--- mgetty-1.1.30.orig/doc/faxrunqd.8in +++ mgetty-1.1.30/doc/faxrunqd.8in @@ -276,23 +276,25 @@ behaviour, you can send it the following signals: .TP -.B SIGHUP -.TP .B SIGINT .TP .B SIGTERM remove lock file, remove pid file, terminate immediately. .TP +.B SIGHUP +finish all fax jobs that are currently being sent, then terminate (this +is used to signal faxrunqd "I want you to terminate" without disturbing +the normal flow of operation - SIGINT/TERM etc. can lead to some faxes being +sent twice). + +.TP .B SIGUSR1 close, roll, and re-open log file. .TP .B SIGUSR2 -finish all fax jobs that are currently being sent, then terminate (this -is used to signal faxrunqd "I want you to terminate" without disturbing -the normal flow of operation - SIGHUP etc. can lead to some faxes being -sent twice). +dump current modem success/failure statistics to log file. .IX fax .SH BUGS --- mgetty-1.1.30.orig/doc/mgetty.8in +++ mgetty-1.1.30/doc/mgetty.8in @@ -42,10 +42,13 @@ .B -p Use the given string to prompt users for their login names. Various tokens are allowed in this string. These tokens are: @ for the system -name, \\n, \\r, \\g, \\v, \\f, \\t for newline, carriage return, bell, -vertical tab, form feed, and tab, respectively. \\P and \\L will expand to -the tty name ("ttyS0"). \\I will give the "CONNECT foobar" string returned +name, \\n, \\r, \\g, \\b, \\v, \\f, \\t for newline, carriage return, bell, +backspace, vertical tab, form feed, and tab, respectively. +\\P and \\L will expand to the tty name ("ttyS0"). \\Y will give the Caller +ID, \\I the "CONNECT foobar" string returned by the modem, and \\S will output the port speed. +\\s, \\m, \\V, \\R represent the operating system, the hardware name, +the OS version, the OS release. \\N and \\U give the number of users currently logged in. \\C will be changed into the result of ctime(), and \\D and \\T will output the date and time, respectively. Finally, \\ will use digit --- mgetty-1.1.30.orig/doc/mgetty.texi-in +++ mgetty-1.1.30/doc/mgetty.texi-in @@ -1,6 +1,6 @@ \input texinfo @c -*-texinfo-*- @c %**start of header -@c $Id: mgetty.texi-in,v 4.58 2002/11/17 21:19:45 gert Exp $ (c) 1993-2000 Gert Doering and Klaus Weidner +@c $Id: mgetty.texi-in,v 4.59 2003/04/06 14:09:09 gert Exp $ (c) 1993-2000 Gert Doering and Klaus Weidner @setfilename mgetty.info @settitle mgetty + sendfax @c %**end of header @@ -1096,6 +1096,9 @@ @samp{/etc/issue}. Some special characters are substituted by connect speed, date, etc. - see below (login-prompt) for a list. +Note: maximum line length after substitution is 300 characters, so be +careful with ASCII art banners with lots of color settings and such. + @item @code{prompt-waittime} @var{msecs} This specifies how long @code{mgetty} will wait for modem and line to @@ -1117,6 +1120,10 @@ @item \b backspace (ascii 010) @item \f form feed (ascii 013) @item \t TAB +@item \s operating system (OS) +@item \m hardware name +@item \V OS version +@item \R OS release @item \P (and \L) port name (e.g. ttyS0) @item \C date and time, in "ctime()" format @item \I Connection string (e.g. 2400/REL) @@ -1128,7 +1135,7 @@ @item \@var{digit} character with the specified octal code @end itemize -The maximum lenght of the login prompt is limited to 140 characters (after +The maximum lenght of the login prompt is limited to 300 characters (after expansion). @item @code{login-time} @var{secs} @@ -3039,11 +3046,22 @@ implemented since Linux 2.4.10, or in earlier Versions with Jan Oberlaender's patch (http://www.stud.uni-karlsruhe.de/~uslk/i4l-callednumber.tar.gz). +(@strong{NOTE}: This doesn't seem to work for at least Linux 2.4.20 +as shipped by RedHat 8.0 - anyone with some details??!) Alternatively, you can set @code{ATS23.0=1}. This will make i4l signal -the dialed MSN number as @code{RING/12345}. Unfortunately, it will be -recognized by mgetty as caller ID, not destination MSN, so you might need -to do some fiddling with 'ring.c' to get this fixed. +the dialed MSN number as @code{RING/12345}. This was problematic in the +past, as lots of other modems have a similar format to report the Caller ID +(like @code{RING;4321} in ELSA modems) but recent mgetty versions handle +this properly. With this, you can run a single mgetty instance for all +your telephone numbers: just set @code{AT&L*} in your init string - this +tells isnd4linux that @strong{all} incoming calls are to be signalled +to mgetty, not only specific MSN. + +@c init-chat "" ATZ OK AT&L* OK ATS23.0=1S23.2=1S0=0 OK +@c fax-only yes +@c rings 2 +@c modem-quirks 1 For the full list of available AT commands, consult the i4l docs (for example in @file{/usr/src/linux/Documentation/isdn/README}. @@ -3063,8 +3081,9 @@ There's a small catch: modem autodetection will make mgetty think that your ttyI device doesn't support fax (because most cards can't do it). So -you need to set @code{modem-type c2.0} in @file{mgetty.config} and/or -@file{sendfax.config} to force class 2.0 mode. +you need to set @code{modem-type cls} in @file{mgetty.config} and/or +@file{sendfax.config} to force class 2 mode. Class 2.0 mode is not +supported. Voice support with @code{vgetty} should work (use your ttyI device as an answering machine, etc.). I have not tried it yet - talk to the --- mgetty-1.1.30.orig/fax/faxspool.in +++ mgetty-1.1.30/fax/faxspool.in @@ -3,7 +3,7 @@ # faxspool - sample script how to spool fax input data to a spool # directory, creating jobs to be run by faxrunq # -# sccsid: $Id: faxspool.in,v 4.22 2002/11/23 15:14:57 gert Exp $ (c) Gert Doering +# sccsid: $Id: faxspool.in,v 4.25 2003/06/28 20:44:04 gert Exp $ (c) Gert Doering # # syntax: faxspool [flags] # @@ -26,6 +26,15 @@ # 3.10.93: use "hp2hig3" for hp-pcl4-files (cl) # 19.10.93: phone directories (caz) # $Log: faxspool.in,v $ +# Revision 4.25 2003/06/28 20:44:04 gert +# reset umask after creating temp directory +# +# Revision 4.24 2003/04/09 21:05:14 gert +# fix case of "faxing without header" (-h -) - wasn't copying G3 files +# +# Revision 4.23 2003/01/21 13:27:12 gert +# abort if input file names contain whitespace or quote characters +# # Revision 4.22 2002/11/23 15:14:57 gert # revert 4.14 -> 4.15 change: faxqueue_done is now back in $FAX_SPOOL_OUT # (new permission concept, faxrunq/faxrunqd no longer running as root) @@ -577,11 +586,15 @@ fi # -# check, if all the files exist & are readable +# check, if all the file names are "clean", that the files exist & are readable # for file do + if [ `echo "$file" | tr -d ' \011\012\015\047\140"' ` != "$file" ] + then + $echo "$0: invalid characters in file name '$file'!" >&2 ; exit 5 + fi if [ ! -r $file -a x$file != x- ] then $echo "$0: cannot open '$file'!" >&2 ; exit 5 @@ -617,12 +630,14 @@ # spooldir=${TMP:-/tmp}/$new_seq.$$.`date +%S` +oldumask=`umask` umask 077 if mkdir $spooldir ; then $echo "spooling to $spooldir (->$new_seq)..." else $echo "ERROR: can't create work dir '$spooldir', giving up" >&2 ; exit 6 fi +umask $oldumask # # process all input files @@ -847,22 +862,23 @@ fi # -# concatenate header with pages +# concatenate header with pages (optionally) and copy over to spool dir # -if [ -z "$FAX_HEADER" ] +if [ -n "$FAX_HEADER" ] then - finalpg="$pages" # don't :) -else $echo "\nPutting Header lines on top of pages..." hdrfont=$PBMFONT_HEADER_F test -z "$normal_res" || hdrfont=$PBMFONT_HEADER_N +fi - finalpg="" - for f in $pages - do +finalpg="" +for f in $pages +do nr=`expr $nr + 1` + if [ -n "$FAX_HEADER" ] + then cat $FAX_HEADER | sed -e "s;@T@;$phone;g" -e "s;@P@;$nr;g" \ -e "s;@M@;$maxnr;g" -e "s;@U@;$USER;g" \ -e "s;@N@;$FULLNAME;g" \ @@ -873,9 +889,13 @@ | g3cat - $f | \ $FAXQ_HELPER input $new_seq f$nr.g3 \ && rm $f + else + g3cat $f | \ + $FAXQ_HELPER input $new_seq f$nr.g3 \ + && rm $f + fi finalpg="$finalpg f$nr.g3" - done -fi # end "if ! -z $FAX_HEADER" +done if [ -z "$finalpg" -a -z "$poll_req" ] then --- mgetty-1.1.30.orig/fax/faxrunqd.in +++ mgetty-1.1.30/fax/faxrunqd.in @@ -9,10 +9,19 @@ # # initial version: Feb 17, 1997 # -$rcs_id='RCS: $Id: faxrunqd.in,v 1.63 2002/11/23 16:52:18 gert Exp $'; +$rcs_id='RCS: $Id: faxrunqd.in,v 1.65 2003/01/14 14:16:09 gert Exp $'; # # Change Log: +# # $Log: faxrunqd.in,v $ +# Revision 1.65 2003/01/14 14:16:09 gert +# include "total success" counter in the per_phone_statistics +# +# Revision 1.64 2003/01/07 14:48:52 gert +# If a job is re-queued, heavily penalize previously used modem. +# This way, a defective modem (or a modem that has problems connecting to +# just a few destination numbers) has less impact on overall stability. +# # Revision 1.63 2002/11/23 16:52:18 gert # make messages more clear, print warning if running as root # @@ -608,6 +617,7 @@ # - no other job for this phone number already queued # - this modem must be allowed for that job # - if multiple queues allowed, take the shortest one +# - the modem used previously is heavily penalized # # called whenever a job's $queue{$job}->{status} changes to 'active' # @@ -661,6 +671,9 @@ @{$queue{$j}->{ttys}} : @standard_ttys; # find tty with the shortest queue (among those that are allowed) + # + # the previously used modem always gets a queue len of "9998", and is + # thus only used if no other modem is available my $min_l = 9999; my $min_t = $ttys[0]; @@ -674,9 +687,12 @@ $tty_in_use{$t}=0; } - if ( $mq_length{$t}+$mq_badness{$t} < $min_l ) + my $this_q_len = ( $t eq $queue{$j}->{last_modem} ) ? 9998 : + $mq_length{$t}+$mq_badness{$t}; + + if ( $this_q_len < $min_l ) { - $min_l = $mq_length{$t}+$mq_badness{$t}; $min_t = $t; + $min_l = $this_q_len; $min_t = $t; } } @@ -701,7 +717,7 @@ $queue{$j}->{weight} = 1 + scalar( @{$queue{$j}->{pages}} ); $mq_length{$min_t} += $queue{$j}->{weight}; - print LOG "$j: possible ttys: " . join( ':', @ttys ) . " -> queue selected: $min_t (l: $min_l->" . $mq_length{$min_t} . ")\n" if $opt_d; + print LOG "$j: possible ttys: " . join( ':', @ttys ) . " last: ". $queue{$j}->{last_modem} . " -> queue selected: $min_t (l: $min_l->" . $mq_length{$min_t} . ")\n" if $opt_d; # rotate @standard_ttys, to distribute load more evenly among modems push @standard_ttys, (shift @standard_ttys); @@ -804,6 +820,7 @@ } $queue{$job}->{'tries'} = $queue{$job}->{'tries_c'} = 0; + $queue{$job}->{'last_modem'} = 'unknown'; while( ) { @@ -1264,15 +1281,13 @@ $tty_statistics{$t}{total}++; $tty_statistics{$t}{$ex}++; - # and, in case of errors, for per-remote-phone statistics - if ( $ex > 0 ) - { + # and for per-remote-phone statistics my $ph = $queue{$j}->{'phone'}; - if ( ! defined( $per_phone_statistics{$ph} ) || - ! defined( $per_phone_statistics{$ph}{$ex} ) ) + if ( ! defined( $per_phone_statistics{$ph} ) ) + { $per_phone_statistics{$ph}{0} = 0; } + if ( ! defined( $per_phone_statistics{$ph}{$ex} ) ) { $per_phone_statistics{$ph}{$ex} = 0; } $per_phone_statistics{$ph}{$ex}++; - } # now handle return codes. This is tricky if multiple jobs have been # combined into one sendfax call - might have failed in the middle... @@ -1443,6 +1458,9 @@ my $fstr = ( $ex<10 )? "failed" : "FATAL FAILURE"; &wstat( $j, "Status " . localtime() . " $fstr, exit($ex): $verb_ex\n"); + # remember tty used (try to get another one for next call) + $queue{$j}->{last_modem} = $tty; + # write acct.log &wacct($j, "fail $ex: $verb_ex"); @@ -1704,7 +1722,7 @@ foreach $t (keys %tty_statistics) { print LOG "modem statistics for tty '$t'\n"; - print LOG " total faxes sent: ${tty_statistics{$t}{'total'}}\n"; + print LOG " total fax calls : ${tty_statistics{$t}{'total'}}\n"; print LOG " total success : ${tty_statistics{$t}{'0'}}\n"; foreach (sort(keys %{$tty_statistics{$t}})) { @@ -1719,8 +1737,10 @@ foreach $t (sort (keys %per_phone_statistics)) { print LOG "error statistics for remote number '$t'\n"; + print LOG " total success : ${per_phone_statistics{$t}{'0'}}\n"; foreach (sort(keys %{$per_phone_statistics{$t}})) { + next if ( $_ eq '0' ); printf LOG " error code %-2d : %d [%s]\n", $_, $per_phone_statistics{$t}{$_}, $exitcodes[$_]; --- mgetty-1.1.30.orig/fax/faxrm.in +++ mgetty-1.1.30/fax/faxrm.in @@ -7,7 +7,7 @@ # There are still a lot rough edges - but it works, and should give you an # idea how to improve it # -# SCCS: $Id: faxrm.in,v 4.5 2002/11/16 22:16:51 gert Exp $ Copyright (C) 1994 Gert Doering +# SCCS: $Id: faxrm.in,v 4.6 2003/02/04 16:46:36 gert Exp $ Copyright (C) 1994 Gert Doering FAX_SPOOL=@FAX_SPOOL@ FAX_SPOOL_OUT=@FAX_SPOOL_OUT@ @@ -16,7 +16,7 @@ echo="@ECHO@" # # helper program for privileged queue access -FAXQ_HELPER=/usr/local/lib/mgetty+sendfax/faxq-helper +FAXQ_HELPER=@LIBDIR@/faxq-helper # if [ ! -d $FAX_SPOOL_OUT ] --- mgetty-1.1.30.orig/fax/faxq-helper.c +++ mgetty-1.1.30/fax/faxq-helper.c @@ -71,6 +71,8 @@ int fax_out_uid; /* user ID to chown() fax jobs to */ int fax_out_gid; /* group ID ... */ +#define ROOT_UID 0 /* root's user ID - override checks */ + #define FAX_SEQ_FILE ".Sequence" #define FAX_SEQ_LOCK "LCK..seq" @@ -370,7 +372,7 @@ while( *p != '\0' ) { - if ( *p != '.' && *p != ':' && ! isalnum(*p) ) + if ( *p == '/' || *p == '\\' || isspace(*p) || !isprint(*p) ) { eout( "invalid char. '%c' in file name '%s', abort\n", *p, outfilename ); @@ -386,7 +388,7 @@ sprintf( pathbuf, "%s/%s", dir1, outfilename ); - fd = open( pathbuf, O_WRONLY | O_CREAT | O_EXCL, 0600 ); + fd = open( pathbuf, O_WRONLY | O_CREAT | O_EXCL, 0644 ); if ( fd < 0 ) { eout( "can't open '%s' for writing: %s\n", pathbuf, strerror(errno)); @@ -543,6 +545,9 @@ sprintf( buf, "%s/JOB", dir1 ); + /* the JOB file has to be world-readable, relax umask */ + umask( 0022 ); + /* TODO: check if this portably catches symlinks to non-existant files! */ if ( ( fd = open( buf, O_WRONLY | O_CREAT | O_EXCL, 0644 ) ) < 0 ) { @@ -571,7 +576,8 @@ if ( strncmp(buf, "user ", 5) == 0 ) { - if ( strcmp( buf+5, real_user_name ) != 0 ) + if ( real_user_id != ROOT_UID && + strcmp( buf+5, real_user_name ) != 0 ) { eout( "user name mismatch (%s <-> %s)\n", buf+5, real_user_name ); break; @@ -678,7 +684,8 @@ if ( strncmp(buf, "user ", 5) == 0 ) { - if ( strcmp( buf+5, real_user_name ) != 0 ) + if ( real_user_id != ROOT_UID && + strcmp( buf+5, real_user_name ) != 0 ) { fprintf( stderr, "%s: not your job, can't do anything (%s <-> %s)\n", jfile, buf+5, real_user_name ); unlink( lfile ); @@ -803,8 +810,11 @@ /* common things to check and prepare */ - /* directories and JOB files have to be readable */ - umask(0022); + /* make sure people do not play umask tricks on us - the only + * bits that are accepted in a user umask are "044" - permit/prevent + * read access by group/other. Write access is always denied. + */ + umask( ( umask(0) & 0044 ) | 0022 ); /* get numeric uid/gid for fax user */ pw = getpwnam( FAX_OUT_USER ); --- mgetty-1.1.30.orig/TODO +++ mgetty-1.1.30/TODO @@ -352,6 +352,8 @@ 246) fix "RING/" handling for i4l 248) include script to rotate/move log files on a regular basis + (base on contrib/mvlog, move to tools/, run through sedscript for + location and naming for the log files) 250) move prototype for time() to mgetty.h, remove everywhere else @@ -373,3 +375,37 @@ 257) generalize calling $(MAKE) in subdirs - put all $(MAKE) arguments in one common variable + +261) faxrunqd: don't count "modem locked" as "failure" for a given job + (but *do* delay by a certain time) + (hmmm - maybe not. If all modems are locked for a long period of + time, it might be useful to flag the fax as "failed" to get people to + notice. Combine with 259 - should resolve problem) + +262) faxrunqd: smarter algorithm for "modem is broken" + (locked = doesn't count, can't init = +1, NO CARRIER = +0.2) + +263) faxspool.rules: add sample mappings for PDF (via acroread, xpdf, + recent ghostscript versions) + +264) faxrunqd: timeout on "hanging" sendfax processes + (timeout > 15 min + 5 minutes * number of pages, or something like that) + +265) faxrunqd: write tty to acct.log (format change / WEB gui) + +260) faxrunqd: bump up priority of "exit 12" jobs +266) faxunrqd: if a job fails half-way through (12), increase priority + to re-send missing parts quickly + +267) faxrunqd: sort per-modem statistics numerically (watchout: "total") + +268) faxrunq+faxrunqd: have configurable counters for + "send-a-warning after tries, fail after " + have separate counter for "modem-locked" + costing-failures tries-except-modem-locked total-tries + warning - 10 10 + failure 5 30 100 + +269) faxrunqd: have configurable threshold for "everything is broken" + -> if that threshold is reached, generate STOP file, warning e-mail, + and suspend itself (like "the local in-house PABX is broken") --- mgetty-1.1.30.orig/Makefile +++ mgetty-1.1.30/Makefile @@ -1,6 +1,6 @@ # Makefile for the mgetty fax package # -# SCCS-ID: $Id: Makefile,v 4.56 2002/12/16 13:08:23 gert Exp $ (c) Gert Doering +# SCCS-ID: $Id: Makefile,v 4.58 2003/06/12 07:52:51 gert Exp $ (c) Gert Doering # # this is the C compiler to use (on SunOS, the standard "cc" does not # grok my code, so please use gcc there. On ISC 4.0, use "icc".). @@ -213,6 +213,7 @@ FAX_SPOOL_OUT=$(FAX_SPOOL)/outgoing # # the user that owns the "outgoing fax queue" (FAX_SPOOL_OUT) +# this user must exist in the system, otherwise faxspool will not work! # # faxrunq and faxrunqd should run under this user ID, and nothing else. # This user needs access to the modems of course. @@ -300,8 +301,8 @@ # Nothing to change below this line ---------------------------------! # MR=1.1 -SR=30 -DIFFR=1.1.29 +SR=31 +DIFFR=1.1.30 # # OBJS=mgetty.o logfile.o do_chat.o locks.o utmp.o logname.o login.o \ @@ -511,7 +512,7 @@ ssh home.leo.org -l doering 'cd $$HOME ; ./beta' # send to Marc and Knarf - head -30 ChangeLog |mail -s "mgetty$(MR).$(SR).tar.gz on greenie/alpha" knarf@camelot.de marc marcs + head -30 ChangeLog |mail -s "mgetty$(MR).$(SR).tar.gz on greenie/alpha" mgetty@knarf.de marc marcs # -./ftp.sh $(MR).$(SR) ftp.camelot.de /pub/incoming # -./ftp.sh $(MR).$(SR) poseidon.thphy.uni-duesseldorf.de /incoming @@ -600,9 +601,9 @@ # data files + directories # test -d $(LIBDIR) || \ - ( ./mkidirs $(LIBDIR) ; chmod 755 $(LIBDIR) ) + ( ./mkidirs $(LIBDIR) && chmod 755 $(LIBDIR) ) test -d $(CONFDIR) || \ - ( ./mkidirs $(CONFDIR); chmod 755 $(CONFDIR)) + ( ./mkidirs $(CONFDIR) && chmod 755 $(CONFDIR)) test -f $(CONFDIR)/login.config || \ $(INSTALL) -o root -m 600 login.config $(CONFDIR)/ test -f $(CONFDIR)/mgetty.config || \ @@ -627,17 +628,17 @@ # fax spool directories # test -d $(spool) || \ - ( mkdir $(spool) ; chmod 755 $(spool) ) + ( mkdir $(spool) && chmod 755 $(spool) ) test -d $(FAX_SPOOL) || \ - ( mkdir $(FAX_SPOOL) ; \ - chown $(FAX_OUT_USER) $(FAX_SPOOL) ; \ + ( mkdir $(FAX_SPOOL) && \ + chown $(FAX_OUT_USER) $(FAX_SPOOL) && \ chmod 755 $(FAX_SPOOL) ) test -d $(FAX_SPOOL_IN) || \ - ( mkdir $(FAX_SPOOL_IN) ; chmod 755 $(FAX_SPOOL_IN) ) + ( mkdir $(FAX_SPOOL_IN) && chmod 755 $(FAX_SPOOL_IN) ) test -d $(FAX_SPOOL_OUT) || \ - ( mkdir $(FAX_SPOOL_OUT) ; \ - chown $(FAX_OUT_USER) $(FAX_SPOOL_OUT) ; \ - chmod 755 $(FAX_SPOOL_OUT) ) + mkdir $(FAX_SPOOL_OUT) + chown $(FAX_OUT_USER) $(FAX_SPOOL_OUT) + chmod 755 $(FAX_SPOOL_OUT) # # g3 tool programs # --- mgetty-1.1.30.orig/voice/libutil/access.c +++ mgetty-1.1.30/voice/libutil/access.c @@ -5,7 +5,7 @@ * exactly one unnested call to voice_desimpersonify() for each * voice_impersonify() because of the static umask below. * - * $Id: access.c,v 1.2 1999/07/04 07:15:52 marcs Exp $ + * $Id: access.c,v 1.3 2003/04/23 08:49:16 gert Exp $ * */ @@ -32,14 +32,14 @@ &gid); if (setegid(gid)) { - lprintf(L_WARN, "%s: cannot set effective GID to %d", - program_name, gid); + lprintf(L_WARN, "%s: cannot set effective GID to %d: %s", + program_name, gid, strerror(errno)); return 0; } if (seteuid(uid)) { - lprintf(L_WARN, "%s: cannot set effective UID to %d", - program_name, uid); + lprintf(L_WARN, "%s: cannot set effective UID to %d: %s", + program_name, uid, strerror(errno)); return 0; } @@ -52,14 +52,14 @@ int voice_desimpersonify(void) { if (seteuid(getuid())) { - lprintf(L_WARN, "%s: cannot switch back to effective UID %d", - program_name, getuid()); + lprintf(L_WARN, "%s: cannot switch back to effective UID %d: %s", + program_name, getuid(), strerror(errno)); return 0; } if (setegid(getgid())) { - lprintf(L_WARN, "%s: cannot switch back to effective GID %d", - program_name, getgid()); + lprintf(L_WARN, "%s: cannot switch back to effective GID %d: %s", + program_name, getgid(), strerror(errno)); return 0; } --- mgetty-1.1.30.orig/voice/libvoice/V253modem.c +++ mgetty-1.1.30/voice/libvoice/V253modem.c @@ -16,7 +16,7 @@ Hint: Recorded voice files are in .ub format (refer to the sox manpage about this) except the header. So you can use this files with sox. * - * $Id: V253modem.c,v 1.6 2002/11/25 21:14:51 gert Exp $ + * $Id: V253modem.c,v 1.7 2003/01/08 22:03:18 gert Exp $ * */ @@ -352,7 +352,7 @@ /* Only verifies the RMD name */ #define V253modem_RMD_NAME "V253modem" -#define ELSA_RMD_NAME "ELSA" +#define ELSA_RMD_NAME "Elsa" int V253_check_rmd_adequation(char *rmd_name) { return !strncmp(rmd_name, --- mgetty-1.1.30.orig/faxrecp.c +++ mgetty-1.1.30/faxrecp.c @@ -94,13 +94,13 @@ #ifdef SHORT_FILENAMES sprintf(temp, "%s/f%c%07x%s.%02d", directory, - fax_par_d.vr == 0? 'n': 'f', + (fax_par_d.vr == 0 || fax_par_d.vr == 8) ? 'n': 'f', (int) call_start & 0xfffffff, DevId, pagenum ); #else /* include sender's fax id - if present - into filename */ sprintf(temp, "%s/f%c%07x%s-", directory, - fax_par_d.vr == 0? 'n': 'f', + (fax_par_d.vr == 0 || fax_par_d.vr == 8) ? 'n': 'f', (int) call_start & 0xfffffff, DevId ); i = strlen(temp); --- mgetty-1.1.30.orig/logfile.c +++ mgetty-1.1.30/logfile.c @@ -3,13 +3,6 @@ #include #include #include -#ifdef USE_VARARGS -# if !defined(NeXT) || defined(NEXTSGTTY) -# include -# endif -#else -# include -#endif #include #include #include @@ -19,6 +12,15 @@ #include "mgetty.h" #include "policy.h" +/* this must be included after ugly.h (sets USE_VARARGS on non-ANSI cc's) */ +#ifdef USE_VARARGS +# if !defined(NeXT) || defined(NEXTSGTTY) +# include +# endif +#else +# include +#endif + #ifdef SYSLOG #include --- mgetty-1.1.30.orig/faxlib.c +++ mgetty-1.1.30/faxlib.c @@ -178,8 +178,10 @@ if ( line[ix+1] == ',' && /* +FPS:s,lc,blc */ sscanf( &line[ix+2], - (modem_type==Mt_class2_0)?"%x,%x,%x,%x" - :"%d,%d,%d,%d", + ( modem_type == Mt_class2 || + (modem_quirks & MQ_FPS_NOT_HEX) ) + ?"%d,%d,%d,%d" + :"%x,%x,%x,%x", &fhs_lc, &fhs_blc, &fhs_cblc, &fhs_lbc ) >= 2 ) { lprintf( L_NOISE, "%d lines received, %d lines bad, %d bytes lost", fhs_lc, fhs_blc, fhs_lbc ); @@ -636,7 +638,7 @@ case 1445: lprintf( L_MESG, "USR Courier/Sportster v32bis detected (buggy fax implementation)" ); modem_type=Mt_class2_0; - modem_quirks |= MQ_USR_FMINSP; + modem_quirks |= MQ_USR_FMINSP | MQ_FPS_NOT_HEX; break; case 2886: case 3361: @@ -645,17 +647,20 @@ case 3367: lprintf( L_MESG, "USR Courier/Sportster V.34(+) detected" ); modem_type=Mt_class2_0; + modem_quirks |= MQ_FPS_NOT_HEX; mis = mdm_get_idstring( "ATI3", 1, fd ); break; case 5601: case 5607: lprintf( L_MESG, "USR Courier/Sportster 56k detected" ); modem_type=Mt_class2_0; + modem_quirks |= MQ_FPS_NOT_HEX; mis = mdm_get_idstring( "ATI3", 1, fd ); break; case 6401: lprintf( L_MESG, "USR I-Modem detected" ); modem_type=Mt_class2_0; + modem_quirks |= MQ_FPS_NOT_HEX; mis = mdm_get_idstring( "ATI3", 1, fd ); break; case 62: /* sure? */ @@ -813,6 +818,7 @@ { lprintf( L_MESG, "USR Courier/Sportster V90 (national variant?) detected" ); modem_type=Mt_class2_0; + modem_quirks |= MQ_FPS_NOT_HEX; mis = mdm_get_idstring( "ATI3", 1, fd ); } /* grrr, another one of those - Bill Nugent */ @@ -835,6 +841,12 @@ modem_type=Mt_class2; modem_quirks |= MQ_NEED2; } + else if ( strncmp( l, "LT V.92", 7 ) == 0 ) /* gert */ + { + lprintf( L_MESG, "Multitech MT5634ZBA-V92 detected" ); + modem_type=Mt_class2_0; + modem_quirks |= MQ_FPS_NOT_HEX; + } } if ( mis != NULL ) --- mgetty-1.1.30.orig/faxrec.c +++ mgetty-1.1.30/faxrec.c @@ -208,7 +208,7 @@ fprintf( pipe_fp, "\nModem device: %s\n", Device ); fprintf( pipe_fp, "\nCommunication parameters: %s\n", fax_param ); fprintf( pipe_fp, " Resolution : %s\n", - fax_par_d.vr == 0? "normal" :"fine"); + (fax_par_d.vr == 0 || fax_par_d.vr == 8) ? "normal" :"fine"); fprintf( pipe_fp, " Bit Rate : %d\n", ( fax_par_d.br+1 ) * 2400 ); fprintf( pipe_fp, " Page Width : %d pixels\n", fax_par_d.wd == 0? 1728: ( fax_par_d.wd == 1 ? 2048: 2432 ) ); --- mgetty-1.1.30.orig/logname.c +++ mgetty-1.1.30/logname.c @@ -51,7 +51,7 @@ char * ln_escape_prompt _P1( (ep), char * ep ) { -#define MAX_PROMPT_LENGTH 140 +#define MAX_PROMPT_LENGTH 300 static char * p = NULL; int i; static struct utsname un; @@ -191,7 +191,7 @@ if ( *ep != 0 ) { - lprintf( L_WARN, "buffer overrun - input prompt too long" ); + lprintf( L_WARN, "ln_escape_prompt: input line too long - data truncated" ); } return p; --- mgetty-1.1.30.orig/README.1st +++ mgetty-1.1.30/README.1st @@ -72,7 +72,7 @@ Generic questions ("it doesn't work") should go to the mgetty mailing list (mgetty@muc.de), because I just don't have time to explain it all again -and again. +and again. (Un-)Subscription is done via mgetty-request@muc.de. And... please do not forget that I'm doing this kind of support entirely in my spare time - sometimes my answers will be very short, or it may --- mgetty-1.1.30.orig/ugly.h +++ mgetty-1.1.30/ugly.h @@ -38,5 +38,10 @@ #define const #define volatile +/* and function(fmt,...) is incompatible with K&R protoypes */ +#ifndef USE_VARARGS +# define USE_VARARGS +#endif + #endif --- mgetty-1.1.30.orig/ChangeLog +++ mgetty-1.1.30/ChangeLog @@ -1,3 +1,79 @@ +Wed Aug 20 12:39:53 MEST 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxrunqd.in: change signal handling - use HUP for graceful + exit, and dump statistics to logfile upon receipt of USR2 + +Sat Jun 28 22:14:35 MEST 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxq-helper.c: honour user umask when spooling G3 files + (user decides whether group/other can read faxes) + + * fax/faxspoool.in: reset umask after creating tmpdir (with umask 077) + + * fax/faxq-helper.c: file name validation was overly strict - + accept anything that's printable, not a space, '/' or '\' + +Thu Jun 12 16:56:44 MEST 2003 Gert Doering (gert@greenie.muc.de) + + * faxlib.c: Multitech and USR return class 2.0/2.1 +FPS:, + values in decimal, not hex -> change +FPS: parser to do decimal + for those modems (via modem_quirks |= MQ_FPS_NOT_HEX) + + * fax_lib.h: add MQ_FPS_NOT_HEX modem quirk bit + + * faxrec.c, faxrecp.c: understand VR=8 for "normal mode" (200x100 dpi) + +Mon Apr 28 19:41:14 MEST 2003 Gert Doering (gert@greenie.muc.de) + + * logname: make "buffer overrun" error message more precise + +Wed Apr 23 10:49:25 MEST 2003 John R. Jackson + + * voice/libutil/access.c: more verbose error reporting + +Wed Apr 9 23:05:23 MEST 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxspool.in: fix spooling without header line (-h -) + +Sun Apr 6 16:09:14 MEST 2003 Andreas Barth + + * mgetty.8in, mgetty.texi-in: document escape sequences for + /etc/issue and login prompt. + +Wed Mar 5 21:37:38 MET 2003 Gert Doering (gert@greenie.muc.de) + + * Makefile: abort "make install" before installing faxspool + if fax user does not exist + + * Makefile: unconditionally chown $FAX_SPOOL_OUT to fax user + +Tue Feb 4 17:46:45 MET 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxq-helper.c: uid=0 overrides access permission checks + + * fax/faxrm.in: bugfix: get faxq-helper path from sedscript + +Tue Jan 21 14:27:39 MET 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxspool.in: abort with a proper error message on input file + names containing white space or quote characters + +Tue Jan 14 14:30:42 MET 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxrunqd.in: include "success" counter in per_phone_statistics + + * ugly.h: #define USE_VARARGS for non-Ansi C compilers + + * logfile.c: change #include<> sequence to catch USE_VARARGS def. + +Wed Jan 8 23:03:26 MET 2003 Gert Doering (gert@greenie.muc.de) + + * fax/faxrunqd.in: if a fax job fails, reschedule on different + modem (if possible) + + * voice/libvoice/V253modem.c: fix ELSA_RMD_NAME (used for + V.253 modem <-> other modem RMD equivalency checks) + Mon Dec 16 14:08:06 MET 2002 Gert Doering (gert@greenie.muc.de) * release 1.1.30 --- mgetty-1.1.30.orig/version.h +++ mgetty-1.1.30/version.h @@ -1 +1 @@ -char * mgetty_version = "experimental test release 1.1.30-Dec16"; +char * mgetty_version = "experimental test release 1.1.31-Sep23"; --- mgetty-1.1.30.orig/fax_lib.h +++ mgetty-1.1.30/fax_lib.h @@ -102,3 +102,6 @@ #define MQ_NO_XON 0x08 /* do not wait for XON char when sending */ #define MQ_USR_FMINSP 0x20 /* USR: +FCC=1, sets MIN speed instead */ #define MQ_SHOW_NSF 0x40 /* set AT+FNR=1,1,1,1 (with NSFs) */ +#define MQ_FPS_NOT_HEX 0x80 /* +FPS:, reported as decimal */ + +/* note: 0x100 and 0x200 currently used for teergrubing - faxrecp.c */