s3c_device_timer[1], ++#endif ++}; ++ ++static struct i2c_board_info i2c_devs0[] __initdata = { ++ { I2C_BOARD_INFO("24c08", 0x50), }, ++/* { I2C_BOARD_INFO("WM8580", 0x1b), }, */ ++}; ++ ++static struct i2c_board_info i2c_devs1[] __initdata = { ++ { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ ++ { I2C_BOARD_INFO("WM8580", 0x1b), }, ++}; ++ ++static struct s3c_ts_mach_info s3c_ts_platform __initdata = { ++ .delay = 0xFFFF, ++ .presc = 0xFF, ++ .oversampling_shift = 2, ++ .resol_bit = 12, ++ .s3c_adc_con = ADC_TYPE_2, ++}; ++ ++static struct s3c_adc_mach_info s3c_adc_platform = { ++ /* s3c6410 support 12-bit resolution */ ++ .delay = 10000, ++ .presc = 49, ++ .resolution = 12, ++}; ++ ++#if defined(CONFIG_HAVE_PWM) ++static struct platform_pwm_backlight_data smdk_backlight_data = { ++ .pwm_id = 1, ++ .max_brightness = 255, ++ .dft_brightness = 255, ++ .pwm_period_ns = 78770, ++}; ++ ++static struct platform_device smdk_backlight_device = { ++ .name = "pwm-backlight", ++ .dev = { ++ .parent = &s3c_device_timer[1].dev, ++ .platform_data = &smdk_backlight_data, ++ }, ++}; ++ ++static void __init smdk_backlight_register(void) ++{ ++ int ret = platform_device_register(&smdk_backlight_device); ++ if (ret) ++ printk(KERN_ERR "smdk: failed to register backlight device: %d\n", ret); ++} ++#else ++#define smdk_backlight_register() do { } while (0) ++#endif ++ ++static void __init smdk6410_map_io(void) ++{ ++ s3c_device_nand.name = "s3c6410-nand"; ++ ++ s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); ++ s3c24xx_init_clocks(12000000); ++ s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); ++ s3c64xx_reserve_bootmem(); ++} ++ ++static void __init smdk6410_smc911x_set(void) ++{ ++ unsigned int tmp; ++ ++ tmp = __raw_readl(S3C64XX_SROM_BW); ++ tmp &= ~(S3C64XX_SROM_BW_WAIT_ENABLE1_MASK | S3C64XX_SROM_BW_WAIT_ENABLE1_MASK | ++ S3C64XX_SROM_BW_DATA_WIDTH1_MASK); ++ tmp |= S3C64XX_SROM_BW_BYTE_ENABLE1_ENABLE | S3C64XX_SROM_BW_WAIT_ENABLE1_ENABLE | ++ S3C64XX_SROM_BW_DATA_WIDTH1_16BIT; ++ ++ __raw_writel(tmp, S3C64XX_SROM_BW); ++ ++ __raw_writel(S3C64XX_SROM_BCn_TACS(0) | S3C64XX_SROM_BCn_TCOS(4) | ++ S3C64XX_SROM_BCn_TACC(13) | S3C64XX_SROM_BCn_TCOH(1) | ++ S3C64XX_SROM_BCn_TCAH(4) | S3C64XX_SROM_BCn_TACP(6) | ++ S3C64XX_SROM_BCn_PMC_NORMAL, S3C64XX_SROM_BC1); ++} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++static void __init smdk6410_machine_init(void) ++{ ++ unsigned int tmp; ++ ++ s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info; ++ s3c_device_onenand.dev.platform_data = &s3c_onenand_data; ++ ++ ++ s3c_i2c0_set_platdata(NULL); ++ ++#if defined(CONFIG_TOUCHSCREEN_S3C) ++ s3c_ts_set_platdata(&s3c_ts_platform); ++#endif ++ s3c_adc_set_platdata(&s3c_adc_platform); ++ ++ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); ++ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); ++ ++ spi_register_board_info(sam_spi_devs, ARRAY_SIZE(sam_spi_devs)); ++ ++ s3c_fimc0_set_platdata(NULL); ++ s3c_fimc1_set_platdata(NULL); ++ ++#ifdef CONFIG_VIDEO_FIMC ++ //s3c_fimc_reset_camera(); ++#endif ++ ++ platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices)); ++ s3c6410_pm_init(); ++ ++ smdk_backlight_register(); ++ ++} ++ ++MACHINE_START(SMDK6410, "SMDK6410") ++ /* Maintainer: Ben Dooks */ ++ .phys_io = S3C_PA_UART & 0xfff00000, ++ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, ++ .boot_params = S3C64XX_PA_SDRAM + 0x100, ++ ++ .init_irq = s3c6410_init_irq, ++ .map_io = smdk6410_map_io, ++ .init_machine = smdk6410_machine_init, ++ .timer = &s3c64xx_timer, ++MACHINE_END ++ ++#ifdef CONFIG_USB_SUPPORT ++/* Initializes OTG Phy. */ ++void otg_phy_init(void) { ++ ++ writel(readl(S3C_OTHERS)|S3C_OTHERS_USB_SIG_MASK, S3C_OTHERS); ++ writel(0x0, S3C_USBOTG_PHYPWR); /* Power up */ ++ writel(OTGH_PHY_CLK_VALUE, S3C_USBOTG_PHYCLK); ++ writel(0x1, S3C_USBOTG_RSTCON); ++ ++ udelay(50); ++ writel(0x0, S3C_USBOTG_RSTCON); ++ udelay(50); ++} ++EXPORT_SYMBOL(otg_phy_init); ++ ++/* USB Control request data struct must be located here for DMA transfer */ ++struct usb_ctrlrequest usb_ctrl __attribute__((aligned(8))); ++EXPORT_SYMBOL(usb_ctrl); ++ ++/* OTG PHY Power Off */ ++void otg_phy_off(void) { ++ writel(readl(S3C_USBOTG_PHYPWR)|(0x1F<<1), S3C_USBOTG_PHYPWR); ++ writel(readl(S3C_OTHERS)&~S3C_OTHERS_USB_SIG_MASK, S3C_OTHERS); ++} ++EXPORT_SYMBOL(otg_phy_off); ++ ++void usb_host_clk_en(void) { ++ struct clk *otg_clk; ++ ++ switch (S3C_USB_CLKSRC) { ++ case 0: /* epll clk */ ++ writel((readl(S3C_CLK_SRC)& ~S3C6400_CLKSRC_UHOST_MASK) ++ |S3C_CLKSRC_EPLL_CLKSEL|S3C_CLKSRC_UHOST_EPLL, ++ S3C_CLK_SRC); ++ ++ /* USB host colock divider ratio is 2 */ ++ writel((readl(S3C_CLK_DIV1)& ~S3C6400_CLKDIV1_UHOST_MASK) ++ |(1<<20), S3C_CLK_DIV1); ++ break; ++ case 1: /* oscillator 48M clk */ ++ otg_clk = clk_get(NULL, "otg"); ++ clk_enable(otg_clk); ++ writel(readl(S3C_CLK_SRC)& ~S3C6400_CLKSRC_UHOST_MASK, S3C_CLK_SRC); ++ otg_phy_init(); ++ ++ /* USB host colock divider ratio is 1 */ ++ writel(readl(S3C_CLK_DIV1)& ~S3C6400_CLKDIV1_UHOST_MASK, S3C_CLK_DIV1); ++ break; ++ default: ++ printk(KERN_INFO "Unknown USB Host Clock Source\n"); ++ BUG(); ++ break; ++ } ++ ++ writel(readl(S3C_HCLK_GATE)|S3C_CLKCON_HCLK_UHOST|S3C_CLKCON_HCLK_SECUR, ++ S3C_HCLK_GATE); ++ writel(readl(S3C_SCLK_GATE)|S3C_CLKCON_SCLK_UHOST, S3C_SCLK_GATE); ++ ++} ++ ++EXPORT_SYMBOL(usb_host_clk_en); ++#endif ++ ++#if defined(CONFIG_RTC_DRV_S3C) ++/* RTC common Function for samsung APs*/ ++unsigned int s3c_rtc_set_bit_byte(void __iomem *base, uint offset, uint val) ++{ ++ writeb(val, base + offset); ++ ++ return 0; ++} ++ ++unsigned int s3c_rtc_read_alarm_status(void __iomem *base) ++{ ++ return 1; ++} ++ ++void s3c_rtc_set_pie(void __iomem *base, uint to) ++{ ++ unsigned int tmp; ++ ++ tmp = readw(base + S3C2410_RTCCON) & ~S3C_RTCCON_TICEN; ++ ++ if (to) ++ tmp |= S3C_RTCCON_TICEN; ++ ++ writew(tmp, base + S3C2410_RTCCON); ++} ++ ++void s3c_rtc_set_freq_regs(void __iomem *base, uint freq, uint s3c_freq) ++{ ++ unsigned int tmp; ++ ++ tmp = readw(base + S3C2410_RTCCON) & (S3C_RTCCON_TICEN | S3C2410_RTCCON_RTCEN ); ++ writew(tmp, base + S3C2410_RTCCON); ++ s3c_freq = freq; ++ tmp = (32768 / freq)-1; ++ writel(tmp, base + S3C2410_TICNT); ++} ++ ++void s3c_rtc_enable_set(struct platform_device *pdev,void __iomem *base, int en) ++{ ++ unsigned int tmp; ++ ++ if (!en) { ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp & ~ (S3C2410_RTCCON_RTCEN | S3C_RTCCON_TICEN), base + S3C2410_RTCCON); ++ } else { ++ /* re-enable the device, and check it is ok */ ++ if ((readw(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){ ++ dev_info(&pdev->dev, "rtc disabled, re-enabling\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON); ++ } ++ ++ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){ ++ dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON); ++ } ++ ++ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){ ++ dev_info(&pdev->dev, "removing RTCCON_CLKRST\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON); ++ } ++ } ++} ++#endif ++ ++#if defined(CONFIG_KEYPAD_S3C) || defined (CONFIG_KEYPAD_S3C_MODULE) ++void s3c_setup_keypad_cfg_gpio(int rows, int columns) ++{ ++ unsigned int gpio; ++ unsigned int end; ++} ++ ++EXPORT_SYMBOL(s3c_setup_keypad_cfg_gpio); ++#endif ++ ++#ifdef CONFIG_MMC_SDHCI_S3C ++void s3c_setup_hsmmc_clock(void) ++{ ++ struct clk *clk; ++ ++ clk = clk_get(NULL, "mmc_bus"); ++} ++EXPORT_SYMBOL(s3c_setup_hsmmc_clock); ++#endif ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/pm.c linux-2.6.28.6/arch/arm/mach-s3c6410/pm.c +--- linux-2.6.28/arch/arm/mach-s3c6410/pm.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/pm.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,103 @@ ++/* linux/arch/arm/mach-s3c6410/pm.c ++ * ++ * Copyright (c) 2006 Samsung Electronics ++ * ++ * ++ * S3C6410 (and compatible) Power Manager (Suspend-To-RAM) support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++ ++#include ++#include ++//#include ++#include ++#include ++ ++#ifdef CONFIG_S3C2410_PM_DEBUG ++extern void pm_dbg(const char *fmt, ...); ++#define DBG(fmt...) pm_dbg(fmt) ++#else ++#define DBG(fmt...) printk(KERN_DEBUG fmt) ++#endif ++ ++//static void s3c6410_cpu_suspend(void) ++void s3c6410_cpu_suspend(void) ++{ ++ unsigned long tmp; ++ ++ /* issue the standby signal into the pm unit. Note, we ++ * issue a write-buffer drain just in case */ ++ ++ tmp = 0; ++ ++ asm("b 1f\n\t" ++ ".align 5\n\t" ++ "1:\n\t" ++ "mcr p15, 0, %0, c7, c10, 5\n\t" ++ "mcr p15, 0, %0, c7, c10, 4\n\t" ++ "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); ++ ++ /* we should never get past here */ ++ ++ panic("sleep resumed to originator?"); ++} ++ ++static void s3c6410_pm_prepare(void) ++{ ++ ++} ++ ++static int s3c6410_pm_add(struct sys_device *sysdev) ++{ ++ pm_cpu_prep = s3c6410_pm_prepare; ++ pm_cpu_sleep = s3c6410_cpu_suspend; ++ ++ return 0; ++} ++ ++static struct sleep_save s3c6410_sleep[] = { ++ ++}; ++ ++static int s3c6410_pm_resume(struct sys_device *dev) ++{ ++ s3c6410_pm_do_restore(s3c6410_sleep, ARRAY_SIZE(s3c6410_sleep)); ++ return 0; ++} ++ ++static struct sysdev_driver s3c6410_pm_driver = { ++ .add = s3c6410_pm_add, ++ .resume = s3c6410_pm_resume, ++}; ++ ++static __init int s3c6410_pm_drvinit(void) ++{ ++ return sysdev_driver_register(&s3c6410_sysclass, &s3c6410_pm_driver); ++} ++ ++arch_initcall(s3c6410_pm_drvinit); ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s3c6410/setup-sdhci.c linux-2.6.28.6/arch/arm/mach-s3c6410/setup-sdhci.c +--- linux-2.6.28/arch/arm/mach-s3c6410/setup-sdhci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s3c6410/setup-sdhci.c 2010-04-21 06:34:54.000000000 +0200 +@@ -0,0 +1,119 @@ ++/* linux/arch/arm/mach-s3c6410/setup-sdhci.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ ++ ++char *s3c6410_hsmmc_clksrcs[4] = { ++ [0] = "hsmmc", ++ [1] = "hsmmc", ++ [2] = "mmc_bus", ++ /* [3] = "48m", - note not succesfully used yet */ ++}; ++ ++void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ end = S3C64XX_GPG(2 + width); ++ ++ /* Set all the necessary GPG pins to special-function 0 */ ++ for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2)); ++} ++ ++void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, ++ void __iomem *r, ++ struct mmc_ios *ios, ++ struct mmc_card *card) ++{ ++ u32 ctrl2, ctrl3 = 0; ++ ++ /* don't need to alter anything acording to card-type */ ++ ++ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); ++ ++ /* finally, we don't need to add delay values in HS-MMC interface. ++ * all delay values are removed. by scsuh. ++ */ ++ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); ++ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; ++ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | ++ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | ++ S3C_SDHCI_CTRL2_DFCNT_NONE | ++ S3C_SDHCI_CTRL2_ENCLKOUTHOLD); ++ ++ writel(ctrl2, r + S3C_SDHCI_CONTROL2); ++ writel(ctrl3, r + S3C_SDHCI_CONTROL3); ++} ++ ++void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ end = S3C64XX_GPH(2 + width); ++ ++ /* Set all the necessary GPG pins to special-function 0 */ ++ for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ s3c_gpio_setpull(S3C64XX_GPN(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S3C64XX_GPN(6), S3C_GPIO_SFN(3)); ++ ++ ++} ++ ++void s3c6410_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* CMD */ ++ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(3)); ++ s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_NONE); ++ ++ /* CLK */ ++ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(3)); ++ s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_NONE); ++ ++ end = S3C64XX_GPH(6+width); ++ ++ /* Set all the necessary GPG pins to special-function 0 */ ++ for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++} ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/Kconfig linux-2.6.28.6/arch/arm/mach-s5p6440/Kconfig +--- linux-2.6.28/arch/arm/mach-s5p6440/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,70 @@ ++# arch/arm/mach-s5p6440/Kconfig ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++# Configuration options for the S5P6440 CPU ++ ++config CPU_S5P6440 ++ bool ++ select CPU_S5P6440_INIT ++ select CPU_S5P6440_CLOCK ++ help ++ Enable S5P6440 CPU support ++ ++config S5P6440_SETUP_SDHCI ++ bool ++ help ++ Internal helper functions for S5P6440 based SDHCI systems ++ ++config MACH_SMDK6440 ++ bool "SMDK6440" ++ select CPU_S5P6440 ++ select S3C_DEV_HSMMC ++ select S3C_DEV_HSMMC1 ++ select S3C_DEV_HSMMC2 ++ select S3C_DEV_I2C1 ++ select S5P6440_SETUP_SDHCI ++ select S5P64XX_SETUP_I2C1 ++ select S3C_DMA_PL330 ++ help ++ Machine support for the Samsung SMDK6440 ++ ++# At least some of the SMDK6440s were shipped with the card detect ++# for the MMC/SD slots connected to the same input. This means that ++# either the boards need to be altered to have channel0 to an alternate ++# configuration or that only one slot can be used. ++ ++menu "SMDK6440 MMC/SD slot setup" ++ depends on MACH_SMDK6440 ++ ++config SMDK6440_SD_CH0 ++ bool "Use channel 0" ++ depends on MACH_SMDK6440 ++ help ++ Select CON7 (channel 0) as the MMC/SD slot, as ++ at least some SMDK6440 boards come with the ++ resistors fitted so that the card detects for ++ channels 0 and 1 are the same. ++ ++config SMDK6440_SD_CH1 ++ bool "Use channel 1" ++ depends on MACH_SMDK6440 ++ help ++ Select CON6 (channel 1) as the MMC/SD slot, as ++ at least some SMDK6440 boards come with the ++ resistors fitted so that the card detects for ++ channels 0 and 1 are the same. ++ ++config SMDK6440_SD_CH2 ++ bool "Use channel 2" ++ depends on MACH_SMDK6440 ++ help ++ Select CON6 (channel 1) as the MMC/SD slot, as ++ at least some SMDK6410 boards come with the ++ resistors fitted so that the card detects for ++ channels 0 and 1 are the same. ++ ++endmenu +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/Makefile linux-2.6.28.6/arch/arm/mach-s5p6440/Makefile +--- linux-2.6.28/arch/arm/mach-s5p6440/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,26 @@ ++# arch/arm/mach-s5p6440/Makefile ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++obj-y := ++obj-m := ++obj-n := ++obj- := ++ ++# Core support for S5P6440 system ++ ++obj-$(CONFIG_CPU_S5P6440) += cpu.o ++obj-$(CONFIG_CPU_S5P6440) += dma.o ++ ++# Helper and device support ++ ++obj-$(CONFIG_S5P6440_SETUP_SDHCI) += setup-sdhci.o ++ ++obj-$(CONFIG_PM) += pm.o ++ ++# machine support ++ ++obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/Makefile.boot linux-2.6.28.6/arch/arm/mach-s5p6440/Makefile.boot +--- linux-2.6.28/arch/arm/mach-s5p6440/Makefile.boot 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/Makefile.boot 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,2 @@ ++ zreladdr-y := 0x20008000 ++params_phys-y := 0x20000100 +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/cpu.c linux-2.6.28.6/arch/arm/mach-s5p6440/cpu.c +--- linux-2.6.28/arch/arm/mach-s5p6440/cpu.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/cpu.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,132 @@ ++/* linux/arch/arm/mach-s5p6440/cpu.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Initial IO mappings */ ++ ++static struct map_desc s5p6440_iodesc[] __initdata = { ++ IODESC_ENT(LCD), ++ IODESC_ENT(SROMC), ++ IODESC_ENT(HOSTIFB), ++ IODESC_ENT(OTG), ++ IODESC_ENT(OTGSFR), ++}; ++ ++static void s5p6440_idle(void) ++{ ++ unsigned long tmp; ++ ++ /* Ensure our idle mode is to go to idle */ ++ /* Set WFI instruction to SLEEP mode */ ++ ++ tmp = __raw_readl(S3C_PWR_CFG); ++ tmp &= ~(0x3<<5); ++ tmp |= (0x1<<5); ++ __raw_writel(tmp, S3C_PWR_CFG); ++ ++ cpu_do_idle(); ++} ++ ++/* s5p6440_map_io ++ * ++ * register the standard cpu IO areas ++*/ ++ ++void __init s5p6440_map_io(void) ++{ ++ iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); ++ ++ /* initialise device information early */ ++ s3c6410_default_sdhci0(); ++ s3c6410_default_sdhci1(); ++ s3c6410_default_sdhci2(); ++ ++ /* the i2c devices are directly compatible with s3c2440 */ ++ s3c_i2c0_setname("s3c2440-i2c"); ++ s3c_i2c1_setname("s3c2440-i2c"); ++ ++ /* set our idle function */ ++ s5p64xx_idle = s5p6440_idle; ++} ++ ++void __init s5p6440_init_clocks(int xtal) ++{ ++ printk(KERN_DEBUG "%s: initialising clocks\n", __func__); ++ s3c24xx_register_baseclocks(xtal); ++ s5p64xx_register_clocks(); ++ s5p6440_register_clocks(); ++ s5p6440_setup_clocks(); ++#ifdef CONFIG_HAVE_PWM ++ s3c24xx_pwmclk_init(); ++#endif ++} ++ ++void __init s5p6440_init_irq(void) ++{ ++ /* VIC0 is missing IRQ7, VIC1 is fully populated. */ ++ s5p64xx_init_irq(~0 & ~(1 << 7), ~0); ++} ++ ++struct sysdev_class s5p6440_sysclass = { ++ .name = "s5p6440-core", ++}; ++ ++static struct sys_device s5p6440_sysdev = { ++ .cls = &s5p6440_sysclass, ++}; ++ ++static int __init s5p6440_core_init(void) ++{ ++ return sysdev_class_register(&s5p6440_sysclass); ++} ++ ++core_initcall(s5p6440_core_init); ++ ++int __init s5p6440_init(void) ++{ ++ printk("S5P6440: Initialising architecture\n"); ++ ++ return sysdev_register(&s5p6440_sysdev); ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/dma.c linux-2.6.28.6/arch/arm/mach-s5p6440/dma.c +--- linux-2.6.28/arch/arm/mach-s5p6440/dma.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,155 @@ ++/* linux/arch/arm/mach-s5p6440/dma.c ++ * ++ * Copyright (c) 2003-2005,2006 Samsung Electronics ++ * ++ * S5P6440 DMA selection ++ * ++ * http://www.samsung.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++ ++/* DMAC */ ++#define MAP0(x) { \ ++ [0] = (x) | DMA_CH_VALID, \ ++ [1] = (x) | DMA_CH_VALID, \ ++ [2] = (x) | DMA_CH_VALID, \ ++ [3] = (x) | DMA_CH_VALID, \ ++ [4] = (x) | DMA_CH_VALID, \ ++ [5] = (x) | DMA_CH_VALID, \ ++ [6] = (x) | DMA_CH_VALID, \ ++ [7] = (x) | DMA_CH_VALID, \ ++ } ++ ++ ++/* DMA request sources */ ++#define S3C_DMA0_UART0CH0 0 ++#define S3C_DMA0_UART0CH1 1 ++#define S3C_DMA0_UART1CH0 2 ++#define S3C_DMA0_UART1CH1 3 ++#define S3C_DMA0_UART2CH0 4 ++#define S3C_DMA0_UART2CH1 5 ++#define S3C_DMA0_UART3CH0 6 ++#define S3C_DMA0_UART3CH1 7 ++#define S3C_DMA0_PCM0_TX 10 ++#define S3C_DMA0_PCM0_RX 11 ++#define S3C_DMA0_I2S0_TX 12 ++#define S3C_DMA0_I2S0_RX 13 ++#define S3C_DMA0_SPI0_TX 14 ++#define S3C_DMA0_SPI0_RX 15 ++#define S3C_DMA0_SPI1_TX 20 ++#define S3C_DMA0_SPI1_RX 21 ++#define S3C_DMA0_GPS 24 ++#define S3C_DMA0_PWM 29 ++#define S3C_DMA0_EXTERNAL 31 ++ ++#define S3C_DMA_M2M 0 ++ ++ ++static struct s3c_dma_map __initdata s5p6440_dma_mappings[] = { ++ ++ [DMACH_I2S_IN] = { ++ .name = "i2s0-in", ++ .channels = MAP0(S3C_DMA0_I2S0_RX), ++ .hw_addr.from = S3C_DMA0_I2S0_RX, ++ }, ++ [DMACH_I2S_OUT] = { ++ .name = "i2s0-out", ++ .channels = MAP0(S3C_DMA0_I2S0_TX), ++ .hw_addr.to = S3C_DMA0_I2S0_TX, ++ }, ++ [DMACH_SPI0_IN] = { ++ .name = "spi0-in", ++ .channels = MAP0(S3C_DMA0_SPI0_RX), ++ .hw_addr.from = S3C_DMA0_SPI0_RX, ++ }, ++ [DMACH_SPI0_OUT] = { ++ .name = "spi0-out", ++ .channels = MAP0(S3C_DMA0_SPI0_TX), ++ .hw_addr.to = S3C_DMA0_SPI0_TX, ++ }, ++ [DMACH_SPI1_IN] = { ++ .name = "spi1-in", ++ .channels = MAP0(S3C_DMA0_SPI1_RX), ++ .hw_addr.from = S3C_DMA0_SPI1_RX, ++ }, ++ [DMACH_SPI1_OUT] = { ++ .name = "spi1-out", ++ .channels = MAP0(S3C_DMA0_SPI1_TX), ++ .hw_addr.to = S3C_DMA0_SPI1_TX, ++ }, ++ [DMACH_AC97_PCM_OUT] = { ++ .name = "ac97-pcm-out", ++ .channels = MAP0(S3C_DMA0_PCM0_TX), ++ .hw_addr.to = S3C_DMA0_PCM0_TX, ++ }, ++ [DMACH_AC97_PCM_IN] = { ++ .name = "ac97-pcm-in", ++ .channels = MAP0(S3C_DMA0_PCM0_RX), ++ .hw_addr.from = S3C_DMA0_PCM0_RX, ++ }, ++ [DMACH_3D_M2M] = { ++ .name = "3D-M2M", ++ .channels = MAP0(S3C_DMA_M2M), ++ .hw_addr.from = 0, ++ }, ++ [DMACH_I2S_V40_IN] = { ++ .name = "i2s-v40-in", ++ .channels = MAP0(S3C_DMA0_I2S0_RX), ++ .hw_addr.from = S3C_DMA0_I2S0_RX, ++ .sdma_sel = 1 << S3C_DMA0_I2S0_RX, ++ }, ++ [DMACH_I2S_V40_OUT] = { ++ .name = "i2s-v40-out", ++ .channels = MAP0(S3C_DMA0_I2S0_TX), ++ .hw_addr.to = S3C_DMA0_I2S0_TX, ++ .sdma_sel = 1 << S3C_DMA0_I2S0_TX, ++ }, ++}; ++ ++static void s5p6440_dma_select(struct s3c2410_dma_chan *chan, ++ struct s3c_dma_map *map) ++{ ++ chan->map = map; ++} ++ ++static struct s3c_dma_selection __initdata s5p6440_dma_sel = { ++ .select = s5p6440_dma_select, ++ .dcon_mask = 0, ++ .map = s5p6440_dma_mappings, ++ .map_size = ARRAY_SIZE(s5p6440_dma_mappings), ++}; ++ ++static int __init s5p6440_dma_add(struct sys_device *sysdev) ++{ ++ s3c_dma_init(S3C_DMA_CHANNELS, IRQ_DMA0, 0x1000); ++ return s3c_dma_init_map(&s5p6440_dma_sel); ++} ++ ++static struct sysdev_driver s5p6440_dma_driver = { ++ .add = s5p6440_dma_add, ++}; ++ ++static int __init s5p6440_dma_init(void) ++{ ++ return sysdev_driver_register(&s5p6440_sysclass, &s5p6440_dma_driver); ++} ++ ++arch_initcall(s5p6440_dma_init); ++ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/debug-macro.S linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/debug-macro.S +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/debug-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/debug-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,39 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++/* pull in the relevant register and map files. */ ++ ++#include ++#include ++ ++ /* note, for the boot process to work we have to keep the UART ++ * virtual address aligned to an 1MiB boundary for the L1 ++ * mapping the head code makes. We keep the UART virtual address ++ * aligned and add in the offset when we load the value here. ++ */ ++ ++ .macro addruart, rx ++ mrc p15, 0, \rx, c1, c0 ++ tst \rx, #1 ++ ldreq \rx, = S3C_PA_UART ++ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) ++#if CONFIG_DEBUG_S3C_UART != 0 ++ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) ++#endif ++ .endm ++ ++/* include the reset of the code which will do the work, we're only ++ * compiling for a single cpu processor type so the default of s3c2440 ++ * will be fine with us. ++ */ ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/dma.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/dma.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/dma.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/dma.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/dma.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S5P6440 - DMA support ++ */ ++ ++#ifndef __ASM_ARCH_DMA_H ++#define __ASM_ARCH_DMA_H __FILE__ ++ ++#include ++ ++#define S3C_DMA_CONTROLLERS (1) ++#define S3C_CHANNELS_PER_DMA (8) ++#define S3C_CANDIDATE_CHANNELS_PER_DMA (32) ++#define S3C_DMA_CHANNELS (S3C_DMA_CONTROLLERS*S3C_CHANNELS_PER_DMA) ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/entry-macro.S linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/entry-macro.S +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/entry-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/entry-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,44 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * Low-level IRQ helper macros for the Samsung S5P64XX series ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++*/ ++ ++#include ++#include ++#include ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ ldr \base, =S3C_VA_VIC0 ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ ++ @ check the vic0 ++ mov \irqnr, # S3C_IRQ_OFFSET + 31 ++ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] ++ teq \irqstat, #0 ++ ++ @ otherwise try vic1 ++ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) ++ addeq \irqnr, \irqnr, #32 ++ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] ++ teqeq \irqstat, #0 ++ ++ clzne \irqstat, \irqstat ++ subne \irqnr, \irqnr, \irqstat ++ .endm +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/gpio-core.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/gpio-core.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/gpio-core.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/gpio-core.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/gpio-core.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S5P64XX - GPIO core support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_GPIO_CORE_H ++#define __ASM_ARCH_GPIO_CORE_H __FILE__ ++ ++/* currently we just include the platform support */ ++#include ++ ++#endif /* __ASM_ARCH_GPIO_CORE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/gpio.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/gpio.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/gpio.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,78 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C6400 - GPIO lib support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++#define gpio_cansleep __gpio_cansleep ++#define gpio_to_irq __gpio_to_irq ++ ++/* GPIO bank sizes */ ++#define S5P64XX_GPIO_A_NR (6) ++#define S5P64XX_GPIO_B_NR (7) ++#define S5P64XX_GPIO_C_NR (8) ++#define S5P64XX_GPIO_F_NR (16) ++#define S5P64XX_GPIO_G_NR (7) ++#define S5P64XX_GPIO_H_NR (10) ++#define S5P64XX_GPIO_I_NR (16) ++#define S5P64XX_GPIO_J_NR (12) ++#define S5P64XX_GPIO_N_NR (16) ++#define S5P64XX_GPIO_P_NR (11) ++#define S5P64XX_GPIO_R_NR (15) ++ ++/* GPIO bank numbes */ ++ ++/* CONFIG_S3C_GPIO_SPACE allows the user to select extra ++ * space for debugging purposes so that any accidental ++ * change from one gpio bank to another can be caught. ++*/ ++ ++#define S5P64XX_GPIO_NEXT(__gpio) \ ++ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) ++ ++enum s3c_gpio_number { ++ S5P64XX_GPIO_A_START = 0, ++ S5P64XX_GPIO_B_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_A), ++ S5P64XX_GPIO_C_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_B), ++ S5P64XX_GPIO_F_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_C), ++ S5P64XX_GPIO_G_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_F), ++ S5P64XX_GPIO_H_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_G), ++ S5P64XX_GPIO_I_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_H), ++ S5P64XX_GPIO_J_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_I), ++ S5P64XX_GPIO_N_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_J), ++ S5P64XX_GPIO_P_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_N), ++ S5P64XX_GPIO_R_START = S5P64XX_GPIO_NEXT(S5P64XX_GPIO_P), ++}; ++ ++/* S5P64XX GPIO number definitions. */ ++ ++#define S5P64XX_GPA(_nr) (S5P64XX_GPIO_A_START + (_nr)) ++#define S5P64XX_GPB(_nr) (S5P64XX_GPIO_B_START + (_nr)) ++#define S5P64XX_GPC(_nr) (S5P64XX_GPIO_C_START + (_nr)) ++#define S5P64XX_GPF(_nr) (S5P64XX_GPIO_F_START + (_nr)) ++#define S5P64XX_GPG(_nr) (S5P64XX_GPIO_G_START + (_nr)) ++#define S5P64XX_GPH(_nr) (S5P64XX_GPIO_H_START + (_nr)) ++#define S5P64XX_GPI(_nr) (S5P64XX_GPIO_I_START + (_nr)) ++#define S5P64XX_GPJ(_nr) (S5P64XX_GPIO_J_START + (_nr)) ++#define S5P64XX_GPN(_nr) (S5P64XX_GPIO_N_START + (_nr)) ++#define S5P64XX_GPP(_nr) (S5P64XX_GPIO_P_START + (_nr)) ++#define S5P64XX_GPR(_nr) (S5P64XX_GPIO_R_START + (_nr)) ++ ++/* the end of the S5P64XX specific gpios */ ++#define S5P64XX_GPIO_END (S5P64XX_GPR(S5P64XX_GPIO_R_NR) + 1) ++#define S3C_GPIO_END S5P64XX_GPIO_END ++ ++/* define the number of gpios we need to the one after the GPR() range */ ++#define ARCH_NR_GPIOS (S5P64XX_GPR(S5P64XX_GPIO_R_NR) + 1) ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/hardware.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/hardware.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/hardware.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/hardware.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - Hardware support ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H __FILE__ ++ ++/* currently nothing here, placeholder */ ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/idle.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/idle.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/idle.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/idle.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,24 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/idle.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C6400 CPU Idle controls ++*/ ++ ++#ifndef __ASM_ARCH_IDLE_H ++#define __ASM_ARCH_IDLE_H __FILE__ ++ ++/* This allows the over-ride of the default idle code, in case there ++ * is any other things to be done over idle (like DVS) ++*/ ++ ++extern void (*s5p64xx_idle)(void); ++ ++extern void s5p64xx_default_idle(void); ++ ++#endif /* __ASM_ARCH_IDLE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/irqs.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/irqs.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/irqs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/irqs.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,20 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - IRQ definitions ++ */ ++ ++#ifndef __ASM_ARCH_IRQS_H ++#define __ASM_ARCH_IRQS_H __FILE__ ++ ++#ifndef __ASM_ARM_IRQ_H ++#error "Do not include this directly, instead #include " ++#endif ++ ++#include ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/map.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/map.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/map.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/map.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,151 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/map.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5P64XX - Memory map definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_MAP_H ++#define __ASM_ARCH_MAP_H __FILE__ ++ ++#include ++ ++/* HSMMC units */ ++#define S5P64XX_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) ++#define S5P64XX_PA_HSMMC0 S5P64XX_PA_HSMMC(0) ++#define S5P64XX_PA_HSMMC1 S5P64XX_PA_HSMMC(1) ++#define S5P64XX_PA_HSMMC2 S5P64XX_PA_HSMMC(2) ++ ++#define S3C_PA_UART (0xEC005000) ++#define S3C_PA_UART0 (S3C_PA_UART + 0x00) ++#define S3C_PA_UART1 (S3C_PA_UART + 0x400) ++#define S3C_PA_UART2 (S3C_PA_UART + 0x800) ++#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) ++#define S3C_UART_OFFSET (0x400) ++ ++/* See notes on UART VA mapping in debug-macro.S */ ++#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) ++ ++#define S3C_VA_UART0 S3C_VA_UARTx(0) ++#define S3C_VA_UART1 S3C_VA_UARTx(1) ++#define S3C_VA_UART2 S3C_VA_UARTx(2) ++#define S3C_VA_UART3 S3C_VA_UARTx(3) ++#define S3C_SZ_UART SZ_256 ++ ++#define S5P64XX_PA_SYSCON (0xE0100000) ++#define S5P64XX_PA_TIMER (0xEA000000) ++#define S5P64XX_PA_IIC0 (0xEC104000) ++#define S5P64XX_PA_IIC1 (0xEC20F000) ++ ++#define S5P64XX_PA_SPI0 (0xEC400000) ++#define S5P64XX_PA_SPI1 (0xEC500000) ++#define S5P64XX_SZ_SPI0 SZ_4K ++#define S5P64XX_SZ_SPI1 SZ_4K ++ ++#define S5P64XX_PA_GPIO (0xE0308000) ++#define S5P64XX_VA_GPIO S3C_ADDR(0x00500000) ++#define S5P64XX_SZ_GPIO SZ_4K ++ ++#define S5P64XX_PA_SDRAM (0x20000000) ++#define S5P64XX_PA_VIC0 (0xE4000000) ++#define S5P64XX_PA_VIC1 (0xE4100000) ++ ++#define S5P64XX_VA_SROMC S3C_VA_SROMC ++#define S5P64XX_PA_SROMC (0xE7000000) ++#define S5P64XX_SZ_SROMC SZ_1M ++ ++#define S5P64XX_VA_LCD S3C_VA_LCD ++#define S5P64XX_PA_LCD (0xEE000000) ++#define S5P64XX_SZ_LCD SZ_1M ++ ++#define S5P64XX_PA_ADC (0xF3000000) ++ ++#define S5P64XX_PA_IIS_V40 (0xF2000000) ++#define S3C_SZ_IIS SZ_8K ++ ++#define S5P64XX_PA_RTC (0xEA100000) ++ ++/* place VICs close together */ ++#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) ++#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) ++ ++//////////////////////////////////////////////////// ++//These are not changed to support for s5p6440 ++ ++/* DMA controller */ ++#define S5P64XX_PA_DMA (0xE9000000) ++ ++#define S5P64XX_PA_SMC9115 (0x18000000) ++#define S5P64XX_SZ_SMC9115 SZ_512M ++ ++#define S5P64XX_PA_IIS (0xF2000000) ++/* Host I/F Indirect & Direct */ ++#define S5P64XX_VA_HOSTIFA S3C_ADDR(0x00B00000) ++#define S5P64XX_PA_HOSTIFA (0x74000000) ++#define S5P64XX_SZ_HOSTIFA SZ_1M ++ ++#define S5P64XX_VA_HOSTIFB S3C_ADDR(0x00C00000) ++#define S5P64XX_PA_HOSTIFB (0x74100000) ++#define S5P64XX_SZ_HOSTIFB SZ_1M ++ ++/////////////////////////////////////////////////// ++ ++/* Watchdog */ ++#define S5P64XX_PA_WATCHDOG (0xEA200000) ++#define S5P64XX_SZ_WATCHDOG SZ_4K ++ ++/* NAND flash controller */ ++#define S5P64XX_PA_NAND (0xE7100000) ++#define S5P64XX_SZ_NAND SZ_1M ++ ++/* USB OTG */ ++#define S5P64XX_VA_OTG S3C_ADDR(0x03900000) ++#define S5P64XX_PA_OTG (0xED100000) ++#define S5P64XX_SZ_OTG SZ_1M ++ ++/* USB OTG SFR */ ++#define S5P64XX_VA_OTGSFR S3C_ADDR(0x03a00000) ++#define S5P64XX_PA_OTGSFR (0xED200000) ++#define S5P64XX_SZ_OTGSFR SZ_1M ++ ++/* Post Processor */ ++#define S5P64XX_PA_POST (0xEE100000) ++#define S5P64XX_SZ_POST SZ_1M ++ ++/* compatibiltiy defines. */ ++#define S3C_PA_TIMER S5P64XX_PA_TIMER ++#define S3C_PA_HSMMC0 S5P64XX_PA_HSMMC0 ++#define S3C_PA_HSMMC1 S5P64XX_PA_HSMMC1 ++#define S3C_PA_HSMMC2 S5P64XX_PA_HSMMC2 ++#define S3C_SZ_HSMMC SZ_4K ++ ++#define S3C_PA_SPI0 S5P64XX_PA_SPI0 ++#define S3C_PA_SPI1 S5P64XX_PA_SPI1 ++#define S3C_SZ_SPI0 S5P64XX_SZ_SPI0 ++#define S3C_SZ_SPI1 S5P64XX_SZ_SPI1 ++ ++#define S3C_PA_IIC S5P64XX_PA_IIC0 ++#define S3C_PA_IIC1 S5P64XX_PA_IIC1 ++ ++#define S3C_PA_RTC S5P64XX_PA_RTC ++ ++#define S3C_PA_IIS S5P64XX_PA_IIS ++#define S3C_PA_ADC S5P64XX_PA_ADC ++#define S3C_PA_DMA S5P64XX_PA_DMA ++ ++#define S3C_VA_OTG S5P64XX_VA_OTG ++#define S3C_PA_OTG S5P64XX_PA_OTG ++#define S3C_SZ_OTG S5P64XX_SZ_OTG ++ ++#define S3C_VA_OTGSFR S5P64XX_VA_OTGSFR ++#define S3C_PA_OTGSFR S5P64XX_PA_OTGSFR ++#define S3C_SZ_OTGSFR S5P64XX_SZ_OTGSFR ++ ++#endif /* __ASM_ARCH_6440_MAP_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/memory.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/memory.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/memory.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/memory.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,23 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/memory.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_MEMORY_H ++#define __ASM_ARCH_MEMORY_H ++ ++ ++#define PHYS_OFFSET UL(0x20000000) ++#define CONSISTENT_DMA_SIZE SZ_8M ++ ++#define __virt_to_bus(x) __virt_to_phys(x) ++#define __bus_to_virt(x) __phys_to_virt(x) ++ ++#endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/regs-irq.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/regs-irq.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/regs-irq.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/regs-irq.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,69 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5P64XX - IRQ register definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_REGS_IRQ_H ++#define __ASM_ARCH_REGS_IRQ_H __FILE__ ++ ++#include ++#include ++/* interrupt controller */ ++#define S3C_VIC0REG(x) ((x) + S3C_VA_VIC0) ++#define S3C_VIC1REG(x) ((x) + S3C_VA_VIC1) ++ ++#define S5P64XX_VIC0IRQSTATUS S3C_VIC0REG(0x000) ++#define S5P64XX_VIC1IRQSTATUS S3C_VIC1REG(0x000) ++ ++#define S5P64XX_VIC0FIQSTATUS S3C_VIC0REG(0x004) ++#define S5P64XX_VIC1FIQSTATUS S3C_VIC1REG(0x004) ++ ++#define S5P64XX_VIC0RAWINTR S3C_VIC0REG(0x008) ++#define S5P64XX_VIC1RAWINTR S3C_VIC1REG(0x008) ++ ++#define S5P64XX_VIC0INTSELECT S3C_VIC0REG(0x00C) ++#define S5P64XX_VIC1INTSELECT S3C_VIC1REG(0x00C) ++ ++#define S5P64XX_VIC0INTENABLE S3C_VIC0REG(0x010) ++#define S5P64XX_VIC1INTENABLE S3C_VIC1REG(0x010) ++ ++#define S5P64XX_VIC0INTENCLEAR S3C_VIC0REG(0x014) ++#define S5P64XX_VIC1INTENCLEAR S3C_VIC1REG(0x014) ++ ++#define S5P64XX_VIC0SOFTINT S3C_VIC0REG(0x018) ++#define S5P64XX_VIC1SOFTINT S3C_VIC1REG(0x018) ++ ++#define S5P64XX_VIC0SOFTINTCLEAR S3C_VIC0REG(0x01C) ++#define S5P64XX_VIC1SOFTINTCLEAR S3C_VIC1REG(0x01C) ++ ++#define S5P64XX_VIC0PROTECTION S3C_VIC0REG(0x020) ++#define S5P64XX_VIC1PROTECTION S3C_VIC1REG(0x020) ++ ++#define S5P64XX_VIC0SWPRIORITYMASK S3C_VIC0REG(0x024) ++#define S5P64XX_VIC1SWPRIORITYMASK S3C_VIC1REG(0x024) ++ ++#define S5P64XX_VIC0PRIORITYDAISY S3C_VIC0REG(0x028) ++#define S5P64XX_VIC1PRIORITYDAISY S3C_VIC1REG(0x028) ++ ++#define S5P64XX_VIC0VECTADDR0 S3C_VIC0REG(0x100) ++#define S5P64XX_VIC1VECTADDR0 S3C_VIC1REG(0x100) ++ ++#define S5P64XX_VIC0VECTADDR1 S3C_VIC0REG(0x104) ++#define S5P64XX_VIC1VECTADDR1 S3C_VIC1REG(0x104) ++ ++#define S5P64XX_VIC0VECTADDR2 S3C_VIC0REG(0x108) ++#define S5P64XX_VIC1VECTADDR2 S3C_VIC1REG(0x108) ++ ++#define S5P64XX_VIC0ADDRESS S3C_VIC0REG(0xF00) ++#define S5P64XX_VIC1ADDRESS S3C_VIC1REG(0xF00) ++ ++#endif /* __ASM_ARCH_6400_REGS_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/regs-mem.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/regs-mem.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/regs-mem.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/regs-mem.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,70 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/regs-mem.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C2410 Memory Control register definitions ++*/ ++ ++#ifndef __ASM_ARM_MEMREGS_H ++#define __ASM_ARM_MEMREGS_H ++ ++#ifndef S5P64XX_MEMREG ++#define S5P64XX_MEMREG(x) (S5P64XX_VA_SROMC + (x)) ++#endif ++ ++ ++/* Bank Idle Cycle Control Registers 0-5 */ ++#define S5P64XX_SROM_BW S5P64XX_MEMREG(0x00) ++ ++#define S5P64XX_SROM_BC0 S5P64XX_MEMREG(0x04) ++#define S5P64XX_SROM_BC1 S5P64XX_MEMREG(0x08) ++#define S5P64XX_SROM_BC2 S5P64XX_MEMREG(0x0C) ++#define S5P64XX_SROM_BC3 S5P64XX_MEMREG(0x10) ++#define S5P64XX_SROM_BC4 S5P64XX_MEMREG(0x14) ++#define S5P64XX_SROM_BC5 S5P64XX_MEMREG(0x18) ++ ++/* SROM BW */ ++#define S5P64XX_SROM_BW_DATA_WIDTH0_8BIT (0 << 0) ++#define S5P64XX_SROM_BW_DATA_WIDTH0_16BIT (1 << 0) ++#define S5P64XX_SROM_BW_DATA_WIDTH0_MASK (1 << 0) ++ ++#define S5P64XX_SROM_BW_WAIT_ENABLE0_DISABLE (0 << 2) ++#define S5P64XX_SROM_BW_WAIT_ENABLE0_ENABLE (1 << 2) ++#define S5P64XX_SROM_BW_WAIT_ENABLE0_MASK (1 << 2) ++ ++#define S5P64XX_SROM_BW_BYTE_ENABLE0_DISABLE (0 << 3) ++#define S5P64XX_SROM_BW_BYTE_ENABLE0_ENABLE (1 << 3) ++#define S5P64XX_SROM_BW_BYTE_ENABLE0_MASK (1 << 3) ++ ++#define S5P64XX_SROM_BW_DATA_WIDTH1_8BIT (0 << 4) ++#define S5P64XX_SROM_BW_DATA_WIDTH1_16BIT (1 << 4) ++#define S5P64XX_SROM_BW_DATA_WIDTH1_MASK (1 << 4) ++ ++#define S5P64XX_SROM_BW_WAIT_ENABLE1_DISABLE (0 << 6) ++#define S5P64XX_SROM_BW_WAIT_ENABLE1_ENABLE (1 << 6) ++#define S5P64XX_SROM_BW_WAIT_ENABLE1_MASK (1 << 6) ++ ++#define S5P64XX_SROM_BW_BYTE_ENABLE1_DISABLE (0 << 7) ++#define S5P64XX_SROM_BW_BYTE_ENABLE1_ENABLE (1 << 7) ++#define S5P64XX_SROM_BW_BYTE_ENABLE1_MASK (1 << 7) ++ ++#define S5P64XX_SROM_BW_DATA_WIDTH2_8BIT (0 << 8) ++#define S5P64XX_SROM_BW_DATA_WIDTH2_16BIT (1 << 8) ++#define S5P64XX_SROM_BW_DATA_WIDTH2_MASK (1 << 8) ++ ++/* SROM BCn */ ++#define S5P64XX_SROM_BCn_TACS(x) (x << 28) ++#define S5P64XX_SROM_BCn_TCOS(x) (x << 24) ++#define S5P64XX_SROM_BCn_TACC(x) (x << 16) ++#define S5P64XX_SROM_BCn_TCOH(x) (x << 12) ++#define S5P64XX_SROM_BCn_TCAH(x) (x << 8) ++#define S5P64XX_SROM_BCn_TACP(x) (x << 4) ++#define S5P64XX_SROM_BCn_PMC_NORMAL (0 << 0) ++#define S5P64XX_SROM_BCn_PMC_4 (1 << 0) ++ ++#endif /* __ASM_ARM_MEMREGS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/system.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/system.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/system.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/system.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,47 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/system.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - system implementation ++ */ ++ ++#ifndef __ASM_ARCH_SYSTEM_H ++#define __ASM_ARCH_SYSTEM_H __FILE__ ++ ++#include ++#include ++#include ++ ++void (*s5p64xx_idle)(void); ++void (*s5p64xx_reset_hook)(void); ++ ++void s5p64xx_default_idle(void) ++{ ++ /* nothing here yet */ ++} ++ ++static void arch_idle(void) ++{ ++ if (s5p64xx_idle != NULL) ++ (s5p64xx_idle)(); ++ else ++ s5p64xx_default_idle(); ++} ++ ++static void arch_reset(char mode) ++{ ++ void __iomem *wdt_reg; ++ ++ wdt_reg = ioremap(S5P64XX_PA_WATCHDOG,S5P64XX_SZ_WATCHDOG); ++ ++ /* nothing here yet */ ++ ++ writel(S3C2410_WTCNT_CNT, wdt_reg + S3C2410_WTCNT_OFFSET); /* Watchdog Count Register*/ ++ writel(S3C2410_WTCNT_CON, wdt_reg + S3C2410_WTCON_OFFSET); /* Watchdog Controller Register*/ ++ writel(S3C2410_WTCNT_DAT, wdt_reg + S3C2410_WTDAT_OFFSET); /* Watchdog Data Register*/ ++} ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/tick.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/tick.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/tick.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/tick.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,29 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/tick.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5P64XX - Timer tick support definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_TICK_H ++#define __ASM_ARCH_TICK_H __FILE__ ++ ++/* note, the timer interrutps turn up in 2 places, the vic and then ++ * the timer block. We take the VIC as the base at the moment. ++ */ ++static inline u32 s3c24xx_ostimer_pending(void) ++{ ++ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); ++ return pend & 1 << (IRQ_TIMER4_VIC - S5P64XX_IRQ_VIC0(0)); ++} ++ ++#define TICK_MAX (0xffffffff) ++ ++#endif /* __ASM_ARCH_6400_TICK_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/include/mach/uncompress.h linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/uncompress.h +--- linux-2.6.28/arch/arm/mach-s5p6440/include/mach/uncompress.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/include/mach/uncompress.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,26 @@ ++/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S3C6400 - uncompress code ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_UNCOMPRESS_H ++#define __ASM_ARCH_UNCOMPRESS_H ++ ++#include ++#include ++ ++static void arch_detect_cpu(void) ++{ ++ /* we do not need to do any cpu detection here at the moment. */ ++} ++ ++#endif /* __ASM_ARCH_UNCOMPRESS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/mach-smdk6440.c linux-2.6.28.6/arch/arm/mach-s5p6440/mach-smdk6440.c +--- linux-2.6.28/arch/arm/mach-s5p6440/mach-smdk6440.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/mach-smdk6440.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,432 @@ ++/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++#ifdef CONFIG_USB_SUPPORT ++#include ++#include ++ ++/* S3C_USB_CLKSRC 0: EPLL 1: CLK_48M */ ++#define S3C_USB_CLKSRC 1 ++#define OTGH_PHY_CLK_VALUE (0x02) /* UTMI Interface, Cristal, 12Mhz clk for PLL */ ++#endif ++ ++#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK ++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB ++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE ++ ++//static struct samspi_device spidev_b0_cs0; ++#if 0 ++static struct samspi_device ProtocolADriver_b1_cs0; ++static struct samspi_device spidev_b0_cs1; ++static struct samspi_device ProtocolBDriver_b1_cs1; ++static struct samspi_device spidev_b1_cs2; ++#endif ++ ++static struct spi_board_info __initdata sam_spi_devs[] = { ++ [0] = { ++ .modalias = "spidev", /* Test Interface */ ++ .mode = SPI_MODE_2, /* CPOL=1, CPHA=0 */ ++ .max_speed_hz = 2468013, ++ /* Connected to SPI-0 as 1st Slave */ ++ .bus_num = 0, ++ .irq = IRQ_SPI0, ++ .chip_select = 0, ++// .controller_data = (void *)&spidev_b0_cs0, ++#if 0 ++ }, { ++ .modalias = "ProtocolADriver", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 1357923, ++ /* Connected to SPI-1 as 1st Slave */ ++ .bus_num = 1, ++ .irq = IRQ_SPI1, ++ .chip_select = 0, ++ .controller_data = (void *)&ProtocolADriver_b1_cs0, ++ }, { ++ .modalias = "spidev", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 2357923, ++ /* Connected to SPI-0 as 2nd Slave */ ++ .bus_num = 0, ++ .irq = IRQ_SPI0, ++ .chip_select = 1, ++ .controller_data = (void *)&spidev_b0_cs1, ++ }, { ++ .modalias = "ProtocolBDriver", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 3357923, ++ /* Connected to SPI-1 as 2ndst Slave */ ++ .bus_num = 1, ++ .irq = IRQ_SPI1, ++ .chip_select = 1, ++ .controller_data = (void *)&ProtocolBDriver_b1_cs1, ++ }, { ++ .modalias = "spidev", ++ .mode = SPI_MODE_2, ++ .max_speed_hz = 4357923, ++ /* Connected to SPI-1 as 3rd Slave */ ++ .bus_num = 1, ++ .irq = IRQ_SPI1, ++ .chip_select = 2, ++ .controller_data = (void *)&spidev_b1_cs2, ++#endif ++ }, ++}; ++ ++static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { ++ [0] = { ++ .hwport = 0, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++ [1] = { ++ .hwport = 1, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++ [2] = { ++ .hwport = 2, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++ [3] = { ++ .hwport = 3, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ }, ++}; ++ ++struct map_desc smdk6440_iodesc[] = {}; ++ ++static struct platform_device *smdk6440_devices[] __initdata = { ++#ifdef CONFIG_SMDK6440_SD_CH0 ++ &s3c_device_hsmmc0, ++#endif ++#ifdef CONFIG_SMDK6440_SD_CH1 ++ &s3c_device_hsmmc1, ++#endif ++#ifdef CONFIG_SMDK6440_SD_CH2 ++ &s3c_device_hsmmc2, ++#endif ++ &s3c_device_wdt, ++ &s3c_device_rtc, ++ &s3c_device_i2c0, ++ &s3c_device_i2c1, ++ &s3c_device_spi0, ++ &s3c_device_spi1, ++ &s3c_device_ts, ++ &s3c_device_smc911x, ++ &s3c_device_lcd, ++ &s3c_device_nand, ++ &s3c_device_usbgadget, ++ &s3c_device_usb_otghcd, ++ ++#ifdef CONFIG_S5P64XX_ADC ++ &s3c_device_adc, ++#endif ++ ++#ifdef CONFIG_HAVE_PWM ++ &s3c_device_timer[0], ++ &s3c_device_timer[1], ++#endif ++}; ++ ++static struct i2c_board_info i2c_devs0[] __initdata = { ++ { I2C_BOARD_INFO("24c08", 0x50), }, ++ //{ I2C_BOARD_INFO("WM8580", 0x10), }, ++}; ++ ++static struct i2c_board_info i2c_devs1[] __initdata = { ++ { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ ++ { I2C_BOARD_INFO("WM8580", 0x1a), }, ++ //{ I2C_BOARD_INFO("WM8580", 0x1b), }, ++}; ++ ++ ++static struct s3c_ts_mach_info s3c_ts_platform __initdata = { ++ .delay = 10000, ++ .presc = 49, ++ .oversampling_shift = 2, ++ .resol_bit = 12, ++ .s3c_adc_con = ADC_TYPE_2, ++}; ++ ++static struct s3c_adc_mach_info s3c_adc_platform = { ++ /* s3c6410 support 12-bit resolution */ ++ .delay = 10000, ++ .presc = 49, ++ .resolution = 12, ++}; ++ ++#if defined(CONFIG_HAVE_PWM) ++static struct platform_pwm_backlight_data smdk_backlight_data = { ++ .pwm_id = 1, ++ .max_brightness = 255, ++ .dft_brightness = 255, ++ .pwm_period_ns = 78770, ++}; ++ ++static struct platform_device smdk_backlight_device = { ++ .name = "pwm-backlight", ++ .dev = { ++ .parent = &s3c_device_timer[1].dev, ++ .platform_data = &smdk_backlight_data, ++ }, ++}; ++ ++static void __init smdk_backlight_register(void) ++{ ++ int ret = platform_device_register(&smdk_backlight_device); ++ if (ret) ++ printk(KERN_ERR "smdk: failed to register backlight device: %d\n", ret); ++} ++#else ++#define smdk_backlight_register() do { } while (0) ++#endif ++ ++void smdk6440_setup_sdhci0 (void); ++ ++static void __init smdk6440_map_io(void) ++{ ++ s3c_device_nand.name = "s5p6440-nand"; ++ ++ s5p64xx_init_io(smdk6440_iodesc, ARRAY_SIZE(smdk6440_iodesc)); ++ s3c24xx_init_clocks(12000000); ++ s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); ++ ++ smdk6440_setup_sdhci0(); ++} ++ ++static void __init smdk6440_smc911x_set(void) ++{ ++ unsigned int tmp; ++ ++ tmp = __raw_readl(S5P64XX_SROM_BW); ++ tmp &= ~(S5P64XX_SROM_BW_WAIT_ENABLE1_MASK | S5P64XX_SROM_BW_WAIT_ENABLE1_MASK | ++ S5P64XX_SROM_BW_DATA_WIDTH1_MASK); ++ tmp |= S5P64XX_SROM_BW_BYTE_ENABLE1_ENABLE | S5P64XX_SROM_BW_WAIT_ENABLE1_ENABLE | ++ S5P64XX_SROM_BW_DATA_WIDTH1_16BIT; ++ ++ __raw_writel(tmp, S5P64XX_SROM_BW); ++ ++ __raw_writel(S5P64XX_SROM_BCn_TACS(0) | S5P64XX_SROM_BCn_TCOS(4) | ++ S5P64XX_SROM_BCn_TACC(13) | S5P64XX_SROM_BCn_TCOH(1) | ++ S5P64XX_SROM_BCn_TCAH(4) | S5P64XX_SROM_BCn_TACP(6) | ++ S5P64XX_SROM_BCn_PMC_NORMAL, S5P64XX_SROM_BC1); ++} ++ ++static void __init smdk6440_machine_init(void) ++{ ++ s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info; ++ ++ smdk6440_smc911x_set(); ++ ++ s3c_i2c0_set_platdata(NULL); ++ s3c_i2c1_set_platdata(NULL); ++ ++ s3c_ts_set_platdata(&s3c_ts_platform); ++ s3c_adc_set_platdata(&s3c_adc_platform); ++ ++ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); ++ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); ++ ++ spi_register_board_info(sam_spi_devs, ARRAY_SIZE(sam_spi_devs)); ++ ++ platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); ++ ++ s5p6440_pm_init(); ++ ++ smdk_backlight_register(); ++ ++} ++ ++MACHINE_START(SMDK6440, "SMDK6440") ++ /* Maintainer: Ben Dooks */ ++ .phys_io = S3C_PA_UART & 0xfff00000, ++ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, ++ .boot_params = S5P64XX_PA_SDRAM + 0x100, ++ ++ .init_irq = s5p6440_init_irq, ++ .map_io = smdk6440_map_io, ++ .init_machine = smdk6440_machine_init, ++ .timer = &s3c64xx_timer, ++MACHINE_END ++ ++#ifdef CONFIG_USB_SUPPORT ++/* Initializes OTG Phy. */ ++void otg_phy_init(void) { ++ ++ int err; ++ ++ if (gpio_is_valid(S5P64XX_GPN(1))) { ++ err = gpio_request(S5P64XX_GPN(1), "GPN"); ++ ++ if(err) ++ printk(KERN_ERR "failed to request GPN1\n"); ++ ++ gpio_direction_output(S5P64XX_GPN(1), 1); ++ } ++ ++ writel(readl(S3C_OTHERS)&~S3C_OTHERS_USB_SIG_MASK, S3C_OTHERS); ++ writel(0x0, S3C_USBOTG_PHYPWR); /* Power up */ ++ writel(OTGH_PHY_CLK_VALUE, S3C_USBOTG_PHYCLK); ++ writel(0x1, S3C_USBOTG_RSTCON); ++ ++ udelay(50); ++ writel(0x0, S3C_USBOTG_RSTCON); ++ udelay(50); ++} ++EXPORT_SYMBOL(otg_phy_init); ++ ++/* USB Control request data struct must be located here for DMA transfer */ ++struct usb_ctrlrequest usb_ctrl __attribute__((aligned(8))); ++EXPORT_SYMBOL(usb_ctrl); ++ ++/* OTG PHY Power Off */ ++void otg_phy_off(void) { ++ writel(readl(S3C_USBOTG_PHYPWR)|(0x1F<<1), S3C_USBOTG_PHYPWR); ++ writel(readl(S3C_OTHERS)&~S3C_OTHERS_USB_SIG_MASK, S3C_OTHERS); ++ ++ gpio_free(S5P64XX_GPN(1)); ++} ++EXPORT_SYMBOL(otg_phy_off); ++ ++#endif ++ ++#if defined(CONFIG_RTC_DRV_S3C) ++/* RTC common Function for samsung APs*/ ++unsigned int s3c_rtc_set_bit_byte(void __iomem *base, uint offset, uint val) ++{ ++ writeb(val, base + offset); ++ ++ return 0; ++} ++ ++unsigned int s3c_rtc_read_alarm_status(void __iomem *base) ++{ ++ return 1; ++} ++ ++void s3c_rtc_set_pie(void __iomem *base, uint to) ++{ ++ unsigned int tmp; ++ ++ tmp = readw(base + S3C2410_RTCCON) & ~S3C_RTCCON_TICEN; ++ ++ if (to) ++ tmp |= S3C_RTCCON_TICEN; ++ ++ writew(tmp, base + S3C2410_RTCCON); ++} ++ ++void s3c_rtc_set_freq_regs(void __iomem *base, uint freq, uint s3c_freq) ++{ ++ unsigned int tmp; ++ ++ tmp = readw(base + S3C2410_RTCCON) & (S3C_RTCCON_TICEN | S3C2410_RTCCON_RTCEN ); ++ writew(tmp, base + S3C2410_RTCCON); ++ s3c_freq = freq; ++ tmp = (32768 / freq)-1; ++ writel(tmp, base + S3C2410_TICNT); ++} ++ ++void s3c_rtc_enable_set(struct platform_device *pdev,void __iomem *base, int en) ++{ ++ unsigned int tmp; ++ ++ if (!en) { ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp & ~ (S3C2410_RTCCON_RTCEN | S3C_RTCCON_TICEN), base + S3C2410_RTCCON); ++ } else { ++ /* re-enable the device, and check it is ok */ ++ if ((readw(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){ ++ dev_info(&pdev->dev, "rtc disabled, re-enabling\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON); ++ } ++ ++ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){ ++ dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON); ++ } ++ ++ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){ ++ dev_info(&pdev->dev, "removing RTCCON_CLKRST\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON); ++ } ++ } ++} ++#endif ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/pm.c linux-2.6.28.6/arch/arm/mach-s5p6440/pm.c +--- linux-2.6.28/arch/arm/mach-s5p6440/pm.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/pm.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,103 @@ ++/* linux/arch/arm/mach-s5p6440/pm.c ++ * ++ * Copyright (c) 2006 Samsung Electronics ++ * ++ * ++ * S3C6410 (and compatible) Power Manager (Suspend-To-RAM) support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++ ++#include ++#include ++//#include ++#include ++#include ++ ++#ifdef CONFIG_S3C2410_PM_DEBUG ++extern void pm_dbg(const char *fmt, ...); ++#define DBG(fmt...) pm_dbg(fmt) ++#else ++#define DBG(fmt...) printk(KERN_DEBUG fmt) ++#endif ++ ++//static void s5p6440_cpu_suspend(void) ++void s5p6440_cpu_suspend(void) ++{ ++ unsigned long tmp; ++ ++ /* issue the standby signal into the pm unit. Note, we ++ * issue a write-buffer drain just in case */ ++ ++ tmp = 0; ++ ++ asm("b 1f\n\t" ++ ".align 5\n\t" ++ "1:\n\t" ++ "mcr p15, 0, %0, c7, c10, 5\n\t" ++ "mcr p15, 0, %0, c7, c10, 4\n\t" ++ "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); ++ ++ /* we should never get past here */ ++ ++ panic("sleep resumed to originator?"); ++} ++ ++static void s5p6440_pm_prepare(void) ++{ ++ ++} ++ ++static int s5p6440_pm_add(struct sys_device *sysdev) ++{ ++ pm_cpu_prep = s5p6440_pm_prepare; ++ pm_cpu_sleep = s5p6440_cpu_suspend; ++ ++ return 0; ++} ++ ++static struct sleep_save s5p6440_sleep[] = { ++ ++}; ++ ++static int s5p6440_pm_resume(struct sys_device *dev) ++{ ++ s5p6440_pm_do_restore(s5p6440_sleep, ARRAY_SIZE(s5p6440_sleep)); ++ return 0; ++} ++ ++static struct sysdev_driver s5p6440_pm_driver = { ++ .add = s5p6440_pm_add, ++ .resume = s5p6440_pm_resume, ++}; ++ ++static __init int s5p6440_pm_drvinit(void) ++{ ++ return sysdev_driver_register(&s5p6440_sysclass, &s5p6440_pm_driver); ++} ++ ++arch_initcall(s5p6440_pm_drvinit); ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5p6440/setup-sdhci.c linux-2.6.28.6/arch/arm/mach-s5p6440/setup-sdhci.c +--- linux-2.6.28/arch/arm/mach-s5p6440/setup-sdhci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5p6440/setup-sdhci.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,160 @@ ++/* linux/arch/arm/mach-s3c6410/setup-sdhci.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ ++ ++char *s3c6410_hsmmc_clksrcs[4] = { ++ [0] = "hsmmc", ++ [1] = "hsmmc", ++ [2] = "mmc_bus", ++ /* [3] = "48m", - note not succesfully used yet */ ++}; ++ ++void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* GPIO should be set on 4bit though 1-bit setting is comming. */ ++ if (width == 1) ++ width = 4; ++ end = S5P64XX_GPG(2 + width); ++ ++ /* Set all the necessary GPG pins to special-function 0 */ ++ for (gpio = S5P64XX_GPG(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++#if 0 ++ s3c_gpio_setpull(S5P64XX_GPG(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S5P64XX_GPG(6), S3C_GPIO_SFN(2)); ++#endif ++} ++ ++void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, ++ void __iomem *r, ++ struct mmc_ios *ios, ++ struct mmc_card *card) ++{ ++ u32 ctrl2, ctrl3 = 0; ++ ++ /* don't need to alter anything acording to card-type */ ++ ++ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); ++ ++ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); ++ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; ++ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | ++ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | ++ S3C_SDHCI_CTRL2_ENFBCLKRX | ++ S3C_SDHCI_CTRL2_DFCNT_NONE | ++ S3C_SDHCI_CTRL2_ENCLKOUTHOLD); ++ ++ writel(ctrl2, r + S3C_SDHCI_CONTROL2); ++ writel(ctrl3, r + S3C_SDHCI_CONTROL3); ++} ++ ++void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* GPIO should be set on 4bit though 1-bit setting is comming. */ ++ if (width == 1) ++ width = 4; ++ end = S5P64XX_GPH(2 + width); ++ ++ /* Set all the necessary GPG pins to special-function 0 */ ++ for (gpio = S5P64XX_GPH(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ s3c_gpio_setpull(S5P64XX_GPG(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S5P64XX_GPG(6), S3C_GPIO_SFN(3)); ++} ++ ++void s3c6410_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) ++{ ++ /* XXX: should be done later. */ ++#if 0 ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* GPIO should be set on 4bit though 1-bit setting is comming. */ ++ if (width == 1) ++ width = 4; ++ end = S5P64XX_GPH(2 + width); ++ ++ /* Set all the necessary GPG pins to special-function 0 */ ++ for (gpio = S5P64XX_GPH(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ s3c_gpio_setpull(S5P64XX_GPG(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S5P64XX_GPG(6), S3C_GPIO_SFN(3)); ++#endif ++} ++ ++static void setup_sdhci0_irq_cd (void) ++{ ++ /* init GPIO as a ext irq */ ++ s3c_gpio_cfgpin(S5P64XX_GPN(13), S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(S5P64XX_GPN(13), S3C_GPIO_PULL_NONE); ++ ++ set_irq_type(S3C_EINT(13), IRQ_TYPE_EDGE_BOTH); ++} ++ ++static uint detect_sdhci0_irq_cd (void) ++{ ++ uint detect; ++ ++ detect = readl(S5P64XX_GPNDAT); ++ detect &= 0x2000; /* GPN13 */ ++ ++ return (!detect); ++} ++ ++static struct s3c_sdhci_platdata s3c_hsmmc0_platdata = { ++ .max_width = 4, ++ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_SD_HIGHSPEED | MMC_CAP_BOOT_ONTHEFLY), ++ .cfg_ext_cd = setup_sdhci0_irq_cd, ++ .detect_ext_cd = detect_sdhci0_irq_cd, ++ .ext_cd = S3C_EINT(13), ++}; ++ ++void smdk6440_setup_sdhci0 (void) ++{ ++ s3c_sdhci0_set_platdata(&s3c_hsmmc0_platdata); ++} ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/Kconfig linux-2.6.28.6/arch/arm/mach-s5pc100/Kconfig +--- linux-2.6.28/arch/arm/mach-s5pc100/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,33 @@ ++# arch/arm/mach-s5pc100/Kconfig ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++# Configuration options for the S5PC100 CPU ++ ++config CPU_S5PC100 ++ bool ++ select CPU_S5PC100_INIT ++ select CPU_S5PC100_CLOCK ++ help ++ Enable S5PC100 CPU support ++ ++config S5PC1XX_SETUP_SDHCI ++ bool ++ help ++ Internal helper functions for S5PC1XX based SDHCI systems ++ ++config MACH_SMDKC100 ++ bool "SMDKC100" ++ select CPU_S5PC100 ++ select S3C_DMA_PL330 ++ select S3C_DEV_I2C1 ++ select S3C_DEV_HSMMC ++ select S3C_DEV_HSMMC1 ++ select S5PC1XX_SETUP_SDHCI ++ select S3C64XX_SETUP_I2C1 ++ help ++ Machine support for the Samsung SMDKC100 ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/Makefile linux-2.6.28.6/arch/arm/mach-s5pc100/Makefile +--- linux-2.6.28/arch/arm/mach-s5pc100/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,29 @@ ++# arch/arm/mach-s5pc100/Makefile ++# ++# Copyright 2008 Openmoko, Inc. ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 ++ ++obj-y := ++led-y := leds.o ++obj-m := ++obj-n := ++obj- := ++ ++# Core support for S5PC100 system ++ ++obj-$(CONFIG_CPU_S5PC100) += cpu.o ++obj-$(CONFIG_CPU_S5PC100) += dma.o ++ ++# Helper and device support ++obj-$(CONFIG_PM) += pm.o ++obj-$(CONFIG_S5PC1XX_SETUP_SDHCI) += setup-sdhci.o ++ ++# machine support ++ ++obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o ++ ++# LEDs support ++led-$(CONFIG_MACH_SMDKC100) += leds-s5pc100.o ++obj-$(CONFIG_LEDS) += $(led-y) +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/Makefile.boot linux-2.6.28.6/arch/arm/mach-s5pc100/Makefile.boot +--- linux-2.6.28/arch/arm/mach-s5pc100/Makefile.boot 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/Makefile.boot 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,2 @@ ++ zreladdr-y := 0x20008000 ++params_phys-y := 0x20000100 +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/cpu.c linux-2.6.28.6/arch/arm/mach-s5pc100/cpu.c +--- linux-2.6.28/arch/arm/mach-s5pc100/cpu.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/cpu.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,166 @@ ++/* linux/arch/arm/mach-s5pc100/cpu.c ++ * ++ * Copyright 2008 Samsung Electronics ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#undef T32_PROBE_DEBUGGING ++ ++#if defined(T32_PROBE_DEBUGGING) ++#include ++#include ++#include ++#endif ++ ++/* Initial IO mappings */ ++ ++static struct map_desc s5pc100_iodesc[] __initdata = { ++ IODESC_ENT(LCD), ++ IODESC_ENT(SROMC), ++ IODESC_ENT(SYSTIMER), ++ IODESC_ENT(OTG), ++ IODESC_ENT(OTGSFR), ++ IODESC_ENT(SYSCON), ++ IODESC_ENT(GPIO), ++ IODESC_ENT(NAND), ++ //IODESC_ENT(HOSTIFB), ++}; ++ ++/* s5pc100_map_io ++ * ++ * register the standard cpu IO areas ++*/ ++ ++static void s5pc100_idle(void) ++{ ++#if !defined(CONFIG_MMC_SDHCI_S3C) && !defined(CONFIG_MMC_SDHCI_MODULE) ++ unsigned int tmp; ++ ++#if defined(T32_PROBE_DEBUGGING) ++/* debugging with T32 GPIO port GPD1 which is connected with 2 pin of J1 connector */ ++ gpio_direction_output(S5PC1XX_GPD(1), 0); ++#endif ++/* ++ * 1. Set CFG_STANDBYWFI field of PWR_CFG to 2¡¯b01. ++ * 2. Set PMU_INT_DISABLE bit of OTHERS register to 1¡¯b1 to prevent interrupts from ++ * occurring while entering IDLE mode. ++ * 3. Execute Wait For Interrupt instruction (WFI). ++*/ ++ tmp = __raw_readl(S5P_PWR_CFG); ++ tmp &= S5P_CFG_WFI_CLEAN; ++ tmp |= S5P_CFG_WFI_IDLE; ++ __raw_writel(tmp, S5P_PWR_CFG); ++ ++ cpu_do_idle(); ++ ++#if defined(T32_PROBE_DEBUGGING) ++ gpio_direction_output(S5PC1XX_GPD(1), 1); ++#endif ++#endif ++} ++ ++void __init s5pc100_map_io(void) ++{ ++ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); ++ ++ /* HS-MMC Platform data */ ++ ++ s3c6410_default_sdhci0(); ++ s3c6410_default_sdhci1(); ++ ++ /* set s5pc100 idle function */ ++ ++ s5pc1xx_idle = s5pc100_idle; ++ ++ ++#if 0 ++ /* the i2c devices are directly compatible with s3c2440 */ ++ s3c_i2c0_setname("s3c2440-i2c"); ++ s3c_i2c1_setname("s3c2440-i2c"); ++#endif ++} ++ ++void __init s5pc100_init_clocks(int xtal) ++{ ++ printk(KERN_DEBUG "%s: initialising clocks\n", __func__); ++ s3c24xx_register_baseclocks(xtal); ++ s5pc1xx_register_clocks(); ++ s5pc100_register_clocks(); ++ s5pc100_setup_clocks(); ++#if defined(CONFIG_TIMER_PWM) ++ s3c24xx_pwmclk_init(); ++#endif ++} ++ ++void __init s5pc100_init_irq(void) ++{ ++ /* VIC0, VIC1, and VIC2 are fully populated. */ ++ s5pc1xx_init_irq(~0, ~0, ~0); ++} ++ ++struct sysdev_class s5pc100_sysclass = { ++ .name = "s5pc100-core", ++}; ++ ++static struct sys_device s5pc100_sysdev = { ++ .cls = &s5pc100_sysclass, ++}; ++ ++static int __init s5pc100_core_init(void) ++{ ++ return sysdev_class_register(&s5pc100_sysclass); ++} ++ ++core_initcall(s5pc100_core_init); ++ ++int __init s5pc100_init(void) ++{ ++ printk("S5PC100: Initialising architecture\n"); ++ ++#if defined (CONFIG_S3C_SIR) ++ s3c24xx_uart_src[3]->name = "s3c-irda"; ++#endif ++ ++ return sysdev_register(&s5pc100_sysdev); ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/dma.c linux-2.6.28.6/arch/arm/mach-s5pc100/dma.c +--- linux-2.6.28/arch/arm/mach-s5pc100/dma.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/dma.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,306 @@ ++/* linux/arch/arm/mach-s5pc100/dma.c ++ * ++ * Copyright (c) 2003-2008,2009 Samsung Electronics ++ * ++ * S5PC100 DMA selection ++ * ++ * http://www.samsung.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++/* M2M DMAC */ ++#define MAP0(x) { \ ++ [0] = (x) | DMA_CH_VALID, \ ++ [1] = (x) | DMA_CH_VALID, \ ++ [2] = (x) | DMA_CH_VALID, \ ++ [3] = (x) | DMA_CH_VALID, \ ++ [4] = (x) | DMA_CH_VALID, \ ++ [5] = (x) | DMA_CH_VALID, \ ++ [6] = (x) | DMA_CH_VALID, \ ++ [7] = (x) | DMA_CH_VALID, \ ++ [8] = (x), \ ++ [9] = (x), \ ++ [10] = (x), \ ++ [11] = (x), \ ++ [12] = (x), \ ++ [13] = (x), \ ++ [14] = (x), \ ++ [15] = (x), \ ++ [16] = (x), \ ++ [17] = (x), \ ++ [18] = (x), \ ++ [19] = (x), \ ++ [20] = (x), \ ++ [21] = (x), \ ++ [22] = (x), \ ++ [23] = (x), \ ++ } ++ ++/* Peri-DMAC 0 */ ++#define MAP1(x) { \ ++ [0] = (x), \ ++ [1] = (x), \ ++ [2] = (x), \ ++ [3] = (x), \ ++ [4] = (x), \ ++ [5] = (x), \ ++ [6] = (x), \ ++ [7] = (x), \ ++ [8] = (x) | DMA_CH_VALID, \ ++ [9] = (x) | DMA_CH_VALID, \ ++ [10] = (x) | DMA_CH_VALID, \ ++ [11] = (x) | DMA_CH_VALID, \ ++ [12] = (x) | DMA_CH_VALID, \ ++ [13] = (x) | DMA_CH_VALID, \ ++ [14] = (x) | DMA_CH_VALID, \ ++ [15] = (x) | DMA_CH_VALID, \ ++ [16] = (x), \ ++ [17] = (x), \ ++ [18] = (x), \ ++ [19] = (x), \ ++ [20] = (x), \ ++ [21] = (x), \ ++ [22] = (x), \ ++ [23] = (x), \ ++ } ++ ++/* Peri-DMAC 1 */ ++#define MAP2(x) { \ ++ [0] = (x), \ ++ [1] = (x), \ ++ [2] = (x), \ ++ [3] = (x), \ ++ [4] = (x), \ ++ [5] = (x), \ ++ [6] = (x), \ ++ [7] = (x), \ ++ [8] = (x), \ ++ [9] = (x), \ ++ [10] = (x), \ ++ [11] = (x), \ ++ [12] = (x), \ ++ [13] = (x), \ ++ [14] = (x), \ ++ [15] = (x), \ ++ [16] = (x) | DMA_CH_VALID, \ ++ [17] = (x) | DMA_CH_VALID, \ ++ [18] = (x) | DMA_CH_VALID, \ ++ [19] = (x) | DMA_CH_VALID, \ ++ [20] = (x) | DMA_CH_VALID, \ ++ [21] = (x) | DMA_CH_VALID, \ ++ [22] = (x) | DMA_CH_VALID, \ ++ [23] = (x) | DMA_CH_VALID, \ ++ } ++ ++ ++/* DMA request sources of Peri-DMAC 1 */ ++#define S3C_PDMA1_UART0CH0 0 ++#define S3C_PDMA1_UART0CH1 1 ++#define S3C_PDMA1_UART1CH0 2 ++#define S3C_PDMA1_UART1CH1 3 ++#define S3C_PDMA1_UART2CH0 4 ++#define S3C_PDMA1_UART2CH1 5 ++#define S3C_PDMA1_UART3CH0 6 ++#define S3C_PDMA1_UART3CH1 7 ++#define S3C_PDMA1_IRDA 8 ++#define S3C_PDMA1_I2S0_RX 9 ++#define S3C_PDMA1_I2S0_TX 10 ++#define S3C_PDMA1_I2S0S_TX 11 ++#define S3C_PDMA1_I2S1_RX 12 ++#define S3C_PDMA1_I2S1_TX 13 ++#define S3C_PDMA1_I2S2_RX 14 ++#define S3C_PDMA1_I2S2_TX 15 ++#define S3C_PDMA1_SPI0_RX 16 ++#define S3C_PDMA1_SPI0_TX 17 ++#define S3C_PDMA1_SPI1_RX 18 ++#define S3C_PDMA1_SPI1_TX 19 ++#define S3C_PDMA1_SPI2_RX 20 ++#define S3C_PDMA1_SPI2_TX 21 ++#define S3C_PDMA1_PCM0_RX 22 ++#define S3C_PDMA1_PCM0_TX 23 ++#define S3C_PDMA1_PCM1_RX 24 ++#define S3C_PDMA1_PCM1_TX 25 ++#define S3C_PDMA1_MSM_REQ0 26 ++#define S3C_PDMA1_MSM_REQ1 27 ++#define S3C_PDMA1_MSM_REQ2 28 ++#define S3C_PDMA1_MSM_REQ3 29 ++#define S3C_PDMA1_CG 30 ++#define S3C_PDMA1_Reserved 31 ++ ++ ++/* DMA request sources of Peri-DMAC 0 */ ++#define S3C_PDMA0_UART0CH0 0 ++#define S3C_PDMA0_UART0CH1 1 ++#define S3C_PDMA0_UART1CH0 2 ++#define S3C_PDMA0_UART1CH1 3 ++#define S3C_PDMA0_UART2CH0 4 ++#define S3C_PDMA0_UART2CH1 5 ++#define S3C_PDMA0_UART3CH0 6 ++#define S3C_PDMA0_UART3CH1 7 ++#define S3C_PDMA0_IRDA 8 ++#define S3C_PDMA0_I2S0_RX 9 ++#define S3C_PDMA0_I2S0_TX 10 ++#define S3C_PDMA0_I2S0S_TX 11 ++#define S3C_PDMA0_I2S1_RX 12 ++#define S3C_PDMA0_I2S1_TX 13 ++#define S3C_PDMA0_I2S2_RX 14 ++#define S3C_PDMA0_I2S2_TX 15 ++#define S3C_PDMA0_SPI0_RX 16 ++#define S3C_PDMA0_SPI0_TX 17 ++#define S3C_PDMA0_SPI1_RX 18 ++#define S3C_PDMA0_SPI1_TX 19 ++#define S3C_PDMA0_SPI2_RX 20 ++#define S3C_PDMA0_SPI2_TX 21 ++#define S3C_PDMA0_AC_MICIN 22 ++#define S3C_PDMA0_AC_PCMIN 23 ++#define S3C_PDMA0_AC_PCMOUT 24 ++#define S3C_PDMA0_EXTERNAL 25 ++#define S3C_PDMA0_PWM 26 ++#define S3C_PDMA0_SPDIF 27 ++#define S3C_PDMA0_HSI_TX 28 ++#define S3C_PDMA0_HSI_RX 29 ++#define S3C_PDMA0_Reserved_1 30 ++#define S3C_PDMA0_Reserved 31 ++ ++ ++/* DMA request sources of M2M-DMAC */ ++#define S3C_DMA_SEC_TX 0 ++#define S3C_DMA_SEC_RX 1 ++#define S3C_DMA_M2M 2 ++ ++ ++static struct s3c_dma_map __initdata s5pc100_dma_mappings[] = { ++ ++ [DMACH_I2S_IN] = { ++ .name = "i2s0-in", ++ .channels = MAP1(S3C_PDMA0_I2S0_RX), ++ .hw_addr.from = S3C_PDMA0_I2S0_RX, ++ }, ++ [DMACH_I2S_OUT] = { ++ .name = "i2s0-out", ++ .channels = MAP1(S3C_PDMA0_I2S0_TX), ++ .hw_addr.to = S3C_PDMA0_I2S0_TX, ++ }, ++ [DMACH_I2S1_IN] = { ++ .name = "i2s1-in", ++ .channels = MAP2(S3C_PDMA1_I2S1_RX), ++ .hw_addr.from = S3C_PDMA1_I2S1_RX, ++ }, ++ [DMACH_I2S1_OUT] = { ++ .name = "i2s1-out", ++ .channels = MAP2(S3C_PDMA1_I2S1_TX), ++ .hw_addr.to = S3C_PDMA1_I2S1_TX, ++ }, ++ [DMACH_SPI0_IN] = { ++ .name = "spi0-in", ++ .channels = MAP1(S3C_PDMA0_SPI0_RX), ++ .hw_addr.from = S3C_PDMA0_SPI0_RX, ++ }, ++ [DMACH_SPI0_OUT] = { ++ .name = "spi0-out", ++ .channels = MAP1(S3C_PDMA0_SPI0_TX), ++ .hw_addr.to = S3C_PDMA0_SPI0_TX, ++ }, ++ [DMACH_SPI1_IN] = { ++ .name = "spi1-in", ++ .channels = MAP2(S3C_PDMA1_SPI1_RX), ++ .hw_addr.from = S3C_PDMA1_SPI1_RX, ++ }, ++ [DMACH_SPI1_OUT] = { ++ .name = "spi1-out", ++ .channels = MAP2(S3C_PDMA1_SPI1_TX), ++ .hw_addr.to = S3C_PDMA1_SPI1_TX, ++ }, ++ [DMACH_AC97_PCM_OUT] = { ++ .name = "ac97-pcm-out", ++ .channels = MAP1(S3C_PDMA0_AC_PCMOUT), ++ .hw_addr.to = S3C_PDMA0_AC_PCMOUT, ++ }, ++ [DMACH_AC97_PCM_IN] = { ++ .name = "ac97-pcm-in", ++ .channels = MAP1(S3C_PDMA0_AC_PCMIN), ++ .hw_addr.from = S3C_PDMA0_AC_PCMIN, ++ }, ++ [DMACH_AC97_MIC_IN] = { ++ .name = "ac97-mic-in", ++ .channels = MAP1(S3C_PDMA0_AC_MICIN), ++ .hw_addr.from = S3C_PDMA0_AC_MICIN, ++ }, ++ [DMACH_I2S_V40_IN] = { ++ .name = "i2s-v40-in", ++ .channels = MAP1(S3C_PDMA0_HSI_RX), ++ .hw_addr.from = S3C_PDMA0_HSI_RX, ++ }, ++ [DMACH_I2S_V40_OUT] = { ++ .name = "i2s-v40-out", ++ .channels = MAP1(S3C_PDMA0_HSI_TX), ++ .hw_addr.to = S3C_PDMA0_HSI_TX, ++ }, ++ [DMACH_I2S_V50_OUT] = { ++ .name = "i2s-v50-out", ++ .channels = MAP1(S3C_PDMA1_I2S0_TX), ++ .hw_addr.to = S3C_PDMA1_I2S0_TX, ++ }, ++ [DMACH_I2S_V50_IN] = { ++ .name = "i2s-v50-in", ++ .channels = MAP1(S3C_PDMA1_I2S0_RX), ++ .hw_addr.from = S3C_PDMA1_I2S0_RX, ++ }, ++ [DMACH_ONENAND_IN] = { ++ .name = "onenand-in", ++ .channels = MAP0(S3C_DMA_M2M), ++ .hw_addr.from = 0, ++ }, ++ [DMACH_3D_M2M] = { ++ .name = "3D-M2M", ++ .channels = MAP0(S3C_DMA_M2M), ++ .hw_addr.from = 0, ++ }, ++}; ++ ++static void s5pc100_dma_select(struct s3c2410_dma_chan *chan, ++ struct s3c_dma_map *map) ++{ ++ chan->map = map; ++} ++ ++static struct s3c_dma_selection __initdata s5pc100_dma_sel = { ++ .select = s5pc100_dma_select, ++ .dcon_mask = 0, ++ .map = s5pc100_dma_mappings, ++ .map_size = ARRAY_SIZE(s5pc100_dma_mappings), ++}; ++ ++static int __init s5pc100_dma_add(struct sys_device *sysdev) ++{ ++ s3c_dma_init(S3C_DMA_CHANNELS, IRQ_MDMA, 0x20); ++ return s3c_dma_init_map(&s5pc100_dma_sel); ++} ++ ++static struct sysdev_driver s5pc100_dma_driver = { ++ .add = s5pc100_dma_add, ++}; ++ ++static int __init s5pc100_dma_init(void) ++{ ++ return sysdev_driver_register(&s5pc100_sysclass, &s5pc100_dma_driver); ++} ++ ++arch_initcall(s5pc100_dma_init); ++ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/debug-macro.S linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/debug-macro.S +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/debug-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/debug-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,39 @@ ++/* arch/arm/mach-s5pc100/include/mach/debug-macro.S ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++/* pull in the relevant register and map files. */ ++ ++#include ++#include ++ ++ /* note, for the boot process to work we have to keep the UART ++ * virtual address aligned to an 1MiB boundary for the L1 ++ * mapping the head code makes. We keep the UART virtual address ++ * aligned and add in the offset when we load the value here. ++ */ ++ ++ .macro addruart, rx ++ mrc p15, 0, \rx, c1, c0 ++ tst \rx, #1 ++ ldreq \rx, = S3C_PA_UART ++ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) ++#if CONFIG_DEBUG_S3C_UART != 0 ++ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) ++#endif ++ .endm ++ ++/* include the reset of the code which will do the work, we're only ++ * compiling for a single cpu processor type so the default of s3c2440 ++ * will be fine with us. ++ */ ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/dma.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/dma.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/dma.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/dma.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,22 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/dma.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S5PC100 - DMA support ++ */ ++ ++#ifndef __ASM_ARCH_DMA_H ++#define __ASM_ARCH_DMA_H __FILE__ ++ ++#include ++ ++#define S3C_DMA_CONTROLLERS (3) ++#define S3C_CHANNELS_PER_DMA (8) ++#define S3C_CANDIDATE_CHANNELS_PER_DMA (32) ++#define S3C_DMA_CHANNELS (S3C_DMA_CONTROLLERS*S3C_CHANNELS_PER_DMA) ++ ++#endif /* __ASM_ARCH_DMA_H */ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/entry-macro.S linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/entry-macro.S +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/entry-macro.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/entry-macro.S 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,50 @@ ++/* arch/arm/mach-s5pc100/include/mach/entry-macro.S ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * Low-level IRQ helper macros for the Samsung S5PC1XX series ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++*/ ++ ++#include ++#include ++#include ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ ldr \base, =S3C_VA_VIC0 ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ ++ @ check the vic0 ++ mov \irqnr, # S3C_IRQ_OFFSET + 31 ++ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] ++ teq \irqstat, #0 ++ ++ @ otherwise try vic1 ++ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) ++ addeq \irqnr, \irqnr, #32 ++ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] ++ teqeq \irqstat, #0 ++ ++ @ otherwise try vic2 ++ addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0) ++ addeq \irqnr, \irqnr, #32 ++ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] ++ teqeq \irqstat, #0 ++ ++ clzne \irqstat, \irqstat ++ subne \irqnr, \irqnr, \irqstat ++ .endm +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/gpio-core.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/gpio-core.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/gpio-core.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/gpio-core.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* arch/arm/mach-s5pc100/include/mach/gpio-core.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S5PC1XX - GPIO core support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_GPIO_CORE_H ++#define __ASM_ARCH_GPIO_CORE_H __FILE__ ++ ++/* currently we just include the platform support */ ++#include ++ ++#endif /* __ASM_ARCH_GPIO_CORE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/gpio.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/gpio.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/gpio.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,146 @@ ++/* arch/arm/mach-s5pc100/include/mach/gpio.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5PC100 - GPIO lib support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++#define gpio_cansleep __gpio_cansleep ++#define gpio_to_irq __gpio_to_irq ++ ++/* GPIO bank sizes */ ++#define S5PC1XX_GPIO_A0_NR (8) ++#define S5PC1XX_GPIO_A1_NR (5) ++#define S5PC1XX_GPIO_B_NR (8) ++#define S5PC1XX_GPIO_C_NR (5) ++#define S5PC1XX_GPIO_D_NR (7) ++#define S5PC1XX_GPIO_E0_NR (8) ++#define S5PC1XX_GPIO_E1_NR (6) ++#define S5PC1XX_GPIO_F0_NR (8) ++#define S5PC1XX_GPIO_F1_NR (8) ++#define S5PC1XX_GPIO_F2_NR (8) ++#define S5PC1XX_GPIO_F3_NR (4) ++#define S5PC1XX_GPIO_G0_NR (8) ++#define S5PC1XX_GPIO_G1_NR (3) ++#define S5PC1XX_GPIO_G2_NR (7) ++#define S5PC1XX_GPIO_G3_NR (7) ++#define S5PC1XX_GPIO_H0_NR (8) ++#define S5PC1XX_GPIO_H1_NR (8) ++#define S5PC1XX_GPIO_H2_NR (8) ++#define S5PC1XX_GPIO_H3_NR (8) ++#define S5PC1XX_GPIO_I_NR (8) ++#define S5PC1XX_GPIO_J0_NR (8) ++#define S5PC1XX_GPIO_J1_NR (5) ++#define S5PC1XX_GPIO_J2_NR (8) ++#define S5PC1XX_GPIO_J3_NR (8) ++#define S5PC1XX_GPIO_J4_NR (4) ++#define S5PC1XX_GPIO_K0_NR (8) ++#define S5PC1XX_GPIO_K1_NR (6) ++#define S5PC1XX_GPIO_K2_NR (8) ++#define S5PC1XX_GPIO_K3_NR (8) ++#define S5PC1XX_GPIO_MP00_NR (8) ++#define S5PC1XX_GPIO_MP01_NR (8) ++#define S5PC1XX_GPIO_MP02_NR (8) ++#define S5PC1XX_GPIO_MP03_NR (8) ++#define S5PC1XX_GPIO_MP04_NR (5) ++ ++/* GPIO bank numbes */ ++ ++/* CONFIG_S3C_GPIO_SPACE allows the user to select extra ++ * space for debugging purposes so that any accidental ++ * change from one gpio bank to another can be caught. ++*/ ++ ++#define S5PC1XX_GPIO_NEXT(__gpio) \ ++ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) ++ ++enum s3c_gpio_number { ++ S5PC1XX_GPIO_A0_START = 0, ++ S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0), ++ S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1), ++ S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B), ++ S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C), ++ S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D), ++ S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0), ++ S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1), ++ S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0), ++ S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1), ++ S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2), ++ S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3), ++ S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0), ++ S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1), ++ S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2), ++ S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3), ++ S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0), ++ S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1), ++ S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2), ++ S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3), ++ S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I), ++ S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0), ++ S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1), ++ S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2), ++ S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3), ++ S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4), ++ S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0), ++ S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1), ++ S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2), ++ S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3), ++ S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00), ++ S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01), ++ S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02), ++ S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03), ++}; ++ ++/* S5PC1XX GPIO number definitions. */ ++#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr)) ++#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr)) ++#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr)) ++#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr)) ++#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr)) ++#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr)) ++#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr)) ++#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr)) ++#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr)) ++#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr)) ++#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr)) ++#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr)) ++#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr)) ++#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr)) ++#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr)) ++#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr)) ++#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr)) ++#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr)) ++#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr)) ++#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr)) ++#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr)) ++#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr)) ++#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr)) ++#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr)) ++#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr)) ++#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr)) ++#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr)) ++#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr)) ++#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr)) ++#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr)) ++#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr)) ++#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr)) ++#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr)) ++#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr)) ++ ++/* the end of the S5PC1XX specific gpios */ ++#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) ++#define S3C_GPIO_END S5PC1XX_GPIO_END ++ ++/* define the number of gpios we need to the one after the MP04() range */ ++#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) ++ ++#include +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/hardware.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/hardware.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/hardware.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/hardware.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6400 - Hardware support ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H __FILE__ ++ ++/* currently nothing here, placeholder */ ++ ++#endif /* __ASM_ARCH_HARDWARE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/idle.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/idle.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/idle.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/idle.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,24 @@ ++/* arch/arm/mach-s5pc100/include/mach/idle.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S5PC100 CPU Idle controls ++*/ ++ ++#ifndef __ASM_ARCH_IDLE_H ++#define __ASM_ARCH_IDLE_H __FILE__ ++ ++/* This allows the over-ride of the default idle code, in case there ++ * is any other things to be done over idle (like DVS) ++*/ ++ ++extern void (*s5pc1xx_idle)(void); ++ ++extern void s5pc1xx_default_idle(void); ++ ++#endif /* __ASM_ARCH_IDLE_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/irqs.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/irqs.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/irqs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/irqs.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,20 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S5PC100 - IRQ definitions ++ */ ++ ++#ifndef __ASM_ARCH_IRQS_H ++#define __ASM_ARCH_IRQS_H __FILE__ ++ ++#ifndef __ASM_ARM_IRQ_H ++#error "Do not include this directly, instead #include " ++#endif ++ ++#include ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/map.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/map.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/map.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/map.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,182 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/map.h ++ * ++ * Copyright 2008 Samsung Electronics Co. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5PC1XX - Memory map definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_MAP_H ++#define __ASM_ARCH_MAP_H __FILE__ ++ ++#include ++ ++#define S3C_PA_UART (0xEC000000) ++#define S3C_PA_UART0 (S3C_PA_UART + 0x00) ++#define S3C_PA_UART1 (S3C_PA_UART + 0x400) ++#define S3C_PA_UART2 (S3C_PA_UART + 0x800) ++#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) ++#define S3C_UART_OFFSET (0x400) ++ ++/* See notes on UART VA mapping in debug-macro.S */ ++#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) ++ ++#define S3C_VA_UART0 S3C_VA_UARTx(0) ++#define S3C_VA_UART1 S3C_VA_UARTx(1) ++#define S3C_VA_UART2 S3C_VA_UARTx(2) ++#define S3C_VA_UART3 S3C_VA_UARTx(3) ++ ++#define S5PC1XX_PA_SYSCON (0xE0100000) ++#define S5PC1XX_VA_SYSCON S3C_VA_SYS ++#define S5PC1XX_SZ_SYSCON SZ_2M ++ ++#define S5PC1XX_PA_TIMER (0xEA000000) ++#define S5PC1XX_PA_IIC0 (0xEC100000) ++#define S5PC1XX_PA_IIC1 (0xEC200000) ++ ++#define S5PC1XX_PA_GPIO (0xE0300000) ++#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) ++#define S5PC1XX_SZ_GPIO SZ_4K ++ ++#define S5PC1XX_PA_SDRAM (0x20000000) ++#define S5PC1XX_PA_VIC0 (0xE4000000) ++#define S5PC1XX_PA_VIC1 (0xE4100000) ++#define S5PC1XX_PA_VIC2 (0xE4200000) ++ ++#define S5PC1XX_VA_SROMC S3C_VA_SROMC ++#define S5PC1XX_PA_SROMC (0xE7000000) ++#define S5PC1XX_SZ_SROMC SZ_4K ++ ++#define S5PC1XX_VA_LCD S3C_VA_LCD ++#define S5PC1XX_PA_LCD (0xEE000000) ++#define S5PC1XX_SZ_LCD SZ_1M ++ ++#define S5PC1XX_PA_G2D (0xEE800000) ++#define S5PC1XX_SZ_G2D SZ_1M ++ ++#define S5PC1XX_VA_SYSTIMER S3C_VA_SYSTIMER ++#define S5PC1XX_PA_SYSTIMER (0xEA100000) ++#define S5PC1XX_SZ_SYSTIMER SZ_1M ++ ++#define S5PC1XX_PA_ADC (0xF3000000) ++#define S5PC1XX_PA_SMC9115 (0x98000000) ++#define S5PC1XX_PA_RTC (0xEA300000) ++ ++#define S5PC1XX_PA_IIS (0xF2000000) ++#define S3C_SZ_IIS SZ_4K ++ ++#define S5PC1XX_PA_CHIPID (0xE0000000) ++#define S5PC1XX_VA_CHIPID S3C_ADDR(0x00700000) ++ ++/* NAND flash controller */ ++#define S5PC1XX_VA_NAND S3C_VA_NAND ++#define S5PC1XX_PA_NAND (0xE7200000) ++#define S5PC1XX_SZ_NAND SZ_1M ++ ++/* DMA controller */ ++#define S5PC1XX_PA_DMA (0xE8100000) ++ ++/* place VICs close together */ ++#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) ++#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) ++#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) ++ ++/* USB Host */ ++#define S5PC1XX_PA_USBHOST (0xED400000) ++#define S5PC1XX_SZ_USBHOST SZ_1M ++ ++/* USB OTG */ ++#define S5PC1XX_VA_OTG S3C_ADDR(0x00E00000) ++#define S5PC1XX_PA_OTG (0xED200000) ++#define S5PC1XX_SZ_OTG SZ_1M ++ ++/* USB OTG SFR */ ++#define S5PC1XX_VA_OTGSFR S3C_ADDR(0x00F00000) ++#define S5PC1XX_PA_OTGSFR (0xED300000) ++#define S5PC1XX_SZ_OTGSFR SZ_1M ++ ++/* FIMC */ ++#define S5PC1XX_PA_FIMC0 (0xEE200000) ++#define S5PC1XX_PA_FIMC1 (0xEE300000) ++#define S5PC1XX_PA_FIMC2 (0xEE400000) ++ ++/* HSMMC units */ ++#define S5PC1XX_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) ++#define S5PC1XX_PA_HSMMC0 S5PC1XX_PA_HSMMC(0) ++#define S5PC1XX_PA_HSMMC1 S5PC1XX_PA_HSMMC(1) ++#define S5PC1XX_PA_HSMMC2 S5PC1XX_PA_HSMMC(2) ++#define S5PC1XX_SZ_HSMMC SZ_1M ++ ++#define S3C_PA_HSMMC0 S5PC1XX_PA_HSMMC0 ++#define S3C_PA_HSMMC1 S5PC1XX_PA_HSMMC1 ++#define S3C_PA_HSMMC2 S5PC1XX_PA_HSMMC2 ++ ++#define S5PC1XX_PA_SPI(x) (0xEC300000 + ((x) * 0x100000)) ++#define S5PC1XX_SZ_SPI SZ_1M ++#define S5PC1XX_PA_SPI0 S5PC1XX_PA_SPI(0) ++#define S5PC1XX_PA_SPI1 S5PC1XX_PA_SPI(1) ++#define S5PC1XX_PA_SPI2 S5PC1XX_PA_SPI(2) ++ ++#define S5PC1XX_PA_ONENAND (0xE7100000) ++#define S5PC1XX_SZ_ONENAND SZ_1M ++ ++#define S5PC1XX_PA_KEYPAD (0xF3100000) ++#define S5PC1XX_SZ_KEYPAD SZ_4K ++ ++#define S3C_PA_IIS S5PC1XX_PA_IIS ++#define S3C_PA_ADC S5PC1XX_PA_ADC ++#define S3C_PA_DMA S5PC1XX_PA_DMA ++#define S3C_PA_RTC S5PC1XX_PA_RTC ++#define S3C_PA_KEYPAD S5PC1XX_PA_KEYPAD ++#define S3C_SZ_KEYPAD S5PC1XX_SZ_KEYPAD ++ ++/* WATCHDOG TIMER*/ ++#define S5PC1XX_PA_WDT (0xEA200000) ++#define S3C_PA_WDT S5PC1XX_PA_WDT ++ ++/* MFC V4.0 */ ++#define S5PC1XX_PA_MFC (0xF1000000) ++#define S5PC1XX_SZ_MFC SZ_4K ++ ++/* JPEG */ ++#define S5PC1XX_PA_JPEG (0xEE500000) ++#define S5PC1XX_SZ_JPEG SZ_1M ++ ++/* AC97 */ ++#define S5PC1XX_PA_AC97 (0xF2300000) ++#define S5PC1XX_SZ_AC97 SZ_1M ++ ++/* G3D */ ++#define S5PC1XX_PA_G3D (0xEF000000) ++#define S5PC1XX_SZ_G3D SZ_16M ++ ++/* Rotator */ ++#define S5PC1XX_PA_ROTATOR (0xEE100000) ++#define S5PC1XX_SZ_ROTATOR SZ_1M ++ ++/* MIPI CSIS */ ++#define S5PC1XX_PA_CSIS (0xECC00000) ++#define S5PC1XX_SZ_CSIS SZ_1M ++ ++/* compatibiltiy defines. */ ++#define S3C_SZ_HSMMC S5PC1XX_SZ_HSMMC ++ ++#define S3C_PA_TIMER S5PC1XX_PA_TIMER ++#define S3C_PA_IIC S5PC1XX_PA_IIC0 ++#define S3C_PA_IIC1 S5PC1XX_PA_IIC1 ++ ++#define S3C_VA_OTG S5PC1XX_VA_OTG ++#define S3C_PA_OTG S5PC1XX_PA_OTG ++#define S3C_SZ_OTG S5PC1XX_SZ_OTG ++ ++#define S3C_VA_OTGSFR S5PC1XX_VA_OTGSFR ++#define S3C_PA_OTGSFR S5PC1XX_PA_OTGSFR ++#define S3C_SZ_OTGSFR S5PC1XX_SZ_OTGSFR ++ ++#endif /* __ASM_ARCH_6400_MAP_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/memory.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/memory.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/memory.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/memory.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,22 @@ ++/* arch/arm/mach-s5pc100/include/mach/memory.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_MEMORY_H ++#define __ASM_ARCH_MEMORY_H ++ ++#define PHYS_OFFSET UL(0x20000000) ++#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) ++ ++#define __virt_to_bus(x) __virt_to_phys(x) ++#define __bus_to_virt(x) __phys_to_virt(x) ++ ++#endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/regs-irq.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/regs-irq.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/regs-irq.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/regs-irq.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,277 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5PC1XX - IRQ register definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_REGS_IRQ_H ++#define __ASM_ARCH_REGS_IRQ_H __FILE__ ++ ++#include ++#include ++/* interrupt controller */ ++#define S5PC100_VIC0REG(x) ((x) + S3C_VA_VIC0) ++#define S5PC100_VIC1REG(x) ((x) + S3C_VA_VIC1) ++#define S5PC100_VIC2REG(x) ((x) + S3C_VA_VIC2) ++ ++#define S5PC100_VIC0IRQSTATUS S5PC100_VIC0REG(0x000) ++#define S5PC100_VIC0FIQSTATUS S5PC100_VIC0REG(0x004) ++#define S5PC100_VIC0RAWINTR S5PC100_VIC0REG(0x008) ++#define S5PC100_VIC0INTSELECT S5PC100_VIC0REG(0x00C) ++#define S5PC100_VIC0INTENABLE S5PC100_VIC0REG(0x010) ++#define S5PC100_VIC0INTENCLEAR S5PC100_VIC0REG(0x014) ++#define S5PC100_VIC0SOFTINT S5PC100_VIC0REG(0x018) ++#define S5PC100_VIC0SOFTINTCLEAR S5PC100_VIC0REG(0x01C) ++#define S5PC100_VIC0PROTECTION S5PC100_VIC0REG(0x020) ++#define S5PC100_VIC0SWPRIORITYMASK S5PC100_VIC0REG(0x024) ++#define S5PC100_VIC0PRIORITYDAISY S5PC100_VIC0REG(0x028) ++#define S5PC100_VIC0VECTADDR0 S5PC100_VIC0REG(0x100) ++#define S5PC100_VIC0VECTADDR1 S5PC100_VIC0REG(0x104) ++#define S5PC100_VIC0VECTADDR2 S5PC100_VIC0REG(0x108) ++#define S5PC100_VIC0VECTADDR3 S5PC100_VIC0REG(0x10C) ++#define S5PC100_VIC0VECTADDR4 S5PC100_VIC0REG(0x110) ++#define S5PC100_VIC0VECTADDR5 S5PC100_VIC0REG(0x114) ++#define S5PC100_VIC0VECTADDR6 S5PC100_VIC0REG(0x118) ++#define S5PC100_VIC0VECTADDR7 S5PC100_VIC0REG(0x11C) ++#define S5PC100_VIC0VECTADDR8 S5PC100_VIC0REG(0x120) ++#define S5PC100_VIC0VECTADDR9 S5PC100_VIC0REG(0x124) ++#define S5PC100_VIC0VECTADDR10 S5PC100_VIC0REG(0x128) ++#define S5PC100_VIC0VECTADDR11 S5PC100_VIC0REG(0x12C) ++#define S5PC100_VIC0VECTADDR12 S5PC100_VIC0REG(0x130) ++#define S5PC100_VIC0VECTADDR13 S5PC100_VIC0REG(0x134) ++#define S5PC100_VIC0VECTADDR14 S5PC100_VIC0REG(0x138) ++#define S5PC100_VIC0VECTADDR15 S5PC100_VIC0REG(0x13C) ++#define S5PC100_VIC0VECTADDR16 S5PC100_VIC0REG(0x140) ++#define S5PC100_VIC0VECTADDR17 S5PC100_VIC0REG(0x144) ++#define S5PC100_VIC0VECTADDR18 S5PC100_VIC0REG(0x148) ++#define S5PC100_VIC0VECTADDR19 S5PC100_VIC0REG(0x14C) ++#define S5PC100_VIC0VECTADDR20 S5PC100_VIC0REG(0x150) ++#define S5PC100_VIC0VECTADDR21 S5PC100_VIC0REG(0x154) ++#define S5PC100_VIC0VECTADDR22 S5PC100_VIC0REG(0x158) ++#define S5PC100_VIC0VECTADDR23 S5PC100_VIC0REG(0x15C) ++#define S5PC100_VIC0VECTADDR24 S5PC100_VIC0REG(0x160) ++#define S5PC100_VIC0VECTADDR25 S5PC100_VIC0REG(0x164) ++#define S5PC100_VIC0VECTADDR26 S5PC100_VIC0REG(0x168) ++#define S5PC100_VIC0VECTADDR27 S5PC100_VIC0REG(0x16C) ++#define S5PC100_VIC0VECTADDR28 S5PC100_VIC0REG(0x170) ++#define S5PC100_VIC0VECTADDR29 S5PC100_VIC0REG(0x174) ++#define S5PC100_VIC0VECTADDR30 S5PC100_VIC0REG(0x178) ++#define S5PC100_VIC0VECTADDR31 S5PC100_VIC0REG(0x17C) ++#define S5PC100_VIC0VECPRIORITY0 S5PC100_VIC0REG(0x200) ++#define S5PC100_VIC0VECTPRIORITY1 S5PC100_VIC0REG(0x204) ++#define S5PC100_VIC0VECTPRIORITY2 S5PC100_VIC0REG(0x208) ++#define S5PC100_VIC0VECTPRIORITY3 S5PC100_VIC0REG(0x20C) ++#define S5PC100_VIC0VECTPRIORITY4 S5PC100_VIC0REG(0x210) ++#define S5PC100_VIC0VECTPRIORITY5 S5PC100_VIC0REG(0x214) ++#define S5PC100_VIC0VECTPRIORITY6 S5PC100_VIC0REG(0x218) ++#define S5PC100_VIC0VECTPRIORITY7 S5PC100_VIC0REG(0x21C) ++#define S5PC100_VIC0VECTPRIORITY8 S5PC100_VIC0REG(0x220) ++#define S5PC100_VIC0VECTPRIORITY9 S5PC100_VIC0REG(0x224) ++#define S5PC100_VIC0VECTPRIORITY10 S5PC100_VIC0REG(0x228) ++#define S5PC100_VIC0VECTPRIORITY11 S5PC100_VIC0REG(0x22C) ++#define S5PC100_VIC0VECTPRIORITY12 S5PC100_VIC0REG(0x230) ++#define S5PC100_VIC0VECTPRIORITY13 S5PC100_VIC0REG(0x234) ++#define S5PC100_VIC0VECTPRIORITY14 S5PC100_VIC0REG(0x238) ++#define S5PC100_VIC0VECTPRIORITY15 S5PC100_VIC0REG(0x23C) ++#define S5PC100_VIC0VECTPRIORITY16 S5PC100_VIC0REG(0x240) ++#define S5PC100_VIC0VECTPRIORITY17 S5PC100_VIC0REG(0x244) ++#define S5PC100_VIC0VECTPRIORITY18 S5PC100_VIC0REG(0x248) ++#define S5PC100_VIC0VECTPRIORITY19 S5PC100_VIC0REG(0x24C) ++#define S5PC100_VIC0VECTPRIORITY20 S5PC100_VIC0REG(0x250) ++#define S5PC100_VIC0VECTPRIORITY21 S5PC100_VIC0REG(0x254) ++#define S5PC100_VIC0VECTPRIORITY22 S5PC100_VIC0REG(0x258) ++#define S5PC100_VIC0VECTPRIORITY23 S5PC100_VIC0REG(0x25C) ++#define S5PC100_VIC0VECTPRIORITY24 S5PC100_VIC0REG(0x260) ++#define S5PC100_VIC0VECTPRIORITY25 S5PC100_VIC0REG(0x264) ++#define S5PC100_VIC0VECTPRIORITY26 S5PC100_VIC0REG(0x268) ++#define S5PC100_VIC0VECTPRIORITY27 S5PC100_VIC0REG(0x26C) ++#define S5PC100_VIC0VECTPRIORITY28 S5PC100_VIC0REG(0x270) ++#define S5PC100_VIC0VECTPRIORITY29 S5PC100_VIC0REG(0x274) ++#define S5PC100_VIC0VECTPRIORITY30 S5PC100_VIC0REG(0x278) ++#define S5PC100_VIC0VECTPRIORITY31 S5PC100_VIC0REG(0x27C) ++#define S5PC100_VIC0ADDRESS S5PC100_VIC0REG(0xF00) ++#define S5PC100_VIC0PERIPHID0 S5PC100_VIC0REG(0xFE0) ++#define S5PC100_VIC0PERIPHID1 S5PC100_VIC0REG(0xFE4) ++#define S5PC100_VIC0PERIPHID2 S5PC100_VIC0REG(0xFE8) ++#define S5PC100_VIC0PERIPHID3 S5PC100_VIC0REG(0xFEC) ++#define S5PC100_VIC0PCELLID0 S5PC100_VIC0REG(0xFF0) ++#define S5PC100_VIC0PCELLID1 S5PC100_VIC0REG(0xFF4) ++#define S5PC100_VIC0PCELLID2 S5PC100_VIC0REG(0xFF8) ++#define S5PC100_VIC0PCELLID3 S5PC100_VIC0REG(0xFFC) ++#define S5PC100_VIC1IRQSTATUS S5PC100_VIC1REG(0x000) ++#define S5PC100_VIC1FIQSTATUS S5PC100_VIC1REG(0x004) ++#define S5PC100_VIC1RAWINTR S5PC100_VIC1REG(0x008) ++#define S5PC100_VIC1INTSELECT S5PC100_VIC1REG(0x00C) ++#define S5PC100_VIC1INTENABLE S5PC100_VIC1REG(0x010) ++#define S5PC100_VIC1INTENCLEAR S5PC100_VIC1REG(0x014) ++#define S5PC100_VIC1SOFTINT S5PC100_VIC1REG(0x018) ++#define S5PC100_VIC1SOFTINTCLEAR S5PC100_VIC1REG(0x01C) ++#define S5PC100_VIC1PROTECTION S5PC100_VIC1REG(0x020) ++#define S5PC100_VIC1SWPRIORITYMASK S5PC100_VIC1REG(0x024) ++#define S5PC100_VIC1PRIORITYDAISY S5PC100_VIC1REG(0x028) ++#define S5PC100_VIC1VECTADDR0 S5PC100_VIC1REG(0x100) ++#define S5PC100_VIC1VECTADDR1 S5PC100_VIC1REG(0x104) ++#define S5PC100_VIC1VECTADDR2 S5PC100_VIC1REG(0x108) ++#define S5PC100_VIC1VECTADDR3 S5PC100_VIC1REG(0x10C) ++#define S5PC100_VIC1VECTADDR4 S5PC100_VIC1REG(0x110) ++#define S5PC100_VIC1VECTADDR5 S5PC100_VIC1REG(0x114) ++#define S5PC100_VIC1VECTADDR6 S5PC100_VIC1REG(0x118) ++#define S5PC100_VIC1VECTADDR7 S5PC100_VIC1REG(0x11C) ++#define S5PC100_VIC1VECTADDR8 S5PC100_VIC1REG(0x120) ++#define S5PC100_VIC1VECTADDR9 S5PC100_VIC1REG(0x124) ++#define S5PC100_VIC1VECTADDR10 S5PC100_VIC1REG(0x128) ++#define S5PC100_VIC1VECTADDR11 S5PC100_VIC1REG(0x12C) ++#define S5PC100_VIC1VECTADDR12 S5PC100_VIC1REG(0x130) ++#define S5PC100_VIC1VECTADDR13 S5PC100_VIC1REG(0x134) ++#define S5PC100_VIC1VECTADDR14 S5PC100_VIC1REG(0x138) ++#define S5PC100_VIC1VECTADDR15 S5PC100_VIC1REG(0x13C) ++#define S5PC100_VIC1VECTADDR16 S5PC100_VIC1REG(0x140) ++#define S5PC100_VIC1VECTADDR17 S5PC100_VIC1REG(0x144) ++#define S5PC100_VIC1VECTADDR18 S5PC100_VIC1REG(0x148) ++#define S5PC100_VIC1VECTADDR19 S5PC100_VIC1REG(0x14C) ++#define S5PC100_VIC1VECTADDR20 S5PC100_VIC1REG(0x150) ++#define S5PC100_VIC1VECTADDR21 S5PC100_VIC1REG(0x154) ++#define S5PC100_VIC1VECTADDR22 S5PC100_VIC1REG(0x158) ++#define S5PC100_VIC1VECTADDR23 S5PC100_VIC1REG(0x15C) ++#define S5PC100_VIC1VECTADDR24 S5PC100_VIC1REG(0x160) ++#define S5PC100_VIC1VECTADDR25 S5PC100_VIC1REG(0x164) ++#define S5PC100_VIC1VECTADDR26 S5PC100_VIC1REG(0x168) ++#define S5PC100_VIC1VECTADDR27 S5PC100_VIC1REG(0x16C) ++#define S5PC100_VIC1VECTADDR28 S5PC100_VIC1REG(0x170) ++#define S5PC100_VIC1VECTADDR29 S5PC100_VIC1REG(0x174) ++#define S5PC100_VIC1VECTADDR30 S5PC100_VIC1REG(0x178) ++#define S5PC100_VIC1VECTADDR31 S5PC100_VIC1REG(0x17C) ++#define S5PC100_VIC1VECPRIORITY0 S5PC100_VIC1REG(0x200) ++#define S5PC100_VIC1VECTPRIORITY1 S5PC100_VIC1REG(0x204) ++#define S5PC100_VIC1VECTPRIORITY2 S5PC100_VIC1REG(0x208) ++#define S5PC100_VIC1VECTPRIORITY3 S5PC100_VIC1REG(0x20C) ++#define S5PC100_VIC1VECTPRIORITY4 S5PC100_VIC1REG(0x210) ++#define S5PC100_VIC1VECTPRIORITY5 S5PC100_VIC1REG(0x214) ++#define S5PC100_VIC1VECTPRIORITY6 S5PC100_VIC1REG(0x218) ++#define S5PC100_VIC1VECTPRIORITY7 S5PC100_VIC1REG(0x21C) ++#define S5PC100_VIC1VECTPRIORITY8 S5PC100_VIC1REG(0x220) ++#define S5PC100_VIC1VECTPRIORITY9 S5PC100_VIC1REG(0x224) ++#define S5PC100_VIC1VECTPRIORITY10 S5PC100_VIC1REG(0x228) ++#define S5PC100_VIC1VECTPRIORITY11 S5PC100_VIC1REG(0x22C) ++#define S5PC100_VIC1VECTPRIORITY12 S5PC100_VIC1REG(0x230) ++#define S5PC100_VIC1VECTPRIORITY13 S5PC100_VIC1REG(0x234) ++#define S5PC100_VIC1VECTPRIORITY14 S5PC100_VIC1REG(0x238) ++#define S5PC100_VIC1VECTPRIORITY15 S5PC100_VIC1REG(0x23C) ++#define S5PC100_VIC1VECTPRIORITY16 S5PC100_VIC1REG(0x240) ++#define S5PC100_VIC1VECTPRIORITY17 S5PC100_VIC1REG(0x244) ++#define S5PC100_VIC1VECTPRIORITY18 S5PC100_VIC1REG(0x248) ++#define S5PC100_VIC1VECTPRIORITY19 S5PC100_VIC1REG(0x24C) ++#define S5PC100_VIC1VECTPRIORITY20 S5PC100_VIC1REG(0x250) ++#define S5PC100_VIC1VECTPRIORITY21 S5PC100_VIC1REG(0x254) ++#define S5PC100_VIC1VECTPRIORITY22 S5PC100_VIC1REG(0x258) ++#define S5PC100_VIC1VECTPRIORITY23 S5PC100_VIC1REG(0x25C) ++#define S5PC100_VIC1VECTPRIORITY24 S5PC100_VIC1REG(0x260) ++#define S5PC100_VIC1VECTPRIORITY25 S5PC100_VIC1REG(0x264) ++#define S5PC100_VIC1VECTPRIORITY26 S5PC100_VIC1REG(0x268) ++#define S5PC100_VIC1VECTPRIORITY27 S5PC100_VIC1REG(0x26C) ++#define S5PC100_VIC1VECTPRIORITY28 S5PC100_VIC1REG(0x270) ++#define S5PC100_VIC1VECTPRIORITY29 S5PC100_VIC1REG(0x274) ++#define S5PC100_VIC1VECTPRIORITY30 S5PC100_VIC1REG(0x278) ++#define S5PC100_VIC1VECTPRIORITY31 S5PC100_VIC1REG(0x27C) ++#define S5PC100_VIC1ADDRESS S5PC100_VIC1REG(0xF00) ++#define S5PC100_VIC1PERIPHID0 S5PC100_VIC1REG(0xFE0) ++#define S5PC100_VIC1PERIPHID1 S5PC100_VIC1REG(0xFE4) ++#define S5PC100_VIC1PERIPHID2 S5PC100_VIC1REG(0xFE8) ++#define S5PC100_VIC1PCELLID0 S5PC100_VIC1REG(0xFF0) ++#define S5PC100_VIC1PCELLID1 S5PC100_VIC1REG(0xFF4) ++#define S5PC100_VIC1PCELLID2 S5PC100_VIC1REG(0xFF8) ++#define S5PC100_VIC1PCELLID3 S5PC100_VIC1REG(0xFFC) ++#define S5PC100_VIC2IRQSTATUS S5PC100_VIC2REG(0x000) ++#define S5PC100_VIC2FIQSTATUS S5PC100_VIC2REG(0x004) ++#define S5PC100_VIC2RAWINTR S5PC100_VIC2REG(0x008) ++#define S5PC100_VIC2INTSELECT S5PC100_VIC2REG(0x00C) ++#define S5PC100_VIC2INTENABLE S5PC100_VIC2REG(0x010) ++#define S5PC100_VIC2INTENCLEAR S5PC100_VIC2REG(0x014) ++#define S5PC100_VIC2SOFTINT S5PC100_VIC2REG(0x018) ++#define S5PC100_VIC2SOFTINTCLEAR S5PC100_VIC2REG(0x01C) ++#define S5PC100_VIC2PROTECTION S5PC100_VIC2REG(0x020) ++#define S5PC100_VIC2SWPRIORITYMASK S5PC100_VIC2REG(0x024) ++#define S5PC100_VIC2PRIORITYDAISY S5PC100_VIC2REG(0x028) ++#define S5PC100_VIC2VECTADDR0 S5PC100_VIC2REG(0x100) ++#define S5PC100_VIC2VECTADDR1 S5PC100_VIC2REG(0x104) ++#define S5PC100_VIC2VECTADDR2 S5PC100_VIC2REG(0x108) ++#define S5PC100_VIC2VECTADDR3 S5PC100_VIC2REG(0x10C) ++#define S5PC100_VIC2VECTADDR4 S5PC100_VIC2REG(0x110) ++#define S5PC100_VIC2VECTADDR5 S5PC100_VIC2REG(0x114) ++#define S5PC100_VIC2VECTADDR6 S5PC100_VIC2REG(0x118) ++#define S5PC100_VIC2VECTADDR7 S5PC100_VIC2REG(0x11C) ++#define S5PC100_VIC2VECTADDR8 S5PC100_VIC2REG(0x120) ++#define S5PC100_VIC2VECTADDR9 S5PC100_VIC2REG(0x124) ++#define S5PC100_VIC2VECTADDR10 S5PC100_VIC2REG(0x128) ++#define S5PC100_VIC2VECTADDR11 S5PC100_VIC2REG(0x12C) ++#define S5PC100_VIC2VECTADDR12 S5PC100_VIC2REG(0x130) ++#define S5PC100_VIC2VECTADDR13 S5PC100_VIC2REG(0x134) ++#define S5PC100_VIC2VECTADDR14 S5PC100_VIC2REG(0x138) ++#define S5PC100_VIC2VECTADDR15 S5PC100_VIC2REG(0x13C) ++#define S5PC100_VIC2VECTADDR16 S5PC100_VIC2REG(0x140) ++#define S5PC100_VIC2VECTADDR17 S5PC100_VIC2REG(0x144) ++#define S5PC100_VIC2VECTADDR18 S5PC100_VIC2REG(0x148) ++#define S5PC100_VIC2VECTADDR19 S5PC100_VIC2REG(0x14C) ++#define S5PC100_VIC2VECTADDR20 S5PC100_VIC2REG(0x150) ++#define S5PC100_VIC2VECTADDR21 S5PC100_VIC2REG(0x154) ++#define S5PC100_VIC2VECTADDR22 S5PC100_VIC2REG(0x158) ++#define S5PC100_VIC2VECTADDR23 S5PC100_VIC2REG(0x15C) ++#define S5PC100_VIC2VECTADDR24 S5PC100_VIC2REG(0x160) ++#define S5PC100_VIC2VECTADDR25 S5PC100_VIC2REG(0x164) ++#define S5PC100_VIC2VECTADDR26 S5PC100_VIC2REG(0x168) ++#define S5PC100_VIC2VECTADDR27 S5PC100_VIC2REG(0x16C) ++#define S5PC100_VIC2VECTADDR28 S5PC100_VIC2REG(0x170) ++#define S5PC100_VIC2VECTADDR29 S5PC100_VIC2REG(0x174) ++#define S5PC100_VIC2VECTADDR30 S5PC100_VIC2REG(0x178) ++#define S5PC100_VIC2VECTADDR31 S5PC100_VIC2REG(0x17C) ++#define S5PC100_VIC2VECPRIORITY0 S5PC100_VIC2REG(0x200) ++#define S5PC100_VIC2VECTPRIORITY1 S5PC100_VIC2REG(0x204) ++#define S5PC100_VIC2VECTPRIORITY2 S5PC100_VIC2REG(0x208) ++#define S5PC100_VIC2VECTPRIORITY3 S5PC100_VIC2REG(0x20C) ++#define S5PC100_VIC2VECTPRIORITY4 S5PC100_VIC2REG(0x210) ++#define S5PC100_VIC2VECTPRIORITY5 S5PC100_VIC2REG(0x214) ++#define S5PC100_VIC2VECTPRIORITY6 S5PC100_VIC2REG(0x218) ++#define S5PC100_VIC2VECTPRIORITY7 S5PC100_VIC2REG(0x21C) ++#define S5PC100_VIC2VECTPRIORITY8 S5PC100_VIC2REG(0x220) ++#define S5PC100_VIC2VECTPRIORITY9 S5PC100_VIC2REG(0x224) ++#define S5PC100_VIC2VECTPRIORITY10 S5PC100_VIC2REG(0x228) ++#define S5PC100_VIC2VECTPRIORITY11 S5PC100_VIC2REG(0x22C) ++#define S5PC100_VIC2VECTPRIORITY12 S5PC100_VIC2REG(0x230) ++#define S5PC100_VIC2VECTPRIORITY13 S5PC100_VIC2REG(0x234) ++#define S5PC100_VIC2VECTPRIORITY14 S5PC100_VIC2REG(0x238) ++#define S5PC100_VIC2VECTPRIORITY15 S5PC100_VIC2REG(0x23C) ++#define S5PC100_VIC2VECTPRIORITY16 S5PC100_VIC2REG(0x240) ++#define S5PC100_VIC2VECTPRIORITY17 S5PC100_VIC2REG(0x244) ++#define S5PC100_VIC2VECTPRIORITY18 S5PC100_VIC2REG(0x248) ++#define S5PC100_VIC2VECTPRIORITY19 S5PC100_VIC2REG(0x24C) ++#define S5PC100_VIC2VECTPRIORITY20 S5PC100_VIC2REG(0x250) ++#define S5PC100_VIC2VECTPRIORITY21 S5PC100_VIC2REG(0x254) ++#define S5PC100_VIC2VECTPRIORITY22 S5PC100_VIC2REG(0x258) ++#define S5PC100_VIC2VECTPRIORITY23 S5PC100_VIC2REG(0x25C) ++#define S5PC100_VIC2VECTPRIORITY24 S5PC100_VIC2REG(0x260) ++#define S5PC100_VIC2VECTPRIORITY25 S5PC100_VIC2REG(0x264) ++#define S5PC100_VIC2VECTPRIORITY26 S5PC100_VIC2REG(0x268) ++#define S5PC100_VIC2VECTPRIORITY27 S5PC100_VIC2REG(0x26C) ++#define S5PC100_VIC2VECTPRIORITY28 S5PC100_VIC2REG(0x270) ++#define S5PC100_VIC2VECTPRIORITY29 S5PC100_VIC2REG(0x274) ++#define S5PC100_VIC2VECTPRIORITY30 S5PC100_VIC2REG(0x278) ++#define S5PC100_VIC2VECTPRIORITY31 S5PC100_VIC2REG(0x27C) ++#define S5PC100_VIC2ADDRESS S5PC100_VIC2REG(0xF00) ++#define S5PC100_VIC2PERIPHID0 S5PC100_VIC2REG(0xFE0) ++#define S5PC100_VIC2PERIPHID1 S5PC100_VIC2REG(0xFE4) ++#define S5PC100_VIC2PERIPHID2 S5PC100_VIC2REG(0xFE8) ++#define S5PC100_VIC2PERIPHID3 S5PC100_VIC2REG(0xFEC) ++#define S5PC100_VIC2PCELLID0 S5PC100_VIC2REG(0xFF0) ++#define S5PC100_VIC2PCELLID1 S5PC100_VIC2REG(0xFF4) ++#define S5PC100_VIC2PCELLID2 S5PC100_VIC2REG(0xFF8) ++#define S5PC100_VIC2PCELLID3 S5PC100_VIC2REG(0xFFC) ++ ++#endif /* __ASM_ARCH_REGS_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/regs-mem.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/regs-mem.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/regs-mem.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/regs-mem.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,86 @@ ++/* arch/arm/mach-s5pc100/include/mach/regs-mem.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S5PC100 Memory Control register definitions ++*/ ++ ++#ifndef __ASM_ARM_MEMREGS_H ++#define __ASM_ARM_MEMREGS_H ++ ++#ifndef S5PC1XX_MEMREG ++#define S5PC1XX_MEMREG(x) (S5PC1XX_VA_SROMC + (x)) ++#endif ++ ++ ++/* Bank Idle Cycle Control Registers 0-5 */ ++#define S5PC1XX_SROM_BW S5PC1XX_MEMREG(0x00) ++ ++#define S5PC1XX_SROM_BC0 S5PC1XX_MEMREG(0x04) ++#define S5PC1XX_SROM_BC1 S5PC1XX_MEMREG(0x08) ++#define S5PC1XX_SROM_BC2 S5PC1XX_MEMREG(0x0C) ++#define S5PC1XX_SROM_BC3 S5PC1XX_MEMREG(0x10) ++#define S5PC1XX_SROM_BC4 S5PC1XX_MEMREG(0x14) ++#define S5PC1XX_SROM_BC5 S5PC1XX_MEMREG(0x18) ++ ++/* SROM BW */ ++#define S5PC1XX_SROM_BW_DATA_WIDTH0_8BIT (0 << 0) ++#define S5PC1XX_SROM_BW_DATA_WIDTH0_16BIT (1 << 0) ++#define S5PC1XX_SROM_BW_DATA_WIDTH0_MASK (1 << 0) ++ ++#define S5PC1XX_SROM_BW_WAIT_ENABLE0_DISABLE (0 << 2) ++#define S5PC1XX_SROM_BW_WAIT_ENABLE0_ENABLE (1 << 2) ++#define S5PC1XX_SROM_BW_WAIT_ENABLE0_MASK (1 << 2) ++ ++#define S5PC1XX_SROM_BW_BYTE_ENABLE0_DISABLE (0 << 3) ++#define S5PC1XX_SROM_BW_BYTE_ENABLE0_ENABLE (1 << 3) ++#define S5PC1XX_SROM_BW_BYTE_ENABLE0_MASK (1 << 3) ++ ++#define S5PC1XX_SROM_BW_DATA_WIDTH1_8BIT (0 << 4) ++#define S5PC1XX_SROM_BW_DATA_WIDTH1_16BIT (1 << 4) ++#define S5PC1XX_SROM_BW_DATA_WIDTH1_MASK (1 << 4) ++ ++#define S5PC1XX_SROM_BW_WAIT_ENABLE1_DISABLE (0 << 6) ++#define S5PC1XX_SROM_BW_WAIT_ENABLE1_ENABLE (1 << 6) ++#define S5PC1XX_SROM_BW_WAIT_ENABLE1_MASK (1 << 6) ++ ++#define S5PC1XX_SROM_BW_BYTE_ENABLE1_DISABLE (0 << 7) ++#define S5PC1XX_SROM_BW_BYTE_ENABLE1_ENABLE (1 << 7) ++#define S5PC1XX_SROM_BW_BYTE_ENABLE1_MASK (1 << 7) ++ ++#define S5PC1XX_SROM_BW_DATA_WIDTH2_8BIT (0 << 8) ++#define S5PC1XX_SROM_BW_DATA_WIDTH2_16BIT (1 << 8) ++#define S5PC1XX_SROM_BW_DATA_WIDTH2_MASK (1 << 8) ++ ++#define S5PC1XX_SROM_BW_DATA_WIDTH3_8BIT (0 << 12) ++#define S5PC1XX_SROM_BW_DATA_WIDTH3_16BIT (1 << 12) ++#define S5PC1XX_SROM_BW_DATA_WIDTH3_MASK (1 << 12) ++ ++#define S5PC1XX_SROM_BW_ADDR_MODE3_HWORD_ADDR (0 << 13) ++#define S5PC1XX_SROM_BW_ADDR_MODE3_BYTE_ADDR (1 << 13) ++#define S5PC1XX_SROM_BW_ADDR_MODE3_MASK (1 << 13) ++ ++#define S5PC1XX_SROM_BW_WAIT_ENABLE3_DISABLE (0 << 14) ++#define S5PC1XX_SROM_BW_WAIT_ENABLE3_ENABLE (1 << 14) ++#define S5PC1XX_SROM_BW_WAIT_ENABLE3_MASK (1 << 14) ++ ++#define S5PC1XX_SROM_BW_BYTE_ENABLE3_DISABLE (0 << 15) ++#define S5PC1XX_SROM_BW_BYTE_ENABLE3_ENABLE (1 << 15) ++#define S5PC1XX_SROM_BW_BYTE_ENABLE3_MASK (1 << 15) ++ ++/* SROM BCn */ ++#define S5PC1XX_SROM_BCn_TACS(x) (x << 28) ++#define S5PC1XX_SROM_BCn_TCOS(x) (x << 24) ++#define S5PC1XX_SROM_BCn_TACC(x) (x << 16) ++#define S5PC1XX_SROM_BCn_TCOH(x) (x << 12) ++#define S5PC1XX_SROM_BCn_TCAH(x) (x << 8) ++#define S5PC1XX_SROM_BCn_TACP(x) (x << 4) ++#define S5PC1XX_SROM_BCn_PMC_NORMAL (0 << 0) ++#define S5PC1XX_SROM_BCn_PMC_4 (1 << 0) ++ ++#endif /* __ASM_ARM_MEMREGS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/system.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/system.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/system.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/system.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,36 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/system.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S5PC100 - system implementation ++ */ ++ ++ #include ++ ++#ifndef __ASM_ARCH_SYSTEM_H ++#define __ASM_ARCH_SYSTEM_H __FILE__ ++ ++void (*s5pc1xx_idle)(void); ++ ++void s5pc1xx_default_idle(void) ++{ ++ printk("default idle function\n"); ++} ++ ++static void arch_idle(void) ++{ ++ if(s5pc1xx_idle != NULL) ++ (s5pc1xx_idle)(); ++ else ++ s5pc1xx_default_idle(); ++} ++ ++static void arch_reset(char mode) ++{ ++ /* nothing here yet */ ++} ++ ++#endif /* __ASM_ARCH_IRQ_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/tick.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/tick.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/tick.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/tick.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,29 @@ ++/* linux/arch/arm/mach-s5pc100/include/mach/tick.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5PC1XX - Timer tick support definitions ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_TICK_H ++#define __ASM_ARCH_TICK_H __FILE__ ++ ++/* note, the timer interrutps turn up in 2 places, the vic and then ++ * the timer block. We take the VIC as the base at the moment. ++ */ ++static inline u32 s5pc1xx_ostimer_pending(void) ++{ ++ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); ++ return pend & 1 << (IRQ_SYSTIMER - S5PC1XX_IRQ_VIC0(0)); ++} ++ ++#define TICK_MAX (0xffffffff) ++ ++#endif /* __ASM_ARCH_6400_TICK_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/uncompress.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/uncompress.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/uncompress.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/uncompress.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,26 @@ ++/* arch/arm/mach-s5pc100/include/mach/uncompress.h ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * http://armlinux.simtec.co.uk/ ++ * Ben Dooks ++ * ++ * S5PC100 - uncompress code ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_UNCOMPRESS_H ++#define __ASM_ARCH_UNCOMPRESS_H ++ ++#include ++#include ++ ++static void arch_detect_cpu(void) ++{ ++ /* we do not need to do any cpu detection here at the moment. */ ++} ++ ++#endif /* __ASM_ARCH_UNCOMPRESS_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/include/mach/usb-control.h linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/usb-control.h +--- linux-2.6.28/arch/arm/mach-s5pc100/include/mach/usb-control.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/include/mach/usb-control.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,41 @@ ++/* arch/arm/mach-s3c2410/include/mach/usb-control.h ++ * ++ * Copyright (c) 2004 Simtec Electronics ++ * Ben Dooks ++ * ++ * S3C2410 - usb port information ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifndef __ASM_ARCH_USBCONTROL_H ++#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s5pc100/include/mach/usb-control.h" ++ ++#define S3C_HCDFLG_USED (1) ++ ++struct s3c2410_hcd_port { ++ unsigned char flags; ++ unsigned char power; ++ unsigned char oc_status; ++ unsigned char oc_changed; ++}; ++ ++struct s3c2410_hcd_info { ++ struct usb_hcd *hcd; ++ struct s3c2410_hcd_port port[2]; ++ ++ void (*power_control)(int port, int to); ++ void (*enable_oc)(struct s3c2410_hcd_info *, int on); ++ void (*report_oc)(struct s3c2410_hcd_info *, int ports); ++}; ++ ++static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) ++{ ++ if (info->report_oc != NULL) { ++ (info->report_oc)(info, ports); ++ } ++} ++ ++#endif /*__ASM_ARCH_USBCONTROL_H */ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/leds-s5pc100.c linux-2.6.28.6/arch/arm/mach-s5pc100/leds-s5pc100.c +--- linux-2.6.28/arch/arm/mach-s5pc100/leds-s5pc100.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/leds-s5pc100.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,120 @@ ++/* ++ * linux/arch/arm/mach-s5pc100/leds-s5pc100.c ++ * ++ * Copyright 2008 by Samsung Electronics Incorporated ++ * ++ * There are 16 LEDs on the debug board (all green); four may be used ++ * for logical 'green', 'amber', 'red', and 'blue' (after "claiming"). ++ * ++ * The "surfer" expansion board and H2 sample board also have two-color ++ * green+red LEDs (in parallel), used here for timer and idle indicators. ++ */ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "leds.h" ++ ++#define LED0 S5PC1XX_GPH1(4) ++#define LED1 S5PC1XX_GPH1(5) ++#define LED2 S5PC1XX_GPH1(6) ++#define LED3 S5PC1XX_GPH1(7) ++ ++#define LED_STATE_ENABLED 1<<0 ++#define LED_STATE_CLAIMED 1<<1 ++#define LED_TIMER_ON 1<<2 ++#define LED_IDLE 1<<3 ++ ++ ++void s5pc100_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ static u16 led_state, hw_led_state; ++ ++ local_irq_save(flags); ++ ++ if (!(led_state & LED_STATE_ENABLED) && evt != led_start) ++ goto done; ++ ++ switch (evt) { ++ case led_start: ++ led_state |= LED_STATE_ENABLED; ++ break; ++ ++ case led_stop: ++ case led_halted: ++ /* all leds off during suspend or shutdown */ ++ led_state &= ~LED_STATE_ENABLED; ++ break; ++ ++ case led_claim: ++ led_state |= LED_STATE_CLAIMED; ++ hw_led_state = 0; ++ break; ++ ++ case led_release: ++ led_state &= ~LED_STATE_CLAIMED; ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: ++ led_state ^= LED_TIMER_ON; ++ ++ if (led_state & LED_TIMER_ON) ++ gpio_set_value(LED0, 1); ++ else { ++ gpio_set_value(LED0, 0); ++ } ++ ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ case led_idle_start: ++ gpio_set_value(LED1, 1); ++ break; ++ ++ case led_idle_end: ++ gpio_set_value(LED1, 0); ++ break; ++#endif ++ ++ case led_green_on: ++ break; ++ case led_green_off: ++ break; ++ ++ case led_amber_on: ++ break; ++ case led_amber_off: ++ break; ++ ++ case led_red_on: ++ break; ++ case led_red_off: ++ break; ++ ++ case led_blue_on: ++ break; ++ case led_blue_off: ++ break; ++ ++ default: ++ break; ++ } ++ ++done: ++ local_irq_restore(flags); ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/leds.c linux-2.6.28.6/arch/arm/mach-s5pc100/leds.c +--- linux-2.6.28/arch/arm/mach-s5pc100/leds.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/leds.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,91 @@ ++/* ++ * linux/arch/arm/mach-s5pc100/leds.c ++ * ++ * S5PC100 LEDs dispatcher ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include "leds.h" ++ ++static irqreturn_t eint11_switch(int irq, void *dev_id) ++{ ++ ++ printk("EINT11 interrupt occures!!!\n"); ++ return IRQ_HANDLED; ++} ++ ++ ++static int __init ++s5pc100_leds_init(void) ++{ ++ if (machine_is_smdkc100()) ++ leds_event = s5pc100_leds_event; ++ else ++ return -1; ++ ++ if (machine_is_smdkc100()) ++ { ++ gpio_request(S5PC1XX_GPH1(4), "GPH1"); ++ gpio_direction_output(S5PC1XX_GPH1(4), 1); ++ if(gpio_get_value(S5PC1XX_GPH1(4)) == 0) ++ { ++ printk(KERN_WARNING "LED: can't set GPH1(4) to output mode\n"); ++ } ++ ++ gpio_request(S5PC1XX_GPH1(5), "GPH1"); ++ gpio_direction_output(S5PC1XX_GPH1(5), 1); ++ if(gpio_get_value(S5PC1XX_GPH1(5)) == 0) ++ { ++ printk(KERN_WARNING "LED: can't set GPH1(5) to output mode\n"); ++ } ++ ++ gpio_request(S5PC1XX_GPH1(6), "GPH1"); ++ gpio_direction_output(S5PC1XX_GPH1(6), 1); ++ if(gpio_get_value(S5PC1XX_GPH1(6)) == 0) ++ { ++ printk(KERN_WARNING "LED: can't set GPH1(6) to output mode\n"); ++ } ++ ++ gpio_request(S5PC1XX_GPH1(7), "GPH1"); ++ gpio_direction_output(S5PC1XX_GPH1(7), 1); ++ if(gpio_get_value(S5PC1XX_GPH1(7)) == 0) ++ { ++ printk(KERN_WARNING "LED: can't set GPH1(7) to output mode\n"); ++ } ++ } ++ ++ /* Get irqs */ ++ set_irq_type(IRQ_EINT11, IRQ_TYPE_EDGE_FALLING); ++ s3c_gpio_setpull(S5PC1XX_GPH1(3), S3C_GPIO_PULL_NONE); ++ if (request_irq(IRQ_EINT11, eint11_switch, IRQF_DISABLED, "EINT11", NULL)) { ++ return -EIO; ++ } ++ ++ leds_event(led_start); ++ return 0; ++} ++ ++__initcall(s5pc100_leds_init); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/leds.h linux-2.6.28.6/arch/arm/mach-s5pc100/leds.h +--- linux-2.6.28/arch/arm/mach-s5pc100/leds.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/leds.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1 @@ ++extern void s5pc100_leds_event(led_event_t evt); +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/mach-smdkc100.c linux-2.6.28.6/arch/arm/mach-s5pc100/mach-smdkc100.c +--- linux-2.6.28/arch/arm/mach-s5pc100/mach-smdkc100.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/mach-smdkc100.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,473 @@ ++/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c ++ * ++ * Copyright 2008 Openmoko, Inc. ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_USB_SUPPORT ++#include ++#include ++#include ++ ++/* S3C_USB_CLKSRC 0: EPLL 1: CLK_48M */ ++#define S3C_USB_CLKSRC 1 ++#define OTGH_PHY_CLK_VALUE (0x22) /* UTMI Interface, otg_phy input clk 12Mhz Oscillator */ ++#endif ++ ++#if defined(CONFIG_PM) ++#include ++#endif ++ ++#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK ++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB ++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE ++ ++extern struct sys_timer s5pc1xx_timer; ++extern void s5pc1xx_reserve_bootmem(void); ++ ++static struct s3c24xx_uart_clksrc smdkc100_serial_clocks[] = { ++#if defined(CONFIG_SERIAL_S5PC1XX_HSUART) ++/* HS-UART Clock using SCLK */ ++ [0] = { ++ .name = "uclk1", ++ .divisor = 1, ++ .min_baud = 0, ++ .max_baud = 0, ++ }, ++#else ++ [0] = { ++ .name = "pclk", ++ .divisor = 1, ++ .min_baud = 0, ++ .max_baud = 0, ++ }, ++#endif ++}; ++ ++static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { ++ [0] = { ++ .hwport = 0, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ .clocks = smdkc100_serial_clocks, ++ .clocks_size = ARRAY_SIZE(smdkc100_serial_clocks), ++ }, ++ [1] = { ++ .hwport = 1, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ .clocks = smdkc100_serial_clocks, ++ .clocks_size = ARRAY_SIZE(smdkc100_serial_clocks), ++ }, ++ [2] = { ++ .hwport = 2, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ .clocks = smdkc100_serial_clocks, ++ .clocks_size = ARRAY_SIZE(smdkc100_serial_clocks), ++ }, ++ [3] = { ++ .hwport = 3, ++ .flags = 0, ++ .ucon = S3C64XX_UCON_DEFAULT, ++ .ulcon = S3C64XX_ULCON_DEFAULT, ++ .ufcon = S3C64XX_UFCON_DEFAULT, ++ .clocks = smdkc100_serial_clocks, ++ .clocks_size = ARRAY_SIZE(smdkc100_serial_clocks), ++ }, ++}; ++ ++struct map_desc smdkc100_iodesc[] = {}; ++ ++static struct platform_device *smdkc100_devices[] __initdata = { ++ &s3c_device_lcd, ++ &s3c_device_nand, ++ &s3c_device_onenand, ++ &s3c_device_keypad, ++ &s3c_device_ts, ++ &s3c_device_adc, ++ &s3c_device_rtc, ++ &s3c_device_smc911x, ++ &s3c_device_i2c0, ++ &s3c_device_i2c1, ++ &s3c_device_usb, ++ &s3c_device_usbgadget, ++ &s3c_device_usb_otghcd, ++ &s3c_device_hsmmc0, ++ &s3c_device_hsmmc1, ++ &s3c_device_spi0, ++ &s3c_device_spi1, ++ &s3c_device_mfc, ++ &s3c_device_jpeg, ++ &s3c_device_fimc0, ++ &s3c_device_fimc1, ++ &s3c_device_fimc2, ++ &s3c_device_ac97, ++ &s3c_device_wdt, ++ &s3c_device_g3d, ++ &s3c_device_g2d, ++ &s3c_device_rotator, ++ &s3c_device_csis, ++#if defined(CONFIG_TIMER_PWM) ++ &s3c_device_timer[0], ++ &s3c_device_timer[1], ++#endif ++}; ++ ++ ++static struct s3c_ts_mach_info s3c_ts_platform __initdata = { ++ .delay = 10000, ++ .presc = 49, ++ .oversampling_shift = 2, ++ .resol_bit = 12, ++ .s3c_adc_con = ADC_TYPE_2, ++}; ++ ++static struct s3c_adc_mach_info s3c_adc_platform __initdata = { ++ /* s5pc100 supports 12-bit resolution */ ++ .delay = 10000, ++ .presc = 49, ++ .resolution = 12, ++}; ++ ++static struct i2c_board_info i2c_devs0[] __initdata = { ++ { I2C_BOARD_INFO("24c08", 0x50), }, ++}; ++ ++static struct i2c_board_info i2c_devs1[] __initdata = { ++ { I2C_BOARD_INFO("24c128", 0x57), }, ++}; ++ ++#if defined(CONFIG_TIMER_PWM) ++static struct platform_pwm_backlight_data smdk_backlight_data = { ++ .pwm_id = 0, ++ .max_brightness = 255, ++ .dft_brightness = 255, ++ .pwm_period_ns = 78770, ++}; ++ ++static struct platform_device smdk_backlight_device = { ++ .name = "pwm-backlight", ++ .dev = { ++ .parent = &s3c_device_timer[0].dev, ++ .platform_data = &smdk_backlight_data, ++ }, ++}; ++ ++static void __init smdk_backlight_register(void) ++{ ++ int ret = platform_device_register(&smdk_backlight_device); ++ if (ret) ++ printk(KERN_ERR "smdk: failed to register backlight device: %d\n", ret); ++} ++#else ++#define smdk_backlight_register() do { } while (0) ++#endif ++ ++static void __init smdkc100_map_io(void) ++{ ++ s3c_device_nand.name = "s5pc100-nand"; ++ s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc)); ++ s3c24xx_init_clocks(0); ++ s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); ++ s5pc1xx_reserve_bootmem(); ++} ++ ++static void __init smdkc100_smc911x_set(void) ++{ ++ unsigned int tmp; ++ ++ tmp = __raw_readl(S5PC1XX_GPK0CON); ++ tmp &=~S5PC1XX_GPK0_3_MASK; ++ tmp |=(S5PC1XX_GPK0_3_SROM_CSn3); ++ __raw_writel(tmp, S5PC1XX_GPK0CON); ++ ++ tmp = __raw_readl(S5PC1XX_SROM_BW); ++ tmp &= ~(S5PC1XX_SROM_BW_BYTE_ENABLE3_MASK | S5PC1XX_SROM_BW_WAIT_ENABLE3_MASK | ++ S5PC1XX_SROM_BW_ADDR_MODE3_MASK | S5PC1XX_SROM_BW_DATA_WIDTH3_MASK); ++ tmp |= S5PC1XX_SROM_BW_DATA_WIDTH3_16BIT; ++ ++ __raw_writel(tmp, S5PC1XX_SROM_BW); ++ ++ __raw_writel((0x0<<28)|(0x4<<24)|(0xd<<16)|(0x1<<12)|(0x4<<8)|(0x6<<4)|(0x0<<0), S5PC1XX_SROM_BC3); ++ ++ __raw_writel(S5PC1XX_SROM_BCn_TACS(1) | S5PC1XX_SROM_BCn_TCOS(0) | ++ S5PC1XX_SROM_BCn_TACC(27) | S5PC1XX_SROM_BCn_TCOH(0) | ++ S5PC1XX_SROM_BCn_TCAH(2) | S5PC1XX_SROM_BCn_TACP(0) | ++ S5PC1XX_SROM_BCn_PMC_NORMAL, S5PC1XX_SROM_BC3); ++} ++ ++static void __init smdkc100_machine_init(void) ++{ ++ s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info; ++ s3c_device_onenand.dev.platform_data = &s3c_onenand_data; ++ ++ smdkc100_smc911x_set(); ++ ++ s3c_ts_set_platdata(&s3c_ts_platform); ++ s3c_adc_set_platdata(&s3c_adc_platform); ++ ++ /* i2c */ ++ s3c_i2c0_set_platdata(NULL); ++ s3c_i2c1_set_platdata(NULL); ++ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); ++ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); ++ ++ /* fimc */ ++ s3c_fimc0_set_platdata(NULL); ++ s3c_fimc1_set_platdata(NULL); ++ s3c_fimc2_set_platdata(NULL); ++ ++ /* mipi-csi2 */ ++ s3c_csis_set_platdata(NULL); ++ ++#ifdef CONFIG_VIDEO_FIMC ++ s3c_fimc_reset_camera(); ++#endif ++ ++ /* Setting up the HS-MMC clock for 133MHz using doutMpll */ ++ writel((readl(S5P_CLK_DIV3) & ~(0xfff << 0)), S5P_CLK_DIV3); ++ ++ platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); ++ ++#if defined(CONFIG_PM) ++ s5pc1xx_pm_init(); ++#endif ++ smdk_backlight_register(); ++} ++ ++MACHINE_START(SMDKC100, "SMDKC100") ++ /* Maintainer: Ben Dooks */ ++ .phys_io = S3C_PA_UART & 0xfff00000, ++ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, ++ .boot_params = S5PC1XX_PA_SDRAM + 0x100, ++ ++ .init_irq = s5pc100_init_irq, ++ .map_io = smdkc100_map_io, ++ .init_machine = smdkc100_machine_init, ++ .timer = &s5pc1xx_timer, ++MACHINE_END ++ ++ ++#ifdef CONFIG_USB_SUPPORT ++/* Initializes OTG Phy. */ ++void otg_phy_init(void) { ++ writel(readl(S5P_OTHERS)|S5P_OTHERS_USB_SIG_MASK, S5P_OTHERS); ++ writel(0x0, S3C_USBOTG_PHYPWR); /* Power up */ ++ writel(OTGH_PHY_CLK_VALUE, S3C_USBOTG_PHYCLK); ++ writel(0x7, S3C_USBOTG_RSTCON); ++ ++ udelay(50); ++ writel(0x0, S3C_USBOTG_RSTCON); ++ udelay(50); ++} ++EXPORT_SYMBOL(otg_phy_init); ++ ++/* USB Control request data struct must be located here for DMA transfer */ ++struct usb_ctrlrequest usb_ctrl __attribute__((aligned(8))); ++EXPORT_SYMBOL(usb_ctrl); ++ ++/* OTG PHY Power Off */ ++void otg_phy_off(void) { ++ writel(readl(S3C_USBOTG_PHYCLK) | (0X1 << 4), S3C_USBOTG_PHYCLK); ++ writel(readl(S5P_OTHERS)&~S5P_OTHERS_USB_SIG_MASK, S5P_OTHERS); ++} ++EXPORT_SYMBOL(otg_phy_off); ++ ++void usb_host_clk_en(void) { ++ struct clk *otg_clk; ++ ++ switch (S3C_USB_CLKSRC) { ++ case 0: /* epll clk */ ++ /* Setting the epll clk to 48 MHz, P=3, M=96, S=3 */ ++ writel((readl(S5P_EPLL_CON) & ~(S5P_EPLL_MASK)) | (S5P_EPLL_EN \ ++ | S5P_EPLLVAL(96,3,3)), S5P_EPLL_CON); ++ writel((readl(S5P_CLK_SRC0) | S5P_CLKSRC0_EPLL_MASK), S5P_CLK_SRC0); ++ writel((readl(S5P_CLK_SRC1)& ~S5P_CLKSRC1_UHOST_MASK), S5P_CLK_SRC1); ++ ++ /* USB host clock divider ratio is 1 */ ++ writel((readl(S5P_CLK_DIV2)& ~S5P_CLKDIV2_UHOST_MASK), S5P_CLK_DIV2); ++ break; ++ ++ case 1: /* oscillator 12M clk */ ++ otg_clk = clk_get(NULL, "otg"); ++ clk_enable(otg_clk); ++ otg_phy_init(); ++ writel((readl(S5P_CLK_SRC1) | S5P_CLKSRC1_CLK48M_MASK) \ ++ | S5P_CLKSRC1_UHOST_MASK, S5P_CLK_SRC1); ++ ++ //USB host colock divider ratio is 1 ++ writel(readl(S5P_CLK_DIV2)& ~S5P_CLKDIV2_UHOST_MASK, S5P_CLK_DIV2); ++ break; ++ /* Add other clock sources here */ ++ ++ default: ++ printk(KERN_INFO "Unknown USB Host Clock Source\n"); ++ BUG(); ++ break; ++ } ++ ++ writel(readl(S5P_CLKGATE_D10)|S5P_CLKGATE_D10_USBHOST, S5P_CLKGATE_D10); ++ writel(readl(S5P_SCLKGATE0)|S5P_CLKGATE_SCLK0_USBHOST, S5P_SCLKGATE0); ++ ++} ++ ++EXPORT_SYMBOL(usb_host_clk_en); ++#endif ++ ++#if defined(CONFIG_RTC_DRV_S3C) ++/* RTC common Function for samsung APs*/ ++unsigned int s3c_rtc_set_bit_byte(void __iomem *base, uint offset, uint val) ++{ ++ writeb(val, base + offset); ++ ++ return 0; ++} ++ ++unsigned int s3c_rtc_read_alarm_status(void __iomem *base) ++{ ++ return 1; ++} ++ ++void s3c_rtc_set_pie(void __iomem *base, uint to) ++{ ++ unsigned int tmp; ++ ++ tmp = readw(base + S3C2410_RTCCON) & ~S3C_RTCCON_TICEN; ++ ++ if (to) ++ tmp |= S3C_RTCCON_TICEN; ++ ++ writew(tmp, base + S3C2410_RTCCON); ++} ++ ++void s3c_rtc_set_freq_regs(void __iomem *base, uint freq, uint s3c_freq) ++{ ++ unsigned int tmp; ++ ++ tmp = readw(base + S3C2410_RTCCON) & (S3C_RTCCON_TICEN | S3C2410_RTCCON_RTCEN ); ++ writew(tmp, base + S3C2410_RTCCON); ++ s3c_freq = freq; ++ tmp = (32768 / freq)-1; ++ writel(tmp, base + S3C2410_TICNT); ++} ++ ++void s3c_rtc_enable_set(struct platform_device *pdev,void __iomem *base, int en) ++{ ++ unsigned int tmp; ++ ++ if (!en) { ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp & ~ (S3C2410_RTCCON_RTCEN | S3C_RTCCON_TICEN), base + S3C2410_RTCCON); ++ } else { ++ /* re-enable the device, and check it is ok */ ++ if ((readw(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){ ++ dev_info(&pdev->dev, "rtc disabled, re-enabling\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON); ++ } ++ ++ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){ ++ dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON); ++ } ++ ++ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){ ++ dev_info(&pdev->dev, "removing RTCCON_CLKRST\n"); ++ ++ tmp = readw(base + S3C2410_RTCCON); ++ writew(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON); ++ } ++ } ++} ++#endif ++ ++#if defined(CONFIG_KEYPAD_S3C) || defined (CONFIG_KEYPAD_S3C_MODULE) ++void s3c_setup_keypad_cfg_gpio(int rows, int columns) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ end = S5PC1XX_GPH3(rows); ++ ++ /* Set all the necessary GPH2 pins to special-function 0 */ ++ for (gpio = S5PC1XX_GPH3(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ end = S5PC1XX_GPH2(columns); ++ ++ /* Set all the necessary GPK pins to special-function 0 */ ++ for (gpio = S5PC1XX_GPH2(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++} ++ ++EXPORT_SYMBOL(s3c_setup_keypad_cfg_gpio); ++#endif +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/pm.c linux-2.6.28.6/arch/arm/mach-s5pc100/pm.c +--- linux-2.6.28/arch/arm/mach-s5pc100/pm.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/pm.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,107 @@ ++/* linux/arch/arm/mach-s5pc100/pm.c ++ * ++ * Copyright (c) 2006 Samsung Electronics ++ * ++ * ++ * S3C6410 (and compatible) Power Manager (Suspend-To-RAM) support ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#define DBG(fmt...) printk(KERN_DEBUG fmt) ++ ++void s5pc100_cpu_suspend(void) ++{ ++ unsigned long tmp; ++ ++ /* issue the standby signal into the pm unit. Note, we ++ * issue a write-buffer drain just in case */ ++ ++ tmp = 0; ++/* ++ * MCR p15,0,,c7,c10,5 ; Data Memory Barrier Operation. ++ * MCR p15,0,,c7,c10,4 ; Data Synchronization Barrier operation. ++ * MCR p15,0,,c7,c0,4 ; Wait For Interrupt. ++ */ ++ ++ asm("b 1f\n\t" ++ ".align 5\n\t" ++ "1:\n\t" ++ "mcr p15, 0, %0, c7, c10, 5\n\t" ++ "mcr p15, 0, %0, c7, c10, 4\n\t" ++ ".word 0xe320f003" :: "r" (tmp)); ++ ++ /* we should never get past here */ ++ ++ panic("sleep resumed to originator?"); ++} ++ ++static void s5pc100_pm_prepare(void) ++{ ++ ++} ++ ++static int s5pc100_pm_add(struct sys_device *sysdev) ++{ ++ pm_cpu_prep = s5pc100_pm_prepare; ++ pm_cpu_sleep = s5pc100_cpu_suspend; ++ ++ return 0; ++} ++ ++static struct sleep_save s5pc100_sleep[] = { ++ ++}; ++ ++static int s5pc100_pm_suspend(struct sys_device *dev, pm_message_t state) ++{ ++ s5pc1xx_pm_do_save(s5pc100_sleep, ARRAY_SIZE(s5pc100_sleep)); ++ return 0; ++} ++ ++static int s5pc100_pm_resume(struct sys_device *dev) ++{ ++ s5pc1xx_pm_do_restore(s5pc100_sleep, ARRAY_SIZE(s5pc100_sleep)); ++ return 0; ++} ++ ++static struct sysdev_driver s5pc100_pm_driver = { ++ .add = s5pc100_pm_add, ++ .resume = s5pc100_pm_resume, ++}; ++ ++static __init int s5pc100_pm_drvinit(void) ++{ ++ return sysdev_driver_register(&s5pc100_sysclass, &s5pc100_pm_driver); ++} ++ ++arch_initcall(s5pc100_pm_drvinit); ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mach-s5pc100/setup-sdhci.c linux-2.6.28.6/arch/arm/mach-s5pc100/setup-sdhci.c +--- linux-2.6.28/arch/arm/mach-s5pc100/setup-sdhci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mach-s5pc100/setup-sdhci.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,118 @@ ++/* linux/arch/arm/mach-s3c6410/setup-sdhci.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ ++char *s3c6410_hsmmc_clksrcs[4] = { ++ [0] = "mmc_bus", ++ [1] = "mmc_bus", ++ [2] = "hsmmc", ++}; ++ ++void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* Channel 0 supports 1,4 and 8-bit bus width */ ++ end = S5PC1XX_GPG0(2 + width); ++ ++ /* Set all the necessary GPG0 ins to special-function 2 */ ++ for (gpio = S5PC1XX_GPG0(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ /* GPG1 chip Detect */ ++ s3c_gpio_setpull(S5PC1XX_GPG1(2), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S5PC1XX_GPG1(2), S3C_GPIO_SFN(2)); ++} ++ ++void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, ++ void __iomem *r, ++ struct mmc_ios *ios, ++ struct mmc_card *card) ++{ ++ u32 ctrl2, ctrl3 = 0; ++ ++ /* don't need to alter anything acording to card-type */ ++ ++ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); ++ ++ /* No need for any delay values in the HS-MMC interface */ ++ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); ++ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; ++ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | ++ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | ++ S3C_SDHCI_CTRL2_DFCNT_NONE | ++ S3C_SDHCI_CTRL2_ENCLKOUTHOLD); ++ ++ writel(ctrl2, r + S3C_SDHCI_CONTROL2); ++ writel(ctrl3, r + S3C_SDHCI_CONTROL3); ++} ++ ++void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* Channel 1 supports 1 and 4-bit bus width */ ++ end = S5PC1XX_GPG2(2 + width); ++ ++ /* Set all the necessary GPG2 pins to special-function 2 */ ++ for (gpio = S5PC1XX_GPG2(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ /* GPG2 chip Detect */ ++ s3c_gpio_setpull(S5PC1XX_GPG2(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S5PC1XX_GPG2(6), S3C_GPIO_SFN(2)); ++} ++ ++void s3c6410_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) ++{ ++ unsigned int gpio; ++ unsigned int end; ++ ++ /* Channel 1 supports 1 and 4-bit bus width */ ++ end = S5PC1XX_GPG3(2 + width); ++ ++ /* Set all the necessary GPG3 pins to special-function 2 */ ++ for (gpio = S5PC1XX_GPG3(0); gpio < end; gpio++) { ++ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); ++ } ++ ++ /* GPG3 chip Detect */ ++ s3c_gpio_setpull(S5PC1XX_GPG3(6), S3C_GPIO_PULL_UP); ++ s3c_gpio_cfgpin(S5PC1XX_GPG3(6), S3C_GPIO_SFN(2)); ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/mm/Kconfig linux-2.6.28.6/arch/arm/mm/Kconfig +--- linux-2.6.28/arch/arm/mm/Kconfig 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/mm/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -183,14 +183,14 @@ + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \ + MACH_VERSATILE_AB || ARCH_OMAP730 || \ + ARCH_OMAP16XX || MACH_REALVIEW_EB || \ +- ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ ++ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_S3C24A0 || \ + ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ + ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ + ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ + ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \ + ARCH_OMAP730 || ARCH_OMAP16XX || \ +- ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ ++ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_S3C24A0 || \ + ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ + ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ + ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ +@@ -400,9 +400,10 @@ + # ARMv6 + config CPU_V6 + bool "Support ARM V6 processor" +- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 ++ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || ARCH_S3C64XX || ARCH_S5P64XX + default y if ARCH_MX3 + default y if ARCH_MSM ++ default y if (ARCH_S3C64XX || ARCH_S5P64XX) + select CPU_32v6 + select CPU_ABRT_EV6 + select CPU_PABRT_NOIFAR +@@ -428,7 +429,8 @@ + # ARMv7 + config CPU_V7 + bool "Support ARM V7 processor" +- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3 ++ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3 || ARCH_S5PC1XX ++ default y if ARCH_S5PC1XX + select CPU_32v6K + select CPU_32v7 + select CPU_ABRT_EV7 +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-omap/cpu-omap.c linux-2.6.28.6/arch/arm/plat-omap/cpu-omap.c +--- linux-2.6.28/arch/arm/plat-omap/cpu-omap.c 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-omap/cpu-omap.c 2009-04-30 09:36:37.000000000 +0200 +@@ -22,7 +22,7 @@ + #include + #include + +-#include ++//#include + #include + + #define VERY_HI_RATE 900000000 +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/Kconfig linux-2.6.28.6/arch/arm/plat-s3c/Kconfig +--- linux-2.6.28/arch/arm/plat-s3c/Kconfig 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/Kconfig 2009-04-30 09:36:37.000000000 +0200 +@@ -6,8 +6,8 @@ + + config PLAT_S3C + bool +- depends on ARCH_S3C2410 +- default y if ARCH_S3C2410 ++ depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5P64XX || ARCH_S5PC1XX ++ default y + select NO_IOPORT + help + Base platform code for any Samsung S3C device +@@ -16,24 +16,24 @@ + + config CPU_LLSERIAL_S3C2410_ONLY + bool +- depends on ARCH_S3C2410 ++ depends on PLAT_S3C + default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 + + config CPU_LLSERIAL_S3C2440_ONLY + bool +- depends on ARCH_S3C2410 ++ depends on PLAT_S3C + default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 + + config CPU_LLSERIAL_S3C2410 + bool +- depends on ARCH_S3C2410 ++ depends on PLAT_S3C + help + Selected if there is an S3C2410 (or register compatible) serial + low-level implementation needed + + config CPU_LLSERIAL_S3C2440 + bool +- depends on ARCH_S3C2410 ++ depends on PLAT_S3C + help + Selected if there is an S3C2440 (or register compatible) serial + low-level implementation needed +@@ -102,3 +102,97 @@ + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. ++ ++config SPLIT_ROOT_FILESYSTEM ++ bool "S3C MTD has 4 partitions" ++ depends on (ARCH_S3C64XX || ARCH_S5PC1XX || ARCH_S5P64XX) && MTD ++ help ++ Choose this if you want to use 4 mtd partitions ++ ++# options for gpiolib support ++ ++config S3C_GPIO_SPACE ++ int "Space between gpio banks" ++ default 0 ++ help ++ Add a number of spare GPIO entries between each bank for debugging ++ purposes. This allows any problems where an counter overflows from ++ one bank to another to be caught, at the expense of using a little ++ more memory. ++ ++config S3C_GPIO_TRACK ++ bool ++ help ++ Internal configuration option to enable the s3c specific gpio ++ chip tracking if the platform requires it. ++ ++config S3C_GPIO_PULL_UPDOWN ++ bool ++ help ++ Internal configuration to enable the correct GPIO pull helper ++ ++config S3C_GPIO_PULL_DOWN ++ bool ++ help ++ Internal configuration to enable the correct GPIO pull helper ++ ++config S3C_GPIO_PULL_UP ++ bool ++ help ++ Internal configuration to enable the correct GPIO pull helper ++ ++config S3C_GPIO_CFG_S3C24XX ++ bool ++ help ++ Internal configuration to enable S3C24XX style GPIO configuration ++ functions. ++ ++config S3C_GPIO_CFG_S3C64XX ++ bool ++ help ++ Internal configuration to enable S3C64XX style GPIO configuration ++ functions. ++ ++config S3C_GPIO_CFG_S5PC1XX ++ bool ++ help ++ Internal configuration to enable S5PC1XX style GPIO configuration ++ functions. ++# device definitions to compile in ++ ++config S3C_DEV_HSMMC ++ bool ++ depends on PLAT_S3C ++ help ++ Compile in platform device definitions for HSMMC code ++ ++config S3C_DEV_HSMMC1 ++ bool ++ depends on PLAT_S3C ++ help ++ Compile in platform device definitions for HSMMC channel 1 ++ ++config S3C_DEV_HSMMC2 ++ bool ++ depends on PLAT_S3C ++ help ++ Compile in platform device definitions for HSMMC channel 2 ++ ++config S3C_DEV_I2C1 ++ bool ++ depends on PLAT_S3C ++ help ++ Compile in platform device definitions for I2C channel 1 ++ ++config S3C_DMA_PL080 ++ bool ++ depends on PLAT_S3C ++ help ++ PL080 DMA supported ++ ++config S3C_DMA_PL330 ++ bool ++ depends on PLAT_S3C ++ help ++ PL330 DMA supported ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/Makefile linux-2.6.28.6/arch/arm/plat-s3c/Makefile +--- linux-2.6.28/arch/arm/plat-s3c/Makefile 2008-12-25 00:26:37.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/Makefile 2009-04-30 09:36:37.000000000 +0200 +@@ -1,3 +1,32 @@ +-# dummy makefile, currently just including asm/arm/plat-s3c/include/plat ++# arch/arm/plat-s3c/Makefile ++# ++# Copyright 2008 Simtec Electronics ++# ++# Licensed under GPLv2 + +-obj-n := dummy.o ++obj-y := ++obj-m := ++obj-n := ++obj- := ++ ++# Core support for all Samsung SoCs ++ ++obj-y += init.o ++ifndef CONFIG_ARCH_S5PC1XX ++obj-y += time.o ++endif ++obj-y += clock.o ++obj-y += pwm-clock.o ++obj-y += gpio.o ++obj-y += gpio-config.o ++obj-$(CONFIG_S3C_DMA_PL080) += dma-pl080.o ++obj-$(CONFIG_S3C_DMA_PL330) += dma-pl330.o ++ ++# devices ++obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o ++obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o ++obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o ++obj-y += dev-i2c0.o ++obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o ++obj-$(CONFIG_TOUCHSCREEN_S3C) += dev-ts.o ++obj-$(CONFIG_SND_S3C6410_SOC_I2S) += dev-i2s.o +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/clock.c linux-2.6.28.6/arch/arm/plat-s3c/clock.c +--- linux-2.6.28/arch/arm/plat-s3c/clock.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/clock.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,446 @@ ++/* linux/arch/arm/plat-s3c/clock.c ++ * ++ * Copyright (c) 2004-2005 Simtec Electronics ++ * Ben Dooks ++ * ++ * S3C24XX Core clock control support ++ * ++ * Based on, and code from linux/arch/arm/mach-versatile/clock.c ++ ** ++ ** Copyright (C) 2004 ARM Limited. ++ ** Written by Deep Blue Solutions Limited. ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static LIST_HEAD(clocks); ++ ++/* We originally used an mutex here, but some contexts (see resume) ++ * are calling functions such as clk_set_parent() with IRQs disabled ++ * causing an BUG to be triggered. ++ */ ++DEFINE_SPINLOCK(clocks_lock); ++ ++/* enable and disable calls for use with the clk struct */ ++ ++static int clk_null_enable(struct clk *clk, int enable) ++{ ++ return 0; ++} ++ ++/* Clock API calls */ ++ ++struct clk *clk_get(struct device *dev, const char *id) ++{ ++ struct clk *p; ++ struct clk *clk = ERR_PTR(-ENOENT); ++ int idno; ++ ++ if (dev == NULL || dev->bus != &platform_bus_type) ++ idno = -1; ++ else ++ idno = to_platform_device(dev)->id; ++ ++ spin_lock(&clocks_lock); ++ ++ list_for_each_entry(p, &clocks, list) { ++ if (p->id == idno && ++ strcmp(id, p->name) == 0 && ++ try_module_get(p->owner)) { ++ clk = p; ++ break; ++ } ++ } ++ ++ /* check for the case where a device was supplied, but the ++ * clock that was being searched for is not device specific */ ++ ++ if (IS_ERR(clk)) { ++ list_for_each_entry(p, &clocks, list) { ++ if (p->id == -1 && strcmp(id, p->name) == 0 && ++ try_module_get(p->owner)) { ++ clk = p; ++ break; ++ } ++ } ++ } ++ ++ spin_unlock(&clocks_lock); ++ return clk; ++} ++ ++void clk_put(struct clk *clk) ++{ ++ module_put(clk->owner); ++} ++ ++int clk_enable(struct clk *clk) ++{ ++ if (IS_ERR(clk) || clk == NULL) ++ return -EINVAL; ++ ++ clk_enable(clk->parent); ++ ++ spin_lock(&clocks_lock); ++ ++ if ((clk->usage++) == 0) ++ (clk->enable)(clk, 1); ++ ++ spin_unlock(&clocks_lock); ++ return 0; ++} ++ ++void clk_disable(struct clk *clk) ++{ ++ if (IS_ERR(clk) || clk == NULL) ++ return; ++ ++ spin_lock(&clocks_lock); ++ ++ if ((--clk->usage) == 0) ++ (clk->enable)(clk, 0); ++ ++ spin_unlock(&clocks_lock); ++ clk_disable(clk->parent); ++} ++ ++ ++unsigned long clk_get_rate(struct clk *clk) ++{ ++ if (IS_ERR(clk)) ++ return 0; ++ ++ if (clk->rate != 0) ++ return clk->rate; ++ ++ if (clk->get_rate != NULL) ++ return (clk->get_rate)(clk); ++ ++ if (clk->parent != NULL) ++ return clk_get_rate(clk->parent); ++ ++ return clk->rate; ++} ++ ++long clk_round_rate(struct clk *clk, unsigned long rate) ++{ ++ if (!IS_ERR(clk) && clk->round_rate) ++ return (clk->round_rate)(clk, rate); ++ ++ return rate; ++} ++ ++int clk_set_rate(struct clk *clk, unsigned long rate) ++{ ++ int ret; ++ ++ if (IS_ERR(clk)) ++ return -EINVAL; ++ ++ /* We do not default just do a clk->rate = rate as ++ * the clock may have been made this way by choice. ++ */ ++ ++ WARN_ON(clk->set_rate == NULL); ++ ++ if (clk->set_rate == NULL) ++ return -EINVAL; ++ spin_lock(&clocks_lock); ++ ret = (clk->set_rate)(clk, rate); ++ spin_unlock(&clocks_lock); ++ ++ return ret; ++} ++ ++struct clk *clk_get_parent(struct clk *clk) ++{ ++ return clk->parent; ++} ++ ++int clk_set_parent(struct clk *clk, struct clk *parent) ++{ ++ int ret = 0; ++ ++ if (IS_ERR(clk)) ++ return -EINVAL; ++ ++ spin_lock(&clocks_lock); ++ ++ if (clk->set_parent) ++ ret = (clk->set_parent)(clk, parent); ++ ++ spin_unlock(&clocks_lock); ++ ++ return ret; ++} ++ ++EXPORT_SYMBOL(clk_get); ++EXPORT_SYMBOL(clk_put); ++EXPORT_SYMBOL(clk_enable); ++EXPORT_SYMBOL(clk_disable); ++EXPORT_SYMBOL(clk_get_rate); ++EXPORT_SYMBOL(clk_round_rate); ++EXPORT_SYMBOL(clk_set_rate); ++EXPORT_SYMBOL(clk_get_parent); ++EXPORT_SYMBOL(clk_set_parent); ++ ++/* base clocks */ ++ ++static int clk_default_setrate(struct clk *clk, unsigned long rate) ++{ ++ clk->rate = rate; ++ return 0; ++} ++ ++struct clk clk_xtal = { ++ .name = "xtal", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++}; ++ ++struct clk clk_ext = { ++ .name = "ext", ++ .id = -1, ++}; ++ ++struct clk clk_epll = { ++ .name = "epll", ++ .id = -1, ++}; ++ ++struct clk clk_mpll = { ++ .name = "mpll", ++ .id = -1, ++ .set_rate = clk_default_setrate, ++}; ++ ++struct clk clk_upll = { ++ .name = "upll", ++ .id = -1, ++ .parent = NULL, ++ .ctrlbit = 0, ++}; ++ ++struct clk clk_f = { ++ .name = "fclk", ++ .id = -1, ++ .rate = 0, ++ .parent = &clk_mpll, ++ .ctrlbit = 0, ++#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_CPU_S3C6410) ++ .set_rate = s3c_fclk_set_rate, ++ .round_rate = s3c_fclk_round_rate, ++#endif ++}; ++ ++struct clk clk_h = { ++ .name = "hclk", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++ ++#ifdef CONFIG_CPU_S3C6410 ++struct clk clk_hx2 = { ++ .name = "hclkx2", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++#endif ++ ++struct clk clk_p = { ++ .name = "pclk", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++ ++struct clk clk_usb_bus = { ++ .name = "usb-bus", ++ .id = -1, ++ .rate = 0, ++ .parent = &clk_upll, ++}; ++ ++struct clk s3c24xx_uclk = { ++ .name = "uclk", ++ .id = -1, ++}; ++ ++#ifdef CONFIG_CPU_S5P6440 ++struct clk clk_h_low = { ++ .name = "hclk_low", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++ ++struct clk clk_p_low = { ++ .name = "pclk_low", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++#endif ++ ++#ifdef CONFIG_CPU_S5PC100 ++struct clk clk_hpll = { ++ .name = "hpll", ++ .id = -1, ++}; ++ ++struct clk clk_hd0 = { ++ .name = "hclkd0", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++ ++struct clk clk_pd0 = { ++ .name = "pclkd0", ++ .id = -1, ++ .rate = 0, ++ .parent = NULL, ++ .ctrlbit = 0, ++ .set_rate = clk_default_setrate, ++}; ++#endif ++ ++ ++/* initialise the clock system */ ++ ++int s3c24xx_register_clock(struct clk *clk) ++{ ++ clk->owner = THIS_MODULE; ++ ++ if (clk->enable == NULL) ++ clk->enable = clk_null_enable; ++ ++ /* add to the list of available clocks */ ++ ++ /* Quick check to see if this clock has already been registered. */ ++ BUG_ON(clk->list.prev != clk->list.next); ++ ++ spin_lock(&clocks_lock); ++ list_add(&clk->list, &clocks); ++ spin_unlock(&clocks_lock); ++ ++ return 0; ++} ++ ++int s3c24xx_register_clocks(struct clk **clks, int nr_clks) ++{ ++ int fails = 0; ++ ++ for (; nr_clks > 0; nr_clks--, clks++) { ++ if (s3c24xx_register_clock(*clks) < 0) ++ fails++; ++ } ++ ++ return fails; ++} ++ ++/* initalise all the clocks */ ++ ++int __init s3c24xx_register_baseclocks(unsigned long xtal) ++{ ++ printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); ++ ++ clk_xtal.rate = xtal; ++ ++ /* register our clocks */ ++ ++ if (s3c24xx_register_clock(&clk_xtal) < 0) ++ printk(KERN_ERR "failed to register master xtal\n"); ++ ++ if (s3c24xx_register_clock(&clk_mpll) < 0) ++ printk(KERN_ERR "failed to register mpll clock\n"); ++ ++ if (s3c24xx_register_clock(&clk_upll) < 0) ++ printk(KERN_ERR "failed to register upll clock\n"); ++ ++ if (s3c24xx_register_clock(&clk_f) < 0) ++ printk(KERN_ERR "failed to register cpu fclk\n"); ++ ++#ifdef CONFIG_CPU_S5P6440 ++ if (s3c24xx_register_clock(&clk_h_low) < 0) ++ printk(KERN_ERR "failed to register cpu hclk_low\n"); ++ ++ if (s3c24xx_register_clock(&clk_p_low) < 0) ++ printk(KERN_ERR "failed to register cpu pclk_low\n"); ++#endif ++ ++#ifdef CONFIG_CPU_S5PC100 ++ if (s3c24xx_register_clock(&clk_hd0) < 0) ++ printk(KERN_ERR "failed to register cpu hclkd0\n"); ++ ++ if (s3c24xx_register_clock(&clk_pd0) < 0) ++ printk(KERN_ERR "failed to register cpu pclkd0\n"); ++#endif ++ ++ if (s3c24xx_register_clock(&clk_h) < 0) ++ printk(KERN_ERR "failed to register cpu hclk\n"); ++ ++#ifdef CONFIG_CPU_S3C6410 ++ if (s3c24xx_register_clock(&clk_hx2) < 0) ++ printk(KERN_ERR "failed to register cpu hclkx2\n"); ++#endif ++ ++ if (s3c24xx_register_clock(&clk_p) < 0) ++ printk(KERN_ERR "failed to register cpu pclk\n"); ++ ++ return 0; ++} ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-hsmmc.c linux-2.6.28.6/arch/arm/plat-s3c/dev-hsmmc.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-hsmmc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-hsmmc.c 2010-04-21 06:36:09.000000000 +0200 +@@ -0,0 +1,105 @@ ++/* linux/arch/arm/plat-s3c/dev-hsmmc.c ++ * ++ * Copyright (c) 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for hsmmc devices ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++static void setup_sdhci0_irq_cd (void) ++{ ++ /* init GPIO as a ext irq */ ++ ++ s3c_gpio_cfgpin(S3C64XX_GPN(13), S3C_GPIO_SFN(2)); ++ s3c_gpio_setpull(S3C64XX_GPN(13), S3C_GPIO_PULL_NONE); ++ ++ set_irq_type(S3C_EINT(13), IRQ_TYPE_EDGE_BOTH); ++ ++} ++ ++static uint detect_sdhci0_irq_cd (void) ++{ ++ uint detect; ++ ++ detect = readl(S3C64XX_GPNDAT); ++ detect &= 0x2000; /* GPN13 */ ++ return (!detect); ++} ++ ++static struct resource s3c_hsmmc_resource[] = { ++ [0] = { ++ .start = S3C_PA_HSMMC0, ++ .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_HSMMC0, ++ .end = IRQ_HSMMC0, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; ++ ++struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { ++ .max_width = 4, ++ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_SD_HIGHSPEED), ++ .cfg_ext_cd = setup_sdhci0_irq_cd, ++ .detect_ext_cd = detect_sdhci0_irq_cd, ++ .ext_cd = S3C_EINT(13), ++}; ++ ++struct platform_device s3c_device_hsmmc0 = { ++ .name = "s3c-sdhci", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), ++ .resource = s3c_hsmmc_resource, ++ .dev = { ++ .dma_mask = &s3c_device_hsmmc_dmamask, ++ .coherent_dma_mask = 0xffffffffUL, ++ .platform_data = &s3c_hsmmc0_def_platdata, ++ }, ++}; ++ ++void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) ++{ ++ struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; ++ ++ set->max_width = pd->max_width; ++ ++ if (pd->host_caps) ++ set->host_caps = pd->host_caps; ++ if (pd->cfg_gpio) ++ set->cfg_gpio = pd->cfg_gpio; ++ if (pd->cfg_card) ++ set->cfg_card = pd->cfg_card; ++ if (pd->cfg_ext_cd) ++ set->cfg_ext_cd = pd->cfg_ext_cd; ++ if (pd->detect_ext_cd) ++ set->detect_ext_cd = pd->detect_ext_cd; ++ if (pd->ext_cd) ++ set->ext_cd = pd->ext_cd; ++} ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-hsmmc1.c linux-2.6.28.6/arch/arm/plat-s3c/dev-hsmmc1.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-hsmmc1.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-hsmmc1.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,75 @@ ++/* linux/arch/arm/plat-s3c/dev-hsmmc1.c ++ * ++ * Copyright (c) 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for hsmmc device 1 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static struct resource s3c_hsmmc1_resource[] = { ++ [0] = { ++ .start = S3C_PA_HSMMC1, ++ .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_HSMMC1, ++ .end = IRQ_HSMMC1, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL; ++ ++struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { ++ .max_width = 4, ++ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_SD_HIGHSPEED), ++}; ++ ++struct platform_device s3c_device_hsmmc1 = { ++ .name = "s3c-sdhci", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), ++ .resource = s3c_hsmmc1_resource, ++ .dev = { ++ .dma_mask = &s3c_device_hsmmc1_dmamask, ++ .coherent_dma_mask = 0xffffffffUL, ++ .platform_data = &s3c_hsmmc1_def_platdata, ++ }, ++}; ++ ++void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) ++{ ++ struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; ++ ++ set->max_width = pd->max_width; ++ ++ if (pd->host_caps) ++ set->host_caps = pd->host_caps; ++ if (pd->cfg_gpio) ++ set->cfg_gpio = pd->cfg_gpio; ++ if (pd->cfg_card) ++ set->cfg_card = pd->cfg_card; ++ if (pd->cfg_ext_cd) ++ set->cfg_ext_cd = pd->cfg_ext_cd; ++ if (pd->detect_ext_cd) ++ set->detect_ext_cd = pd->detect_ext_cd; ++ if (pd->ext_cd) ++ set->ext_cd = pd->ext_cd; ++} ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-hsmmc2.c linux-2.6.28.6/arch/arm/plat-s3c/dev-hsmmc2.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-hsmmc2.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-hsmmc2.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,75 @@ ++/* linux/arch/arm/plat-s3c/dev-hsmmc1.c ++ * ++ * Copyright (c) 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for hsmmc device 1 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static struct resource s3c_hsmmc2_resource[] = { ++ [0] = { ++ .start = S3C_PA_HSMMC2, ++ .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_HSMMC2, ++ .end = IRQ_HSMMC2, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL; ++ ++struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { ++ .max_width = 4, ++ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_SD_HIGHSPEED | MMC_CAP_ON_BOARD), ++}; ++ ++struct platform_device s3c_device_hsmmc2 = { ++ .name = "s3c-sdhci", ++ .id = 2, ++ .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), ++ .resource = s3c_hsmmc2_resource, ++ .dev = { ++ .dma_mask = &s3c_device_hsmmc2_dmamask, ++ .coherent_dma_mask = 0xffffffffUL, ++ .platform_data = &s3c_hsmmc2_def_platdata, ++ }, ++}; ++ ++void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) ++{ ++ struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; ++ ++ set->max_width = pd->max_width; ++ ++ if (pd->host_caps) ++ set->host_caps = pd->host_caps; ++ if (pd->cfg_gpio) ++ set->cfg_gpio = pd->cfg_gpio; ++ if (pd->cfg_card) ++ set->cfg_card = pd->cfg_card; ++ if (pd->cfg_ext_cd) ++ set->cfg_ext_cd = pd->cfg_ext_cd; ++ if (pd->detect_ext_cd) ++ set->detect_ext_cd = pd->detect_ext_cd; ++ if (pd->ext_cd) ++ set->ext_cd = pd->ext_cd; ++} ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-i2c0.c linux-2.6.28.6/arch/arm/plat-s3c/dev-i2c0.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-i2c0.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-i2c0.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,71 @@ ++/* linux/arch/arm/plat-s3c/dev-i2c0.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for i2c device 0 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++static struct resource s3c_i2c_resource[] = { ++ [0] = { ++ .start = S3C_PA_IIC, ++ .end = S3C_PA_IIC + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_IIC, ++ .end = IRQ_IIC, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device s3c_device_i2c0 = { ++ .name = "s3c2410-i2c", ++#ifdef CONFIG_S3C_DEV_I2C1 ++ .id = 0, ++#else ++ .id = -1, ++#endif ++ .num_resources = ARRAY_SIZE(s3c_i2c_resource), ++ .resource = s3c_i2c_resource, ++}; ++ ++static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { ++ .flags = 0, ++ .slave_addr = 0x10, ++ .bus_freq = 100*1000, ++ .max_freq = 400*1000, ++ .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, ++}; ++ ++void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) ++{ ++ struct s3c2410_platform_i2c *npd; ++ ++ if (!pd) ++ pd = &default_i2c_data0; ++ ++ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); ++ if (!npd) ++ printk(KERN_ERR "%s: no memory for platform data\n", __func__); ++ else if (!npd->cfg_gpio) ++ npd->cfg_gpio = s3c_i2c0_cfg_gpio; ++ ++ s3c_device_i2c0.dev.platform_data = npd; ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-i2c1.c linux-2.6.28.6/arch/arm/plat-s3c/dev-i2c1.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-i2c1.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-i2c1.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,68 @@ ++/* linux/arch/arm/plat-s3c/dev-i2c1.c ++ * ++ * Copyright 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for i2c device 1 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++static struct resource s3c_i2c_resource[] = { ++ [0] = { ++ .start = S3C_PA_IIC1, ++ .end = S3C_PA_IIC1 + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_IIC1, ++ .end = IRQ_IIC1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device s3c_device_i2c1 = { ++ .name = "s3c2410-i2c", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(s3c_i2c_resource), ++ .resource = s3c_i2c_resource, ++}; ++ ++static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { ++ .flags = 0, ++ .bus_num = 1, ++ .slave_addr = 0x10, ++ .bus_freq = 100*1000, ++ .max_freq = 400*1000, ++ .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, ++}; ++ ++void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) ++{ ++ struct s3c2410_platform_i2c *npd; ++ ++ if (!pd) ++ pd = &default_i2c_data1; ++ ++ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); ++ if (!npd) ++ printk(KERN_ERR "%s: no memory for platform data\n", __func__); ++ else if (!npd->cfg_gpio) ++ npd->cfg_gpio = s3c_i2c1_cfg_gpio; ++ ++ s3c_device_i2c1.dev.platform_data = npd; ++} +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-i2s.c linux-2.6.28.6/arch/arm/plat-s3c/dev-i2s.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-i2s.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-i2s.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,49 @@ ++/* linux/arch/arm/plat-s3c/dev-i2s.c ++ * ++ * Copyright (c) 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for hsmmc devices ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++ ++/* IIS */ ++static struct resource s3c_iis_resource[] = { ++ [0] = { ++ .start = S3C_PA_IIS, ++ .end = S3C_PA_IIS + S3C_SZ_IIS -1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_S3C6410_IIS, ++ .end = IRQ_S3C6410_IIS, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static u64 s3c_device_iis_dmamask = 0xffffffffUL; ++ ++struct platform_device s3c_device_iis = { ++ .name = "s3c-iis", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(s3c_iis_resource), ++ .resource = s3c_iis_resource, ++ .dev = { ++ .dma_mask = &s3c_device_iis_dmamask, ++ .coherent_dma_mask = 0xffffffffUL ++ } ++}; ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dev-ts.c linux-2.6.28.6/arch/arm/plat-s3c/dev-ts.c +--- linux-2.6.28/arch/arm/plat-s3c/dev-ts.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dev-ts.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* linux/arch/arm/plat-s3c/dev-ts.c ++ * ++ * Copyright (c) 2008 Simtec Electronics ++ * Ben Dooks ++ * http://armlinux.simtec.co.uk/ ++ * ++ * S3C series device definition for hsmmc devices ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* Touch srcreen */ ++static struct resource s3c_ts_resource[] = { ++ [0] = { ++ .start = S3C_PA_ADC, ++ .end = S3C_PA_ADC + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_PENDN, ++ .end = IRQ_PENDN, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ .start = IRQ_ADC, ++ .end = IRQ_ADC, ++ .flags = IORESOURCE_IRQ, ++ } ++ ++}; ++ ++struct platform_device s3c_device_ts = { ++ .name = "s3c-ts", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(s3c_ts_resource), ++ .resource = s3c_ts_resource, ++}; ++ ++void __init s3c_ts_set_platdata(struct s3c_ts_mach_info *pd) ++{ ++ struct s3c_ts_mach_info *npd; ++ ++ npd = kmalloc(sizeof(*npd), GFP_KERNEL); ++ if (npd) { ++ memcpy(npd, pd, sizeof(*npd)); ++ s3c_device_ts.dev.platform_data = npd; ++ } else { ++ printk(KERN_ERR "no memory for Touchscreen platform data\n"); ++ } ++} ++ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dma-pl080.c linux-2.6.28.6/arch/arm/plat-s3c/dma-pl080.c +--- linux-2.6.28/arch/arm/plat-s3c/dma-pl080.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dma-pl080.c 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1600 @@ ++/* linux/arch/arm/plat-s3c/dma-pl080.c ++ * ++ * Copyright (c) 2003-2005,2006 Samsung Electronics ++ * ++ * S3C6400/S3C6410 DMA core ++ * ++ * http://www.samsung.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#ifdef CONFIG_S3C_DMA_DEBUG ++#define DEBUG ++#endif ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++ ++/* io map for dma */ ++static void __iomem *dma_base; ++static struct kmem_cache *dma_kmem; ++ ++static int dma_channels; ++struct s3c_dma_selection dma_sel; ++static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; ++ ++/* dma channel state information */ ++struct s3c2410_dma_chan s3c_dma_chans[S3C_DMA_CHANNELS]; ++s3c_dma_controller_t s3c_dma_cntlrs[S3C_DMA_CONTROLLERS]; ++ ++#undef pr_debug ++//#define dma_dbg ++ ++#ifdef dma_dbg ++#define sh_printk(fmt...) printk( fmt) ++#define pr_debug(fmt...) printk( fmt) ++#else ++#define sh_printk(fmt...) ++#define pr_debug(fmt...) ++#endif ++ ++/* debugging functions */ ++ ++#define BUF_MAGIC (0xcafebabe) ++ ++#define dmawarn(fmt...) printk(KERN_DEBUG fmt) ++ ++#define dma_regaddr(chan, reg) ((chan)->regs + (reg)) ++#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) ++#define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) ++ ++#define dbg_showregs(chan) do { } while(0) ++#define dbg_showchan(chan) do { } while(0) ++ ++void s3c_dma_dump(int dcon_num, int channel) ++{ ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_STATUS); ++ printk("%d dcon_num %d subchnnel INT_STATUS %lx\n", dcon_num, channel, tmp); ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_TCSTATUS); ++ printk("%d dcon_num %d subchnnel INT_TCSTATUS %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_ENBLD_CHANNELS); ++ printk("%d dcon_num %d subchnnel ENBLD_CHANNELS %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CONFIGURATION); ++ printk("%d dcon_num %d subchnnel DMAC_CONFIGUARATION %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CSRCADDR(channel)); ++ printk("%d dcon_num %d subchnnel SRCADDRESS %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CDESTADDR(channel)); ++ printk("%d dcon_num %d subchnnel DESTADDRESS %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CLLI(channel)); ++ printk("%d dcon_num %d subchnnel LLI %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONTROL0(channel)); ++ printk("%d dcon_num %d subchnnel CCONTROL0 %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONTROL1(channel)); ++ printk("%d dcon_num %d subchnnel CCONTROL1 %lx\n", dcon_num, channel, tmp); ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONFIGURATION(channel)); ++ ++ printk("%d dcon_num %d subchnnel CH CONFIGUARATION %lx\n", dcon_num, channel, tmp); ++} ++ ++ ++/* lookup_dma_channel ++ * ++ * change the dma channel number given into a real dma channel id ++*/ ++ ++static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) ++{ ++ if (channel & DMACH_LOW_LEVEL) ++ return &s3c_dma_chans[channel & ~DMACH_LOW_LEVEL]; ++ else ++ return dma_chan_map[channel]; ++} ++ ++/* s3c_dma_stats_timeout ++ * ++ * Update DMA stats from timeout info ++ */ ++static void s3c_dma_stats_timeout(struct s3c_dma_stats * stats, int val) ++{ ++ if (stats == NULL) ++ return; ++ ++ if (val > stats->timeout_longest) ++ stats->timeout_longest = val; ++ if (val < stats->timeout_shortest) ++ stats->timeout_shortest = val; ++ ++ stats->timeout_avg += val; ++} ++ ++void s3c_enable_dmac(unsigned int dcon_num) ++{ ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ dma_wrreg(dma_controller, S3C_DMAC_CONFIGURATION, S3C_DMA_CONTROLLER_ENABLE); ++} ++ ++void s3c_disable_dmac(unsigned int dcon_num) ++{ ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CONFIGURATION); ++ tmp &= ~S3C_DMA_CONTROLLER_ENABLE; ++ dma_wrreg(dma_controller, S3C_DMAC_CONFIGURATION, tmp); ++} ++ ++void s3c_clear_interrupts (int dcon_num, int channel) ++{ ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_TCCLEAR); ++ tmp |= (1 << channel); ++ dma_wrreg(dma_controller, S3C_DMAC_INT_TCCLEAR, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_ERRORCLEAR); ++ tmp |= (1 << channel); ++ dma_wrreg(dma_controller, S3C_DMAC_INT_ERRORCLEAR, tmp); ++} ++ ++/* s3c_dma_waitforload ++ * ++ * wait for the DMA engine to load a buffer, and update the state accordingly ++ */ ++static int s3c_dma_waitforload(struct s3c2410_dma_chan *chan, int line) ++{ ++ int timeout = chan->load_timeout; ++ int took; ++ ++ pr_debug("%s channel number : %d\n", __FUNCTION__, chan->number); ++ ++ if (chan->load_state != S3C_DMALOAD_1LOADED) { ++ printk(KERN_ERR ++ "dma%d: s3c_dma_waitforload() called in loadstate %d from line %d\n", ++ chan->number, chan->load_state, line); ++ return 0; ++ } ++ ++ if (chan->stats != NULL) ++ chan->stats->loads++; ++ ++ while (--timeout > 0) { ++ if ((dma_rdreg(chan->dma_con, S3C_DMAC_ENBLD_CHANNELS)) & (0x1 << chan->number)) { ++ took = chan->load_timeout - timeout; ++ s3c_dma_stats_timeout(chan->stats, took); ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_1LOADED: ++ chan->load_state = S3C_DMALOAD_1RUNNING; ++ break; ++ ++ default: ++ printk(KERN_ERR ++ "dma%d: unknown load_state in s3c_dma_waitforload() %d\n", ++ chan->number, chan->load_state); ++ } ++ ++ return 1; ++ } ++ } ++ ++ if (chan->stats != NULL) { ++ chan->stats->timeout_failed++; ++ } ++ ++ return 0; ++} ++ ++ ++/* s3c_dma_loadbuffer ++ * ++ * load a buffer, and update the channel state ++ */ ++static inline int s3c_dma_loadbuffer(struct s3c2410_dma_chan *chan, ++ struct s3c_dma_buf *buf) ++{ ++ unsigned long reload; ++ ++ pr_debug("s3c_chan_loadbuffer: loading buffer %p (0x%08lx,0x%06x)\n", ++ buf, (unsigned long) buf->data, buf->size); ++ ++ if (buf == NULL) { ++ dmawarn("buffer is NULL\n"); ++ return -EINVAL; ++ } ++ ++ /* check the state of the channel before we do anything */ ++ ++ if (chan->load_state == S3C_DMALOAD_1LOADED) { ++ dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); ++ reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; ++ } ++ ++ if (chan->load_state == S3C_DMALOAD_1LOADED_1RUNNING) { ++ dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); ++ reload = S3C2410_DCON_AUTORELOAD; ++ } ++ ++ writel(buf->data, chan->addr_reg); ++ ++ pr_debug("%s: DMA control0 - %08x\n", __FUNCTION__, chan->dcon); ++ pr_debug("%s: DMA control1 - %08x\n", __FUNCTION__, (buf->size / chan->xfer_unit)); ++ ++ dma_wrreg(chan, S3C_DMAC_CxCONTROL0, chan->dcon); ++ dma_wrreg(chan, S3C_DMAC_CxCONTROL1, (buf->size / chan->xfer_unit)); ++ ++ chan->next = buf->next; ++ ++ /* update the state of the channel */ ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_NONE: ++ chan->load_state = S3C_DMALOAD_1LOADED; ++ break; ++ ++ case S3C_DMALOAD_1RUNNING: ++ chan->load_state = S3C_DMALOAD_1LOADED_1RUNNING; ++ break; ++ ++ default: ++ dmawarn("dmaload: unknown state %d in loadbuffer\n", chan->load_state); ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/* s3c_dma_call_op ++ * ++ * small routine to call the o routine with the given op if it has been ++ * registered ++ */ ++static void s3c_dma_call_op(struct s3c2410_dma_chan * chan, enum s3c_chan_op op) ++{ ++ if (chan->op_fn != NULL) { ++ (chan->op_fn) (chan, op); ++ } ++} ++ ++/* s3c_dma_buffdone ++ * ++ * small wrapper to check if callback routine needs to be called, and ++ * if so, call it ++ */ ++static inline void s3c_dma_buffdone(struct s3c2410_dma_chan * chan, ++ struct s3c_dma_buf * buf, ++ enum s3c2410_dma_buffresult result) ++{ ++ pr_debug("callback_fn will be called=%p, buf=%p, id=%p, size=%d, result=%d\n", ++ chan->callback_fn, buf, buf->id, buf->size, result); ++ ++ if (chan->callback_fn != NULL) { ++ (chan->callback_fn) (chan, buf->id, buf->size, result); ++ } ++} ++ ++/* s3c_dma_start ++ * ++ * start a dma channel going ++ */ ++static int s3c_dma_start(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long flags; ++ ++ pr_debug("s3c_start_dma: channel number=%d, index=%d\n", chan->number, chan->index); ++ ++ local_irq_save(flags); ++ ++ if (chan->state == S3C_DMA_RUNNING) { ++ pr_debug("s3c_start_dma: already running (%d)\n", chan->state); ++ local_irq_restore(flags); ++ return 0; ++ } ++ ++ chan->state = S3C_DMA_RUNNING; ++ ++ /* check wether there is anything to load, and if not, see ++ * if we can find anything to load ++ */ ++ ++ if (chan->load_state == S3C_DMALOAD_NONE) { ++ if (chan->next == NULL) { ++ printk(KERN_ERR "dma%d: dcon_num has nothing loaded\n", chan->number); ++ chan->state = S3C_DMA_IDLE; ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ ++ s3c_dma_loadbuffer(chan, chan->next); ++ } ++ ++ dbg_showchan(chan); ++ ++ /* enable the channel */ ++ ++ if (!chan->irq_enabled) { ++ enable_irq(chan->irq); ++ chan->irq_enabled = 1; ++ } ++ ++ /* Get the DMA channel started ...*/ ++ dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, chan->config_flags); ++ ++ pr_debug("%s:wrote %08lx to S3C_DMAC_CxCONFIGURATION.\n",__FUNCTION__, chan->config_flags); ++ ++ /* Start the DMA operation on Peripheral */ ++ s3c_dma_call_op(chan, S3C2410_DMAOP_START); ++ ++ dbg_showchan(chan); ++ ++ local_irq_restore(flags); ++ return 0; ++} ++ ++ ++/* s3c2410_dma_enqueue ++ * ++ * queue an given buffer for dma transfer. ++ * ++ * id the device driver's id information for this buffer ++ * data the physical address of the buffer data ++ * size the size of the buffer in bytes ++ * ++ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART ++ * is checked, and if set, the channel is started. If this flag isn't set, ++ * then an error will be returned. ++ * ++ * It is possible to queue more than one DMA buffer onto a channel at ++ * once, and the code will deal with the re-loading of the next buffer ++ * when necessary. ++ */ ++int s3c2410_dma_enqueue(unsigned int channel, void *id, ++ dma_addr_t data, int size) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ struct s3c_dma_buf *buf; ++ unsigned long flags; ++ ++ pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int) data, size); ++ ++ buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); ++ if (buf == NULL) { ++ printk(KERN_ERR "dma<%d> no memory for buffer\n", channel); ++ return -ENOMEM; ++ } ++ ++ pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); ++ ++ //dbg_showchan(chan); ++ ++ buf->next = NULL; ++ buf->data = buf->ptr = data; ++ buf->size = size; ++ buf->id = id; ++ buf->magic = BUF_MAGIC; ++ ++ local_irq_save(flags); ++ ++ if (chan->curr == NULL) { ++ /* we've got nothing loaded... */ ++ pr_debug("%s: buffer %p queued onto empty channel\n", __FUNCTION__, buf); ++ ++ chan->curr = buf; ++ chan->end = buf; ++ chan->next = NULL; ++ } else { ++ pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", ++ chan->number, __FUNCTION__, buf); ++ ++ if (chan->end == NULL) /* In case of flushing */ ++ pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", ++ chan->number, __FUNCTION__, chan); ++ else { ++ chan->end->next = buf; ++ chan->end = buf; ++ } ++ } ++ ++ /* if necessary, update the next buffer field */ ++ if (chan->next == NULL) ++ chan->next = buf; ++ ++ /* check to see if we can load a buffer */ ++ if (chan->state == S3C_DMA_RUNNING) { ++ if (chan->load_state == S3C_DMALOAD_1LOADED && 1) { ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ printk(KERN_ERR "dma%d: loadbuffer:" ++ "timeout loading buffer\n", chan->number); ++ dbg_showchan(chan); ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ } ++ } else if (chan->state == S3C_DMA_IDLE) { ++ if (chan->flags & S3C2410_DMAF_AUTOSTART) { ++ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_START); ++ } else { ++ pr_debug("loading onto stopped channel\n"); ++ } ++ } ++ ++ local_irq_restore(flags); ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_enqueue); ++ ++/* s3c2410_dma_enqueue_sg ++ * ++ * queue an given buffer for dma transfer. ++ * ++ * id the device driver's id information for this buffer ++ * data the physical address of the buffer data ++ * size the size of the buffer in bytes ++ * sg_reg the scatter&gather list ++ * ++ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART ++ * is checked, and if set, the channel is started. If this flag isn't set, ++ * then an error will be returned. ++ * ++ * It is possible to queue more than one DMA buffer onto a channel at ++ * once, and the code will deal with the re-loading of the next buffer ++ * when necessary. ++ */ ++int s3c2410_dma_enqueue_sg(unsigned int channel, void *id, ++ dma_addr_t data, int size, struct s3c_sg_list *sg_list) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ struct s3c_dma_buf *buf; ++ unsigned long flags; ++ ++ pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int) data, size); ++ ++ buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); ++ if (buf == NULL) { ++ printk(KERN_ERR "dma<%d> no memory for buffer\n", channel); ++ return -ENOMEM; ++ } ++ ++ pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); ++ ++ //dbg_showchan(chan); ++ ++ buf->next = NULL; ++ buf->data = buf->ptr = data; ++ buf->size = size; ++ buf->id = id; ++ buf->magic = BUF_MAGIC; ++ ++ local_irq_save(flags); ++ ++ if (chan->curr == NULL) { ++ /* we've got nothing loaded... */ ++ pr_debug("%s: buffer %p queued onto empty channel\n", __FUNCTION__, buf); ++ ++ chan->curr = buf; ++ chan->end = buf; ++ chan->next = NULL; ++ } else { ++ pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", ++ chan->number, __FUNCTION__, buf); ++ ++ if (chan->end == NULL) /* In case of flushing */ ++ pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", ++ chan->number, __FUNCTION__, chan); ++ else { ++ chan->end->next = buf; ++ chan->end = buf; ++ } ++ } ++ ++ /* if necessary, update the next buffer field */ ++ if (chan->next == NULL) ++ chan->next = buf; ++ ++ /* check to see if we can load a buffer */ ++ if (chan->state == S3C_DMA_RUNNING) { ++ if (chan->load_state == S3C_DMALOAD_1LOADED && 1) { ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ printk(KERN_ERR "dma%d: loadbuffer:" ++ "timeout loading buffer\n", chan->number); ++ dbg_showchan(chan); ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ } ++ } else if (chan->state == S3C_DMA_IDLE) { ++ dma_wrreg(chan, S3C_DMAC_CxLLI, virt_to_phys(&sg_list)); ++ ++ if (chan->flags & S3C2410_DMAF_AUTOSTART) { ++ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_START); ++ } else { ++ pr_debug("loading onto stopped channel\n"); ++ } ++ } ++ ++ local_irq_restore(flags); ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_enqueue_sg); ++ ++ ++static inline void s3c_dma_freebuf(struct s3c_dma_buf * buf) ++{ ++ int magicok = (buf->magic == BUF_MAGIC); ++ ++ buf->magic = -1; ++ ++ if (magicok) { ++ kmem_cache_free(dma_kmem, buf); ++ } else { ++ printk("s3c_dma_freebuf: buff %p with bad magic\n", buf); ++ } ++} ++ ++/* s3c_dma_lastxfer ++ * ++ * called when the system is out of buffers, to ensure that the channel ++ * is prepared for shutdown. ++ */ ++static inline void s3c_dma_lastxfer(struct s3c2410_dma_chan *chan) ++{ ++ pr_debug("DMA CH %d: s3c_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_NONE: ++ pr_debug("DMA CH %d: s3c_dma_lastxfer: load_state : S3C2_DMALOAD_NONE%d\n", chan->number); ++ break; ++ ++ case S3C_DMALOAD_1LOADED: ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ /* flag error? */ ++ printk(KERN_ERR "dma%d: timeout waiting for load\n", chan->number); ++ return; ++ } ++ break; ++ ++ default: ++ pr_debug("dma%d: lastxfer: unhandled load_state %d with no next", ++ chan->number, chan->load_state); ++ return; ++ ++ } ++ ++} ++ ++ ++#define dmadbg2(x...) ++ ++static irqreturn_t s3c_dma_irq(int irq, void *devpw) ++{ ++ unsigned int channel = 0, dcon_num, i; ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = (s3c_dma_controller_t *) devpw; ++ ++ struct s3c2410_dma_chan *chan=NULL; ++ struct s3c_dma_buf *buf; ++ ++ dcon_num = dma_controller->number; ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INT_TCSTATUS); ++ pr_debug("# s3c_dma_irq: TC status : 0x%x\n", tmp); ++ ++ if(tmp==0) { ++ return IRQ_HANDLED; ++ } ++ ++ for (i = 0; i < S3C_CHANNELS_PER_DMA; i++) { ++ if (tmp & 0x01) { ++ ++ pr_debug("# DMA Controller %d: requestor %d\n", dcon_num, i); ++ ++ channel = i; ++ chan = &s3c_dma_chans[channel + dcon_num * S3C_CHANNELS_PER_DMA]; ++ pr_debug("# DMA channel number : %d, index : %d\n", chan->number, chan->index); ++ ++ buf = chan->curr; ++ ++ dbg_showchan(chan); ++ ++ /* modify the channel state */ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_1RUNNING: ++ /* TODO - if we are running only one buffer, we probably ++ * want to reload here, and then worry about the buffer ++ * callback */ ++ ++ chan->load_state = S3C_DMALOAD_NONE; ++ break; ++ ++ case S3C_DMALOAD_1LOADED: ++ /* iirc, we should go back to NONE loaded here, we ++ * had a buffer, and it was never verified as being ++ * loaded. ++ */ ++ ++ chan->load_state = S3C_DMALOAD_NONE; ++ break; ++ ++ case S3C_DMALOAD_1LOADED_1RUNNING: ++ /* we'll worry about checking to see if another buffer is ++ * ready after we've called back the owner. This should ++ * ensure we do not wait around too long for the DMA ++ * engine to start the next transfer ++ */ ++ ++ chan->load_state = S3C_DMALOAD_1LOADED; ++ break; ++ ++ case S3C_DMALOAD_NONE: ++ printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", ++ chan->number); ++ break; ++ ++ default: ++ printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", ++ chan->number, chan->load_state); ++ break; ++ } ++ ++ if (buf != NULL) { ++ /* update the chain to make sure that if we load any more ++ * buffers when we call the callback function, things should ++ * work properly */ ++ ++ chan->curr = buf->next; ++ buf->next = NULL; ++ ++ if (buf->magic != BUF_MAGIC) { ++ printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", ++ chan->number, __FUNCTION__, buf); ++ goto next_channel; ++ } ++ ++ s3c_dma_buffdone(chan, buf, S3C2410_RES_OK); ++ ++ /* free resouces */ ++ s3c_dma_freebuf(buf); ++ } else { ++ ++ } ++ ++ if (chan->next != NULL) { ++ unsigned long flags; ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_1RUNNING: ++ /* don't need to do anything for this state */ ++ break; ++ ++ case S3C_DMALOAD_NONE: ++ /* can load buffer immediately */ ++ break; ++ ++ case S3C_DMALOAD_1LOADED: ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ /* flag error? */ ++ printk(KERN_ERR "dma%d: timeout waiting for load\n", ++ chan->number); ++ goto next_channel; ++ } ++ ++ break; ++ ++ case S3C_DMALOAD_1LOADED_1RUNNING: ++ goto next_channel; ++ ++ default: ++ printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", ++ chan->number, chan->load_state); ++ goto next_channel; ++ } ++ ++ local_irq_save(flags); ++ s3c_dma_loadbuffer(chan, chan->next); ++ ++ //shaju added for dbg ++ dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, chan->config_flags); ++ ++ local_irq_restore(flags); ++ ++ } else { ++ s3c_dma_lastxfer(chan); ++ ++ /* see if we can stop this channel.. */ ++ if (chan->load_state == S3C_DMALOAD_NONE) { ++ pr_debug("# DMA CH %d(index:%d): end of transfer, stopping channel (%ld)\n", ++ chan->number, chan->index, jiffies); ++ s3c2410_dma_ctrl(chan->index | DMACH_LOW_LEVEL, S3C2410_DMAOP_STOP); ++ } ++ } ++ } ++ ++next_channel: ++ tmp >>= 1; ++ ++ } ++ ++ s3c_clear_interrupts(chan->dma_con->number, chan->number); ++ ++ return IRQ_HANDLED; ++} ++ ++static struct s3c2410_dma_chan *s3c_dma_map_channel(int channel); ++ ++/* s3c_request_dma ++ * ++ * get control of an dma channel ++*/ ++ ++int s3c2410_dma_request(unsigned int channel, ++ struct s3c2410_dma_client *client, ++ void *dev) ++{ ++ struct s3c2410_dma_chan *chan; ++ unsigned long flags; ++ int err; ++ ++ pr_debug("DMA CH %d: s3c2410_request_dma: client=%s, dev=%p\n", ++ channel, client->name, dev); ++ ++ local_irq_save(flags); ++ ++ chan = s3c_dma_map_channel(channel); ++ if (chan == NULL) { ++ local_irq_restore(flags); ++ return -EBUSY; ++ } ++ ++ dbg_showchan(chan); ++ ++ chan->client = client; ++ chan->in_use = 1; ++ ++ chan->dma_con->in_use++; ++ ++ if (!chan->irq_claimed) { ++ pr_debug("DMA CH %d: %s : requesting irq %d\n", ++ channel, __FUNCTION__, chan->irq); ++ ++ chan->irq_claimed = 1; ++ local_irq_restore(flags); ++ ++ err = request_irq(chan->irq, s3c_dma_irq, IRQF_DISABLED|IRQF_SHARED, ++ client->name, (void *) chan->dma_con); ++ ++ local_irq_save(flags); ++ ++ if (err) { ++ chan->in_use = 0; ++ chan->irq_claimed = 0; ++ chan->dma_con->in_use--; ++ local_irq_restore(flags); ++ ++ printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", ++ client->name, chan->irq, chan->number); ++ return err; ++ } ++ ++ chan->irq_enabled = 1; ++ ++ /* enable the main dma.. this can be disabled ++ * when main channel use count is 0 */ ++ s3c_enable_dmac(chan->dma_con->number); ++ } ++ ++ s3c_clear_interrupts(chan->dma_con->number, chan->number); ++ local_irq_restore(flags); ++ ++ /* need to setup */ ++ ++ pr_debug("%s: channel initialised, %p, number:%d, index:%d\n", __FUNCTION__, chan, chan->number, chan->index); ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_request); ++ ++/* s3c_dma_free ++ * ++ * release the given channel back to the system, will stop and flush ++ * any outstanding transfers, and ensure the channel is ready for the ++ * next claimant. ++ * ++ * Note, although a warning is currently printed if the freeing client ++ * info is not the same as the registrant's client info, the free is still ++ * allowed to go through. ++ */ ++int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) ++{ ++ unsigned long flags; ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ pr_debug("%s: DMA channel %d will be stopped\n", __FUNCTION__, chan->number); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ local_irq_save(flags); ++ ++ if (chan->client != client) { ++ printk(KERN_WARNING ++ "DMA CH %d: possible free from different client (channel %p, passed %p)\n", ++ channel, chan->client, client); ++ } ++ ++ /* sort out stopping and freeing the channel */ ++ ++ if (chan->state != S3C_DMA_IDLE) { ++ pr_debug("%s: need to stop dma channel %p\n", __FUNCTION__, chan); ++ ++ /* possibly flush the channel */ ++ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); ++ } ++ ++ chan->client = NULL; ++ chan->in_use = 0; ++ ++ chan->dma_con->in_use--; ++ ++ if (chan->irq_claimed) ++ free_irq(chan->irq, (void *)chan->dma_con); ++ ++ chan->irq_claimed = 0; ++ ++ if (!(channel & DMACH_LOW_LEVEL)) ++ dma_chan_map[channel] = NULL; ++ ++ local_irq_restore(flags); ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_free); ++ ++/*actively polling for the A bit can block the cpu*/ ++void s3c_dma_flush_fifo(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long tmp; ++ ++ tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION); ++ tmp |= S3C_DMACONFIG_HALT; ++ dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, tmp); ++ ++ tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION); ++ ++ /*this while loop can be very dangerous..may be put the process to sleep rather than waiting till fifo is drained */ ++ while (tmp & S3C_DMACONFIG_ACTIVE) { ++ tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION); ++ } ++} ++ ++static int s3c_dma_dostop(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long tmp; ++ unsigned long flags; ++ ++ pr_debug("%s: DMA Channel No : %d\n", __FUNCTION__, chan->number); ++ ++ dbg_showchan(chan); ++ ++ local_irq_save(flags); ++ ++ s3c_dma_flush_fifo(chan); ++ ++ s3c_dma_call_op(chan, S3C2410_DMAOP_STOP); ++ ++ tmp = dma_rdreg(chan, S3C_DMAC_CxCONFIGURATION); ++ ++ tmp &= ~S3C_DMACONFIG_CHANNEL_ENABLE; ++ dma_wrreg(chan, S3C_DMAC_CxCONFIGURATION, tmp); ++ ++ pr_debug("%s: S3C_DMAC_CxCONFIGURATION : %08x\n", __FUNCTION__, tmp); ++ ++ chan->state = S3C_DMA_IDLE; ++ chan->load_state = S3C_DMALOAD_NONE; ++ ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++static void s3c_dma_showchan(struct s3c2410_dma_chan * chan) ++{ ++ ++} ++ ++/* s3c_dma_flush ++ * ++ * stop the channel, and remove all current and pending transfers ++ */ ++ ++void s3c_waitforstop(struct s3c2410_dma_chan *chan) ++{ ++ ++} ++ ++static int s3c_dma_flush(struct s3c2410_dma_chan *chan) ++{ ++ struct s3c_dma_buf *buf, *next; ++ unsigned long flags; ++ ++ pr_debug("%s:\n", __FUNCTION__); ++ ++ local_irq_save(flags); ++ ++ s3c_dma_showchan(chan); ++ ++ if (chan->state != S3C_DMA_IDLE) { ++ pr_debug("%s: stopping channel...\n", __FUNCTION__); ++ s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); ++ } ++ ++ buf = chan->curr; ++ if (buf == NULL) ++ buf = chan->next; ++ ++ chan->curr = chan->next = chan->end = NULL; ++ chan->load_state = S3C_DMALOAD_NONE; ++ ++ if (buf != NULL) { ++ for (; buf != NULL; buf = next) { ++ next = buf->next; ++ ++ pr_debug("%s: free buffer %p, next %p\n", __FUNCTION__, buf, buf->next); ++ ++ s3c_dma_buffdone(chan, buf, S3C2410_RES_ABORT); ++ s3c_dma_freebuf(buf); ++ } ++ } ++ //s3c_dma_waitforstop(chan); ++ ++ s3c_dma_showchan(chan); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++int s3c_dma_started(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ dbg_showchan(chan); ++ ++ /* if we've only loaded one buffer onto the channel, then chec ++ * to see if we have another, and if so, try and load it so when ++ * the first buffer is finished, the new one will be loaded onto ++ * the channel */ ++ ++ if (chan->next != NULL) { ++ if (chan->load_state == S3C_DMALOAD_1LOADED) { ++ ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ pr_debug("%s: buff not yet loaded, no more todo\n", ++ __FUNCTION__); ++ } else { ++ chan->load_state = S3C_DMALOAD_1RUNNING; ++ s3c_dma_loadbuffer(chan, chan->next); ++ } ++ ++ } else if (chan->load_state == S3C_DMALOAD_1RUNNING) { ++ s3c_dma_loadbuffer(chan, chan->next); ++ } ++ } ++ ++ local_irq_restore(flags); ++ ++ return 0; ++ ++} ++ ++int s3c2410_dma_ctrl(dmach_t channel, enum s3c_chan_op op) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ switch (op) { ++ case S3C2410_DMAOP_START: ++ return s3c_dma_start(chan); ++ ++ case S3C2410_DMAOP_STOP: ++ return s3c_dma_dostop(chan); ++ ++ case S3C2410_DMAOP_PAUSE: ++ case S3C2410_DMAOP_RESUME: ++ return -ENOENT; ++ ++ case S3C2410_DMAOP_FLUSH: ++ return s3c_dma_flush(chan); ++ ++ case S3C2410_DMAOP_STARTED: ++ return s3c_dma_started(chan); ++ ++ case S3C2410_DMAOP_TIMEOUT: ++ return 0; ++ ++ } ++ ++ return -ENOENT; /* unknown, don't bother */ ++} ++EXPORT_SYMBOL(s3c2410_dma_ctrl); ++ ++ ++/* s3c_dma_config ++ * ++ * xfersize: size of unit in bytes (1,2,4) ++ * dcon: base value of the DCONx register ++ */ ++int s3c2410_dma_config(dmach_t channel, ++ int xferunit, ++ int dcon) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", ++ __FUNCTION__, channel, xferunit, dcon); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); ++ ++ dcon |= chan->dcon & dma_sel.dcon_mask; ++ ++ pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); ++ ++ switch (xferunit) { ++ case 1: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_BYTE; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_BYTE; ++ break; ++ ++ case 2: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_HWORD; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_HWORD; ++ break; ++ ++ case 4: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_WORD; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_WORD; ++ break; ++ ++ default: ++ pr_debug("%s: Bad transfer size %d\n", __FUNCTION__, xferunit); ++ return -EINVAL; ++ } ++ ++ pr_debug("%s: DMA Channel control : %08x\n", __FUNCTION__, dcon); ++ ++ dcon |= S3C_DMACONTROL_TC_INT_ENABLE; ++ dcon |= chan->control_flags; ++ pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); ++ ++ /* For DMCCxControl 0 */ ++ chan->dcon = dcon; ++ ++ /* For DMACCxControl 1 : xferunit means transfer width.*/ ++ chan->xfer_unit = xferunit; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_config); ++ ++ ++int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); ++ ++ chan->flags = flags; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_setflags); ++ ++ ++/* do we need to protect the settings of the fields from ++ * irq? ++ */ ++ ++int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); ++ ++ chan->op_fn = rtn; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_set_opfn); ++ ++ ++int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); ++ ++ chan->callback_fn = rtn; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); ++ ++ ++/* s3c2410_dma_devconfig ++ * ++ * configure the dma source/destination hardware type and address ++ * ++ * flowctrl: direction of dma flow ++ * ++ * src_per dst_per: dma channel number of src and dst periphreal, ++ * ++ * devaddr: physical address of the source ++ */ ++ ++int s3c2410_dma_devconfig(int channel, ++ enum s3c2410_dmasrc source, ++ int hwcfg, ++ unsigned long devaddr) ++{ ++ unsigned long tmp; ++ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", ++ __FUNCTION__, (int)source, hwcfg, devaddr); ++ ++ chan->source = source; ++ chan->dev_addr = devaddr; ++ ++ switch (source) { ++ case S3C2410_DMASRC_MEM: ++ /* source is Memory : Mem-to-Peri ( Write into FIFO) */ ++ tmp = S3C_DMACONFIG_TCMASK | S3C_DMACONFIG_FLOWCTRL_MEM2PER | (chan->map->hw_addr.to) << ++ S3C_DEST_SHIFT | S3C_DMACONFIG_CHANNEL_ENABLE; ++ ++ chan->config_flags = tmp; ++ ++ /* TODO : Now, Scatter&Gather DMA NOT supported */ ++ dma_wrreg(chan, S3C_DMAC_CxLLI, 0); ++ ++ /* devaddr : Periperal address (destination) */ ++ dma_wrreg(chan, S3C_DMAC_CxDESTADDR, devaddr); ++ ++ /* source address : memory(buffer) address */ ++ chan->addr_reg = dma_regaddr(chan, S3C_DMAC_CxSRCADDR); ++ ++ chan->control_flags = S3C_DMACONTROL_SRC_INC | S3C_DMACONTROL_DEST_AXI_PERI ; ++ //chan->control_flags = hwcfg; ++ return 0; ++ ++ case S3C2410_DMASRC_HW: ++ /* source is peripheral : Peri-to-Mem ( Read from FIFO) */ ++ tmp = S3C_DMACONFIG_TCMASK | S3C_DMACONFIG_FLOWCTRL_PER2MEM | (chan->map->hw_addr.from) << ++ S3C_SRC_SHIFT | S3C_DMACONFIG_CHANNEL_ENABLE; ++ ++ chan->config_flags = tmp; ++ ++ /* TODO : Now, Scatter&Gather DMA NOT supported */ ++ dma_wrreg(chan, S3C_DMAC_CxLLI, 0); ++ ++ /* devaddr : Periperal address (source) */ ++ dma_wrreg(chan, S3C_DMAC_CxSRCADDR, devaddr); ++ ++ /* destination address : memory(buffer) address */ ++ chan->addr_reg = dma_regaddr(chan, S3C_DMAC_CxDESTADDR); ++ ++ chan->control_flags = S3C_DMACONTROL_DEST_INC | S3C_DMACONTROL_SRC_AXI_PERI; ++ //chan->control_flags = hwcfg; ++ ++ return 0; ++ ++ case S3C_DMA_MEM2MEM: ++ /* this is temporary for G3D */ ++ tmp = S3C_DMACONFIG_TCMASK | S3C_DMACONFIG_FLOWCTRL_MEM2MEM | S3C_DMACONFIG_CHANNEL_ENABLE; ++ ++ chan->config_flags = tmp; ++ ++ /* TODO : Now, Scatter&Gather DMA NOT YET supported */ ++ dma_wrreg(chan, S3C_DMAC_CxLLI, 0); ++ ++ /* devaddr : memory/onenand address (source) */ ++ dma_wrreg(chan, S3C_DMAC_CxSRCADDR, devaddr); ++ ++ /* destination address : memory(buffer) address */ ++ chan->addr_reg = dma_regaddr(chan, S3C_DMAC_CxDESTADDR); ++ ++ chan->control_flags |= (S3C_DMACONTROL_SRC_INC | S3C_DMACONTROL_DEST_AXI_PERI ++ | S3C_DMACONTROL_SBSIZE_4 | S3C_DMACONTROL_DBSIZE_4); ++ //chan->control_flags = hwcfg; ++ ++ return 0; ++ ++ case S3C_DMA_MEM2MEM_P: ++ /* source is memory : Memory-to-Mem ( Read/Write) */ ++ tmp = S3C_DMACONFIG_TCMASK | S3C_DMACONFIG_FLOWCTRL_MEM2MEM | S3C_DMACONFIG_CHANNEL_ENABLE; ++ ++ //if(chan->map->hw_addr.from == S3C_DMA0_ONENAND_RX) { ++ //tmp |= S3C_DMACONFIG_ONENANDMODESRC; ++ //} ++ ++ chan->config_flags = tmp; ++ ++ /* TODO : Now, Scatter&Gather DMA NOT YET supported */ ++ dma_wrreg(chan, S3C_DMAC_CxLLI, 0); ++ ++ /* devaddr : memory/onenand address (source) */ ++ dma_wrreg(chan, S3C_DMAC_CxSRCADDR, devaddr); ++ ++ /* destination address : memory(buffer) address */ ++ chan->addr_reg = dma_regaddr(chan, S3C_DMAC_CxDESTADDR); ++ ++ chan->control_flags |= (S3C_DMACONTROL_SRC_INC | S3C_DMACONTROL_DEST_INC ++ | S3C_DMACONTROL_SBSIZE_4 | S3C_DMACONTROL_DBSIZE_4); ++ //chan->control_flags = hwcfg; ++ ++ return 0; ++ ++ case S3C_DMA_PER2PER: ++ printk("Peripheral-to-Peripheral DMA NOT YET implemented !! \n"); ++ return -EINVAL; ++ ++ default: ++ printk(KERN_ERR "DMA CH :%d - invalid source type ()\n", channel); ++ printk("Unsupported DMA configuration from the device driver using DMA driver \n"); ++ return -EINVAL; ++ } ++ ++} ++ ++EXPORT_SYMBOL(s3c2410_dma_devconfig); ++ ++ ++/* ++ * s3c_dma_getposition ++ * returns the current transfer points for the dma source and destination ++ */ ++int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ if (src != NULL) ++ *src = dma_rdreg(chan, S3C_DMAC_CxSRCADDR); ++ ++ if (dst != NULL) ++ *dst = dma_rdreg(chan, S3C_DMAC_CxDESTADDR); ++ ++ return 0; ++} ++ ++EXPORT_SYMBOL(s3c2410_dma_getposition); ++ ++ ++/* system device class */ ++#ifdef CONFIG_PM ++static int s3c_dma_suspend (struct sys_device *dev, pm_message_t state) ++{ ++ return 0; ++} ++ ++static int s3c_dma_resume (struct sys_device *dev) ++{ ++ return 0; ++} ++#else ++#define s3c_dma_suspend NULL ++#define s3c_dma_resume NULL ++#endif /* CONFIG_PM */ ++ ++struct sysdev_class dma_sysclass = { ++ .name = "s3c64xx-dma", ++ .suspend = s3c_dma_suspend, ++ .resume = s3c_dma_resume, ++}; ++ ++/* kmem cache implementation */ ++ ++static void s3c_dma_cache_ctor(void *p) ++{ ++ memset(p, 0, sizeof(struct s3c_dma_buf)); ++} ++ ++ ++void dma_test (int dcon_num, int channel) ++{ ++ int tmp; ++ ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ dma_wrreg(dma_controller, S3C_DMAC_CONFIGURATION, S3C_DMA_CONTROLLER_ENABLE); ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CONFIGURATION); ++ printk("reg val %d\n", tmp); ++ dma_wrreg(dma_controller, S3C_DMAC_CCONFIGURATION(channel), 0x01); ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONFIGURATION(channel)); ++ ++ printk("reg conf %x\n", tmp); ++ dma_wrreg(dma_controller, S3C_DMAC_CCONTROL0(channel), 0x8ff02064); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CCONTROL0(channel)); ++ printk("reg ctrl %x\n", tmp); ++} ++ ++ ++/* initialisation code */ ++ ++int __init s3c_dma_init(unsigned int channels, unsigned int irq, ++ unsigned int stride) ++{ ++ struct s3c2410_dma_chan *cp; ++ s3c_dma_controller_t *dconp; ++ int channel, controller; ++ int ret; ++ ++ printk("S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics\n"); ++ ++ dma_channels = channels; ++ printk("Total %d DMA channels will be initialized.\n", channels); ++ ++ ret = sysdev_class_register(&dma_sysclass); ++ if (ret != 0) { ++ printk(KERN_ERR "dma sysclass registration failed.\n"); ++ goto err; ++ } ++ ++ dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c_dma_buf), 0, ++ SLAB_HWCACHE_ALIGN, (void *)s3c_dma_cache_ctor); ++ ++ if (dma_kmem == NULL) { ++ printk(KERN_ERR "DMA failed to make kmem cache\n"); ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ for (controller = 0; controller < S3C_DMA_CONTROLLERS; controller++) { ++ dconp = &s3c_dma_cntlrs[controller]; ++ ++ memset(dconp, 0, sizeof(s3c_dma_controller_t)); ++ ++ if(controller < 2) { ++ dma_base = ioremap((S3C_PA_DMA + (controller * 0x100000)), 0x200); ++ if (dma_base == NULL) { ++ printk(KERN_ERR "DMA failed to ioremap register block\n"); ++ return -ENOMEM; ++ } ++ ++ /* dma controller's irqs are in order.. */ ++ dconp->irq = controller + IRQ_DMA0; ++ } ++ else { ++ dma_base = ioremap(((S3C_PA_DMA + 0x8B00000) + ((controller%2) * 0x100000)), 0x200); ++ if (dma_base == NULL) { ++ printk(KERN_ERR "SDMA failed to ioremap register block\n"); ++ return -ENOMEM; ++ } ++ ++ /* dma controller's irqs are in order.. */ ++ dconp->irq = (controller%2) + IRQ_SDMA0; ++ } ++ ++ dconp->number = controller; ++ dconp->regs = dma_base; ++ sh_printk("DMA controller : %d irq %d regs_base %x\n", dconp->number, dconp->irq, ++ dconp->regs); ++ } ++ ++ for (channel = 0; channel < channels; channel++) { ++ controller = channel / S3C_CHANNELS_PER_DMA; ++ cp = &s3c_dma_chans[channel]; ++ ++ memset(cp, 0, sizeof(struct s3c2410_dma_chan)); ++ ++ cp->dma_con = &s3c_dma_cntlrs[controller]; ++ ++ /* dma channel irqs are in order.. */ ++ cp->index = channel; ++ cp->number = channel%S3C_CHANNELS_PER_DMA; ++ ++ cp->irq = s3c_dma_cntlrs[controller].irq; ++ ++ cp->regs = s3c_dma_cntlrs[controller].regs + ((channel%S3C_CHANNELS_PER_DMA)*stride) + 0x100; ++ ++ /* point current stats somewhere */ ++ cp->stats = &cp->stats_store; ++ cp->stats_store.timeout_shortest = LONG_MAX; ++ ++ /* basic channel configuration */ ++ cp->load_timeout = 1 << 18; ++ ++ /* register system device */ ++ cp->dev.cls = &dma_sysclass; ++ cp->dev.id = channel; ++ //ret = sysdev_register(&cp->dev); ++ ++ sh_printk("DMA channel %d at %p, irq %d\n", cp->number, cp->regs, cp->irq); ++ } ++ ++ return 0; ++ ++err: ++ kmem_cache_destroy(dma_kmem); ++ iounmap(dma_base); ++ dma_base = NULL; ++ return ret; ++} ++ ++ ++ ++static inline int is_channel_valid(unsigned int channel) ++{ ++ return (channel & DMA_CH_VALID); ++} ++ ++static struct s3c_dma_order *dma_order; ++ ++ ++/* s3c_dma_map_channel() ++ * ++ * turn the virtual channel number into a real, and un-used hardware ++ * channel. ++ * ++ * first, try the dma ordering given to us by either the relevant ++ * dma code, or the board. Then just find the first usable free ++ * channel ++*/ ++ ++struct s3c2410_dma_chan *s3c_dma_map_channel(int channel) ++{ ++ struct s3c_dma_order_ch *ord = NULL; ++ struct s3c_dma_map *ch_map; ++ struct s3c2410_dma_chan *dmach; ++ int ch; ++ ++ if (dma_sel.map == NULL || channel > dma_sel.map_size) ++ return NULL; ++ ++ ch_map = dma_sel.map + channel; ++ ++ /* first, try the board mapping */ ++ ++ if (dma_order) { ++ ord = &dma_order->channels[channel]; ++ ++ for (ch = 0; ch < dma_channels; ch++) { ++ if (!is_channel_valid(ord->list[ch])) ++ continue; ++ ++ if (s3c_dma_chans[ord->list[ch]].in_use == 0) { ++ ch = ord->list[ch] & ~DMA_CH_VALID; ++ goto found; ++ } ++ } ++ ++ if (ord->flags & DMA_CH_NEVER) ++ return NULL; ++ } ++ ++ /* second, search the channel map for first free */ ++ ++ for (ch = 0; ch < dma_channels; ch++) { ++ if (!is_channel_valid(ch_map->channels[ch])) ++ continue; ++ ++ if (s3c_dma_chans[ch].in_use == 0) { ++ pr_debug("mapped channel %d to %d\n", channel, ch); ++ break; ++ } ++ } ++ ++ if (ch >= dma_channels) ++ return NULL; ++ ++ /* update our channel mapping */ ++ ++ found: ++ dmach = &s3c_dma_chans[ch]; ++ dma_chan_map[channel] = dmach; ++ ++ /* select the channel */ ++ (dma_sel.select)(dmach, ch_map); ++ ++ return dmach; ++} ++ ++static int s3c_dma_check_entry(struct s3c_dma_map *map, int ch) ++{ ++ unsigned long tmp = __raw_readl(S3C_SDMA_SEL); ++ ++ tmp |= map->sdma_sel; ++ __raw_writel(tmp, S3C_SDMA_SEL); ++ ++ return 0; ++} ++ ++int __init s3c_dma_init_map(struct s3c_dma_selection *sel) ++{ ++ struct s3c_dma_map *nmap; ++ size_t map_sz = sizeof(*nmap) * sel->map_size; ++ int ptr; ++ ++ nmap = kmalloc(map_sz, GFP_KERNEL); ++ if (nmap == NULL) ++ return -ENOMEM; ++ ++ memcpy(nmap, sel->map, map_sz); ++ memcpy(&dma_sel, sel, sizeof(*sel)); ++ ++ dma_sel.map = nmap; ++ ++ for (ptr = 0; ptr < sel->map_size; ptr++) ++ s3c_dma_check_entry(nmap+ptr, ptr); ++ ++ return 0; ++} ++ ++int __init s3c_dma_order_set(struct s3c_dma_order *ord) ++{ ++ struct s3c_dma_order *nord = dma_order; ++ ++ if (nord == NULL) ++ nord = kmalloc(sizeof(struct s3c_dma_order), GFP_KERNEL); ++ ++ if (nord == NULL) { ++ printk(KERN_ERR "no memory to store dma channel order\n"); ++ return -ENOMEM; ++ } ++ ++ dma_order = nord; ++ memcpy(nord, ord, sizeof(struct s3c_dma_order)); ++ return 0; ++} ++ ++ +diff -NurbB --exclude linux-2.6.28.6/Documentation/dontdiff linux-2.6.28/arch/arm/plat-s3c/dma-pl330-mcode.h linux-2.6.28.6/arch/arm/plat-s3c/dma-pl330-mcode.h +--- linux-2.6.28/arch/arm/plat-s3c/dma-pl330-mcode.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28.6/arch/arm/plat-s3c/dma-pl330-mcode.h 2009-04-30 09:36:37.000000000 +0200 +@@ -0,0 +1,1145 @@ ++/* linux/arch/arm/plat-s3c/dma-pl330-mcode.h ++ * ++ * DMA PL330 microcode ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/*------------------------------------------------------*/ ++/* Version : v1.1 */ ++/* Date last updated : Dec. 10, 2008 */ ++/*------------------------------------------------------*/ ++ ++ ++#define PL330_DMA_DEBUG ++#undef PL330_DMA_DEBUG ++ ++#ifdef PL330_DMA_DEBUG ++#define dma_debug(fmt...) printk( fmt) ++#else ++#define dma_debug(fmt...) ++#endif ++ ++#define print_warning(fmt...) printk( fmt) ++ ++#define PL330_P2M_DMA 0 ++#define PL330_M2P_DMA 1 ++#define PL330_M2M_DMA 2 ++#define PL330_P2P_DMA 3 ++ ++#define PL330_MAX_ITERATION_NUM 256 ++#define PL330_MAX_JUMPBACK_NUM 256 ++#define PL330_MAX_EVENT_NUM 32 ++#define PL330_MAX_PERIPHERAL_NUM 32 ++#define PL330_MAX_CHANNEL_NUM 8 ++ ++#define DMA_DBGSTATUS 0x0 ++#define DMA_DBGCMD 0x1 ++#define DMA_DBGINST0 0x2 ++#define DMA_DBGINST1 0x3 ++ ++#define memOutp8(addr, data) (*(volatile u8 *)(addr) = (data)) ++#define Outp32(addr, data) (*(volatile u32 *)(addr) = (data)) ++#define Inp32(addr) (*(volatile u32 *)(addr)) ++ ++ ++/* Parameter set for Channel Control Register */ ++typedef struct DMA_control ++{ ++ unsigned uSI :1 ; /* [0] Transfer size not count */ ++ unsigned uSBSize :3 ; /* [3:1] Source 1 transfer size */ ++ unsigned uSBLength :4 ; /* [7:4] Sourse burst len */ ++ unsigned uSProt :3 ; /* [10:8] Source Protection set 101b=5 */ ++ unsigned uSCache :3 ; /* [13:11] Source Cache control */ ++ unsigned uDI :1 ; /* [14] Destination increment */ ++ unsigned uDBSize :3 ; /* [17:15] Destination 1 transfer size */ ++ unsigned uDBLength :4 ; /* [21:18] Destination burst len */ ++ unsigned uDProt :3 ; /* [24:22] Source Protection set 101b=5 */ ++ unsigned uDCache :3 ; /* [27:25] Source Cache control */ ++ unsigned uESSize :4 ; /* [31:28] endian_swap_size */ ++} pl330_DMA_control_t; ++ ++ ++/* Parameter list for a DMA operation */ ++typedef struct DMA_parameters ++{ ++ unsigned long mDirection; /* DMA direction */ ++ unsigned long mPeriNum; /* DMA Peripheral number */ ++ unsigned long mSrcAddr; /* DMA source address */ ++ unsigned long mDstAddr; /* DMA destination address */ ++ unsigned long mTrSize; /* DMA Transfer size */ ++ pl330_DMA_control_t mControl; /* DMA control */ ++ unsigned long mIrqEnable; /* DMA Send IRQ */ ++ unsigned long mLoop; /* DMA Infinite Loop - 0(off) */ ++ unsigned long mBwJump; /* DMA backward relative offset */ ++ unsigned long mLastReq; /* The last DMA Req. */ ++} pl330_DMA_parameters_t; ++ ++ ++static void print_dma_param_info(pl330_DMA_parameters_t dma_param) ++{ ++ /* Parameter list for a DMA operation */ ++ dma_debug(" mDirection = %lu\n", dma_param.mDirection); ++ dma_debug(" mPeriNum = %lu\n", dma_param.mPeriNum); ++ dma_debug(" mSrcAddr = 0x%x\n", dma_param.mSrcAddr); ++ dma_debug(" mDstAddr = 0x%x\n", dma_param.mDstAddr); ++ dma_debug(" mTrSize = %lu\n", dma_param.mTrSize); ++ dma_debug(" mControl = 0x%x\n", dma_param.mControl); ++ dma_debug(" mIrqEnable = %lu\n", dma_param.mIrqEnable); ++ dma_debug(" mLoop = %lu\n", dma_param.mLoop); ++ dma_debug(" mBwJump = %lu\n", dma_param.mBwJump); ++ dma_debug(" mLastReq = %lu\n", dma_param.mLastReq); ++} ++ ++/*---------------------- Primitive functions -------------*/ ++/* When the DMAC is operating in real-time then you can only issue a limited subset of instructions as follows: ++ * DMAGO starts a DMA transaction using a DMA channel that you specify. ++ * DMASEV signals the occurrence of an event, or interrupt, using an event number that you specify. ++ * DMAKILL terminates a thread. ++ ++ * Prior to issuing DMAGO, you must ensure that the system memory contains a suitable ++ * program for the DMAC to execute, starting at the address that the DMAGO specifies. ++ */ ++ ++/* DMAMOV CCR, ... */ ++static int encodeDmaMoveChCtrl(u8 * mcode_ptr, u32 dmacon) ++{ ++ u8 uInsBytes[6]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0xbc); ++ uInsBytes[1] = (u8)(0x1); ++ uInsBytes[2] = (u8)((dmacon>>0)&0xff); ++ uInsBytes[3] = (u8)((dmacon>>8)&0xff); ++ uInsBytes[4] = (u8)((dmacon>>16)&0xff); ++ uInsBytes[5] = (u8)((dmacon>>24)&0xff); ++ ++ for(i=0; i<6; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 6; ++} ++ ++/* DMAMOV SAR, uStAddr ++ * DMAMOV DAR, uStAddr */ ++static int encodeDmaMove(u8 * mcode_ptr, u8 uDir, u32 uStAddr) ++{ ++ u8 uInsBytes[6]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0xbc); ++ uInsBytes[1] = (u8)(0x0|uDir); ++ uInsBytes[2] = (u8)((uStAddr>>0)&0xff); ++ uInsBytes[3] = (u8)((uStAddr>>8)&0xff); ++ uInsBytes[4] = (u8)((uStAddr>>16)&0xff); ++ uInsBytes[5] = (u8)((uStAddr>>24)&0xff); ++ ++ for(i=0; i<6; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 6; ++} ++ ++ ++/* DMALD, DMALDS, DMALDB */ ++static int encodeDmaLoad(u8 * mcode_ptr) ++{ ++ u8 bs=0; ++ u8 x=0; ++ u8 uInsBytes[1]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x04|(bs<<1)|(x<<0)); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++/* DMALDPS, DMALDPB (Load Peripheral) */ ++static int encodeDmaLoadPeri(u8 * mcode_ptr, u8 mPeriNum) ++{ ++ u8 bs; ++ u8 uInsBytes[2]; ++ u32 i; ++ u8 m_uBurstSz=1; ++ ++ if(mPeriNum > PL330_MAX_PERIPHERAL_NUM) { ++ print_warning("[%s] The peripheral number is too big ! : %d\n", __FUNCTION__, mPeriNum); ++ return 0; ++ } ++ ++ bs = (m_uBurstSz == 1) ? 0 : 1; // single -> 0, burst -> 1 ++ ++ uInsBytes[0] = (u8)(0x25|(bs<<1)); ++ uInsBytes[1] = (u8)(0x00|((mPeriNum&0x1f)<<3)); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++/* DMAST, DMASTS, DMASTB */ ++static int encodeDmaStore(u8 * mcode_ptr) ++{ ++ u8 bs=0; ++ u8 x=0; ++ u8 uInsBytes[1]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x08|(bs<<1)|(x<<0)); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++/* DMASTPS, DMASTPB (Store and notify Peripheral) */ ++static int encodeDmaStorePeri(u8 * mcode_ptr, u8 mPeriNum) ++{ ++ u8 bs; ++ u8 uInsBytes[2]; ++ u32 i; ++ u8 m_uBurstSz=1; ++ ++ if(mPeriNum > PL330_MAX_PERIPHERAL_NUM) { ++ print_warning("[%s] The peripheral number is too big ! : %d\n", __FUNCTION__, mPeriNum); ++ return 0; ++ } ++ ++ bs = (m_uBurstSz == 1) ? 0 : 1; /* single:0, burst:1 */ ++ ++ uInsBytes[0] = (u8)(0x29|(bs<<1)); ++ uInsBytes[1] = (u8)(0x00|((mPeriNum&0x1f)<<3)); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++/* DMASTZ */ ++static int encodeDmaStoreZero(u8 * mcode_ptr) ++{ ++ u8 uInsBytes[1]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x0c); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++/* DMALP */ ++static int encodeDmaLoop(u8 * mcode_ptr, u8 uLoopCnt, u8 uIteration) ++{ ++ u8 uInsBytes[2]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x20|(uLoopCnt<<1)); ++ uInsBytes[1] = (u8)(uIteration); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 2; ++ ++} ++ ++/* DMALPFE */ ++static int encodeDmaLoopForever(u8 * mcode_ptr, u8 uBwJump) ++{ ++ u8 bs=0; ++ u8 x=0; ++ u8 uInsBytes[2]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x28|(0<<4)|(0<<2)|(bs<<1)|x); ++ uInsBytes[1] = (u8)(uBwJump); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr + i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++ ++/* DMALPEND, DMALPENDS, DMALPENDB */ ++static int encodeDmaLoopEnd(u8 * mcode_ptr, u8 uLoopCnt, u8 uBwJump) ++{ ++ u8 bs=0; ++ u8 x=0; ++ u8 uInsBytes[2]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x38|(1<<4)|(uLoopCnt<<2)|(bs<<1)|x); ++ uInsBytes[1] = (u8)(uBwJump); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr + i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++/* DMAWFP, DMAWFPS, DMAWFPB (Wait For Peripheral) */ ++static int encodeDmaWaitForPeri(u8 * mcode_ptr, u8 mPeriNum) ++{ ++ u8 bs=0; ++ u8 p=0; ++ u8 uInsBytes[2]; ++ u32 i; ++ ++ if(mPeriNum > PL330_MAX_PERIPHERAL_NUM) { ++ print_warning("[%s] The peripheral number is too big ! : %d\n", __FUNCTION__, mPeriNum); ++ return 0; ++ } ++ ++ uInsBytes[0] = (u8)(0x30|(bs<<1)|p); ++ uInsBytes[1] = (u8)(0x00|((mPeriNum&0x1f)<<3)); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++/* DMAWFE (Wait For Event) : 0 ~ 31 */ ++static int encodeDmaWaitForEvent(u8 * mcode_ptr, u8 uEventNum) ++{ ++ u8 uInsBytes[2]; ++ u32 i; ++ ++ if(uEventNum > PL330_MAX_EVENT_NUM) { ++ print_warning("[%s] The uEventNum number is too big ! : %d\n", __FUNCTION__, uEventNum); ++ return 0; ++ } ++ ++ uInsBytes[0] = (u8)(0x36); ++ uInsBytes[1] = (u8)((uEventNum<<3)|0x2); /* for cache coherency, invalid is issued. */ ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++/* DMAFLUSHP (Flush and notify Peripheral) */ ++static int encodeDmaFlushPeri(u8 * mcode_ptr, u8 mPeriNum) ++{ ++ u8 uInsBytes[2]; ++ u32 i; ++ ++ if(mPeriNum > PL330_MAX_PERIPHERAL_NUM) { ++ print_warning("[%s] The peripheral number is too big ! : %d\n", __FUNCTION__, mPeriNum); ++ return 0; ++ } ++ ++ uInsBytes[0] = (u8)(0x35); ++ uInsBytes[1] = (u8)(0x00|((mPeriNum&0x1f)<<3)); ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++/* DMAEND */ ++static int encodeDmaEnd(u8 * mcode_ptr) ++{ ++ memOutp8(mcode_ptr, 0x00); ++ ++ return 1; ++} ++ ++/* DMAADDH (Add Halfword) */ ++static int encodeDmaAddHalfword(u8 * mcode_ptr, bool bSrcDir, u16 uStAddr) ++{ ++ u8 uDir = (bSrcDir) ? 0 : 1; /* src addr=0, dst addr=1 */ ++ u8 uInsBytes[3]; ++ u32 i; ++ ++ uInsBytes[0] = (u8)(0x54|(uDir<<1)); ++ uInsBytes[1] = (u8)((uStAddr>>0)&0xff); ++ uInsBytes[2] = (u8)((uStAddr>>8)&0xff); ++ ++ for(i=0; i<3; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 3; ++} ++ ++/* DMAKILL (Kill) */ ++static int encodeDmaKill(u8 * mcode_ptr) ++{ ++ u8 uInsBytes[1]; ++ u32 i; ++ uInsBytes[0] = (u8)(0x01); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++/* DMANOP (No operation) */ ++static int encodeDmaNop(u8 * mcode_ptr) ++{ ++ u8 uInsBytes[1]; ++ u32 i; ++ uInsBytes[0] = (u8)(0x18); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++ ++/* DMARMB (Read Memory Barrier) */ ++static int encodeDmaReadMemBarrier(u8 * mcode_ptr) ++{ ++ u8 uInsBytes[1]; ++ u32 i; ++ uInsBytes[0] = (u8)(0x12); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr+i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++/* DMASEV (Send Event) : 0 ~ 31 */ ++static int encodeDmaSendEvent(u8 * mcode_ptr, u8 uEventNum) ++{ ++ u8 uInsBytes[2]; ++ u32 i; ++ uInsBytes[0] = (u8)(0x34); ++ uInsBytes[1] = (u8)((uEventNum<<3)|0x0); ++ ++ if(uEventNum > PL330_MAX_EVENT_NUM) { ++ print_warning("[%s] Event number is too big ! : %d\n", __FUNCTION__, uEventNum); ++ return 0; ++ } ++ ++ for(i=0; i<2; i++) ++ { ++ memOutp8(mcode_ptr + i, uInsBytes[i]); ++ } ++ ++ return 2; ++} ++ ++ ++/* DMAWMB (Write Memory Barrier) */ ++static int encodeDmaWriteMemBarrier(u8 * mcode_ptr) ++{ ++ u8 uInsBytes[1]; ++ u32 i; ++ uInsBytes[0] = (u8)(0x13); ++ ++ for(i=0; i<1; i++) ++ { ++ memOutp8(mcode_ptr + i, uInsBytes[i]); ++ } ++ ++ return 1; ++} ++ ++/* DMAGO over DBGINST[0:1] registers */ ++static void encodeDmaGoOverDBGINST(u32 * mcode_ptr, u8 chanNum, u32 mbufAddr, u8 m_secureBit) ++{ ++ u32 x; ++ u8 uDmaGo; /* DMAGO instruction */ ++ ++ if(chanNum > PL330_MAX_CHANNEL_NUM) { ++ print_warning("[%s] Channel number is too big ! : %d\n", __FUNCTION__, chanNum); ++ return; ++ } ++ ++ do ++ { ++ x = Inp32(mcode_ptr+DMA_DBGSTATUS); ++ } while ((x&0x1)==0x1); ++ ++ uDmaGo = (m_secureBit==0) ? ++ (0xa0|(0<<1)) : /* secure mode : M2M DMA only */ ++ (0xa0|(1<<1)); /* non-secure mode : M2P/P2M DMA only */ ++ ++ Outp32(mcode_ptr+DMA_DBGINST0, (chanNum<<24)|(uDmaGo<<16)|(chanNum<<8)|(0<<0)); ++ Outp32(mcode_ptr+DMA_DBGINST1, mbufAddr); ++ Outp32(mcode_ptr+DMA_DBGCMD, 0); /* 0 : execute the instruction that the DBGINST0,1 registers contain */ ++ ++} ++ ++/* DMAKILL over DBGINST[0:1] registers - Stop a DMA channel */ ++static void encodeDmaKillChannelOverDBGINST(u32 * mcode_ptr, u8 chanNum) ++{ ++ u32 x; ++ ++ if(chanNum > PL330_MAX_CHANNEL_NUM) { ++ print_warning("[%s] Channel number is too big ! : %d\n", __FUNCTION__, chanNum); ++ return; ++ } ++ ++ do ++ { ++ x = Inp32(mcode_ptr+DMA_DBGSTATUS); ++ } while ((x&0x1)==0x1); ++ ++ Outp32(mcode_ptr+DMA_DBGINST0, (0<<24)|(1<<16)|(chanNum<<8)|(1<<0)); /* issue instruction by channel thread */ ++ Outp32(mcode_ptr+DMA_DBGINST1, 0); ++ Outp32(mcode_ptr+DMA_DBGCMD, 0); /* 0 : execute the instruction that the DBGINST0,1 registers contain */ ++ ++ do ++ { ++ x = Inp32(mcode_ptr+DMA_DBGSTATUS); ++ } while ((x&0x1)==0x1); ++} ++ ++/* DMAKILL over DBGINST[0:1] registers - Stop a DMA controller (stop all of the channels) */ ++static void encodeDmaKillDMACOverDBGINST(u32 * mcode_ptr) ++{ ++ u32 x; ++ ++ do ++ { ++ x = Inp32(mcode_ptr+DMA_DBGSTATUS); ++ } while ((x&0x1)==0x1); ++ ++ Outp32(mcode_ptr+DMA_DBGINST0, (0<<24)|(1<<16)|(0<<8)|(0<<0)); /* issue instruction by manager thread */ ++ Outp32(mcode_ptr+DMA_DBGINST1, 0); ++ Outp32(mcode_ptr+DMA_DBGCMD, 0); /* 0 : execute the instruction that the DBGINST0,1 registers contain */ ++ ++ do ++ { ++ x = Inp32(mcode_ptr+DMA_DBGSTATUS); ++ } while ((x&0x1)==0x1); ++} ++ ++/*----------------------------------------------------------*/ ++/* Wrapper functions */ ++/*----------------------------------------------------------*/ ++ ++/* config_DMA_Go_command ++ * - make DMA GO command into the Debug Instruction register 0/1 ++ * ++ * mcode_ptr the buffer for PL330 DMAGO micro code to be stored into ++ * chanNum the DMA channel number to be started ++ * mbufAddr the start address of the buffer containing PL330 DMA micro codes ++ */ ++static void config_DMA_GO_command(u32 * mcode_ptr, int chanNum, u32 mbufAddr, int secureMode) ++{ ++ dma_debug("%s entered - channel Num=%d\n", __FUNCTION__, chanNum); ++ dma_debug("mcode_ptr=0x%p, mbufAddr=0x%x, secureMode=%d\n\n", mcode_ptr, mbufAddr, secureMode); ++ encodeDmaGoOverDBGINST(mcode_ptr, (u8)chanNum, mbufAddr, (u8)secureMode); ++} ++ ++/* config_DMA_stop_channel ++ * - stop the DMA channel working on ++ * mcode_ptr the buffer for PL330 DMAKILL micro code to be stored into ++ * chanNum the DMA channel number to be stopped ++ */ ++static void config_DMA_stop_channel(u32 * mcode_ptr, int chanNum) ++{ ++ dma_debug("%s entered - channel Num=%d\n", __FUNCTION__, chanNum); ++ encodeDmaKillChannelOverDBGINST(mcode_ptr, (u8)chanNum); ++} ++ ++/* config_DMA_stop_controller ++ * - stop the DMA controller ++ * mcode_ptr the buffer for PL330 DMAKILL micro code to be stored into ++ */ ++static void config_DMA_stop_controller(u32 * mcode_ptr) ++{ ++ dma_debug("%s entered - mcode_ptr=0x%p\n", __FUNCTION__, mcode_ptr); ++ encodeDmaKillDMACOverDBGINST(mcode_ptr); ++} ++ ++ ++/* config_DMA_start_address ++ * - set the DMA start address ++ * ++ * mcode_ptr the pointer to the buffer for PL330 DMAMOVE micro code to be stored into ++ * uStAddr the DMA start address ++ */ ++static int config_DMA_start_address(u8 * mcode_ptr, int uStAddr) ++{ ++ dma_debug("%s entered - start addr=0x%x\n", __FUNCTION__, uStAddr); ++ return encodeDmaMove(mcode_ptr, 0, (u32)uStAddr); ++} ++ ++ ++/* config_DMA_destination_address ++ * - set the DMA destination address ++ * ++ * mcode_ptr the pointer to the buffer for PL330 DMAMOVE micro code to be stored into ++ * uStAddr the DMA destination address ++ */ ++static int config_DMA_destination_address(u8 * mcode_ptr, int uStAddr) ++{ ++ dma_debug("%s entered - destination addr=0x%x\n", __FUNCTION__, uStAddr); ++ return encodeDmaMove(mcode_ptr, 2, (u32)uStAddr); ++} ++ ++ ++/* config_DMA_control ++ * - set the burst length, burst size, source and destination increment/fixed field ++ * ++ * mcode_ptr the pointer to the buffer for PL330 DMAMOVE micro code to be stored into ++ * dmacon the value for the DMA channel control register ++ */ ++static int config_DMA_control(u8 * mcode_ptr, pl330_DMA_control_t dmacon) ++{ ++ dma_debug("%s entered - dmacon : 0x%p\n", __FUNCTION__, &dmacon); ++ return encodeDmaMoveChCtrl(mcode_ptr, *(u32 *)&dmacon); ++} ++ ++ ++/* config_DMA_transfer_remainder ++ * - set the transfer size of the remainder ++ * ++ * mcode_ptr the pointer to the buffer for PL330 DMA micro code to be stored into ++ * lcRemainder the remainder except for the LC-aligned transfers ++ * dma_param the parameter set for a DMA operation ++ */ ++static int config_DMA_transfer_remainder(u8 * mcode_ptr, int lcRemainder, pl330_DMA_parameters_t dma_param) ++{ ++ int mcode_size = 0, msize = 0; ++ int lc0 = 0, lcSize = 0, mLoopStart0 = 0, dmaSent = 0; ++ ++ dma_debug("%s entered - lcRemainder=%d\n", __FUNCTION__, lcRemainder); ++ ++ dmaSent = dma_param.mTrSize - lcRemainder; ++ ++ msize = config_DMA_start_address(mcode_ptr+mcode_size, dma_param.mSrcAddr+dmaSent); ++ mcode_size+= msize; ++ ++ msize = config_DMA_destination_address(mcode_ptr+mcode_size, dma_param.mDstAddr+dmaSent); ++ mcode_size+= msize; ++ ++ dma_param.mControl.uSBSize = 0x2; /* 4 bytes */ ++ dma_param.mControl.uSBLength = 0x0; /* 1 transfer */ ++ dma_param.mControl.uDBSize = 0x2; /* 4 bytes */ ++ dma_param.mControl.uDBLength = 0x0; /* 1 transfer */ ++ ++ msize = config_DMA_control(mcode_ptr+mcode_size, dma_param.mControl); ++ mcode_size+= msize; ++ ++ lcSize = (dma_param.mControl.uSBLength+1)*(1< (8*1024*1024)) { ++ print_warning("[%s] The chunk size is too big !: %lu\n", __FUNCTION__, dma_param.mTrSize); ++ return 0; ++ } ++ break; ++ ++ case PL330_M2P_DMA: ++ case PL330_P2M_DMA: ++ if(dma_param.mTrSize > (2*1024*1024)) { ++ print_warning("[%s] The chunk size is too big !: %lu\n", __FUNCTION__, dma_param.mTrSize); ++ return 0; ++ } ++ break; ++ ++ case PL330_P2P_DMA: ++ print_warning("[%s] P2P DMA selected !\n", __FUNCTION__); ++ break; ++ ++ default: ++ print_warning("[%s] Invaild DMA direction entered !\n", __FUNCTION__); ++ break; ++ } ++ ++ lcSize = (dma_param.mControl.uSBLength+1)*(1< PL330_MAX_ITERATION_NUM) { ++ lc1 = lc0/PL330_MAX_ITERATION_NUM; ++ dma_debug(" Inner loop : lc1=%d\n", lc1); ++ ++ if(lc1 <= PL330_MAX_ITERATION_NUM) { ++ msize = encodeDmaLoop(mcode_ptr+mcode_size, 1, lc1-1); ++ mcode_size+= msize; ++ mLoopStart1 = mcode_size; ++ ++ msize = encodeDmaLoop(mcode_ptr+mcode_size, 0, PL330_MAX_ITERATION_NUM-1); ++ mcode_size+= msize; ++ mLoopStart0 = mcode_size; ++ ++ switch(dma_param.mDirection) { ++ case PL330_M2M_DMA: ++ msize = encodeDmaLoad(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaReadMemBarrier(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaStore(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_M2P_DMA: ++ msize = encodeDmaWaitForPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaLoad(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaStorePeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaFlushPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_P2M_DMA: ++ msize = encodeDmaWaitForPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaLoadPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaStore(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaFlushPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_P2P_DMA: ++ print_warning("[%s] P2P DMA selected !\n", __FUNCTION__); ++ break; ++ ++ default: ++ print_warning("[%s] Invaild DMA direction selected !\n", __FUNCTION__); ++ break; ++ } ++ ++ msize = encodeDmaLoopEnd(mcode_ptr+mcode_size, 0, (u8)(mcode_size-mLoopStart0)); ++ mcode_size+= msize; ++ ++ msize = encodeDmaLoopEnd(mcode_ptr+mcode_size, 1, (u8)(mcode_size-mLoopStart1)); ++ mcode_size+= msize; ++ ++ lc0 = lc0 - (lc1*PL330_MAX_ITERATION_NUM); ++ } ++ else { ++ print_warning("[%s] The transfer size is over the limit (lc1=%d)\n", __FUNCTION__, lc1); ++ } ++ } ++ ++ if(lc0 > 0) { ++ dma_debug("Single loop : lc0=%d\n", lc0); ++ msize = encodeDmaLoop(mcode_ptr+mcode_size, 0, lc0-1); ++ mcode_size+= msize; ++ mLoopStart0 = mcode_size; ++ ++ switch(dma_param.mDirection) { ++ case PL330_M2M_DMA: ++ msize = encodeDmaLoad(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaStore(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_M2P_DMA: ++ msize = encodeDmaWaitForPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaLoad(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaStorePeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaFlushPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_P2M_DMA: ++ msize = encodeDmaWaitForPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaLoadPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ msize = encodeDmaStore(mcode_ptr+mcode_size); ++ mcode_size+= msize; ++ msize = encodeDmaFlushPeri(mcode_ptr+mcode_size, (u8)dma_param.mPeriNum); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_P2P_DMA: ++ print_warning("[%s] P2P DMA selected !\n", __FUNCTION__); ++ break; ++ ++ default: ++ break; ++ } ++ ++ msize = encodeDmaLoopEnd(mcode_ptr+mcode_size, 0, (u8)(mcode_size-mLoopStart0)); ++ mcode_size+= msize; ++ } ++ ++ if(lcRemainder !=0) { ++ msize = config_DMA_transfer_remainder(mcode_ptr+mcode_size, lcRemainder, dma_param); ++ mcode_size += msize; ++ } ++ ++ return mcode_size; ++} ++ ++ ++/* config_DMA_transfer_size_for_oneNAND ++ * - set the transfer size ++ * ++ * mcode_ptr the pointer to the buffer for PL330 DMA micro code to be stored into ++ * dma_param the parameter set for a DMA operation ++ */ ++#define ONENAND_PAGE_SIZE 2048 ++#define ONENAND_OOB_SIZE 64 ++#define ONENAND_PAGE_WITH_OOB (ONENAND_PAGE_SIZE+ONENAND_OOB_SIZE) ++#define MAX_ONENAND_PAGE_CNT 64 ++ ++static int config_DMA_transfer_size_for_oneNAND(u8 * mcode_ptr, pl330_DMA_parameters_t dma_param) ++{ ++ int i = 0, pageCnt =0; ++ int mcode_size = 0, msize = 0; ++ int lc0 = 0, lcSize = 0; ++ int mLoopStart = 0; ++ ++ dma_debug("%s entered\n", __FUNCTION__); ++ ++ if(dma_param.mTrSize > (MAX_ONENAND_PAGE_CNT*ONENAND_PAGE_WITH_OOB)) { ++ print_warning("[%s] The chunk size is too big !: %lu\n", __FUNCTION__, dma_param.mTrSize); ++ return 0; ++ } ++ ++ /* Buffer address on SDRAM */ ++ switch(dma_param.mDirection) { ++ case PL330_M2P_DMA: /* Write into oneNAND */ ++ msize = config_DMA_start_address(mcode_ptr+mcode_size, dma_param.mSrcAddr); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_P2M_DMA: /* Read from oneNAND */ ++ msize = config_DMA_destination_address(mcode_ptr+mcode_size, dma_param.mDstAddr); ++ mcode_size+= msize; ++ break; ++ ++ case PL330_P2P_DMA: ++ case PL330_M2M_DMA: ++ default: ++ print_warning("[%s] Invaild DMA direction selected !\n", __FUNCTION__); ++ break; ++ } ++ ++ lcSize = (dma_param.mControl.uSBLength+1)*(1< ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "dma-pl330-mcode.h" ++ ++#undef pr_debug ++//#define dma_dbg ++ ++#ifdef dma_dbg ++#define pr_debug(fmt...) printk( fmt) ++#else ++#define pr_debug(fmt...) ++#endif ++ ++/* io map for dma */ ++static void __iomem *dma_base; ++static struct kmem_cache *dma_kmem; ++ ++static int dma_channels; ++struct s3c_dma_selection dma_sel; ++static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; ++ ++/* dma channel state information */ ++struct s3c2410_dma_chan s3c_dma_chans[S3C_DMA_CHANNELS]; ++s3c_dma_controller_t s3c_dma_cntlrs[S3C_DMA_CONTROLLERS]; ++ ++#define SIZE_OF_MICRO_CODES 512 ++#define PL330_NON_SECURE_DMA 1 ++#define PL330_SECURE_DMA 0 ++ ++#define BUF_MAGIC (0xcafebabe) ++ ++#define dmawarn(fmt...) printk(KERN_DEBUG fmt) ++ ++#define dma_regaddr(dcon, reg) ((dcon)->regs + (reg)) ++#define dma_wrreg(dcon, reg, val) writel((val), (dcon)->regs + (reg)) ++#define dma_rdreg(dcon, reg) readl((dcon)->regs + (reg)) ++ ++#define dbg_showregs(chan) do { } while(0) ++#define dbg_showchan(chan) do { } while(0) ++ ++void s3c_dma_dump(int dcon_num, int channel) ++{ ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_DS); ++ printk("%d dcon_num %d chnnel : DMA status %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_DPC); ++ printk("%d dcon_num %d chnnel : DMA program counter %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INTEN); ++ printk("%d dcon_num %d chnnel : INT enable %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_ES); ++ printk("%d dcon_num %d chnnel : Event status %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INTSTATUS); ++ printk("%d dcon_num %d chnnel : INT status %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_FSC); ++ printk("%d dcon_num %d chnnel : Fault status %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_FTC(channel)); ++ printk("%d dcon_num %d chnnel : Fault type %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CS(channel)); ++ printk("%d dcon_num %d chnnel : Channel status %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_CPC(channel)); ++ printk("%d dcon_num %d chnnel : Channel program counter %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_SA(channel)); ++ printk("%d dcon_num %d chnnel : Source address %lx\n", dcon_num, channel, tmp); ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_DA(channel)); ++ printk("%d dcon_num %d chnnel : Destination address %lx\n", dcon_num, channel, tmp); ++} ++ ++ ++/* lookup_dma_channel ++ * ++ * change the dma channel number given into a real dma channel id ++ */ ++ ++static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) ++{ ++ if (channel & DMACH_LOW_LEVEL) ++ return &s3c_dma_chans[channel & ~DMACH_LOW_LEVEL]; ++ else ++ return dma_chan_map[channel]; ++} ++ ++/* s3c_dma_stats_timeout ++ * ++ * Update DMA stats from timeout info ++ */ ++static void s3c_dma_stats_timeout(struct s3c_dma_stats * stats, int val) ++{ ++ if (stats == NULL) ++ return; ++ ++ if (val > stats->timeout_longest) ++ stats->timeout_longest = val; ++ if (val < stats->timeout_shortest) ++ stats->timeout_shortest = val; ++ ++ stats->timeout_avg += val; ++} ++ ++void s3c_enable_dmac(unsigned int dcon_num) ++{ ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ start_DMA_controller(dma_regaddr(dma_controller, S3C_DMAC_DBGSTATUS)); ++} ++ ++void s3c_disable_dmac(unsigned int dcon_num) ++{ ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ stop_DMA_controller(dma_regaddr(dma_controller, S3C_DMAC_DBGSTATUS)); ++} ++ ++void s3c_clear_interrupts (int dcon_num, int channel) ++{ ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = &s3c_dma_cntlrs[dcon_num]; ++ ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INTCLR); ++ tmp |= (1 << channel); ++ dma_wrreg(dma_controller, S3C_DMAC_INTCLR, tmp); ++} ++ ++/* s3c_dma_waitforload ++ * ++ * wait for the DMA engine to load a buffer, and update the state accordingly ++ */ ++static int s3c_dma_waitforload(struct s3c2410_dma_chan *chan, int line) ++{ ++ int timeout = chan->load_timeout; ++ int took; ++ ++ pr_debug("%s channel number : %d\n", __FUNCTION__, chan->number); ++ ++ if (chan->load_state != S3C_DMALOAD_1LOADED) { ++ printk(KERN_ERR ++ "dma CH %d: s3c_dma_waitforload() called in loadstate %d from line %d\n", ++ chan->number, chan->load_state, line); ++ return 0; ++ } ++ ++ if (chan->stats != NULL) ++ chan->stats->loads++; ++ ++ while (--timeout > 0) { ++ //if ((dma_rdreg(chan->dma_con, S3C_DMAC_CS(chan->number))) & S3C_DMAC_CS_EXECUTING) { ++ took = chan->load_timeout - timeout; ++ s3c_dma_stats_timeout(chan->stats, took); ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_1LOADED: ++ chan->load_state = S3C_DMALOAD_1RUNNING; ++ break; ++ ++ default: ++ printk(KERN_ERR ++ "dma CH %d: unknown load_state in s3c_dma_waitforload() %d\n", ++ chan->number, chan->load_state); ++ } ++ return 1; ++ //} ++ } ++ ++ if (chan->stats != NULL) { ++ chan->stats->timeout_failed++; ++ } ++ ++ return 0; ++} ++ ++ ++/* s3c_dma_loadbuffer ++ * ++ * load a buffer, and update the channel state ++ */ ++static inline int s3c_dma_loadbuffer(struct s3c2410_dma_chan *chan, ++ struct s3c_dma_buf *buf) ++{ ++ unsigned long tmp; ++ pl330_DMA_parameters_t dma_param; ++ struct s3c_dma_buf *firstbuf; ++ int bwJump = 0; ++ ++ memset(&dma_param, 0, sizeof(pl330_DMA_parameters_t)); ++ pr_debug("s3c_chan_loadbuffer: loading buffer %p (0x%08lx,0x%06x)\n", ++ buf, (unsigned long) buf->data, buf->size); ++ ++ if (buf == NULL) { ++ dmawarn("buffer is NULL\n"); ++ return -EINVAL; ++ } ++ ++ pr_debug("%s: DMA CCR - %08x\n", __FUNCTION__, chan->dcon); ++ pr_debug("%s: DMA Loop count - %08x\n", __FUNCTION__, (buf->size / chan->xfer_unit)); ++ ++ firstbuf = buf; ++ ++ do { ++ dma_param.mPeriNum = chan->config_flags; ++ dma_param.mDirection = chan->source; ++ ++ switch (dma_param.mDirection) { ++ case S3C2410_DMASRC_MEM: /* source is Memory : Mem-to-Peri (Write into FIFO) */ ++ dma_param.mSrcAddr = buf->data; ++ dma_param.mDstAddr = chan->dev_addr; ++ break; ++ ++ case S3C2410_DMASRC_HW: /* source is peripheral : Peri-to-Mem (Read from FIFO) */ ++ dma_param.mSrcAddr = chan->dev_addr; ++ dma_param.mDstAddr = buf->data; ++ break; ++ ++ case S3C_DMA_MEM2MEM: /* source & Destination : Mem-to-Mem */ ++ dma_param.mSrcAddr = chan->dev_addr; ++ dma_param.mDstAddr = buf->data; ++ break; ++ ++ case S3C_DMA_MEM2MEM_SET: /* source & Destination : Mem-to-Mem */ ++ dma_param.mDirection = S3C_DMA_MEM2MEM; ++ dma_param.mSrcAddr = chan->dev_addr; ++ dma_param.mDstAddr = buf->data; ++ break; ++ ++ case S3C_DMA_PER2PER: ++ default: ++ printk("Peripheral-to-Peripheral DMA NOT YET implemented !! \n"); ++ return -EINVAL; ++ } ++ ++ dma_param.mTrSize = buf->size; ++ ++ dma_param.mLoop = 0; ++ dma_param.mControl = *(pl330_DMA_control_t *) &chan->dcon; ++ ++ chan->next = buf->next; ++ buf = chan->next; ++ ++ if(buf==NULL) { ++ firstbuf->next = NULL; ++ dma_param.mLastReq = 1; ++ dma_param.mIrqEnable = 1; ++ } ++ else { ++ dma_param.mLastReq = 0; ++ dma_param.mIrqEnable = 0; ++ } ++ ++ bwJump += setup_DMA_channel(((u8 *)firstbuf->mcptr_cpu)+bwJump, dma_param, chan->number); ++ pr_debug("%s: DMA bwJump - %d\n", __FUNCTION__, bwJump); ++ ++ }while(buf != NULL); ++ ++ if(dma_param.mIrqEnable) { ++ tmp = dma_rdreg(chan->dma_con, S3C_DMAC_INTEN); ++ tmp |= (1 << chan->number); ++ dma_wrreg(chan->dma_con, S3C_DMAC_INTEN, tmp); ++ } ++ ++ /* update the state of the channel */ ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_NONE: ++ chan->load_state = S3C_DMALOAD_1LOADED; ++ break; ++ ++ case S3C_DMALOAD_1RUNNING: ++ chan->load_state = S3C_DMALOAD_1LOADED_1RUNNING; ++ break; ++ ++ default: ++ dmawarn("dmaload: unknown state %d in loadbuffer\n", chan->load_state); ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/* s3c_dma_call_op ++ * ++ * small routine to call the o routine with the given op if it has been ++ * registered ++ */ ++static void s3c_dma_call_op(struct s3c2410_dma_chan * chan, enum s3c_chan_op op) ++{ ++ if (chan->op_fn != NULL) { ++ (chan->op_fn) (chan, op); ++ } ++} ++ ++/* s3c_dma_buffdone ++ * ++ * small wrapper to check if callback routine needs to be called, and ++ * if so, call it ++ */ ++static inline void s3c_dma_buffdone(struct s3c2410_dma_chan * chan, ++ struct s3c_dma_buf * buf, ++ enum s3c2410_dma_buffresult result) ++{ ++ pr_debug("callback_fn will be called=%p, buf=%p, id=%p, size=%d, result=%d\n", ++ chan->callback_fn, buf, buf->id, buf->size, result); ++ ++ if (chan->callback_fn != NULL) { ++ (chan->callback_fn) (chan, buf->id, buf->size, result); ++ } ++} ++ ++/* s3c_dma_start ++ * ++ * start a dma channel going ++ */ ++static int s3c_dma_start(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long flags; ++ ++ pr_debug("s3c_start_dma: channel number=%d, index=%d\n", chan->number, chan->index); ++ ++ local_irq_save(flags); ++ ++ if (chan->state == S3C_DMA_RUNNING) { ++ pr_debug("s3c_start_dma: already running (%d)\n", chan->state); ++ local_irq_restore(flags); ++ return 0; ++ } ++ ++ chan->state = S3C_DMA_RUNNING; ++ ++ /* check wether there is anything to load, and if not, see ++ * if we can find anything to load ++ */ ++ ++ if (chan->load_state == S3C_DMALOAD_NONE) { ++ if (chan->next == NULL) { ++ printk(KERN_ERR "dma CH %d: dcon_num has nothing loaded\n", chan->number); ++ chan->state = S3C_DMA_IDLE; ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ s3c_dma_loadbuffer(chan, chan->next); ++ } ++ ++ dbg_showchan(chan); ++ ++ /* enable the channel */ ++ ++ if (!chan->irq_enabled) { ++ enable_irq(chan->irq); ++ chan->irq_enabled = 1; ++ } ++ ++ start_DMA_channel(dma_regaddr(chan->dma_con, S3C_DMAC_DBGSTATUS), chan->number, ++ chan->curr->mcptr, PL330_NON_SECURE_DMA); ++ ++ /* Start the DMA operation on Peripheral */ ++ s3c_dma_call_op(chan, S3C2410_DMAOP_START); ++ ++ dbg_showchan(chan); ++ ++ local_irq_restore(flags); ++ return 0; ++} ++ ++ ++/* s3c_dma_canload ++ * ++ * work out if we can queue another buffer into the DMA engine ++ */ ++ ++ ++static int s3c_dma_canload(struct s3c2410_dma_chan * chan) ++{ ++ if (chan->load_state == S3C_DMALOAD_NONE || chan->load_state == S3C_DMALOAD_1RUNNING) ++ return 1; ++ ++ return 0; ++} ++ ++ ++ ++/* s3c2410_dma_enqueue ++ * ++ * queue an given buffer for dma transfer. ++ * ++ * id the device driver's id information for this buffer ++ * data the physical address of the buffer data ++ * size the size of the buffer in bytes ++ * ++ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART ++ * is checked, and if set, the channel is started. If this flag isn't set, ++ * then an error will be returned. ++ * ++ * It is possible to queue more than one DMA buffer onto a channel at ++ * once, and the code will deal with the re-loading of the next buffer ++ * when necessary. ++ */ ++int s3c2410_dma_enqueue(unsigned int channel, void *id, ++ dma_addr_t data, int size) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ struct s3c_dma_buf *buf; ++ unsigned long flags; ++ ++ pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int) data, size); ++ ++ buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); ++ if (buf == NULL) { ++ printk(KERN_ERR "dma <%d> no memory for buffer\n", channel); ++ return -ENOMEM; ++ } ++ ++ pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); ++ ++ buf->next = NULL; ++ buf->data = buf->ptr = data; ++ buf->size = size; ++ buf->id = id; ++ buf->magic = BUF_MAGIC; ++ ++ local_irq_save(flags); ++ ++ buf->mcptr_cpu = dma_alloc_coherent(NULL, SIZE_OF_MICRO_CODES, &buf->mcptr, GFP_ATOMIC); ++ ++ if (buf->mcptr_cpu == NULL) { ++ printk(KERN_ERR "%s: failed to allocate memory for micro codes\n", __FUNCTION__); ++ return -ENOMEM; ++ } ++ ++ if (chan->curr == NULL) { ++ /* we've got nothing loaded... */ ++ pr_debug("%s: buffer %p queued onto empty channel\n", __FUNCTION__, buf); ++ ++ chan->curr = buf; ++ chan->end = buf; ++ chan->next = NULL; ++ } else { ++ pr_debug("dma CH %d: %s: buffer %p queued onto non-empty channel\n", ++ chan->number, __FUNCTION__, buf); ++ ++ if (chan->end == NULL) /* In case of flushing */ ++ pr_debug("dma CH %d: %s: %p not empty, and chan->end==NULL?\n", ++ chan->number, __FUNCTION__, chan); ++ else { ++ chan->end->next = buf; ++ chan->end = buf; ++ } ++ } ++ ++ /* if necessary, update the next buffer field */ ++ if (chan->next == NULL) ++ chan->next = buf; ++ ++ /* check to see if we can load a buffer */ ++ if (chan->state == S3C_DMA_RUNNING) { ++ if (chan->load_state == S3C_DMALOAD_1LOADED && 1) { ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ printk(KERN_ERR "dma CH %d: loadbuffer:" ++ "timeout loading buffer\n", chan->number); ++ dbg_showchan(chan); ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ } ++ ++ } else if (chan->state == S3C_DMA_IDLE) { ++ if (chan->flags & S3C2410_DMAF_AUTOSTART) { ++ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_START); ++ } else { ++ pr_debug("loading onto stopped channel\n"); ++ } ++ } ++ ++ local_irq_restore(flags); ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_enqueue); ++ ++static inline void s3c_dma_freebuf(struct s3c_dma_buf * buf) ++{ ++ int magicok = (buf->magic == BUF_MAGIC); ++ ++ buf->magic = -1; ++ ++ if (magicok) { ++ local_irq_enable(); ++ dma_free_coherent(NULL, SIZE_OF_MICRO_CODES, buf->mcptr_cpu, buf->mcptr); ++ local_irq_disable(); ++ ++ kmem_cache_free(dma_kmem, buf); ++ } else { ++ printk("s3c_dma_freebuf: buff %p with bad magic\n", buf); ++ } ++} ++ ++/* s3c_dma_lastxfer ++ * ++ * called when the system is out of buffers, to ensure that the channel ++ * is prepared for shutdown. ++ */ ++static inline void s3c_dma_lastxfer(struct s3c2410_dma_chan *chan) ++{ ++ pr_debug("DMA CH %d: s3c_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_NONE: ++ pr_debug("DMA CH %d: s3c_dma_lastxfer: load_state : S3C2410_DMALOAD_NONE %d\n", chan->number); ++ break; ++ ++ case S3C_DMALOAD_1LOADED: ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ /* flag error? */ ++ printk(KERN_ERR "dma CH %d: timeout waiting for load\n", chan->number); ++ return; ++ } ++ break; ++ ++ default: ++ pr_debug("dma CH %d: lastxfer: unhandled load_state %d with no next", ++ chan->number, chan->load_state); ++ return; ++ ++ } ++ ++} ++ ++ ++#define dmadbg2(x...) ++ ++static irqreturn_t s3c_dma_irq(int irq, void *devpw) ++{ ++ unsigned int channel = 0, dcon_num, i; ++ unsigned long tmp; ++ s3c_dma_controller_t *dma_controller = (s3c_dma_controller_t *) devpw; ++ ++ struct s3c2410_dma_chan *chan=NULL; ++ struct s3c_dma_buf *buf; ++ ++ dcon_num = dma_controller->number; ++ tmp = dma_rdreg(dma_controller, S3C_DMAC_INTSTATUS); ++ pr_debug("# s3c_dma_irq: IRQ status : 0x%x\n", tmp); ++ ++ for (i = 0; i < S3C_CHANNELS_PER_DMA; i++) { ++ if (tmp & 0x01) { ++ ++ pr_debug("# DMAC %d: requestor %d\n", dcon_num, i); ++ ++ channel = i; ++ chan = &s3c_dma_chans[channel + dcon_num * S3C_CHANNELS_PER_DMA]; ++ pr_debug("# DMA CH:%d, index:%d load_state:%d\n", chan->number, chan->index, chan->load_state); ++ ++ buf = chan->curr; ++ ++ dbg_showchan(chan); ++ ++ /* modify the channel state */ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_1RUNNING: ++ /* TODO - if we are running only one buffer, we probably ++ * want to reload here, and then worry about the buffer ++ * callback */ ++ ++ chan->load_state = S3C_DMALOAD_NONE; ++ break; ++ ++ case S3C_DMALOAD_1LOADED: ++ /* iirc, we should go back to NONE loaded here, we ++ * had a buffer, and it was never verified as being ++ * loaded. ++ */ ++ ++ chan->load_state = S3C_DMALOAD_NONE; ++ break; ++ ++ case S3C_DMALOAD_1LOADED_1RUNNING: ++ /* we'll worry about checking to see if another buffer is ++ * ready after we've called back the owner. This should ++ * ensure we do not wait around too long for the DMA ++ * engine to start the next transfer ++ */ ++ ++ chan->load_state = S3C_DMALOAD_1LOADED; ++ break; ++ ++ case S3C_DMALOAD_NONE: ++ printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", ++ chan->number); ++ break; ++ ++ default: ++ printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", ++ chan->number, chan->load_state); ++ break; ++ } ++ ++ if (buf != NULL) { ++ /* update the chain to make sure that if we load any more ++ * buffers when we call the callback function, things should ++ * work properly */ ++ ++ chan->curr = buf->next; ++ buf->next = NULL; ++ ++ if (buf->magic != BUF_MAGIC) { ++ printk(KERN_ERR "dma CH %d: %s: buf %p incorrect magic\n", ++ chan->number, __FUNCTION__, buf); ++ goto next_channel; ++ } ++ ++ s3c_dma_buffdone(chan, buf, S3C2410_RES_OK); ++ ++ /* free resouces */ ++ s3c_dma_freebuf(buf); ++ } else { ++ } ++ ++ /* only reload if the channel is still running... our buffer done ++ * routine may have altered the state by requesting the dma channel ++ * to stop or shutdown... */ ++ ++ if (chan->next != NULL && chan->state != S3C_DMA_IDLE) { ++ unsigned long flags; ++ ++ switch (chan->load_state) { ++ case S3C_DMALOAD_1RUNNING: ++ /* don't need to do anything for this state */ ++ break; ++ ++ case S3C_DMALOAD_NONE: ++ /* can load buffer immediately */ ++ break; ++ ++ case S3C_DMALOAD_1LOADED: ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ /* flag error? */ ++ printk(KERN_ERR "dma CH %d: timeout waiting for load\n", ++ chan->number); ++ goto next_channel; ++ } ++ ++ break; ++ ++ case S3C_DMALOAD_1LOADED_1RUNNING: ++ goto next_channel; ++ ++ default: ++ printk(KERN_ERR "dma CH %d: unknown load_state in irq, %d\n", ++ chan->number, chan->load_state); ++ goto next_channel; ++ } ++ ++ local_irq_save(flags); ++ s3c_dma_loadbuffer(chan, chan->next); ++ start_DMA_channel(dma_regaddr(chan->dma_con, S3C_DMAC_DBGSTATUS), chan->number, ++ chan->curr->mcptr, PL330_NON_SECURE_DMA); ++ ++ local_irq_restore(flags); ++ ++ } else { ++ s3c_dma_lastxfer(chan); ++ ++ /* see if we can stop this channel.. */ ++ if (chan->load_state == S3C_DMALOAD_NONE) { ++ pr_debug("# DMA CH %d - (index:%d): end of transfer, stopping channel (%ld)\n", ++ chan->number, chan->index, jiffies); ++ s3c2410_dma_ctrl(chan->index | DMACH_LOW_LEVEL, S3C2410_DMAOP_STOP); ++ } ++ } ++ } ++ ++next_channel: ++ tmp >>= 1; ++ ++ } ++ ++ s3c_clear_interrupts(chan->dma_con->number, chan->number); ++ ++ return IRQ_HANDLED; ++} ++ ++static struct s3c2410_dma_chan *s3c_dma_map_channel(int channel); ++ ++/* s3c2410_dma_request ++ * ++ * get control of an dma channel ++*/ ++ ++int s3c2410_dma_request(unsigned int channel, ++ struct s3c2410_dma_client *client, ++ void *dev) ++{ ++ struct s3c2410_dma_chan *chan; ++ unsigned long flags; ++ int err; ++ ++ pr_debug("DMA CH %d: s3c2410_request_dma: client=%s, dev=%p\n", ++ channel, client->name, dev); ++ ++ local_irq_save(flags); ++ ++ chan = s3c_dma_map_channel(channel); ++ if (chan == NULL) { ++ local_irq_restore(flags); ++ return -EBUSY; ++ } ++ ++ dbg_showchan(chan); ++ ++ chan->client = client; ++ chan->in_use = 1; ++ ++ chan->dma_con->in_use++; ++ ++ if (!chan->irq_claimed) { ++ pr_debug("DMA CH %d: %s : requesting irq %d\n", ++ channel, __FUNCTION__, chan->irq); ++ ++ chan->irq_claimed = 1; ++ local_irq_restore(flags); ++ ++ err = request_irq(chan->irq, s3c_dma_irq, IRQF_DISABLED, ++ client->name, (void *) chan->dma_con); ++ ++ local_irq_save(flags); ++ ++ if (err) { ++ chan->in_use = 0; ++ chan->irq_claimed = 0; ++ chan->dma_con->in_use--; ++ local_irq_restore(flags); ++ ++ printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", ++ client->name, chan->irq, chan->number); ++ return err; ++ } ++ ++ chan->irq_enabled = 1; ++ ++ /* enable the main dma.. this can be disabled ++ * when main channel use count is 0 */ ++ s3c_enable_dmac(chan->dma_con->number); ++ } ++ ++ s3c_clear_interrupts(chan->dma_con->number, chan->number); ++ local_irq_restore(flags); ++ ++ /* need to setup */ ++ ++ pr_debug("%s: channel initialised, %p, number:%d, index:%d\n", __FUNCTION__, chan, chan->number, chan->index); ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_request); ++ ++/* s3c2410_dma_free ++ * ++ * release the given channel back to the system, will stop and flush ++ * any outstanding transfers, and ensure the channel is ready for the ++ * next claimant. ++ * ++ * Note, although a warning is currently printed if the freeing client ++ * info is not the same as the registrant's client info, the free is still ++ * allowed to go through. ++ */ ++int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) ++{ ++ unsigned long flags; ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ pr_debug("%s: DMA channel %d will be stopped\n", __FUNCTION__, chan->number); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ local_irq_save(flags); ++ ++ if (chan->client != client) { ++ printk(KERN_WARNING ++ "DMA CH %d: possible free from different client (channel %p, passed %p)\n", ++ channel, chan->client, client); ++ } ++ ++ /* sort out stopping and freeing the channel */ ++ ++ if (chan->state != S3C_DMA_IDLE) { ++ pr_debug("%s: need to stop dma channel %p\n", __FUNCTION__, chan); ++ ++ /* possibly flush the channel */ ++ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); ++ } ++ ++ chan->client = NULL; ++ chan->in_use = 0; ++ ++ chan->dma_con->in_use--; ++ ++ if (chan->irq_claimed) ++ free_irq(chan->irq, (void *)chan->dma_con); ++ ++ chan->irq_claimed = 0; ++ ++ if (!(channel & DMACH_LOW_LEVEL)) ++ dma_chan_map[channel] = NULL; ++ ++ local_irq_restore(flags); ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_free); ++ ++ ++static int s3c_dma_dostop(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long flags; ++ ++ pr_debug("%s: DMA Channel No : %d\n", __FUNCTION__, chan->number); ++ ++ dbg_showchan(chan); ++ ++ local_irq_save(flags); ++ ++ s3c_dma_call_op(chan, S3C2410_DMAOP_STOP); ++ ++ stop_DMA_channel(dma_regaddr(chan->dma_con, S3C_DMAC_DBGSTATUS), chan->number); ++ ++ chan->state = S3C_DMA_IDLE; ++ chan->load_state = S3C_DMALOAD_NONE; ++ ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++static void s3c_dma_showchan(struct s3c2410_dma_chan * chan) ++{ ++ ++} ++ ++/* s3c_dma_flush ++ * ++ * stop the channel, and remove all current and pending transfers ++ */ ++ ++void s3c_waitforstop(struct s3c2410_dma_chan *chan) ++{ ++ ++} ++ ++static int s3c_dma_flush(struct s3c2410_dma_chan *chan) ++{ ++ struct s3c_dma_buf *buf, *next; ++ unsigned long flags; ++ ++ pr_debug("%s:\n", __FUNCTION__); ++ ++ local_irq_save(flags); ++ ++ s3c_dma_showchan(chan); ++ ++ if (chan->state != S3C_DMA_IDLE) { ++ pr_debug("%s: stopping channel...\n", __FUNCTION__); ++ s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); ++ } ++ ++ buf = chan->curr; ++ if (buf == NULL) ++ buf = chan->next; ++ ++ chan->curr = chan->next = chan->end = NULL; ++ chan->load_state = S3C_DMALOAD_NONE; ++ ++ if (buf != NULL) { ++ for (; buf != NULL; buf = next) { ++ next = buf->next; ++ ++ pr_debug("%s: free buffer %p, next %p\n", __FUNCTION__, buf, buf->next); ++ ++ s3c_dma_buffdone(chan, buf, S3C2410_RES_ABORT); ++ s3c_dma_freebuf(buf); ++ } ++ } ++ //s3c_dma_waitforstop(chan); ++ ++ s3c_dma_showchan(chan); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++int s3c_dma_started(struct s3c2410_dma_chan *chan) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ dbg_showchan(chan); ++ ++ /* if we've only loaded one buffer onto the channel, then chec ++ * to see if we have another, and if so, try and load it so when ++ * the first buffer is finished, the new one will be loaded onto ++ * the channel */ ++ ++ if (chan->next != NULL) { ++ if (chan->load_state == S3C_DMALOAD_1LOADED) { ++ ++ if (s3c_dma_waitforload(chan, __LINE__) == 0) { ++ pr_debug("%s: buff not yet loaded, no more todo\n", ++ __FUNCTION__); ++ } else { ++ chan->load_state = S3C_DMALOAD_1RUNNING; ++ s3c_dma_loadbuffer(chan, chan->next); ++ } ++ ++ } else if (chan->load_state == S3C_DMALOAD_1RUNNING) { ++ s3c_dma_loadbuffer(chan, chan->next); ++ } ++ } ++ ++ local_irq_restore(flags); ++ ++ return 0; ++ ++} ++ ++int s3c2410_dma_ctrl(dmach_t channel, enum s3c_chan_op op) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ switch (op) { ++ case S3C2410_DMAOP_START: ++ return s3c_dma_start(chan); ++ ++ case S3C2410_DMAOP_STOP: ++ return s3c_dma_dostop(chan); ++ ++ case S3C2410_DMAOP_PAUSE: ++ case S3C2410_DMAOP_RESUME: ++ return -ENOENT; ++ ++ case S3C2410_DMAOP_FLUSH: ++ return s3c_dma_flush(chan); ++ ++ case S3C2410_DMAOP_STARTED: ++ return s3c_dma_started(chan); ++ ++ case S3C2410_DMAOP_TIMEOUT: ++ return 0; ++ ++ } ++ ++ printk("Invalid operation entered \n"); ++ return -ENOENT; /* unknown, don't bother */ ++} ++EXPORT_SYMBOL(s3c2410_dma_ctrl); ++ ++ ++/* s3c2410_dma_config ++ * ++ * xfersize: size of unit in bytes (1,2,4) ++ * dcon: base value of the DCONx register ++ */ ++int s3c2410_dma_config(dmach_t channel, ++ int xferunit, ++ int dcon) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", ++ __FUNCTION__, channel, xferunit, dcon); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); ++ ++ dcon |= chan->dcon & dma_sel.dcon_mask; ++ ++ pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); ++ ++ switch (xferunit) { ++ case 1: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_BYTE; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_BYTE; ++ break; ++ ++ case 2: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_HWORD; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_HWORD; ++ break; ++ ++ case 4: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_WORD; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_WORD; ++ break; ++ ++ case 8: ++ dcon |= S3C_DMACONTROL_SRC_WIDTH_DWORD; ++ dcon |= S3C_DMACONTROL_DEST_WIDTH_DWORD; ++ break; ++ ++ default: ++ printk("%s: Bad transfer size %d\n", __FUNCTION__, xferunit); ++ return -EINVAL; ++ } ++ ++ pr_debug("%s: DMA Channel control : %08x\n", __FUNCTION__, dcon); ++ ++ dcon |= chan->control_flags; ++ pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); ++ ++ /* For DMCCxControl 0 */ ++ chan->dcon = dcon; ++ ++ /* For DMACCxControl 1 : xferunit means transfer width.*/ ++ chan->xfer_unit = xferunit; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_config); ++ ++int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); ++ ++ chan->flags = flags; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_setflags); ++ ++ ++/* do we need to protect the settings of the fields from ++ * irq? ++ */ ++ ++int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); ++ ++ chan->op_fn = rtn; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_set_opfn); ++ ++ ++int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) ++{ ++ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); ++ ++ if (chan == NULL) ++ return -EINVAL; ++ ++ pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); ++ ++ chan->callback_fn = rtn; ++ ++ return 0; ++} ++EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); ++ ++ ++/* s3c2410_dm