Age | Commit message (Collapse) | Author |
|
Refer to other distro,make opencv-ts create share library intead of static.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Disable audio codecs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The build for xstdcmap was failing in do_configure due to the missing
xmu package. The libxmu inside the recipe should have been DEPENDS
and not RDEPENDS.
Since this is working, xstdcmap is unblacklist-ed from the build.
Signed-off-by: Stanley Cheong Kwan, Phoong <stanley.cheong.kwan.phoong@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Add gettext-native dependency to use autopoint.
When building rrdtool for a 'tiny' distro, ie one that does
not have internationalization support in glibc, configure
fails with the error:
autoreconf: failed to run autopoint: No such file or directory
autopoint is part of gettext so add that native dependency.
This must happen transitively for builds using a regular configuration
of glibc.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
In xerces-c's configure, these options is being referred as follows:
......
curl_flags="-I$with_curl/include"
curl_libs="-L$with_curl/lib -lcurl"
icu_flags="-I$with_icu/include"
icu_libs="-L$with_icu/lib -licuuc -licudata"
......
so they shouldn't be set to ${STAGING_DIR}, use
${STAGING_DIR_TARGET}${prefix} instead.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Missing pkgconfig does not let build the package.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
LICENSE changes are due to copyright year increments and
a URL changing from http to https.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Upgrade lvm2 from 2.02.166 to 2.02.171.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
1) Upgrade lua from 5.3.3 to 5.3.4.
2) License checksum changed,since the copyright years were updated.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* Needed for PyQt-5.8.2, a recipe I am looking at again.
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Upgrade libssh2 from 1.7.0 to 1.8.0.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
With the latest version out of tree builds are broken.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
1) Upgrade luajit from 2.0.4 to 2.0.5.
2) License checksum changed,since the copyright years were updated.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
when X11 is not in distro features it tries to link with
libGL which does not exist and compile fails
Add a patch to add foreign option to AUTOMAKE_OPTIONS
which lets it configure and relax automake rules to not
check for some GNU specific files
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Changed in V4:
Add the tag: meta-oe
1. Different version php have different libphp*.so, so we need to install its
corresponding libphp*.so, for example:
php-7.1.0 libphp7.so
php-5.6.26 libphp5.so
2. Fix php-5.6.26 compiling errors:
ld: TSRM/.libs/TSRM.o: undefined reference to symbol
'pthread_sigmask@@GLIBC_2.2.5'
error adding symbols: DSO missing from command line
3. Create a configure script like 70_mod_php5, we name it 70_mod_php7, this
file connect the php7 and the apache2, so they work together to let the
LAMP works correctly.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The phoronix-test-suite was in blacklist, because the php-cli can't work,
the php-cli can work now, so remove it from blacklist.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
when using userland it does not work since it needs
libgbm from mesa.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
It was removed from oe-core, but is required by smartmontools.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
libpng 1.2 is being removed from oe-core as it's well obsolete.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
It hasn't been updated upstream since 2012, and relies on outdated libpng 1.2
(which is being removed from oe-core).
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
It has been moved to oe-core.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
When a connection upgrade is requested and when the
request sent an error reply, it happened most often
that a segmentation fault occured.
The patch applied here is a backport from the
upstream (see https://gnunet.org/git/libmicrohttpd.git/
commit b4216c60fdb5b48f6cfec416301fc63a1167e6cd).
Change-Id: I6847550ba2c4fc24d5caf8912ac6d5ac89ae01fb
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Adds a recipe for openocd. Based on recipe found in meta-zephyr.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
When build crash with mips:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mips-linux-nat.c:157:1: error: conflicting types for 'ps_get_thread_area'
ps_get_thread_area (const struct ps_prochandle *ph,
^~~~~~~~~~~~~~~~~~
In file included from gdb_proc_service.h:26:0,
from mips-linux-nat.c:32:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This problem have been fixed on intel and arm plantform, we can use the
similar approch to fix it on mips.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
wvstreams and wvdial
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
With opencv-3.2, the configuration detects if the target supports
half-precision floating-point format. This fails to compile for some
Intel targets such as skylake with an error such as:
error: '_mm_cvtph_ps' was not declared in this scope
The configuration used to work in opencv-3.1 so revert two commits to
drop the FP16 detection even though it may make opencv slower.
The only change in the configure log is:
- FP16: Compiler support is available
+ FP16: Compiler support is not available
The patch should be dropped when a newer version of opencv that includes commit:
https://github.com/opencv/opencv/commit/e5d9b608c47d54e43496041595025fa282fa9de5
is available. Backporting that fix was complicated.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
This reverts commit 51fbd3cf7db14399bc1c69c4a5fd63f157fd209d.
The long log was truncated due to a formatting error.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Since libdevmapper was split out from lvm2, it now needs its own entry
to disable building with -fpie.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The empty pkgconfif directory causes error when run
relocatable_native_pcfiles:
| sed: can't read /path/to/recipe-sysroot-native/usr/lib/pkgconfig/*.pc: No such file or directory
So remove the directory instead of removing the pc file
but left an empty pkgconfig diretory.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Upgrade cryptsetup from 1.7.2 to 1.7.4.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
- use release tarball instead of git
- move libevent, python and glib into PACKAGECONFIG
- add NOTICE file to copyright check
- split into multiple packages
- libthrift for libaries
- thrift-compiler for compiler
- thrift pulls in everything as before
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
With opencv-3.2, the configuration detects if the target supports
half-precision floating-point format. This fails to compile for some
Intel targets such as skylake with an error such as:
error: '_mm_cvtph_ps' was not declared in this scope
The configuration worked in opencv-3.1 so revert two commits to
drop the FP16 detection even though it may make opencv slower.
The only change in the configure log is:
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Utility for IPMI control which is for interfacing with
devices that support the Intelligent Platform Management
Interface specification.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
OpenIPMI is an effort to create a full-function IPMI
system to allow full access to all IPMI information
on a server and to abstract it to a level that will
make it easy to use.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
1) Upgrade hostapd from 2.5 to 2.6.
2) License checksum changed,since the copyright years were updated.
2) Delete patch "0001-WPS-Reject-a-Credential-with-invalid-passphrase.patch", since it is integrated upstream.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Upgrade libedit from 20160903-3.1 to 20170329-3.1.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Doesnt compile yet with PIE turned on
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
backport patch to remove double const in decls
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Helps fixing build with gcc 7
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Fixes
Package xkbcommon was not found in the pkg-config search path.
Perhaps you should add the directory containing `xkbcommon.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xkbcommon' found
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|