From b42f1800184ddd5202d48ca0a0f166472b4f04ce Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Thu, 11 Feb 2010 21:34:00 +0100 Subject: [PATCH 15/30] ISP: add some more from Leopard imaging patch --- drivers/media/video/isp/isppreview.c | 16 ++++++++- include/media/v4l2-int-device.h | 58 ++++++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/isp/isppreview.c b/drivers/media/video/isp/isppreview.c index 5494efc..85ee25d 100644 --- a/drivers/media/video/isp/isppreview.c +++ b/drivers/media/video/isp/isppreview.c @@ -79,13 +79,26 @@ static struct ispprev_rgbtorgb flr_rgb2rgb = { {0x0000, 0x0000, 0x0000} }; +static struct ispprev_rgbtorgb unity_rgb2rgb = { + { /* RGB-RGB Matrix */ + {0x0100, 0x0000, 0x0000}, + {0x0000, 0x0100, 0x0000}, + {0x0000, 0x0000, 0x0100} + }, /* RGB Offset */ + {0x0000, 0x0000, 0x0000} +}; + /* Default values in Office Flourescent Light for RGB to YUV Conversion*/ static struct ispprev_csc flr_prev_csc[] = { { { /* CSC Coef Matrix */ - {66, 129, 25}, +/* {66, 129, 25}, {-38, -75, 112}, {112, -94 , -18} +*/ + {0x04C, 0x098, 0x01C}, + {0x3D4, 0x3AC, 0x080}, + {0x080, 0x39E, 0x3EC} }, /* CSC Offset */ {0x0, 0x0, 0x0} }, @@ -107,7 +120,6 @@ static struct ispprev_csc flr_prev_csc[] = { } }; - /* Default values in Office Flourescent Light for CFA Gradient*/ #define FLR_CFA_GRADTHRS_HORZ 0x28 #define FLR_CFA_GRADTHRS_VERT 0x28 diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h index ed32d3f..ce415ec 100644 --- a/include/media/v4l2-int-device.h +++ b/include/media/v4l2-int-device.h @@ -113,6 +113,8 @@ enum v4l2_if_type { * on certain image sensors. */ V4L2_IF_TYPE_BT656, + V4L2_IF_TYPE_YCbCr, + V4L2_IF_TYPE_RAW, }; enum v4l2_if_type_bt656_mode { @@ -159,10 +161,66 @@ struct v4l2_if_type_bt656 { u32 clock_curr; }; +struct v4l2_if_type_ycbcr { + /* + * 0: Frame begins when vsync is high. + * 1: Frame begins when vsync changes from low to high. + */ + unsigned frame_start_on_rising_vs:1; + /* Use Bt synchronisation codes for sync correction. */ + unsigned bt_sync_correct:1; + /* Swap every two adjacent image data elements. */ + unsigned swap:1; + /* Inverted latch clock polarity from slave. */ + unsigned latch_clk_inv:1; + /* Hs polarity. 0 is active high, 1 active low. */ + unsigned nobt_hs_inv:1; + /* Vs polarity. 0 is active high, 1 active low. */ + unsigned nobt_vs_inv:1; + /* Minimum accepted bus clock for slave (in Hz). */ + u32 clock_min; + /* Maximum accepted bus clock for slave. */ + u32 clock_max; + /* + * Current wish of the slave. May only change in response to + * ioctls that affect image capture. + */ + u32 clock_curr; +}; + +struct v4l2_if_type_raw { + /* + * 0: Frame begins when vsync is high. + * 1: Frame begins when vsync changes from low to high. + */ + unsigned frame_start_on_rising_vs:1; + /* Use Bt synchronisation codes for sync correction. */ + unsigned bt_sync_correct:1; + /* Swap every two adjacent image data elements. */ + unsigned swap:1; + /* Inverted latch clock polarity from slave. */ + unsigned latch_clk_inv:1; + /* Hs polarity. 0 is active high, 1 active low. */ + unsigned nobt_hs_inv:1; + /* Vs polarity. 0 is active high, 1 active low. */ + unsigned nobt_vs_inv:1; + /* Minimum accepted bus clock for slave (in Hz). */ + u32 clock_min; + /* Maximum accepted bus clock for slave. */ + u32 clock_max; + /* + * Current wish of the slave. May only change in response to + * ioctls that affect image capture. + */ + u32 clock_curr; +}; + struct v4l2_ifparm { enum v4l2_if_type if_type; union { struct v4l2_if_type_bt656 bt656; + struct v4l2_if_type_ycbcr ycbcr; + struct v4l2_if_type_raw raw; } u; }; -- 1.6.6.1