diff options
Diffstat (limited to 'meta-oe/recipes-core/systemd/systemd_v189.bb')
| -rw-r--r-- | meta-oe/recipes-core/systemd/systemd_v189.bb | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/meta-oe/recipes-core/systemd/systemd_v189.bb b/meta-oe/recipes-core/systemd/systemd_v189.bb new file mode 100644 index 0000000000..613f703ba0 --- /dev/null +++ b/meta-oe/recipes-core/systemd/systemd_v189.bb @@ -0,0 +1,232 @@ +DESCRIPTION = "Systemd a init replacement" +HOMEPAGE = "http://www.freedesktop.org/wiki/Software/systemd" + +LICENSE = "GPLv2 & LGPLv2.1 & MIT" +LIC_FILES_CHKSUM = "file://LICENSE.GPL2;md5=751419260aa954499f7abaabaa882bbe \ + file://LICENSE.LGPL2.1;md5=fb919cc88dbe06ec0b0bd50e001ccf1f \ + file://LICENSE.MIT;md5=544799d0b492f119fa04641d1b8868ed" + +PROVIDES = "udev" + +DEPENDS = "xz kmod docbook-sgml-dtd-4.1-native intltool-native gperf-native acl readline dbus libcap libcgroup tcp-wrappers usbutils glib-2.0 libgcrypt" +DEPENDS += "${@base_contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}" + +SERIAL_CONSOLE ?= "115200 /dev/ttyS0" + +SECTION = "base/shell" + +PR = "r6" + +inherit useradd pkgconfig autotools perlnative + +SRCREV = "38a60d7112d33ffd596b23e8df53d75a7c09e71b" + +SRC_URI = "git://anongit.freedesktop.org/systemd/systemd;protocol=git \ + file://use-rootlibdir.patch \ + file://gtk-doc.make \ + file://touchscreen.rules \ + file://modprobe.rules \ + file://var-run.conf \ + ${UCLIBCPATCHES} \ + " +UCLIBCPATCHES = "" +UCLIBCPATCHES_libc-uclibc = "file://systemd-pam-configure-check-uclibc.patch \ + file://systemd-pam-fix-execvpe.patch \ + file://systemd-pam-fix-fallocate.patch \ + file://systemd-pam-fix-getty-unit.patch \ + file://systemd-pam-fix-mkostemp.patch \ + file://systemd-pam-fix-msformat.patch \ + " +LDFLAGS_libc-uclibc_append = " -lrt" + +S = "${WORKDIR}/git" + +SYSTEMDDISTRO ?= "debian" +SYSTEMDDISTRO_angstrom = "angstrom" + +CACHED_CONFIGUREVARS = "ac_cv_file__usr_share_pci_ids=no \ + ac_cv_file__usr_share_hwdata_pci_ids=no \ + ac_cv_file__usr_share_misc_pci_ids=yes" +# The gtk+ tools should get built as a separate recipe e.g. systemd-tools +EXTRA_OECONF = " --with-distro=${SYSTEMDDISTRO} \ + --with-rootprefix=${base_prefix} \ + --with-rootlibdir=${base_libdir} \ + --sbindir=${base_sbindir} \ + --libexecdir=${base_libdir} \ + ${@base_contains('DISTRO_FEATURES', 'pam', '--enable-pam', '--disable-pam', d)} \ + --enable-xz \ + --disable-manpages \ + --disable-coredump \ + --disable-introspection \ + --with-pci-ids-path=/usr/share/misc \ + --disable-gtk-doc-html \ + --disable-tcpwrap \ + --enable-split-usr \ + " + +# There's no docbook-xsl-native, so for the xsltproc check to false +do_configure_prepend() { + export CPP="${HOST_PREFIX}cpp ${TOOLCHAIN_OPTIONS} ${HOST_CC_ARCH}" + sed -i /xsltproc/d configure.ac + + cp ${WORKDIR}/gtk-doc.make ${S}/docs/ + + # we only have /home/root, not /root + sed -i -e 's:=/root:=/home/root:g' units/*.service* +} + +do_install() { + autotools_do_install + # provided by a seperate recipe + rm ${D}${systemd_unitdir}/system/serial-getty* -f + + # provide support for initramfs + ln -s ${systemd_unitdir}/systemd ${D}/init + + # create dir for journal + install -d ${D}${localstatedir}/log/journal + + # create machine-id + # 20:12 < mezcalero> koen: you have three options: a) run systemd-machine-id-setup at install time, b) have / read-only and an empty file there (for stateless) and c) boot with / writable + touch ${D}${sysconfdir}/machine-id + + install -m 0644 ${WORKDIR}/*.rules ${D}${sysconfdir}/udev/rules.d/ + + install -m 0644 ${WORKDIR}/var-run.conf ${D}${sysconfdir}/tmpfiles.d/ +} + +python populate_packages_prepend (){ + systemdlibdir = d.getVar("base_libdir", True) + do_split_packages(d, systemdlibdir, '^lib(.*)\.so\.*', 'lib%s', 'Systemd %s library', extra_depends='', allow_links=True) +} + +PACKAGES =+ "${PN}-gui ${PN}-vconsole-setup ${PN}-initramfs ${PN}-analyze" + +USERADD_PACKAGES = "${PN}" +GROUPADD_PARAM_${PN} = "-r lock" + +FILES_${PN}-analyze = "${bindir}/systemd-analyze" +RDEPENDS_${PN}-analyze = "python-dbus" +RRECOMMENDS_${PN}-analyze = "python-pycairo" + +FILES_${PN}-initramfs = "/init" +RDEPENDS_${PN}-initramfs = "${PN}" + +FILES_${PN}-gui = "${bindir}/systemadm" + +FILES_${PN}-vconsole-setup = "${systemd_unitdir}/systemd-vconsole-setup \ + ${systemd_unitdir}/system/systemd-vconsole-setup.service \ + ${systemd_unitdir}/system/sysinit.target.wants/systemd-vconsole-setup.service" + +RRECOMMENDS_${PN}-vconsole-setup = "kbd kbd-consolefonts" + +FILES_${PN} = " ${base_bindir}/* \ + ${datadir}/dbus-1/services \ + ${datadir}/dbus-1/system-services \ + ${datadir}/polkit-1 \ + ${datadir}/${PN} \ + ${sysconfdir}/bash_completion.d/ \ + ${sysconfdir}/binfmt.d/ \ + ${sysconfdir}/dbus-1/ \ + ${sysconfdir}/machine-id \ + ${sysconfdir}/modules-load.d/ \ + ${sysconfdir}/sysctl.d/ \ + ${sysconfdir}/systemd/ \ + ${sysconfdir}/tmpfiles.d/ \ + ${sysconfdir}/xdg/ \ + ${systemd_unitdir}/* \ + ${systemd_unitdir}/system/* \ + ${base_libdir}/udev/rules.d/99-systemd.rules \ + ${base_libdir}/security/*.so \ + /cgroup \ + ${bindir}/systemd* \ + ${libdir}/tmpfiles.d/*.conf \ + ${libdir}/systemd \ + ${libdir}/binfmt.d \ + ${libdir}/modules-load.d \ + ${libdir}/sysctl.d \ + ${localstatedir} \ + ${libexecdir} \ + ${base_libdir}/udev/rules.d/70-uaccess.rules \ + ${base_libdir}/udev/rules.d/71-seat.rules \ + ${base_libdir}/udev/rules.d/73-seat-late.rules \ + ${base_libdir}/udev/rules.d/99-systemd.rules \ + " + +FILES_${PN}-dbg += "${systemd_unitdir}/.debug ${systemd_unitdir}/*/.debug ${base_libdir}/security/.debug/" +FILES_${PN}-dev += "${base_libdir}/security/*.la ${datadir}/dbus-1/interfaces/ ${sysconfdir}/rpm/macros.systemd" + +RDEPENDS_${PN} += "dbus-systemd udev-systemd" + +# kbd -> loadkeys,setfont +# systemd calls 'modprobe -sab --', which busybox doesn't support due to lack +# of blacklist support, so use proper modprobe from module-init-tools +# And pull in the kernel modules mentioned in INSTALL +# swapon -p is also not supported by busybox +# busybox mount is broken +RRECOMMENDS_${PN} += "systemd-serialgetty \ + util-linux-agetty \ + util-linux-swaponoff \ + util-linux-fsck e2fsprogs-e2fsck \ + module-init-tools \ + util-linux-mount util-linux-umount \ + kernel-module-autofs4 kernel-module-unix kernel-module-ipv6 \ +" + +PACKAGES =+ "udev-dbg udev udev-consolekit udev-utils udev-systemd" + +FILES_udev-dbg += "${base_libdir}/udev/.debug" + +RDEPENDS_udev += "udev-utils" +RPROVIDES_udev = "hotplug" + +FILES_udev += "${base_libdir}/udev/udevd \ + ${base_libdir}/systemd/systemd-udevd \ + ${base_libdir}/udev/accelerometer \ + ${base_libdir}/udev/ata_id \ + ${base_libdir}/udev/cdrom_id \ + ${base_libdir}/udev/collect \ + ${base_libdir}/udev/findkeyboards \ + ${base_libdir}/udev/keyboard-force-release.sh \ + ${base_libdir}/udev/keymap \ + ${base_libdir}/udev/mtd_probe \ + ${base_libdir}/udev/scsi_id \ + ${base_libdir}/udev/v4l_id \ + ${base_libdir}/udev/keymaps \ + ${base_libdir}/udev/rules.d/4*.rules \ + ${base_libdir}/udev/rules.d/5*.rules \ + ${base_libdir}/udev/rules.d/6*.rules \ + ${base_libdir}/udev/rules.d/70-power-switch.rules \ + ${base_libdir}/udev/rules.d/75*.rules \ + ${base_libdir}/udev/rules.d/78*.rules \ + ${base_libdir}/udev/rules.d/8*.rules \ + ${base_libdir}/udev/rules.d/95*.rules \ + ${sysconfdir}/udev \ + " + +FILES_udev-consolekit += "${libdir}/ConsoleKit" +RDEPENDS_udev-consolekit += "${@base_contains('DISTRO_FEATURES', 'x11', 'consolekit', '', d)}" + +FILES_udev-utils = "${bindir}/udevadm" + +FILES_udev-systemd = "${base_libdir}/systemd/system/*udev* ${base_libdir}/systemd/system/*.wants/*udev*" +RDEPENDS_udev-systemd = "udev" + +# TODO: +# u-a for runlevel and telinit + +pkg_postinst_systemd () { +update-alternatives --install ${base_sbindir}/init init ${systemd_unitdir}/systemd 300 +update-alternatives --install ${base_sbindir}/halt halt ${base_bindir}/systemctl 300 +update-alternatives --install ${base_sbindir}/reboot reboot ${base_bindir}/systemctl 300 +update-alternatives --install ${base_sbindir}/shutdown shutdown ${base_bindir}/systemctl 300 +update-alternatives --install ${base_sbindir}/poweroff poweroff ${base_bindir}/systemctl 300 +} + +pkg_prerm_systemd () { +update-alternatives --remove init ${systemd_unitdir}/systemd +update-alternatives --remove halt ${base_bindir}/systemctl +update-alternatives --remove reboot ${base_bindir}/systemctl +update-alternatives --remove shutdown ${base_bindir}/systemctl +update-alternatives --remove poweroff ${base_bindir}/systemctl +} |