/**************************************************************************** * * Copyright (c) 2006 Dave Hylands * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Alternatively, this software may be distributed under the terms of BSD * license. * * See README and COPYING for more details. * ****************************************************************************/ /** * * @file i2c.h * * @brief Global definitions for interfacing with the AVR TWI (aka I2C) * hardware * ****************************************************************************/ /** * @defgroup xxx Readable version of xxx. * * @brief Brief description of what xxx does. * * Longer description of what xxx does. * ****************************************************************************/ #if !defined( I2C_H ) #define I2C_H /**< Include Guard */ /* ---- Include Files ---------------------------------------------------- */ #include #if !defined( CONFIG_H ) # include "Config.h" #endif /** * @addtogroup I2C * @{ */ /* ---- Constants and Types ---------------------------------------------- */ /** * Error Codes */ #define I2C_ERROR_NONE 0 // No Error #define I2C_ERROR_ADDR_NACK -1 // No response to SLA+R/W #define I2C_ERROR_DATA_NACK -2 // NACK during data transmission #define I2C_ERROR_ARBITRATION_LOST -3 // Lost arbitration #define I2C_ERROR_BAD_LEN -4 // Length is wonky #define I2C_ERROR_BAD_CRC -5 // CRC failed #define I2C_ERROR_BUS_ERROR -6 // Someting weird on the i2c bus typedef int8_t I2C_Error_t; /** * Since we're loosely following the SMBus spec, we restrict the amount * of data in each transaction to 32 bytes. */ #define I2C_MAX_DATA_LEN 32 /** * I2C_Addr_t can contain the address of any device on the bus. This * module only supports 7 bit addressing. */ typedef uint8_t I2C_Addr_t; /** * The I2C_CRC macro can be used to remove all CRC support at compile time. */ #if CFG_I2C_USE_CRC # define I2C_CRC(x) x #else # define I2C_CRC(x) #endif /** * I2C_Data_t encapsulates the data being read or written on the i2c bus. * This module follows the SMBus spec, whihch specifies a maximum payload * of 32 bytes. */ typedef struct { #if CFG_I2C_USE_CRC uint8_t m_crc; #endif // For reads, m_len is the number of bytes actually read (doesn't include // the CRC - if present). If a block transfer was performed which has a // length byte, this length will include the length byte. uint8_t m_len; // Note: Under SMBus, a block write can consist of a command, a length, // 32 bytes of payload, and a CRC. // // A read response can consist of a length, 32 bytes of data, and a CRC. uint8_t m_data[ I2C_MAX_DATA_LEN + 2]; // +1 for the command, +1 for length } I2C_Data_t; /* ---- Variable Externs ------------------------------------------------- */ /** * Description of variable. */ /* ---- Function Prototypes ---------------------------------------------- */ /* * Just include prototypes here. Put full descriptions in the .c files. */ /** @} */ #endif /* I2C_H */