Age | Commit message (Collapse) | Author |
|
*snort - a free lightweight network intrusion detection
system for UNIX and Windows
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
*Barnyard2 is a output system for Snort
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
*dumb networking library
*snort depends libdnet
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
enabled on qemux86-64
While multilib enabled on qemux86-64, accel-ppp-lib should be installed to
'${baselib}/accel-ppp', but the accel-ppp's CMakeLists.txt hardcoded
to install to 'lib/accel-ppp', such as:
...
INSTALL(TARGETS log_file
LIBRARY DESTINATION lib/accel-ppp
)
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
A minimum dnsmasq version of 2.5.9 is required deal with IPv6 link local
addresses. So instead of just going to the minimum version, we can go
all the way to 2.6.3.
As part of this update, the following changes have been made in addition to
the pure version update:
- PR is dropped in favour of PRSERVER functionality
- dhcp_release is added to the default build, since it is used in the
cleanup phase for virtual machines.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
netcf was orginally introduced in meta-virtualization, since it provides
functionality required by libvirt, but it is otherwise not bound to
virtualization.
So we can move it to meta-networking, and in the process uprev to the
the latest 0.2.3 functinality.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
regdbdump and crda are installed in /sbin/ and still link against stuff in
/usr/lib, causing QA warnings / errors:
WARNING: QA Issue: crda: /sbin/regdbdump, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgcrypt.so.11 => /usr/lib64/libgcrypt.so.11 (0x00000000dead1000)
WARNING: QA Issue: crda: /sbin/regdbdump, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgpg-error.so.0 => /usr/lib64/libgpg-error.so.0 (0x00000000dead3000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgcrypt.so.11 => /usr/lib64/libgcrypt.so.11 (0x00000000dead1000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-genl-3.so.200 => /usr/lib64/libnl-genl-3.so.200 (0x00000000dead2000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-3.so.200 => /usr/lib64/libnl-3.so.200 (0x00000000dead3000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-nf-3.so.200 => /usr/lib64/libnl-nf-3.so.200 (0x00000000dead4000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-route-3.so.200 => /usr/lib64/libnl-route-3.so.200 (0x00000000dead5000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgpg-error.so.0 => /usr/lib64/libgpg-error.so.0 (0x00000000dead7000)
relocate them to /usr/sbin to squelch the warning.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
If we build a project without systemd support on a system that has systemd
enabled, the following QA items get flagged:
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/autofs.service
Trying to keep the solution to the problem as contained as possible in a
way that may be accepted up-stream by adding an optional parameter to the
--with-systemd flag.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
* Remove all PR = "r0" from all .bb files in meta-oe repo. This was done
with the command sed -e '/^PR.*=.*r0\"/d' meta*/recipes*/*/*.bb -i
* We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* make files in bindir/sbindir a bit more deterministic
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Inherit update-alternatives to avoid duplicate code.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
We can use chmod to set the SUID bit for applications in the do_install
task. If we do so, the pkg_postinsts are no longer needed.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
This patch mainly involves two changes.
1. Create necessary files at do_install task. Add these configuration
files to the CONFFILES variable.
2. Move the `chmod' and `chown' commands to do_install task.
After these two changes, qugga can run successfully at rootfs time.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
`/etc/init.d/populate-volatile.sh update' only needs to run in case
of an on-target installation. And it should have a prerequisite that
the script is executable.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
saslpasswd2 is used by an administrator to set a user's sasl password,
setting a default one in pkg_postinst in not only unnecessary but also
inappropriate.
Besides, running saslpasswd2 takes a significant amount of time to finish,
so this pkg_postinst will make the first boot take longer time.
According to the above two reasons, the patch remove the pkg_postint.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
While making use of the cyrus-sasl library an external application
will most likely include sasl.h which will cause compilation failures
if steps haven't been taken to define size_t. This should not be the
responsibility of the application building against the sasl library
but rather handled already in sasl.h. Here we ensure sasl.h has the
proper includes to have size_t defined before it is used.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
There are two problems for ripd implementation after received
SIGHUP signal:
1). ripd didn't clean up ifp->connected list before reload
configuration file which makes the same advertise packet
being sent multiple times(depends on how many SIGHUP was recieved).
2). ripd reset ri->split_horizon flag to RIP_NO_SPLIT_HORIZON
during restart which is different from the flag when ripd is
firstly started up, leading to unnecessary route to be advertised.
[YOCTO #5266]
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
configure python files installation path or else it will use the
default value /usr/lib/python*, which is wrong on 64bit and multilibs
enabled system
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
The tftp-hpa package installs /var/lib/tftpboot and tftpd-hpa is
configured to use that directory, but the default points at /svc/tftpboot.
Correct that so the default points to a location that exists when the
package is installed.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Add --ignore-fail-on-non-empty for rmdir in case there are files in the
directories.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
If ${D}/run doesn't exist, the following statement will have non-zero
exit code, which leads to do_install failure.
test -d ${D}/run && rmdir ${D}/run
Modify it to use the if statement to make the do_install task succeed
no matter ${D}/run exists or not.
Also, this patch removes the unused /var/run directory. Leaving that
directory there will result in /run directory created before splitting
package, which in turn lead to 'installed-vs-shipped' QA error or QA
warning.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
"test -z ${PAMLIB}" in do_install() may report error if ${PAMLIB}
has space chars. This commit added double quotes to wrap it in
case of errors.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Otherwise, configure will try to auto-detect using host paths.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
standalone daemon exits as recipe installs file as tftpd-hpa
* Changed script so it can consult /etc/default, as daemon name may be
subject to change.
* Changed the default name to match the recipe
Signed-off-by: David Turgeon <david.turgeon@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Without this patch, netperf2.6 can only
support files smaller than 2GB with TCP_SENDFILE item.
Signed-off-by: Ting Liu <b28495@freescale.com>
Tested-by: Jianhua Xie<jianhua.xie@freescale.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Based on work by David Nyström (meta-virtualization) and Laszlo Papp
(meta-oe).
- Import OpenFlow 1.0 from meta-virtualization and provide an updated
version of the recipe for the head of tree in the OpenFlow git
repository.
- Minor tweak in both recipes for do_install_append() spacing.
- Update 'libssl' PACKAGECONFIG flag in both to follow the 'openssl'
convention used elsewhere in meta-oe.
- Create common include file for both versioned and git recipes.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
The 0.3 release was a year ago and git HEAD contains fixes to make it
work with contiki, so build from git instead of backporting all of the
patches.
Based on a patch by Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Change default value of secure_chroot_dir to /var/run/vsftpd/empty, add
volatiles entry for it, to ensure it won't fail to start with error:
"500 OOPS: vsftpd: not found: directory given in 'secure_chroot_dir':/var/share/empty"
This shows up in both standalone mode or started by xined.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Fix babeld_option to make babeld start correctly.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Taken from [1]:
"However, if the difference between the client time and server time is greater
than the panic threshold, which defaults to 1000 s, the daemon will send a
message to the system log and shut down without setting the clock."
On RTC-less or 'fresh' systems with unpredicatble inital date ntpd will stop
with work undone (note: I did NOT find the message mentioned above - so it
took long way to fix). This is a wide use case for using NTP in production:
No need for initial datetime setup by some operator.
[1] http://doc.ntp.org/4.1.1/debug.htm
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
This directory is empty and is flagged by QA checker
ERROR: QA Issue: inetutils: Files/directories were installed but not
shipped
/usr/lib
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Correct the warning:
quagga-0.99.21: The /usr/share/info/dir file is not meant to be shipped in a particular package.
Simply remove the installed 'dir' file if info docs are installed.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Add error check when the write-buffer is finally flushed to the file,
the caller can detect if the disk filled up (or had an i/o error) and
return a NOSAPCE nak to the other side.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
1. quagga should depend on iproute2, since ip from busybox is not sufficient
2. fix a typOS(should chmod, not chown)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
Adopting the common convention of naming BBFILE_COLLECTIONS to be
<layername>-layer.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
The latest stable quagga adopted this patch:
http://git.savannah.gnu.org/gitweb/?p=quagga.git;a=commit;h=b58c90807c9d0bfa9601704c7490a16070906004
to repair a documentation build error. Trivial backport.
Signed-off-by: Joe MacDonald <joe@deserted.net>
|
|
This fixes the build on at least Fedora 19 x86_64 as a host; we were
trying to link a non-PIC static object into a shared library.
Signed-off-by: Colin Walters <walters@verbum.org>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
|
|
A minor bit of reorganization of the cyrus-sasl recipe directory in
preparation for a build fix.
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
|
|
* read-only rootfs cannot run postinsts on first boot and in this case
it doesn't really have to as we can create cron task in do_rootfs
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
|