--- /tmp/board-omap3beagle.c	2009-07-01 01:06:44.000000000 +0200
+++ git/arch/arm/mach-omap2/board-omap3beagle.c	2009-07-01 01:06:50.000000000 +0200
@@ -125,6 +125,13 @@
 		.wires		= 8,
 		.gpio_wp	= 29,
 	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= 141,
+		.gpio_cd	= 162,
+        .transceiver    = true,
+	},
 	{}	/* Terminator */
 };
 
@@ -132,6 +139,11 @@
 	.supply			= "vmmc",
 };
 
+static struct regulator_consumer_supply beagle_vmmc2_supply = {
+    .supply         = "vmmc",
+};
+
+
 static struct regulator_consumer_supply beagle_vsim_supply = {
 	.supply			= "vmmc_aux",
 };
@@ -148,6 +160,7 @@
 
 	/* link regulators to MMC adapters */
 	beagle_vmmc1_supply.dev = mmc[0].dev;
+	beagle_vmmc2_supply.dev = mmc[1].dev;
 	beagle_vsim_supply.dev = mmc[0].dev;
 
 	/* REVISIT: need ehci-omap hooks for external VBUS
@@ -209,6 +222,21 @@
 	.consumer_supplies	= &beagle_vmmc1_supply,
 };
 
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data beagle_vmmc2 = {
+	.constraints = {
+		.min_uV			= 2700000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vmmc2_supply,
+};
+
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
 static struct regulator_init_data beagle_vsim = {
 	.constraints = {
@@ -284,6 +312,7 @@
 	.gpio		= &beagle_gpio_data,
 	.power		= &beagle_power_data,
 	.vmmc1		= &beagle_vmmc1,
+	.vmmc2		= &beagle_vmmc2,
 	.vsim		= &beagle_vsim,
 	.vdac		= &beagle_vdac,
 	.vpll2		= &beagle_vpll2,