path: root/recipes/linux/linux-2.6.27/boc01/012-090219-capsense.patch

Index: linux-2.6.27/drivers/input/misc/Kconfig
===================================================================
--- linux-2.6.27.orig/drivers/input/misc/Kconfig
+++ linux-2.6.27/drivers/input/misc/Kconfig
@@ -207,4 +207,13 @@ config HP_SDC_RTC
 	  Say Y here if you want to support the built-in real time clock
 	  of the HP SDC controller.
 
+config INPUT_CAPSENSE_BTNS
+	tristate "CAPSENSE CY8C201xx buttons interface"
+	select INPUT_POLLDEV
+	select LEDS_CLASS
+	help
+	  To compile this driver as a module, choose M here:
+	  the module will be called capsense-btns.
+	  To change poll interval, invoque poll parameter in msecs.
+
 endif
Index: linux-2.6.27/drivers/input/misc/Makefile
===================================================================
--- linux-2.6.27.orig/drivers/input/misc/Makefile
+++ linux-2.6.27/drivers/input/misc/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
+obj-$(CONFIG_INPUT_CAPSENSE_BTNS)	+= capsense-btns.o
Index: linux-2.6.27/drivers/input/misc/capsense-btns.c
===================================================================
--- /dev/null
+++ linux-2.6.27/drivers/input/misc/capsense-btns.c
@@ -0,0 +1,438 @@
+/*
+ * CAPSENSE Interface driver
+ *
+ *
+ * Copyright (C) 2008, CenoSYS (www.cenosys.com).
+ *
+ * Guillaume Ligneul <guillaume.ligneul@gmail.com>
+ * Jeremy Lainé <jeremy.laine@bolloretelecom.eu>
+ * Sylvain Giroudon <sylvain.giroudon@goobie.fr>
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+
+
+static int capsense_attach_adapter(struct i2c_adapter *adapter);
+static int capsense_detach_client(struct i2c_client *client);
+#ifdef CONFIG_PM
+static int capsense_suspend(struct i2c_client *client, pm_message_t mesg);
+static int capsense_resume(struct i2c_client *client);
+#endif
+
+#define DRIVER_NAME "capsense"
+
+/* i2c configuration */
+#define CAPSENSE_I2C_ADDR 0x25
+// To debug (may be add in include/linux/i2c-id.h)
+#define I2C_DRIVERID_CAPSENSE   98
+
+#define BUTTONS_POLL_INTERVAL	30	/* msec */
+
+#define CAP_OUTPUT_PORT(port)   (0x04+(port))
+#define CAP_OP_SEL(port,bit)    (0x1C+(25*(port))+(5*(bit)))
+#define CAP_READ_STATUS(port)   (0x88+(port))
+
+#define CAP_CS(command,port,bit)     ((command)+(5*(port))+(bit))
+#define CAP_CS_FINGER_TH(port,bit)   CAP_CS(0x61,port,bit)
+#define CAP_CS_IDAC(port,bit)        CAP_CS(0x6B,port,bit)
+
+#define CAP_DEVICE_ID           0x7A
+#define CAP_DEVICE_STATUS       0x7B
+#define CAP_I2C_ADDR_DM         0x7C
+
+#define CAP_COMMAND_REG         0xA0
+#define CAP_COMMAND_STORE_NVM        0x01
+#define CAP_COMMAND_RESTORE_FACTORY  0x02
+#define CAP_COMMAND_RECONFIGURE      0x06
+#define CAP_COMMAND_NORMAL_MODE      0x07
+#define CAP_COMMAND_SETUP_MODE       0x08
+
+#define CAP_NLEDS               5
+
+static int poll_interval = BUTTONS_POLL_INTERVAL;
+module_param_named(poll, poll_interval, uint, 0);
+MODULE_PARM_DESC(poll, "poll interval in msec (30=default)");
+
+static const unsigned short normal_i2c[] = {
+	CAPSENSE_I2C_ADDR , I2C_CLIENT_END
+};
+I2C_CLIENT_INSMOD;
+
+static struct i2c_driver capsense_driver = {
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+	.id		= I2C_DRIVERID_CAPSENSE,
+	.attach_adapter = &capsense_attach_adapter,
+	.detach_client	= &capsense_detach_client,
+#ifdef CONFIG_PM
+	.suspend        = &capsense_suspend,
+	.resume         = &capsense_resume,
+#endif
+};
+
+struct capsense_led {
+	struct led_classdev cdev;
+	struct capsense_ctx *capsense;
+	int port;
+	int bit;
+};
+
+struct capsense_ctx {
+	struct input_polled_dev *ipdev;
+	struct i2c_client client;
+	unsigned char key_state;
+	struct capsense_led leds[CAP_NLEDS];
+	unsigned char led_state[2];
+	struct mutex mutex;
+};
+
+static unsigned short input_keymap[] = {
+	// GP0
+	KEY_F1,
+	KEY_ENTER,
+	KEY_DOWN,
+	KEY_BACKSPACE,
+	// GP1
+	KEY_UP,
+};
+
+struct capsense_keymap {
+	char *name;
+	int port, bit;
+};
+
+static struct capsense_keymap phys_keymap[] = {
+	{ "info", 0, 4 },
+	{ "ok",   0, 2 },
+	{ "down", 0, 3 },
+	{ "back", 0, 0 },
+	{ "up",   1, 4 },
+};
+
+
+struct capsense_ledmap {
+	char *name;
+	int port, bit;
+};
+
+static struct capsense_ledmap ledmap[CAP_NLEDS] = {
+	{ "capsense:blue:back", 0, 1 },
+	{ "capsense:blue:info", 1, 0 },
+	{ "capsense:blue:down", 1, 1 },
+	{ "capsense:blue:ok",   1, 2 },
+	{ "capsense:blue:up",   1, 3 },
+};
+
+
+/*
+ * Buttons events handling
+ */
+
+static void handle_buttons(struct input_polled_dev *dev)
+{
+	struct capsense_ctx *capsense = dev->private;
+	u8 port_value;
+	u8 new_state = 0;
+	int port;
+	u8 changed;
+	int i;
+
+	mutex_lock(&capsense->mutex);
+
+	// read status
+	port = -1;
+	port_value = 0;
+	for (i = 0; i < ARRAY_SIZE(phys_keymap); i++) {
+		if ( phys_keymap[i].port != port ) {
+			port = phys_keymap[i].port;
+			port_value = i2c_smbus_read_byte_data(&capsense->client, CAP_READ_STATUS(port));
+		}
+
+		if ( port_value & (1 << phys_keymap[i].bit) )
+			new_state |= (1 << i);
+	}
+
+	mutex_unlock(&capsense->mutex);
+
+	// update keyboard state
+	changed = capsense->key_state ^ new_state;
+	for (i = 0; i < ARRAY_SIZE(input_keymap); i++)
+		if (changed & (1 << i))
+			input_report_key(dev->input, input_keymap[i], (new_state & (1 << i)));
+	capsense->key_state = new_state;
+	input_sync(dev->input);
+}
+
+
+/*
+ * LEDs management
+ */
+
+static void
+capsense_led_set(struct led_classdev *led_cdev,
+		 enum led_brightness value)
+{
+	struct capsense_led *led = (struct capsense_led *) led_cdev;
+	struct capsense_ctx *capsense = led->capsense;
+	int port = led->port;
+	unsigned char mask = (1 << led->bit);
+
+	if ( value )
+		capsense->led_state[port] |= mask;
+	else
+		capsense->led_state[port] &= ~mask;
+
+	mutex_lock(&capsense->mutex);
+	i2c_smbus_write_byte_data(&capsense->client, CAP_OUTPUT_PORT(port), capsense->led_state[port]);
+	mutex_unlock(&capsense->mutex);
+}
+
+static void
+capsense_led_enable(struct capsense_led *led, int state)
+{
+	struct capsense_ctx *capsense = led->capsense;
+
+	mutex_lock(&capsense->mutex);
+	i2c_smbus_write_byte_data(&capsense->client, CAP_OP_SEL(led->port, led->bit), state ? 0x00 : 0x80);
+	mutex_unlock(&capsense->mutex);
+}
+
+static int
+capsense_led_init(struct capsense_ctx *capsense)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < CAP_NLEDS; i++) {
+		struct capsense_led *led = &(capsense->leds[i]);
+
+		led->cdev.name = ledmap[i].name;
+		led->cdev.brightness_set = capsense_led_set;
+		led->capsense = capsense;
+		led->port = ledmap[i].port;
+		led->bit = ledmap[i].bit;
+
+		ret = led_classdev_register(&capsense->ipdev->input->dev, &led->cdev);
+		if ( ret < 0 )
+			return -1;
+
+		capsense_led_enable(led, 1);
+	}
+
+	/* Switch all leds off */
+	mutex_lock(&capsense->mutex);
+
+	capsense->led_state[0] = 0x00;
+	i2c_smbus_write_byte_data(&capsense->client, CAP_OUTPUT_PORT(0), 0x00);
+
+	capsense->led_state[1] = 0x00;
+	i2c_smbus_write_byte_data(&capsense->client, CAP_OUTPUT_PORT(1), 0x00);
+
+	mutex_unlock(&capsense->mutex);
+
+	return 0;
+}
+
+
+static void
+capsense_led_exit(struct capsense_ctx *capsense)
+{
+	int i;
+
+	for (i = 0; i < CAP_NLEDS; i++) {
+		led_classdev_unregister(&capsense->leds[i].cdev);
+	}
+}
+
+
+static inline void
+capsense_led_suspend(struct capsense_ctx *capsense)
+{
+	int i;
+
+	for (i = 0; i < CAP_NLEDS; i++) {
+		struct capsense_led *led = &(capsense->leds[i]);
+
+		led_classdev_suspend(&led->cdev);
+		capsense_led_enable(led, 0);
+	}
+}
+
+
+static inline void
+capsense_led_resume(struct capsense_ctx *capsense)
+{
+	int i;
+
+	for (i = 0; i < CAP_NLEDS; i++) {
+		struct capsense_led *led = &(capsense->leds[i]);
+
+		capsense_led_enable(led, 1);
+		led_classdev_resume(&led->cdev);
+	}
+}
+
+
+/*
+ * Device configuration through procfs entries
+ */
+
+#ifdef CONFIG_PROC_FS
+#include "capsense-procfs.c"
+#endif
+
+
+/*
+ * Device initialisation
+ */
+
+static int
+capsense_probe(struct i2c_adapter *adapter, int addr, int kind)
+{
+	struct capsense_ctx *capsense;
+	struct input_polled_dev *ipdev;
+	struct input_dev *input;
+	int rc = 0, err = -ENOMEM, i=0;
+
+	capsense = kzalloc(sizeof(*capsense), GFP_KERNEL);
+		if (!capsense)
+			goto failout;
+
+	mutex_init(&capsense->mutex);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+		goto failout;
+	}
+
+	ipdev = input_allocate_polled_device();
+		if (!ipdev)
+			goto failout;
+
+	capsense->key_state = 0;
+	capsense->ipdev = ipdev;
+	capsense->client.adapter = adapter;
+	capsense->client.addr = addr;
+	capsense->client.driver = &capsense_driver;
+	strlcpy(capsense->client.name, DRIVER_NAME, I2C_NAME_SIZE);
+	i2c_set_clientdata(&capsense->client, capsense);
+
+	rc = i2c_attach_client(&capsense->client);
+	if (rc)
+		goto out_attach;
+
+	ipdev->poll = handle_buttons;
+	ipdev->private = capsense;
+	ipdev->poll_interval = poll_interval;
+
+	input = ipdev->input;
+	input->name = "Capsense buttons";
+	input->phys = "capsense/input0";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &capsense->client.dev;
+
+	input->keycode = input_keymap;
+	input->keycodemax = ARRAY_SIZE(input_keymap);
+	input->keycodesize = sizeof(unsigned short);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	set_bit(EV_KEY, ipdev->input->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(input_keymap); i++)
+		set_bit(input_keymap[i], ipdev->input->keybit);
+
+	rc = input_register_polled_device(ipdev);
+	if(rc)
+		goto out_polled;
+
+	if ( capsense_led_init(capsense) )
+		goto out_registered;
+
+#ifdef CONFIG_PROC_FS
+	/* Create /proc entries for hardware device configuration */
+	capsense_proc_init(capsense);
+#endif
+
+	return 0;
+
+out_registered:
+	input_unregister_polled_device(ipdev);
+out_polled:
+	i2c_detach_client(&capsense->client);
+out_attach:
+	input_free_polled_device(ipdev);
+failout:
+	return err;
+}
+
+static int
+capsense_attach_adapter (struct i2c_adapter *adapter)
+{
+	return i2c_probe(adapter, &addr_data, capsense_probe);
+}
+
+static int
+capsense_detach_client(struct i2c_client *client)
+{
+	struct capsense_ctx *capsense = i2c_get_clientdata(client);
+
+	capsense_led_exit(capsense);
+	input_unregister_polled_device(capsense->ipdev);
+	i2c_detach_client(&capsense->client);
+	input_free_polled_device(capsense->ipdev);
+	return 0;
+}
+
+
+/*
+ * Power management
+ */
+
+#ifdef CONFIG_PM
+static int capsense_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct capsense_ctx *capsense = i2c_get_clientdata(client);
+
+	capsense_led_suspend(capsense);
+
+	return 0;
+}
+
+static int capsense_resume(struct i2c_client *client)
+{
+	struct capsense_ctx *capsense = i2c_get_clientdata(client);
+
+	capsense_led_resume(capsense);
+
+	return 0;
+}
+#endif
+
+
+/*
+ * Driver initialisation
+ */
+
+static int __init capsense_buttons_init(void)
+{
+	return i2c_add_driver(&capsense_driver);
+}
+
+static void __exit capsense_buttons_exit(void)
+{
+	i2c_del_driver(&capsense_driver);
+}
+
+MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@cenosys.com>");
+MODULE_DESCRIPTION("Capsense CY8C201xx Input driver");
+MODULE_LICENSE("GPL");
+module_init(capsense_buttons_init);
+module_exit(capsense_buttons_exit);
Index: linux-2.6.27/drivers/input/misc/capsense-procfs.c
===================================================================
--- /dev/null
+++ linux-2.6.27/drivers/input/misc/capsense-procfs.c
@@ -0,0 +1,390 @@
+/*
+ * CAPSENSE Interface driver
+ * Device setup using procfs
+ *
+ * Copyright (C) 2008, Goobie (www.goobie.fr).
+ *
+ * Sylvain Giroudon <sylvain.giroudon@goobie.fr>
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ */
+
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+
+struct capsense_proc_data {
+	struct capsense_ctx *capsense;
+	struct capsense_keymap *phys;
+	char *name;
+	unsigned char command;
+	unsigned char hex;
+};
+
+struct capsense_proc_entry {
+	char *name;
+	unsigned char command;
+	struct capsense_proc_data data[ARRAY_SIZE(phys_keymap)];
+};
+
+static struct capsense_proc_entry capsense_proc_key_entries[] = {
+	{ "CS_FINGER_TH", CAP_CS_FINGER_TH(0,0) },
+	{ "CS_IDAC",      CAP_CS_IDAC(0,0)      },
+};
+
+static struct capsense_proc_entry capsense_proc_device_entries[] = {
+	{ "DEVICE_ID",     CAP_DEVICE_ID        },
+	{ "DEVICE_STATUS", CAP_DEVICE_STATUS    },
+};
+
+struct capsense_proc_command {
+	char *name;
+	unsigned char command;
+	struct capsense_ctx *capsense;
+};
+
+static struct capsense_proc_command capsense_proc_commands[] = {
+	{ "store",       CAP_COMMAND_STORE_NVM       },
+	//{ "factory",     CAP_COMMAND_RESTORE_FACTORY },
+	//{ "reconfigure", CAP_COMMAND_RECONFIGURE     },
+};
+
+
+static int capsense_proc_read(char *page, char **start, off_t off, int count,
+			      int *eof, void *_data)
+{
+	struct capsense_proc_data *data = _data;
+	struct capsense_ctx *capsense = data->capsense;
+	u8 value;
+	int len;
+
+	mutex_lock(&capsense->mutex);
+	value = i2c_smbus_read_byte_data(&capsense->client, data->command);
+	mutex_unlock(&capsense->mutex);
+
+	if ( data->hex )
+		len = sprintf(page, "%02X\n", value);
+	else
+		len = sprintf(page, "%u\n", value);
+
+	len -= off;
+	if ( len < count ) {
+		*eof = 1;
+		if ( len <= 0 )
+			return 0;
+	} else {
+		len = count;
+	}
+
+	*start = page + off;
+
+	return len;
+}
+
+
+static int capsense_proc_write(struct file *file, const char *buf,
+			       unsigned long count, void *_data)
+{
+	struct capsense_proc_data *data = _data;
+	struct capsense_ctx *capsense = data->capsense;
+	char lbuf[count+1];
+	u8 value;
+
+	/* Only root can do this */
+	if ( !capable(CAP_SYS_ADMIN) )
+		return -EACCES;
+
+	memset(lbuf, 0, sizeof(lbuf));
+
+	if (copy_from_user(lbuf, buf, count))
+		return -EFAULT;
+
+	if ( sscanf(lbuf, "%hhi", &value) == 1 ) {
+		mutex_lock(&capsense->mutex);
+		i2c_smbus_write_byte_data(&capsense->client, CAP_COMMAND_REG, CAP_COMMAND_SETUP_MODE);
+		i2c_smbus_write_byte_data(&capsense->client, data->command, value);
+		i2c_smbus_write_byte_data(&capsense->client, CAP_COMMAND_REG, CAP_COMMAND_NORMAL_MODE);
+		mutex_unlock(&capsense->mutex);
+	}
+	else {
+		printk(KERN_INFO DRIVER_NAME ": [%s/%s] Syntax error in expression\n", data->phys->name, data->name);
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+
+static inline char *str_skip_blanks(char *s)
+{
+	while ( (*s != '\0') && (*s <= ' ') )
+		s++;
+	return s;
+}
+
+
+static inline char *str_skip_chars(char *s)
+{
+	while ( *s > ' ' )
+		s++;
+	return s;
+}
+
+
+static int capsense_proc_write_iic(struct file *file, const char *buf,
+				   unsigned long count, void *data)
+{
+	struct capsense_ctx *capsense = data;
+	char lbuf[count+1];
+	int lnum;
+	char *s;
+
+	/* Only root can do this */
+	if ( !capable(CAP_SYS_ADMIN) )
+		return -EACCES;
+
+	printk(KERN_INFO DRIVER_NAME ": Reading configuration script from /proc/" DRIVER_NAME "/iic (%lu bytes)\n", count);
+
+	memset(lbuf, 0, sizeof(lbuf));
+
+	if (copy_from_user(lbuf, buf, count))
+		return -EFAULT;
+
+	s = lbuf;
+	lnum = 0;
+
+	while ( *s != '\0' ) {
+		char *line;
+		char operation;
+		unsigned char data[255];
+		int size;
+		struct i2c_msg msg;
+		int ret;
+
+		lnum++;
+
+		/* Spot the end of the line */
+		line = s;
+		while ( (*s != '\0') && (*s != '\n') )
+			s++;
+		if ( *s != '\0' )
+			*(s++) = '\0';
+
+		//printk(KERN_INFO DRIVER_NAME ": iic:%d: '%s'\n", lnum, line);
+
+		/* Strip leading blank characters */
+		line = str_skip_blanks(line);
+
+		/* Empty or commented line: skip! */
+		if ( (*line == '\0') || (*line == '#') )
+			continue;
+
+		/* Only accept write operations 'w' */
+		operation = *(line++);
+		if ( operation != 'w' ) {
+			printk(KERN_ERR DRIVER_NAME ": iic:%d: Unknown operation '%c ...' -- skipped\n", lnum, operation);
+			continue;
+		}
+
+		/* Extract data values */
+		size = 0;
+		while ( (*line != '\0') && (size < sizeof(data)) ) {
+			line = str_skip_blanks(line);
+			if ( *line != '\0' )
+				sscanf(line, "%hhx", &data[size++]);
+			line = str_skip_chars(line);
+		}
+
+		{
+			int i;
+
+			printk(KERN_DEBUG DRIVER_NAME ": iic:%d: %c", lnum, operation);
+			for (i = 0; i < size; i++)
+				printk(" %02X", data[i]);
+			printk("\n");
+		}
+
+		/* Do nothing if there are less than 2 data bytes (address, command) */
+		if ( size < 3 ) {
+			printk(KERN_ERR DRIVER_NAME ": iic:%d: Too few data for operation '%c ...' -- skipped\n", lnum, operation);
+			continue;
+		}
+
+		/* First data byte is the i2c device address:
+		   Warn if it does not match the standard i2c address */
+		if ( data[0] != CAPSENSE_I2C_ADDR ) {
+			printk(KERN_WARNING DRIVER_NAME ": iic:%d: WARNING - Specified i2c address (%02X) differs from standard i2c address (%02X)\n", lnum, data[0], CAPSENSE_I2C_ADDR);
+		}
+
+		/* Second data byte is the capsense register:
+		   Warn if changing the device I2C address */
+		if ( data[1] == CAP_I2C_ADDR_DM ) {
+			printk(KERN_WARNING DRIVER_NAME ": iic:%d: WARNING - Changing i2c address to %02X (I2C_ADDR_DM=%02X)\n", lnum, data[2] & 0x7F, data[2]);
+		}
+
+		/* Send command to i2c device */
+		mutex_lock(&capsense->mutex);
+
+		msg.addr = data[0];
+		msg.flags = capsense->client.flags;
+		msg.len = size - 1;
+		msg.buf = data + 1;
+		//printk(KERN_INFO DRIVER_NAME ": iic:%d: i2c transfer: addr=0x%02X flags=0x%04X len=%d\n", lnum, msg.addr, msg.flags, msg.len);
+
+		ret = i2c_transfer(capsense->client.adapter, &msg, 1);
+		if ( ret < 0 )
+			printk(KERN_ERR DRIVER_NAME ": iic:%d: i2c transfer failed (%d), command rejected\n", lnum, ret);
+
+		mutex_unlock(&capsense->mutex);
+	}
+
+	return count;
+}
+
+
+static int capsense_proc_write_command(struct file *file, const char *buf,
+				       unsigned long count, void *data)
+{
+	struct capsense_proc_command *command = data;
+	struct capsense_ctx *capsense = command->capsense;
+
+	/* Only root can do this */
+	if ( !capable(CAP_SYS_ADMIN) )
+		return -EACCES;
+
+	printk(KERN_INFO DRIVER_NAME ": %s (%02X)\n", command->name, command->command);
+
+	mutex_lock(&capsense->mutex);
+	i2c_smbus_write_byte_data(&capsense->client, CAP_COMMAND_REG, CAP_COMMAND_SETUP_MODE);
+	i2c_smbus_write_byte_data(&capsense->client, CAP_COMMAND_REG, command->command);
+	i2c_smbus_write_byte_data(&capsense->client, CAP_COMMAND_REG, CAP_COMMAND_NORMAL_MODE);
+	mutex_unlock(&capsense->mutex);
+
+	return count;
+}
+
+
+static int capsense_proc_init(struct capsense_ctx *capsense)
+{
+	struct proc_dir_entry *root;
+	struct proc_dir_entry *dir;
+	struct proc_dir_entry *ent;
+	int i;
+
+	/* Create capsense proc directory */
+	printk(KERN_INFO DRIVER_NAME ": Creating setup entries in /proc/" DRIVER_NAME "/\n");
+
+	root = proc_mkdir(DRIVER_NAME, NULL);
+	if ( root == NULL ) {
+		printk(KERN_WARNING DRIVER_NAME ": Cannot create directory /proc/" DRIVER_NAME "\n");
+		return -1;
+	}
+
+	root->owner = THIS_MODULE;
+
+	/* Create iic config file dump entry */
+	ent = create_proc_entry("iic", S_IFREG|S_IWUSR, root);
+	if ( ent == NULL ) {
+		printk(KERN_WARNING DRIVER_NAME ": Cannot create entry /proc/" DRIVER_NAME "/iic\n");
+		return -1;
+	}
+
+	ent->owner = THIS_MODULE;
+	ent->data = capsense;
+	ent->write_proc = capsense_proc_write_iic;
+
+	/* Create commands directory */
+	dir = proc_mkdir("commands", root);
+	if ( dir == NULL ) {
+		printk(KERN_WARNING DRIVER_NAME ": Cannot create directory /proc/" DRIVER_NAME "/commands\n");
+		return -1;
+	}
+
+	dir->owner = THIS_MODULE;
+
+	/* Create command entries */
+	for (i = 0; i < ARRAY_SIZE(capsense_proc_commands); i++) {
+		struct capsense_proc_command *command = &capsense_proc_commands[i];
+
+		command->capsense = capsense;
+
+		ent = create_proc_entry(command->name, S_IFREG|S_IWUSR, dir);
+		if ( ent == NULL ) {
+			printk(KERN_WARNING DRIVER_NAME ": Cannot create entry /proc/" DRIVER_NAME "/commands/%s\n", command->name);
+			return -1;
+		}
+
+		ent->owner = THIS_MODULE;
+		ent->data = command;
+		ent->write_proc = capsense_proc_write_command;
+	}
+
+	/* Create device status read entries */
+	for (i = 0; i < ARRAY_SIZE(capsense_proc_device_entries); i++) {
+		struct capsense_proc_entry *entry = &(capsense_proc_device_entries[i]);
+		struct capsense_proc_data *data = &(entry->data[i]);
+
+		data->capsense = capsense;
+		data->phys = NULL;
+		data->name = entry->name;
+		data->command = entry->command;
+		data->hex = 1;
+
+		ent = create_proc_entry(entry->name, S_IFREG|S_IRUSR, root);
+		if ( ent == NULL ) {
+			printk(KERN_WARNING DRIVER_NAME ": Cannot create entry /proc/" DRIVER_NAME "/%s\n", entry->name);
+			continue;
+		}
+
+		ent->owner = THIS_MODULE;
+		ent->data = data;
+		ent->read_proc = capsense_proc_read;
+	}
+
+	/* Create keys management directory */
+	dir = proc_mkdir("keys", root);
+	if ( dir == NULL ) {
+		printk(KERN_WARNING DRIVER_NAME ": Cannot create directory /proc/" DRIVER_NAME "/keys\n");
+		return -1;
+	}
+
+	dir->owner = THIS_MODULE;
+
+	/* Create keys sensitivity adjustment entries */
+	for (i = 0; i < ARRAY_SIZE(phys_keymap); i++) {
+		struct capsense_keymap *phys = &phys_keymap[i];
+		struct proc_dir_entry *subdir;
+		int ientry;
+
+		subdir = proc_mkdir(phys->name, dir);
+		if ( subdir == NULL ) {
+			printk(KERN_WARNING DRIVER_NAME ": Cannot create directory /proc/" DRIVER_NAME "/keys/%s\n", phys->name);
+			continue;
+		}
+
+		for (ientry = 0; ientry < ARRAY_SIZE(capsense_proc_key_entries); ientry++) {
+			struct capsense_proc_entry *entry = &(capsense_proc_key_entries[ientry]);
+			struct capsense_proc_data *data = &(entry->data[i]);
+
+			data->capsense = capsense;
+			data->phys = phys;
+			data->name = entry->name;
+			data->command = CAP_CS(entry->command, phys->port, phys->bit);
+			data->hex = 0;
+
+			ent = create_proc_entry(entry->name, S_IFREG|S_IRUSR|S_IWUSR, subdir);
+			if ( ent == NULL ) {
+				printk(KERN_WARNING DRIVER_NAME ": Cannot create entry /proc/" DRIVER_NAME "/keys/%s/%s\n", phys->name, entry->name);
+				continue;
+			}
+
+			ent->owner = THIS_MODULE;
+			ent->data = data;
+			ent->read_proc = capsense_proc_read;
+			ent->write_proc = capsense_proc_write;
+		}
+	}
+
+	return 0;
+}