aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-05-09fluidsynth: upgrade to 1.1.6Tim Orling
First version had no [PATCH] on subject line and non-helpful "inherit gettext" * now hosted at sourceforge * drop unrecognized option for readline NOTE: autotools is deprecated TODO: investigate cmake build Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-09python-efl: add dependency on elementaryMartin Jansa
* otherwise python-elementary package is created only when elementary was built before python-efl Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-09tk: cleanup & add PACKAGECONFIGMatthieu CRAPET
Changes: - add PACKAGECONFIG "xft" enables XFontConfig features - add PACKAGECONFIG "xss" enables XScreenSaver extension - use ${BPN} and ${PV} - use ${VER} intermediate variable for readability - fulfill LIC_FILES_CHKSUM - remove BINCONFIG_GLOB: inherit binconfig is not present, lib/tkConfig.sh paths are valid - add SSTATE_SCAN_FILES, like it is done in tcl recipe (OE-Core) Note: tcl and tk are sharing the same licence, tcl licence file in commited in OE-Core. Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-09v4l-utils: Update to 1.0.1Otavio Salvador
This updates to last stable release and, as a plus, fix an out of tree build failure. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-07daq: explicitly disable nfq and ipq modulesMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-07daq: Update from 2.0.1 to 2.0.2Alex Lennon
daq-2.0.1.tar.gz is missing from SRC_URI location. Presumably replaced with 2.02. Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-07libmusicbrainz: add dependency on neon-nativeMartin Jansa
* we're building separate native binary make-c-interface which is also checking for neon with pkg-config, when it fails it's not fatal and configure continues to configure target version (which finds neon correctly) but failed native make-c-interface build resultsin this error: -- Found PkgConfig: /OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/pkg-config (found version "0.28") -- checking for module 'neon' -- found neon, version 0.30.0 CMake Error at /OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:108 (message): Could NOT find Neon (missing: NEON_LIBRARIES) Call Stack (most recent call first): /OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:315 (_FPHSA_FAILURE_MESSAGE) cmake/modules/FindNeon.cmake:19 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) CMakeLists.txt:22 (FIND_PACKAGE) -- Configuring incomplete, errors occurred! See also "/OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/libmusicbrainz/5.0.1+gitAUTOINC+0749dd0a35-r1/git/build-native/CMakeFiles/CMakeOutput.log". make: *** No rule to make target 'make-c-interface'. Stop. ... -- Found PkgConfig: /OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/pkg-config (found version "0.28") -- checking for module 'neon' -- found neon, version 0.30.0 -- Found Neon: /OE/build/oe-core/tmp-eglibc/sysroots/qemux86/usr/lib/libneon.so CMake Error at src/CMakeLists.txt:19 (INCLUDE): include could not find load file: /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/libmusicbrainz/5.0.1+gitAUTOINC+0749dd0a35-r1/git/build-native/ImportExecutables.cmake -- Configuring incomplete, errors occurred! Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-07gtkperf: add gtk+ dependencyMartin Jansa
* when there is no gtk+ in sysroot, configure fails to find it but doesn't cause do_configure task to fail :/ configure: WARNING: using cross tools not prefixed with host triplet checking pkg-config is at least version 0.9.0... yes checking for GTK... no * builds fails a bit later with confusing do_install error: ERROR: Function failed: do_install (log file is located at /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/log.do_install.31526) ERROR: Logfile of failure stored in: /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/log.do_install.31526 Log data follows: | DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common'] | DEBUG: Executing shell function do_install | NOTE: make -j 9 DESTDIR=/OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/image install | make: *** No rule to make target 'install'. Stop. | ERROR: oe_runmake failed | WARNING: /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/run.do_install.31526:1 exit 1 from | exit 1 | ERROR: Function failed: do_install (log file is located at /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/log.do_install.31526) NOTE: recipe gtkperf-0.40-r0: task do_install: Failed ERROR: Task 2 (/OE/build/oe-core/meta-openembedded/meta-oe/recipes-graphics/gtkperf/gtkperf_0.40.bb, do_install) failed with exit code '1' Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05dbench: Fix out of tree buildOtavio Salvador
This fixes the Makefile so the client.txt file is copied from the original source tree. This fixes the out of tree build error. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05php: fix do_installing when S!=BKoen Kooi
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05libconfig: inherit from autotools-brokensepAndrea Galbusera
do_compile fails otherwise Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05efl: fix pkg-config files when B!=SMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05ruby: add --enable-wide-getaddrinfo to whitelistMartin Jansa
* fixes: ruby-1.9.3-p429: ruby: configure was passed unrecognised options: --enable-wide-getaddrinfo Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05qt-creator: skip libdir qa check, because it's false positiveMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05gcr: add libgcrypt dependencyMartin Jansa
* otherwise it tries to use libraries from wrong sysroot or sometimes it fails in do_configure already with: | configure.ac:160: warning: macro 'AM_PATH_LIBGCRYPT' not found in library | autoreconf: running: /OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/autoconf --force | configure.ac:160: error: possibly undefined macro: AM_PATH_LIBGCRYPT Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05devicekit-power: add libusb-compat dependencyMartin Jansa
* otherwise do_configure fails with: | configure:14379: result: no | configure:14379: checking for usb.h | configure:14379: result: no | configure:14386: error: Can't find usb.h. Please install libusb. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05coriander: add tiff dependencyMartin Jansa
* otherwise do_compile fails with: thread_save.c:858:18: error: 'SAVE_FORMAT_TIFF' undeclared (first use in this function) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05e.bbclass: Fix do_configure_append for B!=SMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05maliit-framework: add dependency on libxcompositeMartin Jansa
* otherwise fails in do_compile with: | mimremotewindow.cpp:27:39: fatal error: X11/extensions/Xcomposite.h: No such file or directory | #include <X11/extensions/Xcomposite.h> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-05libjpeg-turbo: update 1.3.0 -> 1.3.1Andre McCurdy
This commit also modifies SRC_URI to fetch a release tarfile instead of checking out from SourceForge SVN and makes some minor updates to the jpeg-tools DESCRIPTION text. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-04libhugetlbfs: update srcrev to 2.18 releaseFathi Boudra
* Update recipe: - update SRCREV to latest release, 2.18 - switch back to master branch - increase verbosity (pass V=1 to EXTRA_OEMAKE) to make debugging easier * Drop patches: - fix-lib64-can-not-be-shiped-in-64bit-target.patch replaced by LIBARGS definition. the build system allows to override libdir using LIB32 and LIB64 variables - 0001-install-perl-lib-to-directory-perl-instead-of-perl5.patch replaced by a one-liner to fixup perl module directory hardcoded to perl5 * Refresh skip-checking-LIB32-and-LIB64-if-they-point-to-the-s.patch - only disable the error to skip the check * Add patches: - 0001-aarch64-fix-cross-compilation.patch - submitted upstream allow to override CC and use it for aarch64 case like the other arch - 0001-aarch64-fix-page-size-not-properly-computed.patch - submitted upstream fix typo on MB variable (MB -> $MB) and add the missing linker variants (aarch64elfb, aarch64linux, aarch64linuxb) - 0001-replace-lib-lib64-hardcoded-values-by-LIBDIR32-LIBDI.patch submitted upstream. replace lib/lib64 hardcoded values by LIBDIR32 and LIBDIR64 variables * Remove patches that aren't applied in the recipe (they're all merged upstream and available in 2.18 release): - libhugetlbfs/files/aarch64-support.patch - aarch64-unit-test-fixes.patch - add-PROT-NONE-to-the-mprotest-test.patch Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-04gateone: Updated to version 1.2Dan McDougall
This new version of Gate One uses a new configuration file format which means the old server.conf is gone. It now stores configuration files in /etc/gateone/conf.d. The /opt/gateone directory is also gone and instead the package installs like a regular Python module in site-packages. SSL certificates/keys are stored in /etc/gateone/ssl/. The new version requires python-tornado 3.1.1 (which was submitted earlier today) and the python-futures package (which was also submitted today). An 80oe.conf file has been added specific to OpenEmbedded that replaces the old pre-configured server.conf functionality. The old patch that removes the init script checks has been deprecated by the use of the --skip_init_scripts option which is now being passed to setup.py. Lastly, Gate One 1.2 is about twice as fast (benchmarked) as Gate One 1.1 on the Beaglebone platform. Signed-off-by: Dan McDougall <daniel.mcdougall@liftoffsoftware.com> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-04klcc_cross: move in target sysroot as crossscriptAndrea Adami
Klcc-cross is properly a crosscript so avoid to inherit cross.bbclass and stage it in target sysroot under usr/bin/crossscripts. Minor adjustment is necessary for INSTALLDIR. Finally some magic mangling is applied fixing the paths of sstate so that it is invalidated in case of subsequent builds targeting machines with the same arch and in case of builds sharing the sstate cache. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2014-05-04kexecboot: fix build when S != BAndrea Adami
* temporarily inherit autotools-brokensep * proper fix sent upstream Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2014-05-03lmsensors: update 3.3.3 -> 3.3.5Marc Ferland
This commit also adds a new package (lmsensors-sensorsconfconvert-doc) for the sensors-conf-convert script man page which was added in 3.3.5. Signed-off-by: Marc Ferland <ferlandm@sonatest.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03xdebug: fix for S != BPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03modphp: fix for S != BPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03lighttpd: rename .bbappend to match with any versionMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03fwts: inherit autotools-brokensepKoen Kooi
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03netperf: fix S!=B issuesKoen Kooi
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03libmcrypt: inherit autotools-brokensepKoen Kooi
do_configure fails without it. Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03openldap: inherit autotools-brokensepKoen Kooi
Also remove hack that deletes headers from staging, it's not needed anymore. Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03mariadb: handle seperate builddirKoen Kooi
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03llvm3: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03espeak: install header in proper locationKoen Kooi
This matches debian, also provide symlink for backwards compatibility. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03ruby: remove obsolete extmk_run.patchMichaël Burtin
This patch does nothing except causing failures from the second build in the same working directory. Signed-off-by: Michaël Burtin <mburtin@connected-labs.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03jack: move to gitKoen Kooi
The subversion repository has been closed down. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03libgdata: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03fbset: inherit from autotools-brokensep instead of autotools to fix builddv@pseudoterminal.org
This package will not build with a separate build directory. Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03abiword: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03i2c-tools: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03gimp: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03t1lib: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03gnome-control-center: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03gnome-bluetooth: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03gedit: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03epiphany: Fix build when S != BKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03bonnie++, lmbench, obex-data-server, samba, sg3-utils: Do not do out-of-tree ↵Khem Raj
builds These recipes are not ready yet Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03obexd, gnome-panel: Do not do out-of-tree builds yetKhem Raj
They need changes into components build system Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2014-05-03xfsprogs: Do not do out-of-tree build yetKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-05 19:55:00 +0000